maxjhandsome
/
llvm-project
forked from OSchip/llvm-project
1
0
Fork 0
Code Issues Pull Requests Packages Releases Wiki Activity
llvm-project/llvm/test/Transforms/Inline/alloca-bonus.ll

156 lines
3.8 KiB
LLVM
Raw Normal View History

Fix CountCodeReductionForAlloca to more accurately represent what SROA can and can't handle. Also don't produce non-zero results for things which won't be transformed by SROA at all just because we saw the loads/stores before we saw the use of the address. llvm-svn: 148536
2012-01-20 16:35:20 +08:00
; RUN: opt -inline < %s -S -o - -inline-threshold=8 | FileCheck %s
Initial commit for the rewrite of the inline cost analysis to operate on a per-callsite walk of the called function's instructions, in breadth-first order over the potentially reachable set of basic blocks. This is a major shift in how inline cost analysis works to improve the accuracy and rationality of inlining decisions. A brief outline of the algorithm this moves to: - Build a simplification mapping based on the callsite arguments to the function arguments. - Push the entry block onto a worklist of potentially-live basic blocks. - Pop the first block off of the *front* of the worklist (for breadth-first ordering) and walk its instructions using a custom InstVisitor. - For each instruction's operands, re-map them based on the simplification mappings available for the given callsite. - Compute any simplification possible of the instruction after re-mapping, and store that back int othe simplification mapping. - Compute any bonuses, costs, or other impacts of the instruction on the cost metric. - When the terminator is reached, replace any conditional value in the terminator with any simplifications from the mapping we have, and add any successors which are not proven to be dead from these simplifications to the worklist. - Pop the next block off of the front of the worklist, and repeat. - As soon as the cost of inlining exceeds the threshold for the callsite, stop analyzing the function in order to bound cost. The primary goal of this algorithm is to perfectly handle dead code paths. We do not want any code in trivially dead code paths to impact inlining decisions. The previous metric was *extremely* flawed here, and would always subtract the average cost of two successors of a conditional branch when it was proven to become an unconditional branch at the callsite. There was no handling of wildly different costs between the two successors, which would cause inlining when the path actually taken was too large, and no inlining when the path actually taken was trivially simple. There was also no handling of the code *path*, only the immediate successors. These problems vanish completely now. See the added regression tests for the shiny new features -- we skip recursive function calls, SROA-killing instructions, and high cost complex CFG structures when dead at the callsite being analyzed. Switching to this algorithm required refactoring the inline cost interface to accept the actual threshold rather than simply returning a single cost. The resulting interface is pretty bad, and I'm planning to do lots of interface cleanup after this patch. Several other refactorings fell out of this, but I've tried to minimize them for this patch. =/ There is still more cleanup that can be done here. Please point out anything that you see in review. I've worked really hard to try to mirror at least the spirit of all of the previous heuristics in the new model. It's not clear that they are all correct any more, but I wanted to minimize the change in this single patch, it's already a bit ridiculous. One heuristic that is *not* yet mirrored is to allow inlining of functions with a dynamic alloca *if* the caller has a dynamic alloca. I will add this back, but I think the most reasonable way requires changes to the inliner itself rather than just the cost metric, and so I've deferred this for a subsequent patch. The test case is XFAIL-ed until then. As mentioned in the review mail, this seems to make Clang run about 1% to 2% faster in -O0, but makes its binary size grow by just under 4%. I've looked into the 4% growth, and it can be fixed, but requires changes to other parts of the inliner. llvm-svn: 153812
2012-03-31 20:42:41 +08:00
target datalayout = "p:32:32"
Fix CountCodeReductionForAlloca to more accurately represent what SROA can and can't handle. Also don't produce non-zero results for things which won't be transformed by SROA at all just because we saw the loads/stores before we saw the use of the address. llvm-svn: 148536
2012-01-20 16:35:20 +08:00
declare void @llvm.lifetime.start(i64 %size, i8* nocapture %ptr)
@glbl = external global i32
define void @outer1() {
Update Transforms tests to use CHECK-LABEL for easier debugging. No functionality change. This update was done with the following bash script: find test/Transforms -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_]*\):\( *\)@$FUNC\([( ]*\)\$/;\1\2-LABEL:\3@$FUNC(/g" $TEMP done mv $TEMP $NAME fi done llvm-svn: 186268
2013-07-14 09:42:54 +08:00
; CHECK-LABEL: @outer1(
Fix CountCodeReductionForAlloca to more accurately represent what SROA can and can't handle. Also don't produce non-zero results for things which won't be transformed by SROA at all just because we saw the loads/stores before we saw the use of the address. llvm-svn: 148536
2012-01-20 16:35:20 +08:00
; CHECK-NOT: call void @inner1
%ptr = alloca i32
call void @inner1(i32* %ptr)
ret void
}
define void @inner1(i32 *%ptr) {
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%A = load i32, i32* %ptr
Fix CountCodeReductionForAlloca to more accurately represent what SROA can and can't handle. Also don't produce non-zero results for things which won't be transformed by SROA at all just because we saw the loads/stores before we saw the use of the address. llvm-svn: 148536
2012-01-20 16:35:20 +08:00
store i32 0, i32* %ptr
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%C = getelementptr inbounds i32, i32* %ptr, i32 0
%D = getelementptr inbounds i32, i32* %ptr, i32 1
Fix CountCodeReductionForAlloca to more accurately represent what SROA can and can't handle. Also don't produce non-zero results for things which won't be transformed by SROA at all just because we saw the loads/stores before we saw the use of the address. llvm-svn: 148536
2012-01-20 16:35:20 +08:00
%E = bitcast i32* %ptr to i8*
%F = select i1 false, i32* %ptr, i32* @glbl
call void @llvm.lifetime.start(i64 0, i8* %E)
ret void
}
define void @outer2() {
Update Transforms tests to use CHECK-LABEL for easier debugging. No functionality change. This update was done with the following bash script: find test/Transforms -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_]*\):\( *\)@$FUNC\([( ]*\)\$/;\1\2-LABEL:\3@$FUNC(/g" $TEMP done mv $TEMP $NAME fi done llvm-svn: 186268
2013-07-14 09:42:54 +08:00
; CHECK-LABEL: @outer2(
Fix CountCodeReductionForAlloca to more accurately represent what SROA can and can't handle. Also don't produce non-zero results for things which won't be transformed by SROA at all just because we saw the loads/stores before we saw the use of the address. llvm-svn: 148536
2012-01-20 16:35:20 +08:00
; CHECK: call void @inner2
%ptr = alloca i32
call void @inner2(i32* %ptr)
ret void
}
; %D poisons this call, scalar-repl can't handle that instruction.
define void @inner2(i32 *%ptr) {
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%A = load i32, i32* %ptr
Fix CountCodeReductionForAlloca to more accurately represent what SROA can and can't handle. Also don't produce non-zero results for things which won't be transformed by SROA at all just because we saw the loads/stores before we saw the use of the address. llvm-svn: 148536
2012-01-20 16:35:20 +08:00
store i32 0, i32* %ptr
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%C = getelementptr inbounds i32, i32* %ptr, i32 0
%D = getelementptr inbounds i32, i32* %ptr, i32 %A
Fix CountCodeReductionForAlloca to more accurately represent what SROA can and can't handle. Also don't produce non-zero results for things which won't be transformed by SROA at all just because we saw the loads/stores before we saw the use of the address. llvm-svn: 148536
2012-01-20 16:35:20 +08:00
%E = bitcast i32* %ptr to i8*
%F = select i1 false, i32* %ptr, i32* @glbl
call void @llvm.lifetime.start(i64 0, i8* %E)
ret void
}
Support pointer comparisons against constants, when looking at the inline-cost savings from a pointer argument becoming an alloca. Sometimes callees will even compare a pointer to null and then branch to an otherwise unreachable block! Detect these cases and compute the number of saved instructions, instead of bailing out and reporting no savings. llvm-svn: 148941
2012-01-25 16:27:40 +08:00
define void @outer3() {
Update Transforms tests to use CHECK-LABEL for easier debugging. No functionality change. This update was done with the following bash script: find test/Transforms -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_]*\):\( *\)@$FUNC\([( ]*\)\$/;\1\2-LABEL:\3@$FUNC(/g" $TEMP done mv $TEMP $NAME fi done llvm-svn: 186268
2013-07-14 09:42:54 +08:00
; CHECK-LABEL: @outer3(
Support pointer comparisons against constants, when looking at the inline-cost savings from a pointer argument becoming an alloca. Sometimes callees will even compare a pointer to null and then branch to an otherwise unreachable block! Detect these cases and compute the number of saved instructions, instead of bailing out and reporting no savings. llvm-svn: 148941
2012-01-25 16:27:40 +08:00
; CHECK-NOT: call void @inner3
%ptr = alloca i32
call void @inner3(i32* %ptr, i1 undef)
ret void
}
define void @inner3(i32 *%ptr, i1 %x) {
%A = icmp eq i32* %ptr, null
%B = and i1 %x, %A
br i1 %A, label %bb.true, label %bb.false
bb.true:
; This block musn't be counted in the inline cost.
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%t1 = load i32, i32* %ptr
Support pointer comparisons against constants, when looking at the inline-cost savings from a pointer argument becoming an alloca. Sometimes callees will even compare a pointer to null and then branch to an otherwise unreachable block! Detect these cases and compute the number of saved instructions, instead of bailing out and reporting no savings. llvm-svn: 148941
2012-01-25 16:27:40 +08:00
%t2 = add i32 %t1, 1
%t3 = add i32 %t2, 1
%t4 = add i32 %t3, 1
%t5 = add i32 %t4, 1
%t6 = add i32 %t5, 1
%t7 = add i32 %t6, 1
%t8 = add i32 %t7, 1
%t9 = add i32 %t8, 1
%t10 = add i32 %t9, 1
%t11 = add i32 %t10, 1
%t12 = add i32 %t11, 1
%t13 = add i32 %t12, 1
%t14 = add i32 %t13, 1
%t15 = add i32 %t14, 1
%t16 = add i32 %t15, 1
%t17 = add i32 %t16, 1
%t18 = add i32 %t17, 1
%t19 = add i32 %t18, 1
%t20 = add i32 %t19, 1
ret void
bb.false:
ret void
}
Undo a previous restriction on the inline cost calculation which Nick introduced. Specifically, there are cost reductions for all constant-operand icmp instructions against an alloca, regardless of whether the alloca will in fact be elligible for SROA. That means we don't want to abort the icmp reduction computation when we abort the SROA reduction computation. That in turn frees us from the need to keep a separate worklist and defer the ICmp calculations. Use this new-found freedom and some judicious function boundaries to factor the innards of computing the cost factor of any given instruction out of the loop over the instructions and into static helper functions. This greatly simplifies the code, and hopefully makes it more clear what is happening here. Reviewed by Eric Christopher. There is some concern that we'd like to ensure this doesn't get out of hand, and I plan to benchmark the effects of this change over the next few days along with some further fixes to the inline cost. llvm-svn: 152368
2012-03-09 10:49:36 +08:00
define void @outer4(i32 %A) {
Update Transforms tests to use CHECK-LABEL for easier debugging. No functionality change. This update was done with the following bash script: find test/Transforms -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_]*\):\( *\)@$FUNC\([( ]*\)\$/;\1\2-LABEL:\3@$FUNC(/g" $TEMP done mv $TEMP $NAME fi done llvm-svn: 186268
2013-07-14 09:42:54 +08:00
; CHECK-LABEL: @outer4(
Undo a previous restriction on the inline cost calculation which Nick introduced. Specifically, there are cost reductions for all constant-operand icmp instructions against an alloca, regardless of whether the alloca will in fact be elligible for SROA. That means we don't want to abort the icmp reduction computation when we abort the SROA reduction computation. That in turn frees us from the need to keep a separate worklist and defer the ICmp calculations. Use this new-found freedom and some judicious function boundaries to factor the innards of computing the cost factor of any given instruction out of the loop over the instructions and into static helper functions. This greatly simplifies the code, and hopefully makes it more clear what is happening here. Reviewed by Eric Christopher. There is some concern that we'd like to ensure this doesn't get out of hand, and I plan to benchmark the effects of this change over the next few days along with some further fixes to the inline cost. llvm-svn: 152368
2012-03-09 10:49:36 +08:00
; CHECK-NOT: call void @inner4
%ptr = alloca i32
call void @inner4(i32* %ptr, i32 %A)
ret void
}
Clean up the naming in this test. Someone pointed this out in review at one point, and I forgot to go back and clean it up. Sorry about that. =/ llvm-svn: 153801
2012-03-31 18:38:48 +08:00
; %B poisons this call, scalar-repl can't handle that instruction. However, we
Undo a previous restriction on the inline cost calculation which Nick introduced. Specifically, there are cost reductions for all constant-operand icmp instructions against an alloca, regardless of whether the alloca will in fact be elligible for SROA. That means we don't want to abort the icmp reduction computation when we abort the SROA reduction computation. That in turn frees us from the need to keep a separate worklist and defer the ICmp calculations. Use this new-found freedom and some judicious function boundaries to factor the innards of computing the cost factor of any given instruction out of the loop over the instructions and into static helper functions. This greatly simplifies the code, and hopefully makes it more clear what is happening here. Reviewed by Eric Christopher. There is some concern that we'd like to ensure this doesn't get out of hand, and I plan to benchmark the effects of this change over the next few days along with some further fixes to the inline cost. llvm-svn: 152368
2012-03-09 10:49:36 +08:00
; still want to detect that the icmp and branch *can* be handled.
define void @inner4(i32 *%ptr, i32 %A) {
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%B = getelementptr inbounds i32, i32* %ptr, i32 %A
Clean up the naming in this test. Someone pointed this out in review at one point, and I forgot to go back and clean it up. Sorry about that. =/ llvm-svn: 153801
2012-03-31 18:38:48 +08:00
%C = icmp eq i32* %ptr, null
br i1 %C, label %bb.true, label %bb.false
Undo a previous restriction on the inline cost calculation which Nick introduced. Specifically, there are cost reductions for all constant-operand icmp instructions against an alloca, regardless of whether the alloca will in fact be elligible for SROA. That means we don't want to abort the icmp reduction computation when we abort the SROA reduction computation. That in turn frees us from the need to keep a separate worklist and defer the ICmp calculations. Use this new-found freedom and some judicious function boundaries to factor the innards of computing the cost factor of any given instruction out of the loop over the instructions and into static helper functions. This greatly simplifies the code, and hopefully makes it more clear what is happening here. Reviewed by Eric Christopher. There is some concern that we'd like to ensure this doesn't get out of hand, and I plan to benchmark the effects of this change over the next few days along with some further fixes to the inline cost. llvm-svn: 152368
2012-03-09 10:49:36 +08:00
bb.true:
; This block musn't be counted in the inline cost.
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%t1 = load i32, i32* %ptr
Undo a previous restriction on the inline cost calculation which Nick introduced. Specifically, there are cost reductions for all constant-operand icmp instructions against an alloca, regardless of whether the alloca will in fact be elligible for SROA. That means we don't want to abort the icmp reduction computation when we abort the SROA reduction computation. That in turn frees us from the need to keep a separate worklist and defer the ICmp calculations. Use this new-found freedom and some judicious function boundaries to factor the innards of computing the cost factor of any given instruction out of the loop over the instructions and into static helper functions. This greatly simplifies the code, and hopefully makes it more clear what is happening here. Reviewed by Eric Christopher. There is some concern that we'd like to ensure this doesn't get out of hand, and I plan to benchmark the effects of this change over the next few days along with some further fixes to the inline cost. llvm-svn: 152368
2012-03-09 10:49:36 +08:00
%t2 = add i32 %t1, 1
%t3 = add i32 %t2, 1
%t4 = add i32 %t3, 1
%t5 = add i32 %t4, 1
%t6 = add i32 %t5, 1
%t7 = add i32 %t6, 1
%t8 = add i32 %t7, 1
%t9 = add i32 %t8, 1
%t10 = add i32 %t9, 1
%t11 = add i32 %t10, 1
%t12 = add i32 %t11, 1
%t13 = add i32 %t12, 1
%t14 = add i32 %t13, 1
%t15 = add i32 %t14, 1
%t16 = add i32 %t15, 1
%t17 = add i32 %t16, 1
%t18 = add i32 %t17, 1
%t19 = add i32 %t18, 1
%t20 = add i32 %t19, 1
ret void
bb.false:
ret void
}
Initial commit for the rewrite of the inline cost analysis to operate on a per-callsite walk of the called function's instructions, in breadth-first order over the potentially reachable set of basic blocks. This is a major shift in how inline cost analysis works to improve the accuracy and rationality of inlining decisions. A brief outline of the algorithm this moves to: - Build a simplification mapping based on the callsite arguments to the function arguments. - Push the entry block onto a worklist of potentially-live basic blocks. - Pop the first block off of the *front* of the worklist (for breadth-first ordering) and walk its instructions using a custom InstVisitor. - For each instruction's operands, re-map them based on the simplification mappings available for the given callsite. - Compute any simplification possible of the instruction after re-mapping, and store that back int othe simplification mapping. - Compute any bonuses, costs, or other impacts of the instruction on the cost metric. - When the terminator is reached, replace any conditional value in the terminator with any simplifications from the mapping we have, and add any successors which are not proven to be dead from these simplifications to the worklist. - Pop the next block off of the front of the worklist, and repeat. - As soon as the cost of inlining exceeds the threshold for the callsite, stop analyzing the function in order to bound cost. The primary goal of this algorithm is to perfectly handle dead code paths. We do not want any code in trivially dead code paths to impact inlining decisions. The previous metric was *extremely* flawed here, and would always subtract the average cost of two successors of a conditional branch when it was proven to become an unconditional branch at the callsite. There was no handling of wildly different costs between the two successors, which would cause inlining when the path actually taken was too large, and no inlining when the path actually taken was trivially simple. There was also no handling of the code *path*, only the immediate successors. These problems vanish completely now. See the added regression tests for the shiny new features -- we skip recursive function calls, SROA-killing instructions, and high cost complex CFG structures when dead at the callsite being analyzed. Switching to this algorithm required refactoring the inline cost interface to accept the actual threshold rather than simply returning a single cost. The resulting interface is pretty bad, and I'm planning to do lots of interface cleanup after this patch. Several other refactorings fell out of this, but I've tried to minimize them for this patch. =/ There is still more cleanup that can be done here. Please point out anything that you see in review. I've worked really hard to try to mirror at least the spirit of all of the previous heuristics in the new model. It's not clear that they are all correct any more, but I wanted to minimize the change in this single patch, it's already a bit ridiculous. One heuristic that is *not* yet mirrored is to allow inlining of functions with a dynamic alloca *if* the caller has a dynamic alloca. I will add this back, but I think the most reasonable way requires changes to the inliner itself rather than just the cost metric, and so I've deferred this for a subsequent patch. The test case is XFAIL-ed until then. As mentioned in the review mail, this seems to make Clang run about 1% to 2% faster in -O0, but makes its binary size grow by just under 4%. I've looked into the 4% growth, and it can be fixed, but requires changes to other parts of the inliner. llvm-svn: 153812
2012-03-31 20:42:41 +08:00
define void @outer5() {
Update Transforms tests to use CHECK-LABEL for easier debugging. No functionality change. This update was done with the following bash script: find test/Transforms -name "*.ll" | \ while read NAME; do echo "$NAME" if ! grep -q "^; *RUN: *llc" $NAME; then TEMP=`mktemp -t temp` cp $NAME $TEMP sed -n "s/^define [^@]*@\([A-Za-z0-9_]*\)(.*$/\1/p" < $NAME | \ while read FUNC; do sed -i '' "s/;\(.*\)\([A-Za-z0-9_]*\):\( *\)@$FUNC\([( ]*\)\$/;\1\2-LABEL:\3@$FUNC(/g" $TEMP done mv $TEMP $NAME fi done llvm-svn: 186268
2013-07-14 09:42:54 +08:00
; CHECK-LABEL: @outer5(
Initial commit for the rewrite of the inline cost analysis to operate on a per-callsite walk of the called function's instructions, in breadth-first order over the potentially reachable set of basic blocks. This is a major shift in how inline cost analysis works to improve the accuracy and rationality of inlining decisions. A brief outline of the algorithm this moves to: - Build a simplification mapping based on the callsite arguments to the function arguments. - Push the entry block onto a worklist of potentially-live basic blocks. - Pop the first block off of the *front* of the worklist (for breadth-first ordering) and walk its instructions using a custom InstVisitor. - For each instruction's operands, re-map them based on the simplification mappings available for the given callsite. - Compute any simplification possible of the instruction after re-mapping, and store that back int othe simplification mapping. - Compute any bonuses, costs, or other impacts of the instruction on the cost metric. - When the terminator is reached, replace any conditional value in the terminator with any simplifications from the mapping we have, and add any successors which are not proven to be dead from these simplifications to the worklist. - Pop the next block off of the front of the worklist, and repeat. - As soon as the cost of inlining exceeds the threshold for the callsite, stop analyzing the function in order to bound cost. The primary goal of this algorithm is to perfectly handle dead code paths. We do not want any code in trivially dead code paths to impact inlining decisions. The previous metric was *extremely* flawed here, and would always subtract the average cost of two successors of a conditional branch when it was proven to become an unconditional branch at the callsite. There was no handling of wildly different costs between the two successors, which would cause inlining when the path actually taken was too large, and no inlining when the path actually taken was trivially simple. There was also no handling of the code *path*, only the immediate successors. These problems vanish completely now. See the added regression tests for the shiny new features -- we skip recursive function calls, SROA-killing instructions, and high cost complex CFG structures when dead at the callsite being analyzed. Switching to this algorithm required refactoring the inline cost interface to accept the actual threshold rather than simply returning a single cost. The resulting interface is pretty bad, and I'm planning to do lots of interface cleanup after this patch. Several other refactorings fell out of this, but I've tried to minimize them for this patch. =/ There is still more cleanup that can be done here. Please point out anything that you see in review. I've worked really hard to try to mirror at least the spirit of all of the previous heuristics in the new model. It's not clear that they are all correct any more, but I wanted to minimize the change in this single patch, it's already a bit ridiculous. One heuristic that is *not* yet mirrored is to allow inlining of functions with a dynamic alloca *if* the caller has a dynamic alloca. I will add this back, but I think the most reasonable way requires changes to the inliner itself rather than just the cost metric, and so I've deferred this for a subsequent patch. The test case is XFAIL-ed until then. As mentioned in the review mail, this seems to make Clang run about 1% to 2% faster in -O0, but makes its binary size grow by just under 4%. I've looked into the 4% growth, and it can be fixed, but requires changes to other parts of the inliner. llvm-svn: 153812
2012-03-31 20:42:41 +08:00
; CHECK-NOT: call void @inner5
%ptr = alloca i32
call void @inner5(i1 false, i32* %ptr)
ret void
}
; %D poisons this call, scalar-repl can't handle that instruction. However, if
; the flag is set appropriately, the poisoning instruction is inside of dead
; code, and so shouldn't be counted.
define void @inner5(i1 %flag, i32 *%ptr) {
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction Essentially the same as the GEP change in r230786. A similar migration script can be used to update test cases, though a few more test case improvements/changes were required this time around: (r229269-r229278) import fileinput import sys import re pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)") for line in sys.stdin: sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line)) Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7649 llvm-svn: 230794
2015-02-28 05:17:42 +08:00
%A = load i32, i32* %ptr
Initial commit for the rewrite of the inline cost analysis to operate on a per-callsite walk of the called function's instructions, in breadth-first order over the potentially reachable set of basic blocks. This is a major shift in how inline cost analysis works to improve the accuracy and rationality of inlining decisions. A brief outline of the algorithm this moves to: - Build a simplification mapping based on the callsite arguments to the function arguments. - Push the entry block onto a worklist of potentially-live basic blocks. - Pop the first block off of the *front* of the worklist (for breadth-first ordering) and walk its instructions using a custom InstVisitor. - For each instruction's operands, re-map them based on the simplification mappings available for the given callsite. - Compute any simplification possible of the instruction after re-mapping, and store that back int othe simplification mapping. - Compute any bonuses, costs, or other impacts of the instruction on the cost metric. - When the terminator is reached, replace any conditional value in the terminator with any simplifications from the mapping we have, and add any successors which are not proven to be dead from these simplifications to the worklist. - Pop the next block off of the front of the worklist, and repeat. - As soon as the cost of inlining exceeds the threshold for the callsite, stop analyzing the function in order to bound cost. The primary goal of this algorithm is to perfectly handle dead code paths. We do not want any code in trivially dead code paths to impact inlining decisions. The previous metric was *extremely* flawed here, and would always subtract the average cost of two successors of a conditional branch when it was proven to become an unconditional branch at the callsite. There was no handling of wildly different costs between the two successors, which would cause inlining when the path actually taken was too large, and no inlining when the path actually taken was trivially simple. There was also no handling of the code *path*, only the immediate successors. These problems vanish completely now. See the added regression tests for the shiny new features -- we skip recursive function calls, SROA-killing instructions, and high cost complex CFG structures when dead at the callsite being analyzed. Switching to this algorithm required refactoring the inline cost interface to accept the actual threshold rather than simply returning a single cost. The resulting interface is pretty bad, and I'm planning to do lots of interface cleanup after this patch. Several other refactorings fell out of this, but I've tried to minimize them for this patch. =/ There is still more cleanup that can be done here. Please point out anything that you see in review. I've worked really hard to try to mirror at least the spirit of all of the previous heuristics in the new model. It's not clear that they are all correct any more, but I wanted to minimize the change in this single patch, it's already a bit ridiculous. One heuristic that is *not* yet mirrored is to allow inlining of functions with a dynamic alloca *if* the caller has a dynamic alloca. I will add this back, but I think the most reasonable way requires changes to the inliner itself rather than just the cost metric, and so I've deferred this for a subsequent patch. The test case is XFAIL-ed until then. As mentioned in the review mail, this seems to make Clang run about 1% to 2% faster in -O0, but makes its binary size grow by just under 4%. I've looked into the 4% growth, and it can be fixed, but requires changes to other parts of the inliner. llvm-svn: 153812
2012-03-31 20:42:41 +08:00
store i32 0, i32* %ptr
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%C = getelementptr inbounds i32, i32* %ptr, i32 0
Initial commit for the rewrite of the inline cost analysis to operate on a per-callsite walk of the called function's instructions, in breadth-first order over the potentially reachable set of basic blocks. This is a major shift in how inline cost analysis works to improve the accuracy and rationality of inlining decisions. A brief outline of the algorithm this moves to: - Build a simplification mapping based on the callsite arguments to the function arguments. - Push the entry block onto a worklist of potentially-live basic blocks. - Pop the first block off of the *front* of the worklist (for breadth-first ordering) and walk its instructions using a custom InstVisitor. - For each instruction's operands, re-map them based on the simplification mappings available for the given callsite. - Compute any simplification possible of the instruction after re-mapping, and store that back int othe simplification mapping. - Compute any bonuses, costs, or other impacts of the instruction on the cost metric. - When the terminator is reached, replace any conditional value in the terminator with any simplifications from the mapping we have, and add any successors which are not proven to be dead from these simplifications to the worklist. - Pop the next block off of the front of the worklist, and repeat. - As soon as the cost of inlining exceeds the threshold for the callsite, stop analyzing the function in order to bound cost. The primary goal of this algorithm is to perfectly handle dead code paths. We do not want any code in trivially dead code paths to impact inlining decisions. The previous metric was *extremely* flawed here, and would always subtract the average cost of two successors of a conditional branch when it was proven to become an unconditional branch at the callsite. There was no handling of wildly different costs between the two successors, which would cause inlining when the path actually taken was too large, and no inlining when the path actually taken was trivially simple. There was also no handling of the code *path*, only the immediate successors. These problems vanish completely now. See the added regression tests for the shiny new features -- we skip recursive function calls, SROA-killing instructions, and high cost complex CFG structures when dead at the callsite being analyzed. Switching to this algorithm required refactoring the inline cost interface to accept the actual threshold rather than simply returning a single cost. The resulting interface is pretty bad, and I'm planning to do lots of interface cleanup after this patch. Several other refactorings fell out of this, but I've tried to minimize them for this patch. =/ There is still more cleanup that can be done here. Please point out anything that you see in review. I've worked really hard to try to mirror at least the spirit of all of the previous heuristics in the new model. It's not clear that they are all correct any more, but I wanted to minimize the change in this single patch, it's already a bit ridiculous. One heuristic that is *not* yet mirrored is to allow inlining of functions with a dynamic alloca *if* the caller has a dynamic alloca. I will add this back, but I think the most reasonable way requires changes to the inliner itself rather than just the cost metric, and so I've deferred this for a subsequent patch. The test case is XFAIL-ed until then. As mentioned in the review mail, this seems to make Clang run about 1% to 2% faster in -O0, but makes its binary size grow by just under 4%. I've looked into the 4% growth, and it can be fixed, but requires changes to other parts of the inliner. llvm-svn: 153812
2012-03-31 20:42:41 +08:00
br i1 %flag, label %if.then, label %exit
if.then:
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction One of several parallel first steps to remove the target type of pointers, replacing them with a single opaque pointer type. This adds an explicit type parameter to the gep instruction so that when the first parameter becomes an opaque pointer type, the type to gep through is still available to the instructions. * This doesn't modify gep operators, only instructions (operators will be handled separately) * Textual IR changes only. Bitcode (including upgrade) and changing the in-memory representation will be in separate changes. * geps of vectors are transformed as: getelementptr <4 x float*> %x, ... ->getelementptr float, <4 x float*> %x, ... Then, once the opaque pointer type is introduced, this will ultimately look like: getelementptr float, <4 x ptr> %x with the unambiguous interpretation that it is a vector of pointers to float. * address spaces remain on the pointer, not the type: getelementptr float addrspace(1)* %x ->getelementptr float, float addrspace(1)* %x Then, eventually: getelementptr float, ptr addrspace(1) %x Importantly, the massive amount of test case churn has been automated by same crappy python code. I had to manually update a few test cases that wouldn't fit the script's model (r228970,r229196,r229197,r229198). The python script just massages stdin and writes the result to stdout, I then wrapped that in a shell script to handle replacing files, then using the usual find+xargs to migrate all the files. update.py: import fileinput import sys import re ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))") def conv(match, line): if not match: return line line = match.groups()[0] if len(match.groups()[5]) == 0: line += match.groups()[2] line += match.groups()[3] line += ", " line += match.groups()[1] line += "\n" return line for line in sys.stdin: if line.find("getelementptr ") == line.find("getelementptr inbounds"): if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("): line = conv(re.match(ibrep, line), line) elif line.find("getelementptr ") != line.find("getelementptr ("): line = conv(re.match(normrep, line), line) sys.stdout.write(line) apply.sh: for name in "$@" do python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name" rm -f "$name.tmp" done The actual commands: From llvm/src: find test/ -name *.ll | xargs ./apply.sh From llvm/src/tools/clang: find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}" From llvm/src/tools/polly: find test/ -name *.ll | xargs ./apply.sh After that, check-all (with llvm, clang, clang-tools-extra, lld, compiler-rt, and polly all checked out). The extra 'rm' in the apply.sh script is due to a few files in clang's test suite using interesting unicode stuff that my python script was throwing exceptions on. None of those files needed to be migrated, so it seemed sufficient to ignore those cases. Reviewers: rafael, dexonsmith, grosser Differential Revision: http://reviews.llvm.org/D7636 llvm-svn: 230786
2015-02-28 03:29:02 +08:00
%D = getelementptr inbounds i32, i32* %ptr, i32 %A
Initial commit for the rewrite of the inline cost analysis to operate on a per-callsite walk of the called function's instructions, in breadth-first order over the potentially reachable set of basic blocks. This is a major shift in how inline cost analysis works to improve the accuracy and rationality of inlining decisions. A brief outline of the algorithm this moves to: - Build a simplification mapping based on the callsite arguments to the function arguments. - Push the entry block onto a worklist of potentially-live basic blocks. - Pop the first block off of the *front* of the worklist (for breadth-first ordering) and walk its instructions using a custom InstVisitor. - For each instruction's operands, re-map them based on the simplification mappings available for the given callsite. - Compute any simplification possible of the instruction after re-mapping, and store that back int othe simplification mapping. - Compute any bonuses, costs, or other impacts of the instruction on the cost metric. - When the terminator is reached, replace any conditional value in the terminator with any simplifications from the mapping we have, and add any successors which are not proven to be dead from these simplifications to the worklist. - Pop the next block off of the front of the worklist, and repeat. - As soon as the cost of inlining exceeds the threshold for the callsite, stop analyzing the function in order to bound cost. The primary goal of this algorithm is to perfectly handle dead code paths. We do not want any code in trivially dead code paths to impact inlining decisions. The previous metric was *extremely* flawed here, and would always subtract the average cost of two successors of a conditional branch when it was proven to become an unconditional branch at the callsite. There was no handling of wildly different costs between the two successors, which would cause inlining when the path actually taken was too large, and no inlining when the path actually taken was trivially simple. There was also no handling of the code *path*, only the immediate successors. These problems vanish completely now. See the added regression tests for the shiny new features -- we skip recursive function calls, SROA-killing instructions, and high cost complex CFG structures when dead at the callsite being analyzed. Switching to this algorithm required refactoring the inline cost interface to accept the actual threshold rather than simply returning a single cost. The resulting interface is pretty bad, and I'm planning to do lots of interface cleanup after this patch. Several other refactorings fell out of this, but I've tried to minimize them for this patch. =/ There is still more cleanup that can be done here. Please point out anything that you see in review. I've worked really hard to try to mirror at least the spirit of all of the previous heuristics in the new model. It's not clear that they are all correct any more, but I wanted to minimize the change in this single patch, it's already a bit ridiculous. One heuristic that is *not* yet mirrored is to allow inlining of functions with a dynamic alloca *if* the caller has a dynamic alloca. I will add this back, but I think the most reasonable way requires changes to the inliner itself rather than just the cost metric, and so I've deferred this for a subsequent patch. The test case is XFAIL-ed until then. As mentioned in the review mail, this seems to make Clang run about 1% to 2% faster in -O0, but makes its binary size grow by just under 4%. I've looked into the 4% growth, and it can be fixed, but requires changes to other parts of the inliner. llvm-svn: 153812
2012-03-31 20:42:41 +08:00
%E = bitcast i32* %ptr to i8*
%F = select i1 false, i32* %ptr, i32* @glbl
call void @llvm.lifetime.start(i64 0, i8* %E)
ret void
exit:
ret void
}