llvm-project/llvm/test/CodeGen/X86/push-cfi.ll

Ignoring revisions in .git-blame-ignore-revs. Click here to bypass and see the normal blame view.

293 lines
8.1 KiB
LLVM
Raw Normal View History

; RUN: llc < %s -mtriple=i686-pc-linux | FileCheck %s -check-prefix=LINUX -check-prefix=CHECK
; RUN: llc < %s -mtriple=i686-apple-darwin | FileCheck %s -check-prefix=DARWIN -check-prefix=CHECK
declare i32 @__gxx_personality_v0(...)
declare void @good(i32 %a, i32 %b, i32 %c, i32 %d)
declare void @large(i32 %a, i32 %b, i32 %c, i32 %d, i32 %e, i32 %f)
declare void @empty()
; When we use an invoke, we expect a .cfi_escape GNU_ARGS_SIZE
; with size 16 before the invocation. Without FP, we also expect
; .cfi_adjust_cfa_offset after each push.
; Darwin should not generate pushes in either circumstance.
; CHECK-LABEL: test1_nofp:
; LINUX: .cfi_escape 0x2e, 0x10
; LINUX-NEXT: pushl $4
; LINUX-NEXT: .cfi_adjust_cfa_offset 4
; LINUX-NEXT: pushl $3
; LINUX-NEXT: .cfi_adjust_cfa_offset 4
; LINUX-NEXT: pushl $2
; LINUX-NEXT: .cfi_adjust_cfa_offset 4
; LINUX-NEXT: pushl $1
; LINUX-NEXT: .cfi_adjust_cfa_offset 4
; LINUX-NEXT: call
; LINUX-NEXT: addl $16, %esp
; LINUX: .cfi_adjust_cfa_offset -16
; DARWIN-NOT: .cfi_escape
; DARWIN-NOT: pushl
define void @test1_nofp() #0 personality i8* bitcast (i32 (...)* @__gxx_personality_v0 to i8*) {
entry:
invoke void @good(i32 1, i32 2, i32 3, i32 4)
to label %continue unwind label %cleanup
continue:
ret void
cleanup:
landingpad { i8*, i32 }
cleanup
ret void
}
; CHECK-LABEL: test1_fp:
; LINUX: .cfi_escape 0x2e, 0x10
; LINUX-NEXT: pushl $4
; LINUX-NEXT: pushl $3
; LINUX-NEXT: pushl $2
; LINUX-NEXT: pushl $1
; LINUX-NEXT: call
; LINUX-NEXT: addl $16, %esp
; DARWIN: pushl %ebp
; DARWIN-NOT: .cfi_escape
; DARWIN-NOT: pushl
define void @test1_fp() #1 personality i8* bitcast (i32 (...)* @__gxx_personality_v0 to i8*) {
entry:
invoke void @good(i32 1, i32 2, i32 3, i32 4)
to label %continue unwind label %cleanup
continue:
ret void
cleanup:
landingpad { i8*, i32 }
cleanup
ret void
}
; If the function has no handlers, we don't need to generate GNU_ARGS_SIZE,
; even if it has an unwind table. Without FP, we still need cfi_adjust_cfa_offset,
; so darwin should not generate pushes.
; CHECK-LABEL: test2_nofp:
; LINUX-NOT: .cfi_escape
; LINUX: pushl $4
; LINUX-NEXT: .cfi_adjust_cfa_offset 4
; LINUX-NEXT: pushl $3
; LINUX-NEXT: .cfi_adjust_cfa_offset 4
; LINUX-NEXT: pushl $2
; LINUX-NEXT: .cfi_adjust_cfa_offset 4
; LINUX-NEXT: pushl $1
; LINUX-NEXT: .cfi_adjust_cfa_offset 4
; LINUX-NEXT: call
; LINUX-NEXT: addl $28, %esp
Correct dwarf unwind information in function epilogue This patch aims to provide correct dwarf unwind information in function epilogue for X86. It consists of two parts. The first part inserts CFI instructions that set appropriate cfa offset and cfa register in emitEpilogue() in X86FrameLowering. This part is X86 specific. The second part is platform independent and ensures that: * CFI instructions do not affect code generation (they are not counted as instructions when tail duplicating or tail merging) * Unwind information remains correct when a function is modified by different passes. This is done in a late pass by analyzing information about cfa offset and cfa register in BBs and inserting additional CFI directives where necessary. Added CFIInstrInserter pass: * analyzes each basic block to determine cfa offset and register are valid at its entry and exit * verifies that outgoing cfa offset and register of predecessor blocks match incoming values of their successors * inserts additional CFI directives at basic block beginning to correct the rule for calculating CFA Having CFI instructions in function epilogue can cause incorrect CFA calculation rule for some basic blocks. This can happen if, due to basic block reordering, or the existence of multiple epilogue blocks, some of the blocks have wrong cfa offset and register values set by the epilogue block above them. CFIInstrInserter is currently run only on X86, but can be used by any target that implements support for adding CFI instructions in epilogue. Patch by Violeta Vukobrat. Differential Revision: https://reviews.llvm.org/D42848 llvm-svn: 330706
2018-04-24 18:32:08 +08:00
; LINUX: .cfi_adjust_cfa_offset -28
; DARWIN-NOT: .cfi_escape
; DARWIN-NOT: pushl
define void @test2_nofp() #0 personality i8* bitcast (i32 (...)* @__gxx_personality_v0 to i8*) {
entry:
call void @good(i32 1, i32 2, i32 3, i32 4)
ret void
}
; CHECK-LABEL: test2_fp:
; CHECK-NOT: .cfi_escape
; CHECK-NOT: .cfi_adjust_cfa_offset
; CHECK: pushl $4
; CHECK-NEXT: pushl $3
; CHECK-NEXT: pushl $2
; CHECK-NEXT: pushl $1
; CHECK-NEXT: call
; CHECK-NEXT: addl $24, %esp
define void @test2_fp() #1 personality i8* bitcast (i32 (...)* @__gxx_personality_v0 to i8*) {
entry:
call void @good(i32 1, i32 2, i32 3, i32 4)
ret void
}
; If we did not end up using any pushes, no need for GNU_ARGS_SIZE or
; cfi_adjust_cfa_offset.
; CHECK-LABEL: test3_nofp:
; LINUX-NOT: .cfi_escape
; LINUX-NOT: .cfi_adjust_cfa_offset
; LINUX-NOT: pushl
; LINUX: retl
define void @test3_nofp() #0 personality i8* bitcast (i32 (...)* @__gxx_personality_v0 to i8*) {
entry:
invoke void @empty()
to label %continue unwind label %cleanup
continue:
ret void
cleanup:
landingpad { i8*, i32 }
cleanup
ret void
}
; If we did not end up using any pushes, no need for GNU_ARGS_SIZE or
; cfi_adjust_cfa_offset.
; CHECK-LABEL: test3_fp:
; LINUX: pushl %ebp
; LINUX-NOT: .cfi_escape
; LINUX-NOT: .cfi_adjust_cfa_offset
; LINUX-NOT: pushl
; LINUX: retl
define void @test3_fp() #1 personality i8* bitcast (i32 (...)* @__gxx_personality_v0 to i8*) {
entry:
invoke void @empty()
to label %continue unwind label %cleanup
continue:
ret void
cleanup:
landingpad { i8*, i32 }
cleanup
ret void
}
; Different sized stacks need different GNU_ARGS_SIZEs
; CHECK-LABEL: test4:
; LINUX: .cfi_escape 0x2e, 0x10
; LINUX-NEXT: pushl $4
; LINUX-NEXT: pushl $3
; LINUX-NEXT: pushl $2
; LINUX-NEXT: pushl $1
; LINUX-NEXT: call
; LINUX-NEXT: addl $16, %esp
; LINUX: .cfi_escape 0x2e, 0x20
; LINUX: subl $8, %esp
; LINUX-NEXT: pushl $11
; LINUX-NEXT: pushl $10
; LINUX-NEXT: pushl $9
; LINUX-NEXT: pushl $8
; LINUX-NEXT: pushl $7
; LINUX-NEXT: pushl $6
; LINUX-NEXT: calll large
; LINUX-NEXT: addl $32, %esp
define void @test4() #1 personality i8* bitcast (i32 (...)* @__gxx_personality_v0 to i8*) {
entry:
invoke void @good(i32 1, i32 2, i32 3, i32 4)
to label %continue1 unwind label %cleanup
continue1:
invoke void @large(i32 6, i32 7, i32 8, i32 9, i32 10, i32 11)
to label %continue2 unwind label %cleanup
continue2:
ret void
cleanup:
landingpad { i8*, i32 }
cleanup
ret void
}
; If we did use pushes, we need to reset GNU_ARGS_SIZE before a call
; without parameters, but don't need to adjust the cfa offset
; CHECK-LABEL: test5_nofp:
; LINUX: .cfi_escape 0x2e, 0x10
; LINUX-NEXT: pushl $4
; LINUX-NEXT: .cfi_adjust_cfa_offset 4
; LINUX-NEXT: pushl $3
; LINUX-NEXT: .cfi_adjust_cfa_offset 4
; LINUX-NEXT: pushl $2
; LINUX-NEXT: .cfi_adjust_cfa_offset 4
; LINUX-NEXT: pushl $1
; LINUX-NEXT: .cfi_adjust_cfa_offset 4
; LINUX-NEXT: call
; LINUX-NEXT: addl $16, %esp
; LINUX: .cfi_adjust_cfa_offset -16
; LINUX-NOT: .cfi_adjust_cfa_offset
; LINUX: .cfi_escape 0x2e, 0x00
; LINUX-NOT: .cfi_adjust_cfa_offset
; LINUX: call
define void @test5_nofp() #0 personality i8* bitcast (i32 (...)* @__gxx_personality_v0 to i8*) {
entry:
invoke void @good(i32 1, i32 2, i32 3, i32 4)
to label %continue1 unwind label %cleanup
continue1:
invoke void @empty()
to label %continue2 unwind label %cleanup
continue2:
ret void
cleanup:
landingpad { i8*, i32 }
cleanup
ret void
}
; CHECK-LABEL: test5_fp:
; LINUX: .cfi_escape 0x2e, 0x10
; LINUX-NEXT: pushl $4
; LINUX-NEXT: pushl $3
; LINUX-NEXT: pushl $2
; LINUX-NEXT: pushl $1
; LINUX-NEXT: call
; LINUX-NEXT: addl $16, %esp
; LINUX: .cfi_escape 0x2e, 0x00
; LINUX-NOT: .cfi_adjust_cfa_offset
; LINUX: call
define void @test5_fp() #1 personality i8* bitcast (i32 (...)* @__gxx_personality_v0 to i8*) {
entry:
invoke void @good(i32 1, i32 2, i32 3, i32 4)
to label %continue1 unwind label %cleanup
continue1:
invoke void @empty()
to label %continue2 unwind label %cleanup
continue2:
ret void
cleanup:
landingpad { i8*, i32 }
cleanup
ret void
}
; FIXME: This is actually inefficient - we don't need to repeat the .cfi_escape twice.
; CHECK-LABEL: test6:
; LINUX: .cfi_escape 0x2e, 0x10
; LINUX: call
; LINUX: .cfi_escape 0x2e, 0x10
; LINUX: call
define void @test6() #1 personality i8* bitcast (i32 (...)* @__gxx_personality_v0 to i8*) {
entry:
invoke void @good(i32 1, i32 2, i32 3, i32 4)
to label %continue1 unwind label %cleanup
continue1:
invoke void @good(i32 5, i32 6, i32 7, i32 8)
to label %continue2 unwind label %cleanup
continue2:
ret void
cleanup:
landingpad { i8*, i32 }
cleanup
ret void
}
; Darwin should generate pushes in the presense of FP and an unwind table,
; but not FP and invoke.
; CHECK-LABEL: test7:
; DARWIN: pushl %ebp
; DARWIN: movl %esp, %ebp
; DARWIN: .cfi_def_cfa_register %ebp
; DARWIN-NOT: .cfi_adjust_cfa_offset
; DARWIN: pushl $4
; DARWIN-NEXT: pushl $3
; DARWIN-NEXT: pushl $2
; DARWIN-NEXT: pushl $1
; DARWIN-NEXT: call
define void @test7() #1 personality i8* bitcast (i32 (...)* @__gxx_personality_v0 to i8*) {
entry:
call void @good(i32 1, i32 2, i32 3, i32 4)
ret void
}
; CHECK-LABEL: test8:
; DARWIN: pushl %ebp
; DARWIN: movl %esp, %ebp
; DARWIN-NOT: .cfi_adjust_cfa_offset
; DARWIN-NOT: pushl
define void @test8() #1 personality i8* bitcast (i32 (...)* @__gxx_personality_v0 to i8*) {
entry:
invoke void @good(i32 1, i32 2, i32 3, i32 4)
to label %continue unwind label %cleanup
continue:
ret void
cleanup:
landingpad { i8*, i32 }
cleanup
ret void
}
attributes #0 = { optsize }
attributes #1 = { optsize "frame-pointer"="all" }