maxjhandsome
/
llvm-project
forked from OSchip/llvm-project
1
0
Fork 0
Code Issues Pull Requests Packages Releases Wiki Activity
llvm-project/llvm/test/CodeGen/SystemZ/loop-01.ll

323 lines
11 KiB
LLVM
Raw Normal View History

[SystemZ] Implement isLegalAddressingMode() The loop optimizers were assuming that scales > 1 were OK. I think this is actually a bug in TargetLoweringBase::isLegalAddressingMode(), since it seems to be trying to reject anything that isn't r+i or r+r, but it has no default case for scales other than 0, 1 or 2. Implementing the hook for z means that z can no longer test any change there though. llvm-svn: 187497
2013-07-31 20:58:26 +08:00
; Test loop tuning.
;
; RUN: llc < %s -mtriple=s390x-linux-gnu -mcpu=z10 | FileCheck %s
[LoopStrenghtReduce] Refactoring and addition of a new target cost function. Refactored so that a LSRUse owns its fixups, as oppsed to letting the LSRInstance own them. This makes it easier to rate formulas for LSRUses, since the fixups are available directly. The Offsets vector has been removed since it was no longer necessary. New target hook isFoldableMemAccessOffset(), which is used during formula rating. For SystemZ, this is useful to express that loads and stores with float or vector types with a big/negative offset should be avoided in loops. Without this, LSR will generate a lot of negative offsets that would require extra instructions for loading the address. Updated tests: test/CodeGen/SystemZ/loop-01.ll Reviewed by: Quentin Colombet and Ulrich Weigand. https://reviews.llvm.org/D19152 llvm-svn: 278927
2016-08-17 21:24:19 +08:00
; RUN: llc < %s -mtriple=s390x-linux-gnu -mcpu=z13 \
; RUN: | FileCheck %s -check-prefix=CHECK -check-prefix=CHECK-Z13
[SystemZ] Implement isLegalAddressingMode() The loop optimizers were assuming that scales > 1 were OK. I think this is actually a bug in TargetLoweringBase::isLegalAddressingMode(), since it seems to be trying to reject anything that isn't r+i or r+r, but it has no default case for scales other than 0, 1 or 2. Implementing the hook for z means that z can no longer test any change there though. llvm-svn: 187497
2013-07-31 20:58:26 +08:00
; Test that strength reduction is applied to addresses with a scale factor,
; but that indexed addressing can still be used.
define void @f1(i32 *%dest, i32 %a) {
[SystemZ] Use BRCT and BRCTG to eliminate add-&-compare sequences This patch just uses a peephole test for "add; compare; branch" sequences within a single block. The IR optimizers already convert loops to decrement-and-branch-on-nonzero form in some cases, so even this simplistic test triggers many times during a clang bootstrap and projects/test-suite run. It looks like there are still cases where we need to more strongly prefer branches on nonzero though. E.g. I saw a case where a loop that started out with a check for 0 ended up with a check for -1. I'll try to look at that sometime. I ended up adding the Reference class because MachineInstr::readsRegister() doesn't check for subregisters (by design, as far as I could tell). llvm-svn: 187723
2013-08-05 19:23:46 +08:00
; CHECK-LABEL: f1:
[SystemZ] Implement isLegalAddressingMode() The loop optimizers were assuming that scales > 1 were OK. I think this is actually a bug in TargetLoweringBase::isLegalAddressingMode(), since it seems to be trying to reject anything that isn't r+i or r+r, but it has no default case for scales other than 0, 1 or 2. Implementing the hook for z means that z can no longer test any change there though. llvm-svn: 187497
2013-07-31 20:58:26 +08:00
; CHECK-NOT: sllg
Reapply fix PR23384 (part 3 of 3) r304824 (was reverted in r305720). The root cause of reverting was fixed - PR33514. Summary: The patch makes instruction count the highest priority for LSR solution for X86 (previously registers had highest priority). Reviewers: qcolombet Differential Revision: http://reviews.llvm.org/D30562 From: Evgeny Stupachenko <evstupac@gmail.com> <evgeny.v.stupachenko@intel.com> llvm-svn: 310289
2017-08-08 03:56:34 +08:00
; CHECK: st %r3, 400({{%r[1-5],%r[1-5]}})
[SystemZ] Implement isLegalAddressingMode() The loop optimizers were assuming that scales > 1 were OK. I think this is actually a bug in TargetLoweringBase::isLegalAddressingMode(), since it seems to be trying to reject anything that isn't r+i or r+r, but it has no default case for scales other than 0, 1 or 2. Implementing the hook for z means that z can no longer test any change there though. llvm-svn: 187497
2013-07-31 20:58:26 +08:00
; CHECK: br %r14
entry:
br label %loop
loop:
%index = phi i64 [ 0, %entry ], [ %next, %loop ]
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%ptr = getelementptr i32, i32 *%dest, i64 %index
[SystemZ] Implement isLegalAddressingMode() The loop optimizers were assuming that scales > 1 were OK. I think this is actually a bug in TargetLoweringBase::isLegalAddressingMode(), since it seems to be trying to reject anything that isn't r+i or r+r, but it has no default case for scales other than 0, 1 or 2. Implementing the hook for z means that z can no longer test any change there though. llvm-svn: 187497
2013-07-31 20:58:26 +08:00
store i32 %a, i32 *%ptr
%next = add i64 %index, 1
%cmp = icmp ne i64 %next, 100
br i1 %cmp, label %loop, label %exit
exit:
ret void
}
[SystemZ] Use BRCT and BRCTG to eliminate add-&-compare sequences This patch just uses a peephole test for "add; compare; branch" sequences within a single block. The IR optimizers already convert loops to decrement-and-branch-on-nonzero form in some cases, so even this simplistic test triggers many times during a clang bootstrap and projects/test-suite run. It looks like there are still cases where we need to more strongly prefer branches on nonzero though. E.g. I saw a case where a loop that started out with a check for 0 ended up with a check for -1. I'll try to look at that sometime. I ended up adding the Reference class because MachineInstr::readsRegister() doesn't check for subregisters (by design, as far as I could tell). llvm-svn: 187723
2013-08-05 19:23:46 +08:00
; Test a loop that should be converted into dbr form and then use BRCT.
define void @f2(i32 *%src, i32 *%dest) {
; CHECK-LABEL: f2:
; CHECK: lhi [[REG:%r[0-5]]], 100
; CHECK: [[LABEL:\.[^:]*]]:{{.*}} %loop
; CHECK: brct [[REG]], [[LABEL]]
; CHECK: br %r14
entry:
br label %loop
loop:
%count = phi i32 [ 0, %entry ], [ %next, %loop.next ]
%next = add i32 %count, 1
[SystemZ] Test case formatting fixes Fix systematically wrong whitespace from a prior automated change. NFC. llvm-svn: 337542
2018-07-20 20:12:10 +08:00
%val = load volatile i32, i32 *%src
[SystemZ] Use BRCT and BRCTG to eliminate add-&-compare sequences This patch just uses a peephole test for "add; compare; branch" sequences within a single block. The IR optimizers already convert loops to decrement-and-branch-on-nonzero form in some cases, so even this simplistic test triggers many times during a clang bootstrap and projects/test-suite run. It looks like there are still cases where we need to more strongly prefer branches on nonzero though. E.g. I saw a case where a loop that started out with a check for 0 ended up with a check for -1. I'll try to look at that sometime. I ended up adding the Reference class because MachineInstr::readsRegister() doesn't check for subregisters (by design, as far as I could tell). llvm-svn: 187723
2013-08-05 19:23:46 +08:00
%cmp = icmp eq i32 %val, 0
br i1 %cmp, label %loop.next, label %loop.store
loop.store:
%add = add i32 %val, 1
store volatile i32 %add, i32 *%dest
br label %loop.next
loop.next:
%cont = icmp ne i32 %next, 100
br i1 %cont, label %loop, label %exit
exit:
ret void
}
; Like f2, but for BRCTG.
define void @f3(i64 *%src, i64 *%dest) {
; CHECK-LABEL: f3:
; CHECK: lghi [[REG:%r[0-5]]], 100
; CHECK: [[LABEL:\.[^:]*]]:{{.*}} %loop
; CHECK: brctg [[REG]], [[LABEL]]
; CHECK: br %r14
entry:
br label %loop
loop:
%count = phi i64 [ 0, %entry ], [ %next, %loop.next ]
%next = add i64 %count, 1
[SystemZ] Test case formatting fixes Fix systematically wrong whitespace from a prior automated change. NFC. llvm-svn: 337542
2018-07-20 20:12:10 +08:00
%val = load volatile i64, i64 *%src
[SystemZ] Use BRCT and BRCTG to eliminate add-&-compare sequences This patch just uses a peephole test for "add; compare; branch" sequences within a single block. The IR optimizers already convert loops to decrement-and-branch-on-nonzero form in some cases, so even this simplistic test triggers many times during a clang bootstrap and projects/test-suite run. It looks like there are still cases where we need to more strongly prefer branches on nonzero though. E.g. I saw a case where a loop that started out with a check for 0 ended up with a check for -1. I'll try to look at that sometime. I ended up adding the Reference class because MachineInstr::readsRegister() doesn't check for subregisters (by design, as far as I could tell). llvm-svn: 187723
2013-08-05 19:23:46 +08:00
%cmp = icmp eq i64 %val, 0
br i1 %cmp, label %loop.next, label %loop.store
loop.store:
%add = add i64 %val, 1
store volatile i64 %add, i64 *%dest
br label %loop.next
loop.next:
%cont = icmp ne i64 %next, 100
br i1 %cont, label %loop, label %exit
exit:
ret void
}
; Test a loop with a 64-bit decremented counter in which the 32-bit
; low part of the counter is used after the decrement. This is an example
; of a subregister use being the only thing that blocks a conversion to BRCTG.
define void @f4(i32 *%src, i32 *%dest, i64 *%dest2, i64 %count) {
; CHECK-LABEL: f4:
; CHECK: aghi [[REG:%r[0-5]]], -1
; CHECK: lr [[REG2:%r[0-5]]], [[REG]]
; CHECK: stg [[REG2]],
; CHECK: jne {{\..*}}
; CHECK: br %r14
entry:
br label %loop
loop:
%left = phi i64 [ %count, %entry ], [ %next, %loop.next ]
store volatile i64 %left, i64 *%dest2
[SystemZ] Test case formatting fixes Fix systematically wrong whitespace from a prior automated change. NFC. llvm-svn: 337542
2018-07-20 20:12:10 +08:00
%val = load volatile i32, i32 *%src
[SystemZ] Use BRCT and BRCTG to eliminate add-&-compare sequences This patch just uses a peephole test for "add; compare; branch" sequences within a single block. The IR optimizers already convert loops to decrement-and-branch-on-nonzero form in some cases, so even this simplistic test triggers many times during a clang bootstrap and projects/test-suite run. It looks like there are still cases where we need to more strongly prefer branches on nonzero though. E.g. I saw a case where a loop that started out with a check for 0 ended up with a check for -1. I'll try to look at that sometime. I ended up adding the Reference class because MachineInstr::readsRegister() doesn't check for subregisters (by design, as far as I could tell). llvm-svn: 187723
2013-08-05 19:23:46 +08:00
%cmp = icmp eq i32 %val, 0
br i1 %cmp, label %loop.next, label %loop.store
loop.store:
%add = add i32 %val, 1
store volatile i32 %add, i32 *%dest
br label %loop.next
loop.next:
%next = add i64 %left, -1
%ext = zext i32 %val to i64
%shl = shl i64 %ext, 32
%and = and i64 %next, 4294967295
%or = or i64 %shl, %and
store volatile i64 %or, i64 *%dest2
%cont = icmp ne i64 %next, 0
br i1 %cont, label %loop, label %exit
exit:
ret void
}
[LoopStrenghtReduce] Refactoring and addition of a new target cost function. Refactored so that a LSRUse owns its fixups, as oppsed to letting the LSRInstance own them. This makes it easier to rate formulas for LSRUses, since the fixups are available directly. The Offsets vector has been removed since it was no longer necessary. New target hook isFoldableMemAccessOffset(), which is used during formula rating. For SystemZ, this is useful to express that loads and stores with float or vector types with a big/negative offset should be avoided in loops. Without this, LSR will generate a lot of negative offsets that would require extra instructions for loading the address. Updated tests: test/CodeGen/SystemZ/loop-01.ll Reviewed by: Quentin Colombet and Ulrich Weigand. https://reviews.llvm.org/D19152 llvm-svn: 278927
2016-08-17 21:24:19 +08:00
; Test that negative offsets are avoided for loads of floating point.
%s.float = type { float, float, float }
define void @f5(%s.float* nocapture %a,
%s.float* nocapture readonly %b,
i32 zeroext %S) {
; CHECK-Z13-LABEL: f5:
; CHECK-Z13-NOT: -{{[0-9]+}}(%r
entry:
%cmp9 = icmp eq i32 %S, 0
br i1 %cmp9, label %for.cond.cleanup, label %for.body.preheader
for.body.preheader: ; preds = %entry
br label %for.body
for.cond.cleanup.loopexit: ; preds = %for.body
br label %for.cond.cleanup
for.cond.cleanup: ; preds = %for.cond.cleanup.loopexit, %entry
ret void
for.body: ; preds = %for.body.preheader, %for.body
%indvars.iv = phi i64 [ %indvars.iv.next, %for.body ], [ 0, %for.body.preheader ]
%a1 = getelementptr inbounds %s.float, %s.float* %b, i64 %indvars.iv, i32 0
%tmp = load float, float* %a1, align 4
%b4 = getelementptr inbounds %s.float, %s.float* %b, i64 %indvars.iv, i32 1
%tmp1 = load float, float* %b4, align 4
%add = fadd float %tmp, %tmp1
%c = getelementptr inbounds %s.float, %s.float* %b, i64 %indvars.iv, i32 2
%tmp2 = load float, float* %c, align 4
%add7 = fadd float %add, %tmp2
%a10 = getelementptr inbounds %s.float, %s.float* %a, i64 %indvars.iv, i32 0
store float %add7, float* %a10, align 4
%indvars.iv.next = add nuw nsw i64 %indvars.iv, 1
%lftr.wideiv = trunc i64 %indvars.iv.next to i32
%exitcond = icmp eq i32 %lftr.wideiv, %S
br i1 %exitcond, label %for.cond.cleanup.loopexit, label %for.body
}
; Test that negative offsets are avoided for loads of double.
%s.double = type { double, double, double }
define void @f6(%s.double* nocapture %a,
%s.double* nocapture readonly %b,
i32 zeroext %S) {
; CHECK-Z13-LABEL: f6:
; CHECK-Z13-NOT: -{{[0-9]+}}(%r
entry:
%cmp9 = icmp eq i32 %S, 0
br i1 %cmp9, label %for.cond.cleanup, label %for.body.preheader
for.body.preheader: ; preds = %entry
br label %for.body
for.cond.cleanup.loopexit: ; preds = %for.body
br label %for.cond.cleanup
for.cond.cleanup: ; preds = %for.cond.cleanup.loopexit, %entry
ret void
for.body: ; preds = %for.body.preheader, %for.body
%indvars.iv = phi i64 [ %indvars.iv.next, %for.body ], [ 0, %for.body.preheader ]
%a1 = getelementptr inbounds %s.double, %s.double* %b, i64 %indvars.iv, i32 0
%tmp = load double, double* %a1, align 4
%b4 = getelementptr inbounds %s.double, %s.double* %b, i64 %indvars.iv, i32 1
%tmp1 = load double, double* %b4, align 4
%add = fadd double %tmp, %tmp1
%c = getelementptr inbounds %s.double, %s.double* %b, i64 %indvars.iv, i32 2
%tmp2 = load double, double* %c, align 4
%add7 = fadd double %add, %tmp2
%a10 = getelementptr inbounds %s.double, %s.double* %a, i64 %indvars.iv, i32 0
store double %add7, double* %a10, align 4
%indvars.iv.next = add nuw nsw i64 %indvars.iv, 1
%lftr.wideiv = trunc i64 %indvars.iv.next to i32
%exitcond = icmp eq i32 %lftr.wideiv, %S
br i1 %exitcond, label %for.cond.cleanup.loopexit, label %for.body
}
; Test that negative offsets are avoided for memory accesses of vector type.
%s.vec = type { <4 x i32>, <4 x i32>, <4 x i32> }
define void @f7(%s.vec* nocapture %a,
%s.vec* nocapture readonly %b,
i32 zeroext %S) {
; CHECK-Z13-LABEL: f7:
; CHECK-Z13-NOT: -{{[0-9]+}}(%r
entry:
%cmp9 = icmp eq i32 %S, 0
br i1 %cmp9, label %for.cond.cleanup, label %for.body.preheader
for.body.preheader: ; preds = %entry
br label %for.body
for.cond.cleanup.loopexit: ; preds = %for.body
br label %for.cond.cleanup
for.cond.cleanup: ; preds = %for.cond.cleanup.loopexit, %entry
ret void
for.body: ; preds = %for.body.preheader, %for.body
%indvars.iv = phi i64 [ %indvars.iv.next, %for.body ], [ 0, %for.body.preheader ]
%a1 = getelementptr inbounds %s.vec, %s.vec* %b, i64 %indvars.iv, i32 0
%tmp = load <4 x i32>, <4 x i32>* %a1, align 4
%b4 = getelementptr inbounds %s.vec, %s.vec* %b, i64 %indvars.iv, i32 1
%tmp1 = load <4 x i32>, <4 x i32>* %b4, align 4
%add = add <4 x i32> %tmp1, %tmp
%c = getelementptr inbounds %s.vec, %s.vec* %b, i64 %indvars.iv, i32 2
%tmp2 = load <4 x i32>, <4 x i32>* %c, align 4
%add7 = add <4 x i32> %add, %tmp2
%a10 = getelementptr inbounds %s.vec, %s.vec* %a, i64 %indvars.iv, i32 0
store <4 x i32> %add7, <4 x i32>* %a10, align 4
%indvars.iv.next = add nuw nsw i64 %indvars.iv, 1
%lftr.wideiv = trunc i64 %indvars.iv.next to i32
%exitcond = icmp eq i32 %lftr.wideiv, %S
br i1 %exitcond, label %for.cond.cleanup.loopexit, label %for.body
}
[SystemZ, LoopStrengthReduce] This patch makes LSR generate better code for SystemZ in the cases of memory intrinsics, Load->Store pairs or comparison of immediate with memory. In order to achieve this, the following common code changes were made: * New TTI hook: LSRWithInstrQueries(), which defaults to false. Controls if LSR should do instruction-based addressing evaluations by calling isLegalAddressingMode() with the Instruction pointers. * In LoopStrengthReduce: handle address operands of memset, memmove and memcpy as address uses, and call isFoldableMemAccessOffset() for any LSRUse::Address, not just loads or stores. SystemZ changes: * isLSRCostLess() implemented with Insns first, and without ImmCost. * New function supportedAddressingMode() that is a helper for TTI methods looking at Instructions passed via pointers. Review: Ulrich Weigand, Quentin Colombet https://reviews.llvm.org/D35262 https://reviews.llvm.org/D35049 llvm-svn: 308729
2017-07-21 19:59:37 +08:00
; Test that a memcpy loop does not get a lot of lays before each mvc (D12 and no index-reg).
%0 = type { %1, %2* }
%1 = type { %2*, %2* }
%2 = type <{ %3, i32, [4 x i8] }>
%3 = type { i16*, i16*, i16* }
Remove alignment argument from memcpy/memmove/memset in favour of alignment attributes (Step 1) Summary: This is a resurrection of work first proposed and discussed in Aug 2015: http://lists.llvm.org/pipermail/llvm-dev/2015-August/089384.html and initially landed (but then backed out) in Nov 2015: http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html The @llvm.memcpy/memmove/memset intrinsics currently have an explicit argument which is required to be a constant integer. It represents the alignment of the dest (and source), and so must be the minimum of the actual alignment of the two. This change is the first in a series that allows source and dest to each have their own alignments by using the alignment attribute on their arguments. In this change we: 1) Remove the alignment argument. 2) Add alignment attributes to the source & dest arguments. We, temporarily, require that the alignments for source & dest be equal. For example, code which used to read: call void @llvm.memcpy.p0i8.p0i8.i32(i8* %dest, i8* %src, i32 100, i32 4, i1 false) will now read call void @llvm.memcpy.p0i8.p0i8.i32(i8* align 4 %dest, i8* align 4 %src, i32 100, i1 false) Downstream users may have to update their lit tests that check for @llvm.memcpy/memmove/memset call/declaration patterns. The following extended sed script may help with updating the majority of your tests, but it does not catch all possible patterns so some manual checking and updating will be required. s~declare void @llvm\.mem(set|cpy|move)\.p([^(]*)\((.*), i32, i1\)~declare void @llvm.mem\1.p\2(\3, i1)~g s~call void @llvm\.memset\.p([^(]*)i8\(i8([^*]*)\* (.*), i8 (.*), i8 (.*), i32 [01], i1 ([^)]*)\)~call void @llvm.memset.p\1i8(i8\2* \3, i8 \4, i8 \5, i1 \6)~g s~call void @llvm\.memset\.p([^(]*)i16\(i8([^*]*)\* (.*), i8 (.*), i16 (.*), i32 [01], i1 ([^)]*)\)~call void @llvm.memset.p\1i16(i8\2* \3, i8 \4, i16 \5, i1 \6)~g s~call void @llvm\.memset\.p([^(]*)i32\(i8([^*]*)\* (.*), i8 (.*), i32 (.*), i32 [01], i1 ([^)]*)\)~call void @llvm.memset.p\1i32(i8\2* \3, i8 \4, i32 \5, i1 \6)~g s~call void @llvm\.memset\.p([^(]*)i64\(i8([^*]*)\* (.*), i8 (.*), i64 (.*), i32 [01], i1 ([^)]*)\)~call void @llvm.memset.p\1i64(i8\2* \3, i8 \4, i64 \5, i1 \6)~g s~call void @llvm\.memset\.p([^(]*)i128\(i8([^*]*)\* (.*), i8 (.*), i128 (.*), i32 [01], i1 ([^)]*)\)~call void @llvm.memset.p\1i128(i8\2* \3, i8 \4, i128 \5, i1 \6)~g s~call void @llvm\.memset\.p([^(]*)i8\(i8([^*]*)\* (.*), i8 (.*), i8 (.*), i32 ([0-9]*), i1 ([^)]*)\)~call void @llvm.memset.p\1i8(i8\2* align \6 \3, i8 \4, i8 \5, i1 \7)~g s~call void @llvm\.memset\.p([^(]*)i16\(i8([^*]*)\* (.*), i8 (.*), i16 (.*), i32 ([0-9]*), i1 ([^)]*)\)~call void @llvm.memset.p\1i16(i8\2* align \6 \3, i8 \4, i16 \5, i1 \7)~g s~call void @llvm\.memset\.p([^(]*)i32\(i8([^*]*)\* (.*), i8 (.*), i32 (.*), i32 ([0-9]*), i1 ([^)]*)\)~call void @llvm.memset.p\1i32(i8\2* align \6 \3, i8 \4, i32 \5, i1 \7)~g s~call void @llvm\.memset\.p([^(]*)i64\(i8([^*]*)\* (.*), i8 (.*), i64 (.*), i32 ([0-9]*), i1 ([^)]*)\)~call void @llvm.memset.p\1i64(i8\2* align \6 \3, i8 \4, i64 \5, i1 \7)~g s~call void @llvm\.memset\.p([^(]*)i128\(i8([^*]*)\* (.*), i8 (.*), i128 (.*), i32 ([0-9]*), i1 ([^)]*)\)~call void @llvm.memset.p\1i128(i8\2* align \6 \3, i8 \4, i128 \5, i1 \7)~g s~call void @llvm\.mem(cpy|move)\.p([^(]*)i8\(i8([^*]*)\* (.*), i8([^*]*)\* (.*), i8 (.*), i32 [01], i1 ([^)]*)\)~call void @llvm.mem\1.p\2i8(i8\3* \4, i8\5* \6, i8 \7, i1 \8)~g s~call void @llvm\.mem(cpy|move)\.p([^(]*)i16\(i8([^*]*)\* (.*), i8([^*]*)\* (.*), i16 (.*), i32 [01], i1 ([^)]*)\)~call void @llvm.mem\1.p\2i16(i8\3* \4, i8\5* \6, i16 \7, i1 \8)~g s~call void @llvm\.mem(cpy|move)\.p([^(]*)i32\(i8([^*]*)\* (.*), i8([^*]*)\* (.*), i32 (.*), i32 [01], i1 ([^)]*)\)~call void @llvm.mem\1.p\2i32(i8\3* \4, i8\5* \6, i32 \7, i1 \8)~g s~call void @llvm\.mem(cpy|move)\.p([^(]*)i64\(i8([^*]*)\* (.*), i8([^*]*)\* (.*), i64 (.*), i32 [01], i1 ([^)]*)\)~call void @llvm.mem\1.p\2i64(i8\3* \4, i8\5* \6, i64 \7, i1 \8)~g s~call void @llvm\.mem(cpy|move)\.p([^(]*)i128\(i8([^*]*)\* (.*), i8([^*]*)\* (.*), i128 (.*), i32 [01], i1 ([^)]*)\)~call void @llvm.mem\1.p\2i128(i8\3* \4, i8\5* \6, i128 \7, i1 \8)~g s~call void @llvm\.mem(cpy|move)\.p([^(]*)i8\(i8([^*]*)\* (.*), i8([^*]*)\* (.*), i8 (.*), i32 ([0-9]*), i1 ([^)]*)\)~call void @llvm.mem\1.p\2i8(i8\3* align \8 \4, i8\5* align \8 \6, i8 \7, i1 \9)~g s~call void @llvm\.mem(cpy|move)\.p([^(]*)i16\(i8([^*]*)\* (.*), i8([^*]*)\* (.*), i16 (.*), i32 ([0-9]*), i1 ([^)]*)\)~call void @llvm.mem\1.p\2i16(i8\3* align \8 \4, i8\5* align \8 \6, i16 \7, i1 \9)~g s~call void @llvm\.mem(cpy|move)\.p([^(]*)i32\(i8([^*]*)\* (.*), i8([^*]*)\* (.*), i32 (.*), i32 ([0-9]*), i1 ([^)]*)\)~call void @llvm.mem\1.p\2i32(i8\3* align \8 \4, i8\5* align \8 \6, i32 \7, i1 \9)~g s~call void @llvm\.mem(cpy|move)\.p([^(]*)i64\(i8([^*]*)\* (.*), i8([^*]*)\* (.*), i64 (.*), i32 ([0-9]*), i1 ([^)]*)\)~call void @llvm.mem\1.p\2i64(i8\3* align \8 \4, i8\5* align \8 \6, i64 \7, i1 \9)~g s~call void @llvm\.mem(cpy|move)\.p([^(]*)i128\(i8([^*]*)\* (.*), i8([^*]*)\* (.*), i128 (.*), i32 ([0-9]*), i1 ([^)]*)\)~call void @llvm.mem\1.p\2i128(i8\3* align \8 \4, i8\5* align \8 \6, i128 \7, i1 \9)~g The remaining changes in the series will: Step 2) Expand the IRBuilder API to allow creation of memcpy/memmove with differing source and dest alignments. Step 3) Update Clang to use the new IRBuilder API. Step 4) Update Polly to use the new IRBuilder API. Step 5) Update LLVM passes that create memcpy/memmove calls to use the new IRBuilder API, and those that use use MemIntrinsicInst::[get|set]Alignment() to use getDestAlignment() and getSourceAlignment() instead. Step 6) Remove the single-alignment IRBuilder API for memcpy/memmove, and the MemIntrinsicInst::[get|set]Alignment() methods. Reviewers: pete, hfinkel, lhames, reames, bollu Reviewed By: reames Subscribers: niosHD, reames, jholewinski, qcolombet, jfb, sanjoy, arsenm, dschuff, dylanmckay, mehdi_amini, sdardis, nemanjai, david2050, nhaehnle, javed.absar, sbc100, jgravelle-google, eraman, aheejin, kbarton, JDevlieghere, asb, rbar, johnrusso, simoncook, jordy.potman.lists, apazos, sabuasal, llvm-commits Differential Revision: https://reviews.llvm.org/D41675 llvm-svn: 322965
2018-01-20 01:13:12 +08:00
declare void @llvm.memcpy.p0i8.p0i8.i64(i8* nocapture writeonly, i8* nocapture readonly, i64, i1) #0
[SystemZ, LoopStrengthReduce] This patch makes LSR generate better code for SystemZ in the cases of memory intrinsics, Load->Store pairs or comparison of immediate with memory. In order to achieve this, the following common code changes were made: * New TTI hook: LSRWithInstrQueries(), which defaults to false. Controls if LSR should do instruction-based addressing evaluations by calling isLegalAddressingMode() with the Instruction pointers. * In LoopStrengthReduce: handle address operands of memset, memmove and memcpy as address uses, and call isFoldableMemAccessOffset() for any LSRUse::Address, not just loads or stores. SystemZ changes: * isLSRCostLess() implemented with Insns first, and without ImmCost. * New function supportedAddressingMode() that is a helper for TTI methods looking at Instructions passed via pointers. Review: Ulrich Weigand, Quentin Colombet https://reviews.llvm.org/D35262 https://reviews.llvm.org/D35049 llvm-svn: 308729
2017-07-21 19:59:37 +08:00
define void @f8() {
; CHECK-Z13-LABEL: f8:
; CHECK-Z13: mvc
; CHECK-Z13-NEXT: mvc
; CHECK-Z13-NEXT: mvc
; CHECK-Z13-NEXT: mvc
bb:
%tmp = load %0*, %0** undef, align 8
br i1 undef, label %bb2, label %bb1
bb1: ; preds = %bb
br label %bb2
bb2: ; preds = %bb1, %bb
%tmp3 = phi %0* [ %tmp, %bb ], [ undef, %bb1 ]
%tmp4 = phi %0* [ undef, %bb ], [ undef, %bb1 ]
br label %bb5
bb5: ; preds = %bb5, %bb2
%tmp6 = phi %0* [ %tmp21, %bb5 ], [ %tmp3, %bb2 ]
%tmp7 = phi %0* [ %tmp20, %bb5 ], [ %tmp4, %bb2 ]
%tmp8 = getelementptr inbounds %0, %0* %tmp7, i64 -1
%tmp9 = getelementptr inbounds %0, %0* %tmp6, i64 -1
%tmp10 = bitcast %0* %tmp9 to i8*
%tmp11 = bitcast %0* %tmp8 to i8*
Remove alignment argument from memcpy/memmove/memset in favour of alignment attributes (Step 1) Summary: This is a resurrection of work first proposed and discussed in Aug 2015: http://lists.llvm.org/pipermail/llvm-dev/2015-August/089384.html and initially landed (but then backed out) in Nov 2015: http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html The @llvm.memcpy/memmove/memset intrinsics currently have an explicit argument which is required to be a constant integer. It represents the alignment of the dest (and source), and so must be the minimum of the actual alignment of the two. This change is the first in a series that allows source and dest to each have their own alignments by using the alignment attribute on their arguments. In this change we: 1) Remove the alignment argument. 2) Add alignment attributes to the source & dest arguments. We, temporarily, require that the alignments for source & dest be equal. For example, code which used to read: call void @llvm.memcpy.p0i8.p0i8.i32(i8* %dest, i8* %src, i32 100, i32 4, i1 false) will now read call void @llvm.memcpy.p0i8.p0i8.i32(i8* align 4 %dest, i8* align 4 %src, i32 100, i1 false) Downstream users may have to update their lit tests that check for @llvm.memcpy/memmove/memset call/declaration patterns. The following extended sed script may help with updating the majority of your tests, but it does not catch all possible patterns so some manual checking and updating will be required. s~declare void @llvm\.mem(set|cpy|move)\.p([^(]*)\((.*), i32, i1\)~declare void @llvm.mem\1.p\2(\3, i1)~g s~call void @llvm\.memset\.p([^(]*)i8\(i8([^*]*)\* (.*), i8 (.*), i8 (.*), i32 [01], i1 ([^)]*)\)~call void @llvm.memset.p\1i8(i8\2* \3, i8 \4, i8 \5, i1 \6)~g s~call void @llvm\.memset\.p([^(]*)i16\(i8([^*]*)\* (.*), i8 (.*), i16 (.*), i32 [01], i1 ([^)]*)\)~call void @llvm.memset.p\1i16(i8\2* \3, i8 \4, i16 \5, i1 \6)~g s~call void @llvm\.memset\.p([^(]*)i32\(i8([^*]*)\* (.*), i8 (.*), i32 (.*), i32 [01], i1 ([^)]*)\)~call void @llvm.memset.p\1i32(i8\2* \3, i8 \4, i32 \5, i1 \6)~g s~call void @llvm\.memset\.p([^(]*)i64\(i8([^*]*)\* (.*), i8 (.*), i64 (.*), i32 [01], i1 ([^)]*)\)~call void @llvm.memset.p\1i64(i8\2* \3, i8 \4, i64 \5, i1 \6)~g s~call void @llvm\.memset\.p([^(]*)i128\(i8([^*]*)\* (.*), i8 (.*), i128 (.*), i32 [01], i1 ([^)]*)\)~call void @llvm.memset.p\1i128(i8\2* \3, i8 \4, i128 \5, i1 \6)~g s~call void @llvm\.memset\.p([^(]*)i8\(i8([^*]*)\* (.*), i8 (.*), i8 (.*), i32 ([0-9]*), i1 ([^)]*)\)~call void @llvm.memset.p\1i8(i8\2* align \6 \3, i8 \4, i8 \5, i1 \7)~g s~call void @llvm\.memset\.p([^(]*)i16\(i8([^*]*)\* (.*), i8 (.*), i16 (.*), i32 ([0-9]*), i1 ([^)]*)\)~call void @llvm.memset.p\1i16(i8\2* align \6 \3, i8 \4, i16 \5, i1 \7)~g s~call void @llvm\.memset\.p([^(]*)i32\(i8([^*]*)\* (.*), i8 (.*), i32 (.*), i32 ([0-9]*), i1 ([^)]*)\)~call void @llvm.memset.p\1i32(i8\2* align \6 \3, i8 \4, i32 \5, i1 \7)~g s~call void @llvm\.memset\.p([^(]*)i64\(i8([^*]*)\* (.*), i8 (.*), i64 (.*), i32 ([0-9]*), i1 ([^)]*)\)~call void @llvm.memset.p\1i64(i8\2* align \6 \3, i8 \4, i64 \5, i1 \7)~g s~call void @llvm\.memset\.p([^(]*)i128\(i8([^*]*)\* (.*), i8 (.*), i128 (.*), i32 ([0-9]*), i1 ([^)]*)\)~call void @llvm.memset.p\1i128(i8\2* align \6 \3, i8 \4, i128 \5, i1 \7)~g s~call void @llvm\.mem(cpy|move)\.p([^(]*)i8\(i8([^*]*)\* (.*), i8([^*]*)\* (.*), i8 (.*), i32 [01], i1 ([^)]*)\)~call void @llvm.mem\1.p\2i8(i8\3* \4, i8\5* \6, i8 \7, i1 \8)~g s~call void @llvm\.mem(cpy|move)\.p([^(]*)i16\(i8([^*]*)\* (.*), i8([^*]*)\* (.*), i16 (.*), i32 [01], i1 ([^)]*)\)~call void @llvm.mem\1.p\2i16(i8\3* \4, i8\5* \6, i16 \7, i1 \8)~g s~call void @llvm\.mem(cpy|move)\.p([^(]*)i32\(i8([^*]*)\* (.*), i8([^*]*)\* (.*), i32 (.*), i32 [01], i1 ([^)]*)\)~call void @llvm.mem\1.p\2i32(i8\3* \4, i8\5* \6, i32 \7, i1 \8)~g s~call void @llvm\.mem(cpy|move)\.p([^(]*)i64\(i8([^*]*)\* (.*), i8([^*]*)\* (.*), i64 (.*), i32 [01], i1 ([^)]*)\)~call void @llvm.mem\1.p\2i64(i8\3* \4, i8\5* \6, i64 \7, i1 \8)~g s~call void @llvm\.mem(cpy|move)\.p([^(]*)i128\(i8([^*]*)\* (.*), i8([^*]*)\* (.*), i128 (.*), i32 [01], i1 ([^)]*)\)~call void @llvm.mem\1.p\2i128(i8\3* \4, i8\5* \6, i128 \7, i1 \8)~g s~call void @llvm\.mem(cpy|move)\.p([^(]*)i8\(i8([^*]*)\* (.*), i8([^*]*)\* (.*), i8 (.*), i32 ([0-9]*), i1 ([^)]*)\)~call void @llvm.mem\1.p\2i8(i8\3* align \8 \4, i8\5* align \8 \6, i8 \7, i1 \9)~g s~call void @llvm\.mem(cpy|move)\.p([^(]*)i16\(i8([^*]*)\* (.*), i8([^*]*)\* (.*), i16 (.*), i32 ([0-9]*), i1 ([^)]*)\)~call void @llvm.mem\1.p\2i16(i8\3* align \8 \4, i8\5* align \8 \6, i16 \7, i1 \9)~g s~call void @llvm\.mem(cpy|move)\.p([^(]*)i32\(i8([^*]*)\* (.*), i8([^*]*)\* (.*), i32 (.*), i32 ([0-9]*), i1 ([^)]*)\)~call void @llvm.mem\1.p\2i32(i8\3* align \8 \4, i8\5* align \8 \6, i32 \7, i1 \9)~g s~call void @llvm\.mem(cpy|move)\.p([^(]*)i64\(i8([^*]*)\* (.*), i8([^*]*)\* (.*), i64 (.*), i32 ([0-9]*), i1 ([^)]*)\)~call void @llvm.mem\1.p\2i64(i8\3* align \8 \4, i8\5* align \8 \6, i64 \7, i1 \9)~g s~call void @llvm\.mem(cpy|move)\.p([^(]*)i128\(i8([^*]*)\* (.*), i8([^*]*)\* (.*), i128 (.*), i32 ([0-9]*), i1 ([^)]*)\)~call void @llvm.mem\1.p\2i128(i8\3* align \8 \4, i8\5* align \8 \6, i128 \7, i1 \9)~g The remaining changes in the series will: Step 2) Expand the IRBuilder API to allow creation of memcpy/memmove with differing source and dest alignments. Step 3) Update Clang to use the new IRBuilder API. Step 4) Update Polly to use the new IRBuilder API. Step 5) Update LLVM passes that create memcpy/memmove calls to use the new IRBuilder API, and those that use use MemIntrinsicInst::[get|set]Alignment() to use getDestAlignment() and getSourceAlignment() instead. Step 6) Remove the single-alignment IRBuilder API for memcpy/memmove, and the MemIntrinsicInst::[get|set]Alignment() methods. Reviewers: pete, hfinkel, lhames, reames, bollu Reviewed By: reames Subscribers: niosHD, reames, jholewinski, qcolombet, jfb, sanjoy, arsenm, dschuff, dylanmckay, mehdi_amini, sdardis, nemanjai, david2050, nhaehnle, javed.absar, sbc100, jgravelle-google, eraman, aheejin, kbarton, JDevlieghere, asb, rbar, johnrusso, simoncook, jordy.potman.lists, apazos, sabuasal, llvm-commits Differential Revision: https://reviews.llvm.org/D41675 llvm-svn: 322965
2018-01-20 01:13:12 +08:00
tail call void @llvm.memcpy.p0i8.p0i8.i64(i8* align 8 %tmp10, i8* align 8 %tmp11, i64 24, i1 false)
[SystemZ, LoopStrengthReduce] This patch makes LSR generate better code for SystemZ in the cases of memory intrinsics, Load->Store pairs or comparison of immediate with memory. In order to achieve this, the following common code changes were made: * New TTI hook: LSRWithInstrQueries(), which defaults to false. Controls if LSR should do instruction-based addressing evaluations by calling isLegalAddressingMode() with the Instruction pointers. * In LoopStrengthReduce: handle address operands of memset, memmove and memcpy as address uses, and call isFoldableMemAccessOffset() for any LSRUse::Address, not just loads or stores. SystemZ changes: * isLSRCostLess() implemented with Insns first, and without ImmCost. * New function supportedAddressingMode() that is a helper for TTI methods looking at Instructions passed via pointers. Review: Ulrich Weigand, Quentin Colombet https://reviews.llvm.org/D35262 https://reviews.llvm.org/D35049 llvm-svn: 308729
2017-07-21 19:59:37 +08:00
%tmp12 = getelementptr inbounds %0, %0* %tmp7, i64 -2
%tmp13 = getelementptr inbounds %0, %0* %tmp6, i64 -2
%tmp14 = bitcast %0* %tmp13 to i8*
%tmp15 = bitcast %0* %tmp12 to i8*
Remove alignment argument from memcpy/memmove/memset in favour of alignment attributes (Step 1) Summary: This is a resurrection of work first proposed and discussed in Aug 2015: http://lists.llvm.org/pipermail/llvm-dev/2015-August/089384.html and initially landed (but then backed out) in Nov 2015: http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html The @llvm.memcpy/memmove/memset intrinsics currently have an explicit argument which is required to be a constant integer. It represents the alignment of the dest (and source), and so must be the minimum of the actual alignment of the two. This change is the first in a series that allows source and dest to each have their own alignments by using the alignment attribute on their arguments. In this change we: 1) Remove the alignment argument. 2) Add alignment attributes to the source & dest arguments. We, temporarily, require that the alignments for source & dest be equal. For example, code which used to read: call void @llvm.memcpy.p0i8.p0i8.i32(i8* %dest, i8* %src, i32 100, i32 4, i1 false) will now read call void @llvm.memcpy.p0i8.p0i8.i32(i8* align 4 %dest, i8* align 4 %src, i32 100, i1 false) Downstream users may have to update their lit tests that check for @llvm.memcpy/memmove/memset call/declaration patterns. The following extended sed script may help with updating the majority of your tests, but it does not catch all possible patterns so some manual checking and updating will be required. s~declare void @llvm\.mem(set|cpy|move)\.p([^(]*)\((.*), i32, i1\)~declare void @llvm.mem\1.p\2(\3, i1)~g s~call void @llvm\.memset\.p([^(]*)i8\(i8([^*]*)\* (.*), i8 (.*), i8 (.*), i32 [01], i1 ([^)]*)\)~call void @llvm.memset.p\1i8(i8\2* \3, i8 \4, i8 \5, i1 \6)~g s~call void @llvm\.memset\.p([^(]*)i16\(i8([^*]*)\* (.*), i8 (.*), i16 (.*), i32 [01], i1 ([^)]*)\)~call void @llvm.memset.p\1i16(i8\2* \3, i8 \4, i16 \5, i1 \6)~g s~call void @llvm\.memset\.p([^(]*)i32\(i8([^*]*)\* (.*), i8 (.*), i32 (.*), i32 [01], i1 ([^)]*)\)~call void @llvm.memset.p\1i32(i8\2* \3, i8 \4, i32 \5, i1 \6)~g s~call void @llvm\.memset\.p([^(]*)i64\(i8([^*]*)\* (.*), i8 (.*), i64 (.*), i32 [01], i1 ([^)]*)\)~call void @llvm.memset.p\1i64(i8\2* \3, i8 \4, i64 \5, i1 \6)~g s~call void @llvm\.memset\.p([^(]*)i128\(i8([^*]*)\* (.*), i8 (.*), i128 (.*), i32 [01], i1 ([^)]*)\)~call void @llvm.memset.p\1i128(i8\2* \3, i8 \4, i128 \5, i1 \6)~g s~call void @llvm\.memset\.p([^(]*)i8\(i8([^*]*)\* (.*), i8 (.*), i8 (.*), i32 ([0-9]*), i1 ([^)]*)\)~call void @llvm.memset.p\1i8(i8\2* align \6 \3, i8 \4, i8 \5, i1 \7)~g s~call void @llvm\.memset\.p([^(]*)i16\(i8([^*]*)\* (.*), i8 (.*), i16 (.*), i32 ([0-9]*), i1 ([^)]*)\)~call void @llvm.memset.p\1i16(i8\2* align \6 \3, i8 \4, i16 \5, i1 \7)~g s~call void @llvm\.memset\.p([^(]*)i32\(i8([^*]*)\* (.*), i8 (.*), i32 (.*), i32 ([0-9]*), i1 ([^)]*)\)~call void @llvm.memset.p\1i32(i8\2* align \6 \3, i8 \4, i32 \5, i1 \7)~g s~call void @llvm\.memset\.p([^(]*)i64\(i8([^*]*)\* (.*), i8 (.*), i64 (.*), i32 ([0-9]*), i1 ([^)]*)\)~call void @llvm.memset.p\1i64(i8\2* align \6 \3, i8 \4, i64 \5, i1 \7)~g s~call void @llvm\.memset\.p([^(]*)i128\(i8([^*]*)\* (.*), i8 (.*), i128 (.*), i32 ([0-9]*), i1 ([^)]*)\)~call void @llvm.memset.p\1i128(i8\2* align \6 \3, i8 \4, i128 \5, i1 \7)~g s~call void @llvm\.mem(cpy|move)\.p([^(]*)i8\(i8([^*]*)\* (.*), i8([^*]*)\* (.*), i8 (.*), i32 [01], i1 ([^)]*)\)~call void @llvm.mem\1.p\2i8(i8\3* \4, i8\5* \6, i8 \7, i1 \8)~g s~call void @llvm\.mem(cpy|move)\.p([^(]*)i16\(i8([^*]*)\* (.*), i8([^*]*)\* (.*), i16 (.*), i32 [01], i1 ([^)]*)\)~call void @llvm.mem\1.p\2i16(i8\3* \4, i8\5* \6, i16 \7, i1 \8)~g s~call void @llvm\.mem(cpy|move)\.p([^(]*)i32\(i8([^*]*)\* (.*), i8([^*]*)\* (.*), i32 (.*), i32 [01], i1 ([^)]*)\)~call void @llvm.mem\1.p\2i32(i8\3* \4, i8\5* \6, i32 \7, i1 \8)~g s~call void @llvm\.mem(cpy|move)\.p([^(]*)i64\(i8([^*]*)\* (.*), i8([^*]*)\* (.*), i64 (.*), i32 [01], i1 ([^)]*)\)~call void @llvm.mem\1.p\2i64(i8\3* \4, i8\5* \6, i64 \7, i1 \8)~g s~call void @llvm\.mem(cpy|move)\.p([^(]*)i128\(i8([^*]*)\* (.*), i8([^*]*)\* (.*), i128 (.*), i32 [01], i1 ([^)]*)\)~call void @llvm.mem\1.p\2i128(i8\3* \4, i8\5* \6, i128 \7, i1 \8)~g s~call void @llvm\.mem(cpy|move)\.p([^(]*)i8\(i8([^*]*)\* (.*), i8([^*]*)\* (.*), i8 (.*), i32 ([0-9]*), i1 ([^)]*)\)~call void @llvm.mem\1.p\2i8(i8\3* align \8 \4, i8\5* align \8 \6, i8 \7, i1 \9)~g s~call void @llvm\.mem(cpy|move)\.p([^(]*)i16\(i8([^*]*)\* (.*), i8([^*]*)\* (.*), i16 (.*), i32 ([0-9]*), i1 ([^)]*)\)~call void @llvm.mem\1.p\2i16(i8\3* align \8 \4, i8\5* align \8 \6, i16 \7, i1 \9)~g s~call void @llvm\.mem(cpy|move)\.p([^(]*)i32\(i8([^*]*)\* (.*), i8([^*]*)\* (.*), i32 (.*), i32 ([0-9]*), i1 ([^)]*)\)~call void @llvm.mem\1.p\2i32(i8\3* align \8 \4, i8\5* align \8 \6, i32 \7, i1 \9)~g s~call void @llvm\.mem(cpy|move)\.p([^(]*)i64\(i8([^*]*)\* (.*), i8([^*]*)\* (.*), i64 (.*), i32 ([0-9]*), i1 ([^)]*)\)~call void @llvm.mem\1.p\2i64(i8\3* align \8 \4, i8\5* align \8 \6, i64 \7, i1 \9)~g s~call void @llvm\.mem(cpy|move)\.p([^(]*)i128\(i8([^*]*)\* (.*), i8([^*]*)\* (.*), i128 (.*), i32 ([0-9]*), i1 ([^)]*)\)~call void @llvm.mem\1.p\2i128(i8\3* align \8 \4, i8\5* align \8 \6, i128 \7, i1 \9)~g The remaining changes in the series will: Step 2) Expand the IRBuilder API to allow creation of memcpy/memmove with differing source and dest alignments. Step 3) Update Clang to use the new IRBuilder API. Step 4) Update Polly to use the new IRBuilder API. Step 5) Update LLVM passes that create memcpy/memmove calls to use the new IRBuilder API, and those that use use MemIntrinsicInst::[get|set]Alignment() to use getDestAlignment() and getSourceAlignment() instead. Step 6) Remove the single-alignment IRBuilder API for memcpy/memmove, and the MemIntrinsicInst::[get|set]Alignment() methods. Reviewers: pete, hfinkel, lhames, reames, bollu Reviewed By: reames Subscribers: niosHD, reames, jholewinski, qcolombet, jfb, sanjoy, arsenm, dschuff, dylanmckay, mehdi_amini, sdardis, nemanjai, david2050, nhaehnle, javed.absar, sbc100, jgravelle-google, eraman, aheejin, kbarton, JDevlieghere, asb, rbar, johnrusso, simoncook, jordy.potman.lists, apazos, sabuasal, llvm-commits Differential Revision: https://reviews.llvm.org/D41675 llvm-svn: 322965
2018-01-20 01:13:12 +08:00
tail call void @llvm.memcpy.p0i8.p0i8.i64(i8* align 8 %tmp14, i8* align 8 %tmp15, i64 24, i1 false)
[SystemZ, LoopStrengthReduce] This patch makes LSR generate better code for SystemZ in the cases of memory intrinsics, Load->Store pairs or comparison of immediate with memory. In order to achieve this, the following common code changes were made: * New TTI hook: LSRWithInstrQueries(), which defaults to false. Controls if LSR should do instruction-based addressing evaluations by calling isLegalAddressingMode() with the Instruction pointers. * In LoopStrengthReduce: handle address operands of memset, memmove and memcpy as address uses, and call isFoldableMemAccessOffset() for any LSRUse::Address, not just loads or stores. SystemZ changes: * isLSRCostLess() implemented with Insns first, and without ImmCost. * New function supportedAddressingMode() that is a helper for TTI methods looking at Instructions passed via pointers. Review: Ulrich Weigand, Quentin Colombet https://reviews.llvm.org/D35262 https://reviews.llvm.org/D35049 llvm-svn: 308729
2017-07-21 19:59:37 +08:00
%tmp16 = getelementptr inbounds %0, %0* %tmp7, i64 -3
%tmp17 = getelementptr inbounds %0, %0* %tmp6, i64 -3
%tmp18 = bitcast %0* %tmp17 to i8*
%tmp19 = bitcast %0* %tmp16 to i8*
Remove alignment argument from memcpy/memmove/memset in favour of alignment attributes (Step 1) Summary: This is a resurrection of work first proposed and discussed in Aug 2015: http://lists.llvm.org/pipermail/llvm-dev/2015-August/089384.html and initially landed (but then backed out) in Nov 2015: http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html The @llvm.memcpy/memmove/memset intrinsics currently have an explicit argument which is required to be a constant integer. It represents the alignment of the dest (and source), and so must be the minimum of the actual alignment of the two. This change is the first in a series that allows source and dest to each have their own alignments by using the alignment attribute on their arguments. In this change we: 1) Remove the alignment argument. 2) Add alignment attributes to the source & dest arguments. We, temporarily, require that the alignments for source & dest be equal. For example, code which used to read: call void @llvm.memcpy.p0i8.p0i8.i32(i8* %dest, i8* %src, i32 100, i32 4, i1 false) will now read call void @llvm.memcpy.p0i8.p0i8.i32(i8* align 4 %dest, i8* align 4 %src, i32 100, i1 false) Downstream users may have to update their lit tests that check for @llvm.memcpy/memmove/memset call/declaration patterns. The following extended sed script may help with updating the majority of your tests, but it does not catch all possible patterns so some manual checking and updating will be required. s~declare void @llvm\.mem(set|cpy|move)\.p([^(]*)\((.*), i32, i1\)~declare void @llvm.mem\1.p\2(\3, i1)~g s~call void @llvm\.memset\.p([^(]*)i8\(i8([^*]*)\* (.*), i8 (.*), i8 (.*), i32 [01], i1 ([^)]*)\)~call void @llvm.memset.p\1i8(i8\2* \3, i8 \4, i8 \5, i1 \6)~g s~call void @llvm\.memset\.p([^(]*)i16\(i8([^*]*)\* (.*), i8 (.*), i16 (.*), i32 [01], i1 ([^)]*)\)~call void @llvm.memset.p\1i16(i8\2* \3, i8 \4, i16 \5, i1 \6)~g s~call void @llvm\.memset\.p([^(]*)i32\(i8([^*]*)\* (.*), i8 (.*), i32 (.*), i32 [01], i1 ([^)]*)\)~call void @llvm.memset.p\1i32(i8\2* \3, i8 \4, i32 \5, i1 \6)~g s~call void @llvm\.memset\.p([^(]*)i64\(i8([^*]*)\* (.*), i8 (.*), i64 (.*), i32 [01], i1 ([^)]*)\)~call void @llvm.memset.p\1i64(i8\2* \3, i8 \4, i64 \5, i1 \6)~g s~call void @llvm\.memset\.p([^(]*)i128\(i8([^*]*)\* (.*), i8 (.*), i128 (.*), i32 [01], i1 ([^)]*)\)~call void @llvm.memset.p\1i128(i8\2* \3, i8 \4, i128 \5, i1 \6)~g s~call void @llvm\.memset\.p([^(]*)i8\(i8([^*]*)\* (.*), i8 (.*), i8 (.*), i32 ([0-9]*), i1 ([^)]*)\)~call void @llvm.memset.p\1i8(i8\2* align \6 \3, i8 \4, i8 \5, i1 \7)~g s~call void @llvm\.memset\.p([^(]*)i16\(i8([^*]*)\* (.*), i8 (.*), i16 (.*), i32 ([0-9]*), i1 ([^)]*)\)~call void @llvm.memset.p\1i16(i8\2* align \6 \3, i8 \4, i16 \5, i1 \7)~g s~call void @llvm\.memset\.p([^(]*)i32\(i8([^*]*)\* (.*), i8 (.*), i32 (.*), i32 ([0-9]*), i1 ([^)]*)\)~call void @llvm.memset.p\1i32(i8\2* align \6 \3, i8 \4, i32 \5, i1 \7)~g s~call void @llvm\.memset\.p([^(]*)i64\(i8([^*]*)\* (.*), i8 (.*), i64 (.*), i32 ([0-9]*), i1 ([^)]*)\)~call void @llvm.memset.p\1i64(i8\2* align \6 \3, i8 \4, i64 \5, i1 \7)~g s~call void @llvm\.memset\.p([^(]*)i128\(i8([^*]*)\* (.*), i8 (.*), i128 (.*), i32 ([0-9]*), i1 ([^)]*)\)~call void @llvm.memset.p\1i128(i8\2* align \6 \3, i8 \4, i128 \5, i1 \7)~g s~call void @llvm\.mem(cpy|move)\.p([^(]*)i8\(i8([^*]*)\* (.*), i8([^*]*)\* (.*), i8 (.*), i32 [01], i1 ([^)]*)\)~call void @llvm.mem\1.p\2i8(i8\3* \4, i8\5* \6, i8 \7, i1 \8)~g s~call void @llvm\.mem(cpy|move)\.p([^(]*)i16\(i8([^*]*)\* (.*), i8([^*]*)\* (.*), i16 (.*), i32 [01], i1 ([^)]*)\)~call void @llvm.mem\1.p\2i16(i8\3* \4, i8\5* \6, i16 \7, i1 \8)~g s~call void @llvm\.mem(cpy|move)\.p([^(]*)i32\(i8([^*]*)\* (.*), i8([^*]*)\* (.*), i32 (.*), i32 [01], i1 ([^)]*)\)~call void @llvm.mem\1.p\2i32(i8\3* \4, i8\5* \6, i32 \7, i1 \8)~g s~call void @llvm\.mem(cpy|move)\.p([^(]*)i64\(i8([^*]*)\* (.*), i8([^*]*)\* (.*), i64 (.*), i32 [01], i1 ([^)]*)\)~call void @llvm.mem\1.p\2i64(i8\3* \4, i8\5* \6, i64 \7, i1 \8)~g s~call void @llvm\.mem(cpy|move)\.p([^(]*)i128\(i8([^*]*)\* (.*), i8([^*]*)\* (.*), i128 (.*), i32 [01], i1 ([^)]*)\)~call void @llvm.mem\1.p\2i128(i8\3* \4, i8\5* \6, i128 \7, i1 \8)~g s~call void @llvm\.mem(cpy|move)\.p([^(]*)i8\(i8([^*]*)\* (.*), i8([^*]*)\* (.*), i8 (.*), i32 ([0-9]*), i1 ([^)]*)\)~call void @llvm.mem\1.p\2i8(i8\3* align \8 \4, i8\5* align \8 \6, i8 \7, i1 \9)~g s~call void @llvm\.mem(cpy|move)\.p([^(]*)i16\(i8([^*]*)\* (.*), i8([^*]*)\* (.*), i16 (.*), i32 ([0-9]*), i1 ([^)]*)\)~call void @llvm.mem\1.p\2i16(i8\3* align \8 \4, i8\5* align \8 \6, i16 \7, i1 \9)~g s~call void @llvm\.mem(cpy|move)\.p([^(]*)i32\(i8([^*]*)\* (.*), i8([^*]*)\* (.*), i32 (.*), i32 ([0-9]*), i1 ([^)]*)\)~call void @llvm.mem\1.p\2i32(i8\3* align \8 \4, i8\5* align \8 \6, i32 \7, i1 \9)~g s~call void @llvm\.mem(cpy|move)\.p([^(]*)i64\(i8([^*]*)\* (.*), i8([^*]*)\* (.*), i64 (.*), i32 ([0-9]*), i1 ([^)]*)\)~call void @llvm.mem\1.p\2i64(i8\3* align \8 \4, i8\5* align \8 \6, i64 \7, i1 \9)~g s~call void @llvm\.mem(cpy|move)\.p([^(]*)i128\(i8([^*]*)\* (.*), i8([^*]*)\* (.*), i128 (.*), i32 ([0-9]*), i1 ([^)]*)\)~call void @llvm.mem\1.p\2i128(i8\3* align \8 \4, i8\5* align \8 \6, i128 \7, i1 \9)~g The remaining changes in the series will: Step 2) Expand the IRBuilder API to allow creation of memcpy/memmove with differing source and dest alignments. Step 3) Update Clang to use the new IRBuilder API. Step 4) Update Polly to use the new IRBuilder API. Step 5) Update LLVM passes that create memcpy/memmove calls to use the new IRBuilder API, and those that use use MemIntrinsicInst::[get|set]Alignment() to use getDestAlignment() and getSourceAlignment() instead. Step 6) Remove the single-alignment IRBuilder API for memcpy/memmove, and the MemIntrinsicInst::[get|set]Alignment() methods. Reviewers: pete, hfinkel, lhames, reames, bollu Reviewed By: reames Subscribers: niosHD, reames, jholewinski, qcolombet, jfb, sanjoy, arsenm, dschuff, dylanmckay, mehdi_amini, sdardis, nemanjai, david2050, nhaehnle, javed.absar, sbc100, jgravelle-google, eraman, aheejin, kbarton, JDevlieghere, asb, rbar, johnrusso, simoncook, jordy.potman.lists, apazos, sabuasal, llvm-commits Differential Revision: https://reviews.llvm.org/D41675 llvm-svn: 322965
2018-01-20 01:13:12 +08:00
tail call void @llvm.memcpy.p0i8.p0i8.i64(i8* align 8 %tmp18, i8* align 8 %tmp19, i64 24, i1 false)
[SystemZ, LoopStrengthReduce] This patch makes LSR generate better code for SystemZ in the cases of memory intrinsics, Load->Store pairs or comparison of immediate with memory. In order to achieve this, the following common code changes were made: * New TTI hook: LSRWithInstrQueries(), which defaults to false. Controls if LSR should do instruction-based addressing evaluations by calling isLegalAddressingMode() with the Instruction pointers. * In LoopStrengthReduce: handle address operands of memset, memmove and memcpy as address uses, and call isFoldableMemAccessOffset() for any LSRUse::Address, not just loads or stores. SystemZ changes: * isLSRCostLess() implemented with Insns first, and without ImmCost. * New function supportedAddressingMode() that is a helper for TTI methods looking at Instructions passed via pointers. Review: Ulrich Weigand, Quentin Colombet https://reviews.llvm.org/D35262 https://reviews.llvm.org/D35049 llvm-svn: 308729
2017-07-21 19:59:37 +08:00
%tmp20 = getelementptr inbounds %0, %0* %tmp7, i64 -4
%tmp21 = getelementptr inbounds %0, %0* %tmp6, i64 -4
%tmp22 = bitcast %0* %tmp21 to i8*
%tmp23 = bitcast %0* %tmp20 to i8*
Remove alignment argument from memcpy/memmove/memset in favour of alignment attributes (Step 1) Summary: This is a resurrection of work first proposed and discussed in Aug 2015: http://lists.llvm.org/pipermail/llvm-dev/2015-August/089384.html and initially landed (but then backed out) in Nov 2015: http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151109/312083.html The @llvm.memcpy/memmove/memset intrinsics currently have an explicit argument which is required to be a constant integer. It represents the alignment of the dest (and source), and so must be the minimum of the actual alignment of the two. This change is the first in a series that allows source and dest to each have their own alignments by using the alignment attribute on their arguments. In this change we: 1) Remove the alignment argument. 2) Add alignment attributes to the source & dest arguments. We, temporarily, require that the alignments for source & dest be equal. For example, code which used to read: call void @llvm.memcpy.p0i8.p0i8.i32(i8* %dest, i8* %src, i32 100, i32 4, i1 false) will now read call void @llvm.memcpy.p0i8.p0i8.i32(i8* align 4 %dest, i8* align 4 %src, i32 100, i1 false) Downstream users may have to update their lit tests that check for @llvm.memcpy/memmove/memset call/declaration patterns. The following extended sed script may help with updating the majority of your tests, but it does not catch all possible patterns so some manual checking and updating will be required. s~declare void @llvm\.mem(set|cpy|move)\.p([^(]*)\((.*), i32, i1\)~declare void @llvm.mem\1.p\2(\3, i1)~g s~call void @llvm\.memset\.p([^(]*)i8\(i8([^*]*)\* (.*), i8 (.*), i8 (.*), i32 [01], i1 ([^)]*)\)~call void @llvm.memset.p\1i8(i8\2* \3, i8 \4, i8 \5, i1 \6)~g s~call void @llvm\.memset\.p([^(]*)i16\(i8([^*]*)\* (.*), i8 (.*), i16 (.*), i32 [01], i1 ([^)]*)\)~call void @llvm.memset.p\1i16(i8\2* \3, i8 \4, i16 \5, i1 \6)~g s~call void @llvm\.memset\.p([^(]*)i32\(i8([^*]*)\* (.*), i8 (.*), i32 (.*), i32 [01], i1 ([^)]*)\)~call void @llvm.memset.p\1i32(i8\2* \3, i8 \4, i32 \5, i1 \6)~g s~call void @llvm\.memset\.p([^(]*)i64\(i8([^*]*)\* (.*), i8 (.*), i64 (.*), i32 [01], i1 ([^)]*)\)~call void @llvm.memset.p\1i64(i8\2* \3, i8 \4, i64 \5, i1 \6)~g s~call void @llvm\.memset\.p([^(]*)i128\(i8([^*]*)\* (.*), i8 (.*), i128 (.*), i32 [01], i1 ([^)]*)\)~call void @llvm.memset.p\1i128(i8\2* \3, i8 \4, i128 \5, i1 \6)~g s~call void @llvm\.memset\.p([^(]*)i8\(i8([^*]*)\* (.*), i8 (.*), i8 (.*), i32 ([0-9]*), i1 ([^)]*)\)~call void @llvm.memset.p\1i8(i8\2* align \6 \3, i8 \4, i8 \5, i1 \7)~g s~call void @llvm\.memset\.p([^(]*)i16\(i8([^*]*)\* (.*), i8 (.*), i16 (.*), i32 ([0-9]*), i1 ([^)]*)\)~call void @llvm.memset.p\1i16(i8\2* align \6 \3, i8 \4, i16 \5, i1 \7)~g s~call void @llvm\.memset\.p([^(]*)i32\(i8([^*]*)\* (.*), i8 (.*), i32 (.*), i32 ([0-9]*), i1 ([^)]*)\)~call void @llvm.memset.p\1i32(i8\2* align \6 \3, i8 \4, i32 \5, i1 \7)~g s~call void @llvm\.memset\.p([^(]*)i64\(i8([^*]*)\* (.*), i8 (.*), i64 (.*), i32 ([0-9]*), i1 ([^)]*)\)~call void @llvm.memset.p\1i64(i8\2* align \6 \3, i8 \4, i64 \5, i1 \7)~g s~call void @llvm\.memset\.p([^(]*)i128\(i8([^*]*)\* (.*), i8 (.*), i128 (.*), i32 ([0-9]*), i1 ([^)]*)\)~call void @llvm.memset.p\1i128(i8\2* align \6 \3, i8 \4, i128 \5, i1 \7)~g s~call void @llvm\.mem(cpy|move)\.p([^(]*)i8\(i8([^*]*)\* (.*), i8([^*]*)\* (.*), i8 (.*), i32 [01], i1 ([^)]*)\)~call void @llvm.mem\1.p\2i8(i8\3* \4, i8\5* \6, i8 \7, i1 \8)~g s~call void @llvm\.mem(cpy|move)\.p([^(]*)i16\(i8([^*]*)\* (.*), i8([^*]*)\* (.*), i16 (.*), i32 [01], i1 ([^)]*)\)~call void @llvm.mem\1.p\2i16(i8\3* \4, i8\5* \6, i16 \7, i1 \8)~g s~call void @llvm\.mem(cpy|move)\.p([^(]*)i32\(i8([^*]*)\* (.*), i8([^*]*)\* (.*), i32 (.*), i32 [01], i1 ([^)]*)\)~call void @llvm.mem\1.p\2i32(i8\3* \4, i8\5* \6, i32 \7, i1 \8)~g s~call void @llvm\.mem(cpy|move)\.p([^(]*)i64\(i8([^*]*)\* (.*), i8([^*]*)\* (.*), i64 (.*), i32 [01], i1 ([^)]*)\)~call void @llvm.mem\1.p\2i64(i8\3* \4, i8\5* \6, i64 \7, i1 \8)~g s~call void @llvm\.mem(cpy|move)\.p([^(]*)i128\(i8([^*]*)\* (.*), i8([^*]*)\* (.*), i128 (.*), i32 [01], i1 ([^)]*)\)~call void @llvm.mem\1.p\2i128(i8\3* \4, i8\5* \6, i128 \7, i1 \8)~g s~call void @llvm\.mem(cpy|move)\.p([^(]*)i8\(i8([^*]*)\* (.*), i8([^*]*)\* (.*), i8 (.*), i32 ([0-9]*), i1 ([^)]*)\)~call void @llvm.mem\1.p\2i8(i8\3* align \8 \4, i8\5* align \8 \6, i8 \7, i1 \9)~g s~call void @llvm\.mem(cpy|move)\.p([^(]*)i16\(i8([^*]*)\* (.*), i8([^*]*)\* (.*), i16 (.*), i32 ([0-9]*), i1 ([^)]*)\)~call void @llvm.mem\1.p\2i16(i8\3* align \8 \4, i8\5* align \8 \6, i16 \7, i1 \9)~g s~call void @llvm\.mem(cpy|move)\.p([^(]*)i32\(i8([^*]*)\* (.*), i8([^*]*)\* (.*), i32 (.*), i32 ([0-9]*), i1 ([^)]*)\)~call void @llvm.mem\1.p\2i32(i8\3* align \8 \4, i8\5* align \8 \6, i32 \7, i1 \9)~g s~call void @llvm\.mem(cpy|move)\.p([^(]*)i64\(i8([^*]*)\* (.*), i8([^*]*)\* (.*), i64 (.*), i32 ([0-9]*), i1 ([^)]*)\)~call void @llvm.mem\1.p\2i64(i8\3* align \8 \4, i8\5* align \8 \6, i64 \7, i1 \9)~g s~call void @llvm\.mem(cpy|move)\.p([^(]*)i128\(i8([^*]*)\* (.*), i8([^*]*)\* (.*), i128 (.*), i32 ([0-9]*), i1 ([^)]*)\)~call void @llvm.mem\1.p\2i128(i8\3* align \8 \4, i8\5* align \8 \6, i128 \7, i1 \9)~g The remaining changes in the series will: Step 2) Expand the IRBuilder API to allow creation of memcpy/memmove with differing source and dest alignments. Step 3) Update Clang to use the new IRBuilder API. Step 4) Update Polly to use the new IRBuilder API. Step 5) Update LLVM passes that create memcpy/memmove calls to use the new IRBuilder API, and those that use use MemIntrinsicInst::[get|set]Alignment() to use getDestAlignment() and getSourceAlignment() instead. Step 6) Remove the single-alignment IRBuilder API for memcpy/memmove, and the MemIntrinsicInst::[get|set]Alignment() methods. Reviewers: pete, hfinkel, lhames, reames, bollu Reviewed By: reames Subscribers: niosHD, reames, jholewinski, qcolombet, jfb, sanjoy, arsenm, dschuff, dylanmckay, mehdi_amini, sdardis, nemanjai, david2050, nhaehnle, javed.absar, sbc100, jgravelle-google, eraman, aheejin, kbarton, JDevlieghere, asb, rbar, johnrusso, simoncook, jordy.potman.lists, apazos, sabuasal, llvm-commits Differential Revision: https://reviews.llvm.org/D41675 llvm-svn: 322965
2018-01-20 01:13:12 +08:00
tail call void @llvm.memcpy.p0i8.p0i8.i64(i8* align 8 %tmp22, i8* align 8 %tmp23, i64 24, i1 false)
[SystemZ, LoopStrengthReduce] This patch makes LSR generate better code for SystemZ in the cases of memory intrinsics, Load->Store pairs or comparison of immediate with memory. In order to achieve this, the following common code changes were made: * New TTI hook: LSRWithInstrQueries(), which defaults to false. Controls if LSR should do instruction-based addressing evaluations by calling isLegalAddressingMode() with the Instruction pointers. * In LoopStrengthReduce: handle address operands of memset, memmove and memcpy as address uses, and call isFoldableMemAccessOffset() for any LSRUse::Address, not just loads or stores. SystemZ changes: * isLSRCostLess() implemented with Insns first, and without ImmCost. * New function supportedAddressingMode() that is a helper for TTI methods looking at Instructions passed via pointers. Review: Ulrich Weigand, Quentin Colombet https://reviews.llvm.org/D35262 https://reviews.llvm.org/D35049 llvm-svn: 308729
2017-07-21 19:59:37 +08:00
br label %bb5
}
; Test that a chsi does not need an aghik inside the loop (no index reg)
define void @f9() {
; CHECK-Z13-LABEL: f9:
; CHECK-Z13: # =>This Inner Loop Header: Depth=1
; CHECK-Z13-NOT: aghik
; CHECK-Z13: chsi
entry:
br label %for.body.i63
for.body.i63: ; preds = %for.inc.i, %entry
%indvars.iv155.i = phi i64 [ 0, %entry ], [ %indvars.iv.next156.i.3, %for.inc.i ]
%arrayidx.i62 = getelementptr inbounds i32, i32* undef, i64 %indvars.iv155.i
%tmp = load i32, i32* %arrayidx.i62, align 4
%cmp9.i = icmp eq i32 %tmp, 0
br i1 %cmp9.i, label %for.inc.i, label %if.then10.i
if.then10.i: ; preds = %for.body.i63
unreachable
for.inc.i: ; preds = %for.body.i63
%indvars.iv.next156.i = or i64 %indvars.iv155.i, 1
%arrayidx.i62.1 = getelementptr inbounds i32, i32* undef, i64 %indvars.iv.next156.i
%tmp1 = load i32, i32* %arrayidx.i62.1, align 4
%indvars.iv.next156.i.3 = add nsw i64 %indvars.iv155.i, 4
br label %for.body.i63
}