network/strongswan: Updated for version 5.7.2.

Signed-off-by: Willy Sudiarto Raharjo <willysr@slackbuilds.org>

network/strongswan/README

@@ -1,4 +1,53 @@
 StrongSwan is an OpenSource IPsec implementation for Linux.
 
-This build enables the OpenSSL extension which is included in the
-default Slackware install so it will cause no issues.
+This SlackBuild enables configure options which are known to compile
+without issue on a stock Slackware 14.2 system. These options provide
+additional functionality and increase this packages ability to
+inter operate with various vendor implementations. Unwanted and/or
+unnecessary plugins can be disabled a run-time via the 'load' flag in
+/etc/strongswan.d/charon/*.conf files.
+
+The following configure options are enabled by default:
+
+    --enable-shared
+    --enable-silent-rules
+    --enable-openssl
+    --enable-unity
+    --enable-curl
+    --enable-sql
+    --enable-sqlite
+    --enable-cmd
+    --enable-af-alg
+    --enable-gcrypt
+    --enable-aesni
+    --enable-sha3
+    --enable-files
+    --enable-lookip
+    --enable-eap-mschapv2
+    --enable-eap-tls
+    --enable-eap-ttls
+    --enable-eap-radius
+    --enable-ext-auth
+    --enable-xauth-eap
+
+To disable the above options set the environment variable CONFIG_OPTS
+to the empty string when calling this SlackBuild.
+
+Example:
+env CONFIG_OPTS=" " sh ./strongswan.SlackBuild
+
+To override the defaults options set CONFIG_OPTS to your desired set
+of configure options.
+
+Example:
+env CONFIG_OPTS="--enable-openssl --enable-unity" sh ./strongswan.SlackBuild
+
+To add to the default options without overwriting them set the
+EXTRA_CONFIG_OPTS environment variable.
+
+Example:
+env EXTRA_CONFIG_OPTS="--enable-socket-dynamic --enable-dhcp"  sh ./strongswan.SlackBuild
+
+The list of available options and their descriptions are available here:
+
+https://wiki.strongswan.org/projects/strongswan/wiki/Autoconf

network/strongswan/doinst.sh

@@ -1,59 +1,22 @@
+
 config() {
     NEW="$1"
- OLD="$(dirname $NEW)/$(basename $NEW .new)"
+    OLD="${1%.new}"
+    if [ ! -r $OLD ];
+    then
         # If there's no config file by that name, mv it over:
- if [ ! -r $OLD ]; then
         mv $NEW $OLD
- elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then # toss the redundant copy
+    elif [ "$(md5sum <$OLD)" = "$(md5sum <$NEW)" ];
+    then
+        # toss the redundant copy
         rm $NEW
     fi
     # Otherwise, we leave the .new copy for the admin to consider...
 }
 
-config etc/ipsec.conf.new
-config etc/ipsec.secrets.new
-config etc/strongswan.conf.new
-config etc/swanctl/swanctl.conf.new
-config etc/strongswan.d/starter.conf.new
-config etc/strongswan.d/swanctl.conf.new
-config etc/strongswan.d/charon-logging.conf.new
-config etc/strongswan.d/pki.conf.new
-config etc/strongswan.d/scepclient.conf.new
-config etc/strongswan.d/charon/attr.conf.new
-config etc/strongswan.d/charon/sshkey.conf.new
-config etc/strongswan.d/charon/pem.conf.new
-config etc/strongswan.d/charon/mgf1.conf.new
-config etc/strongswan.d/charon/pkcs8.conf.new
-config etc/strongswan.d/charon/kernel-netlink.conf.new
-config etc/strongswan.d/charon/nonce.conf.new
-config etc/strongswan.d/charon/curve25519.conf.new
-config etc/strongswan.d/charon/pkcs12.conf.new
-config etc/strongswan.d/charon/x509.conf.new
-config etc/strongswan.d/charon/dnskey.conf.new
-config etc/strongswan.d/charon/stroke.conf.new
-config etc/strongswan.d/charon/random.conf.new
-config etc/strongswan.d/charon/hmac.conf.new
-config etc/strongswan.d/charon/vici.conf.new
-config etc/strongswan.d/charon/md5.conf.new
-config etc/strongswan.d/charon/pubkey.conf.new
-config etc/strongswan.d/charon/counters.conf.new
-config etc/strongswan.d/charon/sha2.conf.new
-config etc/strongswan.d/charon/rc2.conf.new
-config etc/strongswan.d/charon/pkcs1.conf.new
-config etc/strongswan.d/charon/aes.conf.new
-config etc/strongswan.d/charon/xauth-generic.conf.new
-config etc/strongswan.d/charon/revocation.conf.new
-config etc/strongswan.d/charon/cmac.conf.new
-config etc/strongswan.d/charon/sha1.conf.new
-config etc/strongswan.d/charon/updown.conf.new
-config etc/strongswan.d/charon/pkcs7.conf.new
-config etc/strongswan.d/charon/fips-prf.conf.new
-config etc/strongswan.d/charon/gmp.conf.new
-config etc/strongswan.d/charon/pgp.conf.new
-config etc/strongswan.d/charon/xcbc.conf.new
-config etc/strongswan.d/charon/openssl.conf.new
-config etc/strongswan.d/charon/des.conf.new
-config etc/strongswan.d/charon/constraints.conf.new
-config etc/strongswan.d/charon/resolve.conf.new
-config etc/strongswan.d/charon/socket-default.conf.new
-config etc/strongswan.d/charon.conf.new
+# doinst.sh reads the list of files from ./install/conffiles at install time.
+# ./install/conffiles was generated by strongswan.SlackBuild
+for cf in $(cat install/conffiles)
+do
+    config $cf.new
+done

network/strongswan/strongswan.SlackBuild

@@ -1,6 +1,6 @@
 #!/bin/sh
 
-# Copyright 2018, Wayne Cuddy, wcuddyATgmailDOTcom
+# Copyright 2018-2019, Wayne Cuddy, wcuddyATgmailDOTcom
 # Copyright 2009-2013, Jonathan Larsen (agentc0re), SLC, UT
 # Copyright 2013-2015, Markus Hutmacher, mailing@markhu.de
 # All rights reserved.
@@ -22,11 +22,40 @@
 #  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
 #  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 
+#
+# 2019-03-02:
+#   - upgraded upstream version to 5.7.2
+#   - added DEFAULT_CONFIG_OPTS and EXTRA_CONFIG_OPTS
+#
+
 PRGNAM=strongswan
-VERSION=${VERSION:-5.6.2}
+VERSION=${VERSION:-5.7.2}
 BUILD=${BUILD:-1}
 TAG=${TAG:-_SBo}
 
+DEFAULT_CONFIG_OPTS="\
+    --enable-shared \
+    --enable-silent-rules \
+    --enable-openssl \
+    --enable-unity \
+    --enable-curl \
+    --enable-sql \
+    --enable-sqlite \
+    --enable-cmd \
+    --enable-af-alg \
+    --enable-gcrypt \
+    --enable-aesni \
+    --enable-sha3 \
+    --enable-files \
+    --enable-lookip \
+    --enable-eap-mschapv2 \
+    --enable-eap-tls \
+    --enable-eap-ttls \
+    --enable-eap-radius \
+    --enable-ext-auth \
+    --enable-xauth-eap \
+"
+
 if [ -z "$ARCH" ]; then
   case "$( uname -m )" in
     i?86) ARCH=i586 ;;
@@ -78,10 +107,9 @@ CXXFLAGS="$SLKCFLAGS" \
   --localstatedir=/var \
   --mandir=/usr/man \
   --docdir=/usr/doc/$PRGNAM-$VERSION \
-  --enable-shared \
-  --disable-static \
-  --enable-openssl \
-  --build=$ARCH-slackware-linux
+  --build=$ARCH-slackware-linux \
+  ${CONFIG_OPTS:-$DEFAULT_CONFIG_OPTS} \
+  $EXTRA_CONFIG_OPTS
 
 make
 make install DESTDIR=$PKG
@@ -92,18 +120,30 @@ find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | gr
 find $PKG/usr/man -type f -exec gzip -9 {} \;
 for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
 
-# Don't clobber existing config files
-mv $PKG/etc/ipsec.secrets $PKG/etc/ipsec.secrets.new
-for i in $(find $PKG/etc -type f -name '*.conf') ; do mv $i $i.new ; done
-
 mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
 cd $TMP/$PRGNAM-$VERSION
 cp -a COPYING ChangeLog INSTALL NEWS README TODO $PKG/usr/doc/$PRGNAM-$VERSION
 cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
 
+
 mkdir -p $PKG/install
 cat $CWD/slack-desc > $PKG/install/slack-desc
 cat $CWD/doinst.sh > $PKG/install/doinst.sh
 
 cd $PKG
+
+# Don't clobber existing config files. The options passed to the
+# configure script determine which plugins are built. The plugin list
+# determines which configuration files are installed. It's not possible
+# to know this ahead of time since the user can modify the plugins to
+# this SlackBuild. This loop tracks configuration files produced during
+# the build. The doinst.sh script will use this information during
+# package installation to ensure modified configuration files are not
+# overwritten.
+for i in $(find etc -type f)
+do
+    mv $i $i.new
+    echo $i
+done 1>>$PKG/install/conffiles
+
 /sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}

network/strongswan/strongswan.info

@@ -1,8 +1,8 @@
 PRGNAM="strongswan"
-VERSION="5.6.2"
+VERSION="5.7.2"
 HOMEPAGE="https://www.strongswan.org"
-DOWNLOAD="https://download.strongswan.org/strongswan-5.6.2.tar.bz2"
-MD5SUM="46aa3aa18fbc4bd528f9a0345ce79913"
+DOWNLOAD="https://download.strongswan.org/strongswan-5.7.2.tar.bz2"
+MD5SUM="618de96dc2a506f82a162a5abf9263d4"
 DOWNLOAD_x86_64=""
 MD5SUM_x86_64=""
 REQUIRES=""