linux-sg2042/drivers/bluetooth
Mohammed Habibulla 1fb4e09a7e Bluetooth: Add support for Lite-on [04ca:3007]
Add support for the AR9462 chip

T:  Bus=01 Lev=01 Prnt=01 Port=03 Cnt=03 Dev#=  3 Spd=12   MxCh= 0
D:  Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs=  1
P:  Vendor=04ca ProdID=3007 Rev= 0.01
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=81(I) Atr=03(Int.) MxPS=  16 Ivl=1ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=0ms
E:  Ad=02(O) Atr=02(Bulk) MxPS=  64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   0 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   0 Ivl=1ms
I:  If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=   9 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=   9 Ivl=1ms
I:  If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  17 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  17 Ivl=1ms
I:  If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  25 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  25 Ivl=1ms
I:  If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  33 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  33 Ivl=1ms
I:  If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E:  Ad=83(I) Atr=01(Isoc) MxPS=  49 Ivl=1ms
E:  Ad=03(O) Atr=01(Isoc) MxPS=  49 Ivl=1ms

Signed-off-by: Mohammed Habibulla <moch@chromium.org>
Cc: stable@vger.kernel.org
Signed-off-by: Gustavo Padovan <gustavo.padovan@collabora.co.uk>
2014-04-25 09:47:16 +03:00
..
Kconfig Bluetooth: add module name for btwilink 2014-03-10 14:11:02 +01:00
Makefile Bluetooth: Enable -D__CHECK_ENDIAN__ for sparse by default 2013-10-02 09:10:05 +03:00
ath3k.c Bluetooth: Add support for Lite-on [04ca:3007] 2014-04-25 09:47:16 +03:00
bcm203x.c Bluetooth: Use devm_kzalloc in bcm203x.c file. 2012-08-06 15:03:00 -03:00
bfusb.c Bluetooth: Remove assignments in if-statements 2014-03-05 20:52:17 +02:00
bluecard_cs.c Bluetooth: bluecard: Use del_timer_sync() in teardown path 2014-03-23 10:30:22 -07:00
bpa10x.c Bluetooth: Declare bpa10x_table[] as const 2013-10-11 17:05:22 +02:00
bt3c_cs.c Bluetooth: Remove assignments in if-statements 2014-03-05 20:52:17 +02:00
btmrvl_debugfs.c Bluetooth: replace strict_strtol() with kstrtol() 2013-07-25 14:15:25 +01:00
btmrvl_drv.h Bluetooth: btmrvl: remove cal-data byte swapping and redundant mem copy 2013-12-04 11:09:03 -02:00
btmrvl_main.c Bluetooth: btmrvl: don't consume all vendor specific events 2014-03-20 20:29:48 -07:00
btmrvl_sdio.c Bluetooth: btmrvl: use cal-data from device-tree instead of conf file 2013-12-04 11:09:03 -02:00
btmrvl_sdio.h Bluetooth: btmrvl: use cal-data from device-tree instead of conf file 2013-12-04 11:09:03 -02:00
btsdio.c Bluetooth: Use MD SET register for changing SDIO Type-B to Type-A 2013-12-29 21:31:07 +02:00
btuart_cs.c Bluetooth: Remove assignments in if-statements 2014-03-05 20:52:17 +02:00
btusb.c Bluetooth: Add support for Lite-on [04ca:3007] 2014-04-25 09:47:16 +03:00
btwilink.c Bluetooth: Add hdev parameter to hdev->send driver callback 2013-10-11 15:28:03 +02:00
dtl1_cs.c Bluetooth: Remove assignments in if-statements 2014-03-05 20:52:17 +02:00
hci_ath.c tty: move the termios object into the tty 2012-07-16 13:00:41 -07:00
hci_bcsp.c Bluetooth: Remove assignments in if-statements 2014-03-05 20:52:17 +02:00
hci_h4.c Bluetooth: Remove unused h4_check_data_len() function 2013-10-11 07:51:09 +02:00
hci_h5.c Bluetooth: Remove assignments in if-statements 2014-03-05 20:52:17 +02:00
hci_ldisc.c Bluetooth: Remove assignments in if-statements 2014-03-05 20:52:17 +02:00
hci_ll.c Bluetooth: Add hdev parameter to hdev->send driver callback 2013-10-11 15:28:03 +02:00
hci_uart.h Bluetooth: Add delayed init sequence support for UART controllers 2012-07-17 14:48:29 -03:00
hci_vhci.c Bluetooth: allocate static minor for vhci 2014-02-18 09:49:04 -08:00