maxjhandsome
/
llvm-project
forked from OSchip/llvm-project
1
0
Fork 0
Code Issues Pull Requests Packages Releases Wiki Activity
llvm-project/llvm/test/CodeGen/X86/statepoint-live-in.ll

173 lines
6.7 KiB
LLVM
Raw Normal View History

[x86] regenerate checks with update_llc_test_checks.py The dream of a unified check-line auto-generator for all phases of compilation is dead. The llc script has already diverged to be better at its goal, so having 2 scripts that do almost the same thing is just causing confusion. We can rip out the llc ability in update_test_checks.py next and rename it, so it will be clear that we have one script for llc check auto-generation and another for opt. llvm-svn: 305206
2017-06-13 01:31:36 +08:00
; NOTE: Assertions have been autogenerated by utils/update_llc_test_checks.py
Add placeholder for more extensive verification of psuedo ops This initial patch doesn't actually do much useful. It's just to show where the new code goes. Once this is in, I'll extend the verification logic to check more useful properties. For those curious, the more complicated version of this patch already found one very suspicious thing. Differential Revision: https://reviews.llvm.org/D33819 llvm-svn: 304564
2017-06-03 00:36:37 +08:00
; RUN: llc -verify-machineinstrs -O3 < %s | FileCheck %s
[statepoints][experimental] Add support for live-in semantics of values in deopt bundles This is a first step towards supporting deopt value lowering and reporting entirely with the register allocator. I hope to build on this in the near future to support live-on-return semantics, but I have a use case which allows me to test and investigate code quality with just the live-in semantics so I've chosen to start there. For those curious, my use cases is our implementation of the "__llvm_deoptimize" function we bind to @llvm.deoptimize. I'm choosing not to hard code that fact in the patch and instead make it configurable via function attributes. The basic approach here is modelled on what is done for the "Live In" values on stackmaps and patchpoints. (A secondary goal here is to remove one of the last barriers to merging the pseudo instructions.) We start by adding the operands directly to the STATEPOINT SDNode. Once we've lowered to MI, we extend the remat logic used by the register allocator to fold virtual register uses into StackMap::Indirect entries as needed. This does rely on the fact that the register allocator rematerializes. If it didn't along some code path, we could end up with more vregs than physical registers and fail to allocate. Today, we *only* fold in the register allocator. This can create some weird effects when combined with arguments passed on the stack because we don't fold them appropriately. I have an idea how to fix that, but it needs this patch in place to work on that effectively. (There's some weird interaction with the scheduler as well, more investigation needed.) My near term plan is to land this patch off-by-default, experiment in my local tree to identify any correctness issues and then start fixing codegen problems one by one as I find them. Once I have the live-in lowering fully working (both correctness and code quality), I'm hoping to move on to the live-on-return semantics. Note: I don't have any *known* miscompiles with this patch enabled, but I'm pretty sure I'll find at least a couple. Thus, the "experimental" tag and the fact it's off by default. Differential Revision: https://reviews.llvm.org/D24000 llvm-svn: 280250
2016-08-31 23:12:17 +08:00
target datalayout = "e-m:o-i64:64-f80:128-n8:16:32:64-S128"
target triple = "x86_64-apple-macosx10.11.0"
declare void @bar() #0
declare void @baz()
define void @test1(i32 %a) gc "statepoint-example" {
Canonicalize a test via utils/update_test_checks.py Turns out I might not have further changes to make here, but with the way I'd written the tests, even I couldn't tell that. :( llvm-svn: 304613
2017-06-03 07:27:36 +08:00
; CHECK-LABEL: test1:
[CodeGen] Unify MBB reference format in both MIR and debug output As part of the unification of the debug format and the MIR format, print MBB references as '%bb.5'. The MIR printer prints the IR name of a MBB only for block definitions. * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g' * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g' * find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g' * grep -nr 'BB#' and fix Differential Revision: https://reviews.llvm.org/D40422 llvm-svn: 319665
2017-12-05 01:18:51 +08:00
; CHECK: ## %bb.0: ## %entry
Canonicalize a test via utils/update_test_checks.py Turns out I might not have further changes to make here, but with the way I'd written the tests, even I couldn't tell that. :( llvm-svn: 304613
2017-06-03 07:27:36 +08:00
; CHECK-NEXT: pushq %rax
; CHECK-NEXT: .cfi_def_cfa_offset 16
; CHECK-NEXT: callq _bar
; CHECK-NEXT: Ltmp0:
; CHECK-NEXT: popq %rax
; CHECK-NEXT: retq
[statepoints][experimental] Add support for live-in semantics of values in deopt bundles This is a first step towards supporting deopt value lowering and reporting entirely with the register allocator. I hope to build on this in the near future to support live-on-return semantics, but I have a use case which allows me to test and investigate code quality with just the live-in semantics so I've chosen to start there. For those curious, my use cases is our implementation of the "__llvm_deoptimize" function we bind to @llvm.deoptimize. I'm choosing not to hard code that fact in the patch and instead make it configurable via function attributes. The basic approach here is modelled on what is done for the "Live In" values on stackmaps and patchpoints. (A secondary goal here is to remove one of the last barriers to merging the pseudo instructions.) We start by adding the operands directly to the STATEPOINT SDNode. Once we've lowered to MI, we extend the remat logic used by the register allocator to fold virtual register uses into StackMap::Indirect entries as needed. This does rely on the fact that the register allocator rematerializes. If it didn't along some code path, we could end up with more vregs than physical registers and fail to allocate. Today, we *only* fold in the register allocator. This can create some weird effects when combined with arguments passed on the stack because we don't fold them appropriately. I have an idea how to fix that, but it needs this patch in place to work on that effectively. (There's some weird interaction with the scheduler as well, more investigation needed.) My near term plan is to land this patch off-by-default, experiment in my local tree to identify any correctness issues and then start fixing codegen problems one by one as I find them. Once I have the live-in lowering fully working (both correctness and code quality), I'm hoping to move on to the live-on-return semantics. Note: I don't have any *known* miscompiles with this patch enabled, but I'm pretty sure I'll find at least a couple. Thus, the "experimental" tag and the fact it's off by default. Differential Revision: https://reviews.llvm.org/D24000 llvm-svn: 280250
2016-08-31 23:12:17 +08:00
entry:
; We expect the argument to be passed in an extra register to bar
%statepoint_token1 = call token (i64, i32, void ()*, i32, i32, ...) @llvm.experimental.gc.statepoint.p0f_isVoidf(i64 2882400000, i32 0, void ()* @bar, i32 0, i32 2, i32 0, i32 1, i32 %a)
ret void
}
define void @test2(i32 %a, i32 %b) gc "statepoint-example" {
Canonicalize a test via utils/update_test_checks.py Turns out I might not have further changes to make here, but with the way I'd written the tests, even I couldn't tell that. :( llvm-svn: 304613
2017-06-03 07:27:36 +08:00
; CHECK-LABEL: test2:
[CodeGen] Unify MBB reference format in both MIR and debug output As part of the unification of the debug format and the MIR format, print MBB references as '%bb.5'. The MIR printer prints the IR name of a MBB only for block definitions. * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g' * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g' * find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g' * grep -nr 'BB#' and fix Differential Revision: https://reviews.llvm.org/D40422 llvm-svn: 319665
2017-12-05 01:18:51 +08:00
; CHECK: ## %bb.0: ## %entry
Canonicalize a test via utils/update_test_checks.py Turns out I might not have further changes to make here, but with the way I'd written the tests, even I couldn't tell that. :( llvm-svn: 304613
2017-06-03 07:27:36 +08:00
; CHECK-NEXT: pushq %rbp
; CHECK-NEXT: .cfi_def_cfa_offset 16
; CHECK-NEXT: pushq %rbx
; CHECK-NEXT: .cfi_def_cfa_offset 24
; CHECK-NEXT: pushq %rax
; CHECK-NEXT: .cfi_def_cfa_offset 32
; CHECK-NEXT: .cfi_offset %rbx, -24
; CHECK-NEXT: .cfi_offset %rbp, -16
; CHECK-NEXT: movl %esi, %ebx
; CHECK-NEXT: movl %edi, %ebp
; CHECK-NEXT: callq _bar
; CHECK-NEXT: Ltmp1:
; CHECK-NEXT: callq _bar
; CHECK-NEXT: Ltmp2:
; CHECK-NEXT: addq $8, %rsp
; CHECK-NEXT: popq %rbx
; CHECK-NEXT: popq %rbp
; CHECK-NEXT: retq
[statepoints][experimental] Add support for live-in semantics of values in deopt bundles This is a first step towards supporting deopt value lowering and reporting entirely with the register allocator. I hope to build on this in the near future to support live-on-return semantics, but I have a use case which allows me to test and investigate code quality with just the live-in semantics so I've chosen to start there. For those curious, my use cases is our implementation of the "__llvm_deoptimize" function we bind to @llvm.deoptimize. I'm choosing not to hard code that fact in the patch and instead make it configurable via function attributes. The basic approach here is modelled on what is done for the "Live In" values on stackmaps and patchpoints. (A secondary goal here is to remove one of the last barriers to merging the pseudo instructions.) We start by adding the operands directly to the STATEPOINT SDNode. Once we've lowered to MI, we extend the remat logic used by the register allocator to fold virtual register uses into StackMap::Indirect entries as needed. This does rely on the fact that the register allocator rematerializes. If it didn't along some code path, we could end up with more vregs than physical registers and fail to allocate. Today, we *only* fold in the register allocator. This can create some weird effects when combined with arguments passed on the stack because we don't fold them appropriately. I have an idea how to fix that, but it needs this patch in place to work on that effectively. (There's some weird interaction with the scheduler as well, more investigation needed.) My near term plan is to land this patch off-by-default, experiment in my local tree to identify any correctness issues and then start fixing codegen problems one by one as I find them. Once I have the live-in lowering fully working (both correctness and code quality), I'm hoping to move on to the live-on-return semantics. Note: I don't have any *known* miscompiles with this patch enabled, but I'm pretty sure I'll find at least a couple. Thus, the "experimental" tag and the fact it's off by default. Differential Revision: https://reviews.llvm.org/D24000 llvm-svn: 280250
2016-08-31 23:12:17 +08:00
entry:
; Because the first call clobbers esi, we have to move the values into
; new registers. Note that they stay in the registers for both calls.
call token (i64, i32, void ()*, i32, i32, ...) @llvm.experimental.gc.statepoint.p0f_isVoidf(i64 2882400000, i32 0, void ()* @bar, i32 0, i32 2, i32 0, i32 2, i32 %a, i32 %b)
call token (i64, i32, void ()*, i32, i32, ...) @llvm.experimental.gc.statepoint.p0f_isVoidf(i64 2882400000, i32 0, void ()* @bar, i32 0, i32 2, i32 0, i32 2, i32 %b, i32 %a)
ret void
}
define void @test3(i32 %a, i32 %b, i32 %c, i32 %d, i32 %e, i32 %f, i32 %g, i32 %h, i32 %i) gc "statepoint-example" {
Canonicalize a test via utils/update_test_checks.py Turns out I might not have further changes to make here, but with the way I'd written the tests, even I couldn't tell that. :( llvm-svn: 304613
2017-06-03 07:27:36 +08:00
; CHECK-LABEL: test3:
[CodeGen] Unify MBB reference format in both MIR and debug output As part of the unification of the debug format and the MIR format, print MBB references as '%bb.5'. The MIR printer prints the IR name of a MBB only for block definitions. * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g' * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g' * find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g' * grep -nr 'BB#' and fix Differential Revision: https://reviews.llvm.org/D40422 llvm-svn: 319665
2017-12-05 01:18:51 +08:00
; CHECK: ## %bb.0: ## %entry
Canonicalize a test via utils/update_test_checks.py Turns out I might not have further changes to make here, but with the way I'd written the tests, even I couldn't tell that. :( llvm-svn: 304613
2017-06-03 07:27:36 +08:00
; CHECK-NEXT: pushq %rax
; CHECK-NEXT: .cfi_def_cfa_offset 16
; CHECK-NEXT: callq _bar
; CHECK-NEXT: Ltmp3:
; CHECK-NEXT: popq %rax
; CHECK-NEXT: retq
[statepoints][experimental] Add support for live-in semantics of values in deopt bundles This is a first step towards supporting deopt value lowering and reporting entirely with the register allocator. I hope to build on this in the near future to support live-on-return semantics, but I have a use case which allows me to test and investigate code quality with just the live-in semantics so I've chosen to start there. For those curious, my use cases is our implementation of the "__llvm_deoptimize" function we bind to @llvm.deoptimize. I'm choosing not to hard code that fact in the patch and instead make it configurable via function attributes. The basic approach here is modelled on what is done for the "Live In" values on stackmaps and patchpoints. (A secondary goal here is to remove one of the last barriers to merging the pseudo instructions.) We start by adding the operands directly to the STATEPOINT SDNode. Once we've lowered to MI, we extend the remat logic used by the register allocator to fold virtual register uses into StackMap::Indirect entries as needed. This does rely on the fact that the register allocator rematerializes. If it didn't along some code path, we could end up with more vregs than physical registers and fail to allocate. Today, we *only* fold in the register allocator. This can create some weird effects when combined with arguments passed on the stack because we don't fold them appropriately. I have an idea how to fix that, but it needs this patch in place to work on that effectively. (There's some weird interaction with the scheduler as well, more investigation needed.) My near term plan is to land this patch off-by-default, experiment in my local tree to identify any correctness issues and then start fixing codegen problems one by one as I find them. Once I have the live-in lowering fully working (both correctness and code quality), I'm hoping to move on to the live-on-return semantics. Note: I don't have any *known* miscompiles with this patch enabled, but I'm pretty sure I'll find at least a couple. Thus, the "experimental" tag and the fact it's off by default. Differential Revision: https://reviews.llvm.org/D24000 llvm-svn: 280250
2016-08-31 23:12:17 +08:00
entry:
Canonicalize a test via utils/update_test_checks.py Turns out I might not have further changes to make here, but with the way I'd written the tests, even I couldn't tell that. :( llvm-svn: 304613
2017-06-03 07:27:36 +08:00
; We directly reference the argument slot
[statepoints][experimental] Add support for live-in semantics of values in deopt bundles This is a first step towards supporting deopt value lowering and reporting entirely with the register allocator. I hope to build on this in the near future to support live-on-return semantics, but I have a use case which allows me to test and investigate code quality with just the live-in semantics so I've chosen to start there. For those curious, my use cases is our implementation of the "__llvm_deoptimize" function we bind to @llvm.deoptimize. I'm choosing not to hard code that fact in the patch and instead make it configurable via function attributes. The basic approach here is modelled on what is done for the "Live In" values on stackmaps and patchpoints. (A secondary goal here is to remove one of the last barriers to merging the pseudo instructions.) We start by adding the operands directly to the STATEPOINT SDNode. Once we've lowered to MI, we extend the remat logic used by the register allocator to fold virtual register uses into StackMap::Indirect entries as needed. This does rely on the fact that the register allocator rematerializes. If it didn't along some code path, we could end up with more vregs than physical registers and fail to allocate. Today, we *only* fold in the register allocator. This can create some weird effects when combined with arguments passed on the stack because we don't fold them appropriately. I have an idea how to fix that, but it needs this patch in place to work on that effectively. (There's some weird interaction with the scheduler as well, more investigation needed.) My near term plan is to land this patch off-by-default, experiment in my local tree to identify any correctness issues and then start fixing codegen problems one by one as I find them. Once I have the live-in lowering fully working (both correctness and code quality), I'm hoping to move on to the live-on-return semantics. Note: I don't have any *known* miscompiles with this patch enabled, but I'm pretty sure I'll find at least a couple. Thus, the "experimental" tag and the fact it's off by default. Differential Revision: https://reviews.llvm.org/D24000 llvm-svn: 280250
2016-08-31 23:12:17 +08:00
%statepoint_token1 = call token (i64, i32, void ()*, i32, i32, ...) @llvm.experimental.gc.statepoint.p0f_isVoidf(i64 2882400000, i32 0, void ()* @bar, i32 0, i32 2, i32 0, i32 9, i32 %a, i32 %b, i32 %c, i32 %d, i32 %e, i32 %f, i32 %g, i32 %h, i32 %i)
ret void
}
; This case just confirms that we don't crash when given more live values
[peephole] Enhance folding logic to work for STATEPOINTs The general idea here is to get enough of the existing restrictions out of the way that the already existing folding logic in foldMemoryOperand can kick in for STATEPOINTs and fold references to immutable stack slots. The key changes are: Support for folding multiple operands at once which reference the same load Support for folding multiple loads into a single instruction Walk all the operands of the instruction for varidic instructions (this is a bug fix!) Once this lands, I'll post another patch which refactors the TII interface here. There's nothing actually x86 specific about the x86 code used here. Differential Revision: https://reviews.llvm.org/D24103 llvm-svn: 289510
2016-12-13 09:38:41 +08:00
; than registers. This is a case where we *have* to use a stack slot. This
; also ends up being a good test of whether we can fold loads from immutable
; stack slots into the statepoint.
[statepoints][experimental] Add support for live-in semantics of values in deopt bundles This is a first step towards supporting deopt value lowering and reporting entirely with the register allocator. I hope to build on this in the near future to support live-on-return semantics, but I have a use case which allows me to test and investigate code quality with just the live-in semantics so I've chosen to start there. For those curious, my use cases is our implementation of the "__llvm_deoptimize" function we bind to @llvm.deoptimize. I'm choosing not to hard code that fact in the patch and instead make it configurable via function attributes. The basic approach here is modelled on what is done for the "Live In" values on stackmaps and patchpoints. (A secondary goal here is to remove one of the last barriers to merging the pseudo instructions.) We start by adding the operands directly to the STATEPOINT SDNode. Once we've lowered to MI, we extend the remat logic used by the register allocator to fold virtual register uses into StackMap::Indirect entries as needed. This does rely on the fact that the register allocator rematerializes. If it didn't along some code path, we could end up with more vregs than physical registers and fail to allocate. Today, we *only* fold in the register allocator. This can create some weird effects when combined with arguments passed on the stack because we don't fold them appropriately. I have an idea how to fix that, but it needs this patch in place to work on that effectively. (There's some weird interaction with the scheduler as well, more investigation needed.) My near term plan is to land this patch off-by-default, experiment in my local tree to identify any correctness issues and then start fixing codegen problems one by one as I find them. Once I have the live-in lowering fully working (both correctness and code quality), I'm hoping to move on to the live-on-return semantics. Note: I don't have any *known* miscompiles with this patch enabled, but I'm pretty sure I'll find at least a couple. Thus, the "experimental" tag and the fact it's off by default. Differential Revision: https://reviews.llvm.org/D24000 llvm-svn: 280250
2016-08-31 23:12:17 +08:00
define void @test4(i32 %a, i32 %b, i32 %c, i32 %d, i32 %e, i32 %f, i32 %g, i32 %h, i32 %i, i32 %j, i32 %k, i32 %l, i32 %m, i32 %n, i32 %o, i32 %p, i32 %q, i32 %r, i32 %s, i32 %t, i32 %u, i32 %v, i32 %w, i32 %x, i32 %y, i32 %z) gc "statepoint-example" {
Canonicalize a test via utils/update_test_checks.py Turns out I might not have further changes to make here, but with the way I'd written the tests, even I couldn't tell that. :( llvm-svn: 304613
2017-06-03 07:27:36 +08:00
; CHECK-LABEL: test4:
[CodeGen] Unify MBB reference format in both MIR and debug output As part of the unification of the debug format and the MIR format, print MBB references as '%bb.5'. The MIR printer prints the IR name of a MBB only for block definitions. * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g' * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g' * find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g' * grep -nr 'BB#' and fix Differential Revision: https://reviews.llvm.org/D40422 llvm-svn: 319665
2017-12-05 01:18:51 +08:00
; CHECK: ## %bb.0: ## %entry
Canonicalize a test via utils/update_test_checks.py Turns out I might not have further changes to make here, but with the way I'd written the tests, even I couldn't tell that. :( llvm-svn: 304613
2017-06-03 07:27:36 +08:00
; CHECK-NEXT: pushq %rax
; CHECK-NEXT: .cfi_def_cfa_offset 16
; CHECK-NEXT: callq _bar
; CHECK-NEXT: Ltmp4:
; CHECK-NEXT: popq %rax
; CHECK-NEXT: retq
[statepoints][experimental] Add support for live-in semantics of values in deopt bundles This is a first step towards supporting deopt value lowering and reporting entirely with the register allocator. I hope to build on this in the near future to support live-on-return semantics, but I have a use case which allows me to test and investigate code quality with just the live-in semantics so I've chosen to start there. For those curious, my use cases is our implementation of the "__llvm_deoptimize" function we bind to @llvm.deoptimize. I'm choosing not to hard code that fact in the patch and instead make it configurable via function attributes. The basic approach here is modelled on what is done for the "Live In" values on stackmaps and patchpoints. (A secondary goal here is to remove one of the last barriers to merging the pseudo instructions.) We start by adding the operands directly to the STATEPOINT SDNode. Once we've lowered to MI, we extend the remat logic used by the register allocator to fold virtual register uses into StackMap::Indirect entries as needed. This does rely on the fact that the register allocator rematerializes. If it didn't along some code path, we could end up with more vregs than physical registers and fail to allocate. Today, we *only* fold in the register allocator. This can create some weird effects when combined with arguments passed on the stack because we don't fold them appropriately. I have an idea how to fix that, but it needs this patch in place to work on that effectively. (There's some weird interaction with the scheduler as well, more investigation needed.) My near term plan is to land this patch off-by-default, experiment in my local tree to identify any correctness issues and then start fixing codegen problems one by one as I find them. Once I have the live-in lowering fully working (both correctness and code quality), I'm hoping to move on to the live-on-return semantics. Note: I don't have any *known* miscompiles with this patch enabled, but I'm pretty sure I'll find at least a couple. Thus, the "experimental" tag and the fact it's off by default. Differential Revision: https://reviews.llvm.org/D24000 llvm-svn: 280250
2016-08-31 23:12:17 +08:00
entry:
%statepoint_token1 = call token (i64, i32, void ()*, i32, i32, ...) @llvm.experimental.gc.statepoint.p0f_isVoidf(i64 2882400000, i32 0, void ()* @bar, i32 0, i32 2, i32 0, i32 26, i32 %a, i32 %b, i32 %c, i32 %d, i32 %e, i32 %f, i32 %g, i32 %h, i32 %i, i32 %j, i32 %k, i32 %l, i32 %m, i32 %n, i32 %o, i32 %p, i32 %q, i32 %r, i32 %s, i32 %t, i32 %u, i32 %v, i32 %w, i32 %x, i32 %y, i32 %z)
ret void
}
; A live-through gc-value must be spilled even if it is also a live-in deopt
; value. For live-in, we could technically report the register copy, but from
Canonicalize a test via utils/update_test_checks.py Turns out I might not have further changes to make here, but with the way I'd written the tests, even I couldn't tell that. :( llvm-svn: 304613
2017-06-03 07:27:36 +08:00
; a code quality perspective it's better to reuse the required stack slot so
[statepoints][experimental] Add support for live-in semantics of values in deopt bundles This is a first step towards supporting deopt value lowering and reporting entirely with the register allocator. I hope to build on this in the near future to support live-on-return semantics, but I have a use case which allows me to test and investigate code quality with just the live-in semantics so I've chosen to start there. For those curious, my use cases is our implementation of the "__llvm_deoptimize" function we bind to @llvm.deoptimize. I'm choosing not to hard code that fact in the patch and instead make it configurable via function attributes. The basic approach here is modelled on what is done for the "Live In" values on stackmaps and patchpoints. (A secondary goal here is to remove one of the last barriers to merging the pseudo instructions.) We start by adding the operands directly to the STATEPOINT SDNode. Once we've lowered to MI, we extend the remat logic used by the register allocator to fold virtual register uses into StackMap::Indirect entries as needed. This does rely on the fact that the register allocator rematerializes. If it didn't along some code path, we could end up with more vregs than physical registers and fail to allocate. Today, we *only* fold in the register allocator. This can create some weird effects when combined with arguments passed on the stack because we don't fold them appropriately. I have an idea how to fix that, but it needs this patch in place to work on that effectively. (There's some weird interaction with the scheduler as well, more investigation needed.) My near term plan is to land this patch off-by-default, experiment in my local tree to identify any correctness issues and then start fixing codegen problems one by one as I find them. Once I have the live-in lowering fully working (both correctness and code quality), I'm hoping to move on to the live-on-return semantics. Note: I don't have any *known* miscompiles with this patch enabled, but I'm pretty sure I'll find at least a couple. Thus, the "experimental" tag and the fact it's off by default. Differential Revision: https://reviews.llvm.org/D24000 llvm-svn: 280250
2016-08-31 23:12:17 +08:00
; as to put less stress on the register allocator for no benefit.
define i32 addrspace(1)* @test5(i32 %a, i32 addrspace(1)* %p) gc "statepoint-example" {
Canonicalize a test via utils/update_test_checks.py Turns out I might not have further changes to make here, but with the way I'd written the tests, even I couldn't tell that. :( llvm-svn: 304613
2017-06-03 07:27:36 +08:00
; CHECK-LABEL: test5:
[CodeGen] Unify MBB reference format in both MIR and debug output As part of the unification of the debug format and the MIR format, print MBB references as '%bb.5'. The MIR printer prints the IR name of a MBB only for block definitions. * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g' * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g' * find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g' * grep -nr 'BB#' and fix Differential Revision: https://reviews.llvm.org/D40422 llvm-svn: 319665
2017-12-05 01:18:51 +08:00
; CHECK: ## %bb.0: ## %entry
Canonicalize a test via utils/update_test_checks.py Turns out I might not have further changes to make here, but with the way I'd written the tests, even I couldn't tell that. :( llvm-svn: 304613
2017-06-03 07:27:36 +08:00
; CHECK-NEXT: pushq %rax
; CHECK-NEXT: .cfi_def_cfa_offset 16
; CHECK-NEXT: movq %rsi, (%rsp)
; CHECK-NEXT: callq _bar
; CHECK-NEXT: Ltmp5:
; CHECK-NEXT: movq (%rsp), %rax
; CHECK-NEXT: popq %rcx
; CHECK-NEXT: retq
[statepoints][experimental] Add support for live-in semantics of values in deopt bundles This is a first step towards supporting deopt value lowering and reporting entirely with the register allocator. I hope to build on this in the near future to support live-on-return semantics, but I have a use case which allows me to test and investigate code quality with just the live-in semantics so I've chosen to start there. For those curious, my use cases is our implementation of the "__llvm_deoptimize" function we bind to @llvm.deoptimize. I'm choosing not to hard code that fact in the patch and instead make it configurable via function attributes. The basic approach here is modelled on what is done for the "Live In" values on stackmaps and patchpoints. (A secondary goal here is to remove one of the last barriers to merging the pseudo instructions.) We start by adding the operands directly to the STATEPOINT SDNode. Once we've lowered to MI, we extend the remat logic used by the register allocator to fold virtual register uses into StackMap::Indirect entries as needed. This does rely on the fact that the register allocator rematerializes. If it didn't along some code path, we could end up with more vregs than physical registers and fail to allocate. Today, we *only* fold in the register allocator. This can create some weird effects when combined with arguments passed on the stack because we don't fold them appropriately. I have an idea how to fix that, but it needs this patch in place to work on that effectively. (There's some weird interaction with the scheduler as well, more investigation needed.) My near term plan is to land this patch off-by-default, experiment in my local tree to identify any correctness issues and then start fixing codegen problems one by one as I find them. Once I have the live-in lowering fully working (both correctness and code quality), I'm hoping to move on to the live-on-return semantics. Note: I don't have any *known* miscompiles with this patch enabled, but I'm pretty sure I'll find at least a couple. Thus, the "experimental" tag and the fact it's off by default. Differential Revision: https://reviews.llvm.org/D24000 llvm-svn: 280250
2016-08-31 23:12:17 +08:00
entry:
%token = call token (i64, i32, void ()*, i32, i32, ...) @llvm.experimental.gc.statepoint.p0f_isVoidf(i64 2882400000, i32 0, void ()* @bar, i32 0, i32 2, i32 0, i32 1, i32 %a, i32 addrspace(1)* %p, i32 addrspace(1)* %p)
%p2 = call i32 addrspace(1)* @llvm.experimental.gc.relocate.p1i32(token %token, i32 9, i32 9)
ret i32 addrspace(1)* %p2
}
; Show the interaction of live-through spilling followed by live-in.
define void @test6(i32 %a) gc "statepoint-example" {
Canonicalize a test via utils/update_test_checks.py Turns out I might not have further changes to make here, but with the way I'd written the tests, even I couldn't tell that. :( llvm-svn: 304613
2017-06-03 07:27:36 +08:00
; CHECK-LABEL: test6:
[CodeGen] Unify MBB reference format in both MIR and debug output As part of the unification of the debug format and the MIR format, print MBB references as '%bb.5'. The MIR printer prints the IR name of a MBB only for block definitions. * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)->getNumber\(\)/" << printMBBReference(*\1)/g' * find . \( -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#" << ([a-zA-Z0-9_]+)\.getNumber\(\)/" << printMBBReference(\1)/g' * find . \( -name "*.txt" -o -name "*.s" -o -name "*.mir" -o -name "*.cpp" -o -name "*.h" -o -name "*.ll" \) -type f -print0 | xargs -0 sed -i '' -E 's/BB#([0-9]+)/%bb.\1/g' * grep -nr 'BB#' and fix Differential Revision: https://reviews.llvm.org/D40422 llvm-svn: 319665
2017-12-05 01:18:51 +08:00
; CHECK: ## %bb.0: ## %entry
Canonicalize a test via utils/update_test_checks.py Turns out I might not have further changes to make here, but with the way I'd written the tests, even I couldn't tell that. :( llvm-svn: 304613
2017-06-03 07:27:36 +08:00
; CHECK-NEXT: pushq %rbx
; CHECK-NEXT: .cfi_def_cfa_offset 16
; CHECK-NEXT: subq $16, %rsp
; CHECK-NEXT: .cfi_def_cfa_offset 32
; CHECK-NEXT: .cfi_offset %rbx, -16
; CHECK-NEXT: movl %edi, %ebx
Re-enable "[MachineCopyPropagation] Extend pass to do COPY source forwarding" Re-enable commit r323991 now that r325931 has been committed to make MachineOperand::isRenamable() check more conservative w.r.t. code changes and opt-in on a per-target basis. llvm-svn: 326208
2018-02-28 00:59:10 +08:00
; CHECK-NEXT: movl %edi, {{[0-9]+}}(%rsp)
Canonicalize a test via utils/update_test_checks.py Turns out I might not have further changes to make here, but with the way I'd written the tests, even I couldn't tell that. :( llvm-svn: 304613
2017-06-03 07:27:36 +08:00
; CHECK-NEXT: callq _baz
; CHECK-NEXT: Ltmp6:
; CHECK-NEXT: callq _bar
; CHECK-NEXT: Ltmp7:
; CHECK-NEXT: addq $16, %rsp
; CHECK-NEXT: popq %rbx
; CHECK-NEXT: retq
[statepoints][experimental] Add support for live-in semantics of values in deopt bundles This is a first step towards supporting deopt value lowering and reporting entirely with the register allocator. I hope to build on this in the near future to support live-on-return semantics, but I have a use case which allows me to test and investigate code quality with just the live-in semantics so I've chosen to start there. For those curious, my use cases is our implementation of the "__llvm_deoptimize" function we bind to @llvm.deoptimize. I'm choosing not to hard code that fact in the patch and instead make it configurable via function attributes. The basic approach here is modelled on what is done for the "Live In" values on stackmaps and patchpoints. (A secondary goal here is to remove one of the last barriers to merging the pseudo instructions.) We start by adding the operands directly to the STATEPOINT SDNode. Once we've lowered to MI, we extend the remat logic used by the register allocator to fold virtual register uses into StackMap::Indirect entries as needed. This does rely on the fact that the register allocator rematerializes. If it didn't along some code path, we could end up with more vregs than physical registers and fail to allocate. Today, we *only* fold in the register allocator. This can create some weird effects when combined with arguments passed on the stack because we don't fold them appropriately. I have an idea how to fix that, but it needs this patch in place to work on that effectively. (There's some weird interaction with the scheduler as well, more investigation needed.) My near term plan is to land this patch off-by-default, experiment in my local tree to identify any correctness issues and then start fixing codegen problems one by one as I find them. Once I have the live-in lowering fully working (both correctness and code quality), I'm hoping to move on to the live-on-return semantics. Note: I don't have any *known* miscompiles with this patch enabled, but I'm pretty sure I'll find at least a couple. Thus, the "experimental" tag and the fact it's off by default. Differential Revision: https://reviews.llvm.org/D24000 llvm-svn: 280250
2016-08-31 23:12:17 +08:00
entry:
call token (i64, i32, void ()*, i32, i32, ...) @llvm.experimental.gc.statepoint.p0f_isVoidf(i64 2882400000, i32 0, void ()* @baz, i32 0, i32 0, i32 0, i32 1, i32 %a)
call token (i64, i32, void ()*, i32, i32, ...) @llvm.experimental.gc.statepoint.p0f_isVoidf(i64 2882400000, i32 0, void ()* @bar, i32 0, i32 2, i32 0, i32 1, i32 %a)
ret void
}
MCStreamer: Use "cfi" for CFI related temp labels. Choosing a "cfi" name makes the intend a bit clearer in an assembly dump and more importantly the assembly dumps are slightly more stable as the numbers don't move around anymore when unrelated code calls createTempSymbol() more or less often. As they are temp labels the name doesn't influence the generated object code. Differential Revision: https://reviews.llvm.org/D27244 llvm-svn: 288290
2016-12-01 07:48:26 +08:00
; CHECK: Ltmp0-_test1
[statepoints][experimental] Add support for live-in semantics of values in deopt bundles This is a first step towards supporting deopt value lowering and reporting entirely with the register allocator. I hope to build on this in the near future to support live-on-return semantics, but I have a use case which allows me to test and investigate code quality with just the live-in semantics so I've chosen to start there. For those curious, my use cases is our implementation of the "__llvm_deoptimize" function we bind to @llvm.deoptimize. I'm choosing not to hard code that fact in the patch and instead make it configurable via function attributes. The basic approach here is modelled on what is done for the "Live In" values on stackmaps and patchpoints. (A secondary goal here is to remove one of the last barriers to merging the pseudo instructions.) We start by adding the operands directly to the STATEPOINT SDNode. Once we've lowered to MI, we extend the remat logic used by the register allocator to fold virtual register uses into StackMap::Indirect entries as needed. This does rely on the fact that the register allocator rematerializes. If it didn't along some code path, we could end up with more vregs than physical registers and fail to allocate. Today, we *only* fold in the register allocator. This can create some weird effects when combined with arguments passed on the stack because we don't fold them appropriately. I have an idea how to fix that, but it needs this patch in place to work on that effectively. (There's some weird interaction with the scheduler as well, more investigation needed.) My near term plan is to land this patch off-by-default, experiment in my local tree to identify any correctness issues and then start fixing codegen problems one by one as I find them. Once I have the live-in lowering fully working (both correctness and code quality), I'm hoping to move on to the live-on-return semantics. Note: I don't have any *known* miscompiles with this patch enabled, but I'm pretty sure I'll find at least a couple. Thus, the "experimental" tag and the fact it's off by default. Differential Revision: https://reviews.llvm.org/D24000 llvm-svn: 280250
2016-08-31 23:12:17 +08:00
; CHECK: .byte 1
[StackMaps] Increase the size of the "location size" field Summary: In some cases LLVM (especially the SLP vectorizer) will create vectors that are 256 bytes (or larger). Given that this is intentional[0] is likely to get more common, this patch updates the StackMap binary format to deal with the spill locations for said vectors. This change also bumps the stack map version from 2 to 3. [0]: https://reviews.llvm.org/D32533#738350 Reviewers: reames, kavon, skatkov, javed.absar Subscribers: mcrosier, nemanjai, llvm-commits Differential Revision: https://reviews.llvm.org/D32629 llvm-svn: 301615
2017-04-28 12:48:42 +08:00
; CHECK-NEXT: .byte 0
; CHECK-NEXT: .short 4
[statepoints][experimental] Add support for live-in semantics of values in deopt bundles This is a first step towards supporting deopt value lowering and reporting entirely with the register allocator. I hope to build on this in the near future to support live-on-return semantics, but I have a use case which allows me to test and investigate code quality with just the live-in semantics so I've chosen to start there. For those curious, my use cases is our implementation of the "__llvm_deoptimize" function we bind to @llvm.deoptimize. I'm choosing not to hard code that fact in the patch and instead make it configurable via function attributes. The basic approach here is modelled on what is done for the "Live In" values on stackmaps and patchpoints. (A secondary goal here is to remove one of the last barriers to merging the pseudo instructions.) We start by adding the operands directly to the STATEPOINT SDNode. Once we've lowered to MI, we extend the remat logic used by the register allocator to fold virtual register uses into StackMap::Indirect entries as needed. This does rely on the fact that the register allocator rematerializes. If it didn't along some code path, we could end up with more vregs than physical registers and fail to allocate. Today, we *only* fold in the register allocator. This can create some weird effects when combined with arguments passed on the stack because we don't fold them appropriately. I have an idea how to fix that, but it needs this patch in place to work on that effectively. (There's some weird interaction with the scheduler as well, more investigation needed.) My near term plan is to land this patch off-by-default, experiment in my local tree to identify any correctness issues and then start fixing codegen problems one by one as I find them. Once I have the live-in lowering fully working (both correctness and code quality), I'm hoping to move on to the live-on-return semantics. Note: I don't have any *known* miscompiles with this patch enabled, but I'm pretty sure I'll find at least a couple. Thus, the "experimental" tag and the fact it's off by default. Differential Revision: https://reviews.llvm.org/D24000 llvm-svn: 280250
2016-08-31 23:12:17 +08:00
; CHECK-NEXT: .short 5
[StackMaps] Increase the size of the "location size" field Summary: In some cases LLVM (especially the SLP vectorizer) will create vectors that are 256 bytes (or larger). Given that this is intentional[0] is likely to get more common, this patch updates the StackMap binary format to deal with the spill locations for said vectors. This change also bumps the stack map version from 2 to 3. [0]: https://reviews.llvm.org/D32533#738350 Reviewers: reames, kavon, skatkov, javed.absar Subscribers: mcrosier, nemanjai, llvm-commits Differential Revision: https://reviews.llvm.org/D32629 llvm-svn: 301615
2017-04-28 12:48:42 +08:00
; CHECK-NEXT: .short 0
[statepoints][experimental] Add support for live-in semantics of values in deopt bundles This is a first step towards supporting deopt value lowering and reporting entirely with the register allocator. I hope to build on this in the near future to support live-on-return semantics, but I have a use case which allows me to test and investigate code quality with just the live-in semantics so I've chosen to start there. For those curious, my use cases is our implementation of the "__llvm_deoptimize" function we bind to @llvm.deoptimize. I'm choosing not to hard code that fact in the patch and instead make it configurable via function attributes. The basic approach here is modelled on what is done for the "Live In" values on stackmaps and patchpoints. (A secondary goal here is to remove one of the last barriers to merging the pseudo instructions.) We start by adding the operands directly to the STATEPOINT SDNode. Once we've lowered to MI, we extend the remat logic used by the register allocator to fold virtual register uses into StackMap::Indirect entries as needed. This does rely on the fact that the register allocator rematerializes. If it didn't along some code path, we could end up with more vregs than physical registers and fail to allocate. Today, we *only* fold in the register allocator. This can create some weird effects when combined with arguments passed on the stack because we don't fold them appropriately. I have an idea how to fix that, but it needs this patch in place to work on that effectively. (There's some weird interaction with the scheduler as well, more investigation needed.) My near term plan is to land this patch off-by-default, experiment in my local tree to identify any correctness issues and then start fixing codegen problems one by one as I find them. Once I have the live-in lowering fully working (both correctness and code quality), I'm hoping to move on to the live-on-return semantics. Note: I don't have any *known* miscompiles with this patch enabled, but I'm pretty sure I'll find at least a couple. Thus, the "experimental" tag and the fact it's off by default. Differential Revision: https://reviews.llvm.org/D24000 llvm-svn: 280250
2016-08-31 23:12:17 +08:00
; CHECK-NEXT: .long 0
MCStreamer: Use "cfi" for CFI related temp labels. Choosing a "cfi" name makes the intend a bit clearer in an assembly dump and more importantly the assembly dumps are slightly more stable as the numbers don't move around anymore when unrelated code calls createTempSymbol() more or less often. As they are temp labels the name doesn't influence the generated object code. Differential Revision: https://reviews.llvm.org/D27244 llvm-svn: 288290
2016-12-01 07:48:26 +08:00
; CHECK: Ltmp1-_test2
[statepoints][experimental] Add support for live-in semantics of values in deopt bundles This is a first step towards supporting deopt value lowering and reporting entirely with the register allocator. I hope to build on this in the near future to support live-on-return semantics, but I have a use case which allows me to test and investigate code quality with just the live-in semantics so I've chosen to start there. For those curious, my use cases is our implementation of the "__llvm_deoptimize" function we bind to @llvm.deoptimize. I'm choosing not to hard code that fact in the patch and instead make it configurable via function attributes. The basic approach here is modelled on what is done for the "Live In" values on stackmaps and patchpoints. (A secondary goal here is to remove one of the last barriers to merging the pseudo instructions.) We start by adding the operands directly to the STATEPOINT SDNode. Once we've lowered to MI, we extend the remat logic used by the register allocator to fold virtual register uses into StackMap::Indirect entries as needed. This does rely on the fact that the register allocator rematerializes. If it didn't along some code path, we could end up with more vregs than physical registers and fail to allocate. Today, we *only* fold in the register allocator. This can create some weird effects when combined with arguments passed on the stack because we don't fold them appropriately. I have an idea how to fix that, but it needs this patch in place to work on that effectively. (There's some weird interaction with the scheduler as well, more investigation needed.) My near term plan is to land this patch off-by-default, experiment in my local tree to identify any correctness issues and then start fixing codegen problems one by one as I find them. Once I have the live-in lowering fully working (both correctness and code quality), I'm hoping to move on to the live-on-return semantics. Note: I don't have any *known* miscompiles with this patch enabled, but I'm pretty sure I'll find at least a couple. Thus, the "experimental" tag and the fact it's off by default. Differential Revision: https://reviews.llvm.org/D24000 llvm-svn: 280250
2016-08-31 23:12:17 +08:00
; CHECK: .byte 1
[StackMaps] Increase the size of the "location size" field Summary: In some cases LLVM (especially the SLP vectorizer) will create vectors that are 256 bytes (or larger). Given that this is intentional[0] is likely to get more common, this patch updates the StackMap binary format to deal with the spill locations for said vectors. This change also bumps the stack map version from 2 to 3. [0]: https://reviews.llvm.org/D32533#738350 Reviewers: reames, kavon, skatkov, javed.absar Subscribers: mcrosier, nemanjai, llvm-commits Differential Revision: https://reviews.llvm.org/D32629 llvm-svn: 301615
2017-04-28 12:48:42 +08:00
; CHECK-NEXT: .byte 0
; CHECK-NEXT: .short 4
Revert "Re-enable "[MachineCopyPropagation] Extend pass to do COPY source forwarding"" This reverts commit r314729. Another bug has been encountered in an out-of-tree target reported by Quentin. llvm-svn: 314814
2017-10-04 00:59:13 +08:00
; CHECK-NEXT: .short 6
[StackMaps] Increase the size of the "location size" field Summary: In some cases LLVM (especially the SLP vectorizer) will create vectors that are 256 bytes (or larger). Given that this is intentional[0] is likely to get more common, this patch updates the StackMap binary format to deal with the spill locations for said vectors. This change also bumps the stack map version from 2 to 3. [0]: https://reviews.llvm.org/D32533#738350 Reviewers: reames, kavon, skatkov, javed.absar Subscribers: mcrosier, nemanjai, llvm-commits Differential Revision: https://reviews.llvm.org/D32629 llvm-svn: 301615
2017-04-28 12:48:42 +08:00
; CHECK-NEXT: .short 0
[statepoints][experimental] Add support for live-in semantics of values in deopt bundles This is a first step towards supporting deopt value lowering and reporting entirely with the register allocator. I hope to build on this in the near future to support live-on-return semantics, but I have a use case which allows me to test and investigate code quality with just the live-in semantics so I've chosen to start there. For those curious, my use cases is our implementation of the "__llvm_deoptimize" function we bind to @llvm.deoptimize. I'm choosing not to hard code that fact in the patch and instead make it configurable via function attributes. The basic approach here is modelled on what is done for the "Live In" values on stackmaps and patchpoints. (A secondary goal here is to remove one of the last barriers to merging the pseudo instructions.) We start by adding the operands directly to the STATEPOINT SDNode. Once we've lowered to MI, we extend the remat logic used by the register allocator to fold virtual register uses into StackMap::Indirect entries as needed. This does rely on the fact that the register allocator rematerializes. If it didn't along some code path, we could end up with more vregs than physical registers and fail to allocate. Today, we *only* fold in the register allocator. This can create some weird effects when combined with arguments passed on the stack because we don't fold them appropriately. I have an idea how to fix that, but it needs this patch in place to work on that effectively. (There's some weird interaction with the scheduler as well, more investigation needed.) My near term plan is to land this patch off-by-default, experiment in my local tree to identify any correctness issues and then start fixing codegen problems one by one as I find them. Once I have the live-in lowering fully working (both correctness and code quality), I'm hoping to move on to the live-on-return semantics. Note: I don't have any *known* miscompiles with this patch enabled, but I'm pretty sure I'll find at least a couple. Thus, the "experimental" tag and the fact it's off by default. Differential Revision: https://reviews.llvm.org/D24000 llvm-svn: 280250
2016-08-31 23:12:17 +08:00
; CHECK-NEXT: .long 0
; CHECK: .byte 1
[StackMaps] Increase the size of the "location size" field Summary: In some cases LLVM (especially the SLP vectorizer) will create vectors that are 256 bytes (or larger). Given that this is intentional[0] is likely to get more common, this patch updates the StackMap binary format to deal with the spill locations for said vectors. This change also bumps the stack map version from 2 to 3. [0]: https://reviews.llvm.org/D32533#738350 Reviewers: reames, kavon, skatkov, javed.absar Subscribers: mcrosier, nemanjai, llvm-commits Differential Revision: https://reviews.llvm.org/D32629 llvm-svn: 301615
2017-04-28 12:48:42 +08:00
; CHECK-NEXT: .byte 0
; CHECK-NEXT: .short 4
Revert "Re-enable "[MachineCopyPropagation] Extend pass to do COPY source forwarding"" This reverts commit r314729. Another bug has been encountered in an out-of-tree target reported by Quentin. llvm-svn: 314814
2017-10-04 00:59:13 +08:00
; CHECK-NEXT: .short 3
[StackMaps] Increase the size of the "location size" field Summary: In some cases LLVM (especially the SLP vectorizer) will create vectors that are 256 bytes (or larger). Given that this is intentional[0] is likely to get more common, this patch updates the StackMap binary format to deal with the spill locations for said vectors. This change also bumps the stack map version from 2 to 3. [0]: https://reviews.llvm.org/D32533#738350 Reviewers: reames, kavon, skatkov, javed.absar Subscribers: mcrosier, nemanjai, llvm-commits Differential Revision: https://reviews.llvm.org/D32629 llvm-svn: 301615
2017-04-28 12:48:42 +08:00
; CHECK-NEXT: .short 0
[statepoints][experimental] Add support for live-in semantics of values in deopt bundles This is a first step towards supporting deopt value lowering and reporting entirely with the register allocator. I hope to build on this in the near future to support live-on-return semantics, but I have a use case which allows me to test and investigate code quality with just the live-in semantics so I've chosen to start there. For those curious, my use cases is our implementation of the "__llvm_deoptimize" function we bind to @llvm.deoptimize. I'm choosing not to hard code that fact in the patch and instead make it configurable via function attributes. The basic approach here is modelled on what is done for the "Live In" values on stackmaps and patchpoints. (A secondary goal here is to remove one of the last barriers to merging the pseudo instructions.) We start by adding the operands directly to the STATEPOINT SDNode. Once we've lowered to MI, we extend the remat logic used by the register allocator to fold virtual register uses into StackMap::Indirect entries as needed. This does rely on the fact that the register allocator rematerializes. If it didn't along some code path, we could end up with more vregs than physical registers and fail to allocate. Today, we *only* fold in the register allocator. This can create some weird effects when combined with arguments passed on the stack because we don't fold them appropriately. I have an idea how to fix that, but it needs this patch in place to work on that effectively. (There's some weird interaction with the scheduler as well, more investigation needed.) My near term plan is to land this patch off-by-default, experiment in my local tree to identify any correctness issues and then start fixing codegen problems one by one as I find them. Once I have the live-in lowering fully working (both correctness and code quality), I'm hoping to move on to the live-on-return semantics. Note: I don't have any *known* miscompiles with this patch enabled, but I'm pretty sure I'll find at least a couple. Thus, the "experimental" tag and the fact it's off by default. Differential Revision: https://reviews.llvm.org/D24000 llvm-svn: 280250
2016-08-31 23:12:17 +08:00
; CHECK-NEXT: .long 0
MCStreamer: Use "cfi" for CFI related temp labels. Choosing a "cfi" name makes the intend a bit clearer in an assembly dump and more importantly the assembly dumps are slightly more stable as the numbers don't move around anymore when unrelated code calls createTempSymbol() more or less often. As they are temp labels the name doesn't influence the generated object code. Differential Revision: https://reviews.llvm.org/D27244 llvm-svn: 288290
2016-12-01 07:48:26 +08:00
; CHECK: Ltmp2-_test2
[statepoints][experimental] Add support for live-in semantics of values in deopt bundles This is a first step towards supporting deopt value lowering and reporting entirely with the register allocator. I hope to build on this in the near future to support live-on-return semantics, but I have a use case which allows me to test and investigate code quality with just the live-in semantics so I've chosen to start there. For those curious, my use cases is our implementation of the "__llvm_deoptimize" function we bind to @llvm.deoptimize. I'm choosing not to hard code that fact in the patch and instead make it configurable via function attributes. The basic approach here is modelled on what is done for the "Live In" values on stackmaps and patchpoints. (A secondary goal here is to remove one of the last barriers to merging the pseudo instructions.) We start by adding the operands directly to the STATEPOINT SDNode. Once we've lowered to MI, we extend the remat logic used by the register allocator to fold virtual register uses into StackMap::Indirect entries as needed. This does rely on the fact that the register allocator rematerializes. If it didn't along some code path, we could end up with more vregs than physical registers and fail to allocate. Today, we *only* fold in the register allocator. This can create some weird effects when combined with arguments passed on the stack because we don't fold them appropriately. I have an idea how to fix that, but it needs this patch in place to work on that effectively. (There's some weird interaction with the scheduler as well, more investigation needed.) My near term plan is to land this patch off-by-default, experiment in my local tree to identify any correctness issues and then start fixing codegen problems one by one as I find them. Once I have the live-in lowering fully working (both correctness and code quality), I'm hoping to move on to the live-on-return semantics. Note: I don't have any *known* miscompiles with this patch enabled, but I'm pretty sure I'll find at least a couple. Thus, the "experimental" tag and the fact it's off by default. Differential Revision: https://reviews.llvm.org/D24000 llvm-svn: 280250
2016-08-31 23:12:17 +08:00
; CHECK: .byte 1
[StackMaps] Increase the size of the "location size" field Summary: In some cases LLVM (especially the SLP vectorizer) will create vectors that are 256 bytes (or larger). Given that this is intentional[0] is likely to get more common, this patch updates the StackMap binary format to deal with the spill locations for said vectors. This change also bumps the stack map version from 2 to 3. [0]: https://reviews.llvm.org/D32533#738350 Reviewers: reames, kavon, skatkov, javed.absar Subscribers: mcrosier, nemanjai, llvm-commits Differential Revision: https://reviews.llvm.org/D32629 llvm-svn: 301615
2017-04-28 12:48:42 +08:00
; CHECK-NEXT: .byte 0
; CHECK-NEXT: .short 4
[statepoints][experimental] Add support for live-in semantics of values in deopt bundles This is a first step towards supporting deopt value lowering and reporting entirely with the register allocator. I hope to build on this in the near future to support live-on-return semantics, but I have a use case which allows me to test and investigate code quality with just the live-in semantics so I've chosen to start there. For those curious, my use cases is our implementation of the "__llvm_deoptimize" function we bind to @llvm.deoptimize. I'm choosing not to hard code that fact in the patch and instead make it configurable via function attributes. The basic approach here is modelled on what is done for the "Live In" values on stackmaps and patchpoints. (A secondary goal here is to remove one of the last barriers to merging the pseudo instructions.) We start by adding the operands directly to the STATEPOINT SDNode. Once we've lowered to MI, we extend the remat logic used by the register allocator to fold virtual register uses into StackMap::Indirect entries as needed. This does rely on the fact that the register allocator rematerializes. If it didn't along some code path, we could end up with more vregs than physical registers and fail to allocate. Today, we *only* fold in the register allocator. This can create some weird effects when combined with arguments passed on the stack because we don't fold them appropriately. I have an idea how to fix that, but it needs this patch in place to work on that effectively. (There's some weird interaction with the scheduler as well, more investigation needed.) My near term plan is to land this patch off-by-default, experiment in my local tree to identify any correctness issues and then start fixing codegen problems one by one as I find them. Once I have the live-in lowering fully working (both correctness and code quality), I'm hoping to move on to the live-on-return semantics. Note: I don't have any *known* miscompiles with this patch enabled, but I'm pretty sure I'll find at least a couple. Thus, the "experimental" tag and the fact it's off by default. Differential Revision: https://reviews.llvm.org/D24000 llvm-svn: 280250
2016-08-31 23:12:17 +08:00
; CHECK-NEXT: .short 3
[StackMaps] Increase the size of the "location size" field Summary: In some cases LLVM (especially the SLP vectorizer) will create vectors that are 256 bytes (or larger). Given that this is intentional[0] is likely to get more common, this patch updates the StackMap binary format to deal with the spill locations for said vectors. This change also bumps the stack map version from 2 to 3. [0]: https://reviews.llvm.org/D32533#738350 Reviewers: reames, kavon, skatkov, javed.absar Subscribers: mcrosier, nemanjai, llvm-commits Differential Revision: https://reviews.llvm.org/D32629 llvm-svn: 301615
2017-04-28 12:48:42 +08:00
; CHECK-NEXT: .short 0
[statepoints][experimental] Add support for live-in semantics of values in deopt bundles This is a first step towards supporting deopt value lowering and reporting entirely with the register allocator. I hope to build on this in the near future to support live-on-return semantics, but I have a use case which allows me to test and investigate code quality with just the live-in semantics so I've chosen to start there. For those curious, my use cases is our implementation of the "__llvm_deoptimize" function we bind to @llvm.deoptimize. I'm choosing not to hard code that fact in the patch and instead make it configurable via function attributes. The basic approach here is modelled on what is done for the "Live In" values on stackmaps and patchpoints. (A secondary goal here is to remove one of the last barriers to merging the pseudo instructions.) We start by adding the operands directly to the STATEPOINT SDNode. Once we've lowered to MI, we extend the remat logic used by the register allocator to fold virtual register uses into StackMap::Indirect entries as needed. This does rely on the fact that the register allocator rematerializes. If it didn't along some code path, we could end up with more vregs than physical registers and fail to allocate. Today, we *only* fold in the register allocator. This can create some weird effects when combined with arguments passed on the stack because we don't fold them appropriately. I have an idea how to fix that, but it needs this patch in place to work on that effectively. (There's some weird interaction with the scheduler as well, more investigation needed.) My near term plan is to land this patch off-by-default, experiment in my local tree to identify any correctness issues and then start fixing codegen problems one by one as I find them. Once I have the live-in lowering fully working (both correctness and code quality), I'm hoping to move on to the live-on-return semantics. Note: I don't have any *known* miscompiles with this patch enabled, but I'm pretty sure I'll find at least a couple. Thus, the "experimental" tag and the fact it's off by default. Differential Revision: https://reviews.llvm.org/D24000 llvm-svn: 280250
2016-08-31 23:12:17 +08:00
; CHECK-NEXT: .long 0
; CHECK: .byte 1
[StackMaps] Increase the size of the "location size" field Summary: In some cases LLVM (especially the SLP vectorizer) will create vectors that are 256 bytes (or larger). Given that this is intentional[0] is likely to get more common, this patch updates the StackMap binary format to deal with the spill locations for said vectors. This change also bumps the stack map version from 2 to 3. [0]: https://reviews.llvm.org/D32533#738350 Reviewers: reames, kavon, skatkov, javed.absar Subscribers: mcrosier, nemanjai, llvm-commits Differential Revision: https://reviews.llvm.org/D32629 llvm-svn: 301615
2017-04-28 12:48:42 +08:00
; CHECK-NEXT: .byte 0
; CHECK-NEXT: .short 4
[statepoints][experimental] Add support for live-in semantics of values in deopt bundles This is a first step towards supporting deopt value lowering and reporting entirely with the register allocator. I hope to build on this in the near future to support live-on-return semantics, but I have a use case which allows me to test and investigate code quality with just the live-in semantics so I've chosen to start there. For those curious, my use cases is our implementation of the "__llvm_deoptimize" function we bind to @llvm.deoptimize. I'm choosing not to hard code that fact in the patch and instead make it configurable via function attributes. The basic approach here is modelled on what is done for the "Live In" values on stackmaps and patchpoints. (A secondary goal here is to remove one of the last barriers to merging the pseudo instructions.) We start by adding the operands directly to the STATEPOINT SDNode. Once we've lowered to MI, we extend the remat logic used by the register allocator to fold virtual register uses into StackMap::Indirect entries as needed. This does rely on the fact that the register allocator rematerializes. If it didn't along some code path, we could end up with more vregs than physical registers and fail to allocate. Today, we *only* fold in the register allocator. This can create some weird effects when combined with arguments passed on the stack because we don't fold them appropriately. I have an idea how to fix that, but it needs this patch in place to work on that effectively. (There's some weird interaction with the scheduler as well, more investigation needed.) My near term plan is to land this patch off-by-default, experiment in my local tree to identify any correctness issues and then start fixing codegen problems one by one as I find them. Once I have the live-in lowering fully working (both correctness and code quality), I'm hoping to move on to the live-on-return semantics. Note: I don't have any *known* miscompiles with this patch enabled, but I'm pretty sure I'll find at least a couple. Thus, the "experimental" tag and the fact it's off by default. Differential Revision: https://reviews.llvm.org/D24000 llvm-svn: 280250
2016-08-31 23:12:17 +08:00
; CHECK-NEXT: .short 6
[StackMaps] Increase the size of the "location size" field Summary: In some cases LLVM (especially the SLP vectorizer) will create vectors that are 256 bytes (or larger). Given that this is intentional[0] is likely to get more common, this patch updates the StackMap binary format to deal with the spill locations for said vectors. This change also bumps the stack map version from 2 to 3. [0]: https://reviews.llvm.org/D32533#738350 Reviewers: reames, kavon, skatkov, javed.absar Subscribers: mcrosier, nemanjai, llvm-commits Differential Revision: https://reviews.llvm.org/D32629 llvm-svn: 301615
2017-04-28 12:48:42 +08:00
; CHECK-NEXT: .short 0
[statepoints][experimental] Add support for live-in semantics of values in deopt bundles This is a first step towards supporting deopt value lowering and reporting entirely with the register allocator. I hope to build on this in the near future to support live-on-return semantics, but I have a use case which allows me to test and investigate code quality with just the live-in semantics so I've chosen to start there. For those curious, my use cases is our implementation of the "__llvm_deoptimize" function we bind to @llvm.deoptimize. I'm choosing not to hard code that fact in the patch and instead make it configurable via function attributes. The basic approach here is modelled on what is done for the "Live In" values on stackmaps and patchpoints. (A secondary goal here is to remove one of the last barriers to merging the pseudo instructions.) We start by adding the operands directly to the STATEPOINT SDNode. Once we've lowered to MI, we extend the remat logic used by the register allocator to fold virtual register uses into StackMap::Indirect entries as needed. This does rely on the fact that the register allocator rematerializes. If it didn't along some code path, we could end up with more vregs than physical registers and fail to allocate. Today, we *only* fold in the register allocator. This can create some weird effects when combined with arguments passed on the stack because we don't fold them appropriately. I have an idea how to fix that, but it needs this patch in place to work on that effectively. (There's some weird interaction with the scheduler as well, more investigation needed.) My near term plan is to land this patch off-by-default, experiment in my local tree to identify any correctness issues and then start fixing codegen problems one by one as I find them. Once I have the live-in lowering fully working (both correctness and code quality), I'm hoping to move on to the live-on-return semantics. Note: I don't have any *known* miscompiles with this patch enabled, but I'm pretty sure I'll find at least a couple. Thus, the "experimental" tag and the fact it's off by default. Differential Revision: https://reviews.llvm.org/D24000 llvm-svn: 280250
2016-08-31 23:12:17 +08:00
; CHECK-NEXT: .long 0
declare token @llvm.experimental.gc.statepoint.p0f_isVoidf(i64, i32, void ()*, i32, i32, ...)
declare i32 addrspace(1)* @llvm.experimental.gc.relocate.p1i32(token, i32, i32)
attributes #0 = { "deopt-lowering"="live-in" }
attributes #1 = { "deopt-lowering"="live-through" }