llvm-project/clang/test/Parser/pragma-loop.cpp

284 lines
13 KiB
C++
Raw Normal View History

// RUN: %clang_cc1 -std=c++11 -verify %s
// Note that this puts the expected lines before the directives to work around
// limitations in the -verify mode.
template <int V, int I>
void test_nontype_template_param(int *List, int Length) {
#pragma clang loop vectorize_width(V) interleave_count(I)
for (int i = 0; i < Length; i++) {
List[i] = i;
}
#pragma clang loop vectorize_width(V + 4) interleave_count(I + 4)
for (int i = 0; i < Length; i++) {
List[i] = i;
}
}
template <int V>
void test_nontype_template_vectorize(int *List, int Length) {
/* expected-error {{invalid value '-1'; must be positive}} */ #pragma clang loop vectorize_width(V)
for (int i = 0; i < Length; i++) {
List[i] = i;
}
/* expected-error {{invalid value '0'; must be positive}} */ #pragma clang loop vectorize_width(V / 2)
for (int i = 0; i < Length; i++) {
List[i] += i;
}
}
template <int I>
void test_nontype_template_interleave(int *List, int Length) {
/* expected-error {{invalid value '-1'; must be positive}} */ #pragma clang loop interleave_count(I)
for (int i = 0; i < Length; i++) {
List[i] = i;
}
/* expected-error {{invalid value '0'; must be positive}} */ #pragma clang loop interleave_count(2 % I)
for (int i = 0; i < Length; i++) {
List[i] = i;
}
}
template <char V>
void test_nontype_template_char(int *List, int Length) {
/* expected-error {{invalid argument of type 'char'; expected an integer type}} */ #pragma clang loop vectorize_width(V)
for (int i = 0; i < Length; i++) {
List[i] = i;
}
}
template <bool V>
void test_nontype_template_bool(int *List, int Length) {
/* expected-error {{invalid argument of type 'bool'; expected an integer type}} */ #pragma clang loop vectorize_width(V)
for (int i = 0; i < Length; i++) {
List[i] = i;
}
}
template <int V, int I>
void test_nontype_template_badarg(int *List, int Length) {
/* expected-error {{use of undeclared identifier 'Vec'}} */ #pragma clang loop vectorize_width(Vec) interleave_count(I)
/* expected-error {{use of undeclared identifier 'Int'}} */ #pragma clang loop vectorize_width(V) interleave_count(Int)
for (int i = 0; i < Length; i++) {
List[i] = i;
}
}
template <typename T>
void test_type_template_vectorize(int *List, int Length) {
const T Value = -1;
/* expected-error {{invalid value '-1'; must be positive}} */ #pragma clang loop vectorize_width(Value)
for (int i = 0; i < Length; i++) {
List[i] = i;
}
}
void test(int *List, int Length) {
int i = 0;
#pragma clang loop vectorize(enable)
#pragma clang loop interleave(enable)
#pragma clang loop unroll(full)
while (i + 1 < Length) {
List[i] = i;
}
#pragma clang loop vectorize_width(4)
#pragma clang loop interleave_count(8)
#pragma clang loop unroll_count(16)
while (i < Length) {
List[i] = i;
}
#pragma clang loop vectorize(disable)
#pragma clang loop interleave(disable)
#pragma clang loop unroll(disable)
while (i - 1 < Length) {
List[i] = i;
}
#pragma clang loop vectorize_width(4) interleave_count(8) unroll_count(16)
while (i - 2 < Length) {
List[i] = i;
}
#pragma clang loop interleave_count(16)
while (i - 3 < Length) {
List[i] = i;
}
int VList[Length];
#pragma clang loop vectorize(disable) interleave(disable) unroll(disable)
for (int j : VList) {
VList[j] = List[j];
}
#pragma clang loop distribute(enable)
for (int j : VList) {
VList[j] = List[j];
}
#pragma clang loop distribute(disable)
for (int j : VList) {
VList[j] = List[j];
}
test_nontype_template_param<4, 8>(List, Length);
/* expected-error {{expected '('}} */ #pragma clang loop vectorize
/* expected-error {{expected '('}} */ #pragma clang loop interleave
/* expected-error {{expected '('}} */ #pragma clang loop unroll
/* expected-error {{expected '('}} */ #pragma clang loop distribute
/* expected-error {{expected ')'}} */ #pragma clang loop vectorize(enable
/* expected-error {{expected ')'}} */ #pragma clang loop interleave(enable
/* expected-error {{expected ')'}} */ #pragma clang loop unroll(full
/* expected-error {{expected ')'}} */ #pragma clang loop distribute(enable
/* expected-error {{expected ')'}} */ #pragma clang loop vectorize_width(4
/* expected-error {{expected ')'}} */ #pragma clang loop interleave_count(4
/* expected-error {{expected ')'}} */ #pragma clang loop unroll_count(4
/* expected-error {{missing argument; expected 'enable', 'assume_safety' or 'disable'}} */ #pragma clang loop vectorize()
/* expected-error {{missing argument; expected an integer value}} */ #pragma clang loop interleave_count()
/* expected-error {{missing argument; expected 'enable', 'full' or 'disable'}} */ #pragma clang loop unroll()
/* expected-error {{missing argument; expected 'enable' or 'disable'}} */ #pragma clang loop distribute()
/* expected-error {{missing option; expected vectorize, vectorize_width, interleave, interleave_count, unroll, unroll_count, pipeline, pipeline_initiation_interval, or distribute}} */ #pragma clang loop
/* expected-error {{invalid option 'badkeyword'}} */ #pragma clang loop badkeyword
/* expected-error {{invalid option 'badkeyword'}} */ #pragma clang loop badkeyword(enable)
/* expected-error {{invalid option 'badkeyword'}} */ #pragma clang loop vectorize(enable) badkeyword(4)
/* expected-warning {{extra tokens at end of '#pragma clang loop'}} */ #pragma clang loop vectorize(enable) ,
while (i-4 < Length) {
List[i] = i;
}
/* expected-error {{invalid value '0'; must be positive}} */ #pragma clang loop vectorize_width(0)
/* expected-error {{invalid value '0'; must be positive}} */ #pragma clang loop interleave_count(0)
/* expected-error {{invalid value '0'; must be positive}} */ #pragma clang loop unroll_count(0)
/* expected-error {{expression is not an integral constant expression}} expected-note {{division by zero}} */ #pragma clang loop vectorize_width(10 / 0)
/* expected-error {{invalid value '0'; must be positive}} */ #pragma clang loop interleave_count(10 / 5 - 2)
while (i-5 < Length) {
List[i] = i;
}
test_nontype_template_vectorize<4>(List, Length);
/* expected-note {{in instantiation of function template specialization}} */ test_nontype_template_vectorize<-1>(List, Length);
test_nontype_template_interleave<8>(List, Length);
/* expected-note {{in instantiation of function template specialization}} */ test_nontype_template_interleave<-1>(List, Length);
/* expected-note {{in instantiation of function template specialization}} */ test_nontype_template_char<'A'>(List, Length); // Loop hint arg cannot be a char.
/* expected-note {{in instantiation of function template specialization}} */ test_nontype_template_bool<true>(List, Length); // Or a bool.
/* expected-note {{in instantiation of function template specialization}} */ test_type_template_vectorize<int>(List, Length); // Or a template type.
/* expected-error {{value '3000000000' is too large}} */ #pragma clang loop vectorize_width(3000000000)
/* expected-error {{value '3000000000' is too large}} */ #pragma clang loop interleave_count(3000000000)
/* expected-error {{value '3000000000' is too large}} */ #pragma clang loop unroll_count(3000000000)
while (i-6 < Length) {
List[i] = i;
}
/* expected-warning {{extra tokens at end of '#pragma clang loop'}} */ #pragma clang loop vectorize_width(1 +) 1
/* expected-warning {{extra tokens at end of '#pragma clang loop'}} */ #pragma clang loop vectorize_width(1) +1
const int VV = 4;
/* expected-error {{expected expression}} */ #pragma clang loop vectorize_width(VV +/ 2)
/* expected-error {{use of undeclared identifier 'undefined'}} */ #pragma clang loop vectorize_width(VV+undefined)
/* expected-error {{expected ')'}} */ #pragma clang loop vectorize_width(1+(^*/2 * ()
/* expected-warning {{extra tokens at end of '#pragma clang loop' - ignored}} */ #pragma clang loop vectorize_width(1+(-0[0]))))))
/* expected-error {{use of undeclared identifier 'badvalue'}} */ #pragma clang loop vectorize_width(badvalue)
/* expected-error {{use of undeclared identifier 'badvalue'}} */ #pragma clang loop interleave_count(badvalue)
/* expected-error {{use of undeclared identifier 'badvalue'}} */ #pragma clang loop unroll_count(badvalue)
while (i-6 < Length) {
List[i] = i;
}
/* expected-error {{invalid argument; expected 'enable', 'assume_safety' or 'disable'}} */ #pragma clang loop vectorize(badidentifier)
/* expected-error {{invalid argument; expected 'enable', 'assume_safety' or 'disable'}} */ #pragma clang loop interleave(badidentifier)
/* expected-error {{invalid argument; expected 'enable', 'full' or 'disable'}} */ #pragma clang loop unroll(badidentifier)
/* expected-error {{invalid argument; expected 'enable' or 'disable'}} */ #pragma clang loop distribute(badidentifier)
while (i-7 < Length) {
List[i] = i;
}
// PR20069 - Loop pragma arguments that are not identifiers or numeric
// constants crash FE.
/* expected-error {{expected ')'}} */ #pragma clang loop vectorize(()
/* expected-error {{invalid argument; expected 'enable', 'assume_safety' or 'disable'}} */ #pragma clang loop interleave(*)
/* expected-error {{invalid argument; expected 'enable', 'full' or 'disable'}} */ #pragma clang loop unroll(=)
/* expected-error {{invalid argument; expected 'enable' or 'disable'}} */ #pragma clang loop distribute(+)
/* expected-error {{type name requires a specifier or qualifier}} expected-error {{expected expression}} */ #pragma clang loop vectorize_width(^)
/* expected-error {{expected expression}} expected-error {{expected expression}} */ #pragma clang loop interleave_count(/)
/* expected-error {{expected expression}} expected-error {{expected expression}} */ #pragma clang loop unroll_count(==)
while (i-8 < Length) {
List[i] = i;
}
#pragma clang loop vectorize(enable)
/* expected-error {{expected a for, while, or do-while loop to follow '#pragma clang loop'}} */ int j = Length;
List[0] = List[1];
while (j-1 < Length) {
List[j] = j;
}
// FIXME: A bug in ParsedAttributes causes the order of the attributes to be
// processed in reverse. Consequently, the errors occur on the first of pragma
// of the next three tests rather than the last, and the order of the kinds
// is also reversed.
Append new attributes to the end of an AttributeList. Recommit of r335084 after revert in r335516. ... instead of prepending it at the beginning (the original behavior since implemented in r122535 2010-12-23). This builds up an AttributeList in the the order in which the attributes appear in the source. The reverse order caused nodes for attributes in the AST (e.g. LoopHint) to be in the reverse order, and therefore printed in the wrong order in -ast-dump. Some TODO comments mention this. The order was explicitly reversed for enable_if attribute overload resolution and name mangling, which is not necessary anymore with this patch. The change unfortunately has some secondary effect, especially on diagnostic output. In the simplest cases, the CHECK lines or expected diagnostic were changed to the the new output. If the kind of error/warning changed, the attributes' order was changed instead. This unfortunately causes some 'previous occurrence here' hints to be textually after the main marker. This typically happens when attributes are merged, but are incompatible to each other. Interchanging the role of the the main and note SourceLocation will also cause the case where two different declaration's attributes (in contrast to multiple attributes of the same declaration) are merged to be reverse. There is no easy fix because sometimes previous attributes are merged into a new declaration's attribute list, sometimes new attributes are added to a previous declaration's attribute list. Since 'previous occurrence here' pointing to locations after the main marker is not rare, I left the markers as-is; it is only relevant when the attributes are declared in the same declaration anyway. Differential Revision: https://reviews.llvm.org/D48100 llvm-svn: 338800
2018-08-03 09:21:16 +08:00
#pragma clang loop vectorize_width(4)
/* expected-error {{incompatible directives 'vectorize(disable)' and 'vectorize_width(4)'}} */ #pragma clang loop vectorize(disable)
#pragma clang loop interleave_count(4)
/* expected-error {{incompatible directives 'interleave(disable)' and 'interleave_count(4)'}} */ #pragma clang loop interleave(disable)
#pragma clang loop unroll_count(4)
/* expected-error {{incompatible directives 'unroll(disable)' and 'unroll_count(4)'}} */ #pragma clang loop unroll(disable)
while (i-8 < Length) {
List[i] = i;
}
Append new attributes to the end of an AttributeList. Recommit of r335084 after revert in r335516. ... instead of prepending it at the beginning (the original behavior since implemented in r122535 2010-12-23). This builds up an AttributeList in the the order in which the attributes appear in the source. The reverse order caused nodes for attributes in the AST (e.g. LoopHint) to be in the reverse order, and therefore printed in the wrong order in -ast-dump. Some TODO comments mention this. The order was explicitly reversed for enable_if attribute overload resolution and name mangling, which is not necessary anymore with this patch. The change unfortunately has some secondary effect, especially on diagnostic output. In the simplest cases, the CHECK lines or expected diagnostic were changed to the the new output. If the kind of error/warning changed, the attributes' order was changed instead. This unfortunately causes some 'previous occurrence here' hints to be textually after the main marker. This typically happens when attributes are merged, but are incompatible to each other. Interchanging the role of the the main and note SourceLocation will also cause the case where two different declaration's attributes (in contrast to multiple attributes of the same declaration) are merged to be reverse. There is no easy fix because sometimes previous attributes are merged into a new declaration's attribute list, sometimes new attributes are added to a previous declaration's attribute list. Since 'previous occurrence here' pointing to locations after the main marker is not rare, I left the markers as-is; it is only relevant when the attributes are declared in the same declaration anyway. Differential Revision: https://reviews.llvm.org/D48100 llvm-svn: 338800
2018-08-03 09:21:16 +08:00
#pragma clang loop vectorize(enable)
/* expected-error {{duplicate directives 'vectorize(enable)' and 'vectorize(disable)'}} */ #pragma clang loop vectorize(disable)
#pragma clang loop interleave(enable)
/* expected-error {{duplicate directives 'interleave(enable)' and 'interleave(disable)'}} */ #pragma clang loop interleave(disable)
#pragma clang loop unroll(full)
/* expected-error {{duplicate directives 'unroll(full)' and 'unroll(disable)'}} */ #pragma clang loop unroll(disable)
#pragma clang loop distribute(enable)
/* expected-error {{duplicate directives 'distribute(enable)' and 'distribute(disable)'}} */ #pragma clang loop distribute(disable)
while (i-9 < Length) {
List[i] = i;
}
Append new attributes to the end of an AttributeList. Recommit of r335084 after revert in r335516. ... instead of prepending it at the beginning (the original behavior since implemented in r122535 2010-12-23). This builds up an AttributeList in the the order in which the attributes appear in the source. The reverse order caused nodes for attributes in the AST (e.g. LoopHint) to be in the reverse order, and therefore printed in the wrong order in -ast-dump. Some TODO comments mention this. The order was explicitly reversed for enable_if attribute overload resolution and name mangling, which is not necessary anymore with this patch. The change unfortunately has some secondary effect, especially on diagnostic output. In the simplest cases, the CHECK lines or expected diagnostic were changed to the the new output. If the kind of error/warning changed, the attributes' order was changed instead. This unfortunately causes some 'previous occurrence here' hints to be textually after the main marker. This typically happens when attributes are merged, but are incompatible to each other. Interchanging the role of the the main and note SourceLocation will also cause the case where two different declaration's attributes (in contrast to multiple attributes of the same declaration) are merged to be reverse. There is no easy fix because sometimes previous attributes are merged into a new declaration's attribute list, sometimes new attributes are added to a previous declaration's attribute list. Since 'previous occurrence here' pointing to locations after the main marker is not rare, I left the markers as-is; it is only relevant when the attributes are declared in the same declaration anyway. Differential Revision: https://reviews.llvm.org/D48100 llvm-svn: 338800
2018-08-03 09:21:16 +08:00
#pragma clang loop vectorize(disable)
/* expected-error {{incompatible directives 'vectorize(disable)' and 'vectorize_width(4)'}} */ #pragma clang loop vectorize_width(4)
#pragma clang loop interleave(disable)
/* expected-error {{incompatible directives 'interleave(disable)' and 'interleave_count(4)'}} */ #pragma clang loop interleave_count(4)
#pragma clang loop unroll(disable)
/* expected-error {{incompatible directives 'unroll(disable)' and 'unroll_count(4)'}} */ #pragma clang loop unroll_count(4)
while (i-10 < Length) {
List[i] = i;
}
Append new attributes to the end of an AttributeList. Recommit of r335084 after revert in r335516. ... instead of prepending it at the beginning (the original behavior since implemented in r122535 2010-12-23). This builds up an AttributeList in the the order in which the attributes appear in the source. The reverse order caused nodes for attributes in the AST (e.g. LoopHint) to be in the reverse order, and therefore printed in the wrong order in -ast-dump. Some TODO comments mention this. The order was explicitly reversed for enable_if attribute overload resolution and name mangling, which is not necessary anymore with this patch. The change unfortunately has some secondary effect, especially on diagnostic output. In the simplest cases, the CHECK lines or expected diagnostic were changed to the the new output. If the kind of error/warning changed, the attributes' order was changed instead. This unfortunately causes some 'previous occurrence here' hints to be textually after the main marker. This typically happens when attributes are merged, but are incompatible to each other. Interchanging the role of the the main and note SourceLocation will also cause the case where two different declaration's attributes (in contrast to multiple attributes of the same declaration) are merged to be reverse. There is no easy fix because sometimes previous attributes are merged into a new declaration's attribute list, sometimes new attributes are added to a previous declaration's attribute list. Since 'previous occurrence here' pointing to locations after the main marker is not rare, I left the markers as-is; it is only relevant when the attributes are declared in the same declaration anyway. Differential Revision: https://reviews.llvm.org/D48100 llvm-svn: 338800
2018-08-03 09:21:16 +08:00
#pragma clang loop vectorize_width(8)
/* expected-error {{duplicate directives 'vectorize_width(8)' and 'vectorize_width(4)'}} */ #pragma clang loop vectorize_width(4)
#pragma clang loop interleave_count(8)
/* expected-error {{duplicate directives 'interleave_count(8)' and 'interleave_count(4)'}} */ #pragma clang loop interleave_count(4)
#pragma clang loop unroll_count(8)
/* expected-error {{duplicate directives 'unroll_count(8)' and 'unroll_count(4)'}} */ #pragma clang loop unroll_count(4)
while (i-11 < Length) {
List[i] = i;
}
Append new attributes to the end of an AttributeList. Recommit of r335084 after revert in r335516. ... instead of prepending it at the beginning (the original behavior since implemented in r122535 2010-12-23). This builds up an AttributeList in the the order in which the attributes appear in the source. The reverse order caused nodes for attributes in the AST (e.g. LoopHint) to be in the reverse order, and therefore printed in the wrong order in -ast-dump. Some TODO comments mention this. The order was explicitly reversed for enable_if attribute overload resolution and name mangling, which is not necessary anymore with this patch. The change unfortunately has some secondary effect, especially on diagnostic output. In the simplest cases, the CHECK lines or expected diagnostic were changed to the the new output. If the kind of error/warning changed, the attributes' order was changed instead. This unfortunately causes some 'previous occurrence here' hints to be textually after the main marker. This typically happens when attributes are merged, but are incompatible to each other. Interchanging the role of the the main and note SourceLocation will also cause the case where two different declaration's attributes (in contrast to multiple attributes of the same declaration) are merged to be reverse. There is no easy fix because sometimes previous attributes are merged into a new declaration's attribute list, sometimes new attributes are added to a previous declaration's attribute list. Since 'previous occurrence here' pointing to locations after the main marker is not rare, I left the markers as-is; it is only relevant when the attributes are declared in the same declaration anyway. Differential Revision: https://reviews.llvm.org/D48100 llvm-svn: 338800
2018-08-03 09:21:16 +08:00
#pragma clang loop unroll(full)
/* expected-error {{incompatible directives 'unroll(full)' and 'unroll_count(4)'}} */ #pragma clang loop unroll_count(4)
while (i-11 < Length) {
List[i] = i;
}
#pragma clang loop interleave(enable)
/* expected-error {{expected statement}} */ }