linux-sg2042/drivers/usb
Alex He f6ba6fe2d9 xHCI 1.0: Incompatible Device Error
It is one new TRB Completion Code for the xHCI spec v1.0.
Asserted if the xHC detects a problem with a device that does not allow it to
be successfully accessed, e.g. due to a device compliance or compatibility
problem. This error may be returned by any command or transfer, and is fatal
as far as the Slot is concerned. Return -EPROTO by urb->status or frame->status
of ISOC for transfer case. And return -ENODEV for configure endpoint command,
evaluate context command and address device command if there is an incompatible
Device Error. The error codes will be sent back to the USB core to decide how
to do. It's unnecessary for other commands because after the three commands run
successfully means that the device has been accepted.

Signed-off-by: Alex He <alex.he@amd.com>
Signed-off-by: Sarah Sharp <sarah.a.sharp@linux.intel.com>
2011-06-17 11:28:08 -07:00
..
atm Fix common misspellings 2011-03-31 11:26:23 -03:00
c67x00 Fix common misspellings 2011-03-31 11:26:23 -03:00
class USB: cdc-acm: Adding second ACM channel support for Nokia E7 and C7 2011-06-06 15:59:41 -07:00
core USB: Free bandwidth when usb_disable_device is called. 2011-06-15 14:05:18 -07:00
early USB: EHCI: Support controllers with big endian capability regs 2011-05-03 11:43:21 -07:00
gadget USB: CONFIG_USB_GADGET_DUALSPEED is not user-configurable 2011-06-07 09:05:44 -07:00
host xHCI 1.0: Incompatible Device Error 2011-06-17 11:28:08 -07:00
image Fix common misspellings 2011-03-31 11:26:23 -03:00
misc Merge branch 'usb-next' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6 2011-05-23 12:33:02 -07:00
mon USB: usbmon: fix-up docs and text API for sparse ISO 2011-02-04 11:46:57 -08:00
musb usb: musb: gadget: clear TXPKTRDY flag when set FLUSHFIFO 2011-06-09 12:01:03 +03:00
otg USB: TWL6025 allow different regulator name 2011-05-27 10:49:30 +01:00
renesas_usbhs usb/renesas_usbhs: free uep on removal 2011-06-06 16:28:04 -07:00
serial USB: TI 3410/5052 USB Serial Driver: Fix mem leak when firmware is too big. 2011-06-14 14:20:30 -07:00
storage usb-storage: redo incorrect reads 2011-06-07 09:05:42 -07:00
wusbcore Fix common misspellings 2011-03-31 11:26:23 -03:00
Kconfig USB: EHCI: Add bus glue for GRLIB GRUSBHC controller 2011-05-03 11:43:48 -07:00
Makefile USB: fix build of FSL MPH DR OF platform driver 2011-05-02 16:59:37 -07:00
README
usb-skeleton.c llseek: automatically add .llseek fop 2010-10-15 15:53:27 +02:00

README

To understand all the Linux-USB framework, you'll use these resources:

    * This source code.  This is necessarily an evolving work, and
      includes kerneldoc that should help you get a current overview.
      ("make pdfdocs", and then look at "usb.pdf" for host side and
      "gadget.pdf" for peripheral side.)  Also, Documentation/usb has
      more information.

    * The USB 2.0 specification (from www.usb.org), with supplements
      such as those for USB OTG and the various device classes.
      The USB specification has a good overview chapter, and USB
      peripherals conform to the widely known "Chapter 9".

    * Chip specifications for USB controllers.  Examples include
      host controllers (on PCs, servers, and more); peripheral
      controllers (in devices with Linux firmware, like printers or
      cell phones); and hard-wired peripherals like Ethernet adapters.

    * Specifications for other protocols implemented by USB peripheral
      functions.  Some are vendor-specific; others are vendor-neutral
      but just standardized outside of the www.usb.org team.

Here is a list of what each subdirectory here is, and what is contained in
them.

core/		- This is for the core USB host code, including the
		  usbfs files and the hub class driver ("khubd").

host/		- This is for USB host controller drivers.  This
		  includes UHCI, OHCI, EHCI, and others that might
		  be used with more specialized "embedded" systems.

gadget/		- This is for USB peripheral controller drivers and
		  the various gadget drivers which talk to them.


Individual USB driver directories.  A new driver should be added to the
first subdirectory in the list below that it fits into.

image/		- This is for still image drivers, like scanners or
		  digital cameras.
../input/	- This is for any driver that uses the input subsystem,
		  like keyboard, mice, touchscreens, tablets, etc.
../media/	- This is for multimedia drivers, like video cameras,
		  radios, and any other drivers that talk to the v4l
		  subsystem.
../net/		- This is for network drivers.
serial/		- This is for USB to serial drivers.
storage/	- This is for USB mass-storage drivers.
class/		- This is for all USB device drivers that do not fit
		  into any of the above categories, and work for a range
		  of USB Class specified devices. 
misc/		- This is for all USB device drivers that do not fit
		  into any of the above categories.