maxjhandsome
/
llvm-project
forked from OSchip/llvm-project
1
0
Fork 0
Code Issues Pull Requests Packages Releases Wiki Activity
llvm-project/llvm/test/DebugInfo/Generic/nodebug.ll

52 lines
1.9 KiB
LLVM
Raw Normal View History

Recommit r212203: Don't try to construct debug LexicalScopes hierarchy for functions that do not have top level debug information. Reverted by Eric Christopher (Thanks!) in r212203 after Bob Wilson reported LTO issues. Duncan Exon Smith and Aditya Nandakumar helped provide a reduced reproduction, though the failure wasn't too hard to guess, and even easier with the example to confirm. The assertion that the subprogram metadata associated with an llvm::Function matches the scope data referenced by the DbgLocs on the instructions in that function is not valid under LTO. In LTO, a C++ inline function might exist in multiple CUs and the subprogram metadata nodes will refer to the same llvm::Function. In this case, depending on the order of the CUs, the first intance of the subprogram metadata may not be the one referenced by the instructions in that function and the assertion will fail. A test case (test/DebugInfo/cross-cu-linkonce-distinct.ll) is added, the assertion removed and a comment added to explain this situation. This was then reverted again in r213581 as it caused PR20367. The root cause of this was the early exit in LiveDebugVariables meant that spurious DBG_VALUE intrinsics that referenced dead variables were not removed, causing an assertion/crash later on. The fix is to have LiveDebugVariables strip all DBG_VALUE intrinsics in functions without debug info as they're not needed anyway. Test case added to cover this situation (that occurs when a debug-having function is inlined into a nodebug function) in test/DebugInfo/X86/nodebug_with_debug_loc.ll Original commit message: If a function isn't actually in a CU's subprogram list in the debug info metadata, ignore all the DebugLocs and don't try to build scopes, track variables, etc. While this is possibly a minor optimization, it's also a correctness fix for an incoming patch that will add assertions to LexicalScopes and the debug info verifier to ensure that all scope chains lead to debug info for the current function. Fix up a few test cases that had broken/incomplete debug info that could violate this constraint. Add a test case where this occurs by design (inlining a debug-info-having function in an attribute nodebug function - we want this to work because /if/ the nodebug function is then inlined into a debug-info-having function, it should be fine (and will work fine - we just stitch the scopes up as usual), but should the inlining not happen we need to not assert fail either). llvm-svn: 213952
2014-07-26 00:10:16 +08:00
; REQUIRES: object-emission
; RUN: %llc_dwarf < %s -filetype=obj | llvm-dwarfdump -debug-dump=info - | FileCheck %s
; Test that a nodebug function (a function not appearing in the debug info IR
; metadata subprogram list) with DebugLocs on its IR doesn't cause crashes/does
; the right thing.
; Build with clang from the following:
; extern int i;
; inline __attribute__((always_inline)) void f1() {
; i = 3;
; }
;
; __attribute__((nodebug)) void f2() {
; f1();
; }
; Check that there's only one DW_TAG_subprogram, nothing for the 'f2' function.
; CHECK: DW_TAG_subprogram
; CHECK-NOT: DW_TAG
; CHECK: DW_AT_name {{.*}} "f1"
; CHECK-NOT: DW_TAG_subprogram
@i = external global i32
; Function Attrs: uwtable
define void @_Z2f2v() #0 {
entry:
store i32 3, i32* @i, align 4, !dbg !11
ret void
}
attributes #0 = { uwtable "less-precise-fpmad"="false" "no-frame-pointer-elim"="true" "no-frame-pointer-elim-non-leaf" "no-infs-fp-math"="false" "no-nans-fp-math"="false" "stack-protector-buffer-size"="8" "unsafe-fp-math"="false" "use-soft-float"="false" }
!llvm.dbg.cu = !{!0}
!llvm.module.flags = !{!8, !9}
!llvm.ident = !{!10}
DI: Disallow uniquable DICompileUnits Since r241097, `DIBuilder` has only created distinct `DICompileUnit`s. The backend is liable to start relying on that (if it hasn't already), so make uniquable `DICompileUnit`s illegal and automatically upgrade old bitcode. This is a nice cleanup, since we can remove an unnecessary `DenseSet` (and the associated uniquing info) from `LLVMContextImpl`. Almost all the testcases were updated with this script: git grep -e '= !DICompileUnit' -l -- test | grep -v test/Bitcode | xargs sed -i '' -e 's,= !DICompileUnit,= distinct !DICompileUnit,' I imagine something similar should work for out-of-tree testcases. llvm-svn: 243885
2015-08-04 01:26:41 +08:00
!0 = distinct !DICompileUnit(language: DW_LANG_C_plus_plus, producer: "clang version 3.5.0 ", isOptimized: false, emissionKind: 1, file: !1, enums: !2, retainedTypes: !2, subprograms: !3, globals: !2, imports: !2)
IR: Give 'DI' prefix to debug info metadata Finish off PR23080 by renaming the debug info IR constructs from `MD*` to `DI*`. The last of the `DIDescriptor` classes were deleted in r235356, and the last of the related typedefs removed in r235413, so this has all baked for about a week. Note: If you have out-of-tree code (like a frontend), I recommend that you get everything compiling and tests passing with the *previous* commit before updating to this one. It'll be easier to keep track of what code is using the `DIDescriptor` hierarchy and what you've already updated, and I think you're extremely unlikely to insert bugs. YMMV of course. Back to *this* commit: I did this using the rename-md-di-nodes.sh upgrade script I've attached to PR23080 (both code and testcases) and filtered through clang-format-diff.py. I edited the tests for test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns were off-by-three. It should work on your out-of-tree testcases (and code, if you've followed the advice in the previous paragraph). Some of the tests are in badly named files now (e.g., test/Assembler/invalid-mdcompositetype-missing-tag.ll should be 'dicompositetype'); I'll come back and move the files in a follow-up commit. llvm-svn: 236120
2015-04-30 00:38:44 +08:00
!1 = !DIFile(filename: "nodebug.cpp", directory: "/tmp/dbginfo")
IR: Make metadata typeless in assembly Now that `Metadata` is typeless, reflect that in the assembly. These are the matching assembly changes for the metadata/value split in r223802. - Only use the `metadata` type when referencing metadata from a call intrinsic -- i.e., only when it's used as a `Value`. - Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode` when referencing it from call intrinsics. So, assembly like this: define @foo(i32 %v) { call void @llvm.foo(metadata !{i32 %v}, metadata !0) call void @llvm.foo(metadata !{i32 7}, metadata !0) call void @llvm.foo(metadata !1, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{metadata !3}, metadata !0) ret void, !bar !2 } !0 = metadata !{metadata !2} !1 = metadata !{i32* @global} !2 = metadata !{metadata !3} !3 = metadata !{} turns into this: define @foo(i32 %v) { call void @llvm.foo(metadata i32 %v, metadata !0) call void @llvm.foo(metadata i32 7, metadata !0) call void @llvm.foo(metadata i32* @global, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{!3}, metadata !0) ret void, !bar !2 } !0 = !{!2} !1 = !{i32* @global} !2 = !{!3} !3 = !{} I wrote an upgrade script that handled almost all of the tests in llvm and many of the tests in cfe (even handling many `CHECK` lines). I've attached it (or will attach it in a moment if you're speedy) to PR21532 to help everyone update their out-of-tree testcases. This is part of PR21532. llvm-svn: 224257
2014-12-16 03:07:53 +08:00
!2 = !{}
!3 = !{!4}
DI: Require subprogram definitions to be distinct As a follow-up to r246098, require `DISubprogram` definitions (`isDefinition: true`) to be 'distinct'. Specifically, add an assembler check, a verifier check, and bitcode upgrading logic to combat testcase bitrot after the `DIBuilder` change. While working on the testcases, I realized that test/Linker/subprogram-linkonce-weak-odr.ll isn't relevant anymore. Its purpose was to check for a corner case in PR22792 where two subprogram definitions match exactly and share the same metadata node. The new verifier check, requiring that subprogram definitions are 'distinct', precludes that possibility. I updated almost all the IR with the following script: git grep -l -E -e '= !DISubprogram\(.* isDefinition: true' | grep -v test/Bitcode | xargs sed -i '' -e 's/= \(!DISubprogram(.*, isDefinition: true\)/= distinct \1/' Likely some variant of would work for out-of-tree testcases. llvm-svn: 246327
2015-08-29 04:26:49 +08:00
!4 = distinct !DISubprogram(name: "f1", linkageName: "_Z2f1v", line: 2, isLocal: false, isDefinition: true, virtualIndex: 6, flags: DIFlagPrototyped, isOptimized: false, scopeLine: 2, file: !1, scope: !5, type: !6, variables: !2)
IR: Give 'DI' prefix to debug info metadata Finish off PR23080 by renaming the debug info IR constructs from `MD*` to `DI*`. The last of the `DIDescriptor` classes were deleted in r235356, and the last of the related typedefs removed in r235413, so this has all baked for about a week. Note: If you have out-of-tree code (like a frontend), I recommend that you get everything compiling and tests passing with the *previous* commit before updating to this one. It'll be easier to keep track of what code is using the `DIDescriptor` hierarchy and what you've already updated, and I think you're extremely unlikely to insert bugs. YMMV of course. Back to *this* commit: I did this using the rename-md-di-nodes.sh upgrade script I've attached to PR23080 (both code and testcases) and filtered through clang-format-diff.py. I edited the tests for test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns were off-by-three. It should work on your out-of-tree testcases (and code, if you've followed the advice in the previous paragraph). Some of the tests are in badly named files now (e.g., test/Assembler/invalid-mdcompositetype-missing-tag.ll should be 'dicompositetype'); I'll come back and move the files in a follow-up commit. llvm-svn: 236120
2015-04-30 00:38:44 +08:00
!5 = !DIFile(filename: "nodebug.cpp", directory: "/tmp/dbginfo")
!6 = !DISubroutineType(types: !7)
IR: Make metadata typeless in assembly Now that `Metadata` is typeless, reflect that in the assembly. These are the matching assembly changes for the metadata/value split in r223802. - Only use the `metadata` type when referencing metadata from a call intrinsic -- i.e., only when it's used as a `Value`. - Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode` when referencing it from call intrinsics. So, assembly like this: define @foo(i32 %v) { call void @llvm.foo(metadata !{i32 %v}, metadata !0) call void @llvm.foo(metadata !{i32 7}, metadata !0) call void @llvm.foo(metadata !1, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{metadata !3}, metadata !0) ret void, !bar !2 } !0 = metadata !{metadata !2} !1 = metadata !{i32* @global} !2 = metadata !{metadata !3} !3 = metadata !{} turns into this: define @foo(i32 %v) { call void @llvm.foo(metadata i32 %v, metadata !0) call void @llvm.foo(metadata i32 7, metadata !0) call void @llvm.foo(metadata i32* @global, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{!3}, metadata !0) ret void, !bar !2 } !0 = !{!2} !1 = !{i32* @global} !2 = !{!3} !3 = !{} I wrote an upgrade script that handled almost all of the tests in llvm and many of the tests in cfe (even handling many `CHECK` lines). I've attached it (or will attach it in a moment if you're speedy) to PR21532 to help everyone update their out-of-tree testcases. This is part of PR21532. llvm-svn: 224257
2014-12-16 03:07:53 +08:00
!7 = !{null}
!8 = !{i32 2, !"Dwarf Version", i32 4}
DebugInfo: Move new hierarchy into place Move the specialized metadata nodes for the new debug info hierarchy into place, finishing off PR22464. I've done bootstraps (and all that) and I'm confident this commit is NFC as far as DWARF output is concerned. Let me know if I'm wrong :). The code changes are fairly mechanical: - Bumped the "Debug Info Version". - `DIBuilder` now creates the appropriate subclass of `MDNode`. - Subclasses of DIDescriptor now expect to hold their "MD" counterparts (e.g., `DIBasicType` expects `MDBasicType`). - Deleted a ton of dead code in `AsmWriter.cpp` and `DebugInfo.cpp` for printing comments. - Big update to LangRef to describe the nodes in the new hierarchy. Feel free to make it better. Testcase changes are enormous. There's an accompanying clang commit on its way. If you have out-of-tree debug info testcases, I just broke your build. - `upgrade-specialized-nodes.sh` is attached to PR22564. I used it to update all the IR testcases. - Unfortunately I failed to find way to script the updates to CHECK lines, so I updated all of these by hand. This was fairly painful, since the old CHECKs are difficult to reason about. That's one of the benefits of the new hierarchy. This work isn't quite finished, BTW. The `DIDescriptor` subclasses are almost empty wrappers, but not quite: they still have loose casting checks (see the `RETURN_FROM_RAW()` macro). Once they're completely gutted, I'll rename the "MD" classes to "DI" and kill the wrappers. I also expect to make a few schema changes now that it's easier to reason about everything. llvm-svn: 231082
2015-03-04 01:24:31 +08:00
!9 = !{i32 2, !"Debug Info Version", i32 3}
IR: Make metadata typeless in assembly Now that `Metadata` is typeless, reflect that in the assembly. These are the matching assembly changes for the metadata/value split in r223802. - Only use the `metadata` type when referencing metadata from a call intrinsic -- i.e., only when it's used as a `Value`. - Stop pretending that `ValueAsMetadata` is wrapped in an `MDNode` when referencing it from call intrinsics. So, assembly like this: define @foo(i32 %v) { call void @llvm.foo(metadata !{i32 %v}, metadata !0) call void @llvm.foo(metadata !{i32 7}, metadata !0) call void @llvm.foo(metadata !1, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{metadata !3}, metadata !0) ret void, !bar !2 } !0 = metadata !{metadata !2} !1 = metadata !{i32* @global} !2 = metadata !{metadata !3} !3 = metadata !{} turns into this: define @foo(i32 %v) { call void @llvm.foo(metadata i32 %v, metadata !0) call void @llvm.foo(metadata i32 7, metadata !0) call void @llvm.foo(metadata i32* @global, metadata !0) call void @llvm.foo(metadata !3, metadata !0) call void @llvm.foo(metadata !{!3}, metadata !0) ret void, !bar !2 } !0 = !{!2} !1 = !{i32* @global} !2 = !{!3} !3 = !{} I wrote an upgrade script that handled almost all of the tests in llvm and many of the tests in cfe (even handling many `CHECK` lines). I've attached it (or will attach it in a moment if you're speedy) to PR21532 to help everyone update their out-of-tree testcases. This is part of PR21532. llvm-svn: 224257
2014-12-16 03:07:53 +08:00
!10 = !{!"clang version 3.5.0 "}
IR: Give 'DI' prefix to debug info metadata Finish off PR23080 by renaming the debug info IR constructs from `MD*` to `DI*`. The last of the `DIDescriptor` classes were deleted in r235356, and the last of the related typedefs removed in r235413, so this has all baked for about a week. Note: If you have out-of-tree code (like a frontend), I recommend that you get everything compiling and tests passing with the *previous* commit before updating to this one. It'll be easier to keep track of what code is using the `DIDescriptor` hierarchy and what you've already updated, and I think you're extremely unlikely to insert bugs. YMMV of course. Back to *this* commit: I did this using the rename-md-di-nodes.sh upgrade script I've attached to PR23080 (both code and testcases) and filtered through clang-format-diff.py. I edited the tests for test/Assembler/invalid-generic-debug-node-*.ll by hand since the columns were off-by-three. It should work on your out-of-tree testcases (and code, if you've followed the advice in the previous paragraph). Some of the tests are in badly named files now (e.g., test/Assembler/invalid-mdcompositetype-missing-tag.ll should be 'dicompositetype'); I'll come back and move the files in a follow-up commit. llvm-svn: 236120
2015-04-30 00:38:44 +08:00
!11 = !DILocation(line: 3, scope: !4)