[globalisel][combiner] Make the CombinerChangeObserver a MachineFunction::Delegate
Summary:
This allows us to register it with the MachineFunction delegate and be
notified automatically about erasure and creation of instructions. However,
we still need explicit notification for modifications such as those caused
by setReg() or replaceRegWith().
There is a catch with this though. The notification for creation is
delivered before any operands can be added. While appropriate for
scheduling combiner work. This is unfortunate for debug output since an
opcode by itself doesn't provide sufficient information on what happened.
As a result, the work list remembers the instructions (when debug output is
requested) and emits a more complete dump later.
Another nit is that the MachineFunction::Delegate provides const pointers
which is inconvenient since we want to use it to schedule future
modification. To resolve this GISelWorkList now has an optional pointer to
the MachineFunction which describes the scope of the work it is permitted
to schedule. If a given MachineInstr* is in this function then it is
permitted to schedule work to be performed on the MachineInstr's. An
alternative to this would be to remove the const from the
MachineFunction::Delegate interface, however delegates are not permitted
to modify the MachineInstr's they receive.
In addition to this, the observer has three interface changes.
* erasedInstr() is now erasingInstr() to indicate it is about to be erased
but still exists at the moment.
* changingInstr() and changedInstr() have been added to report changes
before and after they are made. This allows us to trace the changes
in the debug output.
* As a convenience changingAllUsesOfReg() and
finishedChangingAllUsesOfReg() will report changingInstr() and
changedInstr() for each use of a given register. This is primarily useful
for changes caused by MachineRegisterInfo::replaceRegWith()
With this in place, both combine rules have been updated to report their
changes to the observer.
Finally, make some cosmetic changes to the debug output and make Combiner
and CombinerHelp
Reviewers: aditya_nandakumar, bogner, volkan, rtereshin, javed.absar
Reviewed By: aditya_nandakumar
Subscribers: mgorny, rovka, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D52947
llvm-svn: 349167
2018-12-15 01:50:14 +08:00
|
|
|
//===-- lib/CodeGen/GlobalISel/GISelChangeObserver.cpp --------------------===//
|
|
|
|
//
|
2019-01-19 16:50:56 +08:00
|
|
|
// Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions.
|
|
|
|
// See https://llvm.org/LICENSE.txt for license information.
|
|
|
|
// SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception
|
[globalisel][combiner] Make the CombinerChangeObserver a MachineFunction::Delegate
Summary:
This allows us to register it with the MachineFunction delegate and be
notified automatically about erasure and creation of instructions. However,
we still need explicit notification for modifications such as those caused
by setReg() or replaceRegWith().
There is a catch with this though. The notification for creation is
delivered before any operands can be added. While appropriate for
scheduling combiner work. This is unfortunate for debug output since an
opcode by itself doesn't provide sufficient information on what happened.
As a result, the work list remembers the instructions (when debug output is
requested) and emits a more complete dump later.
Another nit is that the MachineFunction::Delegate provides const pointers
which is inconvenient since we want to use it to schedule future
modification. To resolve this GISelWorkList now has an optional pointer to
the MachineFunction which describes the scope of the work it is permitted
to schedule. If a given MachineInstr* is in this function then it is
permitted to schedule work to be performed on the MachineInstr's. An
alternative to this would be to remove the const from the
MachineFunction::Delegate interface, however delegates are not permitted
to modify the MachineInstr's they receive.
In addition to this, the observer has three interface changes.
* erasedInstr() is now erasingInstr() to indicate it is about to be erased
but still exists at the moment.
* changingInstr() and changedInstr() have been added to report changes
before and after they are made. This allows us to trace the changes
in the debug output.
* As a convenience changingAllUsesOfReg() and
finishedChangingAllUsesOfReg() will report changingInstr() and
changedInstr() for each use of a given register. This is primarily useful
for changes caused by MachineRegisterInfo::replaceRegWith()
With this in place, both combine rules have been updated to report their
changes to the observer.
Finally, make some cosmetic changes to the debug output and make Combiner
and CombinerHelp
Reviewers: aditya_nandakumar, bogner, volkan, rtereshin, javed.absar
Reviewed By: aditya_nandakumar
Subscribers: mgorny, rovka, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D52947
llvm-svn: 349167
2018-12-15 01:50:14 +08:00
|
|
|
//
|
|
|
|
//===----------------------------------------------------------------------===//
|
|
|
|
//
|
|
|
|
// This file constains common code to combine machine functions at generic
|
|
|
|
// level.
|
|
|
|
//===----------------------------------------------------------------------===//
|
|
|
|
|
|
|
|
#include "llvm/CodeGen/GlobalISel/GISelChangeObserver.h"
|
|
|
|
#include "llvm/CodeGen/MachineRegisterInfo.h"
|
|
|
|
|
|
|
|
using namespace llvm;
|
|
|
|
|
|
|
|
void GISelChangeObserver::changingAllUsesOfReg(
|
2020-08-20 00:10:32 +08:00
|
|
|
const MachineRegisterInfo &MRI, Register Reg) {
|
[globalisel][combiner] Make the CombinerChangeObserver a MachineFunction::Delegate
Summary:
This allows us to register it with the MachineFunction delegate and be
notified automatically about erasure and creation of instructions. However,
we still need explicit notification for modifications such as those caused
by setReg() or replaceRegWith().
There is a catch with this though. The notification for creation is
delivered before any operands can be added. While appropriate for
scheduling combiner work. This is unfortunate for debug output since an
opcode by itself doesn't provide sufficient information on what happened.
As a result, the work list remembers the instructions (when debug output is
requested) and emits a more complete dump later.
Another nit is that the MachineFunction::Delegate provides const pointers
which is inconvenient since we want to use it to schedule future
modification. To resolve this GISelWorkList now has an optional pointer to
the MachineFunction which describes the scope of the work it is permitted
to schedule. If a given MachineInstr* is in this function then it is
permitted to schedule work to be performed on the MachineInstr's. An
alternative to this would be to remove the const from the
MachineFunction::Delegate interface, however delegates are not permitted
to modify the MachineInstr's they receive.
In addition to this, the observer has three interface changes.
* erasedInstr() is now erasingInstr() to indicate it is about to be erased
but still exists at the moment.
* changingInstr() and changedInstr() have been added to report changes
before and after they are made. This allows us to trace the changes
in the debug output.
* As a convenience changingAllUsesOfReg() and
finishedChangingAllUsesOfReg() will report changingInstr() and
changedInstr() for each use of a given register. This is primarily useful
for changes caused by MachineRegisterInfo::replaceRegWith()
With this in place, both combine rules have been updated to report their
changes to the observer.
Finally, make some cosmetic changes to the debug output and make Combiner
and CombinerHelp
Reviewers: aditya_nandakumar, bogner, volkan, rtereshin, javed.absar
Reviewed By: aditya_nandakumar
Subscribers: mgorny, rovka, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D52947
llvm-svn: 349167
2018-12-15 01:50:14 +08:00
|
|
|
for (auto &ChangingMI : MRI.use_instructions(Reg)) {
|
|
|
|
changingInstr(ChangingMI);
|
|
|
|
ChangingAllUsesOfReg.insert(&ChangingMI);
|
|
|
|
}
|
|
|
|
}
|
|
|
|
|
|
|
|
void GISelChangeObserver::finishedChangingAllUsesOfReg() {
|
|
|
|
for (auto *ChangedMI : ChangingAllUsesOfReg)
|
|
|
|
changedInstr(*ChangedMI);
|
2019-04-13 08:33:25 +08:00
|
|
|
ChangingAllUsesOfReg.clear();
|
[globalisel][combiner] Make the CombinerChangeObserver a MachineFunction::Delegate
Summary:
This allows us to register it with the MachineFunction delegate and be
notified automatically about erasure and creation of instructions. However,
we still need explicit notification for modifications such as those caused
by setReg() or replaceRegWith().
There is a catch with this though. The notification for creation is
delivered before any operands can be added. While appropriate for
scheduling combiner work. This is unfortunate for debug output since an
opcode by itself doesn't provide sufficient information on what happened.
As a result, the work list remembers the instructions (when debug output is
requested) and emits a more complete dump later.
Another nit is that the MachineFunction::Delegate provides const pointers
which is inconvenient since we want to use it to schedule future
modification. To resolve this GISelWorkList now has an optional pointer to
the MachineFunction which describes the scope of the work it is permitted
to schedule. If a given MachineInstr* is in this function then it is
permitted to schedule work to be performed on the MachineInstr's. An
alternative to this would be to remove the const from the
MachineFunction::Delegate interface, however delegates are not permitted
to modify the MachineInstr's they receive.
In addition to this, the observer has three interface changes.
* erasedInstr() is now erasingInstr() to indicate it is about to be erased
but still exists at the moment.
* changingInstr() and changedInstr() have been added to report changes
before and after they are made. This allows us to trace the changes
in the debug output.
* As a convenience changingAllUsesOfReg() and
finishedChangingAllUsesOfReg() will report changingInstr() and
changedInstr() for each use of a given register. This is primarily useful
for changes caused by MachineRegisterInfo::replaceRegWith()
With this in place, both combine rules have been updated to report their
changes to the observer.
Finally, make some cosmetic changes to the debug output and make Combiner
and CombinerHelp
Reviewers: aditya_nandakumar, bogner, volkan, rtereshin, javed.absar
Reviewed By: aditya_nandakumar
Subscribers: mgorny, rovka, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D52947
llvm-svn: 349167
2018-12-15 01:50:14 +08:00
|
|
|
}
|
|
|
|
|
2019-01-16 08:40:37 +08:00
|
|
|
RAIIDelegateInstaller::RAIIDelegateInstaller(MachineFunction &MF,
|
|
|
|
MachineFunction::Delegate *Del)
|
|
|
|
: MF(MF), Delegate(Del) {
|
|
|
|
// Register this as the delegate for handling insertions and deletions of
|
|
|
|
// instructions.
|
|
|
|
MF.setDelegate(Del);
|
|
|
|
}
|
|
|
|
|
|
|
|
RAIIDelegateInstaller::~RAIIDelegateInstaller() { MF.resetDelegate(Delegate); }
|
2020-02-19 06:42:49 +08:00
|
|
|
|
|
|
|
RAIIMFObserverInstaller::RAIIMFObserverInstaller(MachineFunction &MF,
|
|
|
|
GISelChangeObserver &Observer)
|
|
|
|
: MF(MF) {
|
|
|
|
MF.setObserver(&Observer);
|
|
|
|
}
|
|
|
|
|
|
|
|
RAIIMFObserverInstaller::~RAIIMFObserverInstaller() { MF.setObserver(nullptr); }
|