maxjhandsome
/
llvm-project
forked from OSchip/llvm-project
1
0
Fork 0
Code Issues Pull Requests Packages Releases Wiki Activity
llvm-project/llvm/test/CodeGen/SystemZ/atomicrmw-and-04.ll

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

172 lines
4.4 KiB
LLVM
Raw Normal View History

[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; Test 64-bit atomic ANDs.
;
[SystemZ] Add NGRK, OGRK and XGRK Like r186683, but for 64 bits. llvm-svn: 186685
2013-07-20 00:24:22 +08:00
; RUN: llc < %s -mtriple=s390x-linux-gnu -mcpu=z10 | FileCheck %s
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; Check ANDs of a variable.
define i64 @f1(i64 %dummy, i64 *%src, i64 %b) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f1:
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK: lg %r2, 0(%r3)
; CHECK: [[LABEL:\.[^:]*]]:
; CHECK: lgr %r0, %r2
; CHECK: ngr %r0, %r4
; CHECK: csg %r2, %r0, 0(%r3)
[SystemZ] Be more careful about inverting CC masks System z branches have a mask to select which of the 4 CC values should cause the branch to be taken. We can invert a branch by inverting the mask. However, not all instructions can produce all 4 CC values, so inverting the branch like this can lead to some oddities. For example, integer comparisons only produce a CC of 0 (equal), 1 (less) or 2 (greater). If an integer EQ is reversed to NE before instruction selection, the branch will test for 1 or 2. If instead the branch is reversed after instruction selection (by inverting the mask), it will test for 1, 2 or 3. Both are correct, but the second isn't really canonical. This patch therefore keeps track of which CC values are possible and uses this when inverting a mask. Although this is mostly cosmestic, it fixes undefined behavior for the CIJNLH in branch-08.ll. Another fix would have been to mask out bit 0 when generating the fused compare and branch, but the point of this patch is that we shouldn't need to do that in the first place. The patch also makes it easier to reuse CC results from other instructions. llvm-svn: 187495
2013-07-31 20:30:20 +08:00
; CHECK: jl [[LABEL]]
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK: br %r14
%res = atomicrmw and i64 *%src, i64 %b seq_cst
ret i64 %res
}
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; Check ANDs of 1, which are done using a register. (We could use RISBG
; instead, but that isn't implemented yet.)
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
define i64 @f2(i64 %dummy, i64 *%src) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f2:
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK: ngr
; CHECK: br %r14
%res = atomicrmw and i64 *%src, i64 1 seq_cst
ret i64 %res
}
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; Check the equivalent of NIHF with 1, which can use RISBG instead.
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
define i64 @f3(i64 %dummy, i64 *%src) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f3:
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK: lg %r2, 0(%r3)
; CHECK: [[LABEL:\.[^:]*]]:
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; CHECK: risbg %r0, %r2, 31, 191, 0
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK: csg %r2, %r0, 0(%r3)
[SystemZ] Be more careful about inverting CC masks System z branches have a mask to select which of the 4 CC values should cause the branch to be taken. We can invert a branch by inverting the mask. However, not all instructions can produce all 4 CC values, so inverting the branch like this can lead to some oddities. For example, integer comparisons only produce a CC of 0 (equal), 1 (less) or 2 (greater). If an integer EQ is reversed to NE before instruction selection, the branch will test for 1 or 2. If instead the branch is reversed after instruction selection (by inverting the mask), it will test for 1, 2 or 3. Both are correct, but the second isn't really canonical. This patch therefore keeps track of which CC values are possible and uses this when inverting a mask. Although this is mostly cosmestic, it fixes undefined behavior for the CIJNLH in branch-08.ll. Another fix would have been to mask out bit 0 when generating the fused compare and branch, but the point of this patch is that we shouldn't need to do that in the first place. The patch also makes it easier to reuse CC results from other instructions. llvm-svn: 187495
2013-07-31 20:30:20 +08:00
; CHECK: jl [[LABEL]]
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK: br %r14
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
%res = atomicrmw and i64 *%src, i64 8589934591 seq_cst
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
ret i64 %res
}
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; Check the lowest NIHF value outside the range of RISBG.
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
define i64 @f4(i64 %dummy, i64 *%src) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f4:
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; CHECK: lg %r2, 0(%r3)
; CHECK: [[LABEL:\.[^:]*]]:
; CHECK: lgr %r0, %r2
; CHECK: nihf %r0, 2
; CHECK: csg %r2, %r0, 0(%r3)
[SystemZ] Be more careful about inverting CC masks System z branches have a mask to select which of the 4 CC values should cause the branch to be taken. We can invert a branch by inverting the mask. However, not all instructions can produce all 4 CC values, so inverting the branch like this can lead to some oddities. For example, integer comparisons only produce a CC of 0 (equal), 1 (less) or 2 (greater). If an integer EQ is reversed to NE before instruction selection, the branch will test for 1 or 2. If instead the branch is reversed after instruction selection (by inverting the mask), it will test for 1, 2 or 3. Both are correct, but the second isn't really canonical. This patch therefore keeps track of which CC values are possible and uses this when inverting a mask. Although this is mostly cosmestic, it fixes undefined behavior for the CIJNLH in branch-08.ll. Another fix would have been to mask out bit 0 when generating the fused compare and branch, but the point of this patch is that we shouldn't need to do that in the first place. The patch also makes it easier to reuse CC results from other instructions. llvm-svn: 187495
2013-07-31 20:30:20 +08:00
; CHECK: jl [[LABEL]]
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK: br %r14
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
%res = atomicrmw and i64 *%src, i64 12884901887 seq_cst
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
ret i64 %res
}
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; Check the next value up, which must use a register.
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
define i64 @f5(i64 %dummy, i64 *%src) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f5:
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; CHECK: ngr
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK: br %r14
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
%res = atomicrmw and i64 *%src, i64 12884901888 seq_cst
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
ret i64 %res
}
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; Check the lowest NIHH value outside the range of RISBG.
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
define i64 @f6(i64 %dummy, i64 *%src) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f6:
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; CHECK: nihh {{%r[0-5]}}, 2
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK: br %r14
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
%res = atomicrmw and i64 *%src, i64 844424930131967 seq_cst
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
ret i64 %res
}
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; Check the next value up, which must use a register.
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
define i64 @f7(i64 %dummy, i64 *%src) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f7:
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; CHECK: ngr
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK: br %r14
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
%res = atomicrmw and i64 *%src, i64 281474976710656 seq_cst
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
ret i64 %res
}
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; Check the highest NILL value outside the range of RISBG.
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
define i64 @f8(i64 %dummy, i64 *%src) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f8:
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; CHECK: nill {{%r[0-5]}}, 65530
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK: br %r14
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
%res = atomicrmw and i64 *%src, i64 -6 seq_cst
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
ret i64 %res
}
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; Check the lowest NILL value outside the range of RISBG.
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
define i64 @f9(i64 %dummy, i64 *%src) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f9:
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; CHECK: nill {{%r[0-5]}}, 2
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK: br %r14
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
%res = atomicrmw and i64 *%src, i64 -65534 seq_cst
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
ret i64 %res
}
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; Check the highest useful NILF value.
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
define i64 @f10(i64 %dummy, i64 *%src) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f10:
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; CHECK: nilf {{%r[0-5]}}, 4294901758
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK: br %r14
%res = atomicrmw and i64 *%src, i64 -65538 seq_cst
ret i64 %res
}
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; Check the highest NILH value outside the range of RISBG.
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
define i64 @f11(i64 %dummy, i64 *%src) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f11:
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; CHECK: nilh {{%r[0-5]}}, 65530
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK: br %r14
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
%res = atomicrmw and i64 *%src, i64 -327681 seq_cst
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
ret i64 %res
}
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; Check the lowest NILH value outside the range of RISBG.
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
define i64 @f12(i64 %dummy, i64 *%src) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f12:
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; CHECK: nilh {{%r[0-5]}}, 2
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK: br %r14
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
%res = atomicrmw and i64 *%src, i64 -4294770689 seq_cst
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
ret i64 %res
}
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; Check the lowest NILF value outside the range of RISBG.
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
define i64 @f13(i64 %dummy, i64 *%src) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f13:
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; CHECK: nilf {{%r[0-5]}}, 2
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK: br %r14
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
%res = atomicrmw and i64 *%src, i64 -4294967294 seq_cst
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
ret i64 %res
}
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; Check the highest NIHL value outside the range of RISBG.
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
define i64 @f14(i64 %dummy, i64 *%src) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f14:
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; CHECK: nihl {{%r[0-5]}}, 65530
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK: br %r14
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
%res = atomicrmw and i64 *%src, i64 -21474836481 seq_cst
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
ret i64 %res
}
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; Check the lowest NIHL value outside the range of RISBG.
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
define i64 @f15(i64 %dummy, i64 *%src) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f15:
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; CHECK: nihl {{%r[0-5]}}, 2
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK: br %r14
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
%res = atomicrmw and i64 *%src, i64 -281462091808769 seq_cst
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
ret i64 %res
}
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; Check the highest NIHH value outside the range of RISBG.
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
define i64 @f16(i64 %dummy, i64 *%src) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f16:
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; CHECK: nihh {{%r[0-5]}}, 65530
; CHECK: br %r14
%res = atomicrmw and i64 *%src, i64 -1407374883553281 seq_cst
ret i64 %res
}
; Check the highest useful NIHF value.
define i64 @f17(i64 %dummy, i64 *%src) {
; CHECK-LABEL: f17:
; CHECK: nihf {{%r[0-5]}}, 4294901758
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK: br %r14
%res = atomicrmw and i64 *%src, i64 -281479271677953 seq_cst
ret i64 %res
}