maxjhandsome
/
llvm-project
forked from OSchip/llvm-project
1
0
Fork 0
Code Issues Pull Requests Packages Releases Wiki Activity
llvm-project/llvm/test/MC/Mips/mips64r2/valid.s

260 lines
14 KiB
ArmAsm
Raw Normal View History

[mips] Added a full set of instruction test cases for all ISA's (but not ASE's). Summary: Where those ISA's are not currently supported, the test is run with the smallest superset of that ISA. Some instructions are valid but don't pass yet. These have been placed in the valid-xfail.s's which will XPASS if _any_ instruction starts working. The valid.s's do not verify the encoding yet. There are also no tests checking that instructions from neighbouring ISA's are not accepted. Reviewers: matheusalmeida Reviewed By: matheusalmeida Differential Revision: http://llvm-reviews.chandlerc.com/D3214 llvm-svn: 205180
2014-03-31 20:13:12 +08:00
# Instructions that are valid
#
# RUN: llvm-mc %s -triple=mips64-unknown-linux -show-encoding -mcpu=mips64r2 | FileCheck %s
.set noat
[mips] Correct tests that are meant to test valid assembly. They were actually rejected by GAS. Summary: I've noticed a bug in my test generator script that caused 64-bit objects to be disassembled as if it were using the O32 ABI, giving the wrong register names. As a result, it generated assembly files that are rejected by GAS when assembling for the correct ABI. This was caused by the generator setting the ELF e_flags incorrectly before disassembling the object. This patch corrects the invalid tests that have already been committed by replacing the ABI-dependent register names with numeric registers. In addition to fixing the tests this allows the 32-bit and 64-bit ISA tests to be easily diffed to produce the invalid-*.s tests which test that instructions defined in later ISA's are not accepted. Depends on D3648 Reviewers: vmedic Reviewed By: vmedic Differential Revision: http://reviews.llvm.org/D3649 llvm-svn: 208327
2014-05-08 23:17:29 +08:00
abs.d $f7,$f25 # CHECK: encoding:
abs.s $f9,$f16
add $s7,$s2,$a1
add.d $f1,$f7,$f29
add.s $f8,$f21,$f24
addi $13,$9,26322
[mips] Update MipsAsmParser so that it's possible to handle immediates that start with the binary operator NOT (~). Reviewers: dsanders Reviewed By: dsanders Differential Revision: http://reviews.llvm.org/D4158 llvm-svn: 211163
2014-06-18 21:55:18 +08:00
addi $8,$8,~1 # CHECK: addi $8, $8, -2 # encoding: [0x21,0x08,0xff,0xfe]
[mips] Correct tests that are meant to test valid assembly. They were actually rejected by GAS. Summary: I've noticed a bug in my test generator script that caused 64-bit objects to be disassembled as if it were using the O32 ABI, giving the wrong register names. As a result, it generated assembly files that are rejected by GAS when assembling for the correct ABI. This was caused by the generator setting the ELF e_flags incorrectly before disassembling the object. This patch corrects the invalid tests that have already been committed by replacing the ABI-dependent register names with numeric registers. In addition to fixing the tests this allows the 32-bit and 64-bit ISA tests to be easily diffed to produce the invalid-*.s tests which test that instructions defined in later ISA's are not accepted. Depends on D3648 Reviewers: vmedic Reviewed By: vmedic Differential Revision: http://reviews.llvm.org/D3649 llvm-svn: 208327
2014-05-08 23:17:29 +08:00
addu $9,$a0,$a2
and $s7,$v0,$12
[mips] Implement alias for 'and' and 'or' instructions for all ISAs. Summary: Examples: and $2, 4 <=> andi $2, $2, 4 or $2, 4 <=> ori $2, $2, 4 Reviewers: dsanders Reviewed By: dsanders Differential Revision: http://reviews.llvm.org/D4155 llvm-svn: 211161
2014-06-18 21:30:57 +08:00
and $2,4 # CHECK: andi $2, $2, 4 # encoding: [0x30,0x42,0x00,0x04]
[mips][mips64r6] bc1[tf] are not available on MIPS32r6/MIPS64r6 Summary: Also tightened up the acceptable condition operand for these instructions on MIPS-I to MIPS-III. Support for $fcc[1-7] was added in MIPS-IV. Prior to that only $fcc0 is acceptable. We currently don't optimize (BEQZ (NOT $a), $target) and similar. It's probably best to do this in InstCombine. Depends on D4111 Reviewers: jkolek, zoran.jovanovic, vmedic Reviewed By: vmedic Differential Revision: http://reviews.llvm.org/D4112 llvm-svn: 210787
2014-06-12 23:00:17 +08:00
bc1f $fcc0, 4 # CHECK: bc1f 4 # encoding: [0x45,0x00,0x00,0x01]
bc1f $fcc1, 4 # CHECK: bc1f $fcc1, 4 # encoding: [0x45,0x04,0x00,0x01]
bc1f 4 # CHECK: bc1f 4 # encoding: [0x45,0x00,0x00,0x01]
bc1t $fcc0, 4 # CHECK: bc1t 4 # encoding: [0x45,0x01,0x00,0x01]
bc1t $fcc1, 4 # CHECK: bc1t $fcc1, 4 # encoding: [0x45,0x05,0x00,0x01]
bc1t 4 # CHECK: bc1t 4 # encoding: [0x45,0x01,0x00,0x01]
[mips][mips64r6] b(ge|lt)zal are not available on MIPS32r6/MIPS64r6 and bal is a normal instruction Summary: b(ge|lt)zal have been removed in MIPS32r6/MIPS64r6. However, bal (an alias for 'bgezal $zero, $offset') still remains with the same encoding it had prior to MIPS32r6/MIPS64r6. Updated the MipsNaCLELFStreamer, and MipsLongBranch to correctly handle the MIPS32r6/MIPS64r6 BAL instruction in addition to the existing BAL_BR pseudo. No changes were required to the CodeGen test that looks for BAL (test/CodeGen/Mips/longbranch.ll) since the new instruction has the same syntax. Depends on D4113 Reviewers: jkolek, zoran.jovanovic, vmedic Reviewed By: vmedic Differential Revision: http://reviews.llvm.org/D4114 llvm-svn: 210898
2014-06-13 21:02:52 +08:00
bal 21100 # CHECK: bal 21100 # encoding: [0x04,0x11,0x14,0x9b]
bgezal $0, 21100 # CHECK: bal 21100 # encoding: [0x04,0x11,0x14,0x9b]
bgezal $6, 21100 # CHECK: bgezal $6, 21100 # encoding: [0x04,0xd1,0x14,0x9b]
bltzal $6, 21100 # CHECK: bltzal $6, 21100 # encoding: [0x04,0xd0,0x14,0x9b]
[mips] Add cache and pref instructions Summary: cache and pref were added in MIPS-III, and MIPS32 but were re-encoded in MIPS32r6/MIPS64r6 to use a 9-bit offset rather than the 16-bit offset available to earlier cores. Resolved the decoding conflict between pref and lwc3. Depends on D4115 Reviewers: zoran.jovanovic, jkolek, vmedic Reviewed By: vmedic Differential Revision: http://reviews.llvm.org/D4116 llvm-svn: 210900
2014-06-13 21:15:59 +08:00
cache 1, 8($5) # CHECK: cache 1, 8($5) # encoding: [0xbc,0xa1,0x00,0x08]
[mips] Correct tests that are meant to test valid assembly. They were actually rejected by GAS. Summary: I've noticed a bug in my test generator script that caused 64-bit objects to be disassembled as if it were using the O32 ABI, giving the wrong register names. As a result, it generated assembly files that are rejected by GAS when assembling for the correct ABI. This was caused by the generator setting the ELF e_flags incorrectly before disassembling the object. This patch corrects the invalid tests that have already been committed by replacing the ABI-dependent register names with numeric registers. In addition to fixing the tests this allows the 32-bit and 64-bit ISA tests to be easily diffed to produce the invalid-*.s tests which test that instructions defined in later ISA's are not accepted. Depends on D3648 Reviewers: vmedic Reviewed By: vmedic Differential Revision: http://reviews.llvm.org/D3649 llvm-svn: 208327
2014-05-08 23:17:29 +08:00
c.ngl.d $f29,$f29
c.ngle.d $f0,$f16
c.sf.d $f30,$f0
c.sf.s $f14,$f22
ceil.l.d $f1,$f3
ceil.l.s $f18,$f13
ceil.w.d $f11,$f25
ceil.w.s $f6,$f20
cfc1 $s1,$21
[mips][mips64r6] cl[oz], and dcl[oz] are re-encoded in MIPS32r6/MIPS64r6 Summary: There is no change to the restrictions, just the result register is stored once in the encoding rather than twice. The rt field is zero in MIPS32r6/MIPS64r6. Depends on D4119 Reviewers: zoran.jovanovic, jkolek, vmedic Reviewed By: vmedic Differential Revision: http://reviews.llvm.org/D4120 llvm-svn: 211019
2014-06-16 21:18:59 +08:00
clo $11,$a1 # CHECK: clo $11, $5 # encoding: [0x70,0xab,0x58,0x21]
clz $sp,$gp # CHECK: clz $sp, $gp # encoding: [0x73,0x9d,0xe8,0x20]
[mips] Correct tests that are meant to test valid assembly. They were actually rejected by GAS. Summary: I've noticed a bug in my test generator script that caused 64-bit objects to be disassembled as if it were using the O32 ABI, giving the wrong register names. As a result, it generated assembly files that are rejected by GAS when assembling for the correct ABI. This was caused by the generator setting the ELF e_flags incorrectly before disassembling the object. This patch corrects the invalid tests that have already been committed by replacing the ABI-dependent register names with numeric registers. In addition to fixing the tests this allows the 32-bit and 64-bit ISA tests to be easily diffed to produce the invalid-*.s tests which test that instructions defined in later ISA's are not accepted. Depends on D3648 Reviewers: vmedic Reviewed By: vmedic Differential Revision: http://reviews.llvm.org/D3649 llvm-svn: 208327
2014-05-08 23:17:29 +08:00
ctc1 $a2,$26
cvt.d.l $f4,$f16
cvt.d.s $f22,$f28
cvt.d.w $f26,$f11
cvt.l.d $f24,$f15
cvt.l.s $f11,$f29
cvt.s.d $f26,$f8
cvt.s.l $f15,$f30
cvt.s.w $f22,$f15
cvt.w.d $f20,$f14
cvt.w.s $f20,$f24
dadd $s3,$at,$ra
[mips][mips64r6] daddi is not available on MIPS64r6 Summary: It's not emitted by the code generator so we only need assembler tests. Also added missing daddi aliases from dsub mnemonics, and removed a couple duplicate dsub tests. Depends on D4112 Reviewers: zoran.jovanovic, jkolek, vmedic Reviewed By: vmedic Differential Revision: http://reviews.llvm.org/D4113 llvm-svn: 210897
2014-06-13 20:49:06 +08:00
dadd $sp,$s4,-27705 # CHECK: daddi $sp, $20, -27705 # encoding: [0x62,0x9d,0x93,0xc7]
dadd $sp,-27705 # CHECK: daddi $sp, $sp, -27705 # encoding: [0x63,0xbd,0x93,0xc7]
[mips] Correct tests that are meant to test valid assembly. They were actually rejected by GAS. Summary: I've noticed a bug in my test generator script that caused 64-bit objects to be disassembled as if it were using the O32 ABI, giving the wrong register names. As a result, it generated assembly files that are rejected by GAS when assembling for the correct ABI. This was caused by the generator setting the ELF e_flags incorrectly before disassembling the object. This patch corrects the invalid tests that have already been committed by replacing the ABI-dependent register names with numeric registers. In addition to fixing the tests this allows the 32-bit and 64-bit ISA tests to be easily diffed to produce the invalid-*.s tests which test that instructions defined in later ISA's are not accepted. Depends on D3648 Reviewers: vmedic Reviewed By: vmedic Differential Revision: http://reviews.llvm.org/D3649 llvm-svn: 208327
2014-05-08 23:17:29 +08:00
daddi $sp,$s4,-27705
[mips][mips64r6] daddi is not available on MIPS64r6 Summary: It's not emitted by the code generator so we only need assembler tests. Also added missing daddi aliases from dsub mnemonics, and removed a couple duplicate dsub tests. Depends on D4112 Reviewers: zoran.jovanovic, jkolek, vmedic Reviewed By: vmedic Differential Revision: http://reviews.llvm.org/D4113 llvm-svn: 210897
2014-06-13 20:49:06 +08:00
daddi $sp,$s4,-27705 # CHECK: daddi $sp, $20, -27705 # encoding: [0x62,0x9d,0x93,0xc7]
daddi $sp,-27705 # CHECK: daddi $sp, $sp, -27705 # encoding: [0x63,0xbd,0x93,0xc7]
[mips] Correct tests that are meant to test valid assembly. They were actually rejected by GAS. Summary: I've noticed a bug in my test generator script that caused 64-bit objects to be disassembled as if it were using the O32 ABI, giving the wrong register names. As a result, it generated assembly files that are rejected by GAS when assembling for the correct ABI. This was caused by the generator setting the ELF e_flags incorrectly before disassembling the object. This patch corrects the invalid tests that have already been committed by replacing the ABI-dependent register names with numeric registers. In addition to fixing the tests this allows the 32-bit and 64-bit ISA tests to be easily diffed to produce the invalid-*.s tests which test that instructions defined in later ISA's are not accepted. Depends on D3648 Reviewers: vmedic Reviewed By: vmedic Differential Revision: http://reviews.llvm.org/D3649 llvm-svn: 208327
2014-05-08 23:17:29 +08:00
daddiu $k0,$s6,-4586
[mips] Added missing daddu test to the valid instruction tests. Summary: Depends on D3673 Reviewers: vmedic Reviewed By: vmedic Differential Revision: http://reviews.llvm.org/D3674 llvm-svn: 208398
2014-05-09 17:32:01 +08:00
daddu $s3,$at,$ra
[mips][mips64r6] cl[oz], and dcl[oz] are re-encoded in MIPS32r6/MIPS64r6 Summary: There is no change to the restrictions, just the result register is stored once in the encoding rather than twice. The rt field is zero in MIPS32r6/MIPS64r6. Depends on D4119 Reviewers: zoran.jovanovic, jkolek, vmedic Reviewed By: vmedic Differential Revision: http://reviews.llvm.org/D4120 llvm-svn: 211019
2014-06-16 21:18:59 +08:00
dclo $s2,$a2 # CHECK: dclo $18, $6 # encoding: [0x70,0xd2,0x90,0x25]
dclz $s0,$25 # CHECK: dclz $16, $25 # encoding: [0x73,0x30,0x80,0x24]
[mips] Correct tests that are meant to test valid assembly. They were actually rejected by GAS. Summary: I've noticed a bug in my test generator script that caused 64-bit objects to be disassembled as if it were using the O32 ABI, giving the wrong register names. As a result, it generated assembly files that are rejected by GAS when assembling for the correct ABI. This was caused by the generator setting the ELF e_flags incorrectly before disassembling the object. This patch corrects the invalid tests that have already been committed by replacing the ABI-dependent register names with numeric registers. In addition to fixing the tests this allows the 32-bit and 64-bit ISA tests to be easily diffed to produce the invalid-*.s tests which test that instructions defined in later ISA's are not accepted. Depends on D3648 Reviewers: vmedic Reviewed By: vmedic Differential Revision: http://reviews.llvm.org/D3649 llvm-svn: 208327
2014-05-08 23:17:29 +08:00
deret
di $s8
ddiv $zero,$k0,$s3
ddivu $zero,$s0,$s1
div $zero,$25,$11
div.d $f29,$f20,$f27
div.s $f4,$f5,$f15
divu $zero,$25,$15
dmfc1 $12,$f13
dmtc1 $s0,$f14
dmult $s7,$9
dmultu $a1,$a2
drotr $1,15 # CHECK: drotr $1, $1, 15 # encoding: [0x00,0x21,0x0b,0xfa]
drotr $1,$14,15 # CHECK: drotr $1, $14, 15 # encoding: [0x00,0x2e,0x0b,0xfa]
drotr32 $1,15 # CHECK: drotr32 $1, $1, 15 # encoding: [0x00,0x21,0x0b,0xfe]
drotr32 $1,$14,15 # CHECK: drotr32 $1, $14, 15 # encoding: [0x00,0x2e,0x0b,0xfe]
drotrv $1,$14,$15 # CHECK: drotrv $1, $14, $15 # encoding: [0x01,0xee,0x08,0x56]
dsbh $v1,$14
dshd $v0,$sp
dsll $zero,18 # CHECK: dsll $zero, $zero, 18 # encoding: [0x00,0x00,0x04,0xb8]
dsll $zero,$s4,18 # CHECK: dsll $zero, $20, 18 # encoding: [0x00,0x14,0x04,0xb8]
dsll $zero,$s4,$12 # CHECK: dsllv $zero, $20, $12 # encoding: [0x01,0x94,0x00,0x14]
dsll32 $zero,18 # CHECK: dsll32 $zero, $zero, 18 # encoding: [0x00,0x00,0x04,0xbc]
dsll32 $zero,$zero,18 # CHECK: dsll32 $zero, $zero, 18 # encoding: [0x00,0x00,0x04,0xbc]
dsllv $zero,$s4,$12 # CHECK: dsllv $zero, $20, $12 # encoding: [0x01,0x94,0x00,0x14]
dsra $gp,10 # CHECK: dsra $gp, $gp, 10 # encoding: [0x00,0x1c,0xe2,0xbb]
dsra $gp,$s2,10 # CHECK: dsra $gp, $18, 10 # encoding: [0x00,0x12,0xe2,0xbb]
[mips] Added missing dsra -> dsrav and sra -> srav aliases. Summary: dsll, dsrl, sll, and srl already exist. Reviewers: vmedic Reviewed By: vmedic Differential Revision: http://reviews.llvm.org/D3673 llvm-svn: 208397
2014-05-09 17:24:49 +08:00
dsra $gp,$s2,$s3 # CHECK: dsrav $gp, $18, $19 # encoding: [0x02,0x72,0xe0,0x17]
[mips] Correct tests that are meant to test valid assembly. They were actually rejected by GAS. Summary: I've noticed a bug in my test generator script that caused 64-bit objects to be disassembled as if it were using the O32 ABI, giving the wrong register names. As a result, it generated assembly files that are rejected by GAS when assembling for the correct ABI. This was caused by the generator setting the ELF e_flags incorrectly before disassembling the object. This patch corrects the invalid tests that have already been committed by replacing the ABI-dependent register names with numeric registers. In addition to fixing the tests this allows the 32-bit and 64-bit ISA tests to be easily diffed to produce the invalid-*.s tests which test that instructions defined in later ISA's are not accepted. Depends on D3648 Reviewers: vmedic Reviewed By: vmedic Differential Revision: http://reviews.llvm.org/D3649 llvm-svn: 208327
2014-05-08 23:17:29 +08:00
dsra32 $gp,10 # CHECK: dsra32 $gp, $gp, 10 # encoding: [0x00,0x1c,0xe2,0xbf]
dsra32 $gp,$s2,10 # CHECK: dsra32 $gp, $18, 10 # encoding: [0x00,0x12,0xe2,0xbf]
dsrav $gp,$s2,$s3 # CHECK: dsrav $gp, $18, $19 # encoding: [0x02,0x72,0xe0,0x17]
dsrl $s3,23 # CHECK: dsrl $19, $19, 23 # encoding: [0x00,0x13,0x9d,0xfa]
dsrl $s3,$6,23 # CHECK: dsrl $19, $6, 23 # encoding: [0x00,0x06,0x9d,0xfa]
dsrl $s3,$6,$s4 # CHECK: dsrlv $19, $6, $20 # encoding: [0x02,0x86,0x98,0x16]
dsrl32 $s3,23 # CHECK: dsrl32 $19, $19, 23 # encoding: [0x00,0x13,0x9d,0xfe]
dsrl32 $s3,$6,23 # CHECK: dsrl32 $19, $6, 23 # encoding: [0x00,0x06,0x9d,0xfe]
dsrlv $s3,$6,$s4 # CHECK: dsrlv $19, $6, $20 # encoding: [0x02,0x86,0x98,0x16]
dsub $a3,$s6,$8
dsub $a3,$s6,$8
[mips][mips64r6] daddi is not available on MIPS64r6 Summary: It's not emitted by the code generator so we only need assembler tests. Also added missing daddi aliases from dsub mnemonics, and removed a couple duplicate dsub tests. Depends on D4112 Reviewers: zoran.jovanovic, jkolek, vmedic Reviewed By: vmedic Differential Revision: http://reviews.llvm.org/D4113 llvm-svn: 210897
2014-06-13 20:49:06 +08:00
dsub $sp,$s4,-27705 # CHECK: daddi $sp, $20, 27705 # encoding: [0x62,0x9d,0x6c,0x39]
dsub $sp,-27705 # CHECK: daddi $sp, $sp, 27705 # encoding: [0x63,0xbd,0x6c,0x39]
dsubi $sp,$s4,-27705 # CHECK: daddi $sp, $20, 27705 # encoding: [0x62,0x9d,0x6c,0x39]
dsubi $sp,-27705 # CHECK: daddi $sp, $sp, 27705 # encoding: [0x63,0xbd,0x6c,0x39]
dsubu $a1,$a1,$k0
[mips] Correct tests that are meant to test valid assembly. They were actually rejected by GAS. Summary: I've noticed a bug in my test generator script that caused 64-bit objects to be disassembled as if it were using the O32 ABI, giving the wrong register names. As a result, it generated assembly files that are rejected by GAS when assembling for the correct ABI. This was caused by the generator setting the ELF e_flags incorrectly before disassembling the object. This patch corrects the invalid tests that have already been committed by replacing the ABI-dependent register names with numeric registers. In addition to fixing the tests this allows the 32-bit and 64-bit ISA tests to be easily diffed to produce the invalid-*.s tests which test that instructions defined in later ISA's are not accepted. Depends on D3648 Reviewers: vmedic Reviewed By: vmedic Differential Revision: http://reviews.llvm.org/D3649 llvm-svn: 208327
2014-05-08 23:17:29 +08:00
dsubu $a1,$a1,$k0
ehb # CHECK: ehb # encoding: [0x00,0x00,0x00,0xc0]
ei $14
eret
floor.l.d $f26,$f7
floor.l.s $f12,$f5
floor.w.d $f14,$f11
floor.w.s $f8,$f9
[mips] Implement jr.hb and jalr.hb (Jump Register and Jump and Link Register with Hazard Barrier). Summary: These instructions are available in ISAs >= mips32/mips64. For mips32r6/mips64r6, jr.hb has a new encoding format. Reviewers: dsanders Reviewed By: dsanders Differential Revision: http://reviews.llvm.org/D4019 llvm-svn: 210654
2014-06-11 23:05:56 +08:00
jr.hb $4 # CHECK: jr.hb $4 # encoding: [0x00,0x80,0x04,0x08]
jalr.hb $4 # CHECK: jalr.hb $4 # encoding: [0x00,0x80,0xfc,0x09]
jalr.hb $4, $5 # CHECK: jalr.hb $4, $5 # encoding: [0x00,0xa0,0x24,0x09]
[mips] Correct tests that are meant to test valid assembly. They were actually rejected by GAS. Summary: I've noticed a bug in my test generator script that caused 64-bit objects to be disassembled as if it were using the O32 ABI, giving the wrong register names. As a result, it generated assembly files that are rejected by GAS when assembling for the correct ABI. This was caused by the generator setting the ELF e_flags incorrectly before disassembling the object. This patch corrects the invalid tests that have already been committed by replacing the ABI-dependent register names with numeric registers. In addition to fixing the tests this allows the 32-bit and 64-bit ISA tests to be easily diffed to produce the invalid-*.s tests which test that instructions defined in later ISA's are not accepted. Depends on D3648 Reviewers: vmedic Reviewed By: vmedic Differential Revision: http://reviews.llvm.org/D3649 llvm-svn: 208327
2014-05-08 23:17:29 +08:00
lb $24,-14515($10)
lbu $8,30195($v1)
ld $sp,-28645($s1)
ldc1 $f11,16391($s0)
[mips][mips64r6] [ls][wd]c2 were re-encoded with 11-bit signed immediates rather than 16-bit in MIPS32r6/MIPS64r6 Summary: The error message for the invalid.s cases isn't very helpful. It happens because there is an instruction with a wider immediate that would have matched if the NotMips32r6 predicate were true. I have some WIP to improve the message but it affects most error messages for removed/re-encoded instructions on MIPS32r6/MIPS64r6 and should therefore be a separate commit. Depens on D4115 Reviewers: zoran.jovanovic, jkolek, vmedic Reviewed By: vmedic Differential Revision: http://reviews.llvm.org/D4117 llvm-svn: 211012
2014-06-16 18:00:45 +08:00
ldc2 $8,-21181($at) # CHECK: ldc2 $8, -21181($1) # encoding: [0xd8,0x28,0xad,0x43]
[mips] Correct tests that are meant to test valid assembly. They were actually rejected by GAS. Summary: I've noticed a bug in my test generator script that caused 64-bit objects to be disassembled as if it were using the O32 ABI, giving the wrong register names. As a result, it generated assembly files that are rejected by GAS when assembling for the correct ABI. This was caused by the generator setting the ELF e_flags incorrectly before disassembling the object. This patch corrects the invalid tests that have already been committed by replacing the ABI-dependent register names with numeric registers. In addition to fixing the tests this allows the 32-bit and 64-bit ISA tests to be easily diffed to produce the invalid-*.s tests which test that instructions defined in later ISA's are not accepted. Depends on D3648 Reviewers: vmedic Reviewed By: vmedic Differential Revision: http://reviews.llvm.org/D3649 llvm-svn: 208327
2014-05-08 23:17:29 +08:00
ldl $24,-4167($24)
ldr $14,-30358($s4)
ldxc1 $f8,$s7($15)
lh $11,-8556($s5)
lhu $s3,-22851($v0)
li $at,-29773
li $zero,-29889
[mips][mips64r6] ll, sc, lld, and scd are re-encoded on MIPS32r6/MIPS64r6. Summary: The linked-load, store-conditional operations have been re-encoded such that have a 9-bit offset instead of the 16-bit offset they have prior to MIPS32r6/MIPS64r6. While implementing this, I noticed that the atomic load/store pseudos always emit a sign extension using sll and sra. I have improved this to use seb/seh when they are available (MIPS32r2/MIPS64r2 and above). Depends on D4118 Reviewers: jkolek, zoran.jovanovic, vmedic Reviewed By: vmedic Differential Revision: http://reviews.llvm.org/D4119 llvm-svn: 211018
2014-06-16 21:13:03 +08:00
ll $v0,-7321($s2) # CHECK: ll $2, -7321($18) # encoding: [0xc2,0x42,0xe3,0x67]
lld $zero,-14736($ra) # CHECK: lld $zero, -14736($ra) # encoding: [0xd3,0xe0,0xc6,0x70]
[mips] Correct tests that are meant to test valid assembly. They were actually rejected by GAS. Summary: I've noticed a bug in my test generator script that caused 64-bit objects to be disassembled as if it were using the O32 ABI, giving the wrong register names. As a result, it generated assembly files that are rejected by GAS when assembling for the correct ABI. This was caused by the generator setting the ELF e_flags incorrectly before disassembling the object. This patch corrects the invalid tests that have already been committed by replacing the ABI-dependent register names with numeric registers. In addition to fixing the tests this allows the 32-bit and 64-bit ISA tests to be easily diffed to produce the invalid-*.s tests which test that instructions defined in later ISA's are not accepted. Depends on D3648 Reviewers: vmedic Reviewed By: vmedic Differential Revision: http://reviews.llvm.org/D3649 llvm-svn: 208327
2014-05-08 23:17:29 +08:00
luxc1 $f19,$s6($s5)
lw $8,5674($a1)
lwc1 $f16,10225($k0)
[mips][mips64r6] [ls][wd]c2 were re-encoded with 11-bit signed immediates rather than 16-bit in MIPS32r6/MIPS64r6 Summary: The error message for the invalid.s cases isn't very helpful. It happens because there is an instruction with a wider immediate that would have matched if the NotMips32r6 predicate were true. I have some WIP to improve the message but it affects most error messages for removed/re-encoded instructions on MIPS32r6/MIPS64r6 and should therefore be a separate commit. Depens on D4115 Reviewers: zoran.jovanovic, jkolek, vmedic Reviewed By: vmedic Differential Revision: http://reviews.llvm.org/D4117 llvm-svn: 211012
2014-06-16 18:00:45 +08:00
lwc2 $18,-841($a2) # CHECK: lwc2 $18, -841($6) # encoding: [0xc8,0xd2,0xfc,0xb7]
[mips] Correct tests that are meant to test valid assembly. They were actually rejected by GAS. Summary: I've noticed a bug in my test generator script that caused 64-bit objects to be disassembled as if it were using the O32 ABI, giving the wrong register names. As a result, it generated assembly files that are rejected by GAS when assembling for the correct ABI. This was caused by the generator setting the ELF e_flags incorrectly before disassembling the object. This patch corrects the invalid tests that have already been committed by replacing the ABI-dependent register names with numeric registers. In addition to fixing the tests this allows the 32-bit and 64-bit ISA tests to be easily diffed to produce the invalid-*.s tests which test that instructions defined in later ISA's are not accepted. Depends on D3648 Reviewers: vmedic Reviewed By: vmedic Differential Revision: http://reviews.llvm.org/D3649 llvm-svn: 208327
2014-05-08 23:17:29 +08:00
lwl $s4,-4231($15)
lwr $zero,-19147($gp)
lwu $s3,-24086($v1)
lwxc1 $f12,$s1($s8)
madd $s6,$13
madd $zero,$9
madd.s $f1,$f31,$f19,$f25
maddu $s3,$gp
maddu $24,$s2
mfc0 $a2,$14,1
mfc1 $a3,$f27
mfhc1 $s8,$f24
mfhi $s3
mfhi $sp
mflo $s1
mov.d $f20,$f14
mov.s $f2,$f27
move $a0,$a3
move $s5,$a0
move $s8,$a0
move $25,$a2
movf $gp,$8,$fcc7
movf.d $f6,$f11,$fcc5
movf.s $f23,$f5,$fcc6
movn $v1,$s1,$s0
movn.d $f27,$f21,$k0
movn.s $f12,$f0,$s7
movt $zero,$s4,$fcc5
movt.d $f0,$f2,$fcc0
movt.s $f30,$f2,$fcc1
movz $a1,$s6,$9
movz.d $f12,$f29,$9
movz.s $f25,$f7,$v1
msub $s7,$k1
msub.s $f12,$f19,$f10,$f16
msubu $15,$a1
mtc0 $9,$29,3
mtc1 $s8,$f9
mthc1 $zero,$f16
mthi $s1
mtlo $sp
mtlo $25
mul $s0,$s4,$at
mul.d $f20,$f20,$f16
mul.s $f30,$f10,$f2
mult $sp,$s4
mult $sp,$v0
multu $gp,$k0
multu $9,$s2
negu $2 # CHECK: negu $2, $2 # encoding: [0x00,0x02,0x10,0x23]
negu $2,$3 # CHECK: negu $2, $3 # encoding: [0x00,0x03,0x10,0x23]
neg.d $f27,$f18
neg.s $f1,$f15
nmadd.s $f0,$f5,$f25,$f12
nmsub.s $f1,$f24,$f19,$f4
nop
nor $a3,$zero,$a3
or $12,$s0,$sp
[mips] Implement alias for 'and' and 'or' instructions for all ISAs. Summary: Examples: and $2, 4 <=> andi $2, $2, 4 or $2, 4 <=> ori $2, $2, 4 Reviewers: dsanders Reviewed By: dsanders Differential Revision: http://reviews.llvm.org/D4155 llvm-svn: 211161
2014-06-18 21:30:57 +08:00
or $2, 4 # CHECK: ori $2, $2, 4 # encoding: [0x34,0x42,0x00,0x04]
[mips] Correct tests that are meant to test valid assembly. They were actually rejected by GAS. Summary: I've noticed a bug in my test generator script that caused 64-bit objects to be disassembled as if it were using the O32 ABI, giving the wrong register names. As a result, it generated assembly files that are rejected by GAS when assembling for the correct ABI. This was caused by the generator setting the ELF e_flags incorrectly before disassembling the object. This patch corrects the invalid tests that have already been committed by replacing the ABI-dependent register names with numeric registers. In addition to fixing the tests this allows the 32-bit and 64-bit ISA tests to be easily diffed to produce the invalid-*.s tests which test that instructions defined in later ISA's are not accepted. Depends on D3648 Reviewers: vmedic Reviewed By: vmedic Differential Revision: http://reviews.llvm.org/D3649 llvm-svn: 208327
2014-05-08 23:17:29 +08:00
pause # CHECK: pause # encoding: [0x00,0x00,0x01,0x40]
[mips] Add cache and pref instructions Summary: cache and pref were added in MIPS-III, and MIPS32 but were re-encoded in MIPS32r6/MIPS64r6 to use a 9-bit offset rather than the 16-bit offset available to earlier cores. Resolved the decoding conflict between pref and lwc3. Depends on D4115 Reviewers: zoran.jovanovic, jkolek, vmedic Reviewed By: vmedic Differential Revision: http://reviews.llvm.org/D4116 llvm-svn: 210900
2014-06-13 21:15:59 +08:00
pref 1, 8($5) # CHECK: pref 1, 8($5) # encoding: [0xcc,0xa1,0x00,0x08]
[mips] Correct tests that are meant to test valid assembly. They were actually rejected by GAS. Summary: I've noticed a bug in my test generator script that caused 64-bit objects to be disassembled as if it were using the O32 ABI, giving the wrong register names. As a result, it generated assembly files that are rejected by GAS when assembling for the correct ABI. This was caused by the generator setting the ELF e_flags incorrectly before disassembling the object. This patch corrects the invalid tests that have already been committed by replacing the ABI-dependent register names with numeric registers. In addition to fixing the tests this allows the 32-bit and 64-bit ISA tests to be easily diffed to produce the invalid-*.s tests which test that instructions defined in later ISA's are not accepted. Depends on D3648 Reviewers: vmedic Reviewed By: vmedic Differential Revision: http://reviews.llvm.org/D3649 llvm-svn: 208327
2014-05-08 23:17:29 +08:00
rdhwr $sp,$11
rotr $1,15 # CHECK: rotr $1, $1, 15 # encoding: [0x00,0x21,0x0b,0xc2]
rotr $1,$14,15 # CHECK: rotr $1, $14, 15 # encoding: [0x00,0x2e,0x0b,0xc2]
rotrv $1,$14,$15 # CHECK: rotrv $1, $14, $15 # encoding: [0x01,0xee,0x08,0x46]
round.l.d $f12,$f1
round.l.s $f25,$f5
round.w.d $f6,$f4
round.w.s $f27,$f28
sb $s6,-19857($14)
[mips][mips64r6] ll, sc, lld, and scd are re-encoded on MIPS32r6/MIPS64r6. Summary: The linked-load, store-conditional operations have been re-encoded such that have a 9-bit offset instead of the 16-bit offset they have prior to MIPS32r6/MIPS64r6. While implementing this, I noticed that the atomic load/store pseudos always emit a sign extension using sll and sra. I have improved this to use seb/seh when they are available (MIPS32r2/MIPS64r2 and above). Depends on D4118 Reviewers: jkolek, zoran.jovanovic, vmedic Reviewed By: vmedic Differential Revision: http://reviews.llvm.org/D4119 llvm-svn: 211018
2014-06-16 21:13:03 +08:00
sc $15,18904($s3) # CHECK: sc $15, 18904($19) # encoding: [0xe2,0x6f,0x49,0xd8]
scd $15,-8243($sp) # CHECK: scd $15, -8243($sp) # encoding: [0xf3,0xaf,0xdf,0xcd]
[mips] Correct tests that are meant to test valid assembly. They were actually rejected by GAS. Summary: I've noticed a bug in my test generator script that caused 64-bit objects to be disassembled as if it were using the O32 ABI, giving the wrong register names. As a result, it generated assembly files that are rejected by GAS when assembling for the correct ABI. This was caused by the generator setting the ELF e_flags incorrectly before disassembling the object. This patch corrects the invalid tests that have already been committed by replacing the ABI-dependent register names with numeric registers. In addition to fixing the tests this allows the 32-bit and 64-bit ISA tests to be easily diffed to produce the invalid-*.s tests which test that instructions defined in later ISA's are not accepted. Depends on D3648 Reviewers: vmedic Reviewed By: vmedic Differential Revision: http://reviews.llvm.org/D3649 llvm-svn: 208327
2014-05-08 23:17:29 +08:00
sd $12,5835($10)
sdc1 $f31,30574($13)
[mips][mips64r6] [ls][wd]c2 were re-encoded with 11-bit signed immediates rather than 16-bit in MIPS32r6/MIPS64r6 Summary: The error message for the invalid.s cases isn't very helpful. It happens because there is an instruction with a wider immediate that would have matched if the NotMips32r6 predicate were true. I have some WIP to improve the message but it affects most error messages for removed/re-encoded instructions on MIPS32r6/MIPS64r6 and should therefore be a separate commit. Depens on D4115 Reviewers: zoran.jovanovic, jkolek, vmedic Reviewed By: vmedic Differential Revision: http://reviews.llvm.org/D4117 llvm-svn: 211012
2014-06-16 18:00:45 +08:00
sdc2 $20,23157($s2) # CHECK: sdc2 $20, 23157($18) # encoding: [0xfa,0x54,0x5a,0x75]
[mips] Correct tests that are meant to test valid assembly. They were actually rejected by GAS. Summary: I've noticed a bug in my test generator script that caused 64-bit objects to be disassembled as if it were using the O32 ABI, giving the wrong register names. As a result, it generated assembly files that are rejected by GAS when assembling for the correct ABI. This was caused by the generator setting the ELF e_flags incorrectly before disassembling the object. This patch corrects the invalid tests that have already been committed by replacing the ABI-dependent register names with numeric registers. In addition to fixing the tests this allows the 32-bit and 64-bit ISA tests to be easily diffed to produce the invalid-*.s tests which test that instructions defined in later ISA's are not accepted. Depends on D3648 Reviewers: vmedic Reviewed By: vmedic Differential Revision: http://reviews.llvm.org/D3649 llvm-svn: 208327
2014-05-08 23:17:29 +08:00
sdl $a3,-20961($s8)
sdr $11,-20423($12)
sdxc1 $f11,$10($14)
seb $25,$15
seh $v1,$12
sh $14,-6704($15)
sll $a3,18 # CHECK: sll $7, $7, 18 # encoding: [0x00,0x07,0x3c,0x80]
sll $a3,$zero,18 # CHECK: sll $7, $zero, 18 # encoding: [0x00,0x00,0x3c,0x80]
sll $a3,$zero,$9 # CHECK: sllv $7, $zero, $9 # encoding: [0x01,0x20,0x38,0x04]
sllv $a3,$zero,$9 # CHECK: sllv $7, $zero, $9 # encoding: [0x01,0x20,0x38,0x04]
slt $s7,$11,$k1 # CHECK: slt $23, $11, $27 # encoding: [0x01,0x7b,0xb8,0x2a]
slti $s1,$10,9489 # CHECK: slti $17, $10, 9489 # encoding: [0x29,0x51,0x25,0x11]
sltiu $25,$25,-15531 # CHECK: sltiu $25, $25, -15531 # encoding: [0x2f,0x39,0xc3,0x55]
sltu $s4,$s5,$11 # CHECK: sltu $20, $21, $11 # encoding: [0x02,0xab,0xa0,0x2b]
sltu $24,$25,-15531 # CHECK: sltiu $24, $25, -15531 # encoding: [0x2f,0x38,0xc3,0x55]
sqrt.d $f17,$f22
sqrt.s $f0,$f1
sra $s1,15 # CHECK: sra $17, $17, 15 # encoding: [0x00,0x11,0x8b,0xc3]
sra $s1,$s7,15 # CHECK: sra $17, $23, 15 # encoding: [0x00,0x17,0x8b,0xc3]
[mips] Added missing dsra -> dsrav and sra -> srav aliases. Summary: dsll, dsrl, sll, and srl already exist. Reviewers: vmedic Reviewed By: vmedic Differential Revision: http://reviews.llvm.org/D3673 llvm-svn: 208397
2014-05-09 17:24:49 +08:00
sra $s1,$s7,$sp # CHECK: srav $17, $23, $sp # encoding: [0x03,0xb7,0x88,0x07]
[mips] Correct tests that are meant to test valid assembly. They were actually rejected by GAS. Summary: I've noticed a bug in my test generator script that caused 64-bit objects to be disassembled as if it were using the O32 ABI, giving the wrong register names. As a result, it generated assembly files that are rejected by GAS when assembling for the correct ABI. This was caused by the generator setting the ELF e_flags incorrectly before disassembling the object. This patch corrects the invalid tests that have already been committed by replacing the ABI-dependent register names with numeric registers. In addition to fixing the tests this allows the 32-bit and 64-bit ISA tests to be easily diffed to produce the invalid-*.s tests which test that instructions defined in later ISA's are not accepted. Depends on D3648 Reviewers: vmedic Reviewed By: vmedic Differential Revision: http://reviews.llvm.org/D3649 llvm-svn: 208327
2014-05-08 23:17:29 +08:00
srav $s1,$s7,$sp # CHECK: srav $17, $23, $sp # encoding: [0x03,0xb7,0x88,0x07]
srl $2,7 # CHECK: srl $2, $2, 7 # encoding: [0x00,0x02,0x11,0xc2]
srl $2,$2,7 # CHECK: srl $2, $2, 7 # encoding: [0x00,0x02,0x11,0xc2]
srl $25,$s4,$a0 # CHECK: srlv $25, $20, $4 # encoding: [0x00,0x94,0xc8,0x06]
srlv $25,$s4,$a0 # CHECK: srlv $25, $20, $4 # encoding: [0x00,0x94,0xc8,0x06]
ssnop # CHECK: ssnop # encoding: [0x00,0x00,0x00,0x40]
sub $s6,$s3,$12
sub.d $f18,$f3,$f17
sub.s $f23,$f22,$f22
subu $sp,$s6,$s6
suxc1 $f12,$k1($13)
sw $ra,-10160($sp)
swc1 $f6,-8465($24)
[mips][mips64r6] [ls][wd]c2 were re-encoded with 11-bit signed immediates rather than 16-bit in MIPS32r6/MIPS64r6 Summary: The error message for the invalid.s cases isn't very helpful. It happens because there is an instruction with a wider immediate that would have matched if the NotMips32r6 predicate were true. I have some WIP to improve the message but it affects most error messages for removed/re-encoded instructions on MIPS32r6/MIPS64r6 and should therefore be a separate commit. Depens on D4115 Reviewers: zoran.jovanovic, jkolek, vmedic Reviewed By: vmedic Differential Revision: http://reviews.llvm.org/D4117 llvm-svn: 211012
2014-06-16 18:00:45 +08:00
swc2 $25,24880($s0) # CHECK: swc2 $25, 24880($16) # encoding: [0xea,0x19,0x61,0x30]
[mips] Correct tests that are meant to test valid assembly. They were actually rejected by GAS. Summary: I've noticed a bug in my test generator script that caused 64-bit objects to be disassembled as if it were using the O32 ABI, giving the wrong register names. As a result, it generated assembly files that are rejected by GAS when assembling for the correct ABI. This was caused by the generator setting the ELF e_flags incorrectly before disassembling the object. This patch corrects the invalid tests that have already been committed by replacing the ABI-dependent register names with numeric registers. In addition to fixing the tests this allows the 32-bit and 64-bit ISA tests to be easily diffed to produce the invalid-*.s tests which test that instructions defined in later ISA's are not accepted. Depends on D3648 Reviewers: vmedic Reviewed By: vmedic Differential Revision: http://reviews.llvm.org/D3649 llvm-svn: 208327
2014-05-08 23:17:29 +08:00
swl $15,13694($s3)
swr $s1,-26590($14)
swxc1 $f19,$12($k0)
teqi $s5,-17504
tgei $s1,5025
tgeiu $sp,-28621
tlbp # CHECK: tlbp # encoding: [0x42,0x00,0x00,0x08]
tlbr # CHECK: tlbr # encoding: [0x42,0x00,0x00,0x01]
tlbwi # CHECK: tlbwi # encoding: [0x42,0x00,0x00,0x02]
tlbwr # CHECK: tlbwr # encoding: [0x42,0x00,0x00,0x06]
tlti $14,-21059
tltiu $ra,-5076
tnei $12,-29647
trunc.l.d $f23,$f23
trunc.l.s $f28,$f31
trunc.w.d $f22,$f15
trunc.w.s $f28,$f30
xor $s2,$a0,$s8
wsbh $k1,$9