[PPC32] Improve the 32-bit PowerPC port
Many -static/-no-pie/-shared/-pie applications linked against glibc or musl
should work with this patch. This also helps FreeBSD PowerPC64 to migrate
their lib32 (PR40888).
* Fix default image base and max page size.
* Support new-style Secure PLT (see below). Old-style BSS PLT is not
implemented, so it is not suitable for FreeBSD rtld now because it doesn't
support Secure PLT yet.
* Support more initial relocation types:
R_PPC_ADDR32, R_PPC_REL16*, R_PPC_LOCAL24PC, R_PPC_PLTREL24, and R_PPC_GOT16.
The addend of R_PPC_PLTREL24 is special: it decides the call stub PLT type
but it should be ignored for the computation of target symbol VA.
* Support GNU ifunc
* Support .glink used for lazy PLT resolution in glibc
* Add a new thunk type: PPC32PltCallStub that is similar to PPC64PltCallStub.
It is used by R_PPC_REL24 and R_PPC_PLTREL24.
A PLT stub used in -fPIE/-fPIC usually loads an address relative to
.got2+0x8000 (-fpie/-fpic code uses _GLOBAL_OFFSET_TABLE_ relative
addresses).
Two .got2 sections in two object files have different addresses, thus a PLT stub
can't be shared by two object files. To handle this incompatibility,
change the parameters of Thunk::isCompatibleWith to
`const InputSection &, const Relocation &`.
PowerPC psABI specified an old-style .plt (BSS PLT) that is both
writable and executable. Linkers don't make separate RW- and RWE segments,
which causes all initially writable memory (think .data) executable.
This is a big security concern so a new PLT scheme (secure PLT) was developed to
address the security issue.
TLS will be implemented in D62940.
glibc older than ~2012 requires .rela.dyn to include .rela.plt, it can
not handle the DT_RELA+DT_RELASZ == DT_JMPREL case correctly. A hack
(not included in this patch) in LinkerScript.cpp addOrphanSections() to
work around the issue:
if (Config->EMachine == EM_PPC) {
// Older glibc assumes .rela.dyn includes .rela.plt
Add(In.RelaDyn);
if (In.RelaPlt->isLive() && !In.RelaPlt->Parent)
In.RelaDyn->getParent()->addSection(In.RelaPlt);
}
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D62464
llvm-svn: 362721
2019-06-07 01:03:00 +08:00
|
|
|
# REQUIRES: ppc
|
|
|
|
|
# RUN: llvm-mc -filetype=obj -triple=powerpc %s -o %t.o
|
|
|
|
|
# RUN: echo '.globl f, g, h; f: g: h:' | llvm-mc -filetype=obj -triple=powerpc - -o %t1.o
|
|
|
|
|
# RUN: ld.lld -shared %t1.o -soname t1.so -o %t1.so
|
|
|
|
|
# RUN: echo 'bl f+0x8000@plt' | llvm-mc -filetype=obj -triple=powerpc - -o %t2.o
|
|
|
|
|
|
|
|
|
|
## Check we can create PLT entries for -fPIE or -fpie executable.
|
|
|
|
|
# RUN: ld.lld -pie %t.o %t1.so %t2.o -o %t
|
|
|
|
|
# RUN: llvm-readobj -r %t | FileCheck --check-prefix=RELOC %s
|
|
|
|
|
# RUN: llvm-readobj -d %t | FileCheck --check-prefix=DYN %s
|
|
|
|
|
# RUN: llvm-readelf -S %t | FileCheck --check-prefix=SEC %s
|
|
|
|
|
# RUN: llvm-readelf -x .plt %t | FileCheck --check-prefix=HEX %s
|
|
|
|
|
# RUN: llvm-objdump -d --no-show-raw-insn %t | FileCheck --check-prefixes=CHECK,PIE %s
|
|
|
|
|
|
|
|
|
|
## Check we can create PLT entries for -fPIC or -fpic DSO.
|
|
|
|
|
# RUN: ld.lld -shared %t.o %t1.so %t2.o -o %t
|
|
|
|
|
# RUN: llvm-readobj -r %t | FileCheck --check-prefix=RELOC %s
|
|
|
|
|
# RUN: llvm-objdump -d --no-show-raw-insn %t | FileCheck --check-prefixes=CHECK,SHARED %s
|
|
|
|
|
|
|
|
|
|
# RELOC: .rela.dyn {
|
|
|
|
|
# RELOC-NEXT: R_PPC_ADDR32 f 0x0
|
|
|
|
|
# RELOC-NEXT: R_PPC_ADDR32 g 0x0
|
|
|
|
|
# RELOC-NEXT: R_PPC_ADDR32 h 0x0
|
|
|
|
|
# RELOC-NEXT: }
|
|
|
|
|
# RELOC-NEXT: .rela.plt {
|
|
|
|
|
# RELOC-NEXT: R_PPC_JMP_SLOT f 0x0
|
|
|
|
|
# RELOC-NEXT: R_PPC_JMP_SLOT g 0x0
|
|
|
|
|
# RELOC-NEXT: R_PPC_JMP_SLOT h 0x0
|
|
|
|
|
# RELOC-NEXT: }
|
|
|
|
|
|
2019-12-15 08:19:03 +08:00
|
|
|
# SEC: .got PROGBITS 00020368
|
|
|
|
|
# DYN: PPC_GOT 0x20368
|
[PPC32] Improve the 32-bit PowerPC port
Many -static/-no-pie/-shared/-pie applications linked against glibc or musl
should work with this patch. This also helps FreeBSD PowerPC64 to migrate
their lib32 (PR40888).
* Fix default image base and max page size.
* Support new-style Secure PLT (see below). Old-style BSS PLT is not
implemented, so it is not suitable for FreeBSD rtld now because it doesn't
support Secure PLT yet.
* Support more initial relocation types:
R_PPC_ADDR32, R_PPC_REL16*, R_PPC_LOCAL24PC, R_PPC_PLTREL24, and R_PPC_GOT16.
The addend of R_PPC_PLTREL24 is special: it decides the call stub PLT type
but it should be ignored for the computation of target symbol VA.
* Support GNU ifunc
* Support .glink used for lazy PLT resolution in glibc
* Add a new thunk type: PPC32PltCallStub that is similar to PPC64PltCallStub.
It is used by R_PPC_REL24 and R_PPC_PLTREL24.
A PLT stub used in -fPIE/-fPIC usually loads an address relative to
.got2+0x8000 (-fpie/-fpic code uses _GLOBAL_OFFSET_TABLE_ relative
addresses).
Two .got2 sections in two object files have different addresses, thus a PLT stub
can't be shared by two object files. To handle this incompatibility,
change the parameters of Thunk::isCompatibleWith to
`const InputSection &, const Relocation &`.
PowerPC psABI specified an old-style .plt (BSS PLT) that is both
writable and executable. Linkers don't make separate RW- and RWE segments,
which causes all initially writable memory (think .data) executable.
This is a big security concern so a new PLT scheme (secure PLT) was developed to
address the security issue.
TLS will be implemented in D62940.
glibc older than ~2012 requires .rela.dyn to include .rela.plt, it can
not handle the DT_RELA+DT_RELASZ == DT_JMPREL case correctly. A hack
(not included in this patch) in LinkerScript.cpp addOrphanSections() to
work around the issue:
if (Config->EMachine == EM_PPC) {
// Older glibc assumes .rela.dyn includes .rela.plt
Add(In.RelaDyn);
if (In.RelaPlt->isLive() && !In.RelaPlt->Parent)
In.RelaDyn->getParent()->addSection(In.RelaPlt);
}
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D62464
llvm-svn: 362721
2019-06-07 01:03:00 +08:00
|
|
|
|
|
|
|
|
## .got2+0x8000-0x10004 = 0x30000+0x8000-0x10004 = 65536*2+32764
|
2020-03-06 06:18:38 +08:00
|
|
|
# CHECK-LABEL: <_start>:
|
2020-03-27 14:40:23 +08:00
|
|
|
# PIE-NEXT: bcl 20, 31, 0x10210
|
2019-08-20 17:20:05 +08:00
|
|
|
# PIE-NEXT: 10210: mflr 30
|
|
|
|
|
# PIE-NEXT: addis 30, 30, 3
|
2019-12-15 08:19:03 +08:00
|
|
|
# PIE-NEXT: addi 30, 30, -32412
|
[PPC32] Improve the 32-bit PowerPC port
Many -static/-no-pie/-shared/-pie applications linked against glibc or musl
should work with this patch. This also helps FreeBSD PowerPC64 to migrate
their lib32 (PR40888).
* Fix default image base and max page size.
* Support new-style Secure PLT (see below). Old-style BSS PLT is not
implemented, so it is not suitable for FreeBSD rtld now because it doesn't
support Secure PLT yet.
* Support more initial relocation types:
R_PPC_ADDR32, R_PPC_REL16*, R_PPC_LOCAL24PC, R_PPC_PLTREL24, and R_PPC_GOT16.
The addend of R_PPC_PLTREL24 is special: it decides the call stub PLT type
but it should be ignored for the computation of target symbol VA.
* Support GNU ifunc
* Support .glink used for lazy PLT resolution in glibc
* Add a new thunk type: PPC32PltCallStub that is similar to PPC64PltCallStub.
It is used by R_PPC_REL24 and R_PPC_PLTREL24.
A PLT stub used in -fPIE/-fPIC usually loads an address relative to
.got2+0x8000 (-fpie/-fpic code uses _GLOBAL_OFFSET_TABLE_ relative
addresses).
Two .got2 sections in two object files have different addresses, thus a PLT stub
can't be shared by two object files. To handle this incompatibility,
change the parameters of Thunk::isCompatibleWith to
`const InputSection &, const Relocation &`.
PowerPC psABI specified an old-style .plt (BSS PLT) that is both
writable and executable. Linkers don't make separate RW- and RWE segments,
which causes all initially writable memory (think .data) executable.
This is a big security concern so a new PLT scheme (secure PLT) was developed to
address the security issue.
TLS will be implemented in D62940.
glibc older than ~2012 requires .rela.dyn to include .rela.plt, it can
not handle the DT_RELA+DT_RELASZ == DT_JMPREL case correctly. A hack
(not included in this patch) in LinkerScript.cpp addOrphanSections() to
work around the issue:
if (Config->EMachine == EM_PPC) {
// Older glibc assumes .rela.dyn includes .rela.plt
Add(In.RelaDyn);
if (In.RelaPlt->isLive() && !In.RelaPlt->Parent)
In.RelaDyn->getParent()->addSection(In.RelaPlt);
}
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D62464
llvm-svn: 362721
2019-06-07 01:03:00 +08:00
|
|
|
## Two bl 00008000.got2.plt_pic32.f
|
2020-03-23 14:03:09 +08:00
|
|
|
# PIE-NEXT: bl 0x10244
|
|
|
|
|
# PIE-NEXT: bl 0x10244
|
[PPC32] Improve the 32-bit PowerPC port
Many -static/-no-pie/-shared/-pie applications linked against glibc or musl
should work with this patch. This also helps FreeBSD PowerPC64 to migrate
their lib32 (PR40888).
* Fix default image base and max page size.
* Support new-style Secure PLT (see below). Old-style BSS PLT is not
implemented, so it is not suitable for FreeBSD rtld now because it doesn't
support Secure PLT yet.
* Support more initial relocation types:
R_PPC_ADDR32, R_PPC_REL16*, R_PPC_LOCAL24PC, R_PPC_PLTREL24, and R_PPC_GOT16.
The addend of R_PPC_PLTREL24 is special: it decides the call stub PLT type
but it should be ignored for the computation of target symbol VA.
* Support GNU ifunc
* Support .glink used for lazy PLT resolution in glibc
* Add a new thunk type: PPC32PltCallStub that is similar to PPC64PltCallStub.
It is used by R_PPC_REL24 and R_PPC_PLTREL24.
A PLT stub used in -fPIE/-fPIC usually loads an address relative to
.got2+0x8000 (-fpie/-fpic code uses _GLOBAL_OFFSET_TABLE_ relative
addresses).
Two .got2 sections in two object files have different addresses, thus a PLT stub
can't be shared by two object files. To handle this incompatibility,
change the parameters of Thunk::isCompatibleWith to
`const InputSection &, const Relocation &`.
PowerPC psABI specified an old-style .plt (BSS PLT) that is both
writable and executable. Linkers don't make separate RW- and RWE segments,
which causes all initially writable memory (think .data) executable.
This is a big security concern so a new PLT scheme (secure PLT) was developed to
address the security issue.
TLS will be implemented in D62940.
glibc older than ~2012 requires .rela.dyn to include .rela.plt, it can
not handle the DT_RELA+DT_RELASZ == DT_JMPREL case correctly. A hack
(not included in this patch) in LinkerScript.cpp addOrphanSections() to
work around the issue:
if (Config->EMachine == EM_PPC) {
// Older glibc assumes .rela.dyn includes .rela.plt
Add(In.RelaDyn);
if (In.RelaPlt->isLive() && !In.RelaPlt->Parent)
In.RelaDyn->getParent()->addSection(In.RelaPlt);
}
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D62464
llvm-svn: 362721
2019-06-07 01:03:00 +08:00
|
|
|
## Two bl 00008000.got2.plt_pic32.g
|
2020-03-23 14:03:09 +08:00
|
|
|
# PIE-NEXT: bl 0x10254
|
|
|
|
|
# PIE-NEXT: bl 0x10254
|
[PPC32] Improve the 32-bit PowerPC port
Many -static/-no-pie/-shared/-pie applications linked against glibc or musl
should work with this patch. This also helps FreeBSD PowerPC64 to migrate
their lib32 (PR40888).
* Fix default image base and max page size.
* Support new-style Secure PLT (see below). Old-style BSS PLT is not
implemented, so it is not suitable for FreeBSD rtld now because it doesn't
support Secure PLT yet.
* Support more initial relocation types:
R_PPC_ADDR32, R_PPC_REL16*, R_PPC_LOCAL24PC, R_PPC_PLTREL24, and R_PPC_GOT16.
The addend of R_PPC_PLTREL24 is special: it decides the call stub PLT type
but it should be ignored for the computation of target symbol VA.
* Support GNU ifunc
* Support .glink used for lazy PLT resolution in glibc
* Add a new thunk type: PPC32PltCallStub that is similar to PPC64PltCallStub.
It is used by R_PPC_REL24 and R_PPC_PLTREL24.
A PLT stub used in -fPIE/-fPIC usually loads an address relative to
.got2+0x8000 (-fpie/-fpic code uses _GLOBAL_OFFSET_TABLE_ relative
addresses).
Two .got2 sections in two object files have different addresses, thus a PLT stub
can't be shared by two object files. To handle this incompatibility,
change the parameters of Thunk::isCompatibleWith to
`const InputSection &, const Relocation &`.
PowerPC psABI specified an old-style .plt (BSS PLT) that is both
writable and executable. Linkers don't make separate RW- and RWE segments,
which causes all initially writable memory (think .data) executable.
This is a big security concern so a new PLT scheme (secure PLT) was developed to
address the security issue.
TLS will be implemented in D62940.
glibc older than ~2012 requires .rela.dyn to include .rela.plt, it can
not handle the DT_RELA+DT_RELASZ == DT_JMPREL case correctly. A hack
(not included in this patch) in LinkerScript.cpp addOrphanSections() to
work around the issue:
if (Config->EMachine == EM_PPC) {
// Older glibc assumes .rela.dyn includes .rela.plt
Add(In.RelaDyn);
if (In.RelaPlt->isLive() && !In.RelaPlt->Parent)
In.RelaDyn->getParent()->addSection(In.RelaPlt);
}
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D62464
llvm-svn: 362721
2019-06-07 01:03:00 +08:00
|
|
|
## Two bl 00008000.got2.plt_pic32.h
|
2020-03-23 14:03:09 +08:00
|
|
|
# PIE-NEXT: bl 0x10264
|
|
|
|
|
# PIE-NEXT: bl 0x10264
|
|
|
|
|
# PIE-NEXT: addis 30, 30, {{.*}}
|
|
|
|
|
# PIE-NEXT: addi 30, 30, {{.*}}
|
[PPC32] Improve the 32-bit PowerPC port
Many -static/-no-pie/-shared/-pie applications linked against glibc or musl
should work with this patch. This also helps FreeBSD PowerPC64 to migrate
their lib32 (PR40888).
* Fix default image base and max page size.
* Support new-style Secure PLT (see below). Old-style BSS PLT is not
implemented, so it is not suitable for FreeBSD rtld now because it doesn't
support Secure PLT yet.
* Support more initial relocation types:
R_PPC_ADDR32, R_PPC_REL16*, R_PPC_LOCAL24PC, R_PPC_PLTREL24, and R_PPC_GOT16.
The addend of R_PPC_PLTREL24 is special: it decides the call stub PLT type
but it should be ignored for the computation of target symbol VA.
* Support GNU ifunc
* Support .glink used for lazy PLT resolution in glibc
* Add a new thunk type: PPC32PltCallStub that is similar to PPC64PltCallStub.
It is used by R_PPC_REL24 and R_PPC_PLTREL24.
A PLT stub used in -fPIE/-fPIC usually loads an address relative to
.got2+0x8000 (-fpie/-fpic code uses _GLOBAL_OFFSET_TABLE_ relative
addresses).
Two .got2 sections in two object files have different addresses, thus a PLT stub
can't be shared by two object files. To handle this incompatibility,
change the parameters of Thunk::isCompatibleWith to
`const InputSection &, const Relocation &`.
PowerPC psABI specified an old-style .plt (BSS PLT) that is both
writable and executable. Linkers don't make separate RW- and RWE segments,
which causes all initially writable memory (think .data) executable.
This is a big security concern so a new PLT scheme (secure PLT) was developed to
address the security issue.
TLS will be implemented in D62940.
glibc older than ~2012 requires .rela.dyn to include .rela.plt, it can
not handle the DT_RELA+DT_RELASZ == DT_JMPREL case correctly. A hack
(not included in this patch) in LinkerScript.cpp addOrphanSections() to
work around the issue:
if (Config->EMachine == EM_PPC) {
// Older glibc assumes .rela.dyn includes .rela.plt
Add(In.RelaDyn);
if (In.RelaPlt->isLive() && !In.RelaPlt->Parent)
In.RelaDyn->getParent()->addSection(In.RelaPlt);
}
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D62464
llvm-svn: 362721
2019-06-07 01:03:00 +08:00
|
|
|
## bl 00008000.plt_pic32.f
|
2020-03-23 14:03:09 +08:00
|
|
|
# PIE-NEXT: bl 0x10274
|
[PPC32] Improve the 32-bit PowerPC port
Many -static/-no-pie/-shared/-pie applications linked against glibc or musl
should work with this patch. This also helps FreeBSD PowerPC64 to migrate
their lib32 (PR40888).
* Fix default image base and max page size.
* Support new-style Secure PLT (see below). Old-style BSS PLT is not
implemented, so it is not suitable for FreeBSD rtld now because it doesn't
support Secure PLT yet.
* Support more initial relocation types:
R_PPC_ADDR32, R_PPC_REL16*, R_PPC_LOCAL24PC, R_PPC_PLTREL24, and R_PPC_GOT16.
The addend of R_PPC_PLTREL24 is special: it decides the call stub PLT type
but it should be ignored for the computation of target symbol VA.
* Support GNU ifunc
* Support .glink used for lazy PLT resolution in glibc
* Add a new thunk type: PPC32PltCallStub that is similar to PPC64PltCallStub.
It is used by R_PPC_REL24 and R_PPC_PLTREL24.
A PLT stub used in -fPIE/-fPIC usually loads an address relative to
.got2+0x8000 (-fpie/-fpic code uses _GLOBAL_OFFSET_TABLE_ relative
addresses).
Two .got2 sections in two object files have different addresses, thus a PLT stub
can't be shared by two object files. To handle this incompatibility,
change the parameters of Thunk::isCompatibleWith to
`const InputSection &, const Relocation &`.
PowerPC psABI specified an old-style .plt (BSS PLT) that is both
writable and executable. Linkers don't make separate RW- and RWE segments,
which causes all initially writable memory (think .data) executable.
This is a big security concern so a new PLT scheme (secure PLT) was developed to
address the security issue.
TLS will be implemented in D62940.
glibc older than ~2012 requires .rela.dyn to include .rela.plt, it can
not handle the DT_RELA+DT_RELASZ == DT_JMPREL case correctly. A hack
(not included in this patch) in LinkerScript.cpp addOrphanSections() to
work around the issue:
if (Config->EMachine == EM_PPC) {
// Older glibc assumes .rela.dyn includes .rela.plt
Add(In.RelaDyn);
if (In.RelaPlt->isLive() && !In.RelaPlt->Parent)
In.RelaDyn->getParent()->addSection(In.RelaPlt);
}
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D62464
llvm-svn: 362721
2019-06-07 01:03:00 +08:00
|
|
|
## bl 00008000.plt_pic32.f
|
2020-03-23 14:03:09 +08:00
|
|
|
# PIE-NEXT: bl 0x10284
|
2020-03-27 14:40:23 +08:00
|
|
|
# SHARED-NEXT: bcl 20, 31, 0x10230
|
2020-03-23 14:03:09 +08:00
|
|
|
# SHARED-NEXT: 10230: mflr 30
|
|
|
|
|
# SHARED-NEXT: addis 30, 30, 3
|
|
|
|
|
# SHARED-NEXT: addi 30, 30, -32420
|
|
|
|
|
# SHARED-NEXT: bl 0x10264
|
|
|
|
|
# SHARED-NEXT: bl 0x10264
|
|
|
|
|
# SHARED-NEXT: bl 0x10274
|
|
|
|
|
# SHARED-NEXT: bl 0x10274
|
|
|
|
|
# SHARED-NEXT: bl 0x10284
|
|
|
|
|
# SHARED-NEXT: bl 0x10284
|
|
|
|
|
# SHARED-NEXT: addis 30, 30, {{.*}}
|
|
|
|
|
# SHARED-NEXT: addi 30, 30, {{.*}}
|
|
|
|
|
# SHARED-NEXT: bl 0x10294
|
|
|
|
|
# SHARED-NEXT: bl 0x102a4
|
[PPC32] Improve the 32-bit PowerPC port
Many -static/-no-pie/-shared/-pie applications linked against glibc or musl
should work with this patch. This also helps FreeBSD PowerPC64 to migrate
their lib32 (PR40888).
* Fix default image base and max page size.
* Support new-style Secure PLT (see below). Old-style BSS PLT is not
implemented, so it is not suitable for FreeBSD rtld now because it doesn't
support Secure PLT yet.
* Support more initial relocation types:
R_PPC_ADDR32, R_PPC_REL16*, R_PPC_LOCAL24PC, R_PPC_PLTREL24, and R_PPC_GOT16.
The addend of R_PPC_PLTREL24 is special: it decides the call stub PLT type
but it should be ignored for the computation of target symbol VA.
* Support GNU ifunc
* Support .glink used for lazy PLT resolution in glibc
* Add a new thunk type: PPC32PltCallStub that is similar to PPC64PltCallStub.
It is used by R_PPC_REL24 and R_PPC_PLTREL24.
A PLT stub used in -fPIE/-fPIC usually loads an address relative to
.got2+0x8000 (-fpie/-fpic code uses _GLOBAL_OFFSET_TABLE_ relative
addresses).
Two .got2 sections in two object files have different addresses, thus a PLT stub
can't be shared by two object files. To handle this incompatibility,
change the parameters of Thunk::isCompatibleWith to
`const InputSection &, const Relocation &`.
PowerPC psABI specified an old-style .plt (BSS PLT) that is both
writable and executable. Linkers don't make separate RW- and RWE segments,
which causes all initially writable memory (think .data) executable.
This is a big security concern so a new PLT scheme (secure PLT) was developed to
address the security issue.
TLS will be implemented in D62940.
glibc older than ~2012 requires .rela.dyn to include .rela.plt, it can
not handle the DT_RELA+DT_RELASZ == DT_JMPREL case correctly. A hack
(not included in this patch) in LinkerScript.cpp addOrphanSections() to
work around the issue:
if (Config->EMachine == EM_PPC) {
// Older glibc assumes .rela.dyn includes .rela.plt
Add(In.RelaDyn);
if (In.RelaPlt->isLive() && !In.RelaPlt->Parent)
In.RelaDyn->getParent()->addSection(In.RelaPlt);
}
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D62464
llvm-svn: 362721
2019-06-07 01:03:00 +08:00
|
|
|
# CHECK-EMPTY:
|
|
|
|
|
|
|
|
|
|
## -fPIC call stubs of f and g.
|
2020-03-06 06:18:38 +08:00
|
|
|
# CHECK-NEXT: <00008000.got2.plt_pic32.f>:
|
[PPC32] Improve the 32-bit PowerPC port
Many -static/-no-pie/-shared/-pie applications linked against glibc or musl
should work with this patch. This also helps FreeBSD PowerPC64 to migrate
their lib32 (PR40888).
* Fix default image base and max page size.
* Support new-style Secure PLT (see below). Old-style BSS PLT is not
implemented, so it is not suitable for FreeBSD rtld now because it doesn't
support Secure PLT yet.
* Support more initial relocation types:
R_PPC_ADDR32, R_PPC_REL16*, R_PPC_LOCAL24PC, R_PPC_PLTREL24, and R_PPC_GOT16.
The addend of R_PPC_PLTREL24 is special: it decides the call stub PLT type
but it should be ignored for the computation of target symbol VA.
* Support GNU ifunc
* Support .glink used for lazy PLT resolution in glibc
* Add a new thunk type: PPC32PltCallStub that is similar to PPC64PltCallStub.
It is used by R_PPC_REL24 and R_PPC_PLTREL24.
A PLT stub used in -fPIE/-fPIC usually loads an address relative to
.got2+0x8000 (-fpie/-fpic code uses _GLOBAL_OFFSET_TABLE_ relative
addresses).
Two .got2 sections in two object files have different addresses, thus a PLT stub
can't be shared by two object files. To handle this incompatibility,
change the parameters of Thunk::isCompatibleWith to
`const InputSection &, const Relocation &`.
PowerPC psABI specified an old-style .plt (BSS PLT) that is both
writable and executable. Linkers don't make separate RW- and RWE segments,
which causes all initially writable memory (think .data) executable.
This is a big security concern so a new PLT scheme (secure PLT) was developed to
address the security issue.
TLS will be implemented in D62940.
glibc older than ~2012 requires .rela.dyn to include .rela.plt, it can
not handle the DT_RELA+DT_RELASZ == DT_JMPREL case correctly. A hack
(not included in this patch) in LinkerScript.cpp addOrphanSections() to
work around the issue:
if (Config->EMachine == EM_PPC) {
// Older glibc assumes .rela.dyn includes .rela.plt
Add(In.RelaDyn);
if (In.RelaPlt->isLive() && !In.RelaPlt->Parent)
In.RelaDyn->getParent()->addSection(In.RelaPlt);
}
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D62464
llvm-svn: 362721
2019-06-07 01:03:00 +08:00
|
|
|
# CHECK-NEXT: lwz 11, 32760(30)
|
|
|
|
|
# CHECK-NEXT: mtctr 11
|
|
|
|
|
# CHECK-NEXT: bctr
|
|
|
|
|
# CHECK-NEXT: nop
|
|
|
|
|
# CHECK-EMPTY:
|
2020-03-06 06:18:38 +08:00
|
|
|
# CHECK-NEXT: <00008000.got2.plt_pic32.g>:
|
[PPC32] Improve the 32-bit PowerPC port
Many -static/-no-pie/-shared/-pie applications linked against glibc or musl
should work with this patch. This also helps FreeBSD PowerPC64 to migrate
their lib32 (PR40888).
* Fix default image base and max page size.
* Support new-style Secure PLT (see below). Old-style BSS PLT is not
implemented, so it is not suitable for FreeBSD rtld now because it doesn't
support Secure PLT yet.
* Support more initial relocation types:
R_PPC_ADDR32, R_PPC_REL16*, R_PPC_LOCAL24PC, R_PPC_PLTREL24, and R_PPC_GOT16.
The addend of R_PPC_PLTREL24 is special: it decides the call stub PLT type
but it should be ignored for the computation of target symbol VA.
* Support GNU ifunc
* Support .glink used for lazy PLT resolution in glibc
* Add a new thunk type: PPC32PltCallStub that is similar to PPC64PltCallStub.
It is used by R_PPC_REL24 and R_PPC_PLTREL24.
A PLT stub used in -fPIE/-fPIC usually loads an address relative to
.got2+0x8000 (-fpie/-fpic code uses _GLOBAL_OFFSET_TABLE_ relative
addresses).
Two .got2 sections in two object files have different addresses, thus a PLT stub
can't be shared by two object files. To handle this incompatibility,
change the parameters of Thunk::isCompatibleWith to
`const InputSection &, const Relocation &`.
PowerPC psABI specified an old-style .plt (BSS PLT) that is both
writable and executable. Linkers don't make separate RW- and RWE segments,
which causes all initially writable memory (think .data) executable.
This is a big security concern so a new PLT scheme (secure PLT) was developed to
address the security issue.
TLS will be implemented in D62940.
glibc older than ~2012 requires .rela.dyn to include .rela.plt, it can
not handle the DT_RELA+DT_RELASZ == DT_JMPREL case correctly. A hack
(not included in this patch) in LinkerScript.cpp addOrphanSections() to
work around the issue:
if (Config->EMachine == EM_PPC) {
// Older glibc assumes .rela.dyn includes .rela.plt
Add(In.RelaDyn);
if (In.RelaPlt->isLive() && !In.RelaPlt->Parent)
In.RelaDyn->getParent()->addSection(In.RelaPlt);
}
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D62464
llvm-svn: 362721
2019-06-07 01:03:00 +08:00
|
|
|
# CHECK-NEXT: lwz 11, 32764(30)
|
|
|
|
|
# CHECK-NEXT: mtctr 11
|
|
|
|
|
# CHECK-NEXT: bctr
|
|
|
|
|
# CHECK-NEXT: nop
|
|
|
|
|
# CHECK-EMPTY:
|
|
|
|
|
|
|
|
|
|
## The -fPIC call stub of h needs two instructions addis+lwz to represent the offset 65536*1-32768.
|
2020-03-06 06:18:38 +08:00
|
|
|
# CHECK-NEXT: <00008000.got2.plt_pic32.h>:
|
[PPC32] Improve the 32-bit PowerPC port
Many -static/-no-pie/-shared/-pie applications linked against glibc or musl
should work with this patch. This also helps FreeBSD PowerPC64 to migrate
their lib32 (PR40888).
* Fix default image base and max page size.
* Support new-style Secure PLT (see below). Old-style BSS PLT is not
implemented, so it is not suitable for FreeBSD rtld now because it doesn't
support Secure PLT yet.
* Support more initial relocation types:
R_PPC_ADDR32, R_PPC_REL16*, R_PPC_LOCAL24PC, R_PPC_PLTREL24, and R_PPC_GOT16.
The addend of R_PPC_PLTREL24 is special: it decides the call stub PLT type
but it should be ignored for the computation of target symbol VA.
* Support GNU ifunc
* Support .glink used for lazy PLT resolution in glibc
* Add a new thunk type: PPC32PltCallStub that is similar to PPC64PltCallStub.
It is used by R_PPC_REL24 and R_PPC_PLTREL24.
A PLT stub used in -fPIE/-fPIC usually loads an address relative to
.got2+0x8000 (-fpie/-fpic code uses _GLOBAL_OFFSET_TABLE_ relative
addresses).
Two .got2 sections in two object files have different addresses, thus a PLT stub
can't be shared by two object files. To handle this incompatibility,
change the parameters of Thunk::isCompatibleWith to
`const InputSection &, const Relocation &`.
PowerPC psABI specified an old-style .plt (BSS PLT) that is both
writable and executable. Linkers don't make separate RW- and RWE segments,
which causes all initially writable memory (think .data) executable.
This is a big security concern so a new PLT scheme (secure PLT) was developed to
address the security issue.
TLS will be implemented in D62940.
glibc older than ~2012 requires .rela.dyn to include .rela.plt, it can
not handle the DT_RELA+DT_RELASZ == DT_JMPREL case correctly. A hack
(not included in this patch) in LinkerScript.cpp addOrphanSections() to
work around the issue:
if (Config->EMachine == EM_PPC) {
// Older glibc assumes .rela.dyn includes .rela.plt
Add(In.RelaDyn);
if (In.RelaPlt->isLive() && !In.RelaPlt->Parent)
In.RelaDyn->getParent()->addSection(In.RelaPlt);
}
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D62464
llvm-svn: 362721
2019-06-07 01:03:00 +08:00
|
|
|
# CHECK-NEXT: addis 11, 30, 1
|
|
|
|
|
# CHECK-NEXT: lwz 11, -32768(11)
|
|
|
|
|
# CHECK-NEXT: mtctr 11
|
|
|
|
|
# CHECK-NEXT: bctr
|
|
|
|
|
# CHECK-EMPTY:
|
|
|
|
|
|
|
|
|
|
## -fpic call stub of f.
|
2020-03-06 06:18:38 +08:00
|
|
|
# CHECK-NEXT: <00000000.plt_pic32.f>:
|
[PPC32] Improve the 32-bit PowerPC port
Many -static/-no-pie/-shared/-pie applications linked against glibc or musl
should work with this patch. This also helps FreeBSD PowerPC64 to migrate
their lib32 (PR40888).
* Fix default image base and max page size.
* Support new-style Secure PLT (see below). Old-style BSS PLT is not
implemented, so it is not suitable for FreeBSD rtld now because it doesn't
support Secure PLT yet.
* Support more initial relocation types:
R_PPC_ADDR32, R_PPC_REL16*, R_PPC_LOCAL24PC, R_PPC_PLTREL24, and R_PPC_GOT16.
The addend of R_PPC_PLTREL24 is special: it decides the call stub PLT type
but it should be ignored for the computation of target symbol VA.
* Support GNU ifunc
* Support .glink used for lazy PLT resolution in glibc
* Add a new thunk type: PPC32PltCallStub that is similar to PPC64PltCallStub.
It is used by R_PPC_REL24 and R_PPC_PLTREL24.
A PLT stub used in -fPIE/-fPIC usually loads an address relative to
.got2+0x8000 (-fpie/-fpic code uses _GLOBAL_OFFSET_TABLE_ relative
addresses).
Two .got2 sections in two object files have different addresses, thus a PLT stub
can't be shared by two object files. To handle this incompatibility,
change the parameters of Thunk::isCompatibleWith to
`const InputSection &, const Relocation &`.
PowerPC psABI specified an old-style .plt (BSS PLT) that is both
writable and executable. Linkers don't make separate RW- and RWE segments,
which causes all initially writable memory (think .data) executable.
This is a big security concern so a new PLT scheme (secure PLT) was developed to
address the security issue.
TLS will be implemented in D62940.
glibc older than ~2012 requires .rela.dyn to include .rela.plt, it can
not handle the DT_RELA+DT_RELASZ == DT_JMPREL case correctly. A hack
(not included in this patch) in LinkerScript.cpp addOrphanSections() to
work around the issue:
if (Config->EMachine == EM_PPC) {
// Older glibc assumes .rela.dyn includes .rela.plt
Add(In.RelaDyn);
if (In.RelaPlt->isLive() && !In.RelaPlt->Parent)
In.RelaDyn->getParent()->addSection(In.RelaPlt);
}
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D62464
llvm-svn: 362721
2019-06-07 01:03:00 +08:00
|
|
|
# CHECK-NEXT: addis 11, 30, 2
|
2019-08-20 17:20:05 +08:00
|
|
|
# CHECK-NEXT: lwz 11, 4(11)
|
[PPC32] Improve the 32-bit PowerPC port
Many -static/-no-pie/-shared/-pie applications linked against glibc or musl
should work with this patch. This also helps FreeBSD PowerPC64 to migrate
their lib32 (PR40888).
* Fix default image base and max page size.
* Support new-style Secure PLT (see below). Old-style BSS PLT is not
implemented, so it is not suitable for FreeBSD rtld now because it doesn't
support Secure PLT yet.
* Support more initial relocation types:
R_PPC_ADDR32, R_PPC_REL16*, R_PPC_LOCAL24PC, R_PPC_PLTREL24, and R_PPC_GOT16.
The addend of R_PPC_PLTREL24 is special: it decides the call stub PLT type
but it should be ignored for the computation of target symbol VA.
* Support GNU ifunc
* Support .glink used for lazy PLT resolution in glibc
* Add a new thunk type: PPC32PltCallStub that is similar to PPC64PltCallStub.
It is used by R_PPC_REL24 and R_PPC_PLTREL24.
A PLT stub used in -fPIE/-fPIC usually loads an address relative to
.got2+0x8000 (-fpie/-fpic code uses _GLOBAL_OFFSET_TABLE_ relative
addresses).
Two .got2 sections in two object files have different addresses, thus a PLT stub
can't be shared by two object files. To handle this incompatibility,
change the parameters of Thunk::isCompatibleWith to
`const InputSection &, const Relocation &`.
PowerPC psABI specified an old-style .plt (BSS PLT) that is both
writable and executable. Linkers don't make separate RW- and RWE segments,
which causes all initially writable memory (think .data) executable.
This is a big security concern so a new PLT scheme (secure PLT) was developed to
address the security issue.
TLS will be implemented in D62940.
glibc older than ~2012 requires .rela.dyn to include .rela.plt, it can
not handle the DT_RELA+DT_RELASZ == DT_JMPREL case correctly. A hack
(not included in this patch) in LinkerScript.cpp addOrphanSections() to
work around the issue:
if (Config->EMachine == EM_PPC) {
// Older glibc assumes .rela.dyn includes .rela.plt
Add(In.RelaDyn);
if (In.RelaPlt->isLive() && !In.RelaPlt->Parent)
In.RelaDyn->getParent()->addSection(In.RelaPlt);
}
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D62464
llvm-svn: 362721
2019-06-07 01:03:00 +08:00
|
|
|
# CHECK-NEXT: mtctr 11
|
|
|
|
|
# CHECK-NEXT: bctr
|
|
|
|
|
# CHECK-EMPTY:
|
|
|
|
|
|
|
|
|
|
## Another -fPIC call stub of f from another object file %t2.o
|
|
|
|
|
## .got2 may have different addresses in different object files,
|
|
|
|
|
## so the call stub cannot be shared.
|
2020-03-06 06:18:38 +08:00
|
|
|
# CHECK-NEXT: <00008000.got2.plt_pic32.f>:
|
[PPC32] Improve the 32-bit PowerPC port
Many -static/-no-pie/-shared/-pie applications linked against glibc or musl
should work with this patch. This also helps FreeBSD PowerPC64 to migrate
their lib32 (PR40888).
* Fix default image base and max page size.
* Support new-style Secure PLT (see below). Old-style BSS PLT is not
implemented, so it is not suitable for FreeBSD rtld now because it doesn't
support Secure PLT yet.
* Support more initial relocation types:
R_PPC_ADDR32, R_PPC_REL16*, R_PPC_LOCAL24PC, R_PPC_PLTREL24, and R_PPC_GOT16.
The addend of R_PPC_PLTREL24 is special: it decides the call stub PLT type
but it should be ignored for the computation of target symbol VA.
* Support GNU ifunc
* Support .glink used for lazy PLT resolution in glibc
* Add a new thunk type: PPC32PltCallStub that is similar to PPC64PltCallStub.
It is used by R_PPC_REL24 and R_PPC_PLTREL24.
A PLT stub used in -fPIE/-fPIC usually loads an address relative to
.got2+0x8000 (-fpie/-fpic code uses _GLOBAL_OFFSET_TABLE_ relative
addresses).
Two .got2 sections in two object files have different addresses, thus a PLT stub
can't be shared by two object files. To handle this incompatibility,
change the parameters of Thunk::isCompatibleWith to
`const InputSection &, const Relocation &`.
PowerPC psABI specified an old-style .plt (BSS PLT) that is both
writable and executable. Linkers don't make separate RW- and RWE segments,
which causes all initially writable memory (think .data) executable.
This is a big security concern so a new PLT scheme (secure PLT) was developed to
address the security issue.
TLS will be implemented in D62940.
glibc older than ~2012 requires .rela.dyn to include .rela.plt, it can
not handle the DT_RELA+DT_RELASZ == DT_JMPREL case correctly. A hack
(not included in this patch) in LinkerScript.cpp addOrphanSections() to
work around the issue:
if (Config->EMachine == EM_PPC) {
// Older glibc assumes .rela.dyn includes .rela.plt
Add(In.RelaDyn);
if (In.RelaPlt->isLive() && !In.RelaPlt->Parent)
In.RelaDyn->getParent()->addSection(In.RelaPlt);
}
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D62464
llvm-svn: 362721
2019-06-07 01:03:00 +08:00
|
|
|
|
|
|
|
|
## In Secure PLT ABI, .plt stores function pointers to first instructions of .glink
|
2019-12-15 08:19:03 +08:00
|
|
|
# HEX: 0x0004036c 00010294 00010298 0001029c
|
[PPC32] Improve the 32-bit PowerPC port
Many -static/-no-pie/-shared/-pie applications linked against glibc or musl
should work with this patch. This also helps FreeBSD PowerPC64 to migrate
their lib32 (PR40888).
* Fix default image base and max page size.
* Support new-style Secure PLT (see below). Old-style BSS PLT is not
implemented, so it is not suitable for FreeBSD rtld now because it doesn't
support Secure PLT yet.
* Support more initial relocation types:
R_PPC_ADDR32, R_PPC_REL16*, R_PPC_LOCAL24PC, R_PPC_PLTREL24, and R_PPC_GOT16.
The addend of R_PPC_PLTREL24 is special: it decides the call stub PLT type
but it should be ignored for the computation of target symbol VA.
* Support GNU ifunc
* Support .glink used for lazy PLT resolution in glibc
* Add a new thunk type: PPC32PltCallStub that is similar to PPC64PltCallStub.
It is used by R_PPC_REL24 and R_PPC_PLTREL24.
A PLT stub used in -fPIE/-fPIC usually loads an address relative to
.got2+0x8000 (-fpie/-fpic code uses _GLOBAL_OFFSET_TABLE_ relative
addresses).
Two .got2 sections in two object files have different addresses, thus a PLT stub
can't be shared by two object files. To handle this incompatibility,
change the parameters of Thunk::isCompatibleWith to
`const InputSection &, const Relocation &`.
PowerPC psABI specified an old-style .plt (BSS PLT) that is both
writable and executable. Linkers don't make separate RW- and RWE segments,
which causes all initially writable memory (think .data) executable.
This is a big security concern so a new PLT scheme (secure PLT) was developed to
address the security issue.
TLS will be implemented in D62940.
glibc older than ~2012 requires .rela.dyn to include .rela.plt, it can
not handle the DT_RELA+DT_RELASZ == DT_JMPREL case correctly. A hack
(not included in this patch) in LinkerScript.cpp addOrphanSections() to
work around the issue:
if (Config->EMachine == EM_PPC) {
// Older glibc assumes .rela.dyn includes .rela.plt
Add(In.RelaDyn);
if (In.RelaPlt->isLive() && !In.RelaPlt->Parent)
In.RelaDyn->getParent()->addSection(In.RelaPlt);
}
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D62464
llvm-svn: 362721
2019-06-07 01:03:00 +08:00
|
|
|
|
|
|
|
|
## These instructions are referenced by .plt entries.
|
2020-04-02 13:09:28 +08:00
|
|
|
# CHECK: [[#%x,GLINK:]] <.glink>:
|
|
|
|
|
# CHECK-NEXT: b 0x[[#%x,GLINK+12]]
|
|
|
|
|
# CHECK-NEXT: b 0x[[#%x,GLINK+12]]
|
|
|
|
|
# CHECK-NEXT: b 0x[[#%x,GLINK+12]]
|
[PPC32] Improve the 32-bit PowerPC port
Many -static/-no-pie/-shared/-pie applications linked against glibc or musl
should work with this patch. This also helps FreeBSD PowerPC64 to migrate
their lib32 (PR40888).
* Fix default image base and max page size.
* Support new-style Secure PLT (see below). Old-style BSS PLT is not
implemented, so it is not suitable for FreeBSD rtld now because it doesn't
support Secure PLT yet.
* Support more initial relocation types:
R_PPC_ADDR32, R_PPC_REL16*, R_PPC_LOCAL24PC, R_PPC_PLTREL24, and R_PPC_GOT16.
The addend of R_PPC_PLTREL24 is special: it decides the call stub PLT type
but it should be ignored for the computation of target symbol VA.
* Support GNU ifunc
* Support .glink used for lazy PLT resolution in glibc
* Add a new thunk type: PPC32PltCallStub that is similar to PPC64PltCallStub.
It is used by R_PPC_REL24 and R_PPC_PLTREL24.
A PLT stub used in -fPIE/-fPIC usually loads an address relative to
.got2+0x8000 (-fpie/-fpic code uses _GLOBAL_OFFSET_TABLE_ relative
addresses).
Two .got2 sections in two object files have different addresses, thus a PLT stub
can't be shared by two object files. To handle this incompatibility,
change the parameters of Thunk::isCompatibleWith to
`const InputSection &, const Relocation &`.
PowerPC psABI specified an old-style .plt (BSS PLT) that is both
writable and executable. Linkers don't make separate RW- and RWE segments,
which causes all initially writable memory (think .data) executable.
This is a big security concern so a new PLT scheme (secure PLT) was developed to
address the security issue.
TLS will be implemented in D62940.
glibc older than ~2012 requires .rela.dyn to include .rela.plt, it can
not handle the DT_RELA+DT_RELASZ == DT_JMPREL case correctly. A hack
(not included in this patch) in LinkerScript.cpp addOrphanSections() to
work around the issue:
if (Config->EMachine == EM_PPC) {
// Older glibc assumes .rela.dyn includes .rela.plt
Add(In.RelaDyn);
if (In.RelaPlt->isLive() && !In.RelaPlt->Parent)
In.RelaDyn->getParent()->addSection(In.RelaPlt);
}
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D62464
llvm-svn: 362721
2019-06-07 01:03:00 +08:00
|
|
|
|
|
|
|
|
## PLTresolve
|
|
|
|
|
## Operand of addi: 0x100a8-.glink = 24
|
2019-08-20 17:20:05 +08:00
|
|
|
# CHECK-NEXT: addis 11, 11, 0
|
|
|
|
|
# CHECK-NEXT: mflr 0
|
2020-03-27 14:40:23 +08:00
|
|
|
# CHECK-NEXT: bcl 20, 31, 0x[[#%x,NEXT:]]
|
|
|
|
|
# CHECK-NEXT: [[#%x,NEXT]]: addi 11, 11, 24
|
[PPC32] Improve the 32-bit PowerPC port
Many -static/-no-pie/-shared/-pie applications linked against glibc or musl
should work with this patch. This also helps FreeBSD PowerPC64 to migrate
their lib32 (PR40888).
* Fix default image base and max page size.
* Support new-style Secure PLT (see below). Old-style BSS PLT is not
implemented, so it is not suitable for FreeBSD rtld now because it doesn't
support Secure PLT yet.
* Support more initial relocation types:
R_PPC_ADDR32, R_PPC_REL16*, R_PPC_LOCAL24PC, R_PPC_PLTREL24, and R_PPC_GOT16.
The addend of R_PPC_PLTREL24 is special: it decides the call stub PLT type
but it should be ignored for the computation of target symbol VA.
* Support GNU ifunc
* Support .glink used for lazy PLT resolution in glibc
* Add a new thunk type: PPC32PltCallStub that is similar to PPC64PltCallStub.
It is used by R_PPC_REL24 and R_PPC_PLTREL24.
A PLT stub used in -fPIE/-fPIC usually loads an address relative to
.got2+0x8000 (-fpie/-fpic code uses _GLOBAL_OFFSET_TABLE_ relative
addresses).
Two .got2 sections in two object files have different addresses, thus a PLT stub
can't be shared by two object files. To handle this incompatibility,
change the parameters of Thunk::isCompatibleWith to
`const InputSection &, const Relocation &`.
PowerPC psABI specified an old-style .plt (BSS PLT) that is both
writable and executable. Linkers don't make separate RW- and RWE segments,
which causes all initially writable memory (think .data) executable.
This is a big security concern so a new PLT scheme (secure PLT) was developed to
address the security issue.
TLS will be implemented in D62940.
glibc older than ~2012 requires .rela.dyn to include .rela.plt, it can
not handle the DT_RELA+DT_RELASZ == DT_JMPREL case correctly. A hack
(not included in this patch) in LinkerScript.cpp addOrphanSections() to
work around the issue:
if (Config->EMachine == EM_PPC) {
// Older glibc assumes .rela.dyn includes .rela.plt
Add(In.RelaDyn);
if (In.RelaPlt->isLive() && !In.RelaPlt->Parent)
In.RelaDyn->getParent()->addSection(In.RelaPlt);
}
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D62464
llvm-svn: 362721
2019-06-07 01:03:00 +08:00
|
|
|
|
|
|
|
|
# CHECK-NEXT: mflr 12
|
|
|
|
|
# CHECK-NEXT: mtlr 0
|
|
|
|
|
# CHECK-NEXT: subf 11, 12, 11
|
|
|
|
|
|
|
|
|
|
## Operand of lwz in -pie mode: &.got[1] - 0x100a8 = 0x20088+4 - 0x100a8 = 65536*1-28
|
2019-08-20 17:20:05 +08:00
|
|
|
# CHECK-NEXT: addis 12, 12, 1
|
|
|
|
|
# PIE-NEXT: lwz 0, 192(12)
|
|
|
|
|
# SHARED-NEXT: lwz 0, 184(12)
|
|
|
|
|
|
|
|
|
|
# PIE-NEXT: lwz 12, 196(12)
|
|
|
|
|
# SHARED-NEXT: lwz 12, 188(12)
|
|
|
|
|
# CHECK-NEXT: mtctr 0
|
|
|
|
|
# CHECK-NEXT: add 0, 11, 11
|
|
|
|
|
# CHECK-NEXT: add 11, 0, 11
|
|
|
|
|
# CHECK-NEXT: bctr
|
[PPC32] Improve the 32-bit PowerPC port
Many -static/-no-pie/-shared/-pie applications linked against glibc or musl
should work with this patch. This also helps FreeBSD PowerPC64 to migrate
their lib32 (PR40888).
* Fix default image base and max page size.
* Support new-style Secure PLT (see below). Old-style BSS PLT is not
implemented, so it is not suitable for FreeBSD rtld now because it doesn't
support Secure PLT yet.
* Support more initial relocation types:
R_PPC_ADDR32, R_PPC_REL16*, R_PPC_LOCAL24PC, R_PPC_PLTREL24, and R_PPC_GOT16.
The addend of R_PPC_PLTREL24 is special: it decides the call stub PLT type
but it should be ignored for the computation of target symbol VA.
* Support GNU ifunc
* Support .glink used for lazy PLT resolution in glibc
* Add a new thunk type: PPC32PltCallStub that is similar to PPC64PltCallStub.
It is used by R_PPC_REL24 and R_PPC_PLTREL24.
A PLT stub used in -fPIE/-fPIC usually loads an address relative to
.got2+0x8000 (-fpie/-fpic code uses _GLOBAL_OFFSET_TABLE_ relative
addresses).
Two .got2 sections in two object files have different addresses, thus a PLT stub
can't be shared by two object files. To handle this incompatibility,
change the parameters of Thunk::isCompatibleWith to
`const InputSection &, const Relocation &`.
PowerPC psABI specified an old-style .plt (BSS PLT) that is both
writable and executable. Linkers don't make separate RW- and RWE segments,
which causes all initially writable memory (think .data) executable.
This is a big security concern so a new PLT scheme (secure PLT) was developed to
address the security issue.
TLS will be implemented in D62940.
glibc older than ~2012 requires .rela.dyn to include .rela.plt, it can
not handle the DT_RELA+DT_RELASZ == DT_JMPREL case correctly. A hack
(not included in this patch) in LinkerScript.cpp addOrphanSections() to
work around the issue:
if (Config->EMachine == EM_PPC) {
// Older glibc assumes .rela.dyn includes .rela.plt
Add(In.RelaDyn);
if (In.RelaPlt->isLive() && !In.RelaPlt->Parent)
In.RelaDyn->getParent()->addSection(In.RelaPlt);
}
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D62464
llvm-svn: 362721
2019-06-07 01:03:00 +08:00
|
|
|
|
|
|
|
|
.section .got2,"aw"
|
|
|
|
|
.space 65516
|
|
|
|
|
.long f
|
|
|
|
|
.long g
|
|
|
|
|
.long h
|
|
|
|
|
|
|
|
|
|
.text
|
|
|
|
|
.globl _start
|
|
|
|
|
_start:
|
|
|
|
|
bcl 20,31,.L
|
|
|
|
|
.L:
|
|
|
|
|
mflr 30
|
|
|
|
|
addis 30, 30, .got2+0x8000-.L@ha
|
|
|
|
|
addi 30, 30, .got2+0x8000-.L@l
|
|
|
|
|
bl f+0x8000@plt
|
|
|
|
|
bl f+0x8000@plt
|
|
|
|
|
bl g+0x8000@plt
|
|
|
|
|
bl g+0x8000@plt
|
|
|
|
|
bl h+0x8000@plt
|
|
|
|
|
bl h+0x8000@plt
|
|
|
|
|
|
|
|
|
|
## An addend of 0 indicates r30 is stored in _GLOBAL_OFFSET_TABLE_.
|
|
|
|
|
## The existing thunk is incompatible, thus it cannot be reused.
|
|
|
|
|
addis 30, 30, _GLOBAL_OFFSET_TABLE_-.L@ha
|
|
|
|
|
addi 30, 30, _GLOBAL_OFFSET_TABLE_-.L@l
|
|
|
|
|
bl f@plt
|