maxjhandsome
/
llvm-project
forked from OSchip/llvm-project
1
0
Fork 0
Code Issues Pull Requests Packages Releases Wiki Activity
llvm-project/llvm/test/Bitcode/thinlto-function-summary-ca...

122 lines
4.0 KiB
LLVM
Raw Normal View History

Restrict call metadata based hotness detection to Sample PGO mode Summary: Don't use the metadata on call instructions for determining hotness unless we are in sample PGO mode, where it is needed because profile counts are not accurate. In instrumentation mode this is not necessary and does more harm than good when calls have VP metadata that hasn't been properly scaled after transformations or dropped after constant prop based devirtualization (both should be fixed, but we don't need to do this in the first place for instrumentation PGO). This required adjusting a number of tests to distinguish between sample and instrumentation PGO handling, and to add in profile summary metadata so that getProfileCount can get the summary. Reviewers: davidxl, danielcdh Subscribers: aemerson, rengolin, mehdi_amini, Prazek, llvm-commits Differential Revision: https://reviews.llvm.org/D32877 llvm-svn: 302844
2017-05-12 07:18:05 +08:00
; Test to check the callgraph in summary when there is PGO
; RUN: opt -module-summary %s -o %t.o
; RUN: llvm-bcanalyzer -dump %t.o | FileCheck %s
Do not want to use BFI to get profile count for sample pgo Summary: For SamplePGO, we already record the callsite count in the call instruction itself. So we do not want to use BFI to get profile count as it is less accurate. Reviewers: tejohnson, davidxl, eraman Reviewed By: eraman Subscribers: sanjoy, llvm-commits, mehdi_amini Differential Revision: https://reviews.llvm.org/D36025 llvm-svn: 309964
2017-08-04 01:11:41 +08:00
; RUN: opt -module-summary %p/Inputs/thinlto-function-summary-callgraph-sample-profile-summary.ll -o %t2.o
Restrict call metadata based hotness detection to Sample PGO mode Summary: Don't use the metadata on call instructions for determining hotness unless we are in sample PGO mode, where it is needed because profile counts are not accurate. In instrumentation mode this is not necessary and does more harm than good when calls have VP metadata that hasn't been properly scaled after transformations or dropped after constant prop based devirtualization (both should be fixed, but we don't need to do this in the first place for instrumentation PGO). This required adjusting a number of tests to distinguish between sample and instrumentation PGO handling, and to add in profile summary metadata so that getProfileCount can get the summary. Reviewers: davidxl, danielcdh Subscribers: aemerson, rengolin, mehdi_amini, Prazek, llvm-commits Differential Revision: https://reviews.llvm.org/D32877 llvm-svn: 302844
2017-05-12 07:18:05 +08:00
; RUN: llvm-lto -thinlto -o %t3 %t.o %t2.o
; RUN: llvm-bcanalyzer -dump %t3.thinlto.bc | FileCheck %s --check-prefix=COMBINED
; CHECK: <SOURCE_FILENAME
; "hot_function"
; CHECK-NEXT: <FUNCTION op0=0 op1=12
; "hot1"
; CHECK-NEXT: <FUNCTION op0=12 op1=4
; "hot2"
; CHECK-NEXT: <FUNCTION op0=16 op1=4
; "hot3"
; CHECK-NEXT: <FUNCTION op0=20 op1=4
; "hot4"
Do not want to use BFI to get profile count for sample pgo Summary: For SamplePGO, we already record the callsite count in the call instruction itself. So we do not want to use BFI to get profile count as it is less accurate. Reviewers: tejohnson, davidxl, eraman Reviewed By: eraman Subscribers: sanjoy, llvm-commits, mehdi_amini Differential Revision: https://reviews.llvm.org/D36025 llvm-svn: 309964
2017-08-04 01:11:41 +08:00
; CHECK-NEXT: <FUNCTION op0=24 op1=5
Restrict call metadata based hotness detection to Sample PGO mode Summary: Don't use the metadata on call instructions for determining hotness unless we are in sample PGO mode, where it is needed because profile counts are not accurate. In instrumentation mode this is not necessary and does more harm than good when calls have VP metadata that hasn't been properly scaled after transformations or dropped after constant prop based devirtualization (both should be fixed, but we don't need to do this in the first place for instrumentation PGO). This required adjusting a number of tests to distinguish between sample and instrumentation PGO handling, and to add in profile summary metadata so that getProfileCount can get the summary. Reviewers: davidxl, danielcdh Subscribers: aemerson, rengolin, mehdi_amini, Prazek, llvm-commits Differential Revision: https://reviews.llvm.org/D32877 llvm-svn: 302844
2017-05-12 07:18:05 +08:00
; "cold"
Do not want to use BFI to get profile count for sample pgo Summary: For SamplePGO, we already record the callsite count in the call instruction itself. So we do not want to use BFI to get profile count as it is less accurate. Reviewers: tejohnson, davidxl, eraman Reviewed By: eraman Subscribers: sanjoy, llvm-commits, mehdi_amini Differential Revision: https://reviews.llvm.org/D36025 llvm-svn: 309964
2017-08-04 01:11:41 +08:00
; CHECK-NEXT: <FUNCTION op0=29 op1=5
Restrict call metadata based hotness detection to Sample PGO mode Summary: Don't use the metadata on call instructions for determining hotness unless we are in sample PGO mode, where it is needed because profile counts are not accurate. In instrumentation mode this is not necessary and does more harm than good when calls have VP metadata that hasn't been properly scaled after transformations or dropped after constant prop based devirtualization (both should be fixed, but we don't need to do this in the first place for instrumentation PGO). This required adjusting a number of tests to distinguish between sample and instrumentation PGO handling, and to add in profile summary metadata so that getProfileCount can get the summary. Reviewers: davidxl, danielcdh Subscribers: aemerson, rengolin, mehdi_amini, Prazek, llvm-commits Differential Revision: https://reviews.llvm.org/D32877 llvm-svn: 302844
2017-05-12 07:18:05 +08:00
; "none1"
Do not want to use BFI to get profile count for sample pgo Summary: For SamplePGO, we already record the callsite count in the call instruction itself. So we do not want to use BFI to get profile count as it is less accurate. Reviewers: tejohnson, davidxl, eraman Reviewed By: eraman Subscribers: sanjoy, llvm-commits, mehdi_amini Differential Revision: https://reviews.llvm.org/D36025 llvm-svn: 309964
2017-08-04 01:11:41 +08:00
; CHECK-NEXT: <FUNCTION op0=34 op1=5
Restrict call metadata based hotness detection to Sample PGO mode Summary: Don't use the metadata on call instructions for determining hotness unless we are in sample PGO mode, where it is needed because profile counts are not accurate. In instrumentation mode this is not necessary and does more harm than good when calls have VP metadata that hasn't been properly scaled after transformations or dropped after constant prop based devirtualization (both should be fixed, but we don't need to do this in the first place for instrumentation PGO). This required adjusting a number of tests to distinguish between sample and instrumentation PGO handling, and to add in profile summary metadata so that getProfileCount can get the summary. Reviewers: davidxl, danielcdh Subscribers: aemerson, rengolin, mehdi_amini, Prazek, llvm-commits Differential Revision: https://reviews.llvm.org/D32877 llvm-svn: 302844
2017-05-12 07:18:05 +08:00
; "none2"
Do not want to use BFI to get profile count for sample pgo Summary: For SamplePGO, we already record the callsite count in the call instruction itself. So we do not want to use BFI to get profile count as it is less accurate. Reviewers: tejohnson, davidxl, eraman Reviewed By: eraman Subscribers: sanjoy, llvm-commits, mehdi_amini Differential Revision: https://reviews.llvm.org/D36025 llvm-svn: 309964
2017-08-04 01:11:41 +08:00
; CHECK-NEXT: <FUNCTION op0=39 op1=5
Restrict call metadata based hotness detection to Sample PGO mode Summary: Don't use the metadata on call instructions for determining hotness unless we are in sample PGO mode, where it is needed because profile counts are not accurate. In instrumentation mode this is not necessary and does more harm than good when calls have VP metadata that hasn't been properly scaled after transformations or dropped after constant prop based devirtualization (both should be fixed, but we don't need to do this in the first place for instrumentation PGO). This required adjusting a number of tests to distinguish between sample and instrumentation PGO handling, and to add in profile summary metadata so that getProfileCount can get the summary. Reviewers: davidxl, danielcdh Subscribers: aemerson, rengolin, mehdi_amini, Prazek, llvm-commits Differential Revision: https://reviews.llvm.org/D32877 llvm-svn: 302844
2017-05-12 07:18:05 +08:00
; "none3"
Do not want to use BFI to get profile count for sample pgo Summary: For SamplePGO, we already record the callsite count in the call instruction itself. So we do not want to use BFI to get profile count as it is less accurate. Reviewers: tejohnson, davidxl, eraman Reviewed By: eraman Subscribers: sanjoy, llvm-commits, mehdi_amini Differential Revision: https://reviews.llvm.org/D36025 llvm-svn: 309964
2017-08-04 01:11:41 +08:00
; CHECK-NEXT: <FUNCTION op0=44 op1=5
; CHECK-NEXT: <FUNCTION op0=49 op1=5
Restrict call metadata based hotness detection to Sample PGO mode Summary: Don't use the metadata on call instructions for determining hotness unless we are in sample PGO mode, where it is needed because profile counts are not accurate. In instrumentation mode this is not necessary and does more harm than good when calls have VP metadata that hasn't been properly scaled after transformations or dropped after constant prop based devirtualization (both should be fixed, but we don't need to do this in the first place for instrumentation PGO). This required adjusting a number of tests to distinguish between sample and instrumentation PGO handling, and to add in profile summary metadata so that getProfileCount can get the summary. Reviewers: davidxl, danielcdh Subscribers: aemerson, rengolin, mehdi_amini, Prazek, llvm-commits Differential Revision: https://reviews.llvm.org/D32877 llvm-svn: 302844
2017-05-12 07:18:05 +08:00
; CHECK-LABEL: <GLOBALVAL_SUMMARY_BLOCK
; CHECK-NEXT: <VERSION
Do not want to use BFI to get profile count for sample pgo Summary: For SamplePGO, we already record the callsite count in the call instruction itself. So we do not want to use BFI to get profile count as it is less accurate. Reviewers: tejohnson, davidxl, eraman Reviewed By: eraman Subscribers: sanjoy, llvm-commits, mehdi_amini Differential Revision: https://reviews.llvm.org/D36025 llvm-svn: 309964
2017-08-04 01:11:41 +08:00
; CHECK-NEXT: <VALUE_GUID op0=26 op1=123/>
; op4=none1 op6=hot1 op8=cold1 op10=none2 op12=hot2 op14=cold2 op16=none3 op18=hot3 op20=cold3 op22=123
[ThinLTO] Internalize readonly globals An attempt to recommit r346584 after failure on OSX build bot. Fixed cache key computation in ThinLTOCodeGenerator and added test case llvm-svn: 347033
2018-11-16 15:08:00 +08:00
; CHECK-NEXT: <PERMODULE_PROFILE {{.*}} op6=7 op7=0 op8=1 op9=3 op10=4 op11=1 op12=8 op13=0 op14=2 op15=3 op16=5 op17=1 op18=9 op19=0 op20=3 op21=3 op22=6 op23=1 op24=26 op25=4/>
Restrict call metadata based hotness detection to Sample PGO mode Summary: Don't use the metadata on call instructions for determining hotness unless we are in sample PGO mode, where it is needed because profile counts are not accurate. In instrumentation mode this is not necessary and does more harm than good when calls have VP metadata that hasn't been properly scaled after transformations or dropped after constant prop based devirtualization (both should be fixed, but we don't need to do this in the first place for instrumentation PGO). This required adjusting a number of tests to distinguish between sample and instrumentation PGO handling, and to add in profile summary metadata so that getProfileCount can get the summary. Reviewers: davidxl, danielcdh Subscribers: aemerson, rengolin, mehdi_amini, Prazek, llvm-commits Differential Revision: https://reviews.llvm.org/D32877 llvm-svn: 302844
2017-05-12 07:18:05 +08:00
; CHECK-NEXT: </GLOBALVAL_SUMMARY_BLOCK>
; CHECK: <STRTAB_BLOCK
Do not want to use BFI to get profile count for sample pgo Summary: For SamplePGO, we already record the callsite count in the call instruction itself. So we do not want to use BFI to get profile count as it is less accurate. Reviewers: tejohnson, davidxl, eraman Reviewed By: eraman Subscribers: sanjoy, llvm-commits, mehdi_amini Differential Revision: https://reviews.llvm.org/D36025 llvm-svn: 309964
2017-08-04 01:11:41 +08:00
; CHECK-NEXT: blob data = 'hot_functionhot1hot2hot3cold1cold2cold3none1none2none3{{.*}}'
Restrict call metadata based hotness detection to Sample PGO mode Summary: Don't use the metadata on call instructions for determining hotness unless we are in sample PGO mode, where it is needed because profile counts are not accurate. In instrumentation mode this is not necessary and does more harm than good when calls have VP metadata that hasn't been properly scaled after transformations or dropped after constant prop based devirtualization (both should be fixed, but we don't need to do this in the first place for instrumentation PGO). This required adjusting a number of tests to distinguish between sample and instrumentation PGO handling, and to add in profile summary metadata so that getProfileCount can get the summary. Reviewers: davidxl, danielcdh Subscribers: aemerson, rengolin, mehdi_amini, Prazek, llvm-commits Differential Revision: https://reviews.llvm.org/D32877 llvm-svn: 302844
2017-05-12 07:18:05 +08:00
; COMBINED: <GLOBALVAL_SUMMARY_BLOCK
; COMBINED-NEXT: <VERSION
[ThinLTO] Serialize WithGlobalValueDeadStripping index flag for distributed backends Summary: A recent fix to drop dead symbols (r323633) did not work for ThinLTO distributed backends because we lose the WithGlobalValueDeadStripping set on the index during the thin link. This patch adds a new flags record to the bitcode format for the index, and serializes this flag for the combined index (it would always be 0 for the per-module index generated by the compile step, so no need to serialize the new flags record there until/unless we add another flag that applies to the per-module indexes). Generally this flag should always be set for the distributed backends, which are necessarily performed after the thin link. However, if we were to simply set this flag on the index applied to the distributed backends (invoked via clang), we would lose the ability to disable dead stripping via -compute-dead=false for debugging purposes. Reviewers: grimar, pcc Subscribers: mehdi_amini, inglorion, eraman, llvm-commits Differential Revision: https://reviews.llvm.org/D42799 llvm-svn: 324444
2018-02-07 12:05:59 +08:00
; COMBINED-NEXT: <FLAGS
Restrict call metadata based hotness detection to Sample PGO mode Summary: Don't use the metadata on call instructions for determining hotness unless we are in sample PGO mode, where it is needed because profile counts are not accurate. In instrumentation mode this is not necessary and does more harm than good when calls have VP metadata that hasn't been properly scaled after transformations or dropped after constant prop based devirtualization (both should be fixed, but we don't need to do this in the first place for instrumentation PGO). This required adjusting a number of tests to distinguish between sample and instrumentation PGO handling, and to add in profile summary metadata so that getProfileCount can get the summary. Reviewers: davidxl, danielcdh Subscribers: aemerson, rengolin, mehdi_amini, Prazek, llvm-commits Differential Revision: https://reviews.llvm.org/D32877 llvm-svn: 302844
2017-05-12 07:18:05 +08:00
; COMBINED-NEXT: <VALUE_GUID
; COMBINED-NEXT: <VALUE_GUID
; COMBINED-NEXT: <VALUE_GUID
; COMBINED-NEXT: <VALUE_GUID
; COMBINED-NEXT: <VALUE_GUID
; COMBINED-NEXT: <VALUE_GUID
; COMBINED-NEXT: <VALUE_GUID
; COMBINED-NEXT: <VALUE_GUID
Do not want to use BFI to get profile count for sample pgo Summary: For SamplePGO, we already record the callsite count in the call instruction itself. So we do not want to use BFI to get profile count as it is less accurate. Reviewers: tejohnson, davidxl, eraman Reviewed By: eraman Subscribers: sanjoy, llvm-commits, mehdi_amini Differential Revision: https://reviews.llvm.org/D36025 llvm-svn: 309964
2017-08-04 01:11:41 +08:00
; COMBINED-NEXT: <VALUE_GUID
; COMBINED-NEXT: <VALUE_GUID
; COMBINED-NEXT: <COMBINED abbrevid=
Restrict call metadata based hotness detection to Sample PGO mode Summary: Don't use the metadata on call instructions for determining hotness unless we are in sample PGO mode, where it is needed because profile counts are not accurate. In instrumentation mode this is not necessary and does more harm than good when calls have VP metadata that hasn't been properly scaled after transformations or dropped after constant prop based devirtualization (both should be fixed, but we don't need to do this in the first place for instrumentation PGO). This required adjusting a number of tests to distinguish between sample and instrumentation PGO handling, and to add in profile summary metadata so that getProfileCount can get the summary. Reviewers: davidxl, danielcdh Subscribers: aemerson, rengolin, mehdi_amini, Prazek, llvm-commits Differential Revision: https://reviews.llvm.org/D32877 llvm-svn: 302844
2017-05-12 07:18:05 +08:00
; COMBINED-NEXT: <COMBINED abbrevid=
; COMBINED-NEXT: <COMBINED abbrevid=
; COMBINED-NEXT: <COMBINED abbrevid=
; COMBINED-NEXT: <COMBINED abbrevid=
; COMBINED-NEXT: <COMBINED abbrevid=
; COMBINED-NEXT: <COMBINED abbrevid=
Do not want to use BFI to get profile count for sample pgo Summary: For SamplePGO, we already record the callsite count in the call instruction itself. So we do not want to use BFI to get profile count as it is less accurate. Reviewers: tejohnson, davidxl, eraman Reviewed By: eraman Subscribers: sanjoy, llvm-commits, mehdi_amini Differential Revision: https://reviews.llvm.org/D36025 llvm-svn: 309964
2017-08-04 01:11:41 +08:00
; COMBINED-NEXT: <COMBINED abbrevid=
[ThinLTO] Compute synthetic function entry count Summary: This patch computes the synthetic function entry count on the whole program callgraph (based on module summary) and writes the entry counts to the summary. After function importing, this count gets attached to the IR as metadata. Since it adds a new field to the summary, this bumps up the version. Reviewers: tejohnson Subscribers: mehdi_amini, inglorion, llvm-commits Differential Revision: https://reviews.llvm.org/D43521 llvm-svn: 349076
2018-12-14 03:54:27 +08:00
; COMBINED-NEXT: <COMBINED_PROFILE {{.*}} op8=[[NONE1:.*]] op9=0 op10=[[HOT1:.*]] op11=3 op12=[[COLD1:.*]] op13=1 op14=[[NONE2:.*]] op15=0 op16=[[HOT2:.*]] op17=3 op18=[[COLD2:.*]] op19=1 op20=[[NONE3:.*]] op21=0 op22=[[HOT3:.*]] op23=3 op24=[[COLD3:.*]] op25=1/>
Restrict call metadata based hotness detection to Sample PGO mode Summary: Don't use the metadata on call instructions for determining hotness unless we are in sample PGO mode, where it is needed because profile counts are not accurate. In instrumentation mode this is not necessary and does more harm than good when calls have VP metadata that hasn't been properly scaled after transformations or dropped after constant prop based devirtualization (both should be fixed, but we don't need to do this in the first place for instrumentation PGO). This required adjusting a number of tests to distinguish between sample and instrumentation PGO handling, and to add in profile summary metadata so that getProfileCount can get the summary. Reviewers: davidxl, danielcdh Subscribers: aemerson, rengolin, mehdi_amini, Prazek, llvm-commits Differential Revision: https://reviews.llvm.org/D32877 llvm-svn: 302844
2017-05-12 07:18:05 +08:00
; COMBINED_NEXT: <COMBINED abbrevid=
; COMBINED_NEXT: </GLOBALVAL_SUMMARY_BLOCK>
; ModuleID = 'thinlto-function-summary-callgraph.ll'
target datalayout = "e-m:e-i64:64-f80:128-n8:16:32:64-S128"
target triple = "x86_64-unknown-linux-gnu"
; This function have high profile count, so entry block is hot.
define void @hot_function(i1 %a, i1 %a2) !prof !20 {
entry:
call void @none1()
Do not want to use BFI to get profile count for sample pgo Summary: For SamplePGO, we already record the callsite count in the call instruction itself. So we do not want to use BFI to get profile count as it is less accurate. Reviewers: tejohnson, davidxl, eraman Reviewed By: eraman Subscribers: sanjoy, llvm-commits, mehdi_amini Differential Revision: https://reviews.llvm.org/D36025 llvm-svn: 309964
2017-08-04 01:11:41 +08:00
call void @hot1(), !prof !15
call void @cold1(), !prof !16
br i1 %a, label %Cold, label %Hot, !prof !41
Cold: ; 1/1000 goes here
Restrict call metadata based hotness detection to Sample PGO mode Summary: Don't use the metadata on call instructions for determining hotness unless we are in sample PGO mode, where it is needed because profile counts are not accurate. In instrumentation mode this is not necessary and does more harm than good when calls have VP metadata that hasn't been properly scaled after transformations or dropped after constant prop based devirtualization (both should be fixed, but we don't need to do this in the first place for instrumentation PGO). This required adjusting a number of tests to distinguish between sample and instrumentation PGO handling, and to add in profile summary metadata so that getProfileCount can get the summary. Reviewers: davidxl, danielcdh Subscribers: aemerson, rengolin, mehdi_amini, Prazek, llvm-commits Differential Revision: https://reviews.llvm.org/D32877 llvm-svn: 302844
2017-05-12 07:18:05 +08:00
call void @none2()
Do not want to use BFI to get profile count for sample pgo Summary: For SamplePGO, we already record the callsite count in the call instruction itself. So we do not want to use BFI to get profile count as it is less accurate. Reviewers: tejohnson, davidxl, eraman Reviewed By: eraman Subscribers: sanjoy, llvm-commits, mehdi_amini Differential Revision: https://reviews.llvm.org/D36025 llvm-svn: 309964
2017-08-04 01:11:41 +08:00
call void @hot2(), !prof !15
call void @cold2(), !prof !16
Restrict call metadata based hotness detection to Sample PGO mode Summary: Don't use the metadata on call instructions for determining hotness unless we are in sample PGO mode, where it is needed because profile counts are not accurate. In instrumentation mode this is not necessary and does more harm than good when calls have VP metadata that hasn't been properly scaled after transformations or dropped after constant prop based devirtualization (both should be fixed, but we don't need to do this in the first place for instrumentation PGO). This required adjusting a number of tests to distinguish between sample and instrumentation PGO handling, and to add in profile summary metadata so that getProfileCount can get the summary. Reviewers: davidxl, danielcdh Subscribers: aemerson, rengolin, mehdi_amini, Prazek, llvm-commits Differential Revision: https://reviews.llvm.org/D32877 llvm-svn: 302844
2017-05-12 07:18:05 +08:00
br label %exit
Do not want to use BFI to get profile count for sample pgo Summary: For SamplePGO, we already record the callsite count in the call instruction itself. So we do not want to use BFI to get profile count as it is less accurate. Reviewers: tejohnson, davidxl, eraman Reviewed By: eraman Subscribers: sanjoy, llvm-commits, mehdi_amini Differential Revision: https://reviews.llvm.org/D36025 llvm-svn: 309964
2017-08-04 01:11:41 +08:00
Hot: ; 999/1000 goes here
Restrict call metadata based hotness detection to Sample PGO mode Summary: Don't use the metadata on call instructions for determining hotness unless we are in sample PGO mode, where it is needed because profile counts are not accurate. In instrumentation mode this is not necessary and does more harm than good when calls have VP metadata that hasn't been properly scaled after transformations or dropped after constant prop based devirtualization (both should be fixed, but we don't need to do this in the first place for instrumentation PGO). This required adjusting a number of tests to distinguish between sample and instrumentation PGO handling, and to add in profile summary metadata so that getProfileCount can get the summary. Reviewers: davidxl, danielcdh Subscribers: aemerson, rengolin, mehdi_amini, Prazek, llvm-commits Differential Revision: https://reviews.llvm.org/D32877 llvm-svn: 302844
2017-05-12 07:18:05 +08:00
call void @none3()
Do not want to use BFI to get profile count for sample pgo Summary: For SamplePGO, we already record the callsite count in the call instruction itself. So we do not want to use BFI to get profile count as it is less accurate. Reviewers: tejohnson, davidxl, eraman Reviewed By: eraman Subscribers: sanjoy, llvm-commits, mehdi_amini Differential Revision: https://reviews.llvm.org/D36025 llvm-svn: 309964
2017-08-04 01:11:41 +08:00
call void @hot3(), !prof !15
call void @cold3(), !prof !16
Restrict call metadata based hotness detection to Sample PGO mode Summary: Don't use the metadata on call instructions for determining hotness unless we are in sample PGO mode, where it is needed because profile counts are not accurate. In instrumentation mode this is not necessary and does more harm than good when calls have VP metadata that hasn't been properly scaled after transformations or dropped after constant prop based devirtualization (both should be fixed, but we don't need to do this in the first place for instrumentation PGO). This required adjusting a number of tests to distinguish between sample and instrumentation PGO handling, and to add in profile summary metadata so that getProfileCount can get the summary. Reviewers: davidxl, danielcdh Subscribers: aemerson, rengolin, mehdi_amini, Prazek, llvm-commits Differential Revision: https://reviews.llvm.org/D32877 llvm-svn: 302844
2017-05-12 07:18:05 +08:00
br label %exit
exit:
ret void
}
declare void @hot1() #1
declare void @hot2() #1
declare void @hot3() #1
Do not want to use BFI to get profile count for sample pgo Summary: For SamplePGO, we already record the callsite count in the call instruction itself. So we do not want to use BFI to get profile count as it is less accurate. Reviewers: tejohnson, davidxl, eraman Reviewed By: eraman Subscribers: sanjoy, llvm-commits, mehdi_amini Differential Revision: https://reviews.llvm.org/D36025 llvm-svn: 309964
2017-08-04 01:11:41 +08:00
declare void @cold1() #1
declare void @cold2() #1
declare void @cold3() #1
Restrict call metadata based hotness detection to Sample PGO mode Summary: Don't use the metadata on call instructions for determining hotness unless we are in sample PGO mode, where it is needed because profile counts are not accurate. In instrumentation mode this is not necessary and does more harm than good when calls have VP metadata that hasn't been properly scaled after transformations or dropped after constant prop based devirtualization (both should be fixed, but we don't need to do this in the first place for instrumentation PGO). This required adjusting a number of tests to distinguish between sample and instrumentation PGO handling, and to add in profile summary metadata so that getProfileCount can get the summary. Reviewers: davidxl, danielcdh Subscribers: aemerson, rengolin, mehdi_amini, Prazek, llvm-commits Differential Revision: https://reviews.llvm.org/D32877 llvm-svn: 302844
2017-05-12 07:18:05 +08:00
declare void @none1() #1
declare void @none2() #1
declare void @none3() #1
!41 = !{!"branch_weights", i32 1, i32 1000}
!llvm.module.flags = !{!1}
!20 = !{!"function_entry_count", i64 110, i64 123}
!1 = !{i32 1, !"ProfileSummary", !2}
!2 = !{!3, !4, !5, !6, !7, !8, !9, !10}
!3 = !{!"ProfileFormat", !"SampleProfile"}
!4 = !{!"TotalCount", i64 10000}
!5 = !{!"MaxCount", i64 10}
!6 = !{!"MaxInternalCount", i64 1}
!7 = !{!"MaxFunctionCount", i64 1000}
!8 = !{!"NumCounts", i64 3}
!9 = !{!"NumFunctions", i64 3}
!10 = !{!"DetailedSummary", !11}
!11 = !{!12, !13, !14}
!12 = !{i32 10000, i64 100, i32 1}
!13 = !{i32 999000, i64 100, i32 1}
!14 = !{i32 999999, i64 1, i32 2}
!15 = !{!"branch_weights", i32 100}
Do not want to use BFI to get profile count for sample pgo Summary: For SamplePGO, we already record the callsite count in the call instruction itself. So we do not want to use BFI to get profile count as it is less accurate. Reviewers: tejohnson, davidxl, eraman Reviewed By: eraman Subscribers: sanjoy, llvm-commits, mehdi_amini Differential Revision: https://reviews.llvm.org/D36025 llvm-svn: 309964
2017-08-04 01:11:41 +08:00
!16 = !{!"branch_weights", i32 1}