llvm-project/clang/test/Driver/riscv-arch.c

318 lines
15 KiB
C
Raw Normal View History

[RISCV] More validations on the input value of -march= Supporting additional rules for parsing ISA string. - RISC-V ISA strings must be lowercase. E.g.: rv32IMC is not supported, rv32imc is correct. - Multi-letter extensions are to be separated by a single underscore '_'. The extension prefix counts as a letter. This means extensions that start with 's', 'sx' and 'sx' are all multi-letter. E.g.: xasb is a single non-standard extension named 'xasb' xa_sb are two extensions, the non-standard user level extension 'xa', and the supervisor level extension 'sb'. - Standard user-level extensions are specified following a canonical order, according to Table 22.1 in RISC-V User-Level ISA V2.2. - Non-standard user-level 'x' extensions, standard supervisor-level 's' extensions and non-standard supervisor-level 'sx' extensions are also specified following a canonical order according to Table 22.1 in RISC-V User-Level ISA V2.2: 'x' extensions, follwed by 's' extensions and then 'sx' extensions. - Extensions might have a version number. Underscores may be used to separate ISA subset components to improve readability and to provide disambiguation. E.g.: rv32i2_m3_a1_f2_d2 - Version numbers are divided into major and minor numbers, separated by a 'p'. If the minor version is 0, then 'p0' can be omitted. - Additional checks for dependent extensions and invalid extensions combinations. E.g.: 'e' requires rv32 'e' can't be combined with 'f' nor 'd' 'q' requires rv64 - TODO items have also been marked with comments in the code. Reviewers: asb, kito-cheng Reviewed By: asb Subscribers: edward-jones, mgrang, zzheng, rbar, johnrusso, simoncook, jordy.potman.lists, sabuasal, niosHD, shiva0217, cfe-commits Differential Revision: https://reviews.llvm.org/D45284 llvm-svn: 330880
2018-04-26 06:42:38 +08:00
// RUN: %clang -target riscv32-unknown-elf -march=rv32i -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck %s
// RUN: %clang -target riscv32-unknown-elf -march=rv32im -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck %s
// RUN: %clang -target riscv32-unknown-elf -march=rv32ima -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck %s
// RUN: %clang -target riscv32-unknown-elf -march=rv32imaf -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck %s
// RUN: %clang -target riscv32-unknown-elf -march=rv32imafd -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck %s
// RUN: %clang -target riscv32-unknown-elf -march=rv32ic -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck %s
// RUN: %clang -target riscv32-unknown-elf -march=rv32imc -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck %s
// RUN: %clang -target riscv32-unknown-elf -march=rv32imac -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck %s
// RUN: %clang -target riscv32-unknown-elf -march=rv32imafc -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck %s
// RUN: %clang -target riscv32-unknown-elf -march=rv32imafdc -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck %s
// RUN: %clang -target riscv32-unknown-elf -march=rv32ia -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck %s
// RUN: %clang -target riscv32-unknown-elf -march=rv32iaf -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck %s
// RUN: %clang -target riscv32-unknown-elf -march=rv32iafd -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck %s
// RUN: %clang -target riscv32-unknown-elf -march=rv32iac -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck %s
// RUN: %clang -target riscv32-unknown-elf -march=rv32iafc -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck %s
// RUN: %clang -target riscv32-unknown-elf -march=rv32iafdc -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck %s
// RUN: %clang -target riscv32-unknown-elf -march=rv32g -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck %s
// RUN: %clang -target riscv32-unknown-elf -march=rv32gc -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck %s
// RUN: %clang -target riscv64-unknown-elf -march=rv64i -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck %s
// RUN: %clang -target riscv64-unknown-elf -march=rv64im -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck %s
// RUN: %clang -target riscv64-unknown-elf -march=rv64ima -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck %s
// RUN: %clang -target riscv64-unknown-elf -march=rv64imaf -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck %s
// RUN: %clang -target riscv64-unknown-elf -march=rv64imafd -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck %s
// RUN: %clang -target riscv64-unknown-elf -march=rv64ic -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck %s
// RUN: %clang -target riscv64-unknown-elf -march=rv64imc -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck %s
// RUN: %clang -target riscv64-unknown-elf -march=rv64imac -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck %s
// RUN: %clang -target riscv64-unknown-elf -march=rv64imafc -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck %s
// RUN: %clang -target riscv64-unknown-elf -march=rv64imafdc -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck %s
// RUN: %clang -target riscv64-unknown-elf -march=rv64ia -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck %s
// RUN: %clang -target riscv64-unknown-elf -march=rv64iaf -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck %s
// RUN: %clang -target riscv64-unknown-elf -march=rv64iafd -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck %s
// RUN: %clang -target riscv64-unknown-elf -march=rv64iac -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck %s
// RUN: %clang -target riscv64-unknown-elf -march=rv64iafc -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck %s
// RUN: %clang -target riscv64-unknown-elf -march=rv64iafdc -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck %s
// RUN: %clang -target riscv64-unknown-elf -march=rv64g -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck %s
// RUN: %clang -target riscv64-unknown-elf -march=rv64gc -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck %s
// CHECK-NOT: error: invalid arch name '
[RISCV] More validations on the input value of -march= Supporting additional rules for parsing ISA string. - RISC-V ISA strings must be lowercase. E.g.: rv32IMC is not supported, rv32imc is correct. - Multi-letter extensions are to be separated by a single underscore '_'. The extension prefix counts as a letter. This means extensions that start with 's', 'sx' and 'sx' are all multi-letter. E.g.: xasb is a single non-standard extension named 'xasb' xa_sb are two extensions, the non-standard user level extension 'xa', and the supervisor level extension 'sb'. - Standard user-level extensions are specified following a canonical order, according to Table 22.1 in RISC-V User-Level ISA V2.2. - Non-standard user-level 'x' extensions, standard supervisor-level 's' extensions and non-standard supervisor-level 'sx' extensions are also specified following a canonical order according to Table 22.1 in RISC-V User-Level ISA V2.2: 'x' extensions, follwed by 's' extensions and then 'sx' extensions. - Extensions might have a version number. Underscores may be used to separate ISA subset components to improve readability and to provide disambiguation. E.g.: rv32i2_m3_a1_f2_d2 - Version numbers are divided into major and minor numbers, separated by a 'p'. If the minor version is 0, then 'p0' can be omitted. - Additional checks for dependent extensions and invalid extensions combinations. E.g.: 'e' requires rv32 'e' can't be combined with 'f' nor 'd' 'q' requires rv64 - TODO items have also been marked with comments in the code. Reviewers: asb, kito-cheng Reviewed By: asb Subscribers: edward-jones, mgrang, zzheng, rbar, johnrusso, simoncook, jordy.potman.lists, sabuasal, niosHD, shiva0217, cfe-commits Differential Revision: https://reviews.llvm.org/D45284 llvm-svn: 330880
2018-04-26 06:42:38 +08:00
// RUN: %clang -target riscv32-unknown-elf -march=rv32 -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck -check-prefix=RV32 %s
// RV32: error: invalid arch name 'rv32'
[RISCV] More validations on the input value of -march= Supporting additional rules for parsing ISA string. - RISC-V ISA strings must be lowercase. E.g.: rv32IMC is not supported, rv32imc is correct. - Multi-letter extensions are to be separated by a single underscore '_'. The extension prefix counts as a letter. This means extensions that start with 's', 'sx' and 'sx' are all multi-letter. E.g.: xasb is a single non-standard extension named 'xasb' xa_sb are two extensions, the non-standard user level extension 'xa', and the supervisor level extension 'sb'. - Standard user-level extensions are specified following a canonical order, according to Table 22.1 in RISC-V User-Level ISA V2.2. - Non-standard user-level 'x' extensions, standard supervisor-level 's' extensions and non-standard supervisor-level 'sx' extensions are also specified following a canonical order according to Table 22.1 in RISC-V User-Level ISA V2.2: 'x' extensions, follwed by 's' extensions and then 'sx' extensions. - Extensions might have a version number. Underscores may be used to separate ISA subset components to improve readability and to provide disambiguation. E.g.: rv32i2_m3_a1_f2_d2 - Version numbers are divided into major and minor numbers, separated by a 'p'. If the minor version is 0, then 'p0' can be omitted. - Additional checks for dependent extensions and invalid extensions combinations. E.g.: 'e' requires rv32 'e' can't be combined with 'f' nor 'd' 'q' requires rv64 - TODO items have also been marked with comments in the code. Reviewers: asb, kito-cheng Reviewed By: asb Subscribers: edward-jones, mgrang, zzheng, rbar, johnrusso, simoncook, jordy.potman.lists, sabuasal, niosHD, shiva0217, cfe-commits Differential Revision: https://reviews.llvm.org/D45284 llvm-svn: 330880
2018-04-26 06:42:38 +08:00
// RUN: %clang -target riscv32-unknown-elf -march=rv32m -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck -check-prefix=RV32M %s
// RV32M: error: invalid arch name 'rv32m'
[RISCV] More validations on the input value of -march= Supporting additional rules for parsing ISA string. - RISC-V ISA strings must be lowercase. E.g.: rv32IMC is not supported, rv32imc is correct. - Multi-letter extensions are to be separated by a single underscore '_'. The extension prefix counts as a letter. This means extensions that start with 's', 'sx' and 'sx' are all multi-letter. E.g.: xasb is a single non-standard extension named 'xasb' xa_sb are two extensions, the non-standard user level extension 'xa', and the supervisor level extension 'sb'. - Standard user-level extensions are specified following a canonical order, according to Table 22.1 in RISC-V User-Level ISA V2.2. - Non-standard user-level 'x' extensions, standard supervisor-level 's' extensions and non-standard supervisor-level 'sx' extensions are also specified following a canonical order according to Table 22.1 in RISC-V User-Level ISA V2.2: 'x' extensions, follwed by 's' extensions and then 'sx' extensions. - Extensions might have a version number. Underscores may be used to separate ISA subset components to improve readability and to provide disambiguation. E.g.: rv32i2_m3_a1_f2_d2 - Version numbers are divided into major and minor numbers, separated by a 'p'. If the minor version is 0, then 'p0' can be omitted. - Additional checks for dependent extensions and invalid extensions combinations. E.g.: 'e' requires rv32 'e' can't be combined with 'f' nor 'd' 'q' requires rv64 - TODO items have also been marked with comments in the code. Reviewers: asb, kito-cheng Reviewed By: asb Subscribers: edward-jones, mgrang, zzheng, rbar, johnrusso, simoncook, jordy.potman.lists, sabuasal, niosHD, shiva0217, cfe-commits Differential Revision: https://reviews.llvm.org/D45284 llvm-svn: 330880
2018-04-26 06:42:38 +08:00
// RUN: %clang -target riscv32-unknown-elf -march=rv32id -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck -check-prefix=RV32ID %s
// RV32ID: error: invalid arch name 'rv32id'
[RISCV] More validations on the input value of -march= Supporting additional rules for parsing ISA string. - RISC-V ISA strings must be lowercase. E.g.: rv32IMC is not supported, rv32imc is correct. - Multi-letter extensions are to be separated by a single underscore '_'. The extension prefix counts as a letter. This means extensions that start with 's', 'sx' and 'sx' are all multi-letter. E.g.: xasb is a single non-standard extension named 'xasb' xa_sb are two extensions, the non-standard user level extension 'xa', and the supervisor level extension 'sb'. - Standard user-level extensions are specified following a canonical order, according to Table 22.1 in RISC-V User-Level ISA V2.2. - Non-standard user-level 'x' extensions, standard supervisor-level 's' extensions and non-standard supervisor-level 'sx' extensions are also specified following a canonical order according to Table 22.1 in RISC-V User-Level ISA V2.2: 'x' extensions, follwed by 's' extensions and then 'sx' extensions. - Extensions might have a version number. Underscores may be used to separate ISA subset components to improve readability and to provide disambiguation. E.g.: rv32i2_m3_a1_f2_d2 - Version numbers are divided into major and minor numbers, separated by a 'p'. If the minor version is 0, then 'p0' can be omitted. - Additional checks for dependent extensions and invalid extensions combinations. E.g.: 'e' requires rv32 'e' can't be combined with 'f' nor 'd' 'q' requires rv64 - TODO items have also been marked with comments in the code. Reviewers: asb, kito-cheng Reviewed By: asb Subscribers: edward-jones, mgrang, zzheng, rbar, johnrusso, simoncook, jordy.potman.lists, sabuasal, niosHD, shiva0217, cfe-commits Differential Revision: https://reviews.llvm.org/D45284 llvm-svn: 330880
2018-04-26 06:42:38 +08:00
// RUN: %clang -target riscv32-unknown-elf -march=rv32l -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck -check-prefix=RV32L %s
// RV32L: error: invalid arch name 'rv32l'
[RISCV] More validations on the input value of -march= Supporting additional rules for parsing ISA string. - RISC-V ISA strings must be lowercase. E.g.: rv32IMC is not supported, rv32imc is correct. - Multi-letter extensions are to be separated by a single underscore '_'. The extension prefix counts as a letter. This means extensions that start with 's', 'sx' and 'sx' are all multi-letter. E.g.: xasb is a single non-standard extension named 'xasb' xa_sb are two extensions, the non-standard user level extension 'xa', and the supervisor level extension 'sb'. - Standard user-level extensions are specified following a canonical order, according to Table 22.1 in RISC-V User-Level ISA V2.2. - Non-standard user-level 'x' extensions, standard supervisor-level 's' extensions and non-standard supervisor-level 'sx' extensions are also specified following a canonical order according to Table 22.1 in RISC-V User-Level ISA V2.2: 'x' extensions, follwed by 's' extensions and then 'sx' extensions. - Extensions might have a version number. Underscores may be used to separate ISA subset components to improve readability and to provide disambiguation. E.g.: rv32i2_m3_a1_f2_d2 - Version numbers are divided into major and minor numbers, separated by a 'p'. If the minor version is 0, then 'p0' can be omitted. - Additional checks for dependent extensions and invalid extensions combinations. E.g.: 'e' requires rv32 'e' can't be combined with 'f' nor 'd' 'q' requires rv64 - TODO items have also been marked with comments in the code. Reviewers: asb, kito-cheng Reviewed By: asb Subscribers: edward-jones, mgrang, zzheng, rbar, johnrusso, simoncook, jordy.potman.lists, sabuasal, niosHD, shiva0217, cfe-commits Differential Revision: https://reviews.llvm.org/D45284 llvm-svn: 330880
2018-04-26 06:42:38 +08:00
// RUN: %clang -target riscv32-unknown-elf -march=rv32imadf -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck -check-prefix=RV32IMADF %s
// RV32IMADF: error: invalid arch name 'rv32imadf'
[RISCV] More validations on the input value of -march= Supporting additional rules for parsing ISA string. - RISC-V ISA strings must be lowercase. E.g.: rv32IMC is not supported, rv32imc is correct. - Multi-letter extensions are to be separated by a single underscore '_'. The extension prefix counts as a letter. This means extensions that start with 's', 'sx' and 'sx' are all multi-letter. E.g.: xasb is a single non-standard extension named 'xasb' xa_sb are two extensions, the non-standard user level extension 'xa', and the supervisor level extension 'sb'. - Standard user-level extensions are specified following a canonical order, according to Table 22.1 in RISC-V User-Level ISA V2.2. - Non-standard user-level 'x' extensions, standard supervisor-level 's' extensions and non-standard supervisor-level 'sx' extensions are also specified following a canonical order according to Table 22.1 in RISC-V User-Level ISA V2.2: 'x' extensions, follwed by 's' extensions and then 'sx' extensions. - Extensions might have a version number. Underscores may be used to separate ISA subset components to improve readability and to provide disambiguation. E.g.: rv32i2_m3_a1_f2_d2 - Version numbers are divided into major and minor numbers, separated by a 'p'. If the minor version is 0, then 'p0' can be omitted. - Additional checks for dependent extensions and invalid extensions combinations. E.g.: 'e' requires rv32 'e' can't be combined with 'f' nor 'd' 'q' requires rv64 - TODO items have also been marked with comments in the code. Reviewers: asb, kito-cheng Reviewed By: asb Subscribers: edward-jones, mgrang, zzheng, rbar, johnrusso, simoncook, jordy.potman.lists, sabuasal, niosHD, shiva0217, cfe-commits Differential Revision: https://reviews.llvm.org/D45284 llvm-svn: 330880
2018-04-26 06:42:38 +08:00
// RUN: %clang -target riscv32-unknown-elf -march=rv32imm -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck -check-prefix=RV32IMM %s
// RV32IMM: error: invalid arch name 'rv32imm'
[RISCV] More validations on the input value of -march= Supporting additional rules for parsing ISA string. - RISC-V ISA strings must be lowercase. E.g.: rv32IMC is not supported, rv32imc is correct. - Multi-letter extensions are to be separated by a single underscore '_'. The extension prefix counts as a letter. This means extensions that start with 's', 'sx' and 'sx' are all multi-letter. E.g.: xasb is a single non-standard extension named 'xasb' xa_sb are two extensions, the non-standard user level extension 'xa', and the supervisor level extension 'sb'. - Standard user-level extensions are specified following a canonical order, according to Table 22.1 in RISC-V User-Level ISA V2.2. - Non-standard user-level 'x' extensions, standard supervisor-level 's' extensions and non-standard supervisor-level 'sx' extensions are also specified following a canonical order according to Table 22.1 in RISC-V User-Level ISA V2.2: 'x' extensions, follwed by 's' extensions and then 'sx' extensions. - Extensions might have a version number. Underscores may be used to separate ISA subset components to improve readability and to provide disambiguation. E.g.: rv32i2_m3_a1_f2_d2 - Version numbers are divided into major and minor numbers, separated by a 'p'. If the minor version is 0, then 'p0' can be omitted. - Additional checks for dependent extensions and invalid extensions combinations. E.g.: 'e' requires rv32 'e' can't be combined with 'f' nor 'd' 'q' requires rv64 - TODO items have also been marked with comments in the code. Reviewers: asb, kito-cheng Reviewed By: asb Subscribers: edward-jones, mgrang, zzheng, rbar, johnrusso, simoncook, jordy.potman.lists, sabuasal, niosHD, shiva0217, cfe-commits Differential Revision: https://reviews.llvm.org/D45284 llvm-svn: 330880
2018-04-26 06:42:38 +08:00
// RUN: %clang -target riscv32-unknown-elf -march=RV32I -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck -check-prefix=RV32I-UPPER %s
// RV32I-UPPER: error: invalid arch name 'RV32I'
[RISCV] More validations on the input value of -march= Supporting additional rules for parsing ISA string. - RISC-V ISA strings must be lowercase. E.g.: rv32IMC is not supported, rv32imc is correct. - Multi-letter extensions are to be separated by a single underscore '_'. The extension prefix counts as a letter. This means extensions that start with 's', 'sx' and 'sx' are all multi-letter. E.g.: xasb is a single non-standard extension named 'xasb' xa_sb are two extensions, the non-standard user level extension 'xa', and the supervisor level extension 'sb'. - Standard user-level extensions are specified following a canonical order, according to Table 22.1 in RISC-V User-Level ISA V2.2. - Non-standard user-level 'x' extensions, standard supervisor-level 's' extensions and non-standard supervisor-level 'sx' extensions are also specified following a canonical order according to Table 22.1 in RISC-V User-Level ISA V2.2: 'x' extensions, follwed by 's' extensions and then 'sx' extensions. - Extensions might have a version number. Underscores may be used to separate ISA subset components to improve readability and to provide disambiguation. E.g.: rv32i2_m3_a1_f2_d2 - Version numbers are divided into major and minor numbers, separated by a 'p'. If the minor version is 0, then 'p0' can be omitted. - Additional checks for dependent extensions and invalid extensions combinations. E.g.: 'e' requires rv32 'e' can't be combined with 'f' nor 'd' 'q' requires rv64 - TODO items have also been marked with comments in the code. Reviewers: asb, kito-cheng Reviewed By: asb Subscribers: edward-jones, mgrang, zzheng, rbar, johnrusso, simoncook, jordy.potman.lists, sabuasal, niosHD, shiva0217, cfe-commits Differential Revision: https://reviews.llvm.org/D45284 llvm-svn: 330880
2018-04-26 06:42:38 +08:00
// RUN: %clang -target riscv64-unknown-elf -march=rv64 -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck -check-prefix=RV64 %s
// RV64: error: invalid arch name 'rv64'
[RISCV] More validations on the input value of -march= Supporting additional rules for parsing ISA string. - RISC-V ISA strings must be lowercase. E.g.: rv32IMC is not supported, rv32imc is correct. - Multi-letter extensions are to be separated by a single underscore '_'. The extension prefix counts as a letter. This means extensions that start with 's', 'sx' and 'sx' are all multi-letter. E.g.: xasb is a single non-standard extension named 'xasb' xa_sb are two extensions, the non-standard user level extension 'xa', and the supervisor level extension 'sb'. - Standard user-level extensions are specified following a canonical order, according to Table 22.1 in RISC-V User-Level ISA V2.2. - Non-standard user-level 'x' extensions, standard supervisor-level 's' extensions and non-standard supervisor-level 'sx' extensions are also specified following a canonical order according to Table 22.1 in RISC-V User-Level ISA V2.2: 'x' extensions, follwed by 's' extensions and then 'sx' extensions. - Extensions might have a version number. Underscores may be used to separate ISA subset components to improve readability and to provide disambiguation. E.g.: rv32i2_m3_a1_f2_d2 - Version numbers are divided into major and minor numbers, separated by a 'p'. If the minor version is 0, then 'p0' can be omitted. - Additional checks for dependent extensions and invalid extensions combinations. E.g.: 'e' requires rv32 'e' can't be combined with 'f' nor 'd' 'q' requires rv64 - TODO items have also been marked with comments in the code. Reviewers: asb, kito-cheng Reviewed By: asb Subscribers: edward-jones, mgrang, zzheng, rbar, johnrusso, simoncook, jordy.potman.lists, sabuasal, niosHD, shiva0217, cfe-commits Differential Revision: https://reviews.llvm.org/D45284 llvm-svn: 330880
2018-04-26 06:42:38 +08:00
// RUN: %clang -target riscv64-unknown-elf -march=rv64m -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck -check-prefix=RV64M %s
// RV64M: error: invalid arch name 'rv64m'
[RISCV] More validations on the input value of -march= Supporting additional rules for parsing ISA string. - RISC-V ISA strings must be lowercase. E.g.: rv32IMC is not supported, rv32imc is correct. - Multi-letter extensions are to be separated by a single underscore '_'. The extension prefix counts as a letter. This means extensions that start with 's', 'sx' and 'sx' are all multi-letter. E.g.: xasb is a single non-standard extension named 'xasb' xa_sb are two extensions, the non-standard user level extension 'xa', and the supervisor level extension 'sb'. - Standard user-level extensions are specified following a canonical order, according to Table 22.1 in RISC-V User-Level ISA V2.2. - Non-standard user-level 'x' extensions, standard supervisor-level 's' extensions and non-standard supervisor-level 'sx' extensions are also specified following a canonical order according to Table 22.1 in RISC-V User-Level ISA V2.2: 'x' extensions, follwed by 's' extensions and then 'sx' extensions. - Extensions might have a version number. Underscores may be used to separate ISA subset components to improve readability and to provide disambiguation. E.g.: rv32i2_m3_a1_f2_d2 - Version numbers are divided into major and minor numbers, separated by a 'p'. If the minor version is 0, then 'p0' can be omitted. - Additional checks for dependent extensions and invalid extensions combinations. E.g.: 'e' requires rv32 'e' can't be combined with 'f' nor 'd' 'q' requires rv64 - TODO items have also been marked with comments in the code. Reviewers: asb, kito-cheng Reviewed By: asb Subscribers: edward-jones, mgrang, zzheng, rbar, johnrusso, simoncook, jordy.potman.lists, sabuasal, niosHD, shiva0217, cfe-commits Differential Revision: https://reviews.llvm.org/D45284 llvm-svn: 330880
2018-04-26 06:42:38 +08:00
// RUN: %clang -target riscv64-unknown-elf -march=rv64id -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck -check-prefix=RV64ID %s
// RV64ID: error: invalid arch name 'rv64id'
[RISCV] More validations on the input value of -march= Supporting additional rules for parsing ISA string. - RISC-V ISA strings must be lowercase. E.g.: rv32IMC is not supported, rv32imc is correct. - Multi-letter extensions are to be separated by a single underscore '_'. The extension prefix counts as a letter. This means extensions that start with 's', 'sx' and 'sx' are all multi-letter. E.g.: xasb is a single non-standard extension named 'xasb' xa_sb are two extensions, the non-standard user level extension 'xa', and the supervisor level extension 'sb'. - Standard user-level extensions are specified following a canonical order, according to Table 22.1 in RISC-V User-Level ISA V2.2. - Non-standard user-level 'x' extensions, standard supervisor-level 's' extensions and non-standard supervisor-level 'sx' extensions are also specified following a canonical order according to Table 22.1 in RISC-V User-Level ISA V2.2: 'x' extensions, follwed by 's' extensions and then 'sx' extensions. - Extensions might have a version number. Underscores may be used to separate ISA subset components to improve readability and to provide disambiguation. E.g.: rv32i2_m3_a1_f2_d2 - Version numbers are divided into major and minor numbers, separated by a 'p'. If the minor version is 0, then 'p0' can be omitted. - Additional checks for dependent extensions and invalid extensions combinations. E.g.: 'e' requires rv32 'e' can't be combined with 'f' nor 'd' 'q' requires rv64 - TODO items have also been marked with comments in the code. Reviewers: asb, kito-cheng Reviewed By: asb Subscribers: edward-jones, mgrang, zzheng, rbar, johnrusso, simoncook, jordy.potman.lists, sabuasal, niosHD, shiva0217, cfe-commits Differential Revision: https://reviews.llvm.org/D45284 llvm-svn: 330880
2018-04-26 06:42:38 +08:00
// RUN: %clang -target riscv64-unknown-elf -march=rv64l -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck -check-prefix=RV64L %s
// RV64L: error: invalid arch name 'rv64l'
[RISCV] More validations on the input value of -march= Supporting additional rules for parsing ISA string. - RISC-V ISA strings must be lowercase. E.g.: rv32IMC is not supported, rv32imc is correct. - Multi-letter extensions are to be separated by a single underscore '_'. The extension prefix counts as a letter. This means extensions that start with 's', 'sx' and 'sx' are all multi-letter. E.g.: xasb is a single non-standard extension named 'xasb' xa_sb are two extensions, the non-standard user level extension 'xa', and the supervisor level extension 'sb'. - Standard user-level extensions are specified following a canonical order, according to Table 22.1 in RISC-V User-Level ISA V2.2. - Non-standard user-level 'x' extensions, standard supervisor-level 's' extensions and non-standard supervisor-level 'sx' extensions are also specified following a canonical order according to Table 22.1 in RISC-V User-Level ISA V2.2: 'x' extensions, follwed by 's' extensions and then 'sx' extensions. - Extensions might have a version number. Underscores may be used to separate ISA subset components to improve readability and to provide disambiguation. E.g.: rv32i2_m3_a1_f2_d2 - Version numbers are divided into major and minor numbers, separated by a 'p'. If the minor version is 0, then 'p0' can be omitted. - Additional checks for dependent extensions and invalid extensions combinations. E.g.: 'e' requires rv32 'e' can't be combined with 'f' nor 'd' 'q' requires rv64 - TODO items have also been marked with comments in the code. Reviewers: asb, kito-cheng Reviewed By: asb Subscribers: edward-jones, mgrang, zzheng, rbar, johnrusso, simoncook, jordy.potman.lists, sabuasal, niosHD, shiva0217, cfe-commits Differential Revision: https://reviews.llvm.org/D45284 llvm-svn: 330880
2018-04-26 06:42:38 +08:00
// RUN: %clang -target riscv64-unknown-elf -march=rv64imadf -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck -check-prefix=RV64IMADF %s
// RV64IMADF: error: invalid arch name 'rv64imadf'
[RISCV] More validations on the input value of -march= Supporting additional rules for parsing ISA string. - RISC-V ISA strings must be lowercase. E.g.: rv32IMC is not supported, rv32imc is correct. - Multi-letter extensions are to be separated by a single underscore '_'. The extension prefix counts as a letter. This means extensions that start with 's', 'sx' and 'sx' are all multi-letter. E.g.: xasb is a single non-standard extension named 'xasb' xa_sb are two extensions, the non-standard user level extension 'xa', and the supervisor level extension 'sb'. - Standard user-level extensions are specified following a canonical order, according to Table 22.1 in RISC-V User-Level ISA V2.2. - Non-standard user-level 'x' extensions, standard supervisor-level 's' extensions and non-standard supervisor-level 'sx' extensions are also specified following a canonical order according to Table 22.1 in RISC-V User-Level ISA V2.2: 'x' extensions, follwed by 's' extensions and then 'sx' extensions. - Extensions might have a version number. Underscores may be used to separate ISA subset components to improve readability and to provide disambiguation. E.g.: rv32i2_m3_a1_f2_d2 - Version numbers are divided into major and minor numbers, separated by a 'p'. If the minor version is 0, then 'p0' can be omitted. - Additional checks for dependent extensions and invalid extensions combinations. E.g.: 'e' requires rv32 'e' can't be combined with 'f' nor 'd' 'q' requires rv64 - TODO items have also been marked with comments in the code. Reviewers: asb, kito-cheng Reviewed By: asb Subscribers: edward-jones, mgrang, zzheng, rbar, johnrusso, simoncook, jordy.potman.lists, sabuasal, niosHD, shiva0217, cfe-commits Differential Revision: https://reviews.llvm.org/D45284 llvm-svn: 330880
2018-04-26 06:42:38 +08:00
// RUN: %clang -target riscv64-unknown-elf -march=rv64imm -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck -check-prefix=RV64IMM %s
// RV64IMM: error: invalid arch name 'rv64imm'
[RISCV] More validations on the input value of -march= Supporting additional rules for parsing ISA string. - RISC-V ISA strings must be lowercase. E.g.: rv32IMC is not supported, rv32imc is correct. - Multi-letter extensions are to be separated by a single underscore '_'. The extension prefix counts as a letter. This means extensions that start with 's', 'sx' and 'sx' are all multi-letter. E.g.: xasb is a single non-standard extension named 'xasb' xa_sb are two extensions, the non-standard user level extension 'xa', and the supervisor level extension 'sb'. - Standard user-level extensions are specified following a canonical order, according to Table 22.1 in RISC-V User-Level ISA V2.2. - Non-standard user-level 'x' extensions, standard supervisor-level 's' extensions and non-standard supervisor-level 'sx' extensions are also specified following a canonical order according to Table 22.1 in RISC-V User-Level ISA V2.2: 'x' extensions, follwed by 's' extensions and then 'sx' extensions. - Extensions might have a version number. Underscores may be used to separate ISA subset components to improve readability and to provide disambiguation. E.g.: rv32i2_m3_a1_f2_d2 - Version numbers are divided into major and minor numbers, separated by a 'p'. If the minor version is 0, then 'p0' can be omitted. - Additional checks for dependent extensions and invalid extensions combinations. E.g.: 'e' requires rv32 'e' can't be combined with 'f' nor 'd' 'q' requires rv64 - TODO items have also been marked with comments in the code. Reviewers: asb, kito-cheng Reviewed By: asb Subscribers: edward-jones, mgrang, zzheng, rbar, johnrusso, simoncook, jordy.potman.lists, sabuasal, niosHD, shiva0217, cfe-commits Differential Revision: https://reviews.llvm.org/D45284 llvm-svn: 330880
2018-04-26 06:42:38 +08:00
// RUN: %clang -target riscv64-unknown-elf -march=RV64I -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck -check-prefix=RV64I-UPPER %s
// RV64I-UPPER: error: invalid arch name 'RV64I'
[RISCV] More validations on the input value of -march= Supporting additional rules for parsing ISA string. - RISC-V ISA strings must be lowercase. E.g.: rv32IMC is not supported, rv32imc is correct. - Multi-letter extensions are to be separated by a single underscore '_'. The extension prefix counts as a letter. This means extensions that start with 's', 'sx' and 'sx' are all multi-letter. E.g.: xasb is a single non-standard extension named 'xasb' xa_sb are two extensions, the non-standard user level extension 'xa', and the supervisor level extension 'sb'. - Standard user-level extensions are specified following a canonical order, according to Table 22.1 in RISC-V User-Level ISA V2.2. - Non-standard user-level 'x' extensions, standard supervisor-level 's' extensions and non-standard supervisor-level 'sx' extensions are also specified following a canonical order according to Table 22.1 in RISC-V User-Level ISA V2.2: 'x' extensions, follwed by 's' extensions and then 'sx' extensions. - Extensions might have a version number. Underscores may be used to separate ISA subset components to improve readability and to provide disambiguation. E.g.: rv32i2_m3_a1_f2_d2 - Version numbers are divided into major and minor numbers, separated by a 'p'. If the minor version is 0, then 'p0' can be omitted. - Additional checks for dependent extensions and invalid extensions combinations. E.g.: 'e' requires rv32 'e' can't be combined with 'f' nor 'd' 'q' requires rv64 - TODO items have also been marked with comments in the code. Reviewers: asb, kito-cheng Reviewed By: asb Subscribers: edward-jones, mgrang, zzheng, rbar, johnrusso, simoncook, jordy.potman.lists, sabuasal, niosHD, shiva0217, cfe-commits Differential Revision: https://reviews.llvm.org/D45284 llvm-svn: 330880
2018-04-26 06:42:38 +08:00
// Testing specific messages and unsupported extensions.
// RUN: %clang -target riscv32-unknown-elf -march=rv32e -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck -check-prefix=RV32E %s
// RV32E: error: invalid arch name 'rv32e',
// RV32E: standard user-level extension 'e'
// RUN: %clang -target riscv64-unknown-elf -march=rv64e -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck -check-prefix=RV64E %s
// RV64E: error: invalid arch name 'rv64e',
// RV64E: standard user-level extension 'e' requires 'rv32'
// RUN: %clang -target riscv32-unknown-elf -march=rv32imC -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck -check-prefix=RV32-LOWER %s
// RV32-LOWER: error: invalid arch name 'rv32imC',
// RV32-LOWER: string must be lowercase
// RUN: %clang -target riscv32-unknown-elf -march=rv32 -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck -check-prefix=RV32-STR %s
// RV32-STR: error: invalid arch name 'rv32',
// RV32-STR: string must begin with rv32{i,e,g} or rv64{i,g}
// RUN: %clang -target riscv32-unknown-elf -march=rv32q -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck -check-prefix=RV32-LETTER %s
// RV32-LETTER: error: invalid arch name 'rv32q',
// RV32-LETTER: first letter should be 'e', 'i' or 'g'
// RUN: %clang -target riscv32-unknown-elf -march=rv32imcq -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck -check-prefix=RV32-ORDER %s
// RV32-ORDER: error: invalid arch name 'rv32imcq',
// RV32-ORDER: standard user-level extension not given in canonical order 'q'
// RUN: %clang -target riscv32-unknown-elf -march=rv32imw -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck -check-prefix=RV32-STD-INVAL %s
// RV32-STD-INVAL: error: invalid arch name 'rv32imw',
// RV32-STD-INVAL: invalid standard user-level extension 'w'
// RUN: %clang -target riscv32-unknown-elf -march=rv32imqc -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck -check-prefix=RV32-STD %s
// RV32-STD: error: invalid arch name 'rv32imqc',
// RV32-STD: unsupported standard user-level extension 'q'
// RUN: %clang -target riscv32-unknown-elf -march=rv32xabc -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck -check-prefix=RV32X %s
// RV32X: error: invalid arch name 'rv32xabc',
// RV32X: first letter should be 'e', 'i' or 'g'
// RUN: %clang -target riscv32-unknown-elf -march=rv32sxabc -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck -check-prefix=RV32SX %s
// RV32SX: error: invalid arch name 'rv32sxabc',
// RV32SX: first letter should be 'e', 'i' or 'g'
// RUN: %clang -target riscv32-unknown-elf -march=rv32sabc -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck -check-prefix=RV32S %s
// RV32S: error: invalid arch name 'rv32sabc',
// RV32S: first letter should be 'e', 'i' or 'g'
// RUN: %clang -target riscv32-unknown-elf -march=rv32ix -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck -check-prefix=RV32X-NAME %s
// RV32X-NAME: error: invalid arch name 'rv32ix',
// RV32X-NAME: non-standard user-level extension name missing after 'x'
// RUN: %clang -target riscv32-unknown-elf -march=rv32isx -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck -check-prefix=RV32SX-NAME %s
// RV32SX-NAME: error: invalid arch name 'rv32isx',
// RV32SX-NAME: non-standard supervisor-level extension
// RV32SX-NAME: name missing after 'sx'
// RUN: %clang -target riscv32-unknown-elf -march=rv32is -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck -check-prefix=RV32S-NAME %s
// RV32S-NAME: error: invalid arch name 'rv32is',
// RV32S-NAME: standard supervisor-level extension
// RV32S-NAME: name missing after 's'
// RUN: %clang -target riscv32-unknown-elf -march=rv32ix_s_sx -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck -check-prefix=RV32ALL-NAME %s
// RV32ALL-NAME: error: invalid arch name 'rv32ix_s_sx',
// RV32ALL-NAME: non-standard user-level extension
// RV32ALL-NAME: name missing after 'x'
// RUN: %clang -target riscv32-unknown-elf -march=rv32ixabc -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck -check-prefix=RV32X-UNS %s
// RV32X-UNS: error: invalid arch name 'rv32ixabc',
// RV32X-UNS: unsupported non-standard user-level extension 'xabc'
// RUN: %clang -target riscv32-unknown-elf -march=rv32isa -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck -check-prefix=RV32S-UNS %s
// RV32S-UNS: error: invalid arch name 'rv32isa',
// RV32S-UNS: unsupported standard supervisor-level extension 'sa'
// RUN: %clang -target riscv32-unknown-elf -march=rv32isxabc -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck -check-prefix=RV32SX-UNS %s
// RV32SX-UNS: error: invalid arch name 'rv32isxabc',
// RV32SX-UNS: unsupported non-standard supervisor-level extension 'sxabc'
// RUN: %clang -target riscv32-unknown-elf -march=rv32ixabc_sp_sxlw -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck -check-prefix=RV32ALL %s
// RV32ALL: error: invalid arch name 'rv32ixabc_sp_sxlw',
// RV32ALL: unsupported non-standard user-level extension 'xabc'
// RUN: %clang -target riscv32-unknown-elf -march=rv32i20 -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck -check-prefix=RV32-IVER %s
// RV32-IVER: error: invalid arch name 'rv32i20', unsupported
// RV32-IVER: version number 20 for extension 'i'
// RUN: %clang -target riscv32-unknown-elf -march=rv32imc5 -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck -check-prefix=RV32-CVER %s
// RV32-CVER: error: invalid arch name 'rv32imc5', unsupported
// RV32-CVER: version number 5 for extension 'c'
// RUN: %clang -target riscv32-unknown-elf -march=rv32i2p -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck -check-prefix=RV32-IMINOR-MISS %s
// RV32-IMINOR-MISS: error: invalid arch name 'rv32i2p',
// RV32-IMINOR-MISS: minor version number missing after 'p' for extension 'i'
// RUN: %clang -target riscv32-unknown-elf -march=rv32i2p0 -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck -check-prefix=RV32-IMINOR0 %s
// RV32-IMINOR0: error: invalid arch name 'rv32i2p0',
// RV32-IMINOR0: unsupported version number 2.0 for extension 'i'
// RUN: %clang -target riscv32-unknown-elf -march=rv32i2p1 -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck -check-prefix=RV32-IMINOR1 %s
// RV32-IMINOR1: error: invalid arch name 'rv32i2p1', unsupported
// RV32-IMINOR1: version number 2.1 for extension 'i'
// RUN: %clang -target riscv32-unknown-elf -march=rv32ix2p -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck -check-prefix=RV32-XMINOR-MISS %s
// RV32-XMINOR-MISS: error: invalid arch name 'rv32ix2p',
// RV32-XMINOR-MISS: minor version number missing after 'p' for extension 'x2p'
// RUN: %clang -target riscv32-unknown-elf -march=rv32is2p0 -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck -check-prefix=RV32-SMINOR0 %s
// RV32-SMINOR0: error: invalid arch name 'rv32is2p0',
// RV32-SMINOR0: unsupported version number 2.0 for extension 's2p0'
// RUN: %clang -target riscv32-unknown-elf -march=rv32isx2p1 -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck -check-prefix=RV32-SXMINOR1 %s
// RV32-SXMINOR1: error: invalid arch name 'rv32isx2p1', unsupported
// RV32-SXMINOR1: version number 2.1 for extension 'sx2p1'
// RUN: %clang -target riscv32-unknown-elf -march=rv32ixabc_ -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck -check-prefix=RV32-XSEP %s
// RV32-XSEP: error: invalid arch name 'rv32ixabc_',
// RV32-XSEP: extension name missing after separator '_'
// RUN: %clang -target riscv32-unknown-elf -march=rv32ixabc_a -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck -check-prefix=RV32-PREFIX %s
// RV32-PREFIX: error: invalid arch name 'rv32ixabc_a',
// RV32-PREFIX: invalid extension prefix 'a'
// RUN: %clang -target riscv32-unknown-elf -march=rv32isabc_xdef -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck -check-prefix=RV32-X-ORDER %s
// RV32-X-ORDER: error: invalid arch name 'rv32isabc_xdef',
// RV32-X-ORDER: non-standard user-level extension not given
// RV32-X-ORDER: in canonical order 'xdef'
// RUN: %clang -target riscv32-unknown-elf -march=rv32isxabc_sdef -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck -check-prefix=RV32-S-ORDER %s
// RV32-S-ORDER: error: invalid arch name 'rv32isxabc_sdef',
// RV32-S-ORDER: standard supervisor-level extension not given
// RV32-S-ORDER: in canonical order 'sdef'
// RUN: %clang -target riscv32-unknown-elf -march=rv32ixabc_xabc -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck -check-prefix=RV32-XDUP %s
// RV32-XDUP: error: invalid arch name 'rv32ixabc_xabc',
// RV32-XDUP: duplicated non-standard user-level extension 'xabc'
// RUN: %clang -target riscv32-unknown-elf -march=rv32ixabc_xdef -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck -check-prefix=RV32-X-X-INVAL %s
// RV32-X-X-INVAL: error: invalid arch name 'rv32ixabc_xdef', unsupported
// RV32-X-X-INVAL: non-standard user-level extension 'xabc'
// RUN: %clang -target riscv32-unknown-elf -march=rv32ixabc_sdef_sxghi -### %s \
// RUN: -fsyntax-only 2>&1 | FileCheck -check-prefix=RV32-X-S-SX-INVAL %s
// RV32-X-S-SX-INVAL: error: invalid arch name 'rv32ixabc_sdef_sxghi',
// RV32-X-S-SX-INVAL: unsupported non-standard user-level extension 'xabc'