linux-sg2042/Documentation/ABI/testing/sysfs-platform-wilco-ec

59 lines
2.3 KiB
Plaintext

What: /sys/bus/platform/devices/GOOG000C\:00/boot_on_ac
Date: April 2019
KernelVersion: 5.3
Description:
Boot on AC is a policy which makes the device boot from S5
when AC power is connected. This is useful for users who
want to run their device headless or with a dock.
Input should be parseable by kstrtou8() to 0 or 1.
What: /sys/bus/platform/devices/GOOG000C\:00/build_date
Date: May 2019
KernelVersion: 5.3
Description:
Display Wilco Embedded Controller firmware build date.
Output will a MM/DD/YY string.
What: /sys/bus/platform/devices/GOOG000C\:00/build_revision
Date: May 2019
KernelVersion: 5.3
Description:
Display Wilco Embedded Controller build revision.
Output will a version string be similar to the example below:
d2592cae0
What: /sys/bus/platform/devices/GOOG000C\:00/model_number
Date: May 2019
KernelVersion: 5.3
Description:
Display Wilco Embedded Controller model number.
Output will a version string be similar to the example below:
08B6
What: /sys/bus/platform/devices/GOOG000C\:00/usb_charge
Date: October 2019
KernelVersion: 5.5
Description:
Control the USB PowerShare Policy. USB PowerShare is a policy
which affects charging via the special USB PowerShare port
(marked with a small lightning bolt or battery icon) when in
low power states:
- In S0, the port will always provide power.
- In S0ix, if usb_charge is enabled, then power will be
supplied to the port when on AC or if battery is > 50%.
Else no power is supplied.
- In S5, if usb_charge is enabled, then power will be supplied
to the port when on AC. Else no power is supplied.
Input should be either "0" or "1".
What: /sys/bus/platform/devices/GOOG000C\:00/version
Date: May 2019
KernelVersion: 5.3
Description:
Display Wilco Embedded Controller firmware version.
The format of the string is x.y.z. Where x is major, y is minor
and z is the build number. For example: 95.00.06