1125 lines
23 KiB
C
1125 lines
23 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* imx214.c - imx214 sensor driver
|
|
*
|
|
* Copyright 2018 Qtechnology A/S
|
|
*
|
|
* Ricardo Ribalda <ricardo.ribalda@gmail.com>
|
|
*/
|
|
#include <linux/clk.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/gpio/consumer.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/module.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/regmap.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <media/media-entity.h>
|
|
#include <media/v4l2-ctrls.h>
|
|
#include <media/v4l2-fwnode.h>
|
|
#include <media/v4l2-subdev.h>
|
|
|
|
#define IMX214_DEFAULT_CLK_FREQ 24000000
|
|
#define IMX214_DEFAULT_LINK_FREQ 480000000
|
|
#define IMX214_DEFAULT_PIXEL_RATE ((IMX214_DEFAULT_LINK_FREQ * 8LL) / 10)
|
|
#define IMX214_FPS 30
|
|
#define IMX214_MBUS_CODE MEDIA_BUS_FMT_SRGGB10_1X10
|
|
|
|
static const char * const imx214_supply_name[] = {
|
|
"vdda",
|
|
"vddd",
|
|
"vdddo",
|
|
};
|
|
|
|
#define IMX214_NUM_SUPPLIES ARRAY_SIZE(imx214_supply_name)
|
|
|
|
struct imx214 {
|
|
struct device *dev;
|
|
struct clk *xclk;
|
|
struct regmap *regmap;
|
|
|
|
struct v4l2_subdev sd;
|
|
struct media_pad pad;
|
|
struct v4l2_mbus_framefmt fmt;
|
|
struct v4l2_rect crop;
|
|
|
|
struct v4l2_ctrl_handler ctrls;
|
|
struct v4l2_ctrl *pixel_rate;
|
|
struct v4l2_ctrl *link_freq;
|
|
struct v4l2_ctrl *exposure;
|
|
struct v4l2_ctrl *unit_size;
|
|
|
|
struct regulator_bulk_data supplies[IMX214_NUM_SUPPLIES];
|
|
|
|
struct gpio_desc *enable_gpio;
|
|
|
|
/*
|
|
* Serialize control access, get/set format, get selection
|
|
* and start streaming.
|
|
*/
|
|
struct mutex mutex;
|
|
|
|
bool streaming;
|
|
};
|
|
|
|
struct reg_8 {
|
|
u16 addr;
|
|
u8 val;
|
|
};
|
|
|
|
enum {
|
|
IMX214_TABLE_WAIT_MS = 0,
|
|
IMX214_TABLE_END,
|
|
IMX214_MAX_RETRIES,
|
|
IMX214_WAIT_MS
|
|
};
|
|
|
|
/*From imx214_mode_tbls.h*/
|
|
static const struct reg_8 mode_4096x2304[] = {
|
|
{0x0114, 0x03},
|
|
{0x0220, 0x00},
|
|
{0x0221, 0x11},
|
|
{0x0222, 0x01},
|
|
{0x0340, 0x0C},
|
|
{0x0341, 0x7A},
|
|
{0x0342, 0x13},
|
|
{0x0343, 0x90},
|
|
{0x0344, 0x00},
|
|
{0x0345, 0x38},
|
|
{0x0346, 0x01},
|
|
{0x0347, 0x98},
|
|
{0x0348, 0x10},
|
|
{0x0349, 0x37},
|
|
{0x034A, 0x0A},
|
|
{0x034B, 0x97},
|
|
{0x0381, 0x01},
|
|
{0x0383, 0x01},
|
|
{0x0385, 0x01},
|
|
{0x0387, 0x01},
|
|
{0x0900, 0x00},
|
|
{0x0901, 0x00},
|
|
{0x0902, 0x00},
|
|
{0x3000, 0x35},
|
|
{0x3054, 0x01},
|
|
{0x305C, 0x11},
|
|
|
|
{0x0112, 0x0A},
|
|
{0x0113, 0x0A},
|
|
{0x034C, 0x10},
|
|
{0x034D, 0x00},
|
|
{0x034E, 0x09},
|
|
{0x034F, 0x00},
|
|
{0x0401, 0x00},
|
|
{0x0404, 0x00},
|
|
{0x0405, 0x10},
|
|
{0x0408, 0x00},
|
|
{0x0409, 0x00},
|
|
{0x040A, 0x00},
|
|
{0x040B, 0x00},
|
|
{0x040C, 0x10},
|
|
{0x040D, 0x00},
|
|
{0x040E, 0x09},
|
|
{0x040F, 0x00},
|
|
|
|
{0x0301, 0x05},
|
|
{0x0303, 0x02},
|
|
{0x0305, 0x03},
|
|
{0x0306, 0x00},
|
|
{0x0307, 0x96},
|
|
{0x0309, 0x0A},
|
|
{0x030B, 0x01},
|
|
{0x0310, 0x00},
|
|
|
|
{0x0820, 0x12},
|
|
{0x0821, 0xC0},
|
|
{0x0822, 0x00},
|
|
{0x0823, 0x00},
|
|
|
|
{0x3A03, 0x09},
|
|
{0x3A04, 0x50},
|
|
{0x3A05, 0x01},
|
|
|
|
{0x0B06, 0x01},
|
|
{0x30A2, 0x00},
|
|
|
|
{0x30B4, 0x00},
|
|
|
|
{0x3A02, 0xFF},
|
|
|
|
{0x3011, 0x00},
|
|
{0x3013, 0x01},
|
|
|
|
{0x0202, 0x0C},
|
|
{0x0203, 0x70},
|
|
{0x0224, 0x01},
|
|
{0x0225, 0xF4},
|
|
|
|
{0x0204, 0x00},
|
|
{0x0205, 0x00},
|
|
{0x020E, 0x01},
|
|
{0x020F, 0x00},
|
|
{0x0210, 0x01},
|
|
{0x0211, 0x00},
|
|
{0x0212, 0x01},
|
|
{0x0213, 0x00},
|
|
{0x0214, 0x01},
|
|
{0x0215, 0x00},
|
|
{0x0216, 0x00},
|
|
{0x0217, 0x00},
|
|
|
|
{0x4170, 0x00},
|
|
{0x4171, 0x10},
|
|
{0x4176, 0x00},
|
|
{0x4177, 0x3C},
|
|
{0xAE20, 0x04},
|
|
{0xAE21, 0x5C},
|
|
|
|
{IMX214_TABLE_WAIT_MS, 10},
|
|
{0x0138, 0x01},
|
|
{IMX214_TABLE_END, 0x00}
|
|
};
|
|
|
|
static const struct reg_8 mode_1920x1080[] = {
|
|
{0x0114, 0x03},
|
|
{0x0220, 0x00},
|
|
{0x0221, 0x11},
|
|
{0x0222, 0x01},
|
|
{0x0340, 0x0C},
|
|
{0x0341, 0x7A},
|
|
{0x0342, 0x13},
|
|
{0x0343, 0x90},
|
|
{0x0344, 0x04},
|
|
{0x0345, 0x78},
|
|
{0x0346, 0x03},
|
|
{0x0347, 0xFC},
|
|
{0x0348, 0x0B},
|
|
{0x0349, 0xF7},
|
|
{0x034A, 0x08},
|
|
{0x034B, 0x33},
|
|
{0x0381, 0x01},
|
|
{0x0383, 0x01},
|
|
{0x0385, 0x01},
|
|
{0x0387, 0x01},
|
|
{0x0900, 0x00},
|
|
{0x0901, 0x00},
|
|
{0x0902, 0x00},
|
|
{0x3000, 0x35},
|
|
{0x3054, 0x01},
|
|
{0x305C, 0x11},
|
|
|
|
{0x0112, 0x0A},
|
|
{0x0113, 0x0A},
|
|
{0x034C, 0x07},
|
|
{0x034D, 0x80},
|
|
{0x034E, 0x04},
|
|
{0x034F, 0x38},
|
|
{0x0401, 0x00},
|
|
{0x0404, 0x00},
|
|
{0x0405, 0x10},
|
|
{0x0408, 0x00},
|
|
{0x0409, 0x00},
|
|
{0x040A, 0x00},
|
|
{0x040B, 0x00},
|
|
{0x040C, 0x07},
|
|
{0x040D, 0x80},
|
|
{0x040E, 0x04},
|
|
{0x040F, 0x38},
|
|
|
|
{0x0301, 0x05},
|
|
{0x0303, 0x02},
|
|
{0x0305, 0x03},
|
|
{0x0306, 0x00},
|
|
{0x0307, 0x96},
|
|
{0x0309, 0x0A},
|
|
{0x030B, 0x01},
|
|
{0x0310, 0x00},
|
|
|
|
{0x0820, 0x12},
|
|
{0x0821, 0xC0},
|
|
{0x0822, 0x00},
|
|
{0x0823, 0x00},
|
|
|
|
{0x3A03, 0x04},
|
|
{0x3A04, 0xF8},
|
|
{0x3A05, 0x02},
|
|
|
|
{0x0B06, 0x01},
|
|
{0x30A2, 0x00},
|
|
|
|
{0x30B4, 0x00},
|
|
|
|
{0x3A02, 0xFF},
|
|
|
|
{0x3011, 0x00},
|
|
{0x3013, 0x01},
|
|
|
|
{0x0202, 0x0C},
|
|
{0x0203, 0x70},
|
|
{0x0224, 0x01},
|
|
{0x0225, 0xF4},
|
|
|
|
{0x0204, 0x00},
|
|
{0x0205, 0x00},
|
|
{0x020E, 0x01},
|
|
{0x020F, 0x00},
|
|
{0x0210, 0x01},
|
|
{0x0211, 0x00},
|
|
{0x0212, 0x01},
|
|
{0x0213, 0x00},
|
|
{0x0214, 0x01},
|
|
{0x0215, 0x00},
|
|
{0x0216, 0x00},
|
|
{0x0217, 0x00},
|
|
|
|
{0x4170, 0x00},
|
|
{0x4171, 0x10},
|
|
{0x4176, 0x00},
|
|
{0x4177, 0x3C},
|
|
{0xAE20, 0x04},
|
|
{0xAE21, 0x5C},
|
|
|
|
{IMX214_TABLE_WAIT_MS, 10},
|
|
{0x0138, 0x01},
|
|
{IMX214_TABLE_END, 0x00}
|
|
};
|
|
|
|
static const struct reg_8 mode_table_common[] = {
|
|
/* software reset */
|
|
|
|
/* software standby settings */
|
|
{0x0100, 0x00},
|
|
|
|
/* ATR setting */
|
|
{0x9300, 0x02},
|
|
|
|
/* external clock setting */
|
|
{0x0136, 0x18},
|
|
{0x0137, 0x00},
|
|
|
|
/* global setting */
|
|
/* basic config */
|
|
{0x0101, 0x00},
|
|
{0x0105, 0x01},
|
|
{0x0106, 0x01},
|
|
{0x4550, 0x02},
|
|
{0x4601, 0x00},
|
|
{0x4642, 0x05},
|
|
{0x6227, 0x11},
|
|
{0x6276, 0x00},
|
|
{0x900E, 0x06},
|
|
{0xA802, 0x90},
|
|
{0xA803, 0x11},
|
|
{0xA804, 0x62},
|
|
{0xA805, 0x77},
|
|
{0xA806, 0xAE},
|
|
{0xA807, 0x34},
|
|
{0xA808, 0xAE},
|
|
{0xA809, 0x35},
|
|
{0xA80A, 0x62},
|
|
{0xA80B, 0x83},
|
|
{0xAE33, 0x00},
|
|
|
|
/* analog setting */
|
|
{0x4174, 0x00},
|
|
{0x4175, 0x11},
|
|
{0x4612, 0x29},
|
|
{0x461B, 0x12},
|
|
{0x461F, 0x06},
|
|
{0x4635, 0x07},
|
|
{0x4637, 0x30},
|
|
{0x463F, 0x18},
|
|
{0x4641, 0x0D},
|
|
{0x465B, 0x12},
|
|
{0x465F, 0x11},
|
|
{0x4663, 0x11},
|
|
{0x4667, 0x0F},
|
|
{0x466F, 0x0F},
|
|
{0x470E, 0x09},
|
|
{0x4909, 0xAB},
|
|
{0x490B, 0x95},
|
|
{0x4915, 0x5D},
|
|
{0x4A5F, 0xFF},
|
|
{0x4A61, 0xFF},
|
|
{0x4A73, 0x62},
|
|
{0x4A85, 0x00},
|
|
{0x4A87, 0xFF},
|
|
|
|
/* embedded data */
|
|
{0x5041, 0x04},
|
|
{0x583C, 0x04},
|
|
{0x620E, 0x04},
|
|
{0x6EB2, 0x01},
|
|
{0x6EB3, 0x00},
|
|
{0x9300, 0x02},
|
|
|
|
/* imagequality */
|
|
/* HDR setting */
|
|
{0x3001, 0x07},
|
|
{0x6D12, 0x3F},
|
|
{0x6D13, 0xFF},
|
|
{0x9344, 0x03},
|
|
{0x9706, 0x10},
|
|
{0x9707, 0x03},
|
|
{0x9708, 0x03},
|
|
{0x9E04, 0x01},
|
|
{0x9E05, 0x00},
|
|
{0x9E0C, 0x01},
|
|
{0x9E0D, 0x02},
|
|
{0x9E24, 0x00},
|
|
{0x9E25, 0x8C},
|
|
{0x9E26, 0x00},
|
|
{0x9E27, 0x94},
|
|
{0x9E28, 0x00},
|
|
{0x9E29, 0x96},
|
|
|
|
/* CNR parameter setting */
|
|
{0x69DB, 0x01},
|
|
|
|
/* Moire reduction */
|
|
{0x6957, 0x01},
|
|
|
|
/* image enhancement */
|
|
{0x6987, 0x17},
|
|
{0x698A, 0x03},
|
|
{0x698B, 0x03},
|
|
|
|
/* white balanace */
|
|
{0x0B8E, 0x01},
|
|
{0x0B8F, 0x00},
|
|
{0x0B90, 0x01},
|
|
{0x0B91, 0x00},
|
|
{0x0B92, 0x01},
|
|
{0x0B93, 0x00},
|
|
{0x0B94, 0x01},
|
|
{0x0B95, 0x00},
|
|
|
|
/* ATR setting */
|
|
{0x6E50, 0x00},
|
|
{0x6E51, 0x32},
|
|
{0x9340, 0x00},
|
|
{0x9341, 0x3C},
|
|
{0x9342, 0x03},
|
|
{0x9343, 0xFF},
|
|
{IMX214_TABLE_END, 0x00}
|
|
};
|
|
|
|
/*
|
|
* Declare modes in order, from biggest
|
|
* to smallest height.
|
|
*/
|
|
static const struct imx214_mode {
|
|
u32 width;
|
|
u32 height;
|
|
const struct reg_8 *reg_table;
|
|
} imx214_modes[] = {
|
|
{
|
|
.width = 4096,
|
|
.height = 2304,
|
|
.reg_table = mode_4096x2304,
|
|
},
|
|
{
|
|
.width = 1920,
|
|
.height = 1080,
|
|
.reg_table = mode_1920x1080,
|
|
},
|
|
};
|
|
|
|
static inline struct imx214 *to_imx214(struct v4l2_subdev *sd)
|
|
{
|
|
return container_of(sd, struct imx214, sd);
|
|
}
|
|
|
|
static int __maybe_unused imx214_power_on(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct imx214 *imx214 = to_imx214(sd);
|
|
int ret;
|
|
|
|
ret = regulator_bulk_enable(IMX214_NUM_SUPPLIES, imx214->supplies);
|
|
if (ret < 0) {
|
|
dev_err(imx214->dev, "failed to enable regulators: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
usleep_range(2000, 3000);
|
|
|
|
ret = clk_prepare_enable(imx214->xclk);
|
|
if (ret < 0) {
|
|
regulator_bulk_disable(IMX214_NUM_SUPPLIES, imx214->supplies);
|
|
dev_err(imx214->dev, "clk prepare enable failed\n");
|
|
return ret;
|
|
}
|
|
|
|
gpiod_set_value_cansleep(imx214->enable_gpio, 1);
|
|
usleep_range(12000, 15000);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused imx214_power_off(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct imx214 *imx214 = to_imx214(sd);
|
|
|
|
gpiod_set_value_cansleep(imx214->enable_gpio, 0);
|
|
|
|
clk_disable_unprepare(imx214->xclk);
|
|
|
|
regulator_bulk_disable(IMX214_NUM_SUPPLIES, imx214->supplies);
|
|
usleep_range(10, 20);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int imx214_enum_mbus_code(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_mbus_code_enum *code)
|
|
{
|
|
if (code->index > 0)
|
|
return -EINVAL;
|
|
|
|
code->code = IMX214_MBUS_CODE;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int imx214_enum_frame_size(struct v4l2_subdev *subdev,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_frame_size_enum *fse)
|
|
{
|
|
if (fse->code != IMX214_MBUS_CODE)
|
|
return -EINVAL;
|
|
|
|
if (fse->index >= ARRAY_SIZE(imx214_modes))
|
|
return -EINVAL;
|
|
|
|
fse->min_width = fse->max_width = imx214_modes[fse->index].width;
|
|
fse->min_height = fse->max_height = imx214_modes[fse->index].height;
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_VIDEO_ADV_DEBUG
|
|
static int imx214_s_register(struct v4l2_subdev *subdev,
|
|
const struct v4l2_dbg_register *reg)
|
|
{
|
|
struct imx214 *imx214 = container_of(subdev, struct imx214, sd);
|
|
|
|
return regmap_write(imx214->regmap, reg->reg, reg->val);
|
|
}
|
|
|
|
static int imx214_g_register(struct v4l2_subdev *subdev,
|
|
struct v4l2_dbg_register *reg)
|
|
{
|
|
struct imx214 *imx214 = container_of(subdev, struct imx214, sd);
|
|
unsigned int aux;
|
|
int ret;
|
|
|
|
reg->size = 1;
|
|
ret = regmap_read(imx214->regmap, reg->reg, &aux);
|
|
reg->val = aux;
|
|
|
|
return ret;
|
|
}
|
|
#endif
|
|
|
|
static const struct v4l2_subdev_core_ops imx214_core_ops = {
|
|
#ifdef CONFIG_VIDEO_ADV_DEBUG
|
|
.g_register = imx214_g_register,
|
|
.s_register = imx214_s_register,
|
|
#endif
|
|
};
|
|
|
|
static struct v4l2_mbus_framefmt *
|
|
__imx214_get_pad_format(struct imx214 *imx214,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
unsigned int pad,
|
|
enum v4l2_subdev_format_whence which)
|
|
{
|
|
switch (which) {
|
|
case V4L2_SUBDEV_FORMAT_TRY:
|
|
return v4l2_subdev_get_try_format(&imx214->sd, cfg, pad);
|
|
case V4L2_SUBDEV_FORMAT_ACTIVE:
|
|
return &imx214->fmt;
|
|
default:
|
|
return NULL;
|
|
}
|
|
}
|
|
|
|
static int imx214_get_format(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_format *format)
|
|
{
|
|
struct imx214 *imx214 = to_imx214(sd);
|
|
|
|
mutex_lock(&imx214->mutex);
|
|
format->format = *__imx214_get_pad_format(imx214, cfg, format->pad,
|
|
format->which);
|
|
mutex_unlock(&imx214->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct v4l2_rect *
|
|
__imx214_get_pad_crop(struct imx214 *imx214, struct v4l2_subdev_pad_config *cfg,
|
|
unsigned int pad, enum v4l2_subdev_format_whence which)
|
|
{
|
|
switch (which) {
|
|
case V4L2_SUBDEV_FORMAT_TRY:
|
|
return v4l2_subdev_get_try_crop(&imx214->sd, cfg, pad);
|
|
case V4L2_SUBDEV_FORMAT_ACTIVE:
|
|
return &imx214->crop;
|
|
default:
|
|
return NULL;
|
|
}
|
|
}
|
|
|
|
static int imx214_set_format(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_format *format)
|
|
{
|
|
struct imx214 *imx214 = to_imx214(sd);
|
|
struct v4l2_mbus_framefmt *__format;
|
|
struct v4l2_rect *__crop;
|
|
const struct imx214_mode *mode;
|
|
|
|
mutex_lock(&imx214->mutex);
|
|
|
|
__crop = __imx214_get_pad_crop(imx214, cfg, format->pad, format->which);
|
|
|
|
mode = v4l2_find_nearest_size(imx214_modes,
|
|
ARRAY_SIZE(imx214_modes), width, height,
|
|
format->format.width,
|
|
format->format.height);
|
|
|
|
__crop->width = mode->width;
|
|
__crop->height = mode->height;
|
|
|
|
__format = __imx214_get_pad_format(imx214, cfg, format->pad,
|
|
format->which);
|
|
__format->width = __crop->width;
|
|
__format->height = __crop->height;
|
|
__format->code = IMX214_MBUS_CODE;
|
|
__format->field = V4L2_FIELD_NONE;
|
|
__format->colorspace = V4L2_COLORSPACE_SRGB;
|
|
__format->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(__format->colorspace);
|
|
__format->quantization = V4L2_MAP_QUANTIZATION_DEFAULT(true,
|
|
__format->colorspace, __format->ycbcr_enc);
|
|
__format->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(__format->colorspace);
|
|
|
|
format->format = *__format;
|
|
|
|
mutex_unlock(&imx214->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int imx214_get_selection(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_selection *sel)
|
|
{
|
|
struct imx214 *imx214 = to_imx214(sd);
|
|
|
|
if (sel->target != V4L2_SEL_TGT_CROP)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&imx214->mutex);
|
|
sel->r = *__imx214_get_pad_crop(imx214, cfg, sel->pad,
|
|
sel->which);
|
|
mutex_unlock(&imx214->mutex);
|
|
return 0;
|
|
}
|
|
|
|
static int imx214_entity_init_cfg(struct v4l2_subdev *subdev,
|
|
struct v4l2_subdev_pad_config *cfg)
|
|
{
|
|
struct v4l2_subdev_format fmt = { };
|
|
|
|
fmt.which = cfg ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE;
|
|
fmt.format.width = imx214_modes[0].width;
|
|
fmt.format.height = imx214_modes[0].height;
|
|
|
|
imx214_set_format(subdev, cfg, &fmt);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int imx214_set_ctrl(struct v4l2_ctrl *ctrl)
|
|
{
|
|
struct imx214 *imx214 = container_of(ctrl->handler,
|
|
struct imx214, ctrls);
|
|
u8 vals[2];
|
|
int ret;
|
|
|
|
/*
|
|
* Applying V4L2 control value only happens
|
|
* when power is up for streaming
|
|
*/
|
|
if (!pm_runtime_get_if_in_use(imx214->dev))
|
|
return 0;
|
|
|
|
switch (ctrl->id) {
|
|
case V4L2_CID_EXPOSURE:
|
|
vals[1] = ctrl->val;
|
|
vals[0] = ctrl->val >> 8;
|
|
ret = regmap_bulk_write(imx214->regmap, 0x202, vals, 2);
|
|
if (ret < 0)
|
|
dev_err(imx214->dev, "Error %d\n", ret);
|
|
ret = 0;
|
|
break;
|
|
|
|
default:
|
|
ret = -EINVAL;
|
|
}
|
|
|
|
pm_runtime_put(imx214->dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static const struct v4l2_ctrl_ops imx214_ctrl_ops = {
|
|
.s_ctrl = imx214_set_ctrl,
|
|
};
|
|
|
|
#define MAX_CMD 4
|
|
static int imx214_write_table(struct imx214 *imx214,
|
|
const struct reg_8 table[])
|
|
{
|
|
u8 vals[MAX_CMD];
|
|
int i;
|
|
int ret;
|
|
|
|
for (; table->addr != IMX214_TABLE_END ; table++) {
|
|
if (table->addr == IMX214_TABLE_WAIT_MS) {
|
|
usleep_range(table->val * 1000,
|
|
table->val * 1000 + 500);
|
|
continue;
|
|
}
|
|
|
|
for (i = 0; i < MAX_CMD; i++) {
|
|
if (table[i].addr != (table[0].addr + i))
|
|
break;
|
|
vals[i] = table[i].val;
|
|
}
|
|
|
|
ret = regmap_bulk_write(imx214->regmap, table->addr, vals, i);
|
|
|
|
if (ret) {
|
|
dev_err(imx214->dev, "write_table error: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
table += i - 1;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int imx214_start_streaming(struct imx214 *imx214)
|
|
{
|
|
const struct imx214_mode *mode;
|
|
int ret;
|
|
|
|
mutex_lock(&imx214->mutex);
|
|
ret = imx214_write_table(imx214, mode_table_common);
|
|
if (ret < 0) {
|
|
dev_err(imx214->dev, "could not sent common table %d\n", ret);
|
|
goto error;
|
|
}
|
|
|
|
mode = v4l2_find_nearest_size(imx214_modes,
|
|
ARRAY_SIZE(imx214_modes), width, height,
|
|
imx214->fmt.width, imx214->fmt.height);
|
|
ret = imx214_write_table(imx214, mode->reg_table);
|
|
if (ret < 0) {
|
|
dev_err(imx214->dev, "could not sent mode table %d\n", ret);
|
|
goto error;
|
|
}
|
|
ret = __v4l2_ctrl_handler_setup(&imx214->ctrls);
|
|
if (ret < 0) {
|
|
dev_err(imx214->dev, "could not sync v4l2 controls\n");
|
|
goto error;
|
|
}
|
|
ret = regmap_write(imx214->regmap, 0x100, 1);
|
|
if (ret < 0) {
|
|
dev_err(imx214->dev, "could not sent start table %d\n", ret);
|
|
goto error;
|
|
}
|
|
|
|
mutex_unlock(&imx214->mutex);
|
|
return 0;
|
|
|
|
error:
|
|
mutex_unlock(&imx214->mutex);
|
|
return ret;
|
|
}
|
|
|
|
static int imx214_stop_streaming(struct imx214 *imx214)
|
|
{
|
|
int ret;
|
|
|
|
ret = regmap_write(imx214->regmap, 0x100, 0);
|
|
if (ret < 0)
|
|
dev_err(imx214->dev, "could not sent stop table %d\n", ret);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int imx214_s_stream(struct v4l2_subdev *subdev, int enable)
|
|
{
|
|
struct imx214 *imx214 = to_imx214(subdev);
|
|
int ret;
|
|
|
|
if (imx214->streaming == enable)
|
|
return 0;
|
|
|
|
if (enable) {
|
|
ret = pm_runtime_get_sync(imx214->dev);
|
|
if (ret < 0) {
|
|
pm_runtime_put_noidle(imx214->dev);
|
|
return ret;
|
|
}
|
|
|
|
ret = imx214_start_streaming(imx214);
|
|
if (ret < 0)
|
|
goto err_rpm_put;
|
|
} else {
|
|
ret = imx214_start_streaming(imx214);
|
|
if (ret < 0)
|
|
goto err_rpm_put;
|
|
pm_runtime_put(imx214->dev);
|
|
}
|
|
|
|
imx214->streaming = enable;
|
|
return 0;
|
|
|
|
err_rpm_put:
|
|
pm_runtime_put(imx214->dev);
|
|
return ret;
|
|
}
|
|
|
|
static int imx214_g_frame_interval(struct v4l2_subdev *subdev,
|
|
struct v4l2_subdev_frame_interval *fival)
|
|
{
|
|
fival->interval.numerator = 1;
|
|
fival->interval.denominator = IMX214_FPS;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int imx214_enum_frame_interval(struct v4l2_subdev *subdev,
|
|
struct v4l2_subdev_pad_config *cfg,
|
|
struct v4l2_subdev_frame_interval_enum *fie)
|
|
{
|
|
const struct imx214_mode *mode;
|
|
|
|
if (fie->index != 0)
|
|
return -EINVAL;
|
|
|
|
mode = v4l2_find_nearest_size(imx214_modes,
|
|
ARRAY_SIZE(imx214_modes), width, height,
|
|
fie->width, fie->height);
|
|
|
|
fie->code = IMX214_MBUS_CODE;
|
|
fie->width = mode->width;
|
|
fie->height = mode->height;
|
|
fie->interval.numerator = 1;
|
|
fie->interval.denominator = IMX214_FPS;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct v4l2_subdev_video_ops imx214_video_ops = {
|
|
.s_stream = imx214_s_stream,
|
|
.g_frame_interval = imx214_g_frame_interval,
|
|
.s_frame_interval = imx214_g_frame_interval,
|
|
};
|
|
|
|
static const struct v4l2_subdev_pad_ops imx214_subdev_pad_ops = {
|
|
.enum_mbus_code = imx214_enum_mbus_code,
|
|
.enum_frame_size = imx214_enum_frame_size,
|
|
.enum_frame_interval = imx214_enum_frame_interval,
|
|
.get_fmt = imx214_get_format,
|
|
.set_fmt = imx214_set_format,
|
|
.get_selection = imx214_get_selection,
|
|
.init_cfg = imx214_entity_init_cfg,
|
|
};
|
|
|
|
static const struct v4l2_subdev_ops imx214_subdev_ops = {
|
|
.core = &imx214_core_ops,
|
|
.video = &imx214_video_ops,
|
|
.pad = &imx214_subdev_pad_ops,
|
|
};
|
|
|
|
static const struct regmap_config sensor_regmap_config = {
|
|
.reg_bits = 16,
|
|
.val_bits = 8,
|
|
.cache_type = REGCACHE_RBTREE,
|
|
};
|
|
|
|
static int imx214_get_regulators(struct device *dev, struct imx214 *imx214)
|
|
{
|
|
unsigned int i;
|
|
|
|
for (i = 0; i < IMX214_NUM_SUPPLIES; i++)
|
|
imx214->supplies[i].supply = imx214_supply_name[i];
|
|
|
|
return devm_regulator_bulk_get(dev, IMX214_NUM_SUPPLIES,
|
|
imx214->supplies);
|
|
}
|
|
|
|
static int imx214_parse_fwnode(struct device *dev)
|
|
{
|
|
struct fwnode_handle *endpoint;
|
|
struct v4l2_fwnode_endpoint bus_cfg = {
|
|
.bus_type = V4L2_MBUS_CSI2_DPHY,
|
|
};
|
|
unsigned int i;
|
|
int ret;
|
|
|
|
endpoint = fwnode_graph_get_next_endpoint(dev_fwnode(dev), NULL);
|
|
if (!endpoint) {
|
|
dev_err(dev, "endpoint node not found\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = v4l2_fwnode_endpoint_alloc_parse(endpoint, &bus_cfg);
|
|
if (ret) {
|
|
dev_err(dev, "parsing endpoint node failed\n");
|
|
goto done;
|
|
}
|
|
|
|
for (i = 0; i < bus_cfg.nr_of_link_frequencies; i++)
|
|
if (bus_cfg.link_frequencies[i] == IMX214_DEFAULT_LINK_FREQ)
|
|
break;
|
|
|
|
if (i == bus_cfg.nr_of_link_frequencies) {
|
|
dev_err(dev, "link-frequencies %d not supported, Please review your DT\n",
|
|
IMX214_DEFAULT_LINK_FREQ);
|
|
ret = -EINVAL;
|
|
goto done;
|
|
}
|
|
|
|
done:
|
|
v4l2_fwnode_endpoint_free(&bus_cfg);
|
|
fwnode_handle_put(endpoint);
|
|
return ret;
|
|
}
|
|
|
|
static int __maybe_unused imx214_suspend(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct imx214 *imx214 = to_imx214(sd);
|
|
|
|
if (imx214->streaming)
|
|
imx214_stop_streaming(imx214);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused imx214_resume(struct device *dev)
|
|
{
|
|
struct i2c_client *client = to_i2c_client(dev);
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct imx214 *imx214 = to_imx214(sd);
|
|
int ret;
|
|
|
|
if (imx214->streaming) {
|
|
ret = imx214_start_streaming(imx214);
|
|
if (ret)
|
|
goto error;
|
|
}
|
|
|
|
return 0;
|
|
|
|
error:
|
|
imx214_stop_streaming(imx214);
|
|
imx214->streaming = 0;
|
|
return ret;
|
|
}
|
|
|
|
static int imx214_probe(struct i2c_client *client)
|
|
{
|
|
struct device *dev = &client->dev;
|
|
struct imx214 *imx214;
|
|
static const s64 link_freq[] = {
|
|
IMX214_DEFAULT_LINK_FREQ,
|
|
};
|
|
static const struct v4l2_area unit_size = {
|
|
.width = 1120,
|
|
.height = 1120,
|
|
};
|
|
int ret;
|
|
|
|
ret = imx214_parse_fwnode(dev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
imx214 = devm_kzalloc(dev, sizeof(*imx214), GFP_KERNEL);
|
|
if (!imx214)
|
|
return -ENOMEM;
|
|
|
|
imx214->dev = dev;
|
|
|
|
imx214->xclk = devm_clk_get(dev, NULL);
|
|
if (IS_ERR(imx214->xclk)) {
|
|
dev_err(dev, "could not get xclk");
|
|
return PTR_ERR(imx214->xclk);
|
|
}
|
|
|
|
ret = clk_set_rate(imx214->xclk, IMX214_DEFAULT_CLK_FREQ);
|
|
if (ret) {
|
|
dev_err(dev, "could not set xclk frequency\n");
|
|
return ret;
|
|
}
|
|
|
|
ret = imx214_get_regulators(dev, imx214);
|
|
if (ret < 0) {
|
|
dev_err(dev, "cannot get regulators\n");
|
|
return ret;
|
|
}
|
|
|
|
imx214->enable_gpio = devm_gpiod_get(dev, "enable", GPIOD_OUT_LOW);
|
|
if (IS_ERR(imx214->enable_gpio)) {
|
|
dev_err(dev, "cannot get enable gpio\n");
|
|
return PTR_ERR(imx214->enable_gpio);
|
|
}
|
|
|
|
imx214->regmap = devm_regmap_init_i2c(client, &sensor_regmap_config);
|
|
if (IS_ERR(imx214->regmap)) {
|
|
dev_err(dev, "regmap init failed\n");
|
|
return PTR_ERR(imx214->regmap);
|
|
}
|
|
|
|
v4l2_i2c_subdev_init(&imx214->sd, client, &imx214_subdev_ops);
|
|
|
|
/*
|
|
* Enable power initially, to avoid warnings
|
|
* from clk_disable on power_off
|
|
*/
|
|
imx214_power_on(imx214->dev);
|
|
|
|
pm_runtime_set_active(imx214->dev);
|
|
pm_runtime_enable(imx214->dev);
|
|
pm_runtime_idle(imx214->dev);
|
|
|
|
v4l2_ctrl_handler_init(&imx214->ctrls, 3);
|
|
|
|
imx214->pixel_rate = v4l2_ctrl_new_std(&imx214->ctrls, NULL,
|
|
V4L2_CID_PIXEL_RATE, 0,
|
|
IMX214_DEFAULT_PIXEL_RATE, 1,
|
|
IMX214_DEFAULT_PIXEL_RATE);
|
|
imx214->link_freq = v4l2_ctrl_new_int_menu(&imx214->ctrls, NULL,
|
|
V4L2_CID_LINK_FREQ,
|
|
ARRAY_SIZE(link_freq) - 1,
|
|
0, link_freq);
|
|
if (imx214->link_freq)
|
|
imx214->link_freq->flags |= V4L2_CTRL_FLAG_READ_ONLY;
|
|
|
|
/*
|
|
* WARNING!
|
|
* Values obtained reverse engineering blobs and/or devices.
|
|
* Ranges and functionality might be wrong.
|
|
*
|
|
* Sony, please release some register set documentation for the
|
|
* device.
|
|
*
|
|
* Yours sincerely, Ricardo.
|
|
*/
|
|
imx214->exposure = v4l2_ctrl_new_std(&imx214->ctrls, &imx214_ctrl_ops,
|
|
V4L2_CID_EXPOSURE,
|
|
0, 3184, 1, 0x0c70);
|
|
|
|
imx214->unit_size = v4l2_ctrl_new_std_compound(&imx214->ctrls,
|
|
NULL,
|
|
V4L2_CID_UNIT_CELL_SIZE,
|
|
v4l2_ctrl_ptr_create((void *)&unit_size));
|
|
ret = imx214->ctrls.error;
|
|
if (ret) {
|
|
dev_err(&client->dev, "%s control init failed (%d)\n",
|
|
__func__, ret);
|
|
goto free_ctrl;
|
|
}
|
|
|
|
imx214->sd.ctrl_handler = &imx214->ctrls;
|
|
mutex_init(&imx214->mutex);
|
|
imx214->ctrls.lock = &imx214->mutex;
|
|
|
|
imx214->sd.flags |= V4L2_SUBDEV_FL_HAS_DEVNODE;
|
|
imx214->pad.flags = MEDIA_PAD_FL_SOURCE;
|
|
imx214->sd.dev = &client->dev;
|
|
imx214->sd.entity.function = MEDIA_ENT_F_CAM_SENSOR;
|
|
|
|
ret = media_entity_pads_init(&imx214->sd.entity, 1, &imx214->pad);
|
|
if (ret < 0) {
|
|
dev_err(dev, "could not register media entity\n");
|
|
goto free_ctrl;
|
|
}
|
|
|
|
imx214_entity_init_cfg(&imx214->sd, NULL);
|
|
|
|
ret = v4l2_async_register_subdev_sensor_common(&imx214->sd);
|
|
if (ret < 0) {
|
|
dev_err(dev, "could not register v4l2 device\n");
|
|
goto free_entity;
|
|
}
|
|
|
|
return 0;
|
|
|
|
free_entity:
|
|
media_entity_cleanup(&imx214->sd.entity);
|
|
free_ctrl:
|
|
mutex_destroy(&imx214->mutex);
|
|
v4l2_ctrl_handler_free(&imx214->ctrls);
|
|
pm_runtime_disable(imx214->dev);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int imx214_remove(struct i2c_client *client)
|
|
{
|
|
struct v4l2_subdev *sd = i2c_get_clientdata(client);
|
|
struct imx214 *imx214 = to_imx214(sd);
|
|
|
|
v4l2_async_unregister_subdev(&imx214->sd);
|
|
media_entity_cleanup(&imx214->sd.entity);
|
|
v4l2_ctrl_handler_free(&imx214->ctrls);
|
|
|
|
pm_runtime_disable(&client->dev);
|
|
pm_runtime_set_suspended(&client->dev);
|
|
|
|
mutex_destroy(&imx214->mutex);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct of_device_id imx214_of_match[] = {
|
|
{ .compatible = "sony,imx214" },
|
|
{ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, imx214_of_match);
|
|
|
|
static const struct dev_pm_ops imx214_pm_ops = {
|
|
SET_SYSTEM_SLEEP_PM_OPS(imx214_suspend, imx214_resume)
|
|
SET_RUNTIME_PM_OPS(imx214_power_off, imx214_power_on, NULL)
|
|
};
|
|
|
|
static struct i2c_driver imx214_i2c_driver = {
|
|
.driver = {
|
|
.of_match_table = imx214_of_match,
|
|
.pm = &imx214_pm_ops,
|
|
.name = "imx214",
|
|
},
|
|
.probe_new = imx214_probe,
|
|
.remove = imx214_remove,
|
|
};
|
|
|
|
module_i2c_driver(imx214_i2c_driver);
|
|
|
|
MODULE_DESCRIPTION("Sony IMX214 Camera driver");
|
|
MODULE_AUTHOR("Ricardo Ribalda <ricardo.ribalda@gmail.com>");
|
|
MODULE_LICENSE("GPL v2");
|