maxjhandsome
/
llvm-project
forked from OSchip/llvm-project
1
0
Fork 0
Code Issues Pull Requests Packages Releases Wiki Activity
llvm-project/llvm/test/Other/optimization-remarks-lazy-b...

89 lines
3.8 KiB
LLVM
Raw Normal View History

[OptRemark,LDist] RFC: Add hotness attribute Summary: This is the first set of changes implementing the RFC from http://thread.gmane.org/gmane.comp.compilers.llvm.devel/98334 This is a cross-sectional patch; rather than implementing the hotness attribute for all optimization remarks and all passes in a patch set, it implements it for the 'missed-optimization' remark for Loop Distribution. My goal is to shake out the design issues before scaling it up to other types and passes. Hotness is computed as an integer as the multiplication of the block frequency with the function entry count. It's only printed in opt currently since clang prints the diagnostic fields directly. E.g.: remark: /tmp/t.c:3:3: loop not distributed: use -Rpass-analysis=loop-distribute for more info (hotness: 300) A new API added is similar to emitOptimizationRemarkMissed. The difference is that it additionally takes a code region that the diagnostic corresponds to. From this, hotness is computed using BFI. The new API is exposed via an analysis pass so that it can be made dependent on LazyBFI. (Thanks to Hal for the analysis pass idea.) This feature can all be enabled by setDiagnosticHotnessRequested in the LLVM context. If this is off, LazyBFI is not calculated (D22141) so there should be no overhead. A new command-line option is added to turn this on in opt. My plan is to switch all user of emitOptimizationRemark* to use this module instead. Reviewers: hfinkel Subscribers: rcox2, mzolotukhin, llvm-commits Differential Revision: http://reviews.llvm.org/D21771 llvm-svn: 275583
2016-07-16 01:23:20 +08:00
; Check that BFI is not computed when -pass-remarks-with-hotness is off
[LDist] Match behavior between invoking via optimization pipeline or opt -loop-distribute In r267672, where the loop distribution pragma was introduced, I tried it hard to keep the old behavior for opt: when opt is invoked with -loop-distribute, it should distribute the loop (it's off by default when ran via the optimization pipeline). As MichaelZ has discovered this has the unintended consequence of breaking a very common developer work-flow to reproduce compilations using opt: First you print the pass pipeline of clang with -debug-pass=Arguments and then invoking opt with the returned arguments. clang -debug-pass will include -loop-distribute but the pass is invoked with default=off so nothing happens unless the loop carries the pragma. While through opt (default=on) we will try to distribute all loops. This changes opt's default to off as well to match clang. The tests are modified to explicitly enable the transformation. llvm-svn: 290235
2016-12-21 12:07:40 +08:00
; RUN: opt -loop-distribute -enable-loop-distribute -S -pass-remarks-missed=loop-distribute \
[BPI] Add new LazyBPI analysis Summary: The motivation is the same as in D22141: In order to add the hotness attribute to optimization remarks we need BFI to be available in all passes that emit optimization remarks. BFI depends on BPI so unless we make this lazy as well we would still compute BPI unconditionally. The solution is to use the new LazyBPI pass in LazyBFI and only compute BPI when computation of BFI is requested by the client. I extended the laziness test using a LoopDistribute test to also cover BPI. Reviewers: hfinkel, davidxl Subscribers: llvm-commits Differential Revision: https://reviews.llvm.org/D22835 llvm-svn: 277083
2016-07-29 07:31:12 +08:00
; RUN: -debug-only=block-freq,branch-prob -pass-remarks-with-hotness \
; RUN: < %s 2>&1 | FileCheck %s --check-prefix=HOTNESS
[LDist] Match behavior between invoking via optimization pipeline or opt -loop-distribute In r267672, where the loop distribution pragma was introduced, I tried it hard to keep the old behavior for opt: when opt is invoked with -loop-distribute, it should distribute the loop (it's off by default when ran via the optimization pipeline). As MichaelZ has discovered this has the unintended consequence of breaking a very common developer work-flow to reproduce compilations using opt: First you print the pass pipeline of clang with -debug-pass=Arguments and then invoking opt with the returned arguments. clang -debug-pass will include -loop-distribute but the pass is invoked with default=off so nothing happens unless the loop carries the pragma. While through opt (default=on) we will try to distribute all loops. This changes opt's default to off as well to match clang. The tests are modified to explicitly enable the transformation. llvm-svn: 290235
2016-12-21 12:07:40 +08:00
; RUN: opt -loop-distribute -enable-loop-distribute -S -pass-remarks-missed=loop-distribute \
[BPI] Add new LazyBPI analysis Summary: The motivation is the same as in D22141: In order to add the hotness attribute to optimization remarks we need BFI to be available in all passes that emit optimization remarks. BFI depends on BPI so unless we make this lazy as well we would still compute BPI unconditionally. The solution is to use the new LazyBPI pass in LazyBFI and only compute BPI when computation of BFI is requested by the client. I extended the laziness test using a LoopDistribute test to also cover BPI. Reviewers: hfinkel, davidxl Subscribers: llvm-commits Differential Revision: https://reviews.llvm.org/D22835 llvm-svn: 277083
2016-07-29 07:31:12 +08:00
; RUN: -debug-only=block-freq,branch-prob \
; RUN: < %s 2>&1 | FileCheck %s --check-prefix=NO_HOTNESS
[OptRemark,LDist] RFC: Add hotness attribute Summary: This is the first set of changes implementing the RFC from http://thread.gmane.org/gmane.comp.compilers.llvm.devel/98334 This is a cross-sectional patch; rather than implementing the hotness attribute for all optimization remarks and all passes in a patch set, it implements it for the 'missed-optimization' remark for Loop Distribution. My goal is to shake out the design issues before scaling it up to other types and passes. Hotness is computed as an integer as the multiplication of the block frequency with the function entry count. It's only printed in opt currently since clang prints the diagnostic fields directly. E.g.: remark: /tmp/t.c:3:3: loop not distributed: use -Rpass-analysis=loop-distribute for more info (hotness: 300) A new API added is similar to emitOptimizationRemarkMissed. The difference is that it additionally takes a code region that the diagnostic corresponds to. From this, hotness is computed using BFI. The new API is exposed via an analysis pass so that it can be made dependent on LazyBFI. (Thanks to Hal for the analysis pass idea.) This feature can all be enabled by setDiagnosticHotnessRequested in the LLVM context. If this is off, LazyBFI is not calculated (D22141) so there should be no overhead. A new command-line option is added to turn this on in opt. My plan is to switch all user of emitOptimizationRemark* to use this module instead. Reviewers: hfinkel Subscribers: rcox2, mzolotukhin, llvm-commits Differential Revision: http://reviews.llvm.org/D21771 llvm-svn: 275583
2016-07-16 01:23:20 +08:00
[LoopDist] Port to new PM Summary: The direct motivation for the port is to ensure that the OptRemarkEmitter tests work with the new PM. This remains a function pass because we not only create multiple loops but could also version the original loop. In the test I need to invoke opt with -passes='require<aa>,loop-distribute'. LoopDistribute does not directly depend on AA however LAA does. LAA uses getCachedResult so I *think* we need manually pull in 'aa'. Reviewers: davidxl, silvas Subscribers: sanjoy, llvm-commits, mzolotukhin Differential Revision: https://reviews.llvm.org/D22437 llvm-svn: 275811
2016-07-19 00:29:27 +08:00
; RUN: opt -passes='require<aa>,loop-distribute' -S -pass-remarks-missed=loop-distribute \
[BPI] Add new LazyBPI analysis Summary: The motivation is the same as in D22141: In order to add the hotness attribute to optimization remarks we need BFI to be available in all passes that emit optimization remarks. BFI depends on BPI so unless we make this lazy as well we would still compute BPI unconditionally. The solution is to use the new LazyBPI pass in LazyBFI and only compute BPI when computation of BFI is requested by the client. I extended the laziness test using a LoopDistribute test to also cover BPI. Reviewers: hfinkel, davidxl Subscribers: llvm-commits Differential Revision: https://reviews.llvm.org/D22835 llvm-svn: 277083
2016-07-29 07:31:12 +08:00
; RUN: -debug-only=block-freq,branch-prob -pass-remarks-with-hotness \
; RUN: < %s 2>&1 | FileCheck %s --check-prefix=HOTNESS
[LoopDist] Port to new PM Summary: The direct motivation for the port is to ensure that the OptRemarkEmitter tests work with the new PM. This remains a function pass because we not only create multiple loops but could also version the original loop. In the test I need to invoke opt with -passes='require<aa>,loop-distribute'. LoopDistribute does not directly depend on AA however LAA does. LAA uses getCachedResult so I *think* we need manually pull in 'aa'. Reviewers: davidxl, silvas Subscribers: sanjoy, llvm-commits, mzolotukhin Differential Revision: https://reviews.llvm.org/D22437 llvm-svn: 275811
2016-07-19 00:29:27 +08:00
; RUN: opt -passes='require<aa>,loop-distribute' -S -pass-remarks-missed=loop-distribute \
[BPI] Add new LazyBPI analysis Summary: The motivation is the same as in D22141: In order to add the hotness attribute to optimization remarks we need BFI to be available in all passes that emit optimization remarks. BFI depends on BPI so unless we make this lazy as well we would still compute BPI unconditionally. The solution is to use the new LazyBPI pass in LazyBFI and only compute BPI when computation of BFI is requested by the client. I extended the laziness test using a LoopDistribute test to also cover BPI. Reviewers: hfinkel, davidxl Subscribers: llvm-commits Differential Revision: https://reviews.llvm.org/D22835 llvm-svn: 277083
2016-07-29 07:31:12 +08:00
; RUN: -debug-only=block-freq,branch-prob \
; RUN: < %s 2>&1 | FileCheck %s --check-prefix=NO_HOTNESS
[LoopDist] Port to new PM Summary: The direct motivation for the port is to ensure that the OptRemarkEmitter tests work with the new PM. This remains a function pass because we not only create multiple loops but could also version the original loop. In the test I need to invoke opt with -passes='require<aa>,loop-distribute'. LoopDistribute does not directly depend on AA however LAA does. LAA uses getCachedResult so I *think* we need manually pull in 'aa'. Reviewers: davidxl, silvas Subscribers: sanjoy, llvm-commits, mzolotukhin Differential Revision: https://reviews.llvm.org/D22437 llvm-svn: 275811
2016-07-19 00:29:27 +08:00
[OptRemark,LDist] RFC: Add hotness attribute Summary: This is the first set of changes implementing the RFC from http://thread.gmane.org/gmane.comp.compilers.llvm.devel/98334 This is a cross-sectional patch; rather than implementing the hotness attribute for all optimization remarks and all passes in a patch set, it implements it for the 'missed-optimization' remark for Loop Distribution. My goal is to shake out the design issues before scaling it up to other types and passes. Hotness is computed as an integer as the multiplication of the block frequency with the function entry count. It's only printed in opt currently since clang prints the diagnostic fields directly. E.g.: remark: /tmp/t.c:3:3: loop not distributed: use -Rpass-analysis=loop-distribute for more info (hotness: 300) A new API added is similar to emitOptimizationRemarkMissed. The difference is that it additionally takes a code region that the diagnostic corresponds to. From this, hotness is computed using BFI. The new API is exposed via an analysis pass so that it can be made dependent on LazyBFI. (Thanks to Hal for the analysis pass idea.) This feature can all be enabled by setDiagnosticHotnessRequested in the LLVM context. If this is off, LazyBFI is not calculated (D22141) so there should be no overhead. A new command-line option is added to turn this on in opt. My plan is to switch all user of emitOptimizationRemark* to use this module instead. Reviewers: hfinkel Subscribers: rcox2, mzolotukhin, llvm-commits Differential Revision: http://reviews.llvm.org/D21771 llvm-svn: 275583
2016-07-16 01:23:20 +08:00
; REQUIRES: asserts
[BPI] Add new LazyBPI analysis Summary: The motivation is the same as in D22141: In order to add the hotness attribute to optimization remarks we need BFI to be available in all passes that emit optimization remarks. BFI depends on BPI so unless we make this lazy as well we would still compute BPI unconditionally. The solution is to use the new LazyBPI pass in LazyBFI and only compute BPI when computation of BFI is requested by the client. I extended the laziness test using a LoopDistribute test to also cover BPI. Reviewers: hfinkel, davidxl Subscribers: llvm-commits Differential Revision: https://reviews.llvm.org/D22835 llvm-svn: 277083
2016-07-29 07:31:12 +08:00
; HOTNESS: Branch Probability Info : forced
[OptRemark,LDist] RFC: Add hotness attribute Summary: This is the first set of changes implementing the RFC from http://thread.gmane.org/gmane.comp.compilers.llvm.devel/98334 This is a cross-sectional patch; rather than implementing the hotness attribute for all optimization remarks and all passes in a patch set, it implements it for the 'missed-optimization' remark for Loop Distribution. My goal is to shake out the design issues before scaling it up to other types and passes. Hotness is computed as an integer as the multiplication of the block frequency with the function entry count. It's only printed in opt currently since clang prints the diagnostic fields directly. E.g.: remark: /tmp/t.c:3:3: loop not distributed: use -Rpass-analysis=loop-distribute for more info (hotness: 300) A new API added is similar to emitOptimizationRemarkMissed. The difference is that it additionally takes a code region that the diagnostic corresponds to. From this, hotness is computed using BFI. The new API is exposed via an analysis pass so that it can be made dependent on LazyBFI. (Thanks to Hal for the analysis pass idea.) This feature can all be enabled by setDiagnosticHotnessRequested in the LLVM context. If this is off, LazyBFI is not calculated (D22141) so there should be no overhead. A new command-line option is added to turn this on in opt. My plan is to switch all user of emitOptimizationRemark* to use this module instead. Reviewers: hfinkel Subscribers: rcox2, mzolotukhin, llvm-commits Differential Revision: http://reviews.llvm.org/D21771 llvm-svn: 275583
2016-07-16 01:23:20 +08:00
; HOTNESS: block-frequency: forced
[BPI] Add new LazyBPI analysis Summary: The motivation is the same as in D22141: In order to add the hotness attribute to optimization remarks we need BFI to be available in all passes that emit optimization remarks. BFI depends on BPI so unless we make this lazy as well we would still compute BPI unconditionally. The solution is to use the new LazyBPI pass in LazyBFI and only compute BPI when computation of BFI is requested by the client. I extended the laziness test using a LoopDistribute test to also cover BPI. Reviewers: hfinkel, davidxl Subscribers: llvm-commits Differential Revision: https://reviews.llvm.org/D22835 llvm-svn: 277083
2016-07-29 07:31:12 +08:00
; NO_HOTNESS-NOT: Branch Probability Info : forced
[OptRemark,LDist] RFC: Add hotness attribute Summary: This is the first set of changes implementing the RFC from http://thread.gmane.org/gmane.comp.compilers.llvm.devel/98334 This is a cross-sectional patch; rather than implementing the hotness attribute for all optimization remarks and all passes in a patch set, it implements it for the 'missed-optimization' remark for Loop Distribution. My goal is to shake out the design issues before scaling it up to other types and passes. Hotness is computed as an integer as the multiplication of the block frequency with the function entry count. It's only printed in opt currently since clang prints the diagnostic fields directly. E.g.: remark: /tmp/t.c:3:3: loop not distributed: use -Rpass-analysis=loop-distribute for more info (hotness: 300) A new API added is similar to emitOptimizationRemarkMissed. The difference is that it additionally takes a code region that the diagnostic corresponds to. From this, hotness is computed using BFI. The new API is exposed via an analysis pass so that it can be made dependent on LazyBFI. (Thanks to Hal for the analysis pass idea.) This feature can all be enabled by setDiagnosticHotnessRequested in the LLVM context. If this is off, LazyBFI is not calculated (D22141) so there should be no overhead. A new command-line option is added to turn this on in opt. My plan is to switch all user of emitOptimizationRemark* to use this module instead. Reviewers: hfinkel Subscribers: rcox2, mzolotukhin, llvm-commits Differential Revision: http://reviews.llvm.org/D21771 llvm-svn: 275583
2016-07-16 01:23:20 +08:00
; NO_HOTNESS-NOT: block-frequency: forced
; This is the input program:
;
; 1 void forced (char *A, char *B, char *C, int N) {
; 2 #pragma clang loop distribute(enable)
; 3 for(int i = 0; i < N; i++) {
; 4 A[i] = B[i] * C[i];
; 5 }
; 6 }
target datalayout = "e-m:o-i64:64-f80:128-n8:16:32:64-S128"
target triple = "x86_64-apple-macosx10.11.0"
define void @forced(i8* %A, i8* %B, i8* %C, i32 %N) !dbg !7 !prof !22 {
entry:
%cmp12 = icmp sgt i32 %N, 0, !dbg !9
br i1 %cmp12, label %ph, label %for.cond.cleanup, !dbg !10, !prof !23
ph:
br label %for.body
for.body:
%indvars.iv = phi i64 [ %indvars.iv.next, %for.body ], [ 0, %ph ]
%arrayidx = getelementptr inbounds i8, i8* %B, i64 %indvars.iv, !dbg !12
%0 = load i8, i8* %arrayidx, align 1, !dbg !12, !tbaa !13
%arrayidx2 = getelementptr inbounds i8, i8* %C, i64 %indvars.iv, !dbg !16
%1 = load i8, i8* %arrayidx2, align 1, !dbg !16, !tbaa !13
%mul = mul i8 %1, %0, !dbg !17
%arrayidx6 = getelementptr inbounds i8, i8* %A, i64 %indvars.iv, !dbg !18
store i8 %mul, i8* %arrayidx6, align 1, !dbg !19, !tbaa !13
%indvars.iv.next = add nuw nsw i64 %indvars.iv, 1, !dbg !10
%lftr.wideiv = trunc i64 %indvars.iv.next to i32, !dbg !10
%exitcond = icmp eq i32 %lftr.wideiv, %N, !dbg !10
br i1 %exitcond, label %for.cond.cleanup, label %for.body, !dbg !10, !llvm.loop !20, !prof !24
for.cond.cleanup:
ret void, !dbg !11
}
!llvm.dbg.cu = !{!0}
!llvm.module.flags = !{!3, !4}
!0 = distinct !DICompileUnit(language: DW_LANG_C99, file: !1, producer: "clang version 3.9.0 (trunk 267633) (llvm/trunk 267675)", isOptimized: true, runtimeVersion: 0, emissionKind: LineTablesOnly, enums: !2)
!1 = !DIFile(filename: "/tmp/t.c", directory: "/tmp")
!2 = !{}
!3 = !{i32 2, !"Dwarf Version", i32 2}
!4 = !{i32 2, !"Debug Info Version", i32 3}
!7 = distinct !DISubprogram(name: "forced", scope: !1, file: !1, line: 1, type: !8, isLocal: false, isDefinition: true, scopeLine: 1, flags: DIFlagPrototyped, isOptimized: true, unit: !0, variables: !2)
!8 = !DISubroutineType(types: !2)
!9 = !DILocation(line: 3, column: 20, scope: !7)
!10 = !DILocation(line: 3, column: 3, scope: !7)
!11 = !DILocation(line: 6, column: 1, scope: !7)
!12 = !DILocation(line: 4, column: 12, scope: !7)
!13 = !{!14, !14, i64 0}
!14 = !{!"omnipotent char", !15, i64 0}
!15 = !{!"Simple C/C++ TBAA"}
!16 = !DILocation(line: 4, column: 19, scope: !7)
!17 = !DILocation(line: 4, column: 17, scope: !7)
!18 = !DILocation(line: 4, column: 5, scope: !7)
!19 = !DILocation(line: 4, column: 10, scope: !7)
!20 = distinct !{!20, !21}
!21 = !{!"llvm.loop.distribute.enable", i1 true}
!22 = !{!"function_entry_count", i64 3}
!23 = !{!"branch_weights", i32 99, i32 1}
!24 = !{!"branch_weights", i32 1, i32 99}