TestBuildMulitStageResetScratch testcase was actually meant to be
TestBuildMulitStageResetScratch
Signed-off-by: Vitaly Ostrosablin <tmp6154@yandex.ru>
Signed-off-by: John Howard <jhoward@microsoft.com>
Also fixes https://github.com/moby/moby/issues/22874
This commit is a pre-requisite to moving moby/moby on Windows to using
Containerd for its runtime.
The reason for this is that the interface between moby and containerd
for the runtime is an OCI spec which must be unambigious.
It is the responsibility of the runtime (runhcs in the case of
containerd on Windows) to ensure that arguments are escaped prior
to calling into HCS and onwards to the Win32 CreateProcess call.
Previously, the builder was always escaping arguments which has
led to several bugs in moby. Because the local runtime in
libcontainerd had context of whether or not arguments were escaped,
it was possible to hack around in daemon/oci_windows.go with
knowledge of the context of the call (from builder or not).
With a remote runtime, this is not possible as there's rightly
no context of the caller passed across in the OCI spec. Put another
way, as I put above, the OCI spec must be unambigious.
The other previous limitation (which leads to various subtle bugs)
is that moby is coded entirely from a Linux-centric point of view.
Unfortunately, Windows != Linux. Windows CreateProcess uses a
command line, not an array of arguments. And it has very specific
rules about how to escape a command line. Some interesting reading
links about this are:
https://blogs.msdn.microsoft.com/twistylittlepassagesallalike/2011/04/23/everyone-quotes-command-line-arguments-the-wrong-way/https://stackoverflow.com/questions/31838469/how-do-i-convert-argv-to-lpcommandline-parameter-of-createprocesshttps://docs.microsoft.com/en-us/cpp/cpp/parsing-cpp-command-line-arguments?view=vs-2017
For this reason, the OCI spec has recently been updated to cater
for more natural syntax by including a CommandLine option in
Process.
What does this commit do?
Primary objective is to ensure that the built OCI spec is unambigious.
It changes the builder so that `ArgsEscaped` as commited in a
layer is only controlled by the use of CMD or ENTRYPOINT.
Subsequently, when calling in to create a container from the builder,
if follows a different path to both `docker run` and `docker create`
using the added `ContainerCreateIgnoreImagesArgsEscaped`. This allows
a RUN from the builder to control how to escape in the OCI spec.
It changes the builder so that when shell form is used for RUN,
CMD or ENTRYPOINT, it builds (for WCOW) a more natural command line
using the original as put by the user in the dockerfile, not
the parsed version as a set of args which loses fidelity.
This command line is put into args[0] and `ArgsEscaped` is set
to true for CMD or ENTRYPOINT. A RUN statement does not commit
`ArgsEscaped` to the commited layer regardless or whether shell
or exec form were used.
Signed-off-by: John Howard <jhoward@microsoft.com>
This is a follow-on from https://github.com/moby/moby/pull/38277
but had to be done in a couple of stages to ensure that CI didn't
break. v1.1 of the busybox image is now based on a CMD of "sh"
rather than using an entrypoint. And it also uses the bin directory
rather than `c:\busybox`. This makes it look a lot closer to the
Linux busybox image, and means that a couple of Windows-isms in
CI tests can be reverted back to be identical to their Linux
equivalents.
This should eliminate a bunch of new (go-1.11 related) validation
errors telling that the code is not formatted with `gofmt -s`.
No functional change, just whitespace (i.e.
`git show --ignore-space-change` shows nothing).
Patch generated with:
> git ls-files | grep -v ^vendor/ | grep .go$ | xargs gofmt -s -w
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
All `docker build` tests that require an `ExperimentalDaemon` are
migrated to `integration/build` package and start an experimental
daemon to test on it.
The end goal being to remove the `experimental` builds.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Remove TestBuildRenamedDockerfile and TestBuildDockerfileOutsideContext
that are cli-only tests (and already tested in the docker/cli
repository).
Also adds some comments on few tests that could be migrate to
docker/cli.
Signed-off-by: Vincent Demeester <vincent@sbr.pm>
Update and unify the `busybox` images on all arches to the `glibc` multi-arch
version and remove the temp workaround on amd64 which uses the old version
busybox (v1.26) before this PR to bypass the failure of those network related
test cases. Also, this PR will fix all the network related issues with `glibc`
version `busybox` image.
Signed-off-by: Dennis Chen <dennis.chen@arm.com>
BusyBox v1.26.2 (2017-03-09 00:04:38 UTC) supports `-le` option
to get the full date and time information, while BusyBox v1.27.2
(2017-11-01 23:22:25 UTC, which is used by the official multi-arch
image, uses `--full-time` instead of `-e` to get the same data. As
a result, we will get below error for the `DockerSuite.TestBuildLastModified`
test case in case of multi-arch image used:
> docker_cli_build_test.go:446:
> out2 = cli.DockerCmd(c, "run", name, "ls", "-le", "/file").Combined()
> o/src/github.com/docker/docker/vendor/github.com/gotestyourself/gotestyourself/icmd/command.go:61:
> t.Fatalf("at %s:%d - %s\n", filepath.Base(file), line, err.Error())
> ... Error: at cli.go:33 -
> Command: /usr/local/bin/docker run testbuildlastmodified ls -le /file
> ExitCode: 1
> Error: exit status 1
> Stdout:
> Stderr: ls: invalid option -- e
> BusyBox v1.27.2 (2017-11-01 23:22:25 UTC) multi-call binary.
This PR tries to fix the above compatible issue for busybox image.
Signed-off-by: Dennis Chen <dennis.chen@arm.com>
I got the following test failure on power:
10:00:56
10:00:56
----------------------------------------------------------------------
10:00:56 FAIL: docker_cli_build_test.go:3521:
DockerSuite.TestBuildNotVerboseFailureRemote
10:00:56
10:00:56 docker_cli_build_test.go:3536:
10:00:56 c.Fatal(fmt.Errorf("Test[%s] expected that quiet stderr and
verbose stdout are equal; quiet [%v], verbose [%v]", name,
quietResult.Stderr(), result.Combined()))
10:00:56 ... Error: Test[quiet_build_wrong_remote] expected that quiet
stderr and verbose stdout are equal; quiet [
10:00:56 unable to prepare context: unable to download remote context
http://something.invalid: Get http://something.invalid: dial tcp: lookup
something.invalid on 172.29.128.11:53: no such host
10:00:56 ], verbose [unable to prepare context: unable to download
remote context http://something.invalid: Get http://something.invalid:
dial tcp: lookup something.invalid on 8.8.8.8:53: no such host
10:00:56 ]
10:00:56
10:00:56
10:00:56
----------------------------------------------------------------------
The reason is, either more than one name server is configured, or
nameserver was reconfigured in the middle of the test run. In any case,
different nameserver IP in an error messages should not be treated
as a failure, so let's strip those out.
Signed-off-by: Kir Kolyshkin <kolyshkin@gmail.com>
This is a work base to introduce more features like build time
dockerfile optimisations, dependency analysis and parallel build, as
well as a first step to go from a dispatch-inline process to a
frontend+backend process.
Signed-off-by: Simon Ferquel <simon.ferquel@docker.com>
Commit the rwLayer to get the correct DiffID
Refacator copy in thebuilder
move more code into exportImage
cleanup some windows tests
Release the newly commited layer.
Set the imageID on the buildStage after exporting a new image.
Move archiver to BuildManager.
Have ReleaseableLayer.Commit return a layer
and store the Image from exportImage in the local imageSources cache
Remove NewChild from image interface.
Signed-off-by: Daniel Nephin <dnephin@docker.com>
This is synonymous with `docker run --cidfile=FILE` and writes the digest of
the newly built image to the named file. This is intended to be used by build
systems which want to avoid tagging (perhaps because they are in CI or
otherwise want to avoid fixed names which can clash) by enabling e.g. Makefile
constructs like:
image.id: Dockerfile
docker build --iidfile=image.id .
do-some-more-stuff: image.id
do-stuff-with <image.id
Currently the only way to achieve this is to use `docker build -q` and capture
the stdout, but at the expense of losing the build output.
In non-silent mode (without `-q`) with API >= v1.29 the caller will now see a
`JSONMessage` with the `Aux` field containing a `types.BuildResult` in the
output stream for each image/layer produced during the build, with the final
one being the end product. Having all of the intermediate images might be
interesting in some cases.
In silent mode (with `-q`) there is no change, on success the only output will
be the resulting image digest as it was previosuly.
There was no wrapper to just output an Aux section without enclosing it in a
Progress, so add one here.
Added some tests to integration cli tests.
Signed-off-by: Ian Campbell <ian.campbell@docker.com>
Tibor Vass