llvm-project/llvm/lib/MC/ELFObjectWriter.cpp

1385 lines
47 KiB
C++
Raw Normal View History

//===- lib/MC/ELFObjectWriter.cpp - ELF File Writer -----------------------===//
//
// The LLVM Compiler Infrastructure
//
// This file is distributed under the University of Illinois Open Source
// License. See LICENSE.TXT for details.
//
//===----------------------------------------------------------------------===//
//
// This file implements ELF object file writer information.
//
//===----------------------------------------------------------------------===//
#include "llvm/MC/MCELFObjectWriter.h"
#include "llvm/ADT/STLExtras.h"
#include "llvm/ADT/SmallPtrSet.h"
#include "llvm/ADT/SmallString.h"
#include "llvm/ADT/StringMap.h"
#include "llvm/MC/MCAsmBackend.h"
Reimplement debug info compression by compressing the whole section, rather than a fragment. To support compressing the debug_line section that contains multiple fragments (due, I believe, to variation in choices of line table encoding depending on the size of instruction ranges in the actual program code) we needed to support compressing multiple MCFragments in a single pass. This patch implements that behavior by mutating the post-relaxed and relocated section to be the compressed form of its former self, including renaming the section. This is a more flexible (and less invasive, to a degree) implementation that will allow for other features such as "use compression only if it's smaller than the uncompressed data". Compressing debug_frame would be a possible further extension to this work, but I've left it for now. The hurdle there is alignment sections - which might require going as far as to refactor MCAssembler.cpp:writeFragment to handle writing to a byte buffer or an MCObjectWriter (there's already a virtual call there, so it shouldn't add substantial compile-time cost) which could in turn involve refactoring MCAsmBackend::writeNopData to use that same abstraction... which involves touching all the backends. This would remove the limited handling of fragment writing seen in ELFObjectWriter.cpp:getUncompressedData which would be nice - but it's more invasive. I did discover that I (perhaps obviously) don't need to handle relocations when I rewrite the fragments - since the relocations have already been applied and computed (and stored into ELFObjectWriter::Relocations) by this stage (necessarily, because we need to have written any immediate values or assembly-time relocations into the data already before we compress it, which we have). The test case doesn't necessarily cover that in detail - I can add more test coverage if that's preferred. llvm-svn: 205990
2014-04-11 05:53:53 +08:00
#include "llvm/MC/MCAsmInfo.h"
#include "llvm/MC/MCAsmLayout.h"
#include "llvm/MC/MCAssembler.h"
#include "llvm/MC/MCContext.h"
#include "llvm/MC/MCExpr.h"
#include "llvm/MC/MCFixupKindInfo.h"
#include "llvm/MC/MCObjectWriter.h"
#include "llvm/MC/MCSectionELF.h"
#include "llvm/MC/MCSymbolELF.h"
#include "llvm/MC/MCValue.h"
#include "llvm/MC/StringTableBuilder.h"
Reimplement debug info compression by compressing the whole section, rather than a fragment. To support compressing the debug_line section that contains multiple fragments (due, I believe, to variation in choices of line table encoding depending on the size of instruction ranges in the actual program code) we needed to support compressing multiple MCFragments in a single pass. This patch implements that behavior by mutating the post-relaxed and relocated section to be the compressed form of its former self, including renaming the section. This is a more flexible (and less invasive, to a degree) implementation that will allow for other features such as "use compression only if it's smaller than the uncompressed data". Compressing debug_frame would be a possible further extension to this work, but I've left it for now. The hurdle there is alignment sections - which might require going as far as to refactor MCAssembler.cpp:writeFragment to handle writing to a byte buffer or an MCObjectWriter (there's already a virtual call there, so it shouldn't add substantial compile-time cost) which could in turn involve refactoring MCAsmBackend::writeNopData to use that same abstraction... which involves touching all the backends. This would remove the limited handling of fragment writing seen in ELFObjectWriter.cpp:getUncompressedData which would be nice - but it's more invasive. I did discover that I (perhaps obviously) don't need to handle relocations when I rewrite the fragments - since the relocations have already been applied and computed (and stored into ELFObjectWriter::Relocations) by this stage (necessarily, because we need to have written any immediate values or assembly-time relocations into the data already before we compress it, which we have). The test case doesn't necessarily cover that in detail - I can add more test coverage if that's preferred. llvm-svn: 205990
2014-04-11 05:53:53 +08:00
#include "llvm/Support/Compression.h"
#include "llvm/Support/Debug.h"
#include "llvm/Support/ELF.h"
#include "llvm/Support/Endian.h"
#include "llvm/Support/ErrorHandling.h"
#include "llvm/Support/StringSaver.h"
#include <vector>
using namespace llvm;
#undef DEBUG_TYPE
#define DEBUG_TYPE "reloc-info"
namespace {
typedef DenseMap<const MCSectionELF *, uint32_t> SectionIndexMapTy;
class ELFObjectWriter;
class SymbolTableWriter {
ELFObjectWriter &EWriter;
bool Is64Bit;
// indexes we are going to write to .symtab_shndx.
std::vector<uint32_t> ShndxIndexes;
// The numbel of symbols written so far.
unsigned NumWritten;
void createSymtabShndx();
template <typename T> void write(T Value);
public:
SymbolTableWriter(ELFObjectWriter &EWriter, bool Is64Bit);
void writeSymbol(uint32_t name, uint8_t info, uint64_t value, uint64_t size,
uint8_t other, uint32_t shndx, bool Reserved);
ArrayRef<uint32_t> getShndxIndexes() const { return ShndxIndexes; }
};
class ELFObjectWriter : public MCObjectWriter {
static uint64_t SymbolValue(const MCSymbol &Sym, const MCAsmLayout &Layout);
static bool isInSymtab(const MCAsmLayout &Layout, const MCSymbolELF &Symbol,
bool Used, bool Renamed);
/// Helper struct for containing some precomputed information on symbols.
struct ELFSymbolData {
const MCSymbolELF *Symbol;
uint32_t SectionIndex;
StringRef Name;
// Support lexicographic sorting.
bool operator<(const ELFSymbolData &RHS) const {
unsigned LHSType = Symbol->getType();
unsigned RHSType = RHS.Symbol->getType();
if (LHSType == ELF::STT_SECTION && RHSType != ELF::STT_SECTION)
return false;
if (LHSType != ELF::STT_SECTION && RHSType == ELF::STT_SECTION)
return true;
if (LHSType == ELF::STT_SECTION && RHSType == ELF::STT_SECTION)
return SectionIndex < RHS.SectionIndex;
return Name < RHS.Name;
}
};
/// The target specific ELF writer instance.
std::unique_ptr<MCELFObjectTargetWriter> TargetObjectWriter;
DenseMap<const MCSymbolELF *, const MCSymbolELF *> Renames;
llvm::DenseMap<const MCSectionELF *, std::vector<ELFRelocationEntry>>
Relocations;
/// @}
/// @name Symbol Table Data
/// @{
BumpPtrAllocator Alloc;
StringSaver VersionSymSaver{Alloc};
StringTableBuilder StrTabBuilder{StringTableBuilder::ELF};
/// @}
// This holds the symbol table index of the last local symbol.
unsigned LastLocalSymbolIndex;
// This holds the .strtab section index.
unsigned StringTableIndex;
// This holds the .symtab section index.
unsigned SymbolTableIndex;
// Sections in the order they are to be output in the section table.
std::vector<const MCSectionELF *> SectionTable;
unsigned addToSectionTable(const MCSectionELF *Sec);
// TargetObjectWriter wrappers.
bool is64Bit() const { return TargetObjectWriter->is64Bit(); }
bool hasRelocationAddend() const {
return TargetObjectWriter->hasRelocationAddend();
}
unsigned getRelocType(MCContext &Ctx, const MCValue &Target,
const MCFixup &Fixup, bool IsPCRel) const {
return TargetObjectWriter->getRelocType(Ctx, Target, Fixup, IsPCRel);
}
void align(unsigned Alignment);
bool maybeWriteCompression(uint64_t Size,
SmallVectorImpl<char> &CompressedContents,
bool ZLibStyle, unsigned Alignment);
public:
ELFObjectWriter(MCELFObjectTargetWriter *MOTW, raw_pwrite_stream &OS,
bool IsLittleEndian)
: MCObjectWriter(OS, IsLittleEndian), TargetObjectWriter(MOTW) {}
void reset() override {
Renames.clear();
Relocations.clear();
StrTabBuilder.clear();
SectionTable.clear();
MCObjectWriter::reset();
}
~ELFObjectWriter() override;
void WriteWord(uint64_t W) {
if (is64Bit())
write64(W);
else
write32(W);
}
template <typename T> void write(T Val) {
if (IsLittleEndian)
support::endian::Writer<support::little>(getStream()).write(Val);
else
support::endian::Writer<support::big>(getStream()).write(Val);
}
void writeHeader(const MCAssembler &Asm);
void writeSymbol(SymbolTableWriter &Writer, uint32_t StringIndex,
ELFSymbolData &MSD, const MCAsmLayout &Layout);
// Start and end offset of each section
typedef std::map<const MCSectionELF *, std::pair<uint64_t, uint64_t>>
SectionOffsetsTy;
bool shouldRelocateWithSymbol(const MCAssembler &Asm,
const MCSymbolRefExpr *RefA,
const MCSymbol *Sym, uint64_t C,
unsigned Type) const;
void recordRelocation(MCAssembler &Asm, const MCAsmLayout &Layout,
const MCFragment *Fragment, const MCFixup &Fixup,
MCValue Target, bool &IsPCRel,
uint64_t &FixedValue) override;
// Map from a signature symbol to the group section index
typedef DenseMap<const MCSymbol *, unsigned> RevGroupMapTy;
/// Compute the symbol table data
///
/// \param Asm - The assembler.
/// \param SectionIndexMap - Maps a section to its index.
/// \param RevGroupMap - Maps a signature symbol to the group section.
void computeSymbolTable(MCAssembler &Asm, const MCAsmLayout &Layout,
const SectionIndexMapTy &SectionIndexMap,
const RevGroupMapTy &RevGroupMap,
SectionOffsetsTy &SectionOffsets);
MCSectionELF *createRelocationSection(MCContext &Ctx,
const MCSectionELF &Sec);
const MCSectionELF *createStringTable(MCContext &Ctx);
void executePostLayoutBinding(MCAssembler &Asm,
const MCAsmLayout &Layout) override;
void writeSectionHeader(const MCAsmLayout &Layout,
const SectionIndexMapTy &SectionIndexMap,
const SectionOffsetsTy &SectionOffsets);
void writeSectionData(const MCAssembler &Asm, MCSection &Sec,
const MCAsmLayout &Layout);
void WriteSecHdrEntry(uint32_t Name, uint32_t Type, uint64_t Flags,
uint64_t Address, uint64_t Offset, uint64_t Size,
uint32_t Link, uint32_t Info, uint64_t Alignment,
uint64_t EntrySize);
void writeRelocations(const MCAssembler &Asm, const MCSectionELF &Sec);
bool isSymbolRefDifferenceFullyResolvedImpl(const MCAssembler &Asm,
const MCSymbol &SymA,
const MCFragment &FB, bool InSet,
bool IsPCRel) const override;
bool isWeak(const MCSymbol &Sym) const override;
void writeObject(MCAssembler &Asm, const MCAsmLayout &Layout) override;
void writeSection(const SectionIndexMapTy &SectionIndexMap,
uint32_t GroupSymbolIndex, uint64_t Offset, uint64_t Size,
const MCSectionELF &Section);
};
} // end anonymous namespace
void ELFObjectWriter::align(unsigned Alignment) {
uint64_t Padding = OffsetToAlignment(getStream().tell(), Alignment);
WriteZeros(Padding);
}
unsigned ELFObjectWriter::addToSectionTable(const MCSectionELF *Sec) {
SectionTable.push_back(Sec);
StrTabBuilder.add(Sec->getSectionName());
return SectionTable.size();
}
void SymbolTableWriter::createSymtabShndx() {
if (!ShndxIndexes.empty())
return;
ShndxIndexes.resize(NumWritten);
}
template <typename T> void SymbolTableWriter::write(T Value) {
EWriter.write(Value);
}
SymbolTableWriter::SymbolTableWriter(ELFObjectWriter &EWriter, bool Is64Bit)
: EWriter(EWriter), Is64Bit(Is64Bit), NumWritten(0) {}
void SymbolTableWriter::writeSymbol(uint32_t name, uint8_t info, uint64_t value,
uint64_t size, uint8_t other,
uint32_t shndx, bool Reserved) {
bool LargeIndex = shndx >= ELF::SHN_LORESERVE && !Reserved;
if (LargeIndex)
createSymtabShndx();
if (!ShndxIndexes.empty()) {
if (LargeIndex)
ShndxIndexes.push_back(shndx);
else
ShndxIndexes.push_back(0);
}
uint16_t Index = LargeIndex ? uint16_t(ELF::SHN_XINDEX) : shndx;
if (Is64Bit) {
write(name); // st_name
write(info); // st_info
write(other); // st_other
write(Index); // st_shndx
write(value); // st_value
write(size); // st_size
} else {
write(name); // st_name
write(uint32_t(value)); // st_value
write(uint32_t(size)); // st_size
write(info); // st_info
write(other); // st_other
write(Index); // st_shndx
}
++NumWritten;
}
ELFObjectWriter::~ELFObjectWriter()
{}
// Emit the ELF header.
void ELFObjectWriter::writeHeader(const MCAssembler &Asm) {
// ELF Header
// ----------
//
// Note
// ----
// emitWord method behaves differently for ELF32 and ELF64, writing
// 4 bytes in the former and 8 in the latter.
writeBytes(ELF::ElfMagic); // e_ident[EI_MAG0] to e_ident[EI_MAG3]
write8(is64Bit() ? ELF::ELFCLASS64 : ELF::ELFCLASS32); // e_ident[EI_CLASS]
// e_ident[EI_DATA]
write8(isLittleEndian() ? ELF::ELFDATA2LSB : ELF::ELFDATA2MSB);
write8(ELF::EV_CURRENT); // e_ident[EI_VERSION]
// e_ident[EI_OSABI]
write8(TargetObjectWriter->getOSABI());
write8(0); // e_ident[EI_ABIVERSION]
WriteZeros(ELF::EI_NIDENT - ELF::EI_PAD);
write16(ELF::ET_REL); // e_type
write16(TargetObjectWriter->getEMachine()); // e_machine = target
write32(ELF::EV_CURRENT); // e_version
WriteWord(0); // e_entry, no entry point in .o file
WriteWord(0); // e_phoff, no program header for .o
WriteWord(0); // e_shoff = sec hdr table off in bytes
// e_flags = whatever the target wants
write32(Asm.getELFHeaderEFlags());
// e_ehsize = ELF header size
write16(is64Bit() ? sizeof(ELF::Elf64_Ehdr) : sizeof(ELF::Elf32_Ehdr));
write16(0); // e_phentsize = prog header entry size
write16(0); // e_phnum = # prog header entries = 0
// e_shentsize = Section header entry size
write16(is64Bit() ? sizeof(ELF::Elf64_Shdr) : sizeof(ELF::Elf32_Shdr));
// e_shnum = # of section header ents
write16(0);
// e_shstrndx = Section # of '.shstrtab'
assert(StringTableIndex < ELF::SHN_LORESERVE);
write16(StringTableIndex);
}
uint64_t ELFObjectWriter::SymbolValue(const MCSymbol &Sym,
const MCAsmLayout &Layout) {
if (Sym.isCommon() && Sym.isExternal())
return Sym.getCommonAlignment();
uint64_t Res;
if (!Layout.getSymbolOffset(Sym, Res))
return 0;
if (Layout.getAssembler().isThumbFunc(&Sym))
Res |= 1;
return Res;
}
void ELFObjectWriter::executePostLayoutBinding(MCAssembler &Asm,
const MCAsmLayout &Layout) {
// Section symbols are used as definitions for undefined symbols with matching
// names. If there are multiple sections with the same name, the first one is
// used.
for (const MCSection &Sec : Asm) {
const MCSymbol *Begin = Sec.getBeginSymbol();
if (!Begin)
continue;
const MCSymbol *Alias = Asm.getContext().lookupSymbol(Begin->getName());
if (!Alias || !Alias->isUndefined())
continue;
Renames.insert(
std::make_pair(cast<MCSymbolELF>(Alias), cast<MCSymbolELF>(Begin)));
}
// The presence of symbol versions causes undefined symbols and
// versions declared with @@@ to be renamed.
for (const MCSymbol &A : Asm.symbols()) {
const auto &Alias = cast<MCSymbolELF>(A);
// Not an alias.
if (!Alias.isVariable())
continue;
auto *Ref = dyn_cast<MCSymbolRefExpr>(Alias.getVariableValue());
if (!Ref)
continue;
const auto &Symbol = cast<MCSymbolELF>(Ref->getSymbol());
StringRef AliasName = Alias.getName();
size_t Pos = AliasName.find('@');
if (Pos == StringRef::npos)
continue;
// Aliases defined with .symvar copy the binding from the symbol they alias.
// This is the first place we are able to copy this information.
Alias.setExternal(Symbol.isExternal());
Alias.setBinding(Symbol.getBinding());
StringRef Rest = AliasName.substr(Pos);
if (!Symbol.isUndefined() && !Rest.startswith("@@@"))
continue;
// FIXME: produce a better error message.
if (Symbol.isUndefined() && Rest.startswith("@@") &&
!Rest.startswith("@@@"))
report_fatal_error("A @@ version cannot be undefined");
Renames.insert(std::make_pair(&Symbol, &Alias));
}
}
static uint8_t mergeTypeForSet(uint8_t origType, uint8_t newType) {
uint8_t Type = newType;
// Propagation rules:
// IFUNC > FUNC > OBJECT > NOTYPE
// TLS_OBJECT > OBJECT > NOTYPE
//
// dont let the new type degrade the old type
switch (origType) {
default:
break;
case ELF::STT_GNU_IFUNC:
if (Type == ELF::STT_FUNC || Type == ELF::STT_OBJECT ||
Type == ELF::STT_NOTYPE || Type == ELF::STT_TLS)
Type = ELF::STT_GNU_IFUNC;
break;
case ELF::STT_FUNC:
if (Type == ELF::STT_OBJECT || Type == ELF::STT_NOTYPE ||
Type == ELF::STT_TLS)
Type = ELF::STT_FUNC;
break;
case ELF::STT_OBJECT:
if (Type == ELF::STT_NOTYPE)
Type = ELF::STT_OBJECT;
break;
case ELF::STT_TLS:
if (Type == ELF::STT_OBJECT || Type == ELF::STT_NOTYPE ||
Type == ELF::STT_GNU_IFUNC || Type == ELF::STT_FUNC)
Type = ELF::STT_TLS;
break;
}
return Type;
}
void ELFObjectWriter::writeSymbol(SymbolTableWriter &Writer,
uint32_t StringIndex, ELFSymbolData &MSD,
const MCAsmLayout &Layout) {
const auto &Symbol = cast<MCSymbolELF>(*MSD.Symbol);
const MCSymbolELF *Base =
cast_or_null<MCSymbolELF>(Layout.getBaseSymbol(Symbol));
// This has to be in sync with when computeSymbolTable uses SHN_ABS or
// SHN_COMMON.
bool IsReserved = !Base || Symbol.isCommon();
// Binding and Type share the same byte as upper and lower nibbles
uint8_t Binding = Symbol.getBinding();
uint8_t Type = Symbol.getType();
if (Base) {
Type = mergeTypeForSet(Type, Base->getType());
}
uint8_t Info = (Binding << 4) | Type;
// Other and Visibility share the same byte with Visibility using the lower
// 2 bits
uint8_t Visibility = Symbol.getVisibility();
uint8_t Other = Symbol.getOther() | Visibility;
uint64_t Value = SymbolValue(*MSD.Symbol, Layout);
uint64_t Size = 0;
const MCExpr *ESize = MSD.Symbol->getSize();
if (!ESize && Base)
ESize = Base->getSize();
if (ESize) {
int64_t Res;
if (!ESize->evaluateKnownAbsolute(Res, Layout))
report_fatal_error("Size expression must be absolute.");
Size = Res;
}
// Write out the symbol table entry
Writer.writeSymbol(StringIndex, Info, Value, Size, Other, MSD.SectionIndex,
IsReserved);
}
// It is always valid to create a relocation with a symbol. It is preferable
// to use a relocation with a section if that is possible. Using the section
// allows us to omit some local symbols from the symbol table.
bool ELFObjectWriter::shouldRelocateWithSymbol(const MCAssembler &Asm,
const MCSymbolRefExpr *RefA,
const MCSymbol *S, uint64_t C,
unsigned Type) const {
const auto *Sym = cast_or_null<MCSymbolELF>(S);
// A PCRel relocation to an absolute value has no symbol (or section). We
// represent that with a relocation to a null section.
if (!RefA)
return false;
MCSymbolRefExpr::VariantKind Kind = RefA->getKind();
switch (Kind) {
default:
break;
// The .odp creation emits a relocation against the symbol ".TOC." which
// create a R_PPC64_TOC relocation. However the relocation symbol name
// in final object creation should be NULL, since the symbol does not
// really exist, it is just the reference to TOC base for the current
// object file. Since the symbol is undefined, returning false results
// in a relocation with a null section which is the desired result.
case MCSymbolRefExpr::VK_PPC_TOCBASE:
return false;
// These VariantKind cause the relocation to refer to something other than
// the symbol itself, like a linker generated table. Since the address of
// symbol is not relevant, we cannot replace the symbol with the
// section and patch the difference in the addend.
case MCSymbolRefExpr::VK_GOT:
case MCSymbolRefExpr::VK_PLT:
case MCSymbolRefExpr::VK_GOTPCREL:
case MCSymbolRefExpr::VK_PPC_GOT_LO:
case MCSymbolRefExpr::VK_PPC_GOT_HI:
case MCSymbolRefExpr::VK_PPC_GOT_HA:
return true;
}
// An undefined symbol is not in any section, so the relocation has to point
// to the symbol itself.
assert(Sym && "Expected a symbol");
if (Sym->isUndefined())
return true;
unsigned Binding = Sym->getBinding();
switch(Binding) {
default:
llvm_unreachable("Invalid Binding");
case ELF::STB_LOCAL:
break;
case ELF::STB_WEAK:
// If the symbol is weak, it might be overridden by a symbol in another
// file. The relocation has to point to the symbol so that the linker
// can update it.
return true;
case ELF::STB_GLOBAL:
// Global ELF symbols can be preempted by the dynamic linker. The relocation
// has to point to the symbol for a reason analogous to the STB_WEAK case.
return true;
}
// If a relocation points to a mergeable section, we have to be careful.
// If the offset is zero, a relocation with the section will encode the
// same information. With a non-zero offset, the situation is different.
// For example, a relocation can point 42 bytes past the end of a string.
// If we change such a relocation to use the section, the linker would think
// that it pointed to another string and subtracting 42 at runtime will
// produce the wrong value.
auto &Sec = cast<MCSectionELF>(Sym->getSection());
unsigned Flags = Sec.getFlags();
if (Flags & ELF::SHF_MERGE) {
if (C != 0)
return true;
// It looks like gold has a bug (http://sourceware.org/PR16794) and can
// only handle section relocations to mergeable sections if using RELA.
if (!hasRelocationAddend())
return true;
}
// Most TLS relocations use a got, so they need the symbol. Even those that
// are just an offset (@tpoff), require a symbol in gold versions before
// 5efeedf61e4fe720fd3e9a08e6c91c10abb66d42 (2014-09-26) which fixed
// http://sourceware.org/PR16773.
if (Flags & ELF::SHF_TLS)
return true;
// If the symbol is a thumb function the final relocation must set the lowest
// bit. With a symbol that is done by just having the symbol have that bit
// set, so we would lose the bit if we relocated with the section.
// FIXME: We could use the section but add the bit to the relocation value.
if (Asm.isThumbFunc(Sym))
return true;
if (TargetObjectWriter->needsRelocateWithSymbol(*Sym, Type))
return true;
return false;
}
// True if the assembler knows nothing about the final value of the symbol.
// This doesn't cover the comdat issues, since in those cases the assembler
// can at least know that all symbols in the section will move together.
static bool isWeak(const MCSymbolELF &Sym) {
if (Sym.getType() == ELF::STT_GNU_IFUNC)
return true;
switch (Sym.getBinding()) {
default:
llvm_unreachable("Unknown binding");
case ELF::STB_LOCAL:
return false;
case ELF::STB_GLOBAL:
return false;
case ELF::STB_WEAK:
case ELF::STB_GNU_UNIQUE:
return true;
}
}
void ELFObjectWriter::recordRelocation(MCAssembler &Asm,
const MCAsmLayout &Layout,
const MCFragment *Fragment,
const MCFixup &Fixup, MCValue Target,
bool &IsPCRel, uint64_t &FixedValue) {
const MCSectionELF &FixupSection = cast<MCSectionELF>(*Fragment->getParent());
uint64_t C = Target.getConstant();
uint64_t FixupOffset = Layout.getFragmentOffset(Fragment) + Fixup.getOffset();
2016-01-14 06:23:36 +08:00
MCContext &Ctx = Asm.getContext();
if (const MCSymbolRefExpr *RefB = Target.getSymB()) {
assert(RefB->getKind() == MCSymbolRefExpr::VK_None &&
"Should not have constructed this");
// Let A, B and C being the components of Target and R be the location of
// the fixup. If the fixup is not pcrel, we want to compute (A - B + C).
// If it is pcrel, we want to compute (A - B + C - R).
// In general, ELF has no relocations for -B. It can only represent (A + C)
// or (A + C - R). If B = R + K and the relocation is not pcrel, we can
// replace B to implement it: (A - R - K + C)
if (IsPCRel) {
2016-01-14 06:23:36 +08:00
Ctx.reportError(
Fixup.getLoc(),
"No relocation available to represent this relative expression");
return;
}
const auto &SymB = cast<MCSymbolELF>(RefB->getSymbol());
if (SymB.isUndefined()) {
2016-01-14 06:23:36 +08:00
Ctx.reportError(Fixup.getLoc(),
Twine("symbol '") + SymB.getName() +
"' can not be undefined in a subtraction expression");
return;
}
assert(!SymB.isAbsolute() && "Should have been folded");
const MCSection &SecB = SymB.getSection();
if (&SecB != &FixupSection) {
2016-01-14 06:23:36 +08:00
Ctx.reportError(Fixup.getLoc(),
"Cannot represent a difference across sections");
return;
}
uint64_t SymBOffset = Layout.getSymbolOffset(SymB);
uint64_t K = SymBOffset - FixupOffset;
IsPCRel = true;
C -= K;
}
// We either rejected the fixup or folded B into C at this point.
const MCSymbolRefExpr *RefA = Target.getSymA();
const auto *SymA = RefA ? cast<MCSymbolELF>(&RefA->getSymbol()) : nullptr;
bool ViaWeakRef = false;
if (SymA && SymA->isVariable()) {
const MCExpr *Expr = SymA->getVariableValue();
if (const auto *Inner = dyn_cast<MCSymbolRefExpr>(Expr)) {
if (Inner->getKind() == MCSymbolRefExpr::VK_WEAKREF) {
SymA = cast<MCSymbolELF>(&Inner->getSymbol());
ViaWeakRef = true;
}
}
}
unsigned Type = getRelocType(Ctx, Target, Fixup, IsPCRel);
[mips] Correct the ordering of HI/LO pairs in the relocation table. Summary: There seems to have been a misunderstanding as to the meaning of 'offset' in the rules laid down by our ABI. The previous code believed that 'offset' meant the offset within the section that the relocation is applied to. However, it should have meant the offset from the symbol used in the relocation expression. This patch adds two fields to ELFRelocationEntry and uses them to correct the order of relocations for MIPS. These fields contain: * The original symbol before shouldRelocateWithSymbol() is considered. This ensures that R_MIPS_GOT16 is able to correctly distinguish between local and external symbols, allowing us to tell whether %got() requires a matching %lo() or not (local symbols require one, external symbols don't). It also prevents confusing cases where the fuzzy matching rules cause things like %hi(foo)/%lo(foo+3) and %hi(bar)/%lo(bar+1) to swap their %lo()'s. * The original offset before shouldRelocateWithSymbol() is considered. The existing Addend field is always zero when the object uses in place addends (because it's already moved it to the encoding) but MIPS needs to use the original offset to ensure that the linker correctly calculates the carry-in bit for %hi() and %got(). IAS ensures that unmatchable %hi()/%got() relocations are placed at the end of the table to ensure that the linker rejects the table (we're unable to report such errors directly). The alternatives to this risk accidental matching against inappropriate relocations which may silently compute incorrect values due to an incorrect carry bit between the %lo() and %hi()/%got(). Reviewers: sdardis Subscribers: dsanders, sdardis, rafael, llvm-commits Differential Revision: http://reviews.llvm.org/D19718 llvm-svn: 268733
2016-05-06 21:49:25 +08:00
uint64_t OriginalC = C;
bool RelocateWithSymbol = shouldRelocateWithSymbol(Asm, RefA, SymA, C, Type);
if (!RelocateWithSymbol && SymA && !SymA->isUndefined())
C += Layout.getSymbolOffset(*SymA);
uint64_t Addend = 0;
if (hasRelocationAddend()) {
Addend = C;
C = 0;
}
FixedValue = C;
if (!RelocateWithSymbol) {
const MCSection *SecA =
(SymA && !SymA->isUndefined()) ? &SymA->getSection() : nullptr;
auto *ELFSec = cast_or_null<MCSectionELF>(SecA);
const auto *SectionSymbol =
ELFSec ? cast<MCSymbolELF>(ELFSec->getBeginSymbol()) : nullptr;
if (SectionSymbol)
SectionSymbol->setUsedInReloc();
[mips] Correct the ordering of HI/LO pairs in the relocation table. Summary: There seems to have been a misunderstanding as to the meaning of 'offset' in the rules laid down by our ABI. The previous code believed that 'offset' meant the offset within the section that the relocation is applied to. However, it should have meant the offset from the symbol used in the relocation expression. This patch adds two fields to ELFRelocationEntry and uses them to correct the order of relocations for MIPS. These fields contain: * The original symbol before shouldRelocateWithSymbol() is considered. This ensures that R_MIPS_GOT16 is able to correctly distinguish between local and external symbols, allowing us to tell whether %got() requires a matching %lo() or not (local symbols require one, external symbols don't). It also prevents confusing cases where the fuzzy matching rules cause things like %hi(foo)/%lo(foo+3) and %hi(bar)/%lo(bar+1) to swap their %lo()'s. * The original offset before shouldRelocateWithSymbol() is considered. The existing Addend field is always zero when the object uses in place addends (because it's already moved it to the encoding) but MIPS needs to use the original offset to ensure that the linker correctly calculates the carry-in bit for %hi() and %got(). IAS ensures that unmatchable %hi()/%got() relocations are placed at the end of the table to ensure that the linker rejects the table (we're unable to report such errors directly). The alternatives to this risk accidental matching against inappropriate relocations which may silently compute incorrect values due to an incorrect carry bit between the %lo() and %hi()/%got(). Reviewers: sdardis Subscribers: dsanders, sdardis, rafael, llvm-commits Differential Revision: http://reviews.llvm.org/D19718 llvm-svn: 268733
2016-05-06 21:49:25 +08:00
ELFRelocationEntry Rec(FixupOffset, SectionSymbol, Type, Addend, SymA,
OriginalC);
Relocations[&FixupSection].push_back(Rec);
return;
}
[mips] Correct the ordering of HI/LO pairs in the relocation table. Summary: There seems to have been a misunderstanding as to the meaning of 'offset' in the rules laid down by our ABI. The previous code believed that 'offset' meant the offset within the section that the relocation is applied to. However, it should have meant the offset from the symbol used in the relocation expression. This patch adds two fields to ELFRelocationEntry and uses them to correct the order of relocations for MIPS. These fields contain: * The original symbol before shouldRelocateWithSymbol() is considered. This ensures that R_MIPS_GOT16 is able to correctly distinguish between local and external symbols, allowing us to tell whether %got() requires a matching %lo() or not (local symbols require one, external symbols don't). It also prevents confusing cases where the fuzzy matching rules cause things like %hi(foo)/%lo(foo+3) and %hi(bar)/%lo(bar+1) to swap their %lo()'s. * The original offset before shouldRelocateWithSymbol() is considered. The existing Addend field is always zero when the object uses in place addends (because it's already moved it to the encoding) but MIPS needs to use the original offset to ensure that the linker correctly calculates the carry-in bit for %hi() and %got(). IAS ensures that unmatchable %hi()/%got() relocations are placed at the end of the table to ensure that the linker rejects the table (we're unable to report such errors directly). The alternatives to this risk accidental matching against inappropriate relocations which may silently compute incorrect values due to an incorrect carry bit between the %lo() and %hi()/%got(). Reviewers: sdardis Subscribers: dsanders, sdardis, rafael, llvm-commits Differential Revision: http://reviews.llvm.org/D19718 llvm-svn: 268733
2016-05-06 21:49:25 +08:00
const auto *RenamedSymA = SymA;
if (SymA) {
if (const MCSymbolELF *R = Renames.lookup(SymA))
[mips] Correct the ordering of HI/LO pairs in the relocation table. Summary: There seems to have been a misunderstanding as to the meaning of 'offset' in the rules laid down by our ABI. The previous code believed that 'offset' meant the offset within the section that the relocation is applied to. However, it should have meant the offset from the symbol used in the relocation expression. This patch adds two fields to ELFRelocationEntry and uses them to correct the order of relocations for MIPS. These fields contain: * The original symbol before shouldRelocateWithSymbol() is considered. This ensures that R_MIPS_GOT16 is able to correctly distinguish between local and external symbols, allowing us to tell whether %got() requires a matching %lo() or not (local symbols require one, external symbols don't). It also prevents confusing cases where the fuzzy matching rules cause things like %hi(foo)/%lo(foo+3) and %hi(bar)/%lo(bar+1) to swap their %lo()'s. * The original offset before shouldRelocateWithSymbol() is considered. The existing Addend field is always zero when the object uses in place addends (because it's already moved it to the encoding) but MIPS needs to use the original offset to ensure that the linker correctly calculates the carry-in bit for %hi() and %got(). IAS ensures that unmatchable %hi()/%got() relocations are placed at the end of the table to ensure that the linker rejects the table (we're unable to report such errors directly). The alternatives to this risk accidental matching against inappropriate relocations which may silently compute incorrect values due to an incorrect carry bit between the %lo() and %hi()/%got(). Reviewers: sdardis Subscribers: dsanders, sdardis, rafael, llvm-commits Differential Revision: http://reviews.llvm.org/D19718 llvm-svn: 268733
2016-05-06 21:49:25 +08:00
RenamedSymA = R;
if (ViaWeakRef)
[mips] Correct the ordering of HI/LO pairs in the relocation table. Summary: There seems to have been a misunderstanding as to the meaning of 'offset' in the rules laid down by our ABI. The previous code believed that 'offset' meant the offset within the section that the relocation is applied to. However, it should have meant the offset from the symbol used in the relocation expression. This patch adds two fields to ELFRelocationEntry and uses them to correct the order of relocations for MIPS. These fields contain: * The original symbol before shouldRelocateWithSymbol() is considered. This ensures that R_MIPS_GOT16 is able to correctly distinguish between local and external symbols, allowing us to tell whether %got() requires a matching %lo() or not (local symbols require one, external symbols don't). It also prevents confusing cases where the fuzzy matching rules cause things like %hi(foo)/%lo(foo+3) and %hi(bar)/%lo(bar+1) to swap their %lo()'s. * The original offset before shouldRelocateWithSymbol() is considered. The existing Addend field is always zero when the object uses in place addends (because it's already moved it to the encoding) but MIPS needs to use the original offset to ensure that the linker correctly calculates the carry-in bit for %hi() and %got(). IAS ensures that unmatchable %hi()/%got() relocations are placed at the end of the table to ensure that the linker rejects the table (we're unable to report such errors directly). The alternatives to this risk accidental matching against inappropriate relocations which may silently compute incorrect values due to an incorrect carry bit between the %lo() and %hi()/%got(). Reviewers: sdardis Subscribers: dsanders, sdardis, rafael, llvm-commits Differential Revision: http://reviews.llvm.org/D19718 llvm-svn: 268733
2016-05-06 21:49:25 +08:00
RenamedSymA->setIsWeakrefUsedInReloc();
else
[mips] Correct the ordering of HI/LO pairs in the relocation table. Summary: There seems to have been a misunderstanding as to the meaning of 'offset' in the rules laid down by our ABI. The previous code believed that 'offset' meant the offset within the section that the relocation is applied to. However, it should have meant the offset from the symbol used in the relocation expression. This patch adds two fields to ELFRelocationEntry and uses them to correct the order of relocations for MIPS. These fields contain: * The original symbol before shouldRelocateWithSymbol() is considered. This ensures that R_MIPS_GOT16 is able to correctly distinguish between local and external symbols, allowing us to tell whether %got() requires a matching %lo() or not (local symbols require one, external symbols don't). It also prevents confusing cases where the fuzzy matching rules cause things like %hi(foo)/%lo(foo+3) and %hi(bar)/%lo(bar+1) to swap their %lo()'s. * The original offset before shouldRelocateWithSymbol() is considered. The existing Addend field is always zero when the object uses in place addends (because it's already moved it to the encoding) but MIPS needs to use the original offset to ensure that the linker correctly calculates the carry-in bit for %hi() and %got(). IAS ensures that unmatchable %hi()/%got() relocations are placed at the end of the table to ensure that the linker rejects the table (we're unable to report such errors directly). The alternatives to this risk accidental matching against inappropriate relocations which may silently compute incorrect values due to an incorrect carry bit between the %lo() and %hi()/%got(). Reviewers: sdardis Subscribers: dsanders, sdardis, rafael, llvm-commits Differential Revision: http://reviews.llvm.org/D19718 llvm-svn: 268733
2016-05-06 21:49:25 +08:00
RenamedSymA->setUsedInReloc();
}
[mips] Correct the ordering of HI/LO pairs in the relocation table. Summary: There seems to have been a misunderstanding as to the meaning of 'offset' in the rules laid down by our ABI. The previous code believed that 'offset' meant the offset within the section that the relocation is applied to. However, it should have meant the offset from the symbol used in the relocation expression. This patch adds two fields to ELFRelocationEntry and uses them to correct the order of relocations for MIPS. These fields contain: * The original symbol before shouldRelocateWithSymbol() is considered. This ensures that R_MIPS_GOT16 is able to correctly distinguish between local and external symbols, allowing us to tell whether %got() requires a matching %lo() or not (local symbols require one, external symbols don't). It also prevents confusing cases where the fuzzy matching rules cause things like %hi(foo)/%lo(foo+3) and %hi(bar)/%lo(bar+1) to swap their %lo()'s. * The original offset before shouldRelocateWithSymbol() is considered. The existing Addend field is always zero when the object uses in place addends (because it's already moved it to the encoding) but MIPS needs to use the original offset to ensure that the linker correctly calculates the carry-in bit for %hi() and %got(). IAS ensures that unmatchable %hi()/%got() relocations are placed at the end of the table to ensure that the linker rejects the table (we're unable to report such errors directly). The alternatives to this risk accidental matching against inappropriate relocations which may silently compute incorrect values due to an incorrect carry bit between the %lo() and %hi()/%got(). Reviewers: sdardis Subscribers: dsanders, sdardis, rafael, llvm-commits Differential Revision: http://reviews.llvm.org/D19718 llvm-svn: 268733
2016-05-06 21:49:25 +08:00
ELFRelocationEntry Rec(FixupOffset, RenamedSymA, Type, Addend, SymA,
OriginalC);
Relocations[&FixupSection].push_back(Rec);
}
bool ELFObjectWriter::isInSymtab(const MCAsmLayout &Layout,
const MCSymbolELF &Symbol, bool Used,
bool Renamed) {
if (Symbol.isVariable()) {
const MCExpr *Expr = Symbol.getVariableValue();
if (const MCSymbolRefExpr *Ref = dyn_cast<MCSymbolRefExpr>(Expr)) {
if (Ref->getKind() == MCSymbolRefExpr::VK_WEAKREF)
return false;
}
}
2010-11-01 22:28:48 +08:00
if (Used)
return true;
if (Renamed)
return false;
if (Symbol.isVariable() && Symbol.isUndefined()) {
// FIXME: this is here just to diagnose the case of a var = commmon_sym.
Layout.getBaseSymbol(Symbol);
return false;
}
if (Symbol.isUndefined() && !Symbol.isBindingSet())
return false;
if (Symbol.isTemporary())
return false;
if (Symbol.getType() == ELF::STT_SECTION)
return false;
return true;
}
void ELFObjectWriter::computeSymbolTable(
MCAssembler &Asm, const MCAsmLayout &Layout,
const SectionIndexMapTy &SectionIndexMap, const RevGroupMapTy &RevGroupMap,
SectionOffsetsTy &SectionOffsets) {
MCContext &Ctx = Asm.getContext();
SymbolTableWriter Writer(*this, is64Bit());
// Symbol table
unsigned EntrySize = is64Bit() ? ELF::SYMENTRY_SIZE64 : ELF::SYMENTRY_SIZE32;
MCSectionELF *SymtabSection =
Ctx.getELFSection(".symtab", ELF::SHT_SYMTAB, 0, EntrySize, "");
SymtabSection->setAlignment(is64Bit() ? 8 : 4);
SymbolTableIndex = addToSectionTable(SymtabSection);
align(SymtabSection->getAlignment());
uint64_t SecStart = getStream().tell();
// The first entry is the undefined symbol entry.
Writer.writeSymbol(0, 0, 0, 0, 0, 0, false);
std::vector<ELFSymbolData> LocalSymbolData;
std::vector<ELFSymbolData> ExternalSymbolData;
// Add the data for the symbols.
bool HasLargeSectionIndex = false;
for (const MCSymbol &S : Asm.symbols()) {
const auto &Symbol = cast<MCSymbolELF>(S);
bool Used = Symbol.isUsedInReloc();
bool WeakrefUsed = Symbol.isWeakrefUsedInReloc();
bool isSignature = Symbol.isSignature();
if (!isInSymtab(Layout, Symbol, Used || WeakrefUsed || isSignature,
Renames.count(&Symbol)))
continue;
if (Symbol.isTemporary() && Symbol.isUndefined()) {
Ctx.reportError(SMLoc(), "Undefined temporary symbol");
continue;
}
ELFSymbolData MSD;
MSD.Symbol = cast<MCSymbolELF>(&Symbol);
bool Local = Symbol.getBinding() == ELF::STB_LOCAL;
assert(Local || !Symbol.isTemporary());
if (Symbol.isAbsolute()) {
MSD.SectionIndex = ELF::SHN_ABS;
} else if (Symbol.isCommon()) {
assert(!Local);
MSD.SectionIndex = ELF::SHN_COMMON;
} else if (Symbol.isUndefined()) {
if (isSignature && !Used) {
MSD.SectionIndex = RevGroupMap.lookup(&Symbol);
if (MSD.SectionIndex >= ELF::SHN_LORESERVE)
HasLargeSectionIndex = true;
} else {
MSD.SectionIndex = ELF::SHN_UNDEF;
}
} else {
const MCSectionELF &Section =
static_cast<const MCSectionELF &>(Symbol.getSection());
MSD.SectionIndex = SectionIndexMap.lookup(&Section);
assert(MSD.SectionIndex && "Invalid section index!");
if (MSD.SectionIndex >= ELF::SHN_LORESERVE)
HasLargeSectionIndex = true;
}
// The @@@ in symbol version is replaced with @ in undefined symbols and @@
// in defined ones.
//
// FIXME: All name handling should be done before we get to the writer,
// including dealing with GNU-style version suffixes. Fixing this isn't
// trivial.
//
// We thus have to be careful to not perform the symbol version replacement
// blindly:
//
// The ELF format is used on Windows by the MCJIT engine. Thus, on
// Windows, the ELFObjectWriter can encounter symbols mangled using the MS
// Visual Studio C++ name mangling scheme. Symbols mangled using the MSVC
// C++ name mangling can legally have "@@@" as a sub-string. In that case,
// the EFLObjectWriter should not interpret the "@@@" sub-string as
// specifying GNU-style symbol versioning. The ELFObjectWriter therefore
// checks for the MSVC C++ name mangling prefix which is either "?", "@?",
// "__imp_?" or "__imp_@?".
//
// It would have been interesting to perform the MS mangling prefix check
// only when the target triple is of the form *-pc-windows-elf. But, it
// seems that this information is not easily accessible from the
// ELFObjectWriter.
StringRef Name = Symbol.getName();
SmallString<32> Buf;
if (!Name.startswith("?") && !Name.startswith("@?") &&
!Name.startswith("__imp_?") && !Name.startswith("__imp_@?")) {
// This symbol isn't following the MSVC C++ name mangling convention. We
// can thus safely interpret the @@@ in symbol names as specifying symbol
// versioning.
size_t Pos = Name.find("@@@");
if (Pos != StringRef::npos) {
Buf += Name.substr(0, Pos);
unsigned Skip = MSD.SectionIndex == ELF::SHN_UNDEF ? 2 : 1;
Buf += Name.substr(Pos + Skip);
Name = VersionSymSaver.save(Buf.c_str());
}
}
// Sections have their own string table
if (Symbol.getType() != ELF::STT_SECTION) {
MSD.Name = Name;
StrTabBuilder.add(Name);
}
if (Local)
LocalSymbolData.push_back(MSD);
else
ExternalSymbolData.push_back(MSD);
}
// This holds the .symtab_shndx section index.
unsigned SymtabShndxSectionIndex = 0;
if (HasLargeSectionIndex) {
MCSectionELF *SymtabShndxSection =
Ctx.getELFSection(".symtab_shndxr", ELF::SHT_SYMTAB_SHNDX, 0, 4, "");
SymtabShndxSectionIndex = addToSectionTable(SymtabShndxSection);
SymtabShndxSection->setAlignment(4);
}
ArrayRef<std::string> FileNames = Asm.getFileNames();
for (const std::string &Name : FileNames)
StrTabBuilder.add(Name);
StrTabBuilder.finalize();
for (const std::string &Name : FileNames)
Writer.writeSymbol(StrTabBuilder.getOffset(Name),
ELF::STT_FILE | ELF::STB_LOCAL, 0, 0, ELF::STV_DEFAULT,
ELF::SHN_ABS, true);
// Symbols are required to be in lexicographic order.
array_pod_sort(LocalSymbolData.begin(), LocalSymbolData.end());
array_pod_sort(ExternalSymbolData.begin(), ExternalSymbolData.end());
// Set the symbol indices. Local symbols must come before all other
// symbols with non-local bindings.
unsigned Index = FileNames.size() + 1;
for (ELFSymbolData &MSD : LocalSymbolData) {
unsigned StringIndex = MSD.Symbol->getType() == ELF::STT_SECTION
? 0
: StrTabBuilder.getOffset(MSD.Name);
MSD.Symbol->setIndex(Index++);
writeSymbol(Writer, StringIndex, MSD, Layout);
}
// Write the symbol table entries.
LastLocalSymbolIndex = Index;
2015-05-29 03:43:20 +08:00
for (ELFSymbolData &MSD : ExternalSymbolData) {
unsigned StringIndex = StrTabBuilder.getOffset(MSD.Name);
MSD.Symbol->setIndex(Index++);
writeSymbol(Writer, StringIndex, MSD, Layout);
assert(MSD.Symbol->getBinding() != ELF::STB_LOCAL);
}
uint64_t SecEnd = getStream().tell();
SectionOffsets[SymtabSection] = std::make_pair(SecStart, SecEnd);
ArrayRef<uint32_t> ShndxIndexes = Writer.getShndxIndexes();
if (ShndxIndexes.empty()) {
assert(SymtabShndxSectionIndex == 0);
return;
}
assert(SymtabShndxSectionIndex != 0);
SecStart = getStream().tell();
const MCSectionELF *SymtabShndxSection =
SectionTable[SymtabShndxSectionIndex - 1];
for (uint32_t Index : ShndxIndexes)
write(Index);
SecEnd = getStream().tell();
SectionOffsets[SymtabShndxSection] = std::make_pair(SecStart, SecEnd);
}
MCSectionELF *
ELFObjectWriter::createRelocationSection(MCContext &Ctx,
const MCSectionELF &Sec) {
if (Relocations[&Sec].empty())
return nullptr;
const StringRef SectionName = Sec.getSectionName();
std::string RelaSectionName = hasRelocationAddend() ? ".rela" : ".rel";
RelaSectionName += SectionName;
unsigned EntrySize;
if (hasRelocationAddend())
EntrySize = is64Bit() ? sizeof(ELF::Elf64_Rela) : sizeof(ELF::Elf32_Rela);
else
EntrySize = is64Bit() ? sizeof(ELF::Elf64_Rel) : sizeof(ELF::Elf32_Rel);
unsigned Flags = 0;
if (Sec.getFlags() & ELF::SHF_GROUP)
Flags = ELF::SHF_GROUP;
MCSectionELF *RelaSection = Ctx.createELFRelSection(
RelaSectionName, hasRelocationAddend() ? ELF::SHT_RELA : ELF::SHT_REL,
Flags, EntrySize, Sec.getGroup(), &Sec);
RelaSection->setAlignment(is64Bit() ? 8 : 4);
return RelaSection;
}
// Include the debug info compression header.
bool ELFObjectWriter::maybeWriteCompression(
uint64_t Size, SmallVectorImpl<char> &CompressedContents, bool ZLibStyle,
unsigned Alignment) {
if (ZLibStyle) {
uint64_t HdrSize =
is64Bit() ? sizeof(ELF::Elf32_Chdr) : sizeof(ELF::Elf64_Chdr);
if (Size <= HdrSize + CompressedContents.size())
return false;
// Platform specific header is followed by compressed data.
if (is64Bit()) {
// Write Elf64_Chdr header.
write(static_cast<ELF::Elf64_Word>(ELF::ELFCOMPRESS_ZLIB));
write(static_cast<ELF::Elf64_Word>(0)); // ch_reserved field.
write(static_cast<ELF::Elf64_Xword>(Size));
write(static_cast<ELF::Elf64_Xword>(Alignment));
} else {
// Write Elf32_Chdr header otherwise.
write(static_cast<ELF::Elf32_Word>(ELF::ELFCOMPRESS_ZLIB));
write(static_cast<ELF::Elf32_Word>(Size));
write(static_cast<ELF::Elf32_Word>(Alignment));
}
return true;
}
// "ZLIB" followed by 8 bytes representing the uncompressed size of the section,
// useful for consumers to preallocate a buffer to decompress into.
const StringRef Magic = "ZLIB";
if (Size <= Magic.size() + sizeof(Size) + CompressedContents.size())
return false;
write(ArrayRef<char>(Magic.begin(), Magic.size()));
writeBE64(Size);
return true;
}
void ELFObjectWriter::writeSectionData(const MCAssembler &Asm, MCSection &Sec,
const MCAsmLayout &Layout) {
MCSectionELF &Section = static_cast<MCSectionELF &>(Sec);
StringRef SectionName = Section.getSectionName();
Reimplement debug info compression by compressing the whole section, rather than a fragment. To support compressing the debug_line section that contains multiple fragments (due, I believe, to variation in choices of line table encoding depending on the size of instruction ranges in the actual program code) we needed to support compressing multiple MCFragments in a single pass. This patch implements that behavior by mutating the post-relaxed and relocated section to be the compressed form of its former self, including renaming the section. This is a more flexible (and less invasive, to a degree) implementation that will allow for other features such as "use compression only if it's smaller than the uncompressed data". Compressing debug_frame would be a possible further extension to this work, but I've left it for now. The hurdle there is alignment sections - which might require going as far as to refactor MCAssembler.cpp:writeFragment to handle writing to a byte buffer or an MCObjectWriter (there's already a virtual call there, so it shouldn't add substantial compile-time cost) which could in turn involve refactoring MCAsmBackend::writeNopData to use that same abstraction... which involves touching all the backends. This would remove the limited handling of fragment writing seen in ELFObjectWriter.cpp:getUncompressedData which would be nice - but it's more invasive. I did discover that I (perhaps obviously) don't need to handle relocations when I rewrite the fragments - since the relocations have already been applied and computed (and stored into ELFObjectWriter::Relocations) by this stage (necessarily, because we need to have written any immediate values or assembly-time relocations into the data already before we compress it, which we have). The test case doesn't necessarily cover that in detail - I can add more test coverage if that's preferred. llvm-svn: 205990
2014-04-11 05:53:53 +08:00
// Compressing debug_frame requires handling alignment fragments which is
// more work (possibly generalizing MCAssembler.cpp:writeFragment to allow
// for writing to arbitrary buffers) for little benefit.
bool CompressionEnabled =
Asm.getContext().getAsmInfo()->compressDebugSections() !=
DebugCompressionType::DCT_None;
if (!CompressionEnabled || !SectionName.startswith(".debug_") ||
SectionName == ".debug_frame") {
Asm.writeSectionData(&Section, Layout);
return;
}
SmallVector<char, 128> UncompressedData;
raw_svector_ostream VecOS(UncompressedData);
raw_pwrite_stream &OldStream = getStream();
setStream(VecOS);
Asm.writeSectionData(&Section, Layout);
setStream(OldStream);
Reimplement debug info compression by compressing the whole section, rather than a fragment. To support compressing the debug_line section that contains multiple fragments (due, I believe, to variation in choices of line table encoding depending on the size of instruction ranges in the actual program code) we needed to support compressing multiple MCFragments in a single pass. This patch implements that behavior by mutating the post-relaxed and relocated section to be the compressed form of its former self, including renaming the section. This is a more flexible (and less invasive, to a degree) implementation that will allow for other features such as "use compression only if it's smaller than the uncompressed data". Compressing debug_frame would be a possible further extension to this work, but I've left it for now. The hurdle there is alignment sections - which might require going as far as to refactor MCAssembler.cpp:writeFragment to handle writing to a byte buffer or an MCObjectWriter (there's already a virtual call there, so it shouldn't add substantial compile-time cost) which could in turn involve refactoring MCAsmBackend::writeNopData to use that same abstraction... which involves touching all the backends. This would remove the limited handling of fragment writing seen in ELFObjectWriter.cpp:getUncompressedData which would be nice - but it's more invasive. I did discover that I (perhaps obviously) don't need to handle relocations when I rewrite the fragments - since the relocations have already been applied and computed (and stored into ELFObjectWriter::Relocations) by this stage (necessarily, because we need to have written any immediate values or assembly-time relocations into the data already before we compress it, which we have). The test case doesn't necessarily cover that in detail - I can add more test coverage if that's preferred. llvm-svn: 205990
2014-04-11 05:53:53 +08:00
SmallVector<char, 128> CompressedContents;
Reimplement debug info compression by compressing the whole section, rather than a fragment. To support compressing the debug_line section that contains multiple fragments (due, I believe, to variation in choices of line table encoding depending on the size of instruction ranges in the actual program code) we needed to support compressing multiple MCFragments in a single pass. This patch implements that behavior by mutating the post-relaxed and relocated section to be the compressed form of its former self, including renaming the section. This is a more flexible (and less invasive, to a degree) implementation that will allow for other features such as "use compression only if it's smaller than the uncompressed data". Compressing debug_frame would be a possible further extension to this work, but I've left it for now. The hurdle there is alignment sections - which might require going as far as to refactor MCAssembler.cpp:writeFragment to handle writing to a byte buffer or an MCObjectWriter (there's already a virtual call there, so it shouldn't add substantial compile-time cost) which could in turn involve refactoring MCAsmBackend::writeNopData to use that same abstraction... which involves touching all the backends. This would remove the limited handling of fragment writing seen in ELFObjectWriter.cpp:getUncompressedData which would be nice - but it's more invasive. I did discover that I (perhaps obviously) don't need to handle relocations when I rewrite the fragments - since the relocations have already been applied and computed (and stored into ELFObjectWriter::Relocations) by this stage (necessarily, because we need to have written any immediate values or assembly-time relocations into the data already before we compress it, which we have). The test case doesn't necessarily cover that in detail - I can add more test coverage if that's preferred. llvm-svn: 205990
2014-04-11 05:53:53 +08:00
zlib::Status Success = zlib::compress(
StringRef(UncompressedData.data(), UncompressedData.size()),
CompressedContents);
if (Success != zlib::StatusOK) {
getStream() << UncompressedData;
return;
Update the fragments of symbols in compressed sections. While unnamed relocations are already cached in side tables in ELFObjectWriter::RecordRelocation, symbols still need their fragments updated to refer to the newly compressed fragment (even if that fragment isn't big enough to fit the offset). Even though we only create temporary symbols in debug info sections this comes up in 32 bit builds where even temporary symbols in mergeable sections (such as debug_str) have to be emitted as named symbols. I tried a few other ways to do this but they all didn't work for various reasons: 1) Canonicalize the MCSymbolData in RecordRelocation, nulling out the Fragment (so it didn't have to be updated by CompressDebugSection). This doesn't work because some code relies on symbols having fragments to indicate that they're defined, I think. 2) Canonicalize the MCSymbolData in RecordRelocation to be "first fragment + absolute offset" so it would be cheaper to just test and update the fragment in CompressDebugSections. This doesn't work because the offset computed in RecordRelocation isn't that of the symbol's fragment, it's the passed in fragment (I haven't figured out what that fragment is - perhaps it's the location where the relocation is to be written). And if the fragment offset has to be computed only for this use we might as well just do it when we need to, in CompressDebugSection. I also added an assert to help catch this a bit more clearly, even though it is UB. The test case improvements would either assert fail and/or valgrind vail without the fix, even if they wouldn't necessarily fail the FileCheck output. llvm-svn: 206653
2014-04-19 05:24:12 +08:00
}
bool ZlibStyle = Asm.getContext().getAsmInfo()->compressDebugSections() ==
DebugCompressionType::DCT_Zlib;
if (!maybeWriteCompression(UncompressedData.size(), CompressedContents,
ZlibStyle, Sec.getAlignment())) {
getStream() << UncompressedData;
Reimplement debug info compression by compressing the whole section, rather than a fragment. To support compressing the debug_line section that contains multiple fragments (due, I believe, to variation in choices of line table encoding depending on the size of instruction ranges in the actual program code) we needed to support compressing multiple MCFragments in a single pass. This patch implements that behavior by mutating the post-relaxed and relocated section to be the compressed form of its former self, including renaming the section. This is a more flexible (and less invasive, to a degree) implementation that will allow for other features such as "use compression only if it's smaller than the uncompressed data". Compressing debug_frame would be a possible further extension to this work, but I've left it for now. The hurdle there is alignment sections - which might require going as far as to refactor MCAssembler.cpp:writeFragment to handle writing to a byte buffer or an MCObjectWriter (there's already a virtual call there, so it shouldn't add substantial compile-time cost) which could in turn involve refactoring MCAsmBackend::writeNopData to use that same abstraction... which involves touching all the backends. This would remove the limited handling of fragment writing seen in ELFObjectWriter.cpp:getUncompressedData which would be nice - but it's more invasive. I did discover that I (perhaps obviously) don't need to handle relocations when I rewrite the fragments - since the relocations have already been applied and computed (and stored into ELFObjectWriter::Relocations) by this stage (necessarily, because we need to have written any immediate values or assembly-time relocations into the data already before we compress it, which we have). The test case doesn't necessarily cover that in detail - I can add more test coverage if that's preferred. llvm-svn: 205990
2014-04-11 05:53:53 +08:00
return;
}
if (ZlibStyle)
// Set the compressed flag. That is zlib style.
Section.setFlags(Section.getFlags() | ELF::SHF_COMPRESSED);
else
// Add "z" prefix to section name. This is zlib-gnu style.
Asm.getContext().renameELFSection(&Section,
(".z" + SectionName.drop_front(1)).str());
getStream() << CompressedContents;
Reimplement debug info compression by compressing the whole section, rather than a fragment. To support compressing the debug_line section that contains multiple fragments (due, I believe, to variation in choices of line table encoding depending on the size of instruction ranges in the actual program code) we needed to support compressing multiple MCFragments in a single pass. This patch implements that behavior by mutating the post-relaxed and relocated section to be the compressed form of its former self, including renaming the section. This is a more flexible (and less invasive, to a degree) implementation that will allow for other features such as "use compression only if it's smaller than the uncompressed data". Compressing debug_frame would be a possible further extension to this work, but I've left it for now. The hurdle there is alignment sections - which might require going as far as to refactor MCAssembler.cpp:writeFragment to handle writing to a byte buffer or an MCObjectWriter (there's already a virtual call there, so it shouldn't add substantial compile-time cost) which could in turn involve refactoring MCAsmBackend::writeNopData to use that same abstraction... which involves touching all the backends. This would remove the limited handling of fragment writing seen in ELFObjectWriter.cpp:getUncompressedData which would be nice - but it's more invasive. I did discover that I (perhaps obviously) don't need to handle relocations when I rewrite the fragments - since the relocations have already been applied and computed (and stored into ELFObjectWriter::Relocations) by this stage (necessarily, because we need to have written any immediate values or assembly-time relocations into the data already before we compress it, which we have). The test case doesn't necessarily cover that in detail - I can add more test coverage if that's preferred. llvm-svn: 205990
2014-04-11 05:53:53 +08:00
}
void ELFObjectWriter::WriteSecHdrEntry(uint32_t Name, uint32_t Type,
uint64_t Flags, uint64_t Address,
uint64_t Offset, uint64_t Size,
uint32_t Link, uint32_t Info,
uint64_t Alignment,
uint64_t EntrySize) {
write32(Name); // sh_name: index into string table
write32(Type); // sh_type
WriteWord(Flags); // sh_flags
WriteWord(Address); // sh_addr
WriteWord(Offset); // sh_offset
WriteWord(Size); // sh_size
write32(Link); // sh_link
write32(Info); // sh_info
WriteWord(Alignment); // sh_addralign
WriteWord(EntrySize); // sh_entsize
}
void ELFObjectWriter::writeRelocations(const MCAssembler &Asm,
const MCSectionELF &Sec) {
std::vector<ELFRelocationEntry> &Relocs = Relocations[&Sec];
// We record relocations by pushing to the end of a vector. Reverse the vector
// to get the relocations in the order they were created.
// In most cases that is not important, but it can be for special sections
// (.eh_frame) or specific relocations (TLS optimizations on SystemZ).
std::reverse(Relocs.begin(), Relocs.end());
// Sort the relocation entries. MIPS needs this.
TargetObjectWriter->sortRelocs(Asm, Relocs);
for (unsigned i = 0, e = Relocs.size(); i != e; ++i) {
const ELFRelocationEntry &Entry = Relocs[e - i - 1];
unsigned Index = Entry.Symbol ? Entry.Symbol->getIndex() : 0;
if (is64Bit()) {
write(Entry.Offset);
The ELF relocation record format is different for N64 which many Mips 64 ABIs use than for O64 which many if not all other target ABIs use. Most architectures have the following 64 bit relocation record format: typedef struct { Elf64_Addr r_offset; /* Address of reference */ Elf64_Xword r_info; /* Symbol index and type of relocation */ } Elf64_Rel; typedef struct { Elf64_Addr r_offset; Elf64_Xword r_info; Elf64_Sxword r_addend; } Elf64_Rela; Whereas N64 has the following format: typedef struct { Elf64_Addr r_offset;/* Address of reference */ Elf64_Word r_sym; /* Symbol index */ Elf64_Byte r_ssym; /* Special symbol */ Elf64_Byte r_type3; /* Relocation type */ Elf64_Byte r_type2; /* Relocation type */ Elf64_Byte r_type; /* Relocation type */ } Elf64_Rel; typedef struct { Elf64_Addr r_offset;/* Address of reference */ Elf64_Word r_sym; /* Symbol index */ Elf64_Byte r_ssym; /* Special symbol */ Elf64_Byte r_type3; /* Relocation type */ Elf64_Byte r_type2; /* Relocation type */ Elf64_Byte r_type; /* Relocation type */ Elf64_Sxword r_addend; } Elf64_Rela; The structure is the same size, but the r_info data element is now 5 separate elements. Besides the content aspects, endian byte reordering will be different for the area with each element being endianized separately. I treat this as generic and continue to pass r_type as an integer masking and unmasking the byte sized N64 values for N64 mode. I've implemented this and it causes no affect on other current targets. This passes make check. Jack llvm-svn: 159299
2012-06-28 06:28:30 +08:00
if (TargetObjectWriter->isN64()) {
write(uint32_t(Index));
write(TargetObjectWriter->getRSsym(Entry.Type));
write(TargetObjectWriter->getRType3(Entry.Type));
write(TargetObjectWriter->getRType2(Entry.Type));
write(TargetObjectWriter->getRType(Entry.Type));
} else {
The ELF relocation record format is different for N64 which many Mips 64 ABIs use than for O64 which many if not all other target ABIs use. Most architectures have the following 64 bit relocation record format: typedef struct { Elf64_Addr r_offset; /* Address of reference */ Elf64_Xword r_info; /* Symbol index and type of relocation */ } Elf64_Rel; typedef struct { Elf64_Addr r_offset; Elf64_Xword r_info; Elf64_Sxword r_addend; } Elf64_Rela; Whereas N64 has the following format: typedef struct { Elf64_Addr r_offset;/* Address of reference */ Elf64_Word r_sym; /* Symbol index */ Elf64_Byte r_ssym; /* Special symbol */ Elf64_Byte r_type3; /* Relocation type */ Elf64_Byte r_type2; /* Relocation type */ Elf64_Byte r_type; /* Relocation type */ } Elf64_Rel; typedef struct { Elf64_Addr r_offset;/* Address of reference */ Elf64_Word r_sym; /* Symbol index */ Elf64_Byte r_ssym; /* Special symbol */ Elf64_Byte r_type3; /* Relocation type */ Elf64_Byte r_type2; /* Relocation type */ Elf64_Byte r_type; /* Relocation type */ Elf64_Sxword r_addend; } Elf64_Rela; The structure is the same size, but the r_info data element is now 5 separate elements. Besides the content aspects, endian byte reordering will be different for the area with each element being endianized separately. I treat this as generic and continue to pass r_type as an integer masking and unmasking the byte sized N64 values for N64 mode. I've implemented this and it causes no affect on other current targets. This passes make check. Jack llvm-svn: 159299
2012-06-28 06:28:30 +08:00
struct ELF::Elf64_Rela ERE64;
ERE64.setSymbolAndType(Index, Entry.Type);
write(ERE64.r_info);
The ELF relocation record format is different for N64 which many Mips 64 ABIs use than for O64 which many if not all other target ABIs use. Most architectures have the following 64 bit relocation record format: typedef struct { Elf64_Addr r_offset; /* Address of reference */ Elf64_Xword r_info; /* Symbol index and type of relocation */ } Elf64_Rel; typedef struct { Elf64_Addr r_offset; Elf64_Xword r_info; Elf64_Sxword r_addend; } Elf64_Rela; Whereas N64 has the following format: typedef struct { Elf64_Addr r_offset;/* Address of reference */ Elf64_Word r_sym; /* Symbol index */ Elf64_Byte r_ssym; /* Special symbol */ Elf64_Byte r_type3; /* Relocation type */ Elf64_Byte r_type2; /* Relocation type */ Elf64_Byte r_type; /* Relocation type */ } Elf64_Rel; typedef struct { Elf64_Addr r_offset;/* Address of reference */ Elf64_Word r_sym; /* Symbol index */ Elf64_Byte r_ssym; /* Special symbol */ Elf64_Byte r_type3; /* Relocation type */ Elf64_Byte r_type2; /* Relocation type */ Elf64_Byte r_type; /* Relocation type */ Elf64_Sxword r_addend; } Elf64_Rela; The structure is the same size, but the r_info data element is now 5 separate elements. Besides the content aspects, endian byte reordering will be different for the area with each element being endianized separately. I treat this as generic and continue to pass r_type as an integer masking and unmasking the byte sized N64 values for N64 mode. I've implemented this and it causes no affect on other current targets. This passes make check. Jack llvm-svn: 159299
2012-06-28 06:28:30 +08:00
}
if (hasRelocationAddend())
write(Entry.Addend);
} else {
write(uint32_t(Entry.Offset));
struct ELF::Elf32_Rela ERE32;
ERE32.setSymbolAndType(Index, Entry.Type);
write(ERE32.r_info);
if (hasRelocationAddend())
write(uint32_t(Entry.Addend));
}
}
}
const MCSectionELF *ELFObjectWriter::createStringTable(MCContext &Ctx) {
const MCSectionELF *StrtabSection = SectionTable[StringTableIndex - 1];
StrTabBuilder.write(getStream());
return StrtabSection;
}
void ELFObjectWriter::writeSection(const SectionIndexMapTy &SectionIndexMap,
uint32_t GroupSymbolIndex, uint64_t Offset,
uint64_t Size, const MCSectionELF &Section) {
uint64_t sh_link = 0;
uint64_t sh_info = 0;
switch(Section.getType()) {
default:
// Nothing to do.
break;
case ELF::SHT_DYNAMIC:
llvm_unreachable("SHT_DYNAMIC in a relocatable object");
case ELF::SHT_REL:
case ELF::SHT_RELA: {
sh_link = SymbolTableIndex;
assert(sh_link && ".symtab not found");
const MCSectionELF *InfoSection = Section.getAssociatedSection();
sh_info = SectionIndexMap.lookup(InfoSection);
break;
}
case ELF::SHT_SYMTAB:
case ELF::SHT_DYNSYM:
sh_link = StringTableIndex;
sh_info = LastLocalSymbolIndex;
break;
case ELF::SHT_SYMTAB_SHNDX:
sh_link = SymbolTableIndex;
break;
case ELF::SHT_GROUP:
sh_link = SymbolTableIndex;
sh_info = GroupSymbolIndex;
break;
}
if (TargetObjectWriter->getEMachine() == ELF::EM_ARM &&
Section.getType() == ELF::SHT_ARM_EXIDX)
sh_link = SectionIndexMap.lookup(Section.getAssociatedSection());
WriteSecHdrEntry(StrTabBuilder.getOffset(Section.getSectionName()),
Section.getType(), Section.getFlags(), 0, Offset, Size,
sh_link, sh_info, Section.getAlignment(),
Section.getEntrySize());
}
void ELFObjectWriter::writeSectionHeader(
const MCAsmLayout &Layout, const SectionIndexMapTy &SectionIndexMap,
const SectionOffsetsTy &SectionOffsets) {
const unsigned NumSections = SectionTable.size();
// Null section first.
uint64_t FirstSectionSize =
(NumSections + 1) >= ELF::SHN_LORESERVE ? NumSections + 1 : 0;
WriteSecHdrEntry(0, 0, 0, 0, 0, FirstSectionSize, 0, 0, 0, 0);
for (const MCSectionELF *Section : SectionTable) {
uint32_t GroupSymbolIndex;
unsigned Type = Section->getType();
if (Type != ELF::SHT_GROUP)
GroupSymbolIndex = 0;
else
GroupSymbolIndex = Section->getGroup()->getIndex();
const std::pair<uint64_t, uint64_t> &Offsets =
SectionOffsets.find(Section)->second;
uint64_t Size;
if (Type == ELF::SHT_NOBITS)
Size = Layout.getSectionAddressSize(Section);
else
Size = Offsets.second - Offsets.first;
writeSection(SectionIndexMap, GroupSymbolIndex, Offsets.first, Size,
*Section);
}
}
void ELFObjectWriter::writeObject(MCAssembler &Asm,
const MCAsmLayout &Layout) {
MCContext &Ctx = Asm.getContext();
MCSectionELF *StrtabSection =
Ctx.getELFSection(".strtab", ELF::SHT_STRTAB, 0);
StringTableIndex = addToSectionTable(StrtabSection);
RevGroupMapTy RevGroupMap;
SectionIndexMapTy SectionIndexMap;
std::map<const MCSymbol *, std::vector<const MCSectionELF *>> GroupMembers;
// Write out the ELF header ...
writeHeader(Asm);
// ... then the sections ...
SectionOffsetsTy SectionOffsets;
std::vector<MCSectionELF *> Groups;
std::vector<MCSectionELF *> Relocations;
for (MCSection &Sec : Asm) {
MCSectionELF &Section = static_cast<MCSectionELF &>(Sec);
align(Section.getAlignment());
// Remember the offset into the file for this section.
uint64_t SecStart = getStream().tell();
const MCSymbolELF *SignatureSymbol = Section.getGroup();
writeSectionData(Asm, Section, Layout);
uint64_t SecEnd = getStream().tell();
SectionOffsets[&Section] = std::make_pair(SecStart, SecEnd);
MCSectionELF *RelSection = createRelocationSection(Ctx, Section);
if (SignatureSymbol) {
Asm.registerSymbol(*SignatureSymbol);
unsigned &GroupIdx = RevGroupMap[SignatureSymbol];
if (!GroupIdx) {
MCSectionELF *Group = Ctx.createELFGroupSection(SignatureSymbol);
GroupIdx = addToSectionTable(Group);
Group->setAlignment(4);
Groups.push_back(Group);
}
std::vector<const MCSectionELF *> &Members =
GroupMembers[SignatureSymbol];
Members.push_back(&Section);
if (RelSection)
Members.push_back(RelSection);
}
SectionIndexMap[&Section] = addToSectionTable(&Section);
if (RelSection) {
SectionIndexMap[RelSection] = addToSectionTable(RelSection);
Relocations.push_back(RelSection);
}
}
for (MCSectionELF *Group : Groups) {
align(Group->getAlignment());
// Remember the offset into the file for this section.
uint64_t SecStart = getStream().tell();
const MCSymbol *SignatureSymbol = Group->getGroup();
assert(SignatureSymbol);
write(uint32_t(ELF::GRP_COMDAT));
for (const MCSectionELF *Member : GroupMembers[SignatureSymbol]) {
uint32_t SecIndex = SectionIndexMap.lookup(Member);
write(SecIndex);
}
uint64_t SecEnd = getStream().tell();
SectionOffsets[Group] = std::make_pair(SecStart, SecEnd);
}
// Compute symbol table information.
computeSymbolTable(Asm, Layout, SectionIndexMap, RevGroupMap, SectionOffsets);
for (MCSectionELF *RelSection : Relocations) {
align(RelSection->getAlignment());
// Remember the offset into the file for this section.
uint64_t SecStart = getStream().tell();
writeRelocations(Asm, *RelSection->getAssociatedSection());
uint64_t SecEnd = getStream().tell();
SectionOffsets[RelSection] = std::make_pair(SecStart, SecEnd);
}
{
uint64_t SecStart = getStream().tell();
const MCSectionELF *Sec = createStringTable(Ctx);
uint64_t SecEnd = getStream().tell();
SectionOffsets[Sec] = std::make_pair(SecStart, SecEnd);
}
uint64_t NaturalAlignment = is64Bit() ? 8 : 4;
align(NaturalAlignment);
const uint64_t SectionHeaderOffset = getStream().tell();
// ... then the section header table ...
writeSectionHeader(Layout, SectionIndexMap, SectionOffsets);
uint16_t NumSections = (SectionTable.size() + 1 >= ELF::SHN_LORESERVE)
? (uint16_t)ELF::SHN_UNDEF
: SectionTable.size() + 1;
if (sys::IsLittleEndianHost != IsLittleEndian)
sys::swapByteOrder(NumSections);
unsigned NumSectionsOffset;
if (is64Bit()) {
uint64_t Val = SectionHeaderOffset;
if (sys::IsLittleEndianHost != IsLittleEndian)
sys::swapByteOrder(Val);
getStream().pwrite(reinterpret_cast<char *>(&Val), sizeof(Val),
offsetof(ELF::Elf64_Ehdr, e_shoff));
NumSectionsOffset = offsetof(ELF::Elf64_Ehdr, e_shnum);
} else {
uint32_t Val = SectionHeaderOffset;
if (sys::IsLittleEndianHost != IsLittleEndian)
sys::swapByteOrder(Val);
getStream().pwrite(reinterpret_cast<char *>(&Val), sizeof(Val),
offsetof(ELF::Elf32_Ehdr, e_shoff));
NumSectionsOffset = offsetof(ELF::Elf32_Ehdr, e_shnum);
}
getStream().pwrite(reinterpret_cast<char *>(&NumSections),
sizeof(NumSections), NumSectionsOffset);
}
bool ELFObjectWriter::isSymbolRefDifferenceFullyResolvedImpl(
const MCAssembler &Asm, const MCSymbol &SA, const MCFragment &FB,
bool InSet, bool IsPCRel) const {
const auto &SymA = cast<MCSymbolELF>(SA);
if (IsPCRel) {
assert(!InSet);
if (::isWeak(SymA))
return false;
}
return MCObjectWriter::isSymbolRefDifferenceFullyResolvedImpl(Asm, SymA, FB,
InSet, IsPCRel);
}
bool ELFObjectWriter::isWeak(const MCSymbol &S) const {
const auto &Sym = cast<MCSymbolELF>(S);
if (::isWeak(Sym))
return true;
// It is invalid to replace a reference to a global in a comdat
// with a reference to a local since out of comdat references
// to a local are forbidden.
// We could try to return false for more cases, like the reference
// being in the same comdat or Sym being an alias to another global,
// but it is not clear if it is worth the effort.
if (Sym.getBinding() != ELF::STB_GLOBAL)
return false;
if (!Sym.isInSection())
return false;
const auto &Sec = cast<MCSectionELF>(Sym.getSection());
return Sec.getGroup();
}
MCObjectWriter *llvm::createELFObjectWriter(MCELFObjectTargetWriter *MOTW,
raw_pwrite_stream &OS,
bool IsLittleEndian) {
2011-12-22 11:24:43 +08:00
return new ELFObjectWriter(MOTW, OS, IsLittleEndian);
}