2018-06-01 06:02:34 +08:00
|
|
|
//===-- WasmEHPrepare - Prepare excepton handling for WebAssembly --------===//
|
|
|
|
//
|
2019-01-19 16:50:56 +08:00
|
|
|
// Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions.
|
|
|
|
// See https://llvm.org/LICENSE.txt for license information.
|
|
|
|
// SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception
|
2018-06-01 06:02:34 +08:00
|
|
|
//
|
|
|
|
//===----------------------------------------------------------------------===//
|
|
|
|
//
|
|
|
|
// This transformation is designed for use by code generators which use
|
[WebAssembly] Exception handling: Switch to the new proposal
Summary:
This switches the EH implementation to the new proposal:
https://github.com/WebAssembly/exception-handling/blob/master/proposals/Exceptions.md
(The previous proposal was
https://github.com/WebAssembly/exception-handling/blob/master/proposals/old/Exceptions.md)
- Instruction changes
- Now we have one single `catch` instruction that returns a except_ref
value
- `throw` now can take variable number of operations
- `rethrow` does not have 'depth' argument anymore
- `br_on_exn` queries an except_ref to see if it matches the tag and
branches to the given label if true.
- `extract_exception` is a pseudo instruction that simulates popping
values from wasm stack. This is to make `br_on_exn`, a very special
instruction, work: `br_on_exn` puts values onto the stack only if it
is taken, and the # of values can vay depending on the tag.
- Now there's only one `catch` per `try`, this patch removes all special
handling for terminate pad with a call to `__clang_call_terminate`.
Before it was the only case there are two catch clauses (a normal
`catch` and `catch_all` per `try`).
- Make `rethrow` act as a terminator like `throw`. This splits BB after
`rethrow` in WasmEHPrepare, and deletes an unnecessary `unreachable`
after `rethrow` in LateEHPrepare.
- Now we stop at all catchpads (because we add wasm `catch` instruction
that catches all exceptions), this creates new
`findWasmUnwindDestinations` function in SelectionDAGBuilder.
- Now we use `br_on_exn` instrution to figure out if an except_ref
matches the current tag or not, LateEHPrepare generates this sequence
for catch pads:
```
catch
block i32
br_on_exn $__cpp_exception
end_block
extract_exception
```
- Branch analysis for `br_on_exn` in WebAssemblyInstrInfo
- Other various misc. changes to switch to the new proposal.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D57134
llvm-svn: 352598
2019-01-30 11:21:57 +08:00
|
|
|
// WebAssembly exception handling scheme. This currently supports C++
|
|
|
|
// exceptions.
|
2018-06-01 06:02:34 +08:00
|
|
|
//
|
|
|
|
// WebAssembly exception handling uses Windows exception IR for the middle level
|
|
|
|
// representation. This pass does the following transformation for every
|
|
|
|
// catchpad block:
|
|
|
|
// (In C-style pseudocode)
|
|
|
|
//
|
|
|
|
// - Before:
|
|
|
|
// catchpad ...
|
|
|
|
// exn = wasm.get.exception();
|
|
|
|
// selector = wasm.get.selector();
|
|
|
|
// ...
|
|
|
|
//
|
|
|
|
// - After:
|
|
|
|
// catchpad ...
|
2021-08-25 10:43:28 +08:00
|
|
|
// exn = wasm.catch(WebAssembly::CPP_EXCEPTION);
|
2018-06-01 06:02:34 +08:00
|
|
|
// // Only add below in case it's not a single catch (...)
|
[WebAssembly] Exception handling: Switch to the new proposal
Summary:
This switches the EH implementation to the new proposal:
https://github.com/WebAssembly/exception-handling/blob/master/proposals/Exceptions.md
(The previous proposal was
https://github.com/WebAssembly/exception-handling/blob/master/proposals/old/Exceptions.md)
- Instruction changes
- Now we have one single `catch` instruction that returns a except_ref
value
- `throw` now can take variable number of operations
- `rethrow` does not have 'depth' argument anymore
- `br_on_exn` queries an except_ref to see if it matches the tag and
branches to the given label if true.
- `extract_exception` is a pseudo instruction that simulates popping
values from wasm stack. This is to make `br_on_exn`, a very special
instruction, work: `br_on_exn` puts values onto the stack only if it
is taken, and the # of values can vay depending on the tag.
- Now there's only one `catch` per `try`, this patch removes all special
handling for terminate pad with a call to `__clang_call_terminate`.
Before it was the only case there are two catch clauses (a normal
`catch` and `catch_all` per `try`).
- Make `rethrow` act as a terminator like `throw`. This splits BB after
`rethrow` in WasmEHPrepare, and deletes an unnecessary `unreachable`
after `rethrow` in LateEHPrepare.
- Now we stop at all catchpads (because we add wasm `catch` instruction
that catches all exceptions), this creates new
`findWasmUnwindDestinations` function in SelectionDAGBuilder.
- Now we use `br_on_exn` instrution to figure out if an except_ref
matches the current tag or not, LateEHPrepare generates this sequence
for catch pads:
```
catch
block i32
br_on_exn $__cpp_exception
end_block
extract_exception
```
- Branch analysis for `br_on_exn` in WebAssemblyInstrInfo
- Other various misc. changes to switch to the new proposal.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D57134
llvm-svn: 352598
2019-01-30 11:21:57 +08:00
|
|
|
// wasm.landingpad.index(index);
|
2018-06-01 06:02:34 +08:00
|
|
|
// __wasm_lpad_context.lpad_index = index;
|
|
|
|
// __wasm_lpad_context.lsda = wasm.lsda();
|
|
|
|
// _Unwind_CallPersonality(exn);
|
2021-08-25 11:40:21 +08:00
|
|
|
// selector = __wasm_lpad_context.selector;
|
2018-06-01 06:02:34 +08:00
|
|
|
// ...
|
|
|
|
//
|
|
|
|
//
|
|
|
|
// * Background: Direct personality function call
|
|
|
|
// In WebAssembly EH, the VM is responsible for unwinding the stack once an
|
|
|
|
// exception is thrown. After the stack is unwound, the control flow is
|
[WebAssembly] Exception handling: Switch to the new proposal
Summary:
This switches the EH implementation to the new proposal:
https://github.com/WebAssembly/exception-handling/blob/master/proposals/Exceptions.md
(The previous proposal was
https://github.com/WebAssembly/exception-handling/blob/master/proposals/old/Exceptions.md)
- Instruction changes
- Now we have one single `catch` instruction that returns a except_ref
value
- `throw` now can take variable number of operations
- `rethrow` does not have 'depth' argument anymore
- `br_on_exn` queries an except_ref to see if it matches the tag and
branches to the given label if true.
- `extract_exception` is a pseudo instruction that simulates popping
values from wasm stack. This is to make `br_on_exn`, a very special
instruction, work: `br_on_exn` puts values onto the stack only if it
is taken, and the # of values can vay depending on the tag.
- Now there's only one `catch` per `try`, this patch removes all special
handling for terminate pad with a call to `__clang_call_terminate`.
Before it was the only case there are two catch clauses (a normal
`catch` and `catch_all` per `try`).
- Make `rethrow` act as a terminator like `throw`. This splits BB after
`rethrow` in WasmEHPrepare, and deletes an unnecessary `unreachable`
after `rethrow` in LateEHPrepare.
- Now we stop at all catchpads (because we add wasm `catch` instruction
that catches all exceptions), this creates new
`findWasmUnwindDestinations` function in SelectionDAGBuilder.
- Now we use `br_on_exn` instrution to figure out if an except_ref
matches the current tag or not, LateEHPrepare generates this sequence
for catch pads:
```
catch
block i32
br_on_exn $__cpp_exception
end_block
extract_exception
```
- Branch analysis for `br_on_exn` in WebAssemblyInstrInfo
- Other various misc. changes to switch to the new proposal.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D57134
llvm-svn: 352598
2019-01-30 11:21:57 +08:00
|
|
|
// transfered to WebAssembly 'catch' instruction.
|
2018-06-01 06:02:34 +08:00
|
|
|
//
|
|
|
|
// Unwinding the stack is not done by libunwind but the VM, so the personality
|
|
|
|
// function in libcxxabi cannot be called from libunwind during the unwinding
|
|
|
|
// process. So after a catch instruction, we insert a call to a wrapper function
|
|
|
|
// in libunwind that in turn calls the real personality function.
|
|
|
|
//
|
|
|
|
// In Itanium EH, if the personality function decides there is no matching catch
|
|
|
|
// clause in a call frame and no cleanup action to perform, the unwinder doesn't
|
|
|
|
// stop there and continues unwinding. But in Wasm EH, the unwinder stops at
|
|
|
|
// every call frame with a catch intruction, after which the personality
|
|
|
|
// function is called from the compiler-generated user code here.
|
|
|
|
//
|
|
|
|
// In libunwind, we have this struct that serves as a communincation channel
|
|
|
|
// between the compiler-generated user code and the personality function in
|
|
|
|
// libcxxabi.
|
|
|
|
//
|
|
|
|
// struct _Unwind_LandingPadContext {
|
|
|
|
// uintptr_t lpad_index;
|
|
|
|
// uintptr_t lsda;
|
|
|
|
// uintptr_t selector;
|
|
|
|
// };
|
|
|
|
// struct _Unwind_LandingPadContext __wasm_lpad_context = ...;
|
|
|
|
//
|
|
|
|
// And this wrapper in libunwind calls the personality function.
|
|
|
|
//
|
|
|
|
// _Unwind_Reason_Code _Unwind_CallPersonality(void *exception_ptr) {
|
|
|
|
// struct _Unwind_Exception *exception_obj =
|
|
|
|
// (struct _Unwind_Exception *)exception_ptr;
|
|
|
|
// _Unwind_Reason_Code ret = __gxx_personality_v0(
|
|
|
|
// 1, _UA_CLEANUP_PHASE, exception_obj->exception_class, exception_obj,
|
|
|
|
// (struct _Unwind_Context *)__wasm_lpad_context);
|
|
|
|
// return ret;
|
|
|
|
// }
|
|
|
|
//
|
|
|
|
// We pass a landing pad index, and the address of LSDA for the current function
|
|
|
|
// to the wrapper function _Unwind_CallPersonality in libunwind, and we retrieve
|
|
|
|
// the selector after it returns.
|
|
|
|
//
|
|
|
|
//===----------------------------------------------------------------------===//
|
|
|
|
|
2022-03-15 17:54:19 +08:00
|
|
|
#include "llvm/CodeGen/MachineBasicBlock.h"
|
|
|
|
#include "llvm/CodeGen/Passes.h"
|
2018-06-19 08:26:39 +08:00
|
|
|
#include "llvm/CodeGen/WasmEHFuncInfo.h"
|
2018-06-01 06:02:34 +08:00
|
|
|
#include "llvm/IR/IRBuilder.h"
|
2019-12-11 23:55:26 +08:00
|
|
|
#include "llvm/IR/IntrinsicsWebAssembly.h"
|
Sink all InitializePasses.h includes
This file lists every pass in LLVM, and is included by Pass.h, which is
very popular. Every time we add, remove, or rename a pass in LLVM, it
caused lots of recompilation.
I found this fact by looking at this table, which is sorted by the
number of times a file was changed over the last 100,000 git commits
multiplied by the number of object files that depend on it in the
current checkout:
recompiles touches affected_files header
342380 95 3604 llvm/include/llvm/ADT/STLExtras.h
314730 234 1345 llvm/include/llvm/InitializePasses.h
307036 118 2602 llvm/include/llvm/ADT/APInt.h
213049 59 3611 llvm/include/llvm/Support/MathExtras.h
170422 47 3626 llvm/include/llvm/Support/Compiler.h
162225 45 3605 llvm/include/llvm/ADT/Optional.h
158319 63 2513 llvm/include/llvm/ADT/Triple.h
140322 39 3598 llvm/include/llvm/ADT/StringRef.h
137647 59 2333 llvm/include/llvm/Support/Error.h
131619 73 1803 llvm/include/llvm/Support/FileSystem.h
Before this change, touching InitializePasses.h would cause 1345 files
to recompile. After this change, touching it only causes 550 compiles in
an incremental rebuild.
Reviewers: bkramer, asbirlea, bollu, jdoerfert
Differential Revision: https://reviews.llvm.org/D70211
2019-11-14 05:15:01 +08:00
|
|
|
#include "llvm/InitializePasses.h"
|
2018-06-01 06:02:34 +08:00
|
|
|
#include "llvm/Transforms/Utils/BasicBlockUtils.h"
|
|
|
|
|
|
|
|
using namespace llvm;
|
|
|
|
|
|
|
|
#define DEBUG_TYPE "wasmehprepare"
|
|
|
|
|
|
|
|
namespace {
|
|
|
|
class WasmEHPrepare : public FunctionPass {
|
|
|
|
Type *LPadContextTy = nullptr; // type of 'struct _Unwind_LandingPadContext'
|
|
|
|
GlobalVariable *LPadContextGV = nullptr; // __wasm_lpad_context
|
|
|
|
|
|
|
|
// Field addresses of struct _Unwind_LandingPadContext
|
|
|
|
Value *LPadIndexField = nullptr; // lpad_index field
|
|
|
|
Value *LSDAField = nullptr; // lsda field
|
|
|
|
Value *SelectorField = nullptr; // selector
|
|
|
|
|
[WebAssembly] Make rethrow take an except_ref type argument
Summary:
In the new wasm EH proposal, `rethrow` takes an `except_ref` argument.
This change was missing in r352598.
This patch adds `llvm.wasm.rethrow.in.catch` intrinsic. This is an
intrinsic that's gonna eventually be lowered to wasm `rethrow`
instruction, but this intrinsic can appear only within a catchpad or a
cleanuppad scope. Also this intrinsic needs to be invokable - otherwise
EH pad successor for it will not be correctly generated in clang.
This also adds lowering logic for this intrinsic in
`SelectionDAGBuilder::visitInvoke`. This routine is basically a
specialized and simplified version of
`SelectionDAGBuilder::visitTargetIntrinsic`, but we can't use it
because if is only for `CallInst`s.
This deletes the previous `llvm.wasm.rethrow` intrinsic and related
tests, which was meant to be used within a `__cxa_rethrow` library
function. Turned out this needs some more logic, so the intrinsic for
this purpose will be added later.
LateEHPrepare takes a result value of `catch` and inserts it into
matching `rethrow` as an argument.
`RETHROW_IN_CATCH` is a pseudo instruction that serves as a link between
`llvm.wasm.rethrow.in.catch` and the real wasm `rethrow` instruction. To
generate a `rethrow` instruction, we need an `except_ref` argument,
which is generated from `catch` instruction. But `catch` instrutions are
added in LateEHPrepare pass, so we use `RETHROW_IN_CATCH`, which takes
no argument, until we are able to correctly lower it to `rethrow` in
LateEHPrepare.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59352
llvm-svn: 356316
2019-03-16 13:38:57 +08:00
|
|
|
Function *ThrowF = nullptr; // wasm.throw() intrinsic
|
|
|
|
Function *LPadIndexF = nullptr; // wasm.landingpad.index() intrinsic
|
|
|
|
Function *LSDAF = nullptr; // wasm.lsda() intrinsic
|
|
|
|
Function *GetExnF = nullptr; // wasm.get.exception() intrinsic
|
2021-08-25 10:43:28 +08:00
|
|
|
Function *CatchF = nullptr; // wasm.catch() intrinsic
|
[WebAssembly] Make rethrow take an except_ref type argument
Summary:
In the new wasm EH proposal, `rethrow` takes an `except_ref` argument.
This change was missing in r352598.
This patch adds `llvm.wasm.rethrow.in.catch` intrinsic. This is an
intrinsic that's gonna eventually be lowered to wasm `rethrow`
instruction, but this intrinsic can appear only within a catchpad or a
cleanuppad scope. Also this intrinsic needs to be invokable - otherwise
EH pad successor for it will not be correctly generated in clang.
This also adds lowering logic for this intrinsic in
`SelectionDAGBuilder::visitInvoke`. This routine is basically a
specialized and simplified version of
`SelectionDAGBuilder::visitTargetIntrinsic`, but we can't use it
because if is only for `CallInst`s.
This deletes the previous `llvm.wasm.rethrow` intrinsic and related
tests, which was meant to be used within a `__cxa_rethrow` library
function. Turned out this needs some more logic, so the intrinsic for
this purpose will be added later.
LateEHPrepare takes a result value of `catch` and inserts it into
matching `rethrow` as an argument.
`RETHROW_IN_CATCH` is a pseudo instruction that serves as a link between
`llvm.wasm.rethrow.in.catch` and the real wasm `rethrow` instruction. To
generate a `rethrow` instruction, we need an `except_ref` argument,
which is generated from `catch` instruction. But `catch` instrutions are
added in LateEHPrepare pass, so we use `RETHROW_IN_CATCH`, which takes
no argument, until we are able to correctly lower it to `rethrow` in
LateEHPrepare.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59352
llvm-svn: 356316
2019-03-16 13:38:57 +08:00
|
|
|
Function *GetSelectorF = nullptr; // wasm.get.ehselector() intrinsic
|
[opaque pointer types] Add a FunctionCallee wrapper type, and use it.
Recommit r352791 after tweaking DerivedTypes.h slightly, so that gcc
doesn't choke on it, hopefully.
Original Message:
The FunctionCallee type is effectively a {FunctionType*,Value*} pair,
and is a useful convenience to enable code to continue passing the
result of getOrInsertFunction() through to EmitCall, even once pointer
types lose their pointee-type.
Then:
- update the CallInst/InvokeInst instruction creation functions to
take a Callee,
- modify getOrInsertFunction to return FunctionCallee, and
- update all callers appropriately.
One area of particular note is the change to the sanitizer
code. Previously, they had been casting the result of
`getOrInsertFunction` to a `Function*` via
`checkSanitizerInterfaceFunction`, and storing that. That would report
an error if someone had already inserted a function declaraction with
a mismatching signature.
However, in general, LLVM allows for such mismatches, as
`getOrInsertFunction` will automatically insert a bitcast if
needed. As part of this cleanup, cause the sanitizer code to do the
same. (It will call its functions using the expected signature,
however they may have been declared.)
Finally, in a small number of locations, callers of
`getOrInsertFunction` actually were expecting/requiring that a brand
new function was being created. In such cases, I've switched them to
Function::Create instead.
Differential Revision: https://reviews.llvm.org/D57315
llvm-svn: 352827
2019-02-01 10:28:03 +08:00
|
|
|
FunctionCallee CallPersonalityF =
|
[WebAssembly] Make rethrow take an except_ref type argument
Summary:
In the new wasm EH proposal, `rethrow` takes an `except_ref` argument.
This change was missing in r352598.
This patch adds `llvm.wasm.rethrow.in.catch` intrinsic. This is an
intrinsic that's gonna eventually be lowered to wasm `rethrow`
instruction, but this intrinsic can appear only within a catchpad or a
cleanuppad scope. Also this intrinsic needs to be invokable - otherwise
EH pad successor for it will not be correctly generated in clang.
This also adds lowering logic for this intrinsic in
`SelectionDAGBuilder::visitInvoke`. This routine is basically a
specialized and simplified version of
`SelectionDAGBuilder::visitTargetIntrinsic`, but we can't use it
because if is only for `CallInst`s.
This deletes the previous `llvm.wasm.rethrow` intrinsic and related
tests, which was meant to be used within a `__cxa_rethrow` library
function. Turned out this needs some more logic, so the intrinsic for
this purpose will be added later.
LateEHPrepare takes a result value of `catch` and inserts it into
matching `rethrow` as an argument.
`RETHROW_IN_CATCH` is a pseudo instruction that serves as a link between
`llvm.wasm.rethrow.in.catch` and the real wasm `rethrow` instruction. To
generate a `rethrow` instruction, we need an `except_ref` argument,
which is generated from `catch` instruction. But `catch` instrutions are
added in LateEHPrepare pass, so we use `RETHROW_IN_CATCH`, which takes
no argument, until we are able to correctly lower it to `rethrow` in
LateEHPrepare.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59352
llvm-svn: 356316
2019-03-16 13:38:57 +08:00
|
|
|
nullptr; // _Unwind_CallPersonality() wrapper
|
2018-06-01 06:02:34 +08:00
|
|
|
|
2018-11-16 08:47:18 +08:00
|
|
|
bool prepareThrows(Function &F);
|
[WebAssembly] Disable wasm.lsda() optimization in WasmEHPrepare
In every catchpad except `catch (...)`, we add a call to
`_Unwind_CallPersonality`, which is a wapper to call the personality
function. (In most of other Itanium-based architectures the call is done
from libunwind, but in wasm we don't have the control over the VM.)
Because the personatlity function is called to figure out whether the
current exception is a type we should catch, such as `int` or
`SomeClass&`, `catch (...)` does not need the personality function call.
For the same reason, all cleanuppads don't need it.
When we call `_Unwind_CallPersonality`, we store some necessary info in
a data structure called `__wasm_lpad_context` of type
`_Unwind_LandingPadContext`, which is defined in the wasm's port of
libunwind in Emscripten. Also the personality wrapper function returns
some info (selector and the caught pointer) in that data structure, so
it is used as a medium for communication.
One of the info we need to store is the address for LSDA info for the
current function. `wasm.lsda()` intrinsic returns that address. (This
intrinsic will be lowered to a symbol that points to the LSDA address.)
The simpliest thing is call `wasm.lsda()` every time we need to call
`_Unwind_CallPersonality` and store that info in `__wasm_lpad_context`
data structure. But we tried to be better than that (D77423 and some
more previous CLs), so if catchpad A dominates catchpad B and catchpad A
is not `catch (...)`, we didn't insert `wasm.lsda()` call in catchpad B,
thinking that the LSDA address is the same for a single function and we
already visited catchpad A and `__wasm_lpad_context.lsda` field would
already have that value.
But this can be incorrect if there is a call to another function, which
also can have the personality function and LSDA, between catchpad A and
catchpad B, because `__wasm_lpad_context` is a globally defined
structure and the callee function will overwrite its `lsda` field.
So in this CL we don't try to do any optimizaions on adding
`wasm.lsda()` call; we store the result of `wasm.lsda()` every time we
call `_Unwind_CallPersonality`. We can do some complicated analysis,
like checking if there is a function call between the dominating
catchpad and the current catchpad, but at this time it seems overkill.
This deletes three tests because they all tested `wasm.ldsa()` call
optimization.
Fixes https://github.com/emscripten-core/emscripten/issues/13548.
Reviewed By: tlively
Differential Revision: https://reviews.llvm.org/D97309
2021-02-24 03:00:11 +08:00
|
|
|
bool prepareEHPads(Function &F);
|
|
|
|
void prepareEHPad(BasicBlock *BB, bool NeedPersonality, unsigned Index = 0);
|
2018-06-01 06:02:34 +08:00
|
|
|
|
|
|
|
public:
|
|
|
|
static char ID; // Pass identification, replacement for typeid
|
|
|
|
|
|
|
|
WasmEHPrepare() : FunctionPass(ID) {}
|
|
|
|
bool doInitialization(Module &M) override;
|
|
|
|
bool runOnFunction(Function &F) override;
|
|
|
|
|
|
|
|
StringRef getPassName() const override {
|
|
|
|
return "WebAssembly Exception handling preparation";
|
|
|
|
}
|
|
|
|
};
|
|
|
|
} // end anonymous namespace
|
|
|
|
|
|
|
|
char WasmEHPrepare::ID = 0;
|
[WebAssembly] Fix wasm.lsda() optimization in WasmEHPrepare
Summary:
When we insert a call to the personality function wrapper
(`_Unwind_CallPersonality`) for a catch pad, we store some necessary
info in `__wasm_lpad_context` struct and pass it. One of the info is the
LSDA address for the function. For this, we insert a call to
`wasm.lsda()`, which will be lowered down to the address of LSDA, and
store it in a field in `__wasm_lpad_context`.
There are exceptions to this personality call insertion: catchpads for
`catch (...)` and cleanuppads (for destructors) don't need personality
function calls, because we don't need to figure out whether the current
exception should be caught or not. (They always should.)
There was a little optimization to `wasm.lsda()` call insertion. Because
the LSDA address is the same throughout a function, we don't need to
insert a store of `wasm.lsda()` return value in every catchpad. For
example:
```
try {
foo();
} catch (int) {
// wasm.lsda() call and a store are inserted here, like, in
// pseudocode,
// %lsda = wasm.lsda();
// store %lsda to a field in __wasm_lpad_context
try {
foo();
} catch (int) {
// We don't need to insert the wasm.lsda() and store again, because
// to arrive here, we have already stored the LSDA address to
// __wasm_lpad_context in the outer catch.
}
}
```
So the previous algorithm checked if the current catch has a parent EH
pad, we didn't insert a call to `wasm.lsda()` and its store.
But this was incorrect, because what if the outer catch is `catch (...)`
or a cleanuppad?
```
try {
foo();
} catch (...) {
// wasm.lsda() call and a store are NOT inserted here
try {
foo();
} catch (int) {
// We need wasm.lsda() here!
}
}
```
In this case we need to insert `wasm.lsda()` in the inner catchpad,
because the outer catchpad does not have one.
To minimize the number of inserted `wasm.lsda()` calls and stores, we
need a way to figure out whether we have encountered `wasm.lsda()` call
in any of EH pads that dominates the current EH pad. To figure that
out, we now visit EH pads in BFS order in the dominator tree so that we
visit parent BBs first before visiting its child BBs in the domtree.
We keep a set named `ExecutedLSDA`, which basically means "Do we have
`wasm.lsda()` either in the current EH pad or any of its parent EH
pads in the dominator tree?". This is to prevent scanning the domtree up
to the root in the worst case every time we examine an EH pad: each EH
pad only needs to examine its immediate parent EH pad.
- If any of its parent EH pads in the domtree has `wasm.lsda()`, this
means we don't need `wasm.lsda()` in the current EH pad. We also insert
the current EH pad in `ExecutedLSDA` set.
- If none of its parent EH pad has `wasm.lsda()`
- If the current EH pad is a `catch (...)` or a cleanuppad, done.
- If the current EH pad is neither a `catch (...)` nor a cleanuppad,
add `wasm.lsda()` and the store in the current EH pad, and add the
current EH pad to `ExecutedLSDA` set.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77423
2020-04-01 07:08:01 +08:00
|
|
|
INITIALIZE_PASS_BEGIN(WasmEHPrepare, DEBUG_TYPE,
|
|
|
|
"Prepare WebAssembly exceptions", false, false)
|
|
|
|
INITIALIZE_PASS_END(WasmEHPrepare, DEBUG_TYPE, "Prepare WebAssembly exceptions",
|
|
|
|
false, false)
|
2018-06-01 06:02:34 +08:00
|
|
|
|
|
|
|
FunctionPass *llvm::createWasmEHPass() { return new WasmEHPrepare(); }
|
|
|
|
|
|
|
|
bool WasmEHPrepare::doInitialization(Module &M) {
|
|
|
|
IRBuilder<> IRB(M.getContext());
|
|
|
|
LPadContextTy = StructType::get(IRB.getInt32Ty(), // lpad_index
|
|
|
|
IRB.getInt8PtrTy(), // lsda
|
|
|
|
IRB.getInt32Ty() // selector
|
|
|
|
);
|
|
|
|
return false;
|
|
|
|
}
|
|
|
|
|
2018-11-16 08:47:18 +08:00
|
|
|
// Erase the specified BBs if the BB does not have any remaining predecessors,
|
|
|
|
// and also all its dead children.
|
|
|
|
template <typename Container>
|
2021-07-26 09:00:52 +08:00
|
|
|
static void eraseDeadBBsAndChildren(const Container &BBs) {
|
2018-11-16 08:47:18 +08:00
|
|
|
SmallVector<BasicBlock *, 8> WL(BBs.begin(), BBs.end());
|
|
|
|
while (!WL.empty()) {
|
|
|
|
auto *BB = WL.pop_back_val();
|
2020-11-23 14:16:12 +08:00
|
|
|
if (!pred_empty(BB))
|
2018-11-16 08:47:18 +08:00
|
|
|
continue;
|
|
|
|
WL.append(succ_begin(BB), succ_end(BB));
|
2021-07-26 09:00:52 +08:00
|
|
|
DeleteDeadBlock(BB);
|
2018-11-16 08:47:18 +08:00
|
|
|
}
|
|
|
|
}
|
|
|
|
|
2018-06-01 06:02:34 +08:00
|
|
|
bool WasmEHPrepare::runOnFunction(Function &F) {
|
2018-11-16 08:47:18 +08:00
|
|
|
bool Changed = false;
|
|
|
|
Changed |= prepareThrows(F);
|
|
|
|
Changed |= prepareEHPads(F);
|
|
|
|
return Changed;
|
|
|
|
}
|
|
|
|
|
|
|
|
bool WasmEHPrepare::prepareThrows(Function &F) {
|
|
|
|
Module &M = *F.getParent();
|
|
|
|
IRBuilder<> IRB(F.getContext());
|
|
|
|
bool Changed = false;
|
|
|
|
|
|
|
|
// wasm.throw() intinsic, which will be lowered to wasm 'throw' instruction.
|
|
|
|
ThrowF = Intrinsic::getDeclaration(&M, Intrinsic::wasm_throw);
|
[WebAssembly] Make rethrow take an except_ref type argument
Summary:
In the new wasm EH proposal, `rethrow` takes an `except_ref` argument.
This change was missing in r352598.
This patch adds `llvm.wasm.rethrow.in.catch` intrinsic. This is an
intrinsic that's gonna eventually be lowered to wasm `rethrow`
instruction, but this intrinsic can appear only within a catchpad or a
cleanuppad scope. Also this intrinsic needs to be invokable - otherwise
EH pad successor for it will not be correctly generated in clang.
This also adds lowering logic for this intrinsic in
`SelectionDAGBuilder::visitInvoke`. This routine is basically a
specialized and simplified version of
`SelectionDAGBuilder::visitTargetIntrinsic`, but we can't use it
because if is only for `CallInst`s.
This deletes the previous `llvm.wasm.rethrow` intrinsic and related
tests, which was meant to be used within a `__cxa_rethrow` library
function. Turned out this needs some more logic, so the intrinsic for
this purpose will be added later.
LateEHPrepare takes a result value of `catch` and inserts it into
matching `rethrow` as an argument.
`RETHROW_IN_CATCH` is a pseudo instruction that serves as a link between
`llvm.wasm.rethrow.in.catch` and the real wasm `rethrow` instruction. To
generate a `rethrow` instruction, we need an `except_ref` argument,
which is generated from `catch` instruction. But `catch` instrutions are
added in LateEHPrepare pass, so we use `RETHROW_IN_CATCH`, which takes
no argument, until we are able to correctly lower it to `rethrow` in
LateEHPrepare.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59352
llvm-svn: 356316
2019-03-16 13:38:57 +08:00
|
|
|
// Insert an unreachable instruction after a call to @llvm.wasm.throw and
|
|
|
|
// delete all following instructions within the BB, and delete all the dead
|
|
|
|
// children of the BB as well.
|
|
|
|
for (User *U : ThrowF->users()) {
|
|
|
|
// A call to @llvm.wasm.throw() is only generated from __cxa_throw()
|
|
|
|
// builtin call within libcxxabi, and cannot be an InvokeInst.
|
|
|
|
auto *ThrowI = cast<CallInst>(U);
|
|
|
|
if (ThrowI->getFunction() != &F)
|
|
|
|
continue;
|
|
|
|
Changed = true;
|
|
|
|
auto *BB = ThrowI->getParent();
|
2021-01-01 01:39:11 +08:00
|
|
|
SmallVector<BasicBlock *, 4> Succs(successors(BB));
|
[WebAssembly] Make rethrow take an except_ref type argument
Summary:
In the new wasm EH proposal, `rethrow` takes an `except_ref` argument.
This change was missing in r352598.
This patch adds `llvm.wasm.rethrow.in.catch` intrinsic. This is an
intrinsic that's gonna eventually be lowered to wasm `rethrow`
instruction, but this intrinsic can appear only within a catchpad or a
cleanuppad scope. Also this intrinsic needs to be invokable - otherwise
EH pad successor for it will not be correctly generated in clang.
This also adds lowering logic for this intrinsic in
`SelectionDAGBuilder::visitInvoke`. This routine is basically a
specialized and simplified version of
`SelectionDAGBuilder::visitTargetIntrinsic`, but we can't use it
because if is only for `CallInst`s.
This deletes the previous `llvm.wasm.rethrow` intrinsic and related
tests, which was meant to be used within a `__cxa_rethrow` library
function. Turned out this needs some more logic, so the intrinsic for
this purpose will be added later.
LateEHPrepare takes a result value of `catch` and inserts it into
matching `rethrow` as an argument.
`RETHROW_IN_CATCH` is a pseudo instruction that serves as a link between
`llvm.wasm.rethrow.in.catch` and the real wasm `rethrow` instruction. To
generate a `rethrow` instruction, we need an `except_ref` argument,
which is generated from `catch` instruction. But `catch` instrutions are
added in LateEHPrepare pass, so we use `RETHROW_IN_CATCH`, which takes
no argument, until we are able to correctly lower it to `rethrow` in
LateEHPrepare.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59352
llvm-svn: 356316
2019-03-16 13:38:57 +08:00
|
|
|
auto &InstList = BB->getInstList();
|
|
|
|
InstList.erase(std::next(BasicBlock::iterator(ThrowI)), InstList.end());
|
|
|
|
IRB.SetInsertPoint(BB);
|
|
|
|
IRB.CreateUnreachable();
|
2021-07-26 09:00:52 +08:00
|
|
|
eraseDeadBBsAndChildren(Succs);
|
2018-11-16 08:47:18 +08:00
|
|
|
}
|
|
|
|
|
|
|
|
return Changed;
|
|
|
|
}
|
|
|
|
|
|
|
|
bool WasmEHPrepare::prepareEHPads(Function &F) {
|
[WebAssembly] Disable wasm.lsda() optimization in WasmEHPrepare
In every catchpad except `catch (...)`, we add a call to
`_Unwind_CallPersonality`, which is a wapper to call the personality
function. (In most of other Itanium-based architectures the call is done
from libunwind, but in wasm we don't have the control over the VM.)
Because the personatlity function is called to figure out whether the
current exception is a type we should catch, such as `int` or
`SomeClass&`, `catch (...)` does not need the personality function call.
For the same reason, all cleanuppads don't need it.
When we call `_Unwind_CallPersonality`, we store some necessary info in
a data structure called `__wasm_lpad_context` of type
`_Unwind_LandingPadContext`, which is defined in the wasm's port of
libunwind in Emscripten. Also the personality wrapper function returns
some info (selector and the caught pointer) in that data structure, so
it is used as a medium for communication.
One of the info we need to store is the address for LSDA info for the
current function. `wasm.lsda()` intrinsic returns that address. (This
intrinsic will be lowered to a symbol that points to the LSDA address.)
The simpliest thing is call `wasm.lsda()` every time we need to call
`_Unwind_CallPersonality` and store that info in `__wasm_lpad_context`
data structure. But we tried to be better than that (D77423 and some
more previous CLs), so if catchpad A dominates catchpad B and catchpad A
is not `catch (...)`, we didn't insert `wasm.lsda()` call in catchpad B,
thinking that the LSDA address is the same for a single function and we
already visited catchpad A and `__wasm_lpad_context.lsda` field would
already have that value.
But this can be incorrect if there is a call to another function, which
also can have the personality function and LSDA, between catchpad A and
catchpad B, because `__wasm_lpad_context` is a globally defined
structure and the callee function will overwrite its `lsda` field.
So in this CL we don't try to do any optimizaions on adding
`wasm.lsda()` call; we store the result of `wasm.lsda()` every time we
call `_Unwind_CallPersonality`. We can do some complicated analysis,
like checking if there is a function call between the dominating
catchpad and the current catchpad, but at this time it seems overkill.
This deletes three tests because they all tested `wasm.ldsa()` call
optimization.
Fixes https://github.com/emscripten-core/emscripten/issues/13548.
Reviewed By: tlively
Differential Revision: https://reviews.llvm.org/D97309
2021-02-24 03:00:11 +08:00
|
|
|
Module &M = *F.getParent();
|
|
|
|
IRBuilder<> IRB(F.getContext());
|
2018-11-16 08:47:18 +08:00
|
|
|
|
[WebAssembly] Disable wasm.lsda() optimization in WasmEHPrepare
In every catchpad except `catch (...)`, we add a call to
`_Unwind_CallPersonality`, which is a wapper to call the personality
function. (In most of other Itanium-based architectures the call is done
from libunwind, but in wasm we don't have the control over the VM.)
Because the personatlity function is called to figure out whether the
current exception is a type we should catch, such as `int` or
`SomeClass&`, `catch (...)` does not need the personality function call.
For the same reason, all cleanuppads don't need it.
When we call `_Unwind_CallPersonality`, we store some necessary info in
a data structure called `__wasm_lpad_context` of type
`_Unwind_LandingPadContext`, which is defined in the wasm's port of
libunwind in Emscripten. Also the personality wrapper function returns
some info (selector and the caught pointer) in that data structure, so
it is used as a medium for communication.
One of the info we need to store is the address for LSDA info for the
current function. `wasm.lsda()` intrinsic returns that address. (This
intrinsic will be lowered to a symbol that points to the LSDA address.)
The simpliest thing is call `wasm.lsda()` every time we need to call
`_Unwind_CallPersonality` and store that info in `__wasm_lpad_context`
data structure. But we tried to be better than that (D77423 and some
more previous CLs), so if catchpad A dominates catchpad B and catchpad A
is not `catch (...)`, we didn't insert `wasm.lsda()` call in catchpad B,
thinking that the LSDA address is the same for a single function and we
already visited catchpad A and `__wasm_lpad_context.lsda` field would
already have that value.
But this can be incorrect if there is a call to another function, which
also can have the personality function and LSDA, between catchpad A and
catchpad B, because `__wasm_lpad_context` is a globally defined
structure and the callee function will overwrite its `lsda` field.
So in this CL we don't try to do any optimizaions on adding
`wasm.lsda()` call; we store the result of `wasm.lsda()` every time we
call `_Unwind_CallPersonality`. We can do some complicated analysis,
like checking if there is a function call between the dominating
catchpad and the current catchpad, but at this time it seems overkill.
This deletes three tests because they all tested `wasm.ldsa()` call
optimization.
Fixes https://github.com/emscripten-core/emscripten/issues/13548.
Reviewed By: tlively
Differential Revision: https://reviews.llvm.org/D97309
2021-02-24 03:00:11 +08:00
|
|
|
SmallVector<BasicBlock *, 16> CatchPads;
|
|
|
|
SmallVector<BasicBlock *, 16> CleanupPads;
|
|
|
|
for (BasicBlock &BB : F) {
|
|
|
|
if (!BB.isEHPad())
|
2018-06-01 06:02:34 +08:00
|
|
|
continue;
|
[WebAssembly] Disable wasm.lsda() optimization in WasmEHPrepare
In every catchpad except `catch (...)`, we add a call to
`_Unwind_CallPersonality`, which is a wapper to call the personality
function. (In most of other Itanium-based architectures the call is done
from libunwind, but in wasm we don't have the control over the VM.)
Because the personatlity function is called to figure out whether the
current exception is a type we should catch, such as `int` or
`SomeClass&`, `catch (...)` does not need the personality function call.
For the same reason, all cleanuppads don't need it.
When we call `_Unwind_CallPersonality`, we store some necessary info in
a data structure called `__wasm_lpad_context` of type
`_Unwind_LandingPadContext`, which is defined in the wasm's port of
libunwind in Emscripten. Also the personality wrapper function returns
some info (selector and the caught pointer) in that data structure, so
it is used as a medium for communication.
One of the info we need to store is the address for LSDA info for the
current function. `wasm.lsda()` intrinsic returns that address. (This
intrinsic will be lowered to a symbol that points to the LSDA address.)
The simpliest thing is call `wasm.lsda()` every time we need to call
`_Unwind_CallPersonality` and store that info in `__wasm_lpad_context`
data structure. But we tried to be better than that (D77423 and some
more previous CLs), so if catchpad A dominates catchpad B and catchpad A
is not `catch (...)`, we didn't insert `wasm.lsda()` call in catchpad B,
thinking that the LSDA address is the same for a single function and we
already visited catchpad A and `__wasm_lpad_context.lsda` field would
already have that value.
But this can be incorrect if there is a call to another function, which
also can have the personality function and LSDA, between catchpad A and
catchpad B, because `__wasm_lpad_context` is a globally defined
structure and the callee function will overwrite its `lsda` field.
So in this CL we don't try to do any optimizaions on adding
`wasm.lsda()` call; we store the result of `wasm.lsda()` every time we
call `_Unwind_CallPersonality`. We can do some complicated analysis,
like checking if there is a function call between the dominating
catchpad and the current catchpad, but at this time it seems overkill.
This deletes three tests because they all tested `wasm.ldsa()` call
optimization.
Fixes https://github.com/emscripten-core/emscripten/issues/13548.
Reviewed By: tlively
Differential Revision: https://reviews.llvm.org/D97309
2021-02-24 03:00:11 +08:00
|
|
|
auto *Pad = BB.getFirstNonPHI();
|
|
|
|
if (isa<CatchPadInst>(Pad))
|
|
|
|
CatchPads.push_back(&BB);
|
|
|
|
else if (isa<CleanupPadInst>(Pad))
|
|
|
|
CleanupPads.push_back(&BB);
|
2018-06-01 06:02:34 +08:00
|
|
|
}
|
[WebAssembly] Disable wasm.lsda() optimization in WasmEHPrepare
In every catchpad except `catch (...)`, we add a call to
`_Unwind_CallPersonality`, which is a wapper to call the personality
function. (In most of other Itanium-based architectures the call is done
from libunwind, but in wasm we don't have the control over the VM.)
Because the personatlity function is called to figure out whether the
current exception is a type we should catch, such as `int` or
`SomeClass&`, `catch (...)` does not need the personality function call.
For the same reason, all cleanuppads don't need it.
When we call `_Unwind_CallPersonality`, we store some necessary info in
a data structure called `__wasm_lpad_context` of type
`_Unwind_LandingPadContext`, which is defined in the wasm's port of
libunwind in Emscripten. Also the personality wrapper function returns
some info (selector and the caught pointer) in that data structure, so
it is used as a medium for communication.
One of the info we need to store is the address for LSDA info for the
current function. `wasm.lsda()` intrinsic returns that address. (This
intrinsic will be lowered to a symbol that points to the LSDA address.)
The simpliest thing is call `wasm.lsda()` every time we need to call
`_Unwind_CallPersonality` and store that info in `__wasm_lpad_context`
data structure. But we tried to be better than that (D77423 and some
more previous CLs), so if catchpad A dominates catchpad B and catchpad A
is not `catch (...)`, we didn't insert `wasm.lsda()` call in catchpad B,
thinking that the LSDA address is the same for a single function and we
already visited catchpad A and `__wasm_lpad_context.lsda` field would
already have that value.
But this can be incorrect if there is a call to another function, which
also can have the personality function and LSDA, between catchpad A and
catchpad B, because `__wasm_lpad_context` is a globally defined
structure and the callee function will overwrite its `lsda` field.
So in this CL we don't try to do any optimizaions on adding
`wasm.lsda()` call; we store the result of `wasm.lsda()` every time we
call `_Unwind_CallPersonality`. We can do some complicated analysis,
like checking if there is a function call between the dominating
catchpad and the current catchpad, but at this time it seems overkill.
This deletes three tests because they all tested `wasm.ldsa()` call
optimization.
Fixes https://github.com/emscripten-core/emscripten/issues/13548.
Reviewed By: tlively
Differential Revision: https://reviews.llvm.org/D97309
2021-02-24 03:00:11 +08:00
|
|
|
if (CatchPads.empty() && CleanupPads.empty())
|
|
|
|
return false;
|
2018-06-01 06:02:34 +08:00
|
|
|
|
|
|
|
assert(F.hasPersonalityFn() && "Personality function not found");
|
|
|
|
|
2022-02-15 07:13:07 +08:00
|
|
|
// __wasm_lpad_context global variable.
|
[WebAssembly] Make EH/SjLj vars unconditionally thread local
This makes three thread local variables (`__THREW__`, `__threwValue`,
and `__wasm_lpad_context`) unconditionally thread local. If the target
doesn't support TLS, they will be downgraded to normal variables in
`stripThreadLocals`. This makes the object not linkable with other
objects using shared memory, which is what we intend here; these
variables should be thread local when used with shared memory. This is
what we initially tried in D88262.
But D88323 changed this: It only created these variables when threads
were supported, because `__THREW__` and `__threwValue` were always
generated even if Emscripten EH/SjLj was not used, making all objects
built without threads not linkable with shared memory, which was too
restrictive. But sometimes this is not safe. If we build an object using
variables such as `__THREW__` without threads, it can be linked to other
objects using shared memory, because the original object's `__THREW__`
was not created thread local to begin with.
So this CL basically reverts D88323 with some additional improvements:
- This checks each of the functions and global variables created within
`LowerEmscriptenEHSjLj` pass and removes it if it's not used at the
end of the pass. So only modules using those variables will be
affected.
- Moves `CoalesceFeaturesAndStripAtomics` and `AtomicExpand` passes
after all other IR pasess that can create thread local variables. It
is not sufficient to move them to the end of `addIRPasses`, because
`__wasm_lpad_context` is created in `WasmEHPrepare`, which runs inside
`addPassesToHandleExceptions`, which runs before `addISelPrepare`. So
we override `addISelPrepare` and move atomic/TLS stripping and
expanding passes there.
This also removes merges `TLS` and `NO-TLS` FileCheck lines into one
`CHECK` line, because in the bitcode level we always create them as
thread local. Also some function declarations are deleted `CHECK` lines
because they are unused.
Reviewed By: tlively, sbc100
Differential Revision: https://reviews.llvm.org/D120013
2022-02-17 08:11:29 +08:00
|
|
|
// This variable should be thread local. If the target does not support TLS,
|
|
|
|
// we depend on CoalesceFeaturesAndStripAtomics to downgrade it to
|
|
|
|
// non-thread-local ones, in which case we don't allow this object to be
|
|
|
|
// linked with other objects using shared memory.
|
2018-06-01 06:02:34 +08:00
|
|
|
LPadContextGV = cast<GlobalVariable>(
|
|
|
|
M.getOrInsertGlobal("__wasm_lpad_context", LPadContextTy));
|
[WebAssembly] Make EH/SjLj vars unconditionally thread local
This makes three thread local variables (`__THREW__`, `__threwValue`,
and `__wasm_lpad_context`) unconditionally thread local. If the target
doesn't support TLS, they will be downgraded to normal variables in
`stripThreadLocals`. This makes the object not linkable with other
objects using shared memory, which is what we intend here; these
variables should be thread local when used with shared memory. This is
what we initially tried in D88262.
But D88323 changed this: It only created these variables when threads
were supported, because `__THREW__` and `__threwValue` were always
generated even if Emscripten EH/SjLj was not used, making all objects
built without threads not linkable with shared memory, which was too
restrictive. But sometimes this is not safe. If we build an object using
variables such as `__THREW__` without threads, it can be linked to other
objects using shared memory, because the original object's `__THREW__`
was not created thread local to begin with.
So this CL basically reverts D88323 with some additional improvements:
- This checks each of the functions and global variables created within
`LowerEmscriptenEHSjLj` pass and removes it if it's not used at the
end of the pass. So only modules using those variables will be
affected.
- Moves `CoalesceFeaturesAndStripAtomics` and `AtomicExpand` passes
after all other IR pasess that can create thread local variables. It
is not sufficient to move them to the end of `addIRPasses`, because
`__wasm_lpad_context` is created in `WasmEHPrepare`, which runs inside
`addPassesToHandleExceptions`, which runs before `addISelPrepare`. So
we override `addISelPrepare` and move atomic/TLS stripping and
expanding passes there.
This also removes merges `TLS` and `NO-TLS` FileCheck lines into one
`CHECK` line, because in the bitcode level we always create them as
thread local. Also some function declarations are deleted `CHECK` lines
because they are unused.
Reviewed By: tlively, sbc100
Differential Revision: https://reviews.llvm.org/D120013
2022-02-17 08:11:29 +08:00
|
|
|
LPadContextGV->setThreadLocalMode(GlobalValue::GeneralDynamicTLSModel);
|
2022-02-15 07:13:07 +08:00
|
|
|
|
2018-06-01 06:02:34 +08:00
|
|
|
LPadIndexField = IRB.CreateConstGEP2_32(LPadContextTy, LPadContextGV, 0, 0,
|
|
|
|
"lpad_index_gep");
|
|
|
|
LSDAField =
|
|
|
|
IRB.CreateConstGEP2_32(LPadContextTy, LPadContextGV, 0, 1, "lsda_gep");
|
|
|
|
SelectorField = IRB.CreateConstGEP2_32(LPadContextTy, LPadContextGV, 0, 2,
|
|
|
|
"selector_gep");
|
|
|
|
|
|
|
|
// wasm.landingpad.index() intrinsic, which is to specify landingpad index
|
|
|
|
LPadIndexF = Intrinsic::getDeclaration(&M, Intrinsic::wasm_landingpad_index);
|
|
|
|
// wasm.lsda() intrinsic. Returns the address of LSDA table for the current
|
|
|
|
// function.
|
|
|
|
LSDAF = Intrinsic::getDeclaration(&M, Intrinsic::wasm_lsda);
|
|
|
|
// wasm.get.exception() and wasm.get.ehselector() intrinsics. Calls to these
|
|
|
|
// are generated in clang.
|
|
|
|
GetExnF = Intrinsic::getDeclaration(&M, Intrinsic::wasm_get_exception);
|
|
|
|
GetSelectorF = Intrinsic::getDeclaration(&M, Intrinsic::wasm_get_ehselector);
|
|
|
|
|
2021-08-25 10:43:28 +08:00
|
|
|
// wasm.catch() will be lowered down to wasm 'catch' instruction in
|
[WebAssembly] Update WasmEHPrepare for the new spec
Clang generates `wasm.get.exception` and `wasm.get.ehselector`
intrinsics, which respectively return a caught exception value (a
pointer to some C++ exception struct) and a selector (an integer value
that tells which C++ `catch` clause the current exception matches, or
does not match any).
WasmEHPrepare is a pass that does some IR-level preparation before
instruction selection. Previously one of things we did in this pass was
to convert `wasm.get.exception` intrinsic calls to
`wasm.extract.exception` intrinsics. Their semantics were the same
except `wasm.extract.exception` did not have a token argument. We
maintained these two separate intrinsics with the same semantics because
instruction selection couldn't handle token arguments. This
`wasm.extract.exception` intrinsic was later converted to
`extract_exception` instruction in instruction selection, which was a
pseudo instruction to implement `br_on_exn`. Because `br_on_exn` pushed
an extracted value onto the value stack after the `end` instruction of a
`block`, but LLVM does not have a way of modeling that kind of behavior,
so this pseudo instruction was used to pull an extracted value out of
thin air, like this:
```
block $l0
...
br_on_exn $cpp_exception $l0
...
end
extract_exception ;; pushes values onto the stack
```
In the new spec, we don't need this pseudo instruction anymore because
`catch` itself returns a value and we don't have `br_on_exn` anymore. In
the spec `catch` returns multiple values (like `br_on_exn`), but here we
assume it only returns a single i32, which is sufficient to support C++.
So this renames `wasm.get.exception` intrinsic to `wasm.catch`. Because
this CL does not yet contain instruction selection for `wasm.catch`
intrinsic, all `RUN` lines in exception.ll, eh-lsda.ll, and
cfg-stackify-eh.ll, and a single `RUN` line in wasm-eh.cpp (which is an
end-to-end test from C++ source to assembly) fail. So this CL
temporarily disables those `RUN` lines, and for those test files without
any valid remaining `RUN` lines, adds a dummy `RUN` line to make them
pass. These tests will be reenabled in later CLs.
Reviewed By: dschuff, tlively
Differential Revision: https://reviews.llvm.org/D94039
2020-12-26 10:38:59 +08:00
|
|
|
// instruction selection.
|
2021-08-25 10:43:28 +08:00
|
|
|
CatchF = Intrinsic::getDeclaration(&M, Intrinsic::wasm_catch);
|
[WebAssembly] Exception handling: Switch to the new proposal
Summary:
This switches the EH implementation to the new proposal:
https://github.com/WebAssembly/exception-handling/blob/master/proposals/Exceptions.md
(The previous proposal was
https://github.com/WebAssembly/exception-handling/blob/master/proposals/old/Exceptions.md)
- Instruction changes
- Now we have one single `catch` instruction that returns a except_ref
value
- `throw` now can take variable number of operations
- `rethrow` does not have 'depth' argument anymore
- `br_on_exn` queries an except_ref to see if it matches the tag and
branches to the given label if true.
- `extract_exception` is a pseudo instruction that simulates popping
values from wasm stack. This is to make `br_on_exn`, a very special
instruction, work: `br_on_exn` puts values onto the stack only if it
is taken, and the # of values can vay depending on the tag.
- Now there's only one `catch` per `try`, this patch removes all special
handling for terminate pad with a call to `__clang_call_terminate`.
Before it was the only case there are two catch clauses (a normal
`catch` and `catch_all` per `try`).
- Make `rethrow` act as a terminator like `throw`. This splits BB after
`rethrow` in WasmEHPrepare, and deletes an unnecessary `unreachable`
after `rethrow` in LateEHPrepare.
- Now we stop at all catchpads (because we add wasm `catch` instruction
that catches all exceptions), this creates new
`findWasmUnwindDestinations` function in SelectionDAGBuilder.
- Now we use `br_on_exn` instrution to figure out if an except_ref
matches the current tag or not, LateEHPrepare generates this sequence
for catch pads:
```
catch
block i32
br_on_exn $__cpp_exception
end_block
extract_exception
```
- Branch analysis for `br_on_exn` in WebAssemblyInstrInfo
- Other various misc. changes to switch to the new proposal.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D57134
llvm-svn: 352598
2019-01-30 11:21:57 +08:00
|
|
|
|
2018-06-01 06:02:34 +08:00
|
|
|
// _Unwind_CallPersonality() wrapper function, which calls the personality
|
[opaque pointer types] Add a FunctionCallee wrapper type, and use it.
Recommit r352791 after tweaking DerivedTypes.h slightly, so that gcc
doesn't choke on it, hopefully.
Original Message:
The FunctionCallee type is effectively a {FunctionType*,Value*} pair,
and is a useful convenience to enable code to continue passing the
result of getOrInsertFunction() through to EmitCall, even once pointer
types lose their pointee-type.
Then:
- update the CallInst/InvokeInst instruction creation functions to
take a Callee,
- modify getOrInsertFunction to return FunctionCallee, and
- update all callers appropriately.
One area of particular note is the change to the sanitizer
code. Previously, they had been casting the result of
`getOrInsertFunction` to a `Function*` via
`checkSanitizerInterfaceFunction`, and storing that. That would report
an error if someone had already inserted a function declaraction with
a mismatching signature.
However, in general, LLVM allows for such mismatches, as
`getOrInsertFunction` will automatically insert a bitcast if
needed. As part of this cleanup, cause the sanitizer code to do the
same. (It will call its functions using the expected signature,
however they may have been declared.)
Finally, in a small number of locations, callers of
`getOrInsertFunction` actually were expecting/requiring that a brand
new function was being created. In such cases, I've switched them to
Function::Create instead.
Differential Revision: https://reviews.llvm.org/D57315
llvm-svn: 352827
2019-02-01 10:28:03 +08:00
|
|
|
CallPersonalityF = M.getOrInsertFunction(
|
|
|
|
"_Unwind_CallPersonality", IRB.getInt32Ty(), IRB.getInt8PtrTy());
|
|
|
|
if (Function *F = dyn_cast<Function>(CallPersonalityF.getCallee()))
|
|
|
|
F->setDoesNotThrow();
|
[WebAssembly] Disable wasm.lsda() optimization in WasmEHPrepare
In every catchpad except `catch (...)`, we add a call to
`_Unwind_CallPersonality`, which is a wapper to call the personality
function. (In most of other Itanium-based architectures the call is done
from libunwind, but in wasm we don't have the control over the VM.)
Because the personatlity function is called to figure out whether the
current exception is a type we should catch, such as `int` or
`SomeClass&`, `catch (...)` does not need the personality function call.
For the same reason, all cleanuppads don't need it.
When we call `_Unwind_CallPersonality`, we store some necessary info in
a data structure called `__wasm_lpad_context` of type
`_Unwind_LandingPadContext`, which is defined in the wasm's port of
libunwind in Emscripten. Also the personality wrapper function returns
some info (selector and the caught pointer) in that data structure, so
it is used as a medium for communication.
One of the info we need to store is the address for LSDA info for the
current function. `wasm.lsda()` intrinsic returns that address. (This
intrinsic will be lowered to a symbol that points to the LSDA address.)
The simpliest thing is call `wasm.lsda()` every time we need to call
`_Unwind_CallPersonality` and store that info in `__wasm_lpad_context`
data structure. But we tried to be better than that (D77423 and some
more previous CLs), so if catchpad A dominates catchpad B and catchpad A
is not `catch (...)`, we didn't insert `wasm.lsda()` call in catchpad B,
thinking that the LSDA address is the same for a single function and we
already visited catchpad A and `__wasm_lpad_context.lsda` field would
already have that value.
But this can be incorrect if there is a call to another function, which
also can have the personality function and LSDA, between catchpad A and
catchpad B, because `__wasm_lpad_context` is a globally defined
structure and the callee function will overwrite its `lsda` field.
So in this CL we don't try to do any optimizaions on adding
`wasm.lsda()` call; we store the result of `wasm.lsda()` every time we
call `_Unwind_CallPersonality`. We can do some complicated analysis,
like checking if there is a function call between the dominating
catchpad and the current catchpad, but at this time it seems overkill.
This deletes three tests because they all tested `wasm.ldsa()` call
optimization.
Fixes https://github.com/emscripten-core/emscripten/issues/13548.
Reviewed By: tlively
Differential Revision: https://reviews.llvm.org/D97309
2021-02-24 03:00:11 +08:00
|
|
|
|
|
|
|
unsigned Index = 0;
|
|
|
|
for (auto *BB : CatchPads) {
|
|
|
|
auto *CPI = cast<CatchPadInst>(BB->getFirstNonPHI());
|
|
|
|
// In case of a single catch (...), we don't need to emit a personalify
|
|
|
|
// function call
|
|
|
|
if (CPI->getNumArgOperands() == 1 &&
|
|
|
|
cast<Constant>(CPI->getArgOperand(0))->isNullValue())
|
|
|
|
prepareEHPad(BB, false);
|
|
|
|
else
|
|
|
|
prepareEHPad(BB, true, Index++);
|
|
|
|
}
|
|
|
|
|
|
|
|
// Cleanup pads don't need a personality function call.
|
|
|
|
for (auto *BB : CleanupPads)
|
|
|
|
prepareEHPad(BB, false);
|
|
|
|
|
|
|
|
return true;
|
2018-06-01 06:02:34 +08:00
|
|
|
}
|
|
|
|
|
[WebAssembly] Fix wasm.lsda() optimization in WasmEHPrepare
Summary:
When we insert a call to the personality function wrapper
(`_Unwind_CallPersonality`) for a catch pad, we store some necessary
info in `__wasm_lpad_context` struct and pass it. One of the info is the
LSDA address for the function. For this, we insert a call to
`wasm.lsda()`, which will be lowered down to the address of LSDA, and
store it in a field in `__wasm_lpad_context`.
There are exceptions to this personality call insertion: catchpads for
`catch (...)` and cleanuppads (for destructors) don't need personality
function calls, because we don't need to figure out whether the current
exception should be caught or not. (They always should.)
There was a little optimization to `wasm.lsda()` call insertion. Because
the LSDA address is the same throughout a function, we don't need to
insert a store of `wasm.lsda()` return value in every catchpad. For
example:
```
try {
foo();
} catch (int) {
// wasm.lsda() call and a store are inserted here, like, in
// pseudocode,
// %lsda = wasm.lsda();
// store %lsda to a field in __wasm_lpad_context
try {
foo();
} catch (int) {
// We don't need to insert the wasm.lsda() and store again, because
// to arrive here, we have already stored the LSDA address to
// __wasm_lpad_context in the outer catch.
}
}
```
So the previous algorithm checked if the current catch has a parent EH
pad, we didn't insert a call to `wasm.lsda()` and its store.
But this was incorrect, because what if the outer catch is `catch (...)`
or a cleanuppad?
```
try {
foo();
} catch (...) {
// wasm.lsda() call and a store are NOT inserted here
try {
foo();
} catch (int) {
// We need wasm.lsda() here!
}
}
```
In this case we need to insert `wasm.lsda()` in the inner catchpad,
because the outer catchpad does not have one.
To minimize the number of inserted `wasm.lsda()` calls and stores, we
need a way to figure out whether we have encountered `wasm.lsda()` call
in any of EH pads that dominates the current EH pad. To figure that
out, we now visit EH pads in BFS order in the dominator tree so that we
visit parent BBs first before visiting its child BBs in the domtree.
We keep a set named `ExecutedLSDA`, which basically means "Do we have
`wasm.lsda()` either in the current EH pad or any of its parent EH
pads in the dominator tree?". This is to prevent scanning the domtree up
to the root in the worst case every time we examine an EH pad: each EH
pad only needs to examine its immediate parent EH pad.
- If any of its parent EH pads in the domtree has `wasm.lsda()`, this
means we don't need `wasm.lsda()` in the current EH pad. We also insert
the current EH pad in `ExecutedLSDA` set.
- If none of its parent EH pad has `wasm.lsda()`
- If the current EH pad is a `catch (...)` or a cleanuppad, done.
- If the current EH pad is neither a `catch (...)` nor a cleanuppad,
add `wasm.lsda()` and the store in the current EH pad, and add the
current EH pad to `ExecutedLSDA` set.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77423
2020-04-01 07:08:01 +08:00
|
|
|
// Prepare an EH pad for Wasm EH handling. If NeedPersonality is false, Index is
|
[WebAssembly] Exception handling: Switch to the new proposal
Summary:
This switches the EH implementation to the new proposal:
https://github.com/WebAssembly/exception-handling/blob/master/proposals/Exceptions.md
(The previous proposal was
https://github.com/WebAssembly/exception-handling/blob/master/proposals/old/Exceptions.md)
- Instruction changes
- Now we have one single `catch` instruction that returns a except_ref
value
- `throw` now can take variable number of operations
- `rethrow` does not have 'depth' argument anymore
- `br_on_exn` queries an except_ref to see if it matches the tag and
branches to the given label if true.
- `extract_exception` is a pseudo instruction that simulates popping
values from wasm stack. This is to make `br_on_exn`, a very special
instruction, work: `br_on_exn` puts values onto the stack only if it
is taken, and the # of values can vay depending on the tag.
- Now there's only one `catch` per `try`, this patch removes all special
handling for terminate pad with a call to `__clang_call_terminate`.
Before it was the only case there are two catch clauses (a normal
`catch` and `catch_all` per `try`).
- Make `rethrow` act as a terminator like `throw`. This splits BB after
`rethrow` in WasmEHPrepare, and deletes an unnecessary `unreachable`
after `rethrow` in LateEHPrepare.
- Now we stop at all catchpads (because we add wasm `catch` instruction
that catches all exceptions), this creates new
`findWasmUnwindDestinations` function in SelectionDAGBuilder.
- Now we use `br_on_exn` instrution to figure out if an except_ref
matches the current tag or not, LateEHPrepare generates this sequence
for catch pads:
```
catch
block i32
br_on_exn $__cpp_exception
end_block
extract_exception
```
- Branch analysis for `br_on_exn` in WebAssemblyInstrInfo
- Other various misc. changes to switch to the new proposal.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D57134
llvm-svn: 352598
2019-01-30 11:21:57 +08:00
|
|
|
// ignored.
|
[WebAssembly] Fix wasm.lsda() optimization in WasmEHPrepare
Summary:
When we insert a call to the personality function wrapper
(`_Unwind_CallPersonality`) for a catch pad, we store some necessary
info in `__wasm_lpad_context` struct and pass it. One of the info is the
LSDA address for the function. For this, we insert a call to
`wasm.lsda()`, which will be lowered down to the address of LSDA, and
store it in a field in `__wasm_lpad_context`.
There are exceptions to this personality call insertion: catchpads for
`catch (...)` and cleanuppads (for destructors) don't need personality
function calls, because we don't need to figure out whether the current
exception should be caught or not. (They always should.)
There was a little optimization to `wasm.lsda()` call insertion. Because
the LSDA address is the same throughout a function, we don't need to
insert a store of `wasm.lsda()` return value in every catchpad. For
example:
```
try {
foo();
} catch (int) {
// wasm.lsda() call and a store are inserted here, like, in
// pseudocode,
// %lsda = wasm.lsda();
// store %lsda to a field in __wasm_lpad_context
try {
foo();
} catch (int) {
// We don't need to insert the wasm.lsda() and store again, because
// to arrive here, we have already stored the LSDA address to
// __wasm_lpad_context in the outer catch.
}
}
```
So the previous algorithm checked if the current catch has a parent EH
pad, we didn't insert a call to `wasm.lsda()` and its store.
But this was incorrect, because what if the outer catch is `catch (...)`
or a cleanuppad?
```
try {
foo();
} catch (...) {
// wasm.lsda() call and a store are NOT inserted here
try {
foo();
} catch (int) {
// We need wasm.lsda() here!
}
}
```
In this case we need to insert `wasm.lsda()` in the inner catchpad,
because the outer catchpad does not have one.
To minimize the number of inserted `wasm.lsda()` calls and stores, we
need a way to figure out whether we have encountered `wasm.lsda()` call
in any of EH pads that dominates the current EH pad. To figure that
out, we now visit EH pads in BFS order in the dominator tree so that we
visit parent BBs first before visiting its child BBs in the domtree.
We keep a set named `ExecutedLSDA`, which basically means "Do we have
`wasm.lsda()` either in the current EH pad or any of its parent EH
pads in the dominator tree?". This is to prevent scanning the domtree up
to the root in the worst case every time we examine an EH pad: each EH
pad only needs to examine its immediate parent EH pad.
- If any of its parent EH pads in the domtree has `wasm.lsda()`, this
means we don't need `wasm.lsda()` in the current EH pad. We also insert
the current EH pad in `ExecutedLSDA` set.
- If none of its parent EH pad has `wasm.lsda()`
- If the current EH pad is a `catch (...)` or a cleanuppad, done.
- If the current EH pad is neither a `catch (...)` nor a cleanuppad,
add `wasm.lsda()` and the store in the current EH pad, and add the
current EH pad to `ExecutedLSDA` set.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77423
2020-04-01 07:08:01 +08:00
|
|
|
void WasmEHPrepare::prepareEHPad(BasicBlock *BB, bool NeedPersonality,
|
[WebAssembly] Disable wasm.lsda() optimization in WasmEHPrepare
In every catchpad except `catch (...)`, we add a call to
`_Unwind_CallPersonality`, which is a wapper to call the personality
function. (In most of other Itanium-based architectures the call is done
from libunwind, but in wasm we don't have the control over the VM.)
Because the personatlity function is called to figure out whether the
current exception is a type we should catch, such as `int` or
`SomeClass&`, `catch (...)` does not need the personality function call.
For the same reason, all cleanuppads don't need it.
When we call `_Unwind_CallPersonality`, we store some necessary info in
a data structure called `__wasm_lpad_context` of type
`_Unwind_LandingPadContext`, which is defined in the wasm's port of
libunwind in Emscripten. Also the personality wrapper function returns
some info (selector and the caught pointer) in that data structure, so
it is used as a medium for communication.
One of the info we need to store is the address for LSDA info for the
current function. `wasm.lsda()` intrinsic returns that address. (This
intrinsic will be lowered to a symbol that points to the LSDA address.)
The simpliest thing is call `wasm.lsda()` every time we need to call
`_Unwind_CallPersonality` and store that info in `__wasm_lpad_context`
data structure. But we tried to be better than that (D77423 and some
more previous CLs), so if catchpad A dominates catchpad B and catchpad A
is not `catch (...)`, we didn't insert `wasm.lsda()` call in catchpad B,
thinking that the LSDA address is the same for a single function and we
already visited catchpad A and `__wasm_lpad_context.lsda` field would
already have that value.
But this can be incorrect if there is a call to another function, which
also can have the personality function and LSDA, between catchpad A and
catchpad B, because `__wasm_lpad_context` is a globally defined
structure and the callee function will overwrite its `lsda` field.
So in this CL we don't try to do any optimizaions on adding
`wasm.lsda()` call; we store the result of `wasm.lsda()` every time we
call `_Unwind_CallPersonality`. We can do some complicated analysis,
like checking if there is a function call between the dominating
catchpad and the current catchpad, but at this time it seems overkill.
This deletes three tests because they all tested `wasm.ldsa()` call
optimization.
Fixes https://github.com/emscripten-core/emscripten/issues/13548.
Reviewed By: tlively
Differential Revision: https://reviews.llvm.org/D97309
2021-02-24 03:00:11 +08:00
|
|
|
unsigned Index) {
|
2018-06-01 06:02:34 +08:00
|
|
|
assert(BB->isEHPad() && "BB is not an EHPad!");
|
|
|
|
IRBuilder<> IRB(BB->getContext());
|
|
|
|
IRB.SetInsertPoint(&*BB->getFirstInsertionPt());
|
[WebAssembly] Exception handling: Switch to the new proposal
Summary:
This switches the EH implementation to the new proposal:
https://github.com/WebAssembly/exception-handling/blob/master/proposals/Exceptions.md
(The previous proposal was
https://github.com/WebAssembly/exception-handling/blob/master/proposals/old/Exceptions.md)
- Instruction changes
- Now we have one single `catch` instruction that returns a except_ref
value
- `throw` now can take variable number of operations
- `rethrow` does not have 'depth' argument anymore
- `br_on_exn` queries an except_ref to see if it matches the tag and
branches to the given label if true.
- `extract_exception` is a pseudo instruction that simulates popping
values from wasm stack. This is to make `br_on_exn`, a very special
instruction, work: `br_on_exn` puts values onto the stack only if it
is taken, and the # of values can vay depending on the tag.
- Now there's only one `catch` per `try`, this patch removes all special
handling for terminate pad with a call to `__clang_call_terminate`.
Before it was the only case there are two catch clauses (a normal
`catch` and `catch_all` per `try`).
- Make `rethrow` act as a terminator like `throw`. This splits BB after
`rethrow` in WasmEHPrepare, and deletes an unnecessary `unreachable`
after `rethrow` in LateEHPrepare.
- Now we stop at all catchpads (because we add wasm `catch` instruction
that catches all exceptions), this creates new
`findWasmUnwindDestinations` function in SelectionDAGBuilder.
- Now we use `br_on_exn` instrution to figure out if an except_ref
matches the current tag or not, LateEHPrepare generates this sequence
for catch pads:
```
catch
block i32
br_on_exn $__cpp_exception
end_block
extract_exception
```
- Branch analysis for `br_on_exn` in WebAssemblyInstrInfo
- Other various misc. changes to switch to the new proposal.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D57134
llvm-svn: 352598
2019-01-30 11:21:57 +08:00
|
|
|
|
2018-06-01 06:02:34 +08:00
|
|
|
auto *FPI = cast<FuncletPadInst>(BB->getFirstNonPHI());
|
|
|
|
Instruction *GetExnCI = nullptr, *GetSelectorCI = nullptr;
|
|
|
|
for (auto &U : FPI->uses()) {
|
|
|
|
if (auto *CI = dyn_cast<CallInst>(U.getUser())) {
|
2020-04-28 11:15:59 +08:00
|
|
|
if (CI->getCalledOperand() == GetExnF)
|
2018-06-01 06:02:34 +08:00
|
|
|
GetExnCI = CI;
|
2020-04-28 11:15:59 +08:00
|
|
|
if (CI->getCalledOperand() == GetSelectorF)
|
2018-06-01 06:02:34 +08:00
|
|
|
GetSelectorCI = CI;
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
[WebAssembly] Disable uses of __clang_call_terminate
Background:
Wasm EH, while using Windows EH (catchpad/cleanuppad based) IR, uses
Itanium-based libraries and ABIs with some modifications.
`__clang_call_terminate` is a wrapper generated in Clang's Itanium C++
ABI implementation. It contains this code, in C-style pseudocode:
```
void __clang_call_terminate(void *exn) {
__cxa_begin_catch(exn);
std::terminate();
}
```
So this function is a wrapper to call `__cxa_begin_catch` on the
exception pointer before termination.
In Itanium ABI, this function is called when another exception is thrown
while processing an exception. The pointer for this second, violating
exception is passed as the argument of this `__clang_call_terminate`,
which calls `__cxa_begin_catch` with that pointer and calls
`std::terminate` to terminate the program.
The spec (https://libcxxabi.llvm.org/spec.html) for `__cxa_begin_catch`
says,
```
When the personality routine encounters a termination condition, it
will call __cxa_begin_catch() to mark the exception as handled and then
call terminate(), which shall not return to its caller.
```
In wasm EH's Clang implementation, this function is called from
cleanuppads that terminates the program, which we also call terminate
pads. Cleanuppads normally don't access the thrown exception and the
wasm backend converts them to `catch_all` blocks. But because we need
the exception pointer in this cleanuppad, we generate
`wasm.get.exception` intrinsic (which will eventually be lowered to
`catch` instruction) as we do in the catchpads. But because terminate
pads are cleanup pads and should run even when a foreign exception is
thrown, so what we have been doing is:
1. In `WebAssemblyLateEHPrepare::ensureSingleBBTermPads()`, we make sure
terminate pads are in this simple shape:
```
%exn = catch
call @__clang_call_terminate(%exn)
unreachable
```
2. In `WebAssemblyHandleEHTerminatePads` pass at the end of the
pipeline, we attach a `catch_all` to terminate pads, so they will be in
this form:
```
%exn = catch
call @__clang_call_terminate(%exn)
unreachable
catch_all
call @std::terminate()
unreachable
```
In `catch_all` part, we don't have the exception pointer, so we call
`std::terminate()` directly. The reason we ran HandleEHTerminatePads at
the end of the pipeline, separate from LateEHPrepare, was it was
convenient to assume there was only a single `catch` part per `try`
during CFGSort and CFGStackify.
---
Problem:
While it thinks terminate pads could have been possibly split or calls
to `__clang_call_terminate` could have been duplicated,
`WebAssemblyLateEHPrepare::ensureSingleBBTermPads()` assumes terminate
pads contain no more than calls to `__clang_call_terminate` and
`unreachable` instruction. I assumed that because in LLVM very limited
forms of transformations are done to catchpads and cleanuppads to
maintain the scoping structure. But it turned out to be incorrect;
passes can merge cleanuppads into one, including terminate pads, as long
as the new code has a correct scoping structure. One pass that does this
I observed was `SimplifyCFG`, but there can be more. After this
transformation, a single cleanuppad can contain any number of other
instructions with the call to `__clang_call_terminate` and can span many
BBs. It wouldn't be practical to duplicate all these BBs within the
cleanuppad to generate the equivalent `catch_all` blocks, only with
calls to `__clang_call_terminate` replaced by calls to `std::terminate`.
Unless we do more complicated transformation to split those calls to
`__clang_call_terminate` into a separate cleanuppad, it is tricky to
solve.
---
Solution (?):
This CL just disables the generation and use of `__clang_call_terminate`
and calls `std::terminate()` directly in its place.
The possible downside of this approach can be, because the Itanium ABI
intended to "mark" the violating exception handled, we don't do that
anymore. What `__cxa_begin_catch` actually does is increment the
exception's handler count and decrement the uncaught exception count,
which in my opinion do not matter much given that we are about to
terminate the program anyway. Also it does not affect info like stack
traces that can be possibly shown to developers.
And while we use a variant of Itanium EH ABI, we can make some
deviations if we choose to; we are already different in that in the
current version of the EH spec we don't support two-phase unwinding. We
can possibly consider a more complicated transformation later to
reenable this, but I don't think that has high priority.
Changes in this CL contains:
- In Clang, we don't generate a call to `wasm.get.exception()` intrinsic
and `__clang_call_terminate` function in terminate pads anymore; we
simply generate calls to `std::terminate()`, which is the default
implementation of `CGCXXABI::emitTerminateForUnexpectedException`.
- Remove `WebAssembly::ensureSingleBBTermPads() function and
`WebAssemblyHandleEHTerminatePads` pass, because terminate pads are
already `catch_all` now (because they don't need the exception
pointer) and we don't need these transformations anymore.
- Change tests to use `std::terminate` directly. Also removes tests that
tested `LateEHPrepare::ensureSingleBBTermPads` and
`HandleEHTerminatePads` pass.
- Drive-by fix: Add some function attributes to EH intrinsic
declarations
Fixes https://github.com/emscripten-core/emscripten/issues/13582.
Reviewed By: dschuff, tlively
Differential Revision: https://reviews.llvm.org/D97834
2021-03-03 07:05:30 +08:00
|
|
|
// Cleanup pads do not have any of wasm.get.exception() or
|
|
|
|
// wasm.get.ehselector() calls. We need to do nothing.
|
[WebAssembly] Exception handling: Switch to the new proposal
Summary:
This switches the EH implementation to the new proposal:
https://github.com/WebAssembly/exception-handling/blob/master/proposals/Exceptions.md
(The previous proposal was
https://github.com/WebAssembly/exception-handling/blob/master/proposals/old/Exceptions.md)
- Instruction changes
- Now we have one single `catch` instruction that returns a except_ref
value
- `throw` now can take variable number of operations
- `rethrow` does not have 'depth' argument anymore
- `br_on_exn` queries an except_ref to see if it matches the tag and
branches to the given label if true.
- `extract_exception` is a pseudo instruction that simulates popping
values from wasm stack. This is to make `br_on_exn`, a very special
instruction, work: `br_on_exn` puts values onto the stack only if it
is taken, and the # of values can vay depending on the tag.
- Now there's only one `catch` per `try`, this patch removes all special
handling for terminate pad with a call to `__clang_call_terminate`.
Before it was the only case there are two catch clauses (a normal
`catch` and `catch_all` per `try`).
- Make `rethrow` act as a terminator like `throw`. This splits BB after
`rethrow` in WasmEHPrepare, and deletes an unnecessary `unreachable`
after `rethrow` in LateEHPrepare.
- Now we stop at all catchpads (because we add wasm `catch` instruction
that catches all exceptions), this creates new
`findWasmUnwindDestinations` function in SelectionDAGBuilder.
- Now we use `br_on_exn` instrution to figure out if an except_ref
matches the current tag or not, LateEHPrepare generates this sequence
for catch pads:
```
catch
block i32
br_on_exn $__cpp_exception
end_block
extract_exception
```
- Branch analysis for `br_on_exn` in WebAssemblyInstrInfo
- Other various misc. changes to switch to the new proposal.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D57134
llvm-svn: 352598
2019-01-30 11:21:57 +08:00
|
|
|
if (!GetExnCI) {
|
|
|
|
assert(!GetSelectorCI &&
|
|
|
|
"wasm.get.ehselector() cannot exist w/o wasm.get.exception()");
|
|
|
|
return;
|
|
|
|
}
|
|
|
|
|
2021-08-25 10:43:28 +08:00
|
|
|
// Replace wasm.get.exception intrinsic with wasm.catch intrinsic, which will
|
|
|
|
// be lowered to wasm 'catch' instruction. We do this mainly because
|
[WebAssembly] Update WasmEHPrepare for the new spec
Clang generates `wasm.get.exception` and `wasm.get.ehselector`
intrinsics, which respectively return a caught exception value (a
pointer to some C++ exception struct) and a selector (an integer value
that tells which C++ `catch` clause the current exception matches, or
does not match any).
WasmEHPrepare is a pass that does some IR-level preparation before
instruction selection. Previously one of things we did in this pass was
to convert `wasm.get.exception` intrinsic calls to
`wasm.extract.exception` intrinsics. Their semantics were the same
except `wasm.extract.exception` did not have a token argument. We
maintained these two separate intrinsics with the same semantics because
instruction selection couldn't handle token arguments. This
`wasm.extract.exception` intrinsic was later converted to
`extract_exception` instruction in instruction selection, which was a
pseudo instruction to implement `br_on_exn`. Because `br_on_exn` pushed
an extracted value onto the value stack after the `end` instruction of a
`block`, but LLVM does not have a way of modeling that kind of behavior,
so this pseudo instruction was used to pull an extracted value out of
thin air, like this:
```
block $l0
...
br_on_exn $cpp_exception $l0
...
end
extract_exception ;; pushes values onto the stack
```
In the new spec, we don't need this pseudo instruction anymore because
`catch` itself returns a value and we don't have `br_on_exn` anymore. In
the spec `catch` returns multiple values (like `br_on_exn`), but here we
assume it only returns a single i32, which is sufficient to support C++.
So this renames `wasm.get.exception` intrinsic to `wasm.catch`. Because
this CL does not yet contain instruction selection for `wasm.catch`
intrinsic, all `RUN` lines in exception.ll, eh-lsda.ll, and
cfg-stackify-eh.ll, and a single `RUN` line in wasm-eh.cpp (which is an
end-to-end test from C++ source to assembly) fail. So this CL
temporarily disables those `RUN` lines, and for those test files without
any valid remaining `RUN` lines, adds a dummy `RUN` line to make them
pass. These tests will be reenabled in later CLs.
Reviewed By: dschuff, tlively
Differential Revision: https://reviews.llvm.org/D94039
2020-12-26 10:38:59 +08:00
|
|
|
// instruction selection cannot handle wasm.get.exception intrinsic's token
|
|
|
|
// argument.
|
|
|
|
Instruction *CatchCI =
|
|
|
|
IRB.CreateCall(CatchF, {IRB.getInt32(WebAssembly::CPP_EXCEPTION)}, "exn");
|
|
|
|
GetExnCI->replaceAllUsesWith(CatchCI);
|
2018-06-01 06:02:34 +08:00
|
|
|
GetExnCI->eraseFromParent();
|
|
|
|
|
|
|
|
// In case it is a catchpad with single catch (...) or a cleanuppad, we don't
|
|
|
|
// need to call personality function because we don't need a selector.
|
[WebAssembly] Fix wasm.lsda() optimization in WasmEHPrepare
Summary:
When we insert a call to the personality function wrapper
(`_Unwind_CallPersonality`) for a catch pad, we store some necessary
info in `__wasm_lpad_context` struct and pass it. One of the info is the
LSDA address for the function. For this, we insert a call to
`wasm.lsda()`, which will be lowered down to the address of LSDA, and
store it in a field in `__wasm_lpad_context`.
There are exceptions to this personality call insertion: catchpads for
`catch (...)` and cleanuppads (for destructors) don't need personality
function calls, because we don't need to figure out whether the current
exception should be caught or not. (They always should.)
There was a little optimization to `wasm.lsda()` call insertion. Because
the LSDA address is the same throughout a function, we don't need to
insert a store of `wasm.lsda()` return value in every catchpad. For
example:
```
try {
foo();
} catch (int) {
// wasm.lsda() call and a store are inserted here, like, in
// pseudocode,
// %lsda = wasm.lsda();
// store %lsda to a field in __wasm_lpad_context
try {
foo();
} catch (int) {
// We don't need to insert the wasm.lsda() and store again, because
// to arrive here, we have already stored the LSDA address to
// __wasm_lpad_context in the outer catch.
}
}
```
So the previous algorithm checked if the current catch has a parent EH
pad, we didn't insert a call to `wasm.lsda()` and its store.
But this was incorrect, because what if the outer catch is `catch (...)`
or a cleanuppad?
```
try {
foo();
} catch (...) {
// wasm.lsda() call and a store are NOT inserted here
try {
foo();
} catch (int) {
// We need wasm.lsda() here!
}
}
```
In this case we need to insert `wasm.lsda()` in the inner catchpad,
because the outer catchpad does not have one.
To minimize the number of inserted `wasm.lsda()` calls and stores, we
need a way to figure out whether we have encountered `wasm.lsda()` call
in any of EH pads that dominates the current EH pad. To figure that
out, we now visit EH pads in BFS order in the dominator tree so that we
visit parent BBs first before visiting its child BBs in the domtree.
We keep a set named `ExecutedLSDA`, which basically means "Do we have
`wasm.lsda()` either in the current EH pad or any of its parent EH
pads in the dominator tree?". This is to prevent scanning the domtree up
to the root in the worst case every time we examine an EH pad: each EH
pad only needs to examine its immediate parent EH pad.
- If any of its parent EH pads in the domtree has `wasm.lsda()`, this
means we don't need `wasm.lsda()` in the current EH pad. We also insert
the current EH pad in `ExecutedLSDA` set.
- If none of its parent EH pad has `wasm.lsda()`
- If the current EH pad is a `catch (...)` or a cleanuppad, done.
- If the current EH pad is neither a `catch (...)` nor a cleanuppad,
add `wasm.lsda()` and the store in the current EH pad, and add the
current EH pad to `ExecutedLSDA` set.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77423
2020-04-01 07:08:01 +08:00
|
|
|
if (!NeedPersonality) {
|
2018-06-01 06:02:34 +08:00
|
|
|
if (GetSelectorCI) {
|
|
|
|
assert(GetSelectorCI->use_empty() &&
|
|
|
|
"wasm.get.ehselector() still has uses!");
|
|
|
|
GetSelectorCI->eraseFromParent();
|
|
|
|
}
|
|
|
|
return;
|
|
|
|
}
|
[WebAssembly] Update WasmEHPrepare for the new spec
Clang generates `wasm.get.exception` and `wasm.get.ehselector`
intrinsics, which respectively return a caught exception value (a
pointer to some C++ exception struct) and a selector (an integer value
that tells which C++ `catch` clause the current exception matches, or
does not match any).
WasmEHPrepare is a pass that does some IR-level preparation before
instruction selection. Previously one of things we did in this pass was
to convert `wasm.get.exception` intrinsic calls to
`wasm.extract.exception` intrinsics. Their semantics were the same
except `wasm.extract.exception` did not have a token argument. We
maintained these two separate intrinsics with the same semantics because
instruction selection couldn't handle token arguments. This
`wasm.extract.exception` intrinsic was later converted to
`extract_exception` instruction in instruction selection, which was a
pseudo instruction to implement `br_on_exn`. Because `br_on_exn` pushed
an extracted value onto the value stack after the `end` instruction of a
`block`, but LLVM does not have a way of modeling that kind of behavior,
so this pseudo instruction was used to pull an extracted value out of
thin air, like this:
```
block $l0
...
br_on_exn $cpp_exception $l0
...
end
extract_exception ;; pushes values onto the stack
```
In the new spec, we don't need this pseudo instruction anymore because
`catch` itself returns a value and we don't have `br_on_exn` anymore. In
the spec `catch` returns multiple values (like `br_on_exn`), but here we
assume it only returns a single i32, which is sufficient to support C++.
So this renames `wasm.get.exception` intrinsic to `wasm.catch`. Because
this CL does not yet contain instruction selection for `wasm.catch`
intrinsic, all `RUN` lines in exception.ll, eh-lsda.ll, and
cfg-stackify-eh.ll, and a single `RUN` line in wasm-eh.cpp (which is an
end-to-end test from C++ source to assembly) fail. So this CL
temporarily disables those `RUN` lines, and for those test files without
any valid remaining `RUN` lines, adds a dummy `RUN` line to make them
pass. These tests will be reenabled in later CLs.
Reviewed By: dschuff, tlively
Differential Revision: https://reviews.llvm.org/D94039
2020-12-26 10:38:59 +08:00
|
|
|
IRB.SetInsertPoint(CatchCI->getNextNode());
|
2018-06-01 06:02:34 +08:00
|
|
|
|
|
|
|
// This is to create a map of <landingpad EH label, landingpad index> in
|
|
|
|
// SelectionDAGISel, which is to be used in EHStreamer to emit LSDA tables.
|
|
|
|
// Pseudocode: wasm.landingpad.index(Index);
|
Reland "[WebAssembly] LSDA info generation"
Summary:
This adds support for LSDA (exception table) generation for wasm EH.
Wasm EH mostly follows the structure of Itanium-style exception tables,
with one exception: a call site table entry in wasm EH corresponds to
not a call site but a landing pad.
In wasm EH, the VM is responsible for stack unwinding. After an
exception occurs and the stack is unwound, the control flow is
transferred to wasm 'catch' instruction by the VM, after which the
personality function is called from the compiler-generated code. (Refer
to WasmEHPrepare pass for more information on this part.)
This patch:
- Changes wasm.landingpad.index intrinsic to take a token argument, to
make this 1:1 match with a catchpad instruction
- Stores landingpad index info and catch type info MachineFunction in
before instruction selection
- Lowers wasm.lsda intrinsic to an MCSymbol pointing to the start of an
exception table
- Adds WasmException class with overridden methods for table generation
- Adds support for LSDA section in Wasm object writer
Reviewers: dschuff, sbc100, rnk
Subscribers: mgorny, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D52748
llvm-svn: 345345
2018-10-26 07:55:10 +08:00
|
|
|
IRB.CreateCall(LPadIndexF, {FPI, IRB.getInt32(Index)});
|
2018-06-01 06:02:34 +08:00
|
|
|
|
|
|
|
// Pseudocode: __wasm_lpad_context.lpad_index = index;
|
|
|
|
IRB.CreateStore(IRB.getInt32(Index), LPadIndexField);
|
|
|
|
|
|
|
|
auto *CPI = cast<CatchPadInst>(FPI);
|
[WebAssembly] Disable wasm.lsda() optimization in WasmEHPrepare
In every catchpad except `catch (...)`, we add a call to
`_Unwind_CallPersonality`, which is a wapper to call the personality
function. (In most of other Itanium-based architectures the call is done
from libunwind, but in wasm we don't have the control over the VM.)
Because the personatlity function is called to figure out whether the
current exception is a type we should catch, such as `int` or
`SomeClass&`, `catch (...)` does not need the personality function call.
For the same reason, all cleanuppads don't need it.
When we call `_Unwind_CallPersonality`, we store some necessary info in
a data structure called `__wasm_lpad_context` of type
`_Unwind_LandingPadContext`, which is defined in the wasm's port of
libunwind in Emscripten. Also the personality wrapper function returns
some info (selector and the caught pointer) in that data structure, so
it is used as a medium for communication.
One of the info we need to store is the address for LSDA info for the
current function. `wasm.lsda()` intrinsic returns that address. (This
intrinsic will be lowered to a symbol that points to the LSDA address.)
The simpliest thing is call `wasm.lsda()` every time we need to call
`_Unwind_CallPersonality` and store that info in `__wasm_lpad_context`
data structure. But we tried to be better than that (D77423 and some
more previous CLs), so if catchpad A dominates catchpad B and catchpad A
is not `catch (...)`, we didn't insert `wasm.lsda()` call in catchpad B,
thinking that the LSDA address is the same for a single function and we
already visited catchpad A and `__wasm_lpad_context.lsda` field would
already have that value.
But this can be incorrect if there is a call to another function, which
also can have the personality function and LSDA, between catchpad A and
catchpad B, because `__wasm_lpad_context` is a globally defined
structure and the callee function will overwrite its `lsda` field.
So in this CL we don't try to do any optimizaions on adding
`wasm.lsda()` call; we store the result of `wasm.lsda()` every time we
call `_Unwind_CallPersonality`. We can do some complicated analysis,
like checking if there is a function call between the dominating
catchpad and the current catchpad, but at this time it seems overkill.
This deletes three tests because they all tested `wasm.ldsa()` call
optimization.
Fixes https://github.com/emscripten-core/emscripten/issues/13548.
Reviewed By: tlively
Differential Revision: https://reviews.llvm.org/D97309
2021-02-24 03:00:11 +08:00
|
|
|
// TODO Sometimes storing the LSDA address every time is not necessary, in
|
|
|
|
// case it is already set in a dominating EH pad and there is no function call
|
|
|
|
// between from that EH pad to here. Consider optimizing those cases.
|
|
|
|
// Pseudocode: __wasm_lpad_context.lsda = wasm.lsda();
|
|
|
|
IRB.CreateStore(IRB.CreateCall(LSDAF), LSDAField);
|
2018-06-01 06:02:34 +08:00
|
|
|
|
|
|
|
// Pseudocode: _Unwind_CallPersonality(exn);
|
[WebAssembly] Update WasmEHPrepare for the new spec
Clang generates `wasm.get.exception` and `wasm.get.ehselector`
intrinsics, which respectively return a caught exception value (a
pointer to some C++ exception struct) and a selector (an integer value
that tells which C++ `catch` clause the current exception matches, or
does not match any).
WasmEHPrepare is a pass that does some IR-level preparation before
instruction selection. Previously one of things we did in this pass was
to convert `wasm.get.exception` intrinsic calls to
`wasm.extract.exception` intrinsics. Their semantics were the same
except `wasm.extract.exception` did not have a token argument. We
maintained these two separate intrinsics with the same semantics because
instruction selection couldn't handle token arguments. This
`wasm.extract.exception` intrinsic was later converted to
`extract_exception` instruction in instruction selection, which was a
pseudo instruction to implement `br_on_exn`. Because `br_on_exn` pushed
an extracted value onto the value stack after the `end` instruction of a
`block`, but LLVM does not have a way of modeling that kind of behavior,
so this pseudo instruction was used to pull an extracted value out of
thin air, like this:
```
block $l0
...
br_on_exn $cpp_exception $l0
...
end
extract_exception ;; pushes values onto the stack
```
In the new spec, we don't need this pseudo instruction anymore because
`catch` itself returns a value and we don't have `br_on_exn` anymore. In
the spec `catch` returns multiple values (like `br_on_exn`), but here we
assume it only returns a single i32, which is sufficient to support C++.
So this renames `wasm.get.exception` intrinsic to `wasm.catch`. Because
this CL does not yet contain instruction selection for `wasm.catch`
intrinsic, all `RUN` lines in exception.ll, eh-lsda.ll, and
cfg-stackify-eh.ll, and a single `RUN` line in wasm-eh.cpp (which is an
end-to-end test from C++ source to assembly) fail. So this CL
temporarily disables those `RUN` lines, and for those test files without
any valid remaining `RUN` lines, adds a dummy `RUN` line to make them
pass. These tests will be reenabled in later CLs.
Reviewed By: dschuff, tlively
Differential Revision: https://reviews.llvm.org/D94039
2020-12-26 10:38:59 +08:00
|
|
|
CallInst *PersCI = IRB.CreateCall(CallPersonalityF, CatchCI,
|
[WebAssembly] Exception handling: Switch to the new proposal
Summary:
This switches the EH implementation to the new proposal:
https://github.com/WebAssembly/exception-handling/blob/master/proposals/Exceptions.md
(The previous proposal was
https://github.com/WebAssembly/exception-handling/blob/master/proposals/old/Exceptions.md)
- Instruction changes
- Now we have one single `catch` instruction that returns a except_ref
value
- `throw` now can take variable number of operations
- `rethrow` does not have 'depth' argument anymore
- `br_on_exn` queries an except_ref to see if it matches the tag and
branches to the given label if true.
- `extract_exception` is a pseudo instruction that simulates popping
values from wasm stack. This is to make `br_on_exn`, a very special
instruction, work: `br_on_exn` puts values onto the stack only if it
is taken, and the # of values can vay depending on the tag.
- Now there's only one `catch` per `try`, this patch removes all special
handling for terminate pad with a call to `__clang_call_terminate`.
Before it was the only case there are two catch clauses (a normal
`catch` and `catch_all` per `try`).
- Make `rethrow` act as a terminator like `throw`. This splits BB after
`rethrow` in WasmEHPrepare, and deletes an unnecessary `unreachable`
after `rethrow` in LateEHPrepare.
- Now we stop at all catchpads (because we add wasm `catch` instruction
that catches all exceptions), this creates new
`findWasmUnwindDestinations` function in SelectionDAGBuilder.
- Now we use `br_on_exn` instrution to figure out if an except_ref
matches the current tag or not, LateEHPrepare generates this sequence
for catch pads:
```
catch
block i32
br_on_exn $__cpp_exception
end_block
extract_exception
```
- Branch analysis for `br_on_exn` in WebAssemblyInstrInfo
- Other various misc. changes to switch to the new proposal.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D57134
llvm-svn: 352598
2019-01-30 11:21:57 +08:00
|
|
|
OperandBundleDef("funclet", CPI));
|
2018-06-01 06:02:34 +08:00
|
|
|
PersCI->setDoesNotThrow();
|
|
|
|
|
2021-08-25 11:40:21 +08:00
|
|
|
// Pseudocode: int selector = __wasm_lpad_context.selector;
|
2019-02-02 04:44:24 +08:00
|
|
|
Instruction *Selector =
|
|
|
|
IRB.CreateLoad(IRB.getInt32Ty(), SelectorField, "selector");
|
2018-06-01 06:02:34 +08:00
|
|
|
|
|
|
|
// Replace the return value from wasm.get.ehselector() with the selector value
|
|
|
|
// loaded from __wasm_lpad_context.selector.
|
|
|
|
assert(GetSelectorCI && "wasm.get.ehselector() call does not exist");
|
|
|
|
GetSelectorCI->replaceAllUsesWith(Selector);
|
|
|
|
GetSelectorCI->eraseFromParent();
|
|
|
|
}
|
2018-06-19 08:26:39 +08:00
|
|
|
|
|
|
|
void llvm::calculateWasmEHInfo(const Function *F, WasmEHFuncInfo &EHInfo) {
|
[WebAssembly] Exception handling: Switch to the new proposal
Summary:
This switches the EH implementation to the new proposal:
https://github.com/WebAssembly/exception-handling/blob/master/proposals/Exceptions.md
(The previous proposal was
https://github.com/WebAssembly/exception-handling/blob/master/proposals/old/Exceptions.md)
- Instruction changes
- Now we have one single `catch` instruction that returns a except_ref
value
- `throw` now can take variable number of operations
- `rethrow` does not have 'depth' argument anymore
- `br_on_exn` queries an except_ref to see if it matches the tag and
branches to the given label if true.
- `extract_exception` is a pseudo instruction that simulates popping
values from wasm stack. This is to make `br_on_exn`, a very special
instruction, work: `br_on_exn` puts values onto the stack only if it
is taken, and the # of values can vay depending on the tag.
- Now there's only one `catch` per `try`, this patch removes all special
handling for terminate pad with a call to `__clang_call_terminate`.
Before it was the only case there are two catch clauses (a normal
`catch` and `catch_all` per `try`).
- Make `rethrow` act as a terminator like `throw`. This splits BB after
`rethrow` in WasmEHPrepare, and deletes an unnecessary `unreachable`
after `rethrow` in LateEHPrepare.
- Now we stop at all catchpads (because we add wasm `catch` instruction
that catches all exceptions), this creates new
`findWasmUnwindDestinations` function in SelectionDAGBuilder.
- Now we use `br_on_exn` instrution to figure out if an except_ref
matches the current tag or not, LateEHPrepare generates this sequence
for catch pads:
```
catch
block i32
br_on_exn $__cpp_exception
end_block
extract_exception
```
- Branch analysis for `br_on_exn` in WebAssemblyInstrInfo
- Other various misc. changes to switch to the new proposal.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D57134
llvm-svn: 352598
2019-01-30 11:21:57 +08:00
|
|
|
// If an exception is not caught by a catchpad (i.e., it is a foreign
|
|
|
|
// exception), it will unwind to its parent catchswitch's unwind destination.
|
|
|
|
// We don't record an unwind destination for cleanuppads because every
|
|
|
|
// exception should be caught by it.
|
2018-06-19 08:26:39 +08:00
|
|
|
for (const auto &BB : *F) {
|
|
|
|
if (!BB.isEHPad())
|
|
|
|
continue;
|
|
|
|
const Instruction *Pad = BB.getFirstNonPHI();
|
|
|
|
|
|
|
|
if (const auto *CatchPad = dyn_cast<CatchPadInst>(Pad)) {
|
|
|
|
const auto *UnwindBB = CatchPad->getCatchSwitch()->getUnwindDest();
|
|
|
|
if (!UnwindBB)
|
|
|
|
continue;
|
|
|
|
const Instruction *UnwindPad = UnwindBB->getFirstNonPHI();
|
|
|
|
if (const auto *CatchSwitch = dyn_cast<CatchSwitchInst>(UnwindPad))
|
|
|
|
// Currently there should be only one handler per a catchswitch.
|
2021-02-22 02:10:47 +08:00
|
|
|
EHInfo.setUnwindDest(&BB, *CatchSwitch->handlers().begin());
|
2018-06-19 08:26:39 +08:00
|
|
|
else // cleanuppad
|
2021-02-22 02:10:47 +08:00
|
|
|
EHInfo.setUnwindDest(&BB, UnwindBB);
|
2018-06-19 08:26:39 +08:00
|
|
|
}
|
|
|
|
}
|
|
|
|
}
|