llvm-project/lld/ELF/Target.cpp

182 lines
5.5 KiB
C++
Raw Normal View History

//===- Target.cpp ---------------------------------------------------------===//
//
// Part of the LLVM Project, under the Apache License v2.0 with LLVM Exceptions.
// See https://llvm.org/LICENSE.txt for license information.
// SPDX-License-Identifier: Apache-2.0 WITH LLVM-exception
//
//===----------------------------------------------------------------------===//
2015-10-14 03:51:57 +08:00
//
// Machine-specific things, such as applying relocations, creation of
// GOT or PLT entries, etc., are handled in this file.
//
2016-08-25 00:36:41 +08:00
// Refer the ELF spec for the single letter variables, S, A or P, used
// in this file.
2015-10-14 03:51:57 +08:00
//
// Some functions defined in this file has "relaxTls" as part of their names.
// They do peephole optimization for TLS variables by rewriting instructions.
// They are not part of the ABI but optional optimization, so you can skip
// them if you are not interested in how TLS variables are optimized.
// See the following paper for the details.
//
// Ulrich Drepper, ELF Handling For Thread-Local Storage
// http://www.akkadia.org/drepper/tls.pdf
//
2015-10-14 03:51:57 +08:00
//===----------------------------------------------------------------------===//
#include "Target.h"
[ELF] Implement infrastructure for thunk code creation Some targets might require creation of thunks. For example, MIPS targets require stubs to call PIC code from non-PIC one. The patch implements infrastructure for thunk code creation and provides support for MIPS LA25 stubs. Any MIPS PIC code function is invoked with its address in register $t9. So if we have a branch instruction from non-PIC code to the PIC one we cannot make the jump directly and need to create a small stub to save the target function address. See page 3-38 ftp://www.linux-mips.org/pub/linux/mips/doc/ABI/mipsabi.pdf - In relocation scanning phase we ask target about thunk creation necessity by calling `TagetInfo::needsThunk` method. The `InputSection` class maintains list of Symbols requires thunk creation. - Reassigning offsets performed for each input sections after relocation scanning complete because position of each section might change due thunk creation. - The patch introduces new dedicated value for DefinedSynthetic symbols DefinedSynthetic::SectionEnd. Synthetic symbol with that value always points to the end of the corresponding output section. That allows to escape updating synthetic symbols if output sections sizes changes after relocation scanning due thunk creation. - In the `InputSection::writeTo` method we write thunks after corresponding input section. Each thunk is written by calling `TargetInfo::writeThunk` method. - The patch supports the only type of thunk code for each target. For now, it is enough. Differential Revision: http://reviews.llvm.org/D17934 llvm-svn: 265059
2016-04-01 05:26:23 +08:00
#include "InputFiles.h"
#include "OutputSections.h"
#include "SymbolTable.h"
#include "Symbols.h"
#include "lld/Common/ErrorHandler.h"
#include "llvm/Object/ELF.h"
using namespace llvm;
using namespace llvm::object;
using namespace llvm::ELF;
using namespace lld;
using namespace lld::elf;
[Coding style change] Rename variables so that they start with a lowercase letter This patch is mechanically generated by clang-llvm-rename tool that I wrote using Clang Refactoring Engine just for creating this patch. You can see the source code of the tool at https://reviews.llvm.org/D64123. There's no manual post-processing; you can generate the same patch by re-running the tool against lld's code base. Here is the main discussion thread to change the LLVM coding style: https://lists.llvm.org/pipermail/llvm-dev/2019-February/130083.html In the discussion thread, I proposed we use lld as a testbed for variable naming scheme change, and this patch does that. I chose to rename variables so that they are in camelCase, just because that is a minimal change to make variables to start with a lowercase letter. Note to downstream patch maintainers: if you are maintaining a downstream lld repo, just rebasing ahead of this commit would cause massive merge conflicts because this patch essentially changes every line in the lld subdirectory. But there's a remedy. clang-llvm-rename tool is a batch tool, so you can rename variables in your downstream repo with the tool. Given that, here is how to rebase your repo to a commit after the mass renaming: 1. rebase to the commit just before the mass variable renaming, 2. apply the tool to your downstream repo to mass-rename variables locally, and 3. rebase again to the head. Most changes made by the tool should be identical for a downstream repo and for the head, so at the step 3, almost all changes should be merged and disappear. I'd expect that there would be some lines that you need to merge by hand, but that shouldn't be too many. Differential Revision: https://reviews.llvm.org/D64121 llvm-svn: 365595
2019-07-10 13:00:37 +08:00
const TargetInfo *elf::target;
[Coding style change] Rename variables so that they start with a lowercase letter This patch is mechanically generated by clang-llvm-rename tool that I wrote using Clang Refactoring Engine just for creating this patch. You can see the source code of the tool at https://reviews.llvm.org/D64123. There's no manual post-processing; you can generate the same patch by re-running the tool against lld's code base. Here is the main discussion thread to change the LLVM coding style: https://lists.llvm.org/pipermail/llvm-dev/2019-February/130083.html In the discussion thread, I proposed we use lld as a testbed for variable naming scheme change, and this patch does that. I chose to rename variables so that they are in camelCase, just because that is a minimal change to make variables to start with a lowercase letter. Note to downstream patch maintainers: if you are maintaining a downstream lld repo, just rebasing ahead of this commit would cause massive merge conflicts because this patch essentially changes every line in the lld subdirectory. But there's a remedy. clang-llvm-rename tool is a batch tool, so you can rename variables in your downstream repo with the tool. Given that, here is how to rebase your repo to a commit after the mass renaming: 1. rebase to the commit just before the mass variable renaming, 2. apply the tool to your downstream repo to mass-rename variables locally, and 3. rebase again to the head. Most changes made by the tool should be identical for a downstream repo and for the head, so at the step 3, almost all changes should be merged and disappear. I'd expect that there would be some lines that you need to merge by hand, but that shouldn't be too many. Differential Revision: https://reviews.llvm.org/D64121 llvm-svn: 365595
2019-07-10 13:00:37 +08:00
std::string lld::toString(RelType type) {
StringRef s = getELFRelocationTypeName(elf::config->emachine, type);
if (s == "Unknown")
return ("Unknown (" + Twine(type) + ")").str();
return s;
}
TargetInfo *elf::getTarget() {
[Coding style change] Rename variables so that they start with a lowercase letter This patch is mechanically generated by clang-llvm-rename tool that I wrote using Clang Refactoring Engine just for creating this patch. You can see the source code of the tool at https://reviews.llvm.org/D64123. There's no manual post-processing; you can generate the same patch by re-running the tool against lld's code base. Here is the main discussion thread to change the LLVM coding style: https://lists.llvm.org/pipermail/llvm-dev/2019-February/130083.html In the discussion thread, I proposed we use lld as a testbed for variable naming scheme change, and this patch does that. I chose to rename variables so that they are in camelCase, just because that is a minimal change to make variables to start with a lowercase letter. Note to downstream patch maintainers: if you are maintaining a downstream lld repo, just rebasing ahead of this commit would cause massive merge conflicts because this patch essentially changes every line in the lld subdirectory. But there's a remedy. clang-llvm-rename tool is a batch tool, so you can rename variables in your downstream repo with the tool. Given that, here is how to rebase your repo to a commit after the mass renaming: 1. rebase to the commit just before the mass variable renaming, 2. apply the tool to your downstream repo to mass-rename variables locally, and 3. rebase again to the head. Most changes made by the tool should be identical for a downstream repo and for the head, so at the step 3, almost all changes should be merged and disappear. I'd expect that there would be some lines that you need to merge by hand, but that shouldn't be too many. Differential Revision: https://reviews.llvm.org/D64121 llvm-svn: 365595
2019-07-10 13:00:37 +08:00
switch (config->emachine) {
case EM_386:
case EM_IAMCU:
return getX86TargetInfo();
case EM_AARCH64:
return getAArch64TargetInfo();
case EM_AMDGPU:
return getAMDGPUTargetInfo();
case EM_ARM:
return getARMTargetInfo();
case EM_AVR:
return getAVRTargetInfo();
case EM_HEXAGON:
return getHexagonTargetInfo();
case EM_MIPS:
[Coding style change] Rename variables so that they start with a lowercase letter This patch is mechanically generated by clang-llvm-rename tool that I wrote using Clang Refactoring Engine just for creating this patch. You can see the source code of the tool at https://reviews.llvm.org/D64123. There's no manual post-processing; you can generate the same patch by re-running the tool against lld's code base. Here is the main discussion thread to change the LLVM coding style: https://lists.llvm.org/pipermail/llvm-dev/2019-February/130083.html In the discussion thread, I proposed we use lld as a testbed for variable naming scheme change, and this patch does that. I chose to rename variables so that they are in camelCase, just because that is a minimal change to make variables to start with a lowercase letter. Note to downstream patch maintainers: if you are maintaining a downstream lld repo, just rebasing ahead of this commit would cause massive merge conflicts because this patch essentially changes every line in the lld subdirectory. But there's a remedy. clang-llvm-rename tool is a batch tool, so you can rename variables in your downstream repo with the tool. Given that, here is how to rebase your repo to a commit after the mass renaming: 1. rebase to the commit just before the mass variable renaming, 2. apply the tool to your downstream repo to mass-rename variables locally, and 3. rebase again to the head. Most changes made by the tool should be identical for a downstream repo and for the head, so at the step 3, almost all changes should be merged and disappear. I'd expect that there would be some lines that you need to merge by hand, but that shouldn't be too many. Differential Revision: https://reviews.llvm.org/D64121 llvm-svn: 365595
2019-07-10 13:00:37 +08:00
switch (config->ekind) {
case ELF32LEKind:
return getMipsTargetInfo<ELF32LE>();
case ELF32BEKind:
return getMipsTargetInfo<ELF32BE>();
case ELF64LEKind:
return getMipsTargetInfo<ELF64LE>();
case ELF64BEKind:
return getMipsTargetInfo<ELF64BE>();
default:
llvm_unreachable("unsupported MIPS target");
}
case EM_MSP430:
return getMSP430TargetInfo();
case EM_PPC:
return getPPCTargetInfo();
case EM_PPC64:
return getPPC64TargetInfo();
case EM_RISCV:
return getRISCVTargetInfo();
case EM_SPARCV9:
return getSPARCV9TargetInfo();
case EM_X86_64:
return getX86_64TargetInfo();
}
llvm_unreachable("unknown target machine");
}
[Coding style change] Rename variables so that they start with a lowercase letter This patch is mechanically generated by clang-llvm-rename tool that I wrote using Clang Refactoring Engine just for creating this patch. You can see the source code of the tool at https://reviews.llvm.org/D64123. There's no manual post-processing; you can generate the same patch by re-running the tool against lld's code base. Here is the main discussion thread to change the LLVM coding style: https://lists.llvm.org/pipermail/llvm-dev/2019-February/130083.html In the discussion thread, I proposed we use lld as a testbed for variable naming scheme change, and this patch does that. I chose to rename variables so that they are in camelCase, just because that is a minimal change to make variables to start with a lowercase letter. Note to downstream patch maintainers: if you are maintaining a downstream lld repo, just rebasing ahead of this commit would cause massive merge conflicts because this patch essentially changes every line in the lld subdirectory. But there's a remedy. clang-llvm-rename tool is a batch tool, so you can rename variables in your downstream repo with the tool. Given that, here is how to rebase your repo to a commit after the mass renaming: 1. rebase to the commit just before the mass variable renaming, 2. apply the tool to your downstream repo to mass-rename variables locally, and 3. rebase again to the head. Most changes made by the tool should be identical for a downstream repo and for the head, so at the step 3, almost all changes should be merged and disappear. I'd expect that there would be some lines that you need to merge by hand, but that shouldn't be too many. Differential Revision: https://reviews.llvm.org/D64121 llvm-svn: 365595
2019-07-10 13:00:37 +08:00
template <class ELFT> static ErrorPlace getErrPlace(const uint8_t *loc) {
for (InputSectionBase *d : inputSections) {
auto *isec = cast<InputSection>(d);
if (!isec->getParent())
continue;
[Coding style change] Rename variables so that they start with a lowercase letter This patch is mechanically generated by clang-llvm-rename tool that I wrote using Clang Refactoring Engine just for creating this patch. You can see the source code of the tool at https://reviews.llvm.org/D64123. There's no manual post-processing; you can generate the same patch by re-running the tool against lld's code base. Here is the main discussion thread to change the LLVM coding style: https://lists.llvm.org/pipermail/llvm-dev/2019-February/130083.html In the discussion thread, I proposed we use lld as a testbed for variable naming scheme change, and this patch does that. I chose to rename variables so that they are in camelCase, just because that is a minimal change to make variables to start with a lowercase letter. Note to downstream patch maintainers: if you are maintaining a downstream lld repo, just rebasing ahead of this commit would cause massive merge conflicts because this patch essentially changes every line in the lld subdirectory. But there's a remedy. clang-llvm-rename tool is a batch tool, so you can rename variables in your downstream repo with the tool. Given that, here is how to rebase your repo to a commit after the mass renaming: 1. rebase to the commit just before the mass variable renaming, 2. apply the tool to your downstream repo to mass-rename variables locally, and 3. rebase again to the head. Most changes made by the tool should be identical for a downstream repo and for the head, so at the step 3, almost all changes should be merged and disappear. I'd expect that there would be some lines that you need to merge by hand, but that shouldn't be too many. Differential Revision: https://reviews.llvm.org/D64121 llvm-svn: 365595
2019-07-10 13:00:37 +08:00
uint8_t *isecLoc = Out::bufferStart + isec->getParent()->offset + isec->outSecOff;
if (isecLoc <= loc && loc < isecLoc + isec->getSize())
return {isec, isec->template getLocation<ELFT>(loc - isecLoc) + ": "};
}
return {};
}
[Coding style change] Rename variables so that they start with a lowercase letter This patch is mechanically generated by clang-llvm-rename tool that I wrote using Clang Refactoring Engine just for creating this patch. You can see the source code of the tool at https://reviews.llvm.org/D64123. There's no manual post-processing; you can generate the same patch by re-running the tool against lld's code base. Here is the main discussion thread to change the LLVM coding style: https://lists.llvm.org/pipermail/llvm-dev/2019-February/130083.html In the discussion thread, I proposed we use lld as a testbed for variable naming scheme change, and this patch does that. I chose to rename variables so that they are in camelCase, just because that is a minimal change to make variables to start with a lowercase letter. Note to downstream patch maintainers: if you are maintaining a downstream lld repo, just rebasing ahead of this commit would cause massive merge conflicts because this patch essentially changes every line in the lld subdirectory. But there's a remedy. clang-llvm-rename tool is a batch tool, so you can rename variables in your downstream repo with the tool. Given that, here is how to rebase your repo to a commit after the mass renaming: 1. rebase to the commit just before the mass variable renaming, 2. apply the tool to your downstream repo to mass-rename variables locally, and 3. rebase again to the head. Most changes made by the tool should be identical for a downstream repo and for the head, so at the step 3, almost all changes should be merged and disappear. I'd expect that there would be some lines that you need to merge by hand, but that shouldn't be too many. Differential Revision: https://reviews.llvm.org/D64121 llvm-svn: 365595
2019-07-10 13:00:37 +08:00
ErrorPlace elf::getErrorPlace(const uint8_t *loc) {
switch (config->ekind) {
case ELF32LEKind:
[Coding style change] Rename variables so that they start with a lowercase letter This patch is mechanically generated by clang-llvm-rename tool that I wrote using Clang Refactoring Engine just for creating this patch. You can see the source code of the tool at https://reviews.llvm.org/D64123. There's no manual post-processing; you can generate the same patch by re-running the tool against lld's code base. Here is the main discussion thread to change the LLVM coding style: https://lists.llvm.org/pipermail/llvm-dev/2019-February/130083.html In the discussion thread, I proposed we use lld as a testbed for variable naming scheme change, and this patch does that. I chose to rename variables so that they are in camelCase, just because that is a minimal change to make variables to start with a lowercase letter. Note to downstream patch maintainers: if you are maintaining a downstream lld repo, just rebasing ahead of this commit would cause massive merge conflicts because this patch essentially changes every line in the lld subdirectory. But there's a remedy. clang-llvm-rename tool is a batch tool, so you can rename variables in your downstream repo with the tool. Given that, here is how to rebase your repo to a commit after the mass renaming: 1. rebase to the commit just before the mass variable renaming, 2. apply the tool to your downstream repo to mass-rename variables locally, and 3. rebase again to the head. Most changes made by the tool should be identical for a downstream repo and for the head, so at the step 3, almost all changes should be merged and disappear. I'd expect that there would be some lines that you need to merge by hand, but that shouldn't be too many. Differential Revision: https://reviews.llvm.org/D64121 llvm-svn: 365595
2019-07-10 13:00:37 +08:00
return getErrPlace<ELF32LE>(loc);
case ELF32BEKind:
[Coding style change] Rename variables so that they start with a lowercase letter This patch is mechanically generated by clang-llvm-rename tool that I wrote using Clang Refactoring Engine just for creating this patch. You can see the source code of the tool at https://reviews.llvm.org/D64123. There's no manual post-processing; you can generate the same patch by re-running the tool against lld's code base. Here is the main discussion thread to change the LLVM coding style: https://lists.llvm.org/pipermail/llvm-dev/2019-February/130083.html In the discussion thread, I proposed we use lld as a testbed for variable naming scheme change, and this patch does that. I chose to rename variables so that they are in camelCase, just because that is a minimal change to make variables to start with a lowercase letter. Note to downstream patch maintainers: if you are maintaining a downstream lld repo, just rebasing ahead of this commit would cause massive merge conflicts because this patch essentially changes every line in the lld subdirectory. But there's a remedy. clang-llvm-rename tool is a batch tool, so you can rename variables in your downstream repo with the tool. Given that, here is how to rebase your repo to a commit after the mass renaming: 1. rebase to the commit just before the mass variable renaming, 2. apply the tool to your downstream repo to mass-rename variables locally, and 3. rebase again to the head. Most changes made by the tool should be identical for a downstream repo and for the head, so at the step 3, almost all changes should be merged and disappear. I'd expect that there would be some lines that you need to merge by hand, but that shouldn't be too many. Differential Revision: https://reviews.llvm.org/D64121 llvm-svn: 365595
2019-07-10 13:00:37 +08:00
return getErrPlace<ELF32BE>(loc);
case ELF64LEKind:
[Coding style change] Rename variables so that they start with a lowercase letter This patch is mechanically generated by clang-llvm-rename tool that I wrote using Clang Refactoring Engine just for creating this patch. You can see the source code of the tool at https://reviews.llvm.org/D64123. There's no manual post-processing; you can generate the same patch by re-running the tool against lld's code base. Here is the main discussion thread to change the LLVM coding style: https://lists.llvm.org/pipermail/llvm-dev/2019-February/130083.html In the discussion thread, I proposed we use lld as a testbed for variable naming scheme change, and this patch does that. I chose to rename variables so that they are in camelCase, just because that is a minimal change to make variables to start with a lowercase letter. Note to downstream patch maintainers: if you are maintaining a downstream lld repo, just rebasing ahead of this commit would cause massive merge conflicts because this patch essentially changes every line in the lld subdirectory. But there's a remedy. clang-llvm-rename tool is a batch tool, so you can rename variables in your downstream repo with the tool. Given that, here is how to rebase your repo to a commit after the mass renaming: 1. rebase to the commit just before the mass variable renaming, 2. apply the tool to your downstream repo to mass-rename variables locally, and 3. rebase again to the head. Most changes made by the tool should be identical for a downstream repo and for the head, so at the step 3, almost all changes should be merged and disappear. I'd expect that there would be some lines that you need to merge by hand, but that shouldn't be too many. Differential Revision: https://reviews.llvm.org/D64121 llvm-svn: 365595
2019-07-10 13:00:37 +08:00
return getErrPlace<ELF64LE>(loc);
case ELF64BEKind:
[Coding style change] Rename variables so that they start with a lowercase letter This patch is mechanically generated by clang-llvm-rename tool that I wrote using Clang Refactoring Engine just for creating this patch. You can see the source code of the tool at https://reviews.llvm.org/D64123. There's no manual post-processing; you can generate the same patch by re-running the tool against lld's code base. Here is the main discussion thread to change the LLVM coding style: https://lists.llvm.org/pipermail/llvm-dev/2019-February/130083.html In the discussion thread, I proposed we use lld as a testbed for variable naming scheme change, and this patch does that. I chose to rename variables so that they are in camelCase, just because that is a minimal change to make variables to start with a lowercase letter. Note to downstream patch maintainers: if you are maintaining a downstream lld repo, just rebasing ahead of this commit would cause massive merge conflicts because this patch essentially changes every line in the lld subdirectory. But there's a remedy. clang-llvm-rename tool is a batch tool, so you can rename variables in your downstream repo with the tool. Given that, here is how to rebase your repo to a commit after the mass renaming: 1. rebase to the commit just before the mass variable renaming, 2. apply the tool to your downstream repo to mass-rename variables locally, and 3. rebase again to the head. Most changes made by the tool should be identical for a downstream repo and for the head, so at the step 3, almost all changes should be merged and disappear. I'd expect that there would be some lines that you need to merge by hand, but that shouldn't be too many. Differential Revision: https://reviews.llvm.org/D64121 llvm-svn: 365595
2019-07-10 13:00:37 +08:00
return getErrPlace<ELF64BE>(loc);
default:
llvm_unreachable("unknown ELF type");
}
}
TargetInfo::~TargetInfo() {}
[Coding style change] Rename variables so that they start with a lowercase letter This patch is mechanically generated by clang-llvm-rename tool that I wrote using Clang Refactoring Engine just for creating this patch. You can see the source code of the tool at https://reviews.llvm.org/D64123. There's no manual post-processing; you can generate the same patch by re-running the tool against lld's code base. Here is the main discussion thread to change the LLVM coding style: https://lists.llvm.org/pipermail/llvm-dev/2019-February/130083.html In the discussion thread, I proposed we use lld as a testbed for variable naming scheme change, and this patch does that. I chose to rename variables so that they are in camelCase, just because that is a minimal change to make variables to start with a lowercase letter. Note to downstream patch maintainers: if you are maintaining a downstream lld repo, just rebasing ahead of this commit would cause massive merge conflicts because this patch essentially changes every line in the lld subdirectory. But there's a remedy. clang-llvm-rename tool is a batch tool, so you can rename variables in your downstream repo with the tool. Given that, here is how to rebase your repo to a commit after the mass renaming: 1. rebase to the commit just before the mass variable renaming, 2. apply the tool to your downstream repo to mass-rename variables locally, and 3. rebase again to the head. Most changes made by the tool should be identical for a downstream repo and for the head, so at the step 3, almost all changes should be merged and disappear. I'd expect that there would be some lines that you need to merge by hand, but that shouldn't be too many. Differential Revision: https://reviews.llvm.org/D64121 llvm-svn: 365595
2019-07-10 13:00:37 +08:00
int64_t TargetInfo::getImplicitAddend(const uint8_t *buf, RelType type) const {
return 0;
}
[Coding style change] Rename variables so that they start with a lowercase letter This patch is mechanically generated by clang-llvm-rename tool that I wrote using Clang Refactoring Engine just for creating this patch. You can see the source code of the tool at https://reviews.llvm.org/D64123. There's no manual post-processing; you can generate the same patch by re-running the tool against lld's code base. Here is the main discussion thread to change the LLVM coding style: https://lists.llvm.org/pipermail/llvm-dev/2019-February/130083.html In the discussion thread, I proposed we use lld as a testbed for variable naming scheme change, and this patch does that. I chose to rename variables so that they are in camelCase, just because that is a minimal change to make variables to start with a lowercase letter. Note to downstream patch maintainers: if you are maintaining a downstream lld repo, just rebasing ahead of this commit would cause massive merge conflicts because this patch essentially changes every line in the lld subdirectory. But there's a remedy. clang-llvm-rename tool is a batch tool, so you can rename variables in your downstream repo with the tool. Given that, here is how to rebase your repo to a commit after the mass renaming: 1. rebase to the commit just before the mass variable renaming, 2. apply the tool to your downstream repo to mass-rename variables locally, and 3. rebase again to the head. Most changes made by the tool should be identical for a downstream repo and for the head, so at the step 3, almost all changes should be merged and disappear. I'd expect that there would be some lines that you need to merge by hand, but that shouldn't be too many. Differential Revision: https://reviews.llvm.org/D64121 llvm-svn: 365595
2019-07-10 13:00:37 +08:00
bool TargetInfo::usesOnlyLowPageBits(RelType type) const { return false; }
[Coding style change] Rename variables so that they start with a lowercase letter This patch is mechanically generated by clang-llvm-rename tool that I wrote using Clang Refactoring Engine just for creating this patch. You can see the source code of the tool at https://reviews.llvm.org/D64123. There's no manual post-processing; you can generate the same patch by re-running the tool against lld's code base. Here is the main discussion thread to change the LLVM coding style: https://lists.llvm.org/pipermail/llvm-dev/2019-February/130083.html In the discussion thread, I proposed we use lld as a testbed for variable naming scheme change, and this patch does that. I chose to rename variables so that they are in camelCase, just because that is a minimal change to make variables to start with a lowercase letter. Note to downstream patch maintainers: if you are maintaining a downstream lld repo, just rebasing ahead of this commit would cause massive merge conflicts because this patch essentially changes every line in the lld subdirectory. But there's a remedy. clang-llvm-rename tool is a batch tool, so you can rename variables in your downstream repo with the tool. Given that, here is how to rebase your repo to a commit after the mass renaming: 1. rebase to the commit just before the mass variable renaming, 2. apply the tool to your downstream repo to mass-rename variables locally, and 3. rebase again to the head. Most changes made by the tool should be identical for a downstream repo and for the head, so at the step 3, almost all changes should be merged and disappear. I'd expect that there would be some lines that you need to merge by hand, but that shouldn't be too many. Differential Revision: https://reviews.llvm.org/D64121 llvm-svn: 365595
2019-07-10 13:00:37 +08:00
bool TargetInfo::needsThunk(RelExpr expr, RelType type, const InputFile *file,
uint64_t branchAddr, const Symbol &s) const {
return false;
[ELF] Implement infrastructure for thunk code creation Some targets might require creation of thunks. For example, MIPS targets require stubs to call PIC code from non-PIC one. The patch implements infrastructure for thunk code creation and provides support for MIPS LA25 stubs. Any MIPS PIC code function is invoked with its address in register $t9. So if we have a branch instruction from non-PIC code to the PIC one we cannot make the jump directly and need to create a small stub to save the target function address. See page 3-38 ftp://www.linux-mips.org/pub/linux/mips/doc/ABI/mipsabi.pdf - In relocation scanning phase we ask target about thunk creation necessity by calling `TagetInfo::needsThunk` method. The `InputSection` class maintains list of Symbols requires thunk creation. - Reassigning offsets performed for each input sections after relocation scanning complete because position of each section might change due thunk creation. - The patch introduces new dedicated value for DefinedSynthetic symbols DefinedSynthetic::SectionEnd. Synthetic symbol with that value always points to the end of the corresponding output section. That allows to escape updating synthetic symbols if output sections sizes changes after relocation scanning due thunk creation. - In the `InputSection::writeTo` method we write thunks after corresponding input section. Each thunk is written by calling `TargetInfo::writeThunk` method. - The patch supports the only type of thunk code for each target. For now, it is enough. Differential Revision: http://reviews.llvm.org/D17934 llvm-svn: 265059
2016-04-01 05:26:23 +08:00
}
[Coding style change] Rename variables so that they start with a lowercase letter This patch is mechanically generated by clang-llvm-rename tool that I wrote using Clang Refactoring Engine just for creating this patch. You can see the source code of the tool at https://reviews.llvm.org/D64123. There's no manual post-processing; you can generate the same patch by re-running the tool against lld's code base. Here is the main discussion thread to change the LLVM coding style: https://lists.llvm.org/pipermail/llvm-dev/2019-February/130083.html In the discussion thread, I proposed we use lld as a testbed for variable naming scheme change, and this patch does that. I chose to rename variables so that they are in camelCase, just because that is a minimal change to make variables to start with a lowercase letter. Note to downstream patch maintainers: if you are maintaining a downstream lld repo, just rebasing ahead of this commit would cause massive merge conflicts because this patch essentially changes every line in the lld subdirectory. But there's a remedy. clang-llvm-rename tool is a batch tool, so you can rename variables in your downstream repo with the tool. Given that, here is how to rebase your repo to a commit after the mass renaming: 1. rebase to the commit just before the mass variable renaming, 2. apply the tool to your downstream repo to mass-rename variables locally, and 3. rebase again to the head. Most changes made by the tool should be identical for a downstream repo and for the head, so at the step 3, almost all changes should be merged and disappear. I'd expect that there would be some lines that you need to merge by hand, but that shouldn't be too many. Differential Revision: https://reviews.llvm.org/D64121 llvm-svn: 365595
2019-07-10 13:00:37 +08:00
bool TargetInfo::adjustPrologueForCrossSplitStack(uint8_t *loc, uint8_t *end,
uint8_t stOther) const {
llvm_unreachable("Target doesn't support split stacks.");
}
[Coding style change] Rename variables so that they start with a lowercase letter This patch is mechanically generated by clang-llvm-rename tool that I wrote using Clang Refactoring Engine just for creating this patch. You can see the source code of the tool at https://reviews.llvm.org/D64123. There's no manual post-processing; you can generate the same patch by re-running the tool against lld's code base. Here is the main discussion thread to change the LLVM coding style: https://lists.llvm.org/pipermail/llvm-dev/2019-February/130083.html In the discussion thread, I proposed we use lld as a testbed for variable naming scheme change, and this patch does that. I chose to rename variables so that they are in camelCase, just because that is a minimal change to make variables to start with a lowercase letter. Note to downstream patch maintainers: if you are maintaining a downstream lld repo, just rebasing ahead of this commit would cause massive merge conflicts because this patch essentially changes every line in the lld subdirectory. But there's a remedy. clang-llvm-rename tool is a batch tool, so you can rename variables in your downstream repo with the tool. Given that, here is how to rebase your repo to a commit after the mass renaming: 1. rebase to the commit just before the mass variable renaming, 2. apply the tool to your downstream repo to mass-rename variables locally, and 3. rebase again to the head. Most changes made by the tool should be identical for a downstream repo and for the head, so at the step 3, almost all changes should be merged and disappear. I'd expect that there would be some lines that you need to merge by hand, but that shouldn't be too many. Differential Revision: https://reviews.llvm.org/D64121 llvm-svn: 365595
2019-07-10 13:00:37 +08:00
bool TargetInfo::inBranchRange(RelType type, uint64_t src, uint64_t dst) const {
return true;
}
[Coding style change] Rename variables so that they start with a lowercase letter This patch is mechanically generated by clang-llvm-rename tool that I wrote using Clang Refactoring Engine just for creating this patch. You can see the source code of the tool at https://reviews.llvm.org/D64123. There's no manual post-processing; you can generate the same patch by re-running the tool against lld's code base. Here is the main discussion thread to change the LLVM coding style: https://lists.llvm.org/pipermail/llvm-dev/2019-February/130083.html In the discussion thread, I proposed we use lld as a testbed for variable naming scheme change, and this patch does that. I chose to rename variables so that they are in camelCase, just because that is a minimal change to make variables to start with a lowercase letter. Note to downstream patch maintainers: if you are maintaining a downstream lld repo, just rebasing ahead of this commit would cause massive merge conflicts because this patch essentially changes every line in the lld subdirectory. But there's a remedy. clang-llvm-rename tool is a batch tool, so you can rename variables in your downstream repo with the tool. Given that, here is how to rebase your repo to a commit after the mass renaming: 1. rebase to the commit just before the mass variable renaming, 2. apply the tool to your downstream repo to mass-rename variables locally, and 3. rebase again to the head. Most changes made by the tool should be identical for a downstream repo and for the head, so at the step 3, almost all changes should be merged and disappear. I'd expect that there would be some lines that you need to merge by hand, but that shouldn't be too many. Differential Revision: https://reviews.llvm.org/D64121 llvm-svn: 365595
2019-07-10 13:00:37 +08:00
void TargetInfo::writeIgotPlt(uint8_t *buf, const Symbol &s) const {
writeGotPlt(buf, s);
}
[Coding style change] Rename variables so that they start with a lowercase letter This patch is mechanically generated by clang-llvm-rename tool that I wrote using Clang Refactoring Engine just for creating this patch. You can see the source code of the tool at https://reviews.llvm.org/D64123. There's no manual post-processing; you can generate the same patch by re-running the tool against lld's code base. Here is the main discussion thread to change the LLVM coding style: https://lists.llvm.org/pipermail/llvm-dev/2019-February/130083.html In the discussion thread, I proposed we use lld as a testbed for variable naming scheme change, and this patch does that. I chose to rename variables so that they are in camelCase, just because that is a minimal change to make variables to start with a lowercase letter. Note to downstream patch maintainers: if you are maintaining a downstream lld repo, just rebasing ahead of this commit would cause massive merge conflicts because this patch essentially changes every line in the lld subdirectory. But there's a remedy. clang-llvm-rename tool is a batch tool, so you can rename variables in your downstream repo with the tool. Given that, here is how to rebase your repo to a commit after the mass renaming: 1. rebase to the commit just before the mass variable renaming, 2. apply the tool to your downstream repo to mass-rename variables locally, and 3. rebase again to the head. Most changes made by the tool should be identical for a downstream repo and for the head, so at the step 3, almost all changes should be merged and disappear. I'd expect that there would be some lines that you need to merge by hand, but that shouldn't be too many. Differential Revision: https://reviews.llvm.org/D64121 llvm-svn: 365595
2019-07-10 13:00:37 +08:00
RelExpr TargetInfo::adjustRelaxExpr(RelType type, const uint8_t *data,
RelExpr expr) const {
return expr;
}
[Coding style change] Rename variables so that they start with a lowercase letter This patch is mechanically generated by clang-llvm-rename tool that I wrote using Clang Refactoring Engine just for creating this patch. You can see the source code of the tool at https://reviews.llvm.org/D64123. There's no manual post-processing; you can generate the same patch by re-running the tool against lld's code base. Here is the main discussion thread to change the LLVM coding style: https://lists.llvm.org/pipermail/llvm-dev/2019-February/130083.html In the discussion thread, I proposed we use lld as a testbed for variable naming scheme change, and this patch does that. I chose to rename variables so that they are in camelCase, just because that is a minimal change to make variables to start with a lowercase letter. Note to downstream patch maintainers: if you are maintaining a downstream lld repo, just rebasing ahead of this commit would cause massive merge conflicts because this patch essentially changes every line in the lld subdirectory. But there's a remedy. clang-llvm-rename tool is a batch tool, so you can rename variables in your downstream repo with the tool. Given that, here is how to rebase your repo to a commit after the mass renaming: 1. rebase to the commit just before the mass variable renaming, 2. apply the tool to your downstream repo to mass-rename variables locally, and 3. rebase again to the head. Most changes made by the tool should be identical for a downstream repo and for the head, so at the step 3, almost all changes should be merged and disappear. I'd expect that there would be some lines that you need to merge by hand, but that shouldn't be too many. Differential Revision: https://reviews.llvm.org/D64121 llvm-svn: 365595
2019-07-10 13:00:37 +08:00
void TargetInfo::relaxGot(uint8_t *loc, RelType type, uint64_t val) const {
llvm_unreachable("Should not have claimed to be relaxable");
}
[Coding style change] Rename variables so that they start with a lowercase letter This patch is mechanically generated by clang-llvm-rename tool that I wrote using Clang Refactoring Engine just for creating this patch. You can see the source code of the tool at https://reviews.llvm.org/D64123. There's no manual post-processing; you can generate the same patch by re-running the tool against lld's code base. Here is the main discussion thread to change the LLVM coding style: https://lists.llvm.org/pipermail/llvm-dev/2019-February/130083.html In the discussion thread, I proposed we use lld as a testbed for variable naming scheme change, and this patch does that. I chose to rename variables so that they are in camelCase, just because that is a minimal change to make variables to start with a lowercase letter. Note to downstream patch maintainers: if you are maintaining a downstream lld repo, just rebasing ahead of this commit would cause massive merge conflicts because this patch essentially changes every line in the lld subdirectory. But there's a remedy. clang-llvm-rename tool is a batch tool, so you can rename variables in your downstream repo with the tool. Given that, here is how to rebase your repo to a commit after the mass renaming: 1. rebase to the commit just before the mass variable renaming, 2. apply the tool to your downstream repo to mass-rename variables locally, and 3. rebase again to the head. Most changes made by the tool should be identical for a downstream repo and for the head, so at the step 3, almost all changes should be merged and disappear. I'd expect that there would be some lines that you need to merge by hand, but that shouldn't be too many. Differential Revision: https://reviews.llvm.org/D64121 llvm-svn: 365595
2019-07-10 13:00:37 +08:00
void TargetInfo::relaxTlsGdToLe(uint8_t *loc, RelType type,
uint64_t val) const {
llvm_unreachable("Should not have claimed to be relaxable");
}
[Coding style change] Rename variables so that they start with a lowercase letter This patch is mechanically generated by clang-llvm-rename tool that I wrote using Clang Refactoring Engine just for creating this patch. You can see the source code of the tool at https://reviews.llvm.org/D64123. There's no manual post-processing; you can generate the same patch by re-running the tool against lld's code base. Here is the main discussion thread to change the LLVM coding style: https://lists.llvm.org/pipermail/llvm-dev/2019-February/130083.html In the discussion thread, I proposed we use lld as a testbed for variable naming scheme change, and this patch does that. I chose to rename variables so that they are in camelCase, just because that is a minimal change to make variables to start with a lowercase letter. Note to downstream patch maintainers: if you are maintaining a downstream lld repo, just rebasing ahead of this commit would cause massive merge conflicts because this patch essentially changes every line in the lld subdirectory. But there's a remedy. clang-llvm-rename tool is a batch tool, so you can rename variables in your downstream repo with the tool. Given that, here is how to rebase your repo to a commit after the mass renaming: 1. rebase to the commit just before the mass variable renaming, 2. apply the tool to your downstream repo to mass-rename variables locally, and 3. rebase again to the head. Most changes made by the tool should be identical for a downstream repo and for the head, so at the step 3, almost all changes should be merged and disappear. I'd expect that there would be some lines that you need to merge by hand, but that shouldn't be too many. Differential Revision: https://reviews.llvm.org/D64121 llvm-svn: 365595
2019-07-10 13:00:37 +08:00
void TargetInfo::relaxTlsGdToIe(uint8_t *loc, RelType type,
uint64_t val) const {
llvm_unreachable("Should not have claimed to be relaxable");
}
[Coding style change] Rename variables so that they start with a lowercase letter This patch is mechanically generated by clang-llvm-rename tool that I wrote using Clang Refactoring Engine just for creating this patch. You can see the source code of the tool at https://reviews.llvm.org/D64123. There's no manual post-processing; you can generate the same patch by re-running the tool against lld's code base. Here is the main discussion thread to change the LLVM coding style: https://lists.llvm.org/pipermail/llvm-dev/2019-February/130083.html In the discussion thread, I proposed we use lld as a testbed for variable naming scheme change, and this patch does that. I chose to rename variables so that they are in camelCase, just because that is a minimal change to make variables to start with a lowercase letter. Note to downstream patch maintainers: if you are maintaining a downstream lld repo, just rebasing ahead of this commit would cause massive merge conflicts because this patch essentially changes every line in the lld subdirectory. But there's a remedy. clang-llvm-rename tool is a batch tool, so you can rename variables in your downstream repo with the tool. Given that, here is how to rebase your repo to a commit after the mass renaming: 1. rebase to the commit just before the mass variable renaming, 2. apply the tool to your downstream repo to mass-rename variables locally, and 3. rebase again to the head. Most changes made by the tool should be identical for a downstream repo and for the head, so at the step 3, almost all changes should be merged and disappear. I'd expect that there would be some lines that you need to merge by hand, but that shouldn't be too many. Differential Revision: https://reviews.llvm.org/D64121 llvm-svn: 365595
2019-07-10 13:00:37 +08:00
void TargetInfo::relaxTlsIeToLe(uint8_t *loc, RelType type,
uint64_t val) const {
llvm_unreachable("Should not have claimed to be relaxable");
}
[Coding style change] Rename variables so that they start with a lowercase letter This patch is mechanically generated by clang-llvm-rename tool that I wrote using Clang Refactoring Engine just for creating this patch. You can see the source code of the tool at https://reviews.llvm.org/D64123. There's no manual post-processing; you can generate the same patch by re-running the tool against lld's code base. Here is the main discussion thread to change the LLVM coding style: https://lists.llvm.org/pipermail/llvm-dev/2019-February/130083.html In the discussion thread, I proposed we use lld as a testbed for variable naming scheme change, and this patch does that. I chose to rename variables so that they are in camelCase, just because that is a minimal change to make variables to start with a lowercase letter. Note to downstream patch maintainers: if you are maintaining a downstream lld repo, just rebasing ahead of this commit would cause massive merge conflicts because this patch essentially changes every line in the lld subdirectory. But there's a remedy. clang-llvm-rename tool is a batch tool, so you can rename variables in your downstream repo with the tool. Given that, here is how to rebase your repo to a commit after the mass renaming: 1. rebase to the commit just before the mass variable renaming, 2. apply the tool to your downstream repo to mass-rename variables locally, and 3. rebase again to the head. Most changes made by the tool should be identical for a downstream repo and for the head, so at the step 3, almost all changes should be merged and disappear. I'd expect that there would be some lines that you need to merge by hand, but that shouldn't be too many. Differential Revision: https://reviews.llvm.org/D64121 llvm-svn: 365595
2019-07-10 13:00:37 +08:00
void TargetInfo::relaxTlsLdToLe(uint8_t *loc, RelType type,
uint64_t val) const {
llvm_unreachable("Should not have claimed to be relaxable");
}
uint64_t TargetInfo::getImageBase() const {
// Use -image-base if set. Fall back to the target default if not.
[Coding style change] Rename variables so that they start with a lowercase letter This patch is mechanically generated by clang-llvm-rename tool that I wrote using Clang Refactoring Engine just for creating this patch. You can see the source code of the tool at https://reviews.llvm.org/D64123. There's no manual post-processing; you can generate the same patch by re-running the tool against lld's code base. Here is the main discussion thread to change the LLVM coding style: https://lists.llvm.org/pipermail/llvm-dev/2019-February/130083.html In the discussion thread, I proposed we use lld as a testbed for variable naming scheme change, and this patch does that. I chose to rename variables so that they are in camelCase, just because that is a minimal change to make variables to start with a lowercase letter. Note to downstream patch maintainers: if you are maintaining a downstream lld repo, just rebasing ahead of this commit would cause massive merge conflicts because this patch essentially changes every line in the lld subdirectory. But there's a remedy. clang-llvm-rename tool is a batch tool, so you can rename variables in your downstream repo with the tool. Given that, here is how to rebase your repo to a commit after the mass renaming: 1. rebase to the commit just before the mass variable renaming, 2. apply the tool to your downstream repo to mass-rename variables locally, and 3. rebase again to the head. Most changes made by the tool should be identical for a downstream repo and for the head, so at the step 3, almost all changes should be merged and disappear. I'd expect that there would be some lines that you need to merge by hand, but that shouldn't be too many. Differential Revision: https://reviews.llvm.org/D64121 llvm-svn: 365595
2019-07-10 13:00:37 +08:00
if (config->imageBase)
return *config->imageBase;
return config->isPic ? 0 : defaultImageBase;
}