407 lines
11 KiB
C
407 lines
11 KiB
C
/*
|
|
* Broadcom SATA3 AHCI Controller Driver
|
|
*
|
|
* Copyright © 2009-2015 Broadcom Corporation
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2, or (at your option)
|
|
* any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include <linux/ahci_platform.h>
|
|
#include <linux/compiler.h>
|
|
#include <linux/device.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/io.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/libata.h>
|
|
#include <linux/module.h>
|
|
#include <linux/of.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/string.h>
|
|
|
|
#include "ahci.h"
|
|
|
|
#define DRV_NAME "brcm-ahci"
|
|
|
|
#define SATA_TOP_CTRL_VERSION 0x0
|
|
#define SATA_TOP_CTRL_BUS_CTRL 0x4
|
|
#define MMIO_ENDIAN_SHIFT 0 /* CPU->AHCI */
|
|
#define DMADESC_ENDIAN_SHIFT 2 /* AHCI->DDR */
|
|
#define DMADATA_ENDIAN_SHIFT 4 /* AHCI->DDR */
|
|
#define PIODATA_ENDIAN_SHIFT 6
|
|
#define ENDIAN_SWAP_NONE 0
|
|
#define ENDIAN_SWAP_FULL 2
|
|
#define OVERRIDE_HWINIT BIT(16)
|
|
#define SATA_TOP_CTRL_TP_CTRL 0x8
|
|
#define SATA_TOP_CTRL_PHY_CTRL 0xc
|
|
#define SATA_TOP_CTRL_PHY_CTRL_1 0x0
|
|
#define SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE BIT(14)
|
|
#define SATA_TOP_CTRL_PHY_CTRL_2 0x4
|
|
#define SATA_TOP_CTRL_2_SW_RST_MDIOREG BIT(0)
|
|
#define SATA_TOP_CTRL_2_SW_RST_OOB BIT(1)
|
|
#define SATA_TOP_CTRL_2_SW_RST_RX BIT(2)
|
|
#define SATA_TOP_CTRL_2_SW_RST_TX BIT(3)
|
|
#define SATA_TOP_CTRL_2_PHY_GLOBAL_RESET BIT(14)
|
|
#define SATA_TOP_CTRL_PHY_OFFS 0x8
|
|
#define SATA_TOP_MAX_PHYS 2
|
|
|
|
#define SATA_FIRST_PORT_CTRL 0x700
|
|
#define SATA_NEXT_PORT_CTRL_OFFSET 0x80
|
|
#define SATA_PORT_PCTRL6(reg_base) (reg_base + 0x18)
|
|
|
|
/* On big-endian MIPS, buses are reversed to big endian, so switch them back */
|
|
#if defined(CONFIG_MIPS) && defined(__BIG_ENDIAN)
|
|
#define DATA_ENDIAN 2 /* AHCI->DDR inbound accesses */
|
|
#define MMIO_ENDIAN 2 /* CPU->AHCI outbound accesses */
|
|
#else
|
|
#define DATA_ENDIAN 0
|
|
#define MMIO_ENDIAN 0
|
|
#endif
|
|
|
|
#define BUS_CTRL_ENDIAN_CONF \
|
|
((DATA_ENDIAN << DMADATA_ENDIAN_SHIFT) | \
|
|
(DATA_ENDIAN << DMADESC_ENDIAN_SHIFT) | \
|
|
(MMIO_ENDIAN << MMIO_ENDIAN_SHIFT))
|
|
|
|
enum brcm_ahci_version {
|
|
BRCM_SATA_BCM7425 = 1,
|
|
BRCM_SATA_BCM7445,
|
|
BRCM_SATA_NSP,
|
|
};
|
|
|
|
enum brcm_ahci_quirks {
|
|
BRCM_AHCI_QUIRK_NO_NCQ = BIT(0),
|
|
BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE = BIT(1),
|
|
};
|
|
|
|
struct brcm_ahci_priv {
|
|
struct device *dev;
|
|
void __iomem *top_ctrl;
|
|
u32 port_mask;
|
|
u32 quirks;
|
|
enum brcm_ahci_version version;
|
|
};
|
|
|
|
static const struct ata_port_info ahci_brcm_port_info = {
|
|
.flags = AHCI_FLAG_COMMON | ATA_FLAG_NO_DIPM,
|
|
.link_flags = ATA_LFLAG_NO_DB_DELAY,
|
|
.pio_mask = ATA_PIO4,
|
|
.udma_mask = ATA_UDMA6,
|
|
.port_ops = &ahci_platform_ops,
|
|
};
|
|
|
|
static inline u32 brcm_sata_readreg(void __iomem *addr)
|
|
{
|
|
/*
|
|
* MIPS endianness is configured by boot strap, which also reverses all
|
|
* bus endianness (i.e., big-endian CPU + big endian bus ==> native
|
|
* endian I/O).
|
|
*
|
|
* Other architectures (e.g., ARM) either do not support big endian, or
|
|
* else leave I/O in little endian mode.
|
|
*/
|
|
if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
|
|
return __raw_readl(addr);
|
|
else
|
|
return readl_relaxed(addr);
|
|
}
|
|
|
|
static inline void brcm_sata_writereg(u32 val, void __iomem *addr)
|
|
{
|
|
/* See brcm_sata_readreg() comments */
|
|
if (IS_ENABLED(CONFIG_MIPS) && IS_ENABLED(CONFIG_CPU_BIG_ENDIAN))
|
|
__raw_writel(val, addr);
|
|
else
|
|
writel_relaxed(val, addr);
|
|
}
|
|
|
|
static void brcm_sata_alpm_init(struct ahci_host_priv *hpriv)
|
|
{
|
|
struct brcm_ahci_priv *priv = hpriv->plat_data;
|
|
u32 bus_ctrl, port_ctrl, host_caps;
|
|
int i;
|
|
|
|
/* Enable support for ALPM */
|
|
bus_ctrl = brcm_sata_readreg(priv->top_ctrl +
|
|
SATA_TOP_CTRL_BUS_CTRL);
|
|
brcm_sata_writereg(bus_ctrl | OVERRIDE_HWINIT,
|
|
priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL);
|
|
host_caps = readl(hpriv->mmio + HOST_CAP);
|
|
writel(host_caps | HOST_CAP_ALPM, hpriv->mmio);
|
|
brcm_sata_writereg(bus_ctrl, priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL);
|
|
|
|
/*
|
|
* Adjust timeout to allow PLL sufficient time to lock while waking
|
|
* up from slumber mode.
|
|
*/
|
|
for (i = 0, port_ctrl = SATA_FIRST_PORT_CTRL;
|
|
i < SATA_TOP_MAX_PHYS;
|
|
i++, port_ctrl += SATA_NEXT_PORT_CTRL_OFFSET) {
|
|
if (priv->port_mask & BIT(i))
|
|
writel(0xff1003fc,
|
|
hpriv->mmio + SATA_PORT_PCTRL6(port_ctrl));
|
|
}
|
|
}
|
|
|
|
static void brcm_sata_phy_enable(struct brcm_ahci_priv *priv, int port)
|
|
{
|
|
void __iomem *phyctrl = priv->top_ctrl + SATA_TOP_CTRL_PHY_CTRL +
|
|
(port * SATA_TOP_CTRL_PHY_OFFS);
|
|
void __iomem *p;
|
|
u32 reg;
|
|
|
|
if (priv->quirks & BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE)
|
|
return;
|
|
|
|
/* clear PHY_DEFAULT_POWER_STATE */
|
|
p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_1;
|
|
reg = brcm_sata_readreg(p);
|
|
reg &= ~SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE;
|
|
brcm_sata_writereg(reg, p);
|
|
|
|
/* reset the PHY digital logic */
|
|
p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_2;
|
|
reg = brcm_sata_readreg(p);
|
|
reg &= ~(SATA_TOP_CTRL_2_SW_RST_MDIOREG | SATA_TOP_CTRL_2_SW_RST_OOB |
|
|
SATA_TOP_CTRL_2_SW_RST_RX);
|
|
reg |= SATA_TOP_CTRL_2_SW_RST_TX;
|
|
brcm_sata_writereg(reg, p);
|
|
reg = brcm_sata_readreg(p);
|
|
reg |= SATA_TOP_CTRL_2_PHY_GLOBAL_RESET;
|
|
brcm_sata_writereg(reg, p);
|
|
reg = brcm_sata_readreg(p);
|
|
reg &= ~SATA_TOP_CTRL_2_PHY_GLOBAL_RESET;
|
|
brcm_sata_writereg(reg, p);
|
|
(void)brcm_sata_readreg(p);
|
|
}
|
|
|
|
static void brcm_sata_phy_disable(struct brcm_ahci_priv *priv, int port)
|
|
{
|
|
void __iomem *phyctrl = priv->top_ctrl + SATA_TOP_CTRL_PHY_CTRL +
|
|
(port * SATA_TOP_CTRL_PHY_OFFS);
|
|
void __iomem *p;
|
|
u32 reg;
|
|
|
|
if (priv->quirks & BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE)
|
|
return;
|
|
|
|
/* power-off the PHY digital logic */
|
|
p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_2;
|
|
reg = brcm_sata_readreg(p);
|
|
reg |= (SATA_TOP_CTRL_2_SW_RST_MDIOREG | SATA_TOP_CTRL_2_SW_RST_OOB |
|
|
SATA_TOP_CTRL_2_SW_RST_RX | SATA_TOP_CTRL_2_SW_RST_TX |
|
|
SATA_TOP_CTRL_2_PHY_GLOBAL_RESET);
|
|
brcm_sata_writereg(reg, p);
|
|
|
|
/* set PHY_DEFAULT_POWER_STATE */
|
|
p = phyctrl + SATA_TOP_CTRL_PHY_CTRL_1;
|
|
reg = brcm_sata_readreg(p);
|
|
reg |= SATA_TOP_CTRL_1_PHY_DEFAULT_POWER_STATE;
|
|
brcm_sata_writereg(reg, p);
|
|
}
|
|
|
|
static void brcm_sata_phys_enable(struct brcm_ahci_priv *priv)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < SATA_TOP_MAX_PHYS; i++)
|
|
if (priv->port_mask & BIT(i))
|
|
brcm_sata_phy_enable(priv, i);
|
|
}
|
|
|
|
static void brcm_sata_phys_disable(struct brcm_ahci_priv *priv)
|
|
{
|
|
int i;
|
|
|
|
for (i = 0; i < SATA_TOP_MAX_PHYS; i++)
|
|
if (priv->port_mask & BIT(i))
|
|
brcm_sata_phy_disable(priv, i);
|
|
}
|
|
|
|
static u32 brcm_ahci_get_portmask(struct platform_device *pdev,
|
|
struct brcm_ahci_priv *priv)
|
|
{
|
|
void __iomem *ahci;
|
|
struct resource *res;
|
|
u32 impl;
|
|
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "ahci");
|
|
ahci = devm_ioremap_resource(&pdev->dev, res);
|
|
if (IS_ERR(ahci))
|
|
return 0;
|
|
|
|
impl = readl(ahci + HOST_PORTS_IMPL);
|
|
|
|
if (fls(impl) > SATA_TOP_MAX_PHYS)
|
|
dev_warn(priv->dev, "warning: more ports than PHYs (%#x)\n",
|
|
impl);
|
|
else if (!impl)
|
|
dev_info(priv->dev, "no ports found\n");
|
|
|
|
devm_iounmap(&pdev->dev, ahci);
|
|
devm_release_mem_region(&pdev->dev, res->start, resource_size(res));
|
|
|
|
return impl;
|
|
}
|
|
|
|
static void brcm_sata_init(struct brcm_ahci_priv *priv)
|
|
{
|
|
void __iomem *ctrl = priv->top_ctrl + SATA_TOP_CTRL_BUS_CTRL;
|
|
|
|
/* Configure endianness */
|
|
if (priv->version == BRCM_SATA_NSP) {
|
|
u32 data = brcm_sata_readreg(ctrl);
|
|
|
|
data &= ~((0x03 << DMADATA_ENDIAN_SHIFT) |
|
|
(0x03 << DMADESC_ENDIAN_SHIFT));
|
|
data |= (0x02 << DMADATA_ENDIAN_SHIFT) |
|
|
(0x02 << DMADESC_ENDIAN_SHIFT);
|
|
brcm_sata_writereg(data, ctrl);
|
|
} else
|
|
brcm_sata_writereg(BUS_CTRL_ENDIAN_CONF, ctrl);
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int brcm_ahci_suspend(struct device *dev)
|
|
{
|
|
struct ata_host *host = dev_get_drvdata(dev);
|
|
struct ahci_host_priv *hpriv = host->private_data;
|
|
struct brcm_ahci_priv *priv = hpriv->plat_data;
|
|
int ret;
|
|
|
|
ret = ahci_platform_suspend(dev);
|
|
brcm_sata_phys_disable(priv);
|
|
return ret;
|
|
}
|
|
|
|
static int brcm_ahci_resume(struct device *dev)
|
|
{
|
|
struct ata_host *host = dev_get_drvdata(dev);
|
|
struct ahci_host_priv *hpriv = host->private_data;
|
|
struct brcm_ahci_priv *priv = hpriv->plat_data;
|
|
|
|
brcm_sata_init(priv);
|
|
brcm_sata_phys_enable(priv);
|
|
brcm_sata_alpm_init(hpriv);
|
|
return ahci_platform_resume(dev);
|
|
}
|
|
#endif
|
|
|
|
static struct scsi_host_template ahci_platform_sht = {
|
|
AHCI_SHT(DRV_NAME),
|
|
};
|
|
|
|
static const struct of_device_id ahci_of_match[] = {
|
|
{.compatible = "brcm,bcm7425-ahci", .data = (void *)BRCM_SATA_BCM7425},
|
|
{.compatible = "brcm,bcm7445-ahci", .data = (void *)BRCM_SATA_BCM7445},
|
|
{.compatible = "brcm,bcm-nsp-ahci", .data = (void *)BRCM_SATA_NSP},
|
|
{},
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ahci_of_match);
|
|
|
|
static int brcm_ahci_probe(struct platform_device *pdev)
|
|
{
|
|
const struct of_device_id *of_id;
|
|
struct device *dev = &pdev->dev;
|
|
struct brcm_ahci_priv *priv;
|
|
struct ahci_host_priv *hpriv;
|
|
struct resource *res;
|
|
int ret;
|
|
|
|
priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
|
|
if (!priv)
|
|
return -ENOMEM;
|
|
|
|
of_id = of_match_node(ahci_of_match, pdev->dev.of_node);
|
|
if (!of_id)
|
|
return -ENODEV;
|
|
|
|
priv->version = (enum brcm_ahci_version)of_id->data;
|
|
priv->dev = dev;
|
|
|
|
res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "top-ctrl");
|
|
priv->top_ctrl = devm_ioremap_resource(dev, res);
|
|
if (IS_ERR(priv->top_ctrl))
|
|
return PTR_ERR(priv->top_ctrl);
|
|
|
|
if ((priv->version == BRCM_SATA_BCM7425) ||
|
|
(priv->version == BRCM_SATA_NSP)) {
|
|
priv->quirks |= BRCM_AHCI_QUIRK_NO_NCQ;
|
|
priv->quirks |= BRCM_AHCI_QUIRK_SKIP_PHY_ENABLE;
|
|
}
|
|
|
|
brcm_sata_init(priv);
|
|
|
|
priv->port_mask = brcm_ahci_get_portmask(pdev, priv);
|
|
if (!priv->port_mask)
|
|
return -ENODEV;
|
|
|
|
brcm_sata_phys_enable(priv);
|
|
|
|
hpriv = ahci_platform_get_resources(pdev);
|
|
if (IS_ERR(hpriv))
|
|
return PTR_ERR(hpriv);
|
|
hpriv->plat_data = priv;
|
|
hpriv->flags = AHCI_HFLAG_WAKE_BEFORE_STOP;
|
|
|
|
brcm_sata_alpm_init(hpriv);
|
|
|
|
ret = ahci_platform_enable_resources(hpriv);
|
|
if (ret)
|
|
return ret;
|
|
|
|
if (priv->quirks & BRCM_AHCI_QUIRK_NO_NCQ)
|
|
hpriv->flags |= AHCI_HFLAG_NO_NCQ;
|
|
|
|
ret = ahci_platform_init_host(pdev, hpriv, &ahci_brcm_port_info,
|
|
&ahci_platform_sht);
|
|
if (ret)
|
|
return ret;
|
|
|
|
dev_info(dev, "Broadcom AHCI SATA3 registered\n");
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int brcm_ahci_remove(struct platform_device *pdev)
|
|
{
|
|
struct ata_host *host = dev_get_drvdata(&pdev->dev);
|
|
struct ahci_host_priv *hpriv = host->private_data;
|
|
struct brcm_ahci_priv *priv = hpriv->plat_data;
|
|
int ret;
|
|
|
|
ret = ata_platform_remove_one(pdev);
|
|
if (ret)
|
|
return ret;
|
|
|
|
brcm_sata_phys_disable(priv);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(ahci_brcm_pm_ops, brcm_ahci_suspend, brcm_ahci_resume);
|
|
|
|
static struct platform_driver brcm_ahci_driver = {
|
|
.probe = brcm_ahci_probe,
|
|
.remove = brcm_ahci_remove,
|
|
.driver = {
|
|
.name = DRV_NAME,
|
|
.of_match_table = ahci_of_match,
|
|
.pm = &ahci_brcm_pm_ops,
|
|
},
|
|
};
|
|
module_platform_driver(brcm_ahci_driver);
|
|
|
|
MODULE_DESCRIPTION("Broadcom SATA3 AHCI Controller Driver");
|
|
MODULE_AUTHOR("Brian Norris");
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_ALIAS("platform:sata-brcmstb");
|