maxjhandsome
/
llvm-project
forked from OSchip/llvm-project
1
0
Fork 0
Code Issues Pull Requests Packages Releases Wiki Activity
llvm-project/llvm/test/DebugInfo/cu-range-hole.ll

75 lines
3.3 KiB
LLVM
Raw Normal View History

If we see that we're emitting code for a function that doesn't have any lexical scopes then go ahead and turn on DW_AT_ranges for the compile unit since we would be claiming to describe in the CU a range for which we don't have information in the CU otherwise. llvm-svn: 203969
2014-03-15 04:53:49 +08:00
; REQUIRES: object-emission
; RUN: %llc_dwarf -O0 -filetype=obj %s -o %t
; RUN: llvm-dwarfdump %t | FileCheck %s
; Check that we emit ranges for this CU since we have a function with and
; without debug info.
Reapply DW_AT_low/high_pc patch: Use the range machinery for DW_AT_ranges and DW_AT_high/lo_pc. This commit moves us from a single range per subprogram to extending ranges if we are: a) In the same section, and b) In the same enclosing CU. This means we have more fine grained ranges for compile units, and fewer ranges overall when we have multiple functions in the same CU adjacent to each other in the object file. Also remove all of the earlier hacks around this functionality for function sections etc. Also update all of the testcases to take into account the merging functionality. with a fix for location entries in the debug_loc section: Make sure that debug loc entries are relative to the low_pc of the compile unit. This means that when we only have a single range that the offset should be just relative to the low_pc of the unit, for multiple ranges for a CU this means that we'll be relative to 0 which we emit along with DW_AT_ranges. This mostly shows up with linked binaries, so add a testcase with multiple CUs so that our location is going to be offset of a CU with a non-zero low_pc. llvm-svn: 204377
2014-03-21 03:16:16 +08:00
; Note: This depends upon the order of output in the .o file. Currently it's
; in order of the output to make sure that the CU has multiple ranges since
; there's a function in the middle. If they were together then it would have
; a single range and no DW_AT_ranges.
If we see that we're emitting code for a function that doesn't have any lexical scopes then go ahead and turn on DW_AT_ranges for the compile unit since we would be claiming to describe in the CU a range for which we don't have information in the CU otherwise. llvm-svn: 203969
2014-03-15 04:53:49 +08:00
; CHECK: DW_TAG_compile_unit
; CHECK: DW_AT_ranges
; CHECK: DW_TAG_subprogram
Reapply DW_AT_low/high_pc patch: Use the range machinery for DW_AT_ranges and DW_AT_high/lo_pc. This commit moves us from a single range per subprogram to extending ranges if we are: a) In the same section, and b) In the same enclosing CU. This means we have more fine grained ranges for compile units, and fewer ranges overall when we have multiple functions in the same CU adjacent to each other in the object file. Also remove all of the earlier hacks around this functionality for function sections etc. Also update all of the testcases to take into account the merging functionality. with a fix for location entries in the debug_loc section: Make sure that debug loc entries are relative to the low_pc of the compile unit. This means that when we only have a single range that the offset should be just relative to the low_pc of the unit, for multiple ranges for a CU this means that we'll be relative to 0 which we emit along with DW_AT_ranges. This mostly shows up with linked binaries, so add a testcase with multiple CUs so that our location is going to be offset of a CU with a non-zero low_pc. llvm-svn: 204377
2014-03-21 03:16:16 +08:00
; CHECK: DW_TAG_subprogram
If we see that we're emitting code for a function that doesn't have any lexical scopes then go ahead and turn on DW_AT_ranges for the compile unit since we would be claiming to describe in the CU a range for which we don't have information in the CU otherwise. llvm-svn: 203969
2014-03-15 04:53:49 +08:00
; Function Attrs: nounwind uwtable
Reapply DW_AT_low/high_pc patch: Use the range machinery for DW_AT_ranges and DW_AT_high/lo_pc. This commit moves us from a single range per subprogram to extending ranges if we are: a) In the same section, and b) In the same enclosing CU. This means we have more fine grained ranges for compile units, and fewer ranges overall when we have multiple functions in the same CU adjacent to each other in the object file. Also remove all of the earlier hacks around this functionality for function sections etc. Also update all of the testcases to take into account the merging functionality. with a fix for location entries in the debug_loc section: Make sure that debug loc entries are relative to the low_pc of the compile unit. This means that when we only have a single range that the offset should be just relative to the low_pc of the unit, for multiple ranges for a CU this means that we'll be relative to 0 which we emit along with DW_AT_ranges. This mostly shows up with linked binaries, so add a testcase with multiple CUs so that our location is going to be offset of a CU with a non-zero low_pc. llvm-svn: 204377
2014-03-21 03:16:16 +08:00
define i32 @b(i32 %c) #0 {
If we see that we're emitting code for a function that doesn't have any lexical scopes then go ahead and turn on DW_AT_ranges for the compile unit since we would be claiming to describe in the CU a range for which we don't have information in the CU otherwise. llvm-svn: 203969
2014-03-15 04:53:49 +08:00
entry:
Reapply DW_AT_low/high_pc patch: Use the range machinery for DW_AT_ranges and DW_AT_high/lo_pc. This commit moves us from a single range per subprogram to extending ranges if we are: a) In the same section, and b) In the same enclosing CU. This means we have more fine grained ranges for compile units, and fewer ranges overall when we have multiple functions in the same CU adjacent to each other in the object file. Also remove all of the earlier hacks around this functionality for function sections etc. Also update all of the testcases to take into account the merging functionality. with a fix for location entries in the debug_loc section: Make sure that debug loc entries are relative to the low_pc of the compile unit. This means that when we only have a single range that the offset should be just relative to the low_pc of the unit, for multiple ranges for a CU this means that we'll be relative to 0 which we emit along with DW_AT_ranges. This mostly shows up with linked binaries, so add a testcase with multiple CUs so that our location is going to be offset of a CU with a non-zero low_pc. llvm-svn: 204377
2014-03-21 03:16:16 +08:00
%c.addr = alloca i32, align 4
store i32 %c, i32* %c.addr, align 4
IR: Give 'DI' prefix to debug info metadata Finish off PR23080 by renaming the debug info IR constructs from `MD*` to `DI*`. The last of the `DIDescriptor` classes were deleted in r235356, and the last of the related typedefs removed in r235413, so this has all baked for about a week. Note: If you have out-of-tree code (like a frontend), I recommend that you get everything compiling and tests passing with the *previous* commit before updating to this one. It'll be easier to keep track of what code is using the `DIDescriptor` hierarchy and what you've already updated, and I think you're extremely unlikely to insert bugs. YMMV of course. Back to *this* commit: I did this using the rename-md-di-nodes.sh upgrade script I've attached to PR23080 (both code and testcases) and filtered through clang-format-diff.py. I edited the tests for test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns were off-by-three. It should work on your out-of-tree testcases (and code, if you've followed the advice in the previous paragraph). Some of the tests are in badly named files now (e.g., test/Assembler/invalid-mdcompositetype-missing-tag.ll should be 'dicompositetype'); I'll come back and move the files in a follow-up commit. llvm-svn: 236120
2015-04-30 00:38:44 +08:00
call void @llvm.dbg.declare(metadata i32* %c.addr, metadata !13, metadata !DIExpression()), !dbg !14
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%0 = load i32, i32* %c.addr, align 4, !dbg !14
Reapply DW_AT_low/high_pc patch: Use the range machinery for DW_AT_ranges and DW_AT_high/lo_pc. This commit moves us from a single range per subprogram to extending ranges if we are: a) In the same section, and b) In the same enclosing CU. This means we have more fine grained ranges for compile units, and fewer ranges overall when we have multiple functions in the same CU adjacent to each other in the object file. Also remove all of the earlier hacks around this functionality for function sections etc. Also update all of the testcases to take into account the merging functionality. with a fix for location entries in the debug_loc section: Make sure that debug loc entries are relative to the low_pc of the compile unit. This means that when we only have a single range that the offset should be just relative to the low_pc of the unit, for multiple ranges for a CU this means that we'll be relative to 0 which we emit along with DW_AT_ranges. This mostly shows up with linked binaries, so add a testcase with multiple CUs so that our location is going to be offset of a CU with a non-zero low_pc. llvm-svn: 204377
2014-03-21 03:16:16 +08:00
%add = add nsw i32 %0, 1, !dbg !14
If we see that we're emitting code for a function that doesn't have any lexical scopes then go ahead and turn on DW_AT_ranges for the compile unit since we would be claiming to describe in the CU a range for which we don't have information in the CU otherwise. llvm-svn: 203969
2014-03-15 04:53:49 +08:00
ret i32 %add, !dbg !14
}
; Function Attrs: nounwind uwtable
Reapply DW_AT_low/high_pc patch: Use the range machinery for DW_AT_ranges and DW_AT_high/lo_pc. This commit moves us from a single range per subprogram to extending ranges if we are: a) In the same section, and b) In the same enclosing CU. This means we have more fine grained ranges for compile units, and fewer ranges overall when we have multiple functions in the same CU adjacent to each other in the object file. Also remove all of the earlier hacks around this functionality for function sections etc. Also update all of the testcases to take into account the merging functionality. with a fix for location entries in the debug_loc section: Make sure that debug loc entries are relative to the low_pc of the compile unit. This means that when we only have a single range that the offset should be just relative to the low_pc of the unit, for multiple ranges for a CU this means that we'll be relative to 0 which we emit along with DW_AT_ranges. This mostly shows up with linked binaries, so add a testcase with multiple CUs so that our location is going to be offset of a CU with a non-zero low_pc. llvm-svn: 204377
2014-03-21 03:16:16 +08:00
define i32 @a(i32 %b) #0 {
If we see that we're emitting code for a function that doesn't have any lexical scopes then go ahead and turn on DW_AT_ranges for the compile unit since we would be claiming to describe in the CU a range for which we don't have information in the CU otherwise. llvm-svn: 203969
2014-03-15 04:53:49 +08:00
entry:
%b.addr = alloca i32, align 4
store i32 %b, i32* %b.addr, align 4
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%0 = load i32, i32* %b.addr, align 4
If we see that we're emitting code for a function that doesn't have any lexical scopes then go ahead and turn on DW_AT_ranges for the compile unit since we would be claiming to describe in the CU a range for which we don't have information in the CU otherwise. llvm-svn: 203969
2014-03-15 04:53:49 +08:00
%add = add nsw i32 %0, 1
ret i32 %add
}
Reapply DW_AT_low/high_pc patch: Use the range machinery for DW_AT_ranges and DW_AT_high/lo_pc. This commit moves us from a single range per subprogram to extending ranges if we are: a) In the same section, and b) In the same enclosing CU. This means we have more fine grained ranges for compile units, and fewer ranges overall when we have multiple functions in the same CU adjacent to each other in the object file. Also remove all of the earlier hacks around this functionality for function sections etc. Also update all of the testcases to take into account the merging functionality. with a fix for location entries in the debug_loc section: Make sure that debug loc entries are relative to the low_pc of the compile unit. This means that when we only have a single range that the offset should be just relative to the low_pc of the unit, for multiple ranges for a CU this means that we'll be relative to 0 which we emit along with DW_AT_ranges. This mostly shows up with linked binaries, so add a testcase with multiple CUs so that our location is going to be offset of a CU with a non-zero low_pc. llvm-svn: 204377
2014-03-21 03:16:16 +08:00
; Function Attrs: nounwind readnone
Move the complex address expression out of DIVariable and into an extra argument of the llvm.dbg.declare/llvm.dbg.value intrinsics. Previously, DIVariable was a variable-length field that has an optional reference to a Metadata array consisting of a variable number of complex address expressions. In the case of OpPiece expressions this is wasting a lot of storage in IR, because when an aggregate type is, e.g., SROA'd into all of its n individual members, the IR will contain n copies of the DIVariable, all alike, only differing in the complex address reference at the end. By making the complex address into an extra argument of the dbg.value/dbg.declare intrinsics, all of the pieces can reference the same variable and the complex address expressions can be uniqued across the CU, too. Down the road, this will allow us to move other flags, such as "indirection" out of the DIVariable, too. The new intrinsics look like this: declare void @llvm.dbg.declare(metadata %storage, metadata %var, metadata %expr) declare void @llvm.dbg.value(metadata %storage, i64 %offset, metadata %var, metadata %expr) This patch adds a new LLVM-local tag to DIExpressions, so we can detect and pretty-print DIExpression metadata nodes. What this patch doesn't do: This patch does not touch the "Indirect" field in DIVariable; but moving that into the expression would be a natural next step. http://reviews.llvm.org/D4919 rdar://problem/17994491 Thanks to dblaikie and dexonsmith for reviewing this patch! Note: I accidentally committed a bogus older version of this patch previously. llvm-svn: 218787
2014-10-02 02:55:02 +08:00
declare void @llvm.dbg.declare(metadata, metadata, metadata) #1
Reapply DW_AT_low/high_pc patch: Use the range machinery for DW_AT_ranges and DW_AT_high/lo_pc. This commit moves us from a single range per subprogram to extending ranges if we are: a) In the same section, and b) In the same enclosing CU. This means we have more fine grained ranges for compile units, and fewer ranges overall when we have multiple functions in the same CU adjacent to each other in the object file. Also remove all of the earlier hacks around this functionality for function sections etc. Also update all of the testcases to take into account the merging functionality. with a fix for location entries in the debug_loc section: Make sure that debug loc entries are relative to the low_pc of the compile unit. This means that when we only have a single range that the offset should be just relative to the low_pc of the unit, for multiple ranges for a CU this means that we'll be relative to 0 which we emit along with DW_AT_ranges. This mostly shows up with linked binaries, so add a testcase with multiple CUs so that our location is going to be offset of a CU with a non-zero low_pc. llvm-svn: 204377
2014-03-21 03:16:16 +08:00
; Function Attrs: nounwind uwtable
define i32 @d(i32 %e) #0 {
entry:
%e.addr = alloca i32, align 4
store i32 %e, i32* %e.addr, align 4
IR: Give 'DI' prefix to debug info metadata Finish off PR23080 by renaming the debug info IR constructs from `MD*` to `DI*`. The last of the `DIDescriptor` classes were deleted in r235356, and the last of the related typedefs removed in r235413, so this has all baked for about a week. Note: If you have out-of-tree code (like a frontend), I recommend that you get everything compiling and tests passing with the *previous* commit before updating to this one. It'll be easier to keep track of what code is using the `DIDescriptor` hierarchy and what you've already updated, and I think you're extremely unlikely to insert bugs. YMMV of course. Back to *this* commit: I did this using the rename-md-di-nodes.sh upgrade script I've attached to PR23080 (both code and testcases) and filtered through clang-format-diff.py. I edited the tests for test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns were off-by-three. It should work on your out-of-tree testcases (and code, if you've followed the advice in the previous paragraph). Some of the tests are in badly named files now (e.g., test/Assembler/invalid-mdcompositetype-missing-tag.ll should be 'dicompositetype'); I'll come back and move the files in a follow-up commit. llvm-svn: 236120
2015-04-30 00:38:44 +08:00
call void @llvm.dbg.declare(metadata i32* %e.addr, metadata !15, metadata !DIExpression()), !dbg !16
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%0 = load i32, i32* %e.addr, align 4, !dbg !16
Reapply DW_AT_low/high_pc patch: Use the range machinery for DW_AT_ranges and DW_AT_high/lo_pc. This commit moves us from a single range per subprogram to extending ranges if we are: a) In the same section, and b) In the same enclosing CU. This means we have more fine grained ranges for compile units, and fewer ranges overall when we have multiple functions in the same CU adjacent to each other in the object file. Also remove all of the earlier hacks around this functionality for function sections etc. Also update all of the testcases to take into account the merging functionality. with a fix for location entries in the debug_loc section: Make sure that debug loc entries are relative to the low_pc of the compile unit. This means that when we only have a single range that the offset should be just relative to the low_pc of the unit, for multiple ranges for a CU this means that we'll be relative to 0 which we emit along with DW_AT_ranges. This mostly shows up with linked binaries, so add a testcase with multiple CUs so that our location is going to be offset of a CU with a non-zero low_pc. llvm-svn: 204377
2014-03-21 03:16:16 +08:00
%add = add nsw i32 %0, 1, !dbg !16
ret i32 %add, !dbg !16
}
If we see that we're emitting code for a function that doesn't have any lexical scopes then go ahead and turn on DW_AT_ranges for the compile unit since we would be claiming to describe in the CU a range for which we don't have information in the CU otherwise. llvm-svn: 203969
2014-03-15 04:53:49 +08:00
attributes #0 = { nounwind uwtable "less-precise-fpmad"="false" "no-frame-pointer-elim"="true" "no-frame-pointer-elim-non-leaf" "no-infs-fp-math"="false" "no-nans-fp-math"="false" "stack-protector-buffer-size"="8" "unsafe-fp-math"="false" "use-soft-float"="false" }
attributes #1 = { nounwind readnone }
Reapply DW_AT_low/high_pc patch: Use the range machinery for DW_AT_ranges and DW_AT_high/lo_pc. This commit moves us from a single range per subprogram to extending ranges if we are: a) In the same section, and b) In the same enclosing CU. This means we have more fine grained ranges for compile units, and fewer ranges overall when we have multiple functions in the same CU adjacent to each other in the object file. Also remove all of the earlier hacks around this functionality for function sections etc. Also update all of the testcases to take into account the merging functionality. with a fix for location entries in the debug_loc section: Make sure that debug loc entries are relative to the low_pc of the compile unit. This means that when we only have a single range that the offset should be just relative to the low_pc of the unit, for multiple ranges for a CU this means that we'll be relative to 0 which we emit along with DW_AT_ranges. This mostly shows up with linked binaries, so add a testcase with multiple CUs so that our location is going to be offset of a CU with a non-zero low_pc. llvm-svn: 204377
2014-03-21 03:16:16 +08:00
!llvm.ident = !{!0, !0}
!llvm.dbg.cu = !{!1}
!llvm.module.flags = !{!11, !12}
IR: Make metadata typeless in assembly Now that `Metadata` is typeless, reflect that in the assembly. These are the matching assembly changes for the metadata/value split in r223802. - Only use the `metadata` type when referencing metadata from a call intrinsic -- i.e., only when it's used as a `Value`. - Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode` when referencing it from call intrinsics. So, assembly like this: define @foo(i32 %v) { call void @llvm.foo(metadata !{i32 %v}, metadata !0) call void @llvm.foo(metadata !{i32 7}, metadata !0) call void @llvm.foo(metadata !1, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{metadata !3}, metadata !0) ret void, !bar !2 } !0 = metadata !{metadata !2} !1 = metadata !{i32* @global} !2 = metadata !{metadata !3} !3 = metadata !{} turns into this: define @foo(i32 %v) { call void @llvm.foo(metadata i32 %v, metadata !0) call void @llvm.foo(metadata i32 7, metadata !0) call void @llvm.foo(metadata i32* @global, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{!3}, metadata !0) ret void, !bar !2 } !0 = !{!2} !1 = !{i32* @global} !2 = !{!3} !3 = !{} I wrote an upgrade script that handled almost all of the tests in llvm and many of the tests in cfe (even handling many `CHECK` lines). I've attached it (or will attach it in a moment if you're speedy) to PR21532 to help everyone update their out-of-tree testcases. This is part of PR21532. llvm-svn: 224257
2014-12-16 03:07:53 +08:00
!0 = !{!"clang version 3.5.0 (trunk 204164) (llvm/trunk 204183)"}
DI: Disallow uniquable DICompileUnits Since r241097, `DIBuilder` has only created distinct `DICompileUnit`s. The backend is liable to start relying on that (if it hasn't already), so make uniquable `DICompileUnit`s illegal and automatically upgrade old bitcode. This is a nice cleanup, since we can remove an unnecessary `DenseSet` (and the associated uniquing info) from `LLVMContextImpl`. Almost all the testcases were updated with this script: git grep -e '= !DICompileUnit' -l -- test | grep -v test/Bitcode | xargs sed -i '' -e 's,= !DICompileUnit,= distinct !DICompileUnit,' I imagine something similar should work for out-of-tree testcases. llvm-svn: 243885
2015-08-04 01:26:41 +08:00
!1 = distinct !DICompileUnit(language: DW_LANG_C99, producer: "clang version 3.5.0 (trunk 204164) (llvm/trunk 204183)", isOptimized: false, emissionKind: 1, file: !2, enums: !3, retainedTypes: !3, subprograms: !4, globals: !3, imports: !3)
IR: Give 'DI' prefix to debug info metadata Finish off PR23080 by renaming the debug info IR constructs from `MD*` to `DI*`. The last of the `DIDescriptor` classes were deleted in r235356, and the last of the related typedefs removed in r235413, so this has all baked for about a week. Note: If you have out-of-tree code (like a frontend), I recommend that you get everything compiling and tests passing with the *previous* commit before updating to this one. It'll be easier to keep track of what code is using the `DIDescriptor` hierarchy and what you've already updated, and I think you're extremely unlikely to insert bugs. YMMV of course. Back to *this* commit: I did this using the rename-md-di-nodes.sh upgrade script I've attached to PR23080 (both code and testcases) and filtered through clang-format-diff.py. I edited the tests for test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns were off-by-three. It should work on your out-of-tree testcases (and code, if you've followed the advice in the previous paragraph). Some of the tests are in badly named files now (e.g., test/Assembler/invalid-mdcompositetype-missing-tag.ll should be 'dicompositetype'); I'll come back and move the files in a follow-up commit. llvm-svn: 236120
2015-04-30 00:38:44 +08:00
!2 = !DIFile(filename: "b.c", directory: "/usr/local/google/home/echristo")
IR: Make metadata typeless in assembly Now that `Metadata` is typeless, reflect that in the assembly. These are the matching assembly changes for the metadata/value split in r223802. - Only use the `metadata` type when referencing metadata from a call intrinsic -- i.e., only when it's used as a `Value`. - Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode` when referencing it from call intrinsics. So, assembly like this: define @foo(i32 %v) { call void @llvm.foo(metadata !{i32 %v}, metadata !0) call void @llvm.foo(metadata !{i32 7}, metadata !0) call void @llvm.foo(metadata !1, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{metadata !3}, metadata !0) ret void, !bar !2 } !0 = metadata !{metadata !2} !1 = metadata !{i32* @global} !2 = metadata !{metadata !3} !3 = metadata !{} turns into this: define @foo(i32 %v) { call void @llvm.foo(metadata i32 %v, metadata !0) call void @llvm.foo(metadata i32 7, metadata !0) call void @llvm.foo(metadata i32* @global, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{!3}, metadata !0) ret void, !bar !2 } !0 = !{!2} !1 = !{i32* @global} !2 = !{!3} !3 = !{} I wrote an upgrade script that handled almost all of the tests in llvm and many of the tests in cfe (even handling many `CHECK` lines). I've attached it (or will attach it in a moment if you're speedy) to PR21532 to help everyone update their out-of-tree testcases. This is part of PR21532. llvm-svn: 224257
2014-12-16 03:07:53 +08:00
!3 = !{}
!4 = !{!5, !10}
IR: Give 'DI' prefix to debug info metadata Finish off PR23080 by renaming the debug info IR constructs from `MD*` to `DI*`. The last of the `DIDescriptor` classes were deleted in r235356, and the last of the related typedefs removed in r235413, so this has all baked for about a week. Note: If you have out-of-tree code (like a frontend), I recommend that you get everything compiling and tests passing with the *previous* commit before updating to this one. It'll be easier to keep track of what code is using the `DIDescriptor` hierarchy and what you've already updated, and I think you're extremely unlikely to insert bugs. YMMV of course. Back to *this* commit: I did this using the rename-md-di-nodes.sh upgrade script I've attached to PR23080 (both code and testcases) and filtered through clang-format-diff.py. I edited the tests for test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns were off-by-three. It should work on your out-of-tree testcases (and code, if you've followed the advice in the previous paragraph). Some of the tests are in badly named files now (e.g., test/Assembler/invalid-mdcompositetype-missing-tag.ll should be 'dicompositetype'); I'll come back and move the files in a follow-up commit. llvm-svn: 236120
2015-04-30 00:38:44 +08:00
!5 = !DISubprogram(name: "b", line: 1, isLocal: false, isDefinition: true, virtualIndex: 6, flags: DIFlagPrototyped, isOptimized: false, scopeLine: 1, file: !2, scope: !6, type: !7, function: i32 (i32)* @b, variables: !3)
!6 = !DIFile(filename: "b.c", directory: "/usr/local/google/home/echristo")
!7 = !DISubroutineType(types: !8)
IR: Make metadata typeless in assembly Now that `Metadata` is typeless, reflect that in the assembly. These are the matching assembly changes for the metadata/value split in r223802. - Only use the `metadata` type when referencing metadata from a call intrinsic -- i.e., only when it's used as a `Value`. - Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode` when referencing it from call intrinsics. So, assembly like this: define @foo(i32 %v) { call void @llvm.foo(metadata !{i32 %v}, metadata !0) call void @llvm.foo(metadata !{i32 7}, metadata !0) call void @llvm.foo(metadata !1, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{metadata !3}, metadata !0) ret void, !bar !2 } !0 = metadata !{metadata !2} !1 = metadata !{i32* @global} !2 = metadata !{metadata !3} !3 = metadata !{} turns into this: define @foo(i32 %v) { call void @llvm.foo(metadata i32 %v, metadata !0) call void @llvm.foo(metadata i32 7, metadata !0) call void @llvm.foo(metadata i32* @global, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{!3}, metadata !0) ret void, !bar !2 } !0 = !{!2} !1 = !{i32* @global} !2 = !{!3} !3 = !{} I wrote an upgrade script that handled almost all of the tests in llvm and many of the tests in cfe (even handling many `CHECK` lines). I've attached it (or will attach it in a moment if you're speedy) to PR21532 to help everyone update their out-of-tree testcases. This is part of PR21532. llvm-svn: 224257
2014-12-16 03:07:53 +08:00
!8 = !{!9, !9}
IR: Give 'DI' prefix to debug info metadata Finish off PR23080 by renaming the debug info IR constructs from `MD*` to `DI*`. The last of the `DIDescriptor` classes were deleted in r235356, and the last of the related typedefs removed in r235413, so this has all baked for about a week. Note: If you have out-of-tree code (like a frontend), I recommend that you get everything compiling and tests passing with the *previous* commit before updating to this one. It'll be easier to keep track of what code is using the `DIDescriptor` hierarchy and what you've already updated, and I think you're extremely unlikely to insert bugs. YMMV of course. Back to *this* commit: I did this using the rename-md-di-nodes.sh upgrade script I've attached to PR23080 (both code and testcases) and filtered through clang-format-diff.py. I edited the tests for test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns were off-by-three. It should work on your out-of-tree testcases (and code, if you've followed the advice in the previous paragraph). Some of the tests are in badly named files now (e.g., test/Assembler/invalid-mdcompositetype-missing-tag.ll should be 'dicompositetype'); I'll come back and move the files in a follow-up commit. llvm-svn: 236120
2015-04-30 00:38:44 +08:00
!9 = !DIBasicType(tag: DW_TAG_base_type, name: "int", size: 32, align: 32, encoding: DW_ATE_signed)
!10 = !DISubprogram(name: "d", line: 3, isLocal: false, isDefinition: true, virtualIndex: 6, flags: DIFlagPrototyped, isOptimized: false, scopeLine: 3, file: !2, scope: !6, type: !7, function: i32 (i32)* @d, variables: !3)
IR: Make metadata typeless in assembly Now that `Metadata` is typeless, reflect that in the assembly. These are the matching assembly changes for the metadata/value split in r223802. - Only use the `metadata` type when referencing metadata from a call intrinsic -- i.e., only when it's used as a `Value`. - Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode` when referencing it from call intrinsics. So, assembly like this: define @foo(i32 %v) { call void @llvm.foo(metadata !{i32 %v}, metadata !0) call void @llvm.foo(metadata !{i32 7}, metadata !0) call void @llvm.foo(metadata !1, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{metadata !3}, metadata !0) ret void, !bar !2 } !0 = metadata !{metadata !2} !1 = metadata !{i32* @global} !2 = metadata !{metadata !3} !3 = metadata !{} turns into this: define @foo(i32 %v) { call void @llvm.foo(metadata i32 %v, metadata !0) call void @llvm.foo(metadata i32 7, metadata !0) call void @llvm.foo(metadata i32* @global, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{!3}, metadata !0) ret void, !bar !2 } !0 = !{!2} !1 = !{i32* @global} !2 = !{!3} !3 = !{} I wrote an upgrade script that handled almost all of the tests in llvm and many of the tests in cfe (even handling many `CHECK` lines). I've attached it (or will attach it in a moment if you're speedy) to PR21532 to help everyone update their out-of-tree testcases. This is part of PR21532. llvm-svn: 224257
2014-12-16 03:07:53 +08:00
!11 = !{i32 2, !"Dwarf Version", i32 4}
DebugInfo: Move new hierarchy into place Move the specialized metadata nodes for the new debug info hierarchy into place, finishing off PR22464. I've done bootstraps (and all that) and I'm confident this commit is NFC as far as DWARF output is concerned. Let me know if I'm wrong :). The code changes are fairly mechanical: - Bumped the "Debug Info Version". - `DIBuilder` now creates the appropriate subclass of `MDNode`. - Subclasses of DIDescriptor now expect to hold their "MD" counterparts (e.g., `DIBasicType` expects `MDBasicType`). - Deleted a ton of dead code in `AsmWriter.cpp` and `DebugInfo.cpp` for printing comments. - Big update to LangRef to describe the nodes in the new hierarchy. Feel free to make it better. Testcase changes are enormous. There's an accompanying clang commit on its way. If you have out-of-tree debug info testcases, I just broke your build. - `upgrade-specialized-nodes.sh` is attached to PR22564. I used it to update all the IR testcases. - Unfortunately I failed to find way to script the updates to CHECK lines, so I updated all of these by hand. This was fairly painful, since the old CHECKs are difficult to reason about. That's one of the benefits of the new hierarchy. This work isn't quite finished, BTW. The `DIDescriptor` subclasses are almost empty wrappers, but not quite: they still have loose casting checks (see the `RETURN_FROM_RAW()` macro). Once they're completely gutted, I'll rename the "MD" classes to "DI" and kill the wrappers. I also expect to make a few schema changes now that it's easier to reason about everything. llvm-svn: 231082
2015-03-04 01:24:31 +08:00
!12 = !{i32 1, !"Debug Info Version", i32 3}
DI: Remove DW_TAG_arg_variable and DW_TAG_auto_variable Remove the fake `DW_TAG_auto_variable` and `DW_TAG_arg_variable` tags, using `DW_TAG_variable` in their place Stop exposing the `tag:` field at all in the assembly format for `DILocalVariable`. Most of the testcase updates were generated by the following sed script: find test/ -name "*.ll" -o -name "*.mir" | xargs grep -l 'DILocalVariable' | xargs sed -i '' \ -e 's/tag: DW_TAG_arg_variable, //' \ -e 's/tag: DW_TAG_auto_variable, //' There were only a handful of tests in `test/Assembly` that I needed to update by hand. (Note: a follow-up could change `DILocalVariable::DILocalVariable()` to set the tag to `DW_TAG_formal_parameter` instead of `DW_TAG_variable` (as appropriate), instead of having that logic magically in the backend in `DbgVariable`. I've added a FIXME to that effect.) llvm-svn: 243774
2015-08-01 02:58:39 +08:00
!13 = !DILocalVariable(name: "c", line: 1, arg: 1, scope: !5, file: !6, type: !9)
IR: Give 'DI' prefix to debug info metadata Finish off PR23080 by renaming the debug info IR constructs from `MD*` to `DI*`. The last of the `DIDescriptor` classes were deleted in r235356, and the last of the related typedefs removed in r235413, so this has all baked for about a week. Note: If you have out-of-tree code (like a frontend), I recommend that you get everything compiling and tests passing with the *previous* commit before updating to this one. It'll be easier to keep track of what code is using the `DIDescriptor` hierarchy and what you've already updated, and I think you're extremely unlikely to insert bugs. YMMV of course. Back to *this* commit: I did this using the rename-md-di-nodes.sh upgrade script I've attached to PR23080 (both code and testcases) and filtered through clang-format-diff.py. I edited the tests for test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns were off-by-three. It should work on your out-of-tree testcases (and code, if you've followed the advice in the previous paragraph). Some of the tests are in badly named files now (e.g., test/Assembler/invalid-mdcompositetype-missing-tag.ll should be 'dicompositetype'); I'll come back and move the files in a follow-up commit. llvm-svn: 236120
2015-04-30 00:38:44 +08:00
!14 = !DILocation(line: 1, scope: !5)
DI: Remove DW_TAG_arg_variable and DW_TAG_auto_variable Remove the fake `DW_TAG_auto_variable` and `DW_TAG_arg_variable` tags, using `DW_TAG_variable` in their place Stop exposing the `tag:` field at all in the assembly format for `DILocalVariable`. Most of the testcase updates were generated by the following sed script: find test/ -name "*.ll" -o -name "*.mir" | xargs grep -l 'DILocalVariable' | xargs sed -i '' \ -e 's/tag: DW_TAG_arg_variable, //' \ -e 's/tag: DW_TAG_auto_variable, //' There were only a handful of tests in `test/Assembly` that I needed to update by hand. (Note: a follow-up could change `DILocalVariable::DILocalVariable()` to set the tag to `DW_TAG_formal_parameter` instead of `DW_TAG_variable` (as appropriate), instead of having that logic magically in the backend in `DbgVariable`. I've added a FIXME to that effect.) llvm-svn: 243774
2015-08-01 02:58:39 +08:00
!15 = !DILocalVariable(name: "e", line: 3, arg: 1, scope: !10, file: !6, type: !9)
IR: Give 'DI' prefix to debug info metadata Finish off PR23080 by renaming the debug info IR constructs from `MD*` to `DI*`. The last of the `DIDescriptor` classes were deleted in r235356, and the last of the related typedefs removed in r235413, so this has all baked for about a week. Note: If you have out-of-tree code (like a frontend), I recommend that you get everything compiling and tests passing with the *previous* commit before updating to this one. It'll be easier to keep track of what code is using the `DIDescriptor` hierarchy and what you've already updated, and I think you're extremely unlikely to insert bugs. YMMV of course. Back to *this* commit: I did this using the rename-md-di-nodes.sh upgrade script I've attached to PR23080 (both code and testcases) and filtered through clang-format-diff.py. I edited the tests for test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns were off-by-three. It should work on your out-of-tree testcases (and code, if you've followed the advice in the previous paragraph). Some of the tests are in badly named files now (e.g., test/Assembler/invalid-mdcompositetype-missing-tag.ll should be 'dicompositetype'); I'll come back and move the files in a follow-up commit. llvm-svn: 236120
2015-04-30 00:38:44 +08:00
!16 = !DILocation(line: 3, scope: !10)