hollalinux
/
linux-sg2042
mirror of https://github.com/sophgo/linux-riscv.git
1
0
Fork 0
Code Issues Packages Projects Releases Wiki Activity
linux-sg2042/arch/x86/kernel/vmlinux.lds.S

455 lines
11 KiB
ArmAsm
Raw Blame History

/* SPDX-License-Identifier: GPL-2.0 */
/*
* ld script for the x86 kernel
*
* Historic 32-bit version written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>
*
* Modernisation, unification and other changes and fixes:
* Copyright (C) 2007-2009 Sam Ravnborg <sam@ravnborg.org>
*
*
* Don't define absolute symbols until and unless you know that symbol
* value is should remain constant even if kernel image is relocated
* at run time. Absolute symbols are not relocated. If symbol value should
* change if kernel is relocated, make the symbol section relative and
* put it inside the section definition.
*/
#ifdef CONFIG_X86_32
#define LOAD_OFFSET __PAGE_OFFSET
#else
#define LOAD_OFFSET __START_KERNEL_map
#endif
#define RUNTIME_DISCARD_EXIT
#define EMITS_PT_NOTE
#define RO_EXCEPTION_TABLE_ALIGN 16
#include <asm-generic/vmlinux.lds.h>
#include <asm/asm-offsets.h>
#include <asm/thread_info.h>
#include <asm/page_types.h>
#include <asm/orc_lookup.h>
#include <asm/cache.h>
#include <asm/boot.h>
#undef i386 /* in case the preprocessor is a 32bit one */
OUTPUT_FORMAT(CONFIG_OUTPUT_FORMAT)
#ifdef CONFIG_X86_32
OUTPUT_ARCH(i386)
ENTRY(phys_startup_32)
#else
OUTPUT_ARCH(i386:x86-64)
ENTRY(phys_startup_64)
#endif
jiffies = jiffies_64;
#if defined(CONFIG_X86_64)
/*
* On 64-bit, align RODATA to 2MB so we retain large page mappings for
* boundaries spanning kernel text, rodata and data sections.
*
* However, kernel identity mappings will have different RWX permissions
* to the pages mapping to text and to the pages padding (which are freed) the
* text section. Hence kernel identity mappings will be broken to smaller
* pages. For 64-bit, kernel text and kernel identity mappings are different,
* so we can enable protection checks as well as retain 2MB large page
* mappings for kernel text.
*/
#define X86_ALIGN_RODATA_BEGIN . = ALIGN(HPAGE_SIZE);
#define X86_ALIGN_RODATA_END \
. = ALIGN(HPAGE_SIZE); \
__end_rodata_hpage_align = .; \
__end_rodata_aligned = .;
#define ALIGN_ENTRY_TEXT_BEGIN . = ALIGN(PMD_SIZE);
#define ALIGN_ENTRY_TEXT_END . = ALIGN(PMD_SIZE);
/*
* This section contains data which will be mapped as decrypted. Memory
* encryption operates on a page basis. Make this section PMD-aligned
* to avoid splitting the pages while mapping the section early.
*
* Note: We use a separate section so that only this section gets
* decrypted to avoid exposing more than we wish.
*/
#define BSS_DECRYPTED \
. = ALIGN(PMD_SIZE); \
__start_bss_decrypted = .; \
*(.bss..decrypted); \
. = ALIGN(PAGE_SIZE); \
__start_bss_decrypted_unused = .; \
. = ALIGN(PMD_SIZE); \
__end_bss_decrypted = .; \
#else
#define X86_ALIGN_RODATA_BEGIN
#define X86_ALIGN_RODATA_END \
. = ALIGN(PAGE_SIZE); \
__end_rodata_aligned = .;
#define ALIGN_ENTRY_TEXT_BEGIN
#define ALIGN_ENTRY_TEXT_END
#define BSS_DECRYPTED
#endif
PHDRS {
text PT_LOAD FLAGS(5); /* R_E */
data PT_LOAD FLAGS(6); /* RW_ */
#ifdef CONFIG_X86_64
#ifdef CONFIG_SMP
percpu PT_LOAD FLAGS(6); /* RW_ */
#endif
init PT_LOAD FLAGS(7); /* RWE */
#endif
note PT_NOTE FLAGS(0); /* ___ */
}
SECTIONS
{
#ifdef CONFIG_X86_32
. = LOAD_OFFSET + LOAD_PHYSICAL_ADDR;
phys_startup_32 = ABSOLUTE(startup_32 - LOAD_OFFSET);
#else
. = __START_KERNEL;
phys_startup_64 = ABSOLUTE(startup_64 - LOAD_OFFSET);
#endif
/* Text and read-only data */
.text : AT(ADDR(.text) - LOAD_OFFSET) {
_text = .;
_stext = .;
/* bootstrapping code */
HEAD_TEXT
TEXT_TEXT
SCHED_TEXT
CPUIDLE_TEXT
LOCK_TEXT
KPROBES_TEXT
ALIGN_ENTRY_TEXT_BEGIN
ENTRY_TEXT
ALIGN_ENTRY_TEXT_END
SOFTIRQENTRY_TEXT
*(.fixup)
*(.gnu.warning)
#ifdef CONFIG_RETPOLINE
__indirect_thunk_start = .;
*(.text.__x86.indirect_thunk)
__indirect_thunk_end = .;
#endif
} :text =0xcccc
/* End of text section, which should occupy whole number of pages */
_etext = .;
. = ALIGN(PAGE_SIZE);
X86_ALIGN_RODATA_BEGIN
RO_DATA(PAGE_SIZE)
X86_ALIGN_RODATA_END
/* Data */
.data : AT(ADDR(.data) - LOAD_OFFSET) {
/* Start of data section */
_sdata = .;
/* init_task */
INIT_TASK_DATA(THREAD_SIZE)
#ifdef CONFIG_X86_32
/* 32 bit has nosave before _edata */
NOSAVE_DATA
#endif
PAGE_ALIGNED_DATA(PAGE_SIZE)
CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES)
DATA_DATA
CONSTRUCTORS
/* rarely changed data like cpu maps */
READ_MOSTLY_DATA(INTERNODE_CACHE_BYTES)
/* End of data section */
_edata = .;
} :data
BUG_TABLE
ORC_UNWIND_TABLE
. = ALIGN(PAGE_SIZE);
__vvar_page = .;
.vvar : AT(ADDR(.vvar) - LOAD_OFFSET) {
/* work around gold bug 13023 */
__vvar_beginning_hack = .;
/* Place all vvars at the offsets in asm/vvar.h. */
#define EMIT_VVAR(name, offset) \
. = __vvar_beginning_hack + offset; \
*(.vvar_ ## name)
#include <asm/vvar.h>
#undef EMIT_VVAR
/*
* Pad the rest of the page with zeros. Otherwise the loader
* can leave garbage here.
*/
. = __vvar_beginning_hack + PAGE_SIZE;
} :data
. = ALIGN(__vvar_page + PAGE_SIZE, PAGE_SIZE);
/* Init code and data - will be freed after init */
. = ALIGN(PAGE_SIZE);
.init.begin : AT(ADDR(.init.begin) - LOAD_OFFSET) {
__init_begin = .; /* paired with __init_end */
}
#if defined(CONFIG_X86_64) && defined(CONFIG_SMP)
/*
* percpu offsets are zero-based on SMP. PERCPU_VADDR() changes the
* output PHDR, so the next output section - .init.text - should
* start another segment - init.
*/
PERCPU_VADDR(INTERNODE_CACHE_BYTES, 0, :percpu)
ASSERT(SIZEOF(.data..percpu) < CONFIG_PHYSICAL_START,
"per-CPU data too large - increase CONFIG_PHYSICAL_START")
#endif
INIT_TEXT_SECTION(PAGE_SIZE)
#ifdef CONFIG_X86_64
:init
#endif
/*
* Section for code used exclusively before alternatives are run. All
* references to such code must be patched out by alternatives, normally
* by using X86_FEATURE_ALWAYS CPU feature bit.
*
* See static_cpu_has() for an example.
*/
.altinstr_aux : AT(ADDR(.altinstr_aux) - LOAD_OFFSET) {
*(.altinstr_aux)
}
INIT_DATA_SECTION(16)
.x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) {
__x86_cpu_dev_start = .;
*(.x86_cpu_dev.init)
__x86_cpu_dev_end = .;
}
#ifdef CONFIG_X86_INTEL_MID
.x86_intel_mid_dev.init : AT(ADDR(.x86_intel_mid_dev.init) - \
LOAD_OFFSET) {
__x86_intel_mid_dev_start = .;
*(.x86_intel_mid_dev.init)
__x86_intel_mid_dev_end = .;
}
#endif
/*
* start address and size of operations which during runtime
* can be patched with virtualization friendly instructions or
* baremetal native ones. Think page table operations.
* Details in paravirt_types.h
*/
. = ALIGN(8);
.parainstructions : AT(ADDR(.parainstructions) - LOAD_OFFSET) {
__parainstructions = .;
*(.parainstructions)
__parainstructions_end = .;
}
/*
* struct alt_inst entries. From the header (alternative.h):
* "Alternative instructions for different CPU types or capabilities"
* Think locking instructions on spinlocks.
*/
. = ALIGN(8);
.altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) {
__alt_instructions = .;
*(.altinstructions)
__alt_instructions_end = .;
}
/*
* And here are the replacement instructions. The linker sticks
* them as binary blobs. The .altinstructions has enough data to
* get the address and the length of them to patch the kernel safely.
*/
.altinstr_replacement : AT(ADDR(.altinstr_replacement) - LOAD_OFFSET) {
*(.altinstr_replacement)
}
/*
* struct iommu_table_entry entries are injected in this section.
* It is an array of IOMMUs which during run time gets sorted depending
* on its dependency order. After rootfs_initcall is complete
* this section can be safely removed.
*/
.iommu_table : AT(ADDR(.iommu_table) - LOAD_OFFSET) {
__iommu_table = .;
*(.iommu_table)
__iommu_table_end = .;
}
. = ALIGN(8);
.apicdrivers : AT(ADDR(.apicdrivers) - LOAD_OFFSET) {
__apicdrivers = .;
*(.apicdrivers);
__apicdrivers_end = .;
}
. = ALIGN(8);
/*
* .exit.text is discarded at runtime, not link time, to deal with
* references from .altinstructions
*/
.exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) {
EXIT_TEXT
}
.exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) {
EXIT_DATA
}
#if !defined(CONFIG_X86_64) || !defined(CONFIG_SMP)
PERCPU_SECTION(INTERNODE_CACHE_BYTES)
#endif
. = ALIGN(PAGE_SIZE);
/* freed after init ends here */
.init.end : AT(ADDR(.init.end) - LOAD_OFFSET) {
__init_end = .;
}
/*
* smp_locks might be freed after init
* start/end must be page aligned
*/
. = ALIGN(PAGE_SIZE);
.smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
__smp_locks = .;
*(.smp_locks)
. = ALIGN(PAGE_SIZE);
__smp_locks_end = .;
}
#ifdef CONFIG_X86_64
.data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
NOSAVE_DATA
}
#endif
/* BSS */
. = ALIGN(PAGE_SIZE);
.bss : AT(ADDR(.bss) - LOAD_OFFSET) {
__bss_start = .;
*(.bss..page_aligned)
. = ALIGN(PAGE_SIZE);
*(BSS_MAIN)
BSS_DECRYPTED
. = ALIGN(PAGE_SIZE);
__bss_stop = .;
}
/*
* The memory occupied from _text to here, __end_of_kernel_reserve, is
* automatically reserved in setup_arch(). Anything after here must be
* explicitly reserved using memblock_reserve() or it will be discarded
* and treated as available memory.
*/
__end_of_kernel_reserve = .;
. = ALIGN(PAGE_SIZE);
.brk : AT(ADDR(.brk) - LOAD_OFFSET) {
__brk_base = .;
. += 64 * 1024; /* 64k alignment slop space */
*(.brk_reservation) /* areas brk users have reserved */
__brk_limit = .;
}
. = ALIGN(PAGE_SIZE); /* keep VO_INIT_SIZE page aligned */
_end = .;
#ifdef CONFIG_AMD_MEM_ENCRYPT
/*
* Early scratch/workarea section: Lives outside of the kernel proper
* (_text - _end).
*
* Resides after _end because even though the .brk section is after
* __end_of_kernel_reserve, the .brk section is later reserved as a
* part of the kernel. Since it is located after __end_of_kernel_reserve
* it will be discarded and become part of the available memory. As
* such, it can only be used by very early boot code and must not be
* needed afterwards.
*
* Currently used by SME for performing in-place encryption of the
* kernel during boot. Resides on a 2MB boundary to simplify the
* pagetable setup used for SME in-place encryption.
*/
. = ALIGN(HPAGE_SIZE);
.init.scratch : AT(ADDR(.init.scratch) - LOAD_OFFSET) {
__init_scratch_begin = .;
*(.init.scratch)
. = ALIGN(HPAGE_SIZE);
__init_scratch_end = .;
}
#endif
STABS_DEBUG
DWARF_DEBUG
DISCARDS
}
#ifdef CONFIG_X86_32
/*
* The ASSERT() sink to . is intentional, for binutils 2.14 compatibility:
*/
. = ASSERT((_end - LOAD_OFFSET <= KERNEL_IMAGE_SIZE),
"kernel image bigger than KERNEL_IMAGE_SIZE");
#else
/*
* Per-cpu symbols which need to be offset from __per_cpu_load
* for the boot processor.
*/
#define INIT_PER_CPU(x) init_per_cpu__##x = ABSOLUTE(x) + __per_cpu_load
INIT_PER_CPU(gdt_page);
INIT_PER_CPU(fixed_percpu_data);
INIT_PER_CPU(irq_stack_backing_store);
/*
* Build-time check on the image size:
*/
. = ASSERT((_end - _text <= KERNEL_IMAGE_SIZE),
"kernel image bigger than KERNEL_IMAGE_SIZE");
#ifdef CONFIG_SMP
. = ASSERT((fixed_percpu_data == 0),
"fixed_percpu_data is not at start of per-cpu area");
#endif
#endif /* CONFIG_X86_32 */
#ifdef CONFIG_KEXEC_CORE
#include <asm/kexec.h>
. = ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE,
"kexec control code size is too big");
#endif
Reference in New Issue View Git Blame Copy Permalink