maxjhandsome
/
llvm-project
forked from OSchip/llvm-project
1
0
Fork 0
Code Issues Pull Requests Packages Releases Wiki Activity
llvm-project/llvm/test/DebugInfo/X86/debug-loc-asan.ll

183 lines
6.6 KiB
LLVM
Raw Normal View History

Generate better location ranges for some register-described variables. Don't terminate location ranges for register-described variables at the end of machine basic block if this register is never modified in the function body, except for the prologue and epilogue. Prologue location is guessed by FrameSetup flags on MachineInstructions, while epilogue location is deduced from debug locations of instructions in the basic blocks ending with return instructions. This patch is mostly targeted to fix non-trivial debug locations for variables addressed via stack and frame pointers. It is not really a generic fix. We can still produce poor debug info for register-described variables if this register *is* modified somewhere in the function, but in unrelated places. This might be the case for the debug info in optimized binaries (e.g. for local variables in inlined functions). LiveDebugVariables pass in CodeGen attempts to fix this problem by adjusting DBG_VALUE instructions, but this pass is tied to greedy register allocator, which is used in optimized builds only. Proper fix would likely involve generalizing LiveDebugVariables to all register allocators. See more discussion in http://reviews.llvm.org/D3933 review thread. I'm proceeding with this patch to fix immediate severe problems and important cases, e.g. fix completely broken debug info with AddressSanitizer and fix PR19307 (missing debug info for by-value std::string arguments). llvm-svn: 210492
2014-06-10 05:53:47 +08:00
; RUN: llc -O0 -mtriple=x86_64-unknown-linux-gnu < %s | FileCheck %s
; Verify that we have correct debug info for local variables in code
; instrumented with AddressSanitizer.
; Generated from the source file test.cc:
; int bar(int y) {
; return y + 2;
; }
; with "clang++ -S -emit-llvm -fsanitize=address -O0 -g test.cc"
Allow X86FastIsel to cope with 64 bit absolute relocations This patch is a follow up to r211040 & r211052. Rather than bailing out of fast isel this patch will generate an alternate instruction (movabsq) instead of the leaq. While this will always have enough room to handle the 64 bit displacment it is generally over kill for internal symbols (most displacements will be within 32 bits) but since we have no way of communicating the code model to the the assmebler in order to avoid flagging an absolute leal/leaq as illegal when using a symbolic displacement. llvm-svn: 211130
2014-06-18 07:22:41 +08:00
; First, argument variable "y" resides in %rdi:
; CHECK: DEBUG_VALUE: bar:y <- RDI
Generate better location ranges for some register-described variables. Don't terminate location ranges for register-described variables at the end of machine basic block if this register is never modified in the function body, except for the prologue and epilogue. Prologue location is guessed by FrameSetup flags on MachineInstructions, while epilogue location is deduced from debug locations of instructions in the basic blocks ending with return instructions. This patch is mostly targeted to fix non-trivial debug locations for variables addressed via stack and frame pointers. It is not really a generic fix. We can still produce poor debug info for register-described variables if this register *is* modified somewhere in the function, but in unrelated places. This might be the case for the debug info in optimized binaries (e.g. for local variables in inlined functions). LiveDebugVariables pass in CodeGen attempts to fix this problem by adjusting DBG_VALUE instructions, but this pass is tied to greedy register allocator, which is used in optimized builds only. Proper fix would likely involve generalizing LiveDebugVariables to all register allocators. See more discussion in http://reviews.llvm.org/D3933 review thread. I'm proceeding with this patch to fix immediate severe problems and important cases, e.g. fix completely broken debug info with AddressSanitizer and fix PR19307 (missing debug info for by-value std::string arguments). llvm-svn: 210492
2014-06-10 05:53:47 +08:00
; Then its address is stored in a location on a stack:
Allow X86FastIsel to cope with 64 bit absolute relocations This patch is a follow up to r211040 & r211052. Rather than bailing out of fast isel this patch will generate an alternate instruction (movabsq) instead of the leaq. While this will always have enough room to handle the 64 bit displacment it is generally over kill for internal symbols (most displacements will be within 32 bits) but since we have no way of communicating the code model to the the assmebler in order to avoid flagging an absolute leal/leaq as illegal when using a symbolic displacement. llvm-svn: 211130
2014-06-18 07:22:41 +08:00
; CHECK: movq %rdi, [[OFFSET:[0-9]+]](%rsp)
Generate better location ranges for some register-described variables. Don't terminate location ranges for register-described variables at the end of machine basic block if this register is never modified in the function body, except for the prologue and epilogue. Prologue location is guessed by FrameSetup flags on MachineInstructions, while epilogue location is deduced from debug locations of instructions in the basic blocks ending with return instructions. This patch is mostly targeted to fix non-trivial debug locations for variables addressed via stack and frame pointers. It is not really a generic fix. We can still produce poor debug info for register-described variables if this register *is* modified somewhere in the function, but in unrelated places. This might be the case for the debug info in optimized binaries (e.g. for local variables in inlined functions). LiveDebugVariables pass in CodeGen attempts to fix this problem by adjusting DBG_VALUE instructions, but this pass is tied to greedy register allocator, which is used in optimized builds only. Proper fix would likely involve generalizing LiveDebugVariables to all register allocators. See more discussion in http://reviews.llvm.org/D3933 review thread. I'm proceeding with this patch to fix immediate severe problems and important cases, e.g. fix completely broken debug info with AddressSanitizer and fix PR19307 (missing debug info for by-value std::string arguments). llvm-svn: 210492
2014-06-10 05:53:47 +08:00
; CHECK-NEXT: [[START_LABEL:.Ltmp[0-9]+]]
; CHECK-NEXT: DEBUG_VALUE: bar:y <- [RSP+[[OFFSET]]]
; This location should be valid until the end of the function.
; CHECK: .Ldebug_loc{{[0-9]+}}:
; We expect two location ranges for the variable.
Debug Info: Move the complex expression handling (=the remainder) of emitDebugLocValue() into DwarfExpression. Ought to be NFC, but it actually uncovered a bug in the debug-loc-asan.ll testcase. The testcase checks that the address of variable "y" is stored at [RSP+16], which also lines up with the comment. It also check(ed) that the *value* of "y" is stored in RDI before that, but that is actually incorrect, since RDI is the very value that is stored in [RSP+16]. Here's the assembler output: movb 2147450880(%rcx), %r8b #DEBUG_VALUE: bar:y <- RDI cmpb $0, %r8b movq %rax, 32(%rsp) # 8-byte Spill movq %rsi, 24(%rsp) # 8-byte Spill movq %rdi, 16(%rsp) # 8-byte Spill .Ltmp3: #DEBUG_VALUE: bar:y <- [RSP+16] Fixed the comment to spell out the correct register and the check to expect an address rather than a value. Note that the range that is emitted for the RDI location was and is still wrong, it claims to begin at the function prologue, but really it should start where RDI is first assigned. llvm-svn: 225851
2015-01-14 07:39:11 +08:00
; First, its address is stored in %rdi:
Fix a bit of confusion about .set and produce more readable assembly. Every target we support has support for assembly that looks like a = b - c .long a What is special about MachO is that the above combination suppresses the production of a relocation. With this change we avoid producing the intermediary labels when they don't add any value. llvm-svn: 220256
2014-10-21 09:17:30 +08:00
; CHECK: .quad .Lfunc_begin0-.Lfunc_begin0
; CHECK-NEXT: .quad [[START_LABEL]]-.Lfunc_begin0
Debug Info: Move the complex expression handling (=the remainder) of emitDebugLocValue() into DwarfExpression. Ought to be NFC, but it actually uncovered a bug in the debug-loc-asan.ll testcase. The testcase checks that the address of variable "y" is stored at [RSP+16], which also lines up with the comment. It also check(ed) that the *value* of "y" is stored in RDI before that, but that is actually incorrect, since RDI is the very value that is stored in [RSP+16]. Here's the assembler output: movb 2147450880(%rcx), %r8b #DEBUG_VALUE: bar:y <- RDI cmpb $0, %r8b movq %rax, 32(%rsp) # 8-byte Spill movq %rsi, 24(%rsp) # 8-byte Spill movq %rdi, 16(%rsp) # 8-byte Spill .Ltmp3: #DEBUG_VALUE: bar:y <- [RSP+16] Fixed the comment to spell out the correct register and the check to expect an address rather than a value. Note that the range that is emitted for the RDI location was and is still wrong, it claims to begin at the function prologue, but really it should start where RDI is first assigned. llvm-svn: 225851
2015-01-14 07:39:11 +08:00
; CHECK: DW_OP_breg5
Generate better location ranges for some register-described variables. Don't terminate location ranges for register-described variables at the end of machine basic block if this register is never modified in the function body, except for the prologue and epilogue. Prologue location is guessed by FrameSetup flags on MachineInstructions, while epilogue location is deduced from debug locations of instructions in the basic blocks ending with return instructions. This patch is mostly targeted to fix non-trivial debug locations for variables addressed via stack and frame pointers. It is not really a generic fix. We can still produce poor debug info for register-described variables if this register *is* modified somewhere in the function, but in unrelated places. This might be the case for the debug info in optimized binaries (e.g. for local variables in inlined functions). LiveDebugVariables pass in CodeGen attempts to fix this problem by adjusting DBG_VALUE instructions, but this pass is tied to greedy register allocator, which is used in optimized builds only. Proper fix would likely involve generalizing LiveDebugVariables to all register allocators. See more discussion in http://reviews.llvm.org/D3933 review thread. I'm proceeding with this patch to fix immediate severe problems and important cases, e.g. fix completely broken debug info with AddressSanitizer and fix PR19307 (missing debug info for by-value std::string arguments). llvm-svn: 210492
2014-06-10 05:53:47 +08:00
; Then it's addressed via %rsp:
Fix a bit of confusion about .set and produce more readable assembly. Every target we support has support for assembly that looks like a = b - c .long a What is special about MachO is that the above combination suppresses the production of a relocation. With this change we avoid producing the intermediary labels when they don't add any value. llvm-svn: 220256
2014-10-21 09:17:30 +08:00
; CHECK: .quad [[START_LABEL]]-.Lfunc_begin0
Use the existing begin and end symbol for debug info. llvm-svn: 231338
2015-03-05 10:05:42 +08:00
; CHECK-NEXT: .Lfunc_end0-.Lfunc_begin0
Generate better location ranges for some register-described variables. Don't terminate location ranges for register-described variables at the end of machine basic block if this register is never modified in the function body, except for the prologue and epilogue. Prologue location is guessed by FrameSetup flags on MachineInstructions, while epilogue location is deduced from debug locations of instructions in the basic blocks ending with return instructions. This patch is mostly targeted to fix non-trivial debug locations for variables addressed via stack and frame pointers. It is not really a generic fix. We can still produce poor debug info for register-described variables if this register *is* modified somewhere in the function, but in unrelated places. This might be the case for the debug info in optimized binaries (e.g. for local variables in inlined functions). LiveDebugVariables pass in CodeGen attempts to fix this problem by adjusting DBG_VALUE instructions, but this pass is tied to greedy register allocator, which is used in optimized builds only. Proper fix would likely involve generalizing LiveDebugVariables to all register allocators. See more discussion in http://reviews.llvm.org/D3933 review thread. I'm proceeding with this patch to fix immediate severe problems and important cases, e.g. fix completely broken debug info with AddressSanitizer and fix PR19307 (missing debug info for by-value std::string arguments). llvm-svn: 210492
2014-06-10 05:53:47 +08:00
; CHECK: DW_OP_breg7
; CHECK-NEXT: [[OFFSET]]
; CHECK: DW_OP_deref
; ModuleID = 'test.cc'
target datalayout = "e-m:e-i64:64-f80:128-n8:16:32:64-S128"
target triple = "x86_64-unknown-linux-gnu"
@llvm.global_ctors = appending global [1 x { i32, void ()* }] [{ i32, void ()* } { i32 1, void ()* @asan.module_ctor }]
@__asan_option_detect_stack_use_after_return = external global i32
@__asan_gen_ = private unnamed_addr constant [16 x i8] c"1 32 4 6 y.addr\00", align 1
; Function Attrs: nounwind sanitize_address uwtable
define i32 @_Z3bari(i32 %y) #0 {
entry:
%MyAlloca = alloca [64 x i8], align 32
%0 = ptrtoint [64 x i8]* %MyAlloca to i64
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%1 = load i32, i32* @__asan_option_detect_stack_use_after_return
Generate better location ranges for some register-described variables. Don't terminate location ranges for register-described variables at the end of machine basic block if this register is never modified in the function body, except for the prologue and epilogue. Prologue location is guessed by FrameSetup flags on MachineInstructions, while epilogue location is deduced from debug locations of instructions in the basic blocks ending with return instructions. This patch is mostly targeted to fix non-trivial debug locations for variables addressed via stack and frame pointers. It is not really a generic fix. We can still produce poor debug info for register-described variables if this register *is* modified somewhere in the function, but in unrelated places. This might be the case for the debug info in optimized binaries (e.g. for local variables in inlined functions). LiveDebugVariables pass in CodeGen attempts to fix this problem by adjusting DBG_VALUE instructions, but this pass is tied to greedy register allocator, which is used in optimized builds only. Proper fix would likely involve generalizing LiveDebugVariables to all register allocators. See more discussion in http://reviews.llvm.org/D3933 review thread. I'm proceeding with this patch to fix immediate severe problems and important cases, e.g. fix completely broken debug info with AddressSanitizer and fix PR19307 (missing debug info for by-value std::string arguments). llvm-svn: 210492
2014-06-10 05:53:47 +08:00
%2 = icmp ne i32 %1, 0
br i1 %2, label %3, label %5
; <label>:3 ; preds = %entry
%4 = call i64 @__asan_stack_malloc_0(i64 64, i64 %0)
br label %5
; <label>:5 ; preds = %entry, %3
%6 = phi i64 [ %0, %entry ], [ %4, %3 ]
%7 = add i64 %6, 32
%8 = inttoptr i64 %7 to i32*
%9 = inttoptr i64 %6 to i64*
store i64 1102416563, i64* %9
%10 = add i64 %6, 8
%11 = inttoptr i64 %10 to i64*
store i64 ptrtoint ([16 x i8]* @__asan_gen_ to i64), i64* %11
%12 = add i64 %6, 16
%13 = inttoptr i64 %12 to i64*
store i64 ptrtoint (i32 (i32)* @_Z3bari to i64), i64* %13
%14 = lshr i64 %6, 3
%15 = add i64 %14, 2147450880
%16 = add i64 %15, 0
%17 = inttoptr i64 %16 to i64*
store i64 -868083100587789839, i64* %17
%18 = ptrtoint i32* %8 to i64
%19 = lshr i64 %18, 3
%20 = add i64 %19, 2147450880
%21 = inttoptr i64 %20 to i8*
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%22 = load i8, i8* %21
Generate better location ranges for some register-described variables. Don't terminate location ranges for register-described variables at the end of machine basic block if this register is never modified in the function body, except for the prologue and epilogue. Prologue location is guessed by FrameSetup flags on MachineInstructions, while epilogue location is deduced from debug locations of instructions in the basic blocks ending with return instructions. This patch is mostly targeted to fix non-trivial debug locations for variables addressed via stack and frame pointers. It is not really a generic fix. We can still produce poor debug info for register-described variables if this register *is* modified somewhere in the function, but in unrelated places. This might be the case for the debug info in optimized binaries (e.g. for local variables in inlined functions). LiveDebugVariables pass in CodeGen attempts to fix this problem by adjusting DBG_VALUE instructions, but this pass is tied to greedy register allocator, which is used in optimized builds only. Proper fix would likely involve generalizing LiveDebugVariables to all register allocators. See more discussion in http://reviews.llvm.org/D3933 review thread. I'm proceeding with this patch to fix immediate severe problems and important cases, e.g. fix completely broken debug info with AddressSanitizer and fix PR19307 (missing debug info for by-value std::string arguments). llvm-svn: 210492
2014-06-10 05:53:47 +08:00
%23 = icmp ne i8 %22, 0
IR: Give 'DI' prefix to debug info metadata Finish off PR23080 by renaming the debug info IR constructs from `MD*` to `DI*`. The last of the `DIDescriptor` classes were deleted in r235356, and the last of the related typedefs removed in r235413, so this has all baked for about a week. Note: If you have out-of-tree code (like a frontend), I recommend that you get everything compiling and tests passing with the *previous* commit before updating to this one. It'll be easier to keep track of what code is using the `DIDescriptor` hierarchy and what you've already updated, and I think you're extremely unlikely to insert bugs. YMMV of course. Back to *this* commit: I did this using the rename-md-di-nodes.sh upgrade script I've attached to PR23080 (both code and testcases) and filtered through clang-format-diff.py. I edited the tests for test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns were off-by-three. It should work on your out-of-tree testcases (and code, if you've followed the advice in the previous paragraph). Some of the tests are in badly named files now (e.g., test/Assembler/invalid-mdcompositetype-missing-tag.ll should be 'dicompositetype'); I'll come back and move the files in a follow-up commit. llvm-svn: 236120
2015-04-30 00:38:44 +08:00
call void @llvm.dbg.declare(metadata i32* %8, metadata !12, metadata !14), !dbg !DILocation(scope: !4)
Generate better location ranges for some register-described variables. Don't terminate location ranges for register-described variables at the end of machine basic block if this register is never modified in the function body, except for the prologue and epilogue. Prologue location is guessed by FrameSetup flags on MachineInstructions, while epilogue location is deduced from debug locations of instructions in the basic blocks ending with return instructions. This patch is mostly targeted to fix non-trivial debug locations for variables addressed via stack and frame pointers. It is not really a generic fix. We can still produce poor debug info for register-described variables if this register *is* modified somewhere in the function, but in unrelated places. This might be the case for the debug info in optimized binaries (e.g. for local variables in inlined functions). LiveDebugVariables pass in CodeGen attempts to fix this problem by adjusting DBG_VALUE instructions, but this pass is tied to greedy register allocator, which is used in optimized builds only. Proper fix would likely involve generalizing LiveDebugVariables to all register allocators. See more discussion in http://reviews.llvm.org/D3933 review thread. I'm proceeding with this patch to fix immediate severe problems and important cases, e.g. fix completely broken debug info with AddressSanitizer and fix PR19307 (missing debug info for by-value std::string arguments). llvm-svn: 210492
2014-06-10 05:53:47 +08:00
br i1 %23, label %24, label %30
; <label>:24 ; preds = %5
%25 = and i64 %18, 7
%26 = add i64 %25, 3
%27 = trunc i64 %26 to i8
%28 = icmp sge i8 %27, %22
br i1 %28, label %29, label %30
; <label>:29 ; preds = %24
call void @__asan_report_store4(i64 %18)
call void asm sideeffect "", ""()
unreachable
; <label>:30 ; preds = %24, %5
store i32 %y, i32* %8, align 4
%31 = ptrtoint i32* %8 to i64, !dbg !13
%32 = lshr i64 %31, 3, !dbg !13
%33 = add i64 %32, 2147450880, !dbg !13
%34 = inttoptr i64 %33 to i8*, !dbg !13
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%35 = load i8, i8* %34, !dbg !13
Generate better location ranges for some register-described variables. Don't terminate location ranges for register-described variables at the end of machine basic block if this register is never modified in the function body, except for the prologue and epilogue. Prologue location is guessed by FrameSetup flags on MachineInstructions, while epilogue location is deduced from debug locations of instructions in the basic blocks ending with return instructions. This patch is mostly targeted to fix non-trivial debug locations for variables addressed via stack and frame pointers. It is not really a generic fix. We can still produce poor debug info for register-described variables if this register *is* modified somewhere in the function, but in unrelated places. This might be the case for the debug info in optimized binaries (e.g. for local variables in inlined functions). LiveDebugVariables pass in CodeGen attempts to fix this problem by adjusting DBG_VALUE instructions, but this pass is tied to greedy register allocator, which is used in optimized builds only. Proper fix would likely involve generalizing LiveDebugVariables to all register allocators. See more discussion in http://reviews.llvm.org/D3933 review thread. I'm proceeding with this patch to fix immediate severe problems and important cases, e.g. fix completely broken debug info with AddressSanitizer and fix PR19307 (missing debug info for by-value std::string arguments). llvm-svn: 210492
2014-06-10 05:53:47 +08:00
%36 = icmp ne i8 %35, 0, !dbg !13
br i1 %36, label %37, label %43, !dbg !13
; <label>:37 ; preds = %30
%38 = and i64 %31, 7, !dbg !13
%39 = add i64 %38, 3, !dbg !13
%40 = trunc i64 %39 to i8, !dbg !13
%41 = icmp sge i8 %40, %35, !dbg !13
br i1 %41, label %42, label %43
; <label>:42 ; preds = %37
call void @__asan_report_load4(i64 %31), !dbg !13
call void asm sideeffect "", ""()
unreachable
; <label>:43 ; preds = %37, %30
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%44 = load i32, i32* %8, align 4, !dbg !13
Generate better location ranges for some register-described variables. Don't terminate location ranges for register-described variables at the end of machine basic block if this register is never modified in the function body, except for the prologue and epilogue. Prologue location is guessed by FrameSetup flags on MachineInstructions, while epilogue location is deduced from debug locations of instructions in the basic blocks ending with return instructions. This patch is mostly targeted to fix non-trivial debug locations for variables addressed via stack and frame pointers. It is not really a generic fix. We can still produce poor debug info for register-described variables if this register *is* modified somewhere in the function, but in unrelated places. This might be the case for the debug info in optimized binaries (e.g. for local variables in inlined functions). LiveDebugVariables pass in CodeGen attempts to fix this problem by adjusting DBG_VALUE instructions, but this pass is tied to greedy register allocator, which is used in optimized builds only. Proper fix would likely involve generalizing LiveDebugVariables to all register allocators. See more discussion in http://reviews.llvm.org/D3933 review thread. I'm proceeding with this patch to fix immediate severe problems and important cases, e.g. fix completely broken debug info with AddressSanitizer and fix PR19307 (missing debug info for by-value std::string arguments). llvm-svn: 210492
2014-06-10 05:53:47 +08:00
%add = add nsw i32 %44, 2, !dbg !13
store i64 1172321806, i64* %9, !dbg !13
%45 = icmp ne i64 %6, %0, !dbg !13
br i1 %45, label %46, label %53, !dbg !13
; <label>:46 ; preds = %43
%47 = add i64 %15, 0, !dbg !13
%48 = inttoptr i64 %47 to i64*, !dbg !13
store i64 -723401728380766731, i64* %48, !dbg !13
%49 = add i64 %6, 56, !dbg !13
%50 = inttoptr i64 %49 to i64*, !dbg !13
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%51 = load i64, i64* %50, !dbg !13
Generate better location ranges for some register-described variables. Don't terminate location ranges for register-described variables at the end of machine basic block if this register is never modified in the function body, except for the prologue and epilogue. Prologue location is guessed by FrameSetup flags on MachineInstructions, while epilogue location is deduced from debug locations of instructions in the basic blocks ending with return instructions. This patch is mostly targeted to fix non-trivial debug locations for variables addressed via stack and frame pointers. It is not really a generic fix. We can still produce poor debug info for register-described variables if this register *is* modified somewhere in the function, but in unrelated places. This might be the case for the debug info in optimized binaries (e.g. for local variables in inlined functions). LiveDebugVariables pass in CodeGen attempts to fix this problem by adjusting DBG_VALUE instructions, but this pass is tied to greedy register allocator, which is used in optimized builds only. Proper fix would likely involve generalizing LiveDebugVariables to all register allocators. See more discussion in http://reviews.llvm.org/D3933 review thread. I'm proceeding with this patch to fix immediate severe problems and important cases, e.g. fix completely broken debug info with AddressSanitizer and fix PR19307 (missing debug info for by-value std::string arguments). llvm-svn: 210492
2014-06-10 05:53:47 +08:00
%52 = inttoptr i64 %51 to i8*, !dbg !13
store i8 0, i8* %52, !dbg !13
br label %56, !dbg !13
; <label>:53 ; preds = %43
%54 = add i64 %15, 0, !dbg !13
%55 = inttoptr i64 %54 to i64*, !dbg !13
store i64 0, i64* %55, !dbg !13
br label %56, !dbg !13
; <label>:56 ; preds = %53, %46
ret i32 %add, !dbg !13
}
; Function Attrs: nounwind readnone
Move the complex address expression out of DIVariable and into an extra argument of the llvm.dbg.declare/llvm.dbg.value intrinsics. Previously, DIVariable was a variable-length field that has an optional reference to a Metadata array consisting of a variable number of complex address expressions. In the case of OpPiece expressions this is wasting a lot of storage in IR, because when an aggregate type is, e.g., SROA'd into all of its n individual members, the IR will contain n copies of the DIVariable, all alike, only differing in the complex address reference at the end. By making the complex address into an extra argument of the dbg.value/dbg.declare intrinsics, all of the pieces can reference the same variable and the complex address expressions can be uniqued across the CU, too. Down the road, this will allow us to move other flags, such as "indirection" out of the DIVariable, too. The new intrinsics look like this: declare void @llvm.dbg.declare(metadata %storage, metadata %var, metadata %expr) declare void @llvm.dbg.value(metadata %storage, i64 %offset, metadata %var, metadata %expr) This patch adds a new LLVM-local tag to DIExpressions, so we can detect and pretty-print DIExpression metadata nodes. What this patch doesn't do: This patch does not touch the "Indirect" field in DIVariable; but moving that into the expression would be a natural next step. http://reviews.llvm.org/D4919 rdar://problem/17994491 Thanks to dblaikie and dexonsmith for reviewing this patch! Note: I accidentally committed a bogus older version of this patch previously. llvm-svn: 218787
2014-10-02 02:55:02 +08:00
declare void @llvm.dbg.declare(metadata, metadata, metadata) #1
Generate better location ranges for some register-described variables. Don't terminate location ranges for register-described variables at the end of machine basic block if this register is never modified in the function body, except for the prologue and epilogue. Prologue location is guessed by FrameSetup flags on MachineInstructions, while epilogue location is deduced from debug locations of instructions in the basic blocks ending with return instructions. This patch is mostly targeted to fix non-trivial debug locations for variables addressed via stack and frame pointers. It is not really a generic fix. We can still produce poor debug info for register-described variables if this register *is* modified somewhere in the function, but in unrelated places. This might be the case for the debug info in optimized binaries (e.g. for local variables in inlined functions). LiveDebugVariables pass in CodeGen attempts to fix this problem by adjusting DBG_VALUE instructions, but this pass is tied to greedy register allocator, which is used in optimized builds only. Proper fix would likely involve generalizing LiveDebugVariables to all register allocators. See more discussion in http://reviews.llvm.org/D3933 review thread. I'm proceeding with this patch to fix immediate severe problems and important cases, e.g. fix completely broken debug info with AddressSanitizer and fix PR19307 (missing debug info for by-value std::string arguments). llvm-svn: 210492
2014-06-10 05:53:47 +08:00
define internal void @asan.module_ctor() {
call void @__asan_init_v3()
ret void
}
declare void @__asan_init_v3()
declare void @__asan_report_load4(i64)
declare void @__asan_report_store4(i64)
declare i64 @__asan_stack_malloc_0(i64, i64)
attributes #0 = { nounwind sanitize_address uwtable "less-precise-fpmad"="false" "no-frame-pointer-elim"="true" "no-frame-pointer-elim-non-leaf" "no-infs-fp-math"="false" "no-nans-fp-math"="false" "stack-protector-buffer-size"="8" "unsafe-fp-math"="false" "use-soft-float"="false" }
attributes #1 = { nounwind readnone }
!llvm.dbg.cu = !{!0}
!llvm.module.flags = !{!9, !10}
!llvm.ident = !{!11}
DI: Disallow uniquable DICompileUnits Since r241097, `DIBuilder` has only created distinct `DICompileUnit`s. The backend is liable to start relying on that (if it hasn't already), so make uniquable `DICompileUnit`s illegal and automatically upgrade old bitcode. This is a nice cleanup, since we can remove an unnecessary `DenseSet` (and the associated uniquing info) from `LLVMContextImpl`. Almost all the testcases were updated with this script: git grep -e '= !DICompileUnit' -l -- test | grep -v test/Bitcode | xargs sed -i '' -e 's,= !DICompileUnit,= distinct !DICompileUnit,' I imagine something similar should work for out-of-tree testcases. llvm-svn: 243885
2015-08-04 01:26:41 +08:00
!0 = distinct !DICompileUnit(language: DW_LANG_C_plus_plus, producer: "clang version 3.5.0 (209308)", isOptimized: false, emissionKind: 1, file: !1, enums: !2, retainedTypes: !2, subprograms: !3, globals: !2, imports: !2)
IR: Give 'DI' prefix to debug info metadata Finish off PR23080 by renaming the debug info IR constructs from `MD*` to `DI*`. The last of the `DIDescriptor` classes were deleted in r235356, and the last of the related typedefs removed in r235413, so this has all baked for about a week. Note: If you have out-of-tree code (like a frontend), I recommend that you get everything compiling and tests passing with the *previous* commit before updating to this one. It'll be easier to keep track of what code is using the `DIDescriptor` hierarchy and what you've already updated, and I think you're extremely unlikely to insert bugs. YMMV of course. Back to *this* commit: I did this using the rename-md-di-nodes.sh upgrade script I've attached to PR23080 (both code and testcases) and filtered through clang-format-diff.py. I edited the tests for test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns were off-by-three. It should work on your out-of-tree testcases (and code, if you've followed the advice in the previous paragraph). Some of the tests are in badly named files now (e.g., test/Assembler/invalid-mdcompositetype-missing-tag.ll should be 'dicompositetype'); I'll come back and move the files in a follow-up commit. llvm-svn: 236120
2015-04-30 00:38:44 +08:00
!1 = !DIFile(filename: "test.cc", directory: "/llvm_cmake_gcc")
IR: Make metadata typeless in assembly Now that `Metadata` is typeless, reflect that in the assembly. These are the matching assembly changes for the metadata/value split in r223802. - Only use the `metadata` type when referencing metadata from a call intrinsic -- i.e., only when it's used as a `Value`. - Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode` when referencing it from call intrinsics. So, assembly like this: define @foo(i32 %v) { call void @llvm.foo(metadata !{i32 %v}, metadata !0) call void @llvm.foo(metadata !{i32 7}, metadata !0) call void @llvm.foo(metadata !1, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{metadata !3}, metadata !0) ret void, !bar !2 } !0 = metadata !{metadata !2} !1 = metadata !{i32* @global} !2 = metadata !{metadata !3} !3 = metadata !{} turns into this: define @foo(i32 %v) { call void @llvm.foo(metadata i32 %v, metadata !0) call void @llvm.foo(metadata i32 7, metadata !0) call void @llvm.foo(metadata i32* @global, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{!3}, metadata !0) ret void, !bar !2 } !0 = !{!2} !1 = !{i32* @global} !2 = !{!3} !3 = !{} I wrote an upgrade script that handled almost all of the tests in llvm and many of the tests in cfe (even handling many `CHECK` lines). I've attached it (or will attach it in a moment if you're speedy) to PR21532 to help everyone update their out-of-tree testcases. This is part of PR21532. llvm-svn: 224257
2014-12-16 03:07:53 +08:00
!2 = !{}
!3 = !{!4}
DI: Require subprogram definitions to be distinct As a follow-up to r246098, require `DISubprogram` definitions (`isDefinition: true`) to be 'distinct'. Specifically, add an assembler check, a verifier check, and bitcode upgrading logic to combat testcase bitrot after the `DIBuilder` change. While working on the testcases, I realized that test/Linker/subprogram-linkonce-weak-odr.ll isn't relevant anymore. Its purpose was to check for a corner case in PR22792 where two subprogram definitions match exactly and share the same metadata node. The new verifier check, requiring that subprogram definitions are 'distinct', precludes that possibility. I updated almost all the IR with the following script: git grep -l -E -e '= !DISubprogram\(.* isDefinition: true' | grep -v test/Bitcode | xargs sed -i '' -e 's/= \(!DISubprogram(.*, isDefinition: true\)/= distinct \1/' Likely some variant of would work for out-of-tree testcases. llvm-svn: 246327
2015-08-29 04:26:49 +08:00
!4 = distinct !DISubprogram(name: "bar", linkageName: "_Z3bari", line: 1, isLocal: false, isDefinition: true, virtualIndex: 6, flags: DIFlagPrototyped, isOptimized: false, scopeLine: 1, file: !1, scope: !5, type: !6, function: i32 (i32)* @_Z3bari, variables: !2)
IR: Give 'DI' prefix to debug info metadata Finish off PR23080 by renaming the debug info IR constructs from `MD*` to `DI*`. The last of the `DIDescriptor` classes were deleted in r235356, and the last of the related typedefs removed in r235413, so this has all baked for about a week. Note: If you have out-of-tree code (like a frontend), I recommend that you get everything compiling and tests passing with the *previous* commit before updating to this one. It'll be easier to keep track of what code is using the `DIDescriptor` hierarchy and what you've already updated, and I think you're extremely unlikely to insert bugs. YMMV of course. Back to *this* commit: I did this using the rename-md-di-nodes.sh upgrade script I've attached to PR23080 (both code and testcases) and filtered through clang-format-diff.py. I edited the tests for test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns were off-by-three. It should work on your out-of-tree testcases (and code, if you've followed the advice in the previous paragraph). Some of the tests are in badly named files now (e.g., test/Assembler/invalid-mdcompositetype-missing-tag.ll should be 'dicompositetype'); I'll come back and move the files in a follow-up commit. llvm-svn: 236120
2015-04-30 00:38:44 +08:00
!5 = !DIFile(filename: "test.cc", directory: "/llvm_cmake_gcc")
!6 = !DISubroutineType(types: !7)
IR: Make metadata typeless in assembly Now that `Metadata` is typeless, reflect that in the assembly. These are the matching assembly changes for the metadata/value split in r223802. - Only use the `metadata` type when referencing metadata from a call intrinsic -- i.e., only when it's used as a `Value`. - Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode` when referencing it from call intrinsics. So, assembly like this: define @foo(i32 %v) { call void @llvm.foo(metadata !{i32 %v}, metadata !0) call void @llvm.foo(metadata !{i32 7}, metadata !0) call void @llvm.foo(metadata !1, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{metadata !3}, metadata !0) ret void, !bar !2 } !0 = metadata !{metadata !2} !1 = metadata !{i32* @global} !2 = metadata !{metadata !3} !3 = metadata !{} turns into this: define @foo(i32 %v) { call void @llvm.foo(metadata i32 %v, metadata !0) call void @llvm.foo(metadata i32 7, metadata !0) call void @llvm.foo(metadata i32* @global, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{!3}, metadata !0) ret void, !bar !2 } !0 = !{!2} !1 = !{i32* @global} !2 = !{!3} !3 = !{} I wrote an upgrade script that handled almost all of the tests in llvm and many of the tests in cfe (even handling many `CHECK` lines). I've attached it (or will attach it in a moment if you're speedy) to PR21532 to help everyone update their out-of-tree testcases. This is part of PR21532. llvm-svn: 224257
2014-12-16 03:07:53 +08:00
!7 = !{!8, !8}
IR: Give 'DI' prefix to debug info metadata Finish off PR23080 by renaming the debug info IR constructs from `MD*` to `DI*`. The last of the `DIDescriptor` classes were deleted in r235356, and the last of the related typedefs removed in r235413, so this has all baked for about a week. Note: If you have out-of-tree code (like a frontend), I recommend that you get everything compiling and tests passing with the *previous* commit before updating to this one. It'll be easier to keep track of what code is using the `DIDescriptor` hierarchy and what you've already updated, and I think you're extremely unlikely to insert bugs. YMMV of course. Back to *this* commit: I did this using the rename-md-di-nodes.sh upgrade script I've attached to PR23080 (both code and testcases) and filtered through clang-format-diff.py. I edited the tests for test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns were off-by-three. It should work on your out-of-tree testcases (and code, if you've followed the advice in the previous paragraph). Some of the tests are in badly named files now (e.g., test/Assembler/invalid-mdcompositetype-missing-tag.ll should be 'dicompositetype'); I'll come back and move the files in a follow-up commit. llvm-svn: 236120
2015-04-30 00:38:44 +08:00
!8 = !DIBasicType(tag: DW_TAG_base_type, name: "int", size: 32, align: 32, encoding: DW_ATE_signed)
IR: Make metadata typeless in assembly Now that `Metadata` is typeless, reflect that in the assembly. These are the matching assembly changes for the metadata/value split in r223802. - Only use the `metadata` type when referencing metadata from a call intrinsic -- i.e., only when it's used as a `Value`. - Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode` when referencing it from call intrinsics. So, assembly like this: define @foo(i32 %v) { call void @llvm.foo(metadata !{i32 %v}, metadata !0) call void @llvm.foo(metadata !{i32 7}, metadata !0) call void @llvm.foo(metadata !1, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{metadata !3}, metadata !0) ret void, !bar !2 } !0 = metadata !{metadata !2} !1 = metadata !{i32* @global} !2 = metadata !{metadata !3} !3 = metadata !{} turns into this: define @foo(i32 %v) { call void @llvm.foo(metadata i32 %v, metadata !0) call void @llvm.foo(metadata i32 7, metadata !0) call void @llvm.foo(metadata i32* @global, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{!3}, metadata !0) ret void, !bar !2 } !0 = !{!2} !1 = !{i32* @global} !2 = !{!3} !3 = !{} I wrote an upgrade script that handled almost all of the tests in llvm and many of the tests in cfe (even handling many `CHECK` lines). I've attached it (or will attach it in a moment if you're speedy) to PR21532 to help everyone update their out-of-tree testcases. This is part of PR21532. llvm-svn: 224257
2014-12-16 03:07:53 +08:00
!9 = !{i32 2, !"Dwarf Version", i32 4}
DebugInfo: Move new hierarchy into place Move the specialized metadata nodes for the new debug info hierarchy into place, finishing off PR22464. I've done bootstraps (and all that) and I'm confident this commit is NFC as far as DWARF output is concerned. Let me know if I'm wrong :). The code changes are fairly mechanical: - Bumped the "Debug Info Version". - `DIBuilder` now creates the appropriate subclass of `MDNode`. - Subclasses of DIDescriptor now expect to hold their "MD" counterparts (e.g., `DIBasicType` expects `MDBasicType`). - Deleted a ton of dead code in `AsmWriter.cpp` and `DebugInfo.cpp` for printing comments. - Big update to LangRef to describe the nodes in the new hierarchy. Feel free to make it better. Testcase changes are enormous. There's an accompanying clang commit on its way. If you have out-of-tree debug info testcases, I just broke your build. - `upgrade-specialized-nodes.sh` is attached to PR22564. I used it to update all the IR testcases. - Unfortunately I failed to find way to script the updates to CHECK lines, so I updated all of these by hand. This was fairly painful, since the old CHECKs are difficult to reason about. That's one of the benefits of the new hierarchy. This work isn't quite finished, BTW. The `DIDescriptor` subclasses are almost empty wrappers, but not quite: they still have loose casting checks (see the `RETURN_FROM_RAW()` macro). Once they're completely gutted, I'll rename the "MD" classes to "DI" and kill the wrappers. I also expect to make a few schema changes now that it's easier to reason about everything. llvm-svn: 231082
2015-03-04 01:24:31 +08:00
!10 = !{i32 2, !"Debug Info Version", i32 3}
IR: Make metadata typeless in assembly Now that `Metadata` is typeless, reflect that in the assembly. These are the matching assembly changes for the metadata/value split in r223802. - Only use the `metadata` type when referencing metadata from a call intrinsic -- i.e., only when it's used as a `Value`. - Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode` when referencing it from call intrinsics. So, assembly like this: define @foo(i32 %v) { call void @llvm.foo(metadata !{i32 %v}, metadata !0) call void @llvm.foo(metadata !{i32 7}, metadata !0) call void @llvm.foo(metadata !1, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{metadata !3}, metadata !0) ret void, !bar !2 } !0 = metadata !{metadata !2} !1 = metadata !{i32* @global} !2 = metadata !{metadata !3} !3 = metadata !{} turns into this: define @foo(i32 %v) { call void @llvm.foo(metadata i32 %v, metadata !0) call void @llvm.foo(metadata i32 7, metadata !0) call void @llvm.foo(metadata i32* @global, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{!3}, metadata !0) ret void, !bar !2 } !0 = !{!2} !1 = !{i32* @global} !2 = !{!3} !3 = !{} I wrote an upgrade script that handled almost all of the tests in llvm and many of the tests in cfe (even handling many `CHECK` lines). I've attached it (or will attach it in a moment if you're speedy) to PR21532 to help everyone update their out-of-tree testcases. This is part of PR21532. llvm-svn: 224257
2014-12-16 03:07:53 +08:00
!11 = !{!"clang version 3.5.0 (209308)"}
DI: Remove DW_TAG_arg_variable and DW_TAG_auto_variable Remove the fake `DW_TAG_auto_variable` and `DW_TAG_arg_variable` tags, using `DW_TAG_variable` in their place Stop exposing the `tag:` field at all in the assembly format for `DILocalVariable`. Most of the testcase updates were generated by the following sed script: find test/ -name "*.ll" -o -name "*.mir" | xargs grep -l 'DILocalVariable' | xargs sed -i '' \ -e 's/tag: DW_TAG_arg_variable, //' \ -e 's/tag: DW_TAG_auto_variable, //' There were only a handful of tests in `test/Assembly` that I needed to update by hand. (Note: a follow-up could change `DILocalVariable::DILocalVariable()` to set the tag to `DW_TAG_formal_parameter` instead of `DW_TAG_variable` (as appropriate), instead of having that logic magically in the backend in `DbgVariable`. I've added a FIXME to that effect.) llvm-svn: 243774
2015-08-01 02:58:39 +08:00
!12 = !DILocalVariable(name: "y", line: 1, arg: 1, scope: !4, file: !5, type: !8)
IR: Give 'DI' prefix to debug info metadata Finish off PR23080 by renaming the debug info IR constructs from `MD*` to `DI*`. The last of the `DIDescriptor` classes were deleted in r235356, and the last of the related typedefs removed in r235413, so this has all baked for about a week. Note: If you have out-of-tree code (like a frontend), I recommend that you get everything compiling and tests passing with the *previous* commit before updating to this one. It'll be easier to keep track of what code is using the `DIDescriptor` hierarchy and what you've already updated, and I think you're extremely unlikely to insert bugs. YMMV of course. Back to *this* commit: I did this using the rename-md-di-nodes.sh upgrade script I've attached to PR23080 (both code and testcases) and filtered through clang-format-diff.py. I edited the tests for test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns were off-by-three. It should work on your out-of-tree testcases (and code, if you've followed the advice in the previous paragraph). Some of the tests are in badly named files now (e.g., test/Assembler/invalid-mdcompositetype-missing-tag.ll should be 'dicompositetype'); I'll come back and move the files in a follow-up commit. llvm-svn: 236120
2015-04-30 00:38:44 +08:00
!13 = !DILocation(line: 2, scope: !4)
!14 = !DIExpression(DW_OP_deref)