maxjhandsome
/
llvm-project
forked from OSchip/llvm-project
1
0
Fork 0
Code Issues Pull Requests Packages Releases Wiki Activity
llvm-project/llvm/test/CodeGen/SystemZ/atomicrmw-minmax-02.ll

225 lines
6.6 KiB
LLVM
Raw Normal View History

[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; Test 8-bit atomic min/max operations.
;
; RUN: llc < %s -mtriple=s390x-linux-gnu | FileCheck %s -check-prefix=CHECK
; RUN: llc < %s -mtriple=s390x-linux-gnu | FileCheck %s -check-prefix=CHECK-SHIFT1
; RUN: llc < %s -mtriple=s390x-linux-gnu | FileCheck %s -check-prefix=CHECK-SHIFT2
; Check signed minimum.
; - CHECK is for the main loop.
; - CHECK-SHIFT1 makes sure that the negated shift count used by the second
; RLL is set up correctly. The negation is independent of the NILL and L
; tested in CHECK.
; - CHECK-SHIFT2 makes sure that %b is shifted into the high part of the word
; before being used, and that the low bits are set to 1. This sequence is
; independent of the other loop prologue instructions.
define i16 @f1(i16 *%src, i16 %b) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f1:
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; CHECK: sllg [[SHIFT:%r[1-9]+]], %r2, 3
; CHECK: nill %r2, 65532
; CHECK: l [[OLD:%r[0-9]+]], 0(%r2)
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK: [[LOOP:\.[^:]*]]:
; CHECK: rll [[ROT:%r[0-9]+]], [[OLD]], 0([[SHIFT]])
[SystemZ] Register compare-and-branch support This patch adds support for the CRJ and CGRJ instructions. Support for the immediate forms will be a separate patch. The architecture has a large number of comparison instructions. I think it's generally better to concentrate on using the "best" comparison instruction first and foremost, then only use something like CRJ if CR really was the natual choice of comparison instruction. The patch therefore opportunistically converts separate CR and BRC instructions into a single CRJ while emitting instructions in ISelLowering. llvm-svn: 182764
2013-05-28 18:41:11 +08:00
; CHECK: crjle [[ROT]], %r3, [[KEEP:\..*]]
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK: risbg [[ROT]], %r3, 32, 47, 0
; CHECK: [[KEEP]]:
; CHECK: rll [[NEW:%r[0-9]+]], [[ROT]], 0({{%r[1-9]+}})
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; CHECK: cs [[OLD]], [[NEW]], 0(%r2)
[SystemZ] Be more careful about inverting CC masks System z branches have a mask to select which of the 4 CC values should cause the branch to be taken. We can invert a branch by inverting the mask. However, not all instructions can produce all 4 CC values, so inverting the branch like this can lead to some oddities. For example, integer comparisons only produce a CC of 0 (equal), 1 (less) or 2 (greater). If an integer EQ is reversed to NE before instruction selection, the branch will test for 1 or 2. If instead the branch is reversed after instruction selection (by inverting the mask), it will test for 1, 2 or 3. Both are correct, but the second isn't really canonical. This patch therefore keeps track of which CC values are possible and uses this when inverting a mask. Although this is mostly cosmestic, it fixes undefined behavior for the CIJNLH in branch-08.ll. Another fix would have been to mask out bit 0 when generating the fused compare and branch, but the point of this patch is that we shouldn't need to do that in the first place. The patch also makes it easier to reuse CC results from other instructions. llvm-svn: 187495
2013-07-31 20:30:20 +08:00
; CHECK: jl [[LOOP]]
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK: rll %r2, [[OLD]], 16([[SHIFT]])
; CHECK: br %r14
;
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-SHIFT1-LABEL: f1:
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK-SHIFT1: sllg [[SHIFT:%r[1-9]+]], %r2, 3
; CHECK-SHIFT1: lcr [[NEGSHIFT:%r[1-9]+]], [[SHIFT]]
; CHECK-SHIFT1: rll
; CHECK-SHIFT1: rll {{%r[0-9]+}}, {{%r[0-9]+}}, 0([[NEGSHIFT]])
; CHECK-SHIFT1: rll
; CHECK-SHIFT1: br %r14
;
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-SHIFT2-LABEL: f1:
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK-SHIFT2: sll %r3, 16
; CHECK-SHIFT2: rll
[SystemZ] Register compare-and-branch support This patch adds support for the CRJ and CGRJ instructions. Support for the immediate forms will be a separate patch. The architecture has a large number of comparison instructions. I think it's generally better to concentrate on using the "best" comparison instruction first and foremost, then only use something like CRJ if CR really was the natual choice of comparison instruction. The patch therefore opportunistically converts separate CR and BRC instructions into a single CRJ while emitting instructions in ISelLowering. llvm-svn: 182764
2013-05-28 18:41:11 +08:00
; CHECK-SHIFT2: crjle {{%r[0-9]+}}, %r3
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK-SHIFT2: rll
; CHECK-SHIFT2: rll
; CHECK-SHIFT2: br %r14
%res = atomicrmw min i16 *%src, i16 %b seq_cst
ret i16 %res
}
; Check signed maximum.
define i16 @f2(i16 *%src, i16 %b) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f2:
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; CHECK: sllg [[SHIFT:%r[1-9]+]], %r2, 3
; CHECK: nill %r2, 65532
; CHECK: l [[OLD:%r[0-9]+]], 0(%r2)
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK: [[LOOP:\.[^:]*]]:
; CHECK: rll [[ROT:%r[0-9]+]], [[OLD]], 0([[SHIFT]])
[SystemZ] Register compare-and-branch support This patch adds support for the CRJ and CGRJ instructions. Support for the immediate forms will be a separate patch. The architecture has a large number of comparison instructions. I think it's generally better to concentrate on using the "best" comparison instruction first and foremost, then only use something like CRJ if CR really was the natual choice of comparison instruction. The patch therefore opportunistically converts separate CR and BRC instructions into a single CRJ while emitting instructions in ISelLowering. llvm-svn: 182764
2013-05-28 18:41:11 +08:00
; CHECK: crjhe [[ROT]], %r3, [[KEEP:\..*]]
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK: risbg [[ROT]], %r3, 32, 47, 0
; CHECK: [[KEEP]]:
; CHECK: rll [[NEW:%r[0-9]+]], [[ROT]], 0({{%r[1-9]+}})
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; CHECK: cs [[OLD]], [[NEW]], 0(%r2)
[SystemZ] Be more careful about inverting CC masks System z branches have a mask to select which of the 4 CC values should cause the branch to be taken. We can invert a branch by inverting the mask. However, not all instructions can produce all 4 CC values, so inverting the branch like this can lead to some oddities. For example, integer comparisons only produce a CC of 0 (equal), 1 (less) or 2 (greater). If an integer EQ is reversed to NE before instruction selection, the branch will test for 1 or 2. If instead the branch is reversed after instruction selection (by inverting the mask), it will test for 1, 2 or 3. Both are correct, but the second isn't really canonical. This patch therefore keeps track of which CC values are possible and uses this when inverting a mask. Although this is mostly cosmestic, it fixes undefined behavior for the CIJNLH in branch-08.ll. Another fix would have been to mask out bit 0 when generating the fused compare and branch, but the point of this patch is that we shouldn't need to do that in the first place. The patch also makes it easier to reuse CC results from other instructions. llvm-svn: 187495
2013-07-31 20:30:20 +08:00
; CHECK: jl [[LOOP]]
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK: rll %r2, [[OLD]], 16([[SHIFT]])
; CHECK: br %r14
;
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-SHIFT1-LABEL: f2:
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK-SHIFT1: sllg [[SHIFT:%r[1-9]+]], %r2, 3
; CHECK-SHIFT1: lcr [[NEGSHIFT:%r[1-9]+]], [[SHIFT]]
; CHECK-SHIFT1: rll
; CHECK-SHIFT1: rll {{%r[0-9]+}}, {{%r[0-9]+}}, 0([[NEGSHIFT]])
; CHECK-SHIFT1: rll
; CHECK-SHIFT1: br %r14
;
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-SHIFT2-LABEL: f2:
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK-SHIFT2: sll %r3, 16
; CHECK-SHIFT2: rll
[SystemZ] Register compare-and-branch support This patch adds support for the CRJ and CGRJ instructions. Support for the immediate forms will be a separate patch. The architecture has a large number of comparison instructions. I think it's generally better to concentrate on using the "best" comparison instruction first and foremost, then only use something like CRJ if CR really was the natual choice of comparison instruction. The patch therefore opportunistically converts separate CR and BRC instructions into a single CRJ while emitting instructions in ISelLowering. llvm-svn: 182764
2013-05-28 18:41:11 +08:00
; CHECK-SHIFT2: crjhe {{%r[0-9]+}}, %r3
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK-SHIFT2: rll
; CHECK-SHIFT2: rll
; CHECK-SHIFT2: br %r14
%res = atomicrmw max i16 *%src, i16 %b seq_cst
ret i16 %res
}
; Check unsigned minimum.
define i16 @f3(i16 *%src, i16 %b) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f3:
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; CHECK: sllg [[SHIFT:%r[1-9]+]], %r2, 3
; CHECK: nill %r2, 65532
; CHECK: l [[OLD:%r[0-9]+]], 0(%r2)
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK: [[LOOP:\.[^:]*]]:
; CHECK: rll [[ROT:%r[0-9]+]], [[OLD]], 0([[SHIFT]])
[SystemZ] Add unsigned compare-and-branch instructions For some reason I never got around to adding these at the same time as the signed versions. No idea why. I'm not sure whether this SystemZII::BranchC* stuff is useful, or whether it should just be replaced with an "is normal" flag. I'll leave that for later though. There are some boundary conditions that can be tweaked, such as preferring unsigned comparisons for equality with [128, 256), and "<= 255" over "< 256", but again I'll leave those for a separate patch. llvm-svn: 190930
2013-09-18 17:56:40 +08:00
; CHECK: clrjle [[ROT]], %r3, [[KEEP:\..*]]
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK: risbg [[ROT]], %r3, 32, 47, 0
; CHECK: [[KEEP]]:
; CHECK: rll [[NEW:%r[0-9]+]], [[ROT]], 0({{%r[1-9]+}})
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; CHECK: cs [[OLD]], [[NEW]], 0(%r2)
[SystemZ] Be more careful about inverting CC masks System z branches have a mask to select which of the 4 CC values should cause the branch to be taken. We can invert a branch by inverting the mask. However, not all instructions can produce all 4 CC values, so inverting the branch like this can lead to some oddities. For example, integer comparisons only produce a CC of 0 (equal), 1 (less) or 2 (greater). If an integer EQ is reversed to NE before instruction selection, the branch will test for 1 or 2. If instead the branch is reversed after instruction selection (by inverting the mask), it will test for 1, 2 or 3. Both are correct, but the second isn't really canonical. This patch therefore keeps track of which CC values are possible and uses this when inverting a mask. Although this is mostly cosmestic, it fixes undefined behavior for the CIJNLH in branch-08.ll. Another fix would have been to mask out bit 0 when generating the fused compare and branch, but the point of this patch is that we shouldn't need to do that in the first place. The patch also makes it easier to reuse CC results from other instructions. llvm-svn: 187495
2013-07-31 20:30:20 +08:00
; CHECK: jl [[LOOP]]
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK: rll %r2, [[OLD]], 16([[SHIFT]])
; CHECK: br %r14
;
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-SHIFT1-LABEL: f3:
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK-SHIFT1: sllg [[SHIFT:%r[1-9]+]], %r2, 3
; CHECK-SHIFT1: lcr [[NEGSHIFT:%r[1-9]+]], [[SHIFT]]
; CHECK-SHIFT1: rll
; CHECK-SHIFT1: rll {{%r[0-9]+}}, {{%r[0-9]+}}, 0([[NEGSHIFT]])
; CHECK-SHIFT1: rll
; CHECK-SHIFT1: br %r14
;
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-SHIFT2-LABEL: f3:
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK-SHIFT2: sll %r3, 16
; CHECK-SHIFT2: rll
[SystemZ] Add unsigned compare-and-branch instructions For some reason I never got around to adding these at the same time as the signed versions. No idea why. I'm not sure whether this SystemZII::BranchC* stuff is useful, or whether it should just be replaced with an "is normal" flag. I'll leave that for later though. There are some boundary conditions that can be tweaked, such as preferring unsigned comparisons for equality with [128, 256), and "<= 255" over "< 256", but again I'll leave those for a separate patch. llvm-svn: 190930
2013-09-18 17:56:40 +08:00
; CHECK-SHIFT2: clrjle {{%r[0-9]+}}, %r3,
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK-SHIFT2: rll
; CHECK-SHIFT2: rll
; CHECK-SHIFT2: br %r14
%res = atomicrmw umin i16 *%src, i16 %b seq_cst
ret i16 %res
}
; Check unsigned maximum.
define i16 @f4(i16 *%src, i16 %b) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f4:
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; CHECK: sllg [[SHIFT:%r[1-9]+]], %r2, 3
; CHECK: nill %r2, 65532
; CHECK: l [[OLD:%r[0-9]+]], 0(%r2)
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK: [[LOOP:\.[^:]*]]:
; CHECK: rll [[ROT:%r[0-9]+]], [[OLD]], 0([[SHIFT]])
[SystemZ] Add unsigned compare-and-branch instructions For some reason I never got around to adding these at the same time as the signed versions. No idea why. I'm not sure whether this SystemZII::BranchC* stuff is useful, or whether it should just be replaced with an "is normal" flag. I'll leave that for later though. There are some boundary conditions that can be tweaked, such as preferring unsigned comparisons for equality with [128, 256), and "<= 255" over "< 256", but again I'll leave those for a separate patch. llvm-svn: 190930
2013-09-18 17:56:40 +08:00
; CHECK: clrjhe [[ROT]], %r3, [[KEEP:\..*]]
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK: risbg [[ROT]], %r3, 32, 47, 0
; CHECK: [[KEEP]]:
; CHECK: rll [[NEW:%r[0-9]+]], [[ROT]], 0({{%r[1-9]+}})
[SystemZ] Postpone NI->RISBG conversion to convertToThreeAddress() r186399 aggressively used the RISBG instruction for immediate ANDs, both because it can handle some values that AND IMMEDIATE can't, and because it allows the destination register to be different from the source. I realized later while implementing the distinct-ops support that it would be better to leave the choice up to convertToThreeAddress() instead. The AND IMMEDIATE form is shorter and is less likely to be cracked. This is a problem for 32-bit ANDs because we assume that all 32-bit operations will leave the high word untouched, whereas RISBG used in this way will either clear the high word or copy it from the source register. The patch uses the z196 instruction RISBLG for this instead. This means that z10 will be restricted to NILL, NILH and NILF for 32-bit ANDs, but I think that should be OK for now. Although we're using z10 as the base architecture, the optimization work is going to be focused more on z196 and zEC12. llvm-svn: 187492
2013-07-31 19:36:35 +08:00
; CHECK: cs [[OLD]], [[NEW]], 0(%r2)
[SystemZ] Be more careful about inverting CC masks System z branches have a mask to select which of the 4 CC values should cause the branch to be taken. We can invert a branch by inverting the mask. However, not all instructions can produce all 4 CC values, so inverting the branch like this can lead to some oddities. For example, integer comparisons only produce a CC of 0 (equal), 1 (less) or 2 (greater). If an integer EQ is reversed to NE before instruction selection, the branch will test for 1 or 2. If instead the branch is reversed after instruction selection (by inverting the mask), it will test for 1, 2 or 3. Both are correct, but the second isn't really canonical. This patch therefore keeps track of which CC values are possible and uses this when inverting a mask. Although this is mostly cosmestic, it fixes undefined behavior for the CIJNLH in branch-08.ll. Another fix would have been to mask out bit 0 when generating the fused compare and branch, but the point of this patch is that we shouldn't need to do that in the first place. The patch also makes it easier to reuse CC results from other instructions. llvm-svn: 187495
2013-07-31 20:30:20 +08:00
; CHECK: jl [[LOOP]]
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK: rll %r2, [[OLD]], 16([[SHIFT]])
; CHECK: br %r14
;
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-SHIFT1-LABEL: f4:
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK-SHIFT1: sllg [[SHIFT:%r[1-9]+]], %r2, 3
; CHECK-SHIFT1: lcr [[NEGSHIFT:%r[1-9]+]], [[SHIFT]]
; CHECK-SHIFT1: rll
; CHECK-SHIFT1: rll {{%r[0-9]+}}, {{%r[0-9]+}}, 0([[NEGSHIFT]])
; CHECK-SHIFT1: rll
; CHECK-SHIFT1: br %r14
;
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-SHIFT2-LABEL: f4:
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK-SHIFT2: sll %r3, 16
; CHECK-SHIFT2: rll
[SystemZ] Add unsigned compare-and-branch instructions For some reason I never got around to adding these at the same time as the signed versions. No idea why. I'm not sure whether this SystemZII::BranchC* stuff is useful, or whether it should just be replaced with an "is normal" flag. I'll leave that for later though. There are some boundary conditions that can be tweaked, such as preferring unsigned comparisons for equality with [128, 256), and "<= 255" over "< 256", but again I'll leave those for a separate patch. llvm-svn: 190930
2013-09-18 17:56:40 +08:00
; CHECK-SHIFT2: clrjhe {{%r[0-9]+}}, %r3,
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK-SHIFT2: rll
; CHECK-SHIFT2: rll
; CHECK-SHIFT2: br %r14
%res = atomicrmw umax i16 *%src, i16 %b seq_cst
ret i16 %res
}
; Check the lowest useful signed minimum value. We need to load 0x80010000
; into the source register.
define i16 @f5(i16 *%src) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f5:
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK: llilh [[SRC2:%r[0-9]+]], 32769
[SystemZ] Register compare-and-branch support This patch adds support for the CRJ and CGRJ instructions. Support for the immediate forms will be a separate patch. The architecture has a large number of comparison instructions. I think it's generally better to concentrate on using the "best" comparison instruction first and foremost, then only use something like CRJ if CR really was the natual choice of comparison instruction. The patch therefore opportunistically converts separate CR and BRC instructions into a single CRJ while emitting instructions in ISelLowering. llvm-svn: 182764
2013-05-28 18:41:11 +08:00
; CHECK: crjle [[ROT:%r[0-9]+]], [[SRC2]]
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK: risbg [[ROT]], [[SRC2]], 32, 47, 0
; CHECK: br %r14
;
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-SHIFT1-LABEL: f5:
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK-SHIFT1: br %r14
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-SHIFT2-LABEL: f5:
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK-SHIFT2: br %r14
%res = atomicrmw min i16 *%src, i16 -32767 seq_cst
ret i16 %res
}
; Check the highest useful signed maximum value. We need to load 0x7ffe0000
; into the source register.
define i16 @f6(i16 *%src) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f6:
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK: llilh [[SRC2:%r[0-9]+]], 32766
[SystemZ] Register compare-and-branch support This patch adds support for the CRJ and CGRJ instructions. Support for the immediate forms will be a separate patch. The architecture has a large number of comparison instructions. I think it's generally better to concentrate on using the "best" comparison instruction first and foremost, then only use something like CRJ if CR really was the natual choice of comparison instruction. The patch therefore opportunistically converts separate CR and BRC instructions into a single CRJ while emitting instructions in ISelLowering. llvm-svn: 182764
2013-05-28 18:41:11 +08:00
; CHECK: crjhe [[ROT:%r[0-9]+]], [[SRC2]]
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK: risbg [[ROT]], [[SRC2]], 32, 47, 0
; CHECK: br %r14
;
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-SHIFT1-LABEL: f6:
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK-SHIFT1: br %r14
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-SHIFT2-LABEL: f6:
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK-SHIFT2: br %r14
%res = atomicrmw max i16 *%src, i16 32766 seq_cst
ret i16 %res
}
; Check the lowest useful unsigned maximum value. We need to load 0x00010000
; into the source register.
define i16 @f7(i16 *%src) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f7:
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK: llilh [[SRC2:%r[0-9]+]], 1
[SystemZ] Add unsigned compare-and-branch instructions For some reason I never got around to adding these at the same time as the signed versions. No idea why. I'm not sure whether this SystemZII::BranchC* stuff is useful, or whether it should just be replaced with an "is normal" flag. I'll leave that for later though. There are some boundary conditions that can be tweaked, such as preferring unsigned comparisons for equality with [128, 256), and "<= 255" over "< 256", but again I'll leave those for a separate patch. llvm-svn: 190930
2013-09-18 17:56:40 +08:00
; CHECK: clrjle [[ROT:%r[0-9]+]], [[SRC2]],
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK: risbg [[ROT]], [[SRC2]], 32, 47, 0
; CHECK: br %r14
;
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-SHIFT1-LABEL: f7:
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK-SHIFT1: br %r14
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-SHIFT2-LABEL: f7:
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK-SHIFT2: br %r14
%res = atomicrmw umin i16 *%src, i16 1 seq_cst
ret i16 %res
}
; Check the highest useful unsigned maximum value. We need to load 0xfffe0000
; into the source register.
define i16 @f8(i16 *%src) {
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-LABEL: f8:
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK: llilh [[SRC2:%r[0-9]+]], 65534
[SystemZ] Add unsigned compare-and-branch instructions For some reason I never got around to adding these at the same time as the signed versions. No idea why. I'm not sure whether this SystemZII::BranchC* stuff is useful, or whether it should just be replaced with an "is normal" flag. I'll leave that for later though. There are some boundary conditions that can be tweaked, such as preferring unsigned comparisons for equality with [128, 256), and "<= 255" over "< 256", but again I'll leave those for a separate patch. llvm-svn: 190930
2013-09-18 17:56:40 +08:00
; CHECK: clrjhe [[ROT:%r[0-9]+]], [[SRC2]],
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK: risbg [[ROT]], [[SRC2]], 32, 47, 0
; CHECK: br %r14
;
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-SHIFT1-LABEL: f8:
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK-SHIFT1: br %r14
Mass update to CodeGen tests to use CHECK-LABEL for labels corresponding to function definitions for more informative error messages. No functionality change and all updated tests passed locally. This update was done with the following bash script: find test/CodeGen -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc.*debug" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_-]*\):\( *\)$FUNC: *\$/;\1\2-LABEL:\3$FUNC:/g" $TEMP done sed -i '' "s/;\(.*\)-LABEL-LABEL:/;\1-LABEL:/" $TEMP sed -i '' "s/;\(.*\)-NEXT-LABEL:/;\1-NEXT:/" $TEMP sed -i '' "s/;\(.*\)-NOT-LABEL:/;\1-NOT:/" $TEMP sed -i '' "s/;\(.*\)-DAG-LABEL:/;\1-DAG:/" $TEMP mv $TEMP $NAME fi done llvm-svn: 186280
2013-07-14 14:24:09 +08:00
; CHECK-SHIFT2-LABEL: f8:
[SystemZ] Add CodeGen test cases This adds all CodeGen tests for the SystemZ target. This version of the patch incorporates feedback from a review by Sean Silva. Thanks to all reviewers! Patch by Richard Sandiford. llvm-svn: 181204
2013-05-07 00:17:29 +08:00
; CHECK-SHIFT2: br %r14
%res = atomicrmw umax i16 *%src, i16 65534 seq_cst
ret i16 %res
}