1234 lines
35 KiB
C
1234 lines
35 KiB
C
/*
|
|
* Driver for the Conexant CX23885/7/8 PCIe bridge
|
|
*
|
|
* CX23888 Integrated Consumer Infrared Controller
|
|
*
|
|
* Copyright (C) 2009 Andy Walls <awalls@md.metrocast.net>
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*/
|
|
|
|
#include "cx23885.h"
|
|
#include "cx23888-ir.h"
|
|
|
|
#include <linux/kfifo.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <media/v4l2-device.h>
|
|
#include <media/rc-core.h>
|
|
|
|
static unsigned int ir_888_debug;
|
|
module_param(ir_888_debug, int, 0644);
|
|
MODULE_PARM_DESC(ir_888_debug, "enable debug messages [CX23888 IR controller]");
|
|
|
|
#define CX23888_IR_REG_BASE 0x170000
|
|
/*
|
|
* These CX23888 register offsets have a straightforward one to one mapping
|
|
* to the CX23885 register offsets of 0x200 through 0x218
|
|
*/
|
|
#define CX23888_IR_CNTRL_REG 0x170000
|
|
#define CNTRL_WIN_3_3 0x00000000
|
|
#define CNTRL_WIN_4_3 0x00000001
|
|
#define CNTRL_WIN_3_4 0x00000002
|
|
#define CNTRL_WIN_4_4 0x00000003
|
|
#define CNTRL_WIN 0x00000003
|
|
#define CNTRL_EDG_NONE 0x00000000
|
|
#define CNTRL_EDG_FALL 0x00000004
|
|
#define CNTRL_EDG_RISE 0x00000008
|
|
#define CNTRL_EDG_BOTH 0x0000000C
|
|
#define CNTRL_EDG 0x0000000C
|
|
#define CNTRL_DMD 0x00000010
|
|
#define CNTRL_MOD 0x00000020
|
|
#define CNTRL_RFE 0x00000040
|
|
#define CNTRL_TFE 0x00000080
|
|
#define CNTRL_RXE 0x00000100
|
|
#define CNTRL_TXE 0x00000200
|
|
#define CNTRL_RIC 0x00000400
|
|
#define CNTRL_TIC 0x00000800
|
|
#define CNTRL_CPL 0x00001000
|
|
#define CNTRL_LBM 0x00002000
|
|
#define CNTRL_R 0x00004000
|
|
/* CX23888 specific control flag */
|
|
#define CNTRL_IVO 0x00008000
|
|
|
|
#define CX23888_IR_TXCLK_REG 0x170004
|
|
#define TXCLK_TCD 0x0000FFFF
|
|
|
|
#define CX23888_IR_RXCLK_REG 0x170008
|
|
#define RXCLK_RCD 0x0000FFFF
|
|
|
|
#define CX23888_IR_CDUTY_REG 0x17000C
|
|
#define CDUTY_CDC 0x0000000F
|
|
|
|
#define CX23888_IR_STATS_REG 0x170010
|
|
#define STATS_RTO 0x00000001
|
|
#define STATS_ROR 0x00000002
|
|
#define STATS_RBY 0x00000004
|
|
#define STATS_TBY 0x00000008
|
|
#define STATS_RSR 0x00000010
|
|
#define STATS_TSR 0x00000020
|
|
|
|
#define CX23888_IR_IRQEN_REG 0x170014
|
|
#define IRQEN_RTE 0x00000001
|
|
#define IRQEN_ROE 0x00000002
|
|
#define IRQEN_RSE 0x00000010
|
|
#define IRQEN_TSE 0x00000020
|
|
|
|
#define CX23888_IR_FILTR_REG 0x170018
|
|
#define FILTR_LPF 0x0000FFFF
|
|
|
|
/* This register doesn't follow the pattern; it's 0x23C on a CX23885 */
|
|
#define CX23888_IR_FIFO_REG 0x170040
|
|
#define FIFO_RXTX 0x0000FFFF
|
|
#define FIFO_RXTX_LVL 0x00010000
|
|
#define FIFO_RXTX_RTO 0x0001FFFF
|
|
#define FIFO_RX_NDV 0x00020000
|
|
#define FIFO_RX_DEPTH 8
|
|
#define FIFO_TX_DEPTH 8
|
|
|
|
/* CX23888 unique registers */
|
|
#define CX23888_IR_SEEDP_REG 0x17001C
|
|
#define CX23888_IR_TIMOL_REG 0x170020
|
|
#define CX23888_IR_WAKE0_REG 0x170024
|
|
#define CX23888_IR_WAKE1_REG 0x170028
|
|
#define CX23888_IR_WAKE2_REG 0x17002C
|
|
#define CX23888_IR_MASK0_REG 0x170030
|
|
#define CX23888_IR_MASK1_REG 0x170034
|
|
#define CX23888_IR_MAKS2_REG 0x170038
|
|
#define CX23888_IR_DPIPG_REG 0x17003C
|
|
#define CX23888_IR_LEARN_REG 0x170044
|
|
|
|
#define CX23888_VIDCLK_FREQ 108000000 /* 108 MHz, BT.656 */
|
|
#define CX23888_IR_REFCLK_FREQ (CX23888_VIDCLK_FREQ / 2)
|
|
|
|
/*
|
|
* We use this union internally for convenience, but callers to tx_write
|
|
* and rx_read will be expecting records of type struct ir_raw_event.
|
|
* Always ensure the size of this union is dictated by struct ir_raw_event.
|
|
*/
|
|
union cx23888_ir_fifo_rec {
|
|
u32 hw_fifo_data;
|
|
struct ir_raw_event ir_core_data;
|
|
};
|
|
|
|
#define CX23888_IR_RX_KFIFO_SIZE (256 * sizeof(union cx23888_ir_fifo_rec))
|
|
#define CX23888_IR_TX_KFIFO_SIZE (256 * sizeof(union cx23888_ir_fifo_rec))
|
|
|
|
struct cx23888_ir_state {
|
|
struct v4l2_subdev sd;
|
|
struct cx23885_dev *dev;
|
|
|
|
struct v4l2_subdev_ir_parameters rx_params;
|
|
struct mutex rx_params_lock;
|
|
atomic_t rxclk_divider;
|
|
atomic_t rx_invert;
|
|
|
|
struct kfifo rx_kfifo;
|
|
spinlock_t rx_kfifo_lock;
|
|
|
|
struct v4l2_subdev_ir_parameters tx_params;
|
|
struct mutex tx_params_lock;
|
|
atomic_t txclk_divider;
|
|
};
|
|
|
|
static inline struct cx23888_ir_state *to_state(struct v4l2_subdev *sd)
|
|
{
|
|
return v4l2_get_subdevdata(sd);
|
|
}
|
|
|
|
/*
|
|
* IR register block read and write functions
|
|
*/
|
|
static
|
|
inline int cx23888_ir_write4(struct cx23885_dev *dev, u32 addr, u32 value)
|
|
{
|
|
cx_write(addr, value);
|
|
return 0;
|
|
}
|
|
|
|
static inline u32 cx23888_ir_read4(struct cx23885_dev *dev, u32 addr)
|
|
{
|
|
return cx_read(addr);
|
|
}
|
|
|
|
static inline int cx23888_ir_and_or4(struct cx23885_dev *dev, u32 addr,
|
|
u32 and_mask, u32 or_value)
|
|
{
|
|
cx_andor(addr, ~and_mask, or_value);
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Rx and Tx Clock Divider register computations
|
|
*
|
|
* Note the largest clock divider value of 0xffff corresponds to:
|
|
* (0xffff + 1) * 1000 / 108/2 MHz = 1,213,629.629... ns
|
|
* which fits in 21 bits, so we'll use unsigned int for time arguments.
|
|
*/
|
|
static inline u16 count_to_clock_divider(unsigned int d)
|
|
{
|
|
if (d > RXCLK_RCD + 1)
|
|
d = RXCLK_RCD;
|
|
else if (d < 2)
|
|
d = 1;
|
|
else
|
|
d--;
|
|
return (u16) d;
|
|
}
|
|
|
|
static inline u16 ns_to_clock_divider(unsigned int ns)
|
|
{
|
|
return count_to_clock_divider(
|
|
DIV_ROUND_CLOSEST(CX23888_IR_REFCLK_FREQ / 1000000 * ns, 1000));
|
|
}
|
|
|
|
static inline unsigned int clock_divider_to_ns(unsigned int divider)
|
|
{
|
|
/* Period of the Rx or Tx clock in ns */
|
|
return DIV_ROUND_CLOSEST((divider + 1) * 1000,
|
|
CX23888_IR_REFCLK_FREQ / 1000000);
|
|
}
|
|
|
|
static inline u16 carrier_freq_to_clock_divider(unsigned int freq)
|
|
{
|
|
return count_to_clock_divider(
|
|
DIV_ROUND_CLOSEST(CX23888_IR_REFCLK_FREQ, freq * 16));
|
|
}
|
|
|
|
static inline unsigned int clock_divider_to_carrier_freq(unsigned int divider)
|
|
{
|
|
return DIV_ROUND_CLOSEST(CX23888_IR_REFCLK_FREQ, (divider + 1) * 16);
|
|
}
|
|
|
|
static inline u16 freq_to_clock_divider(unsigned int freq,
|
|
unsigned int rollovers)
|
|
{
|
|
return count_to_clock_divider(
|
|
DIV_ROUND_CLOSEST(CX23888_IR_REFCLK_FREQ, freq * rollovers));
|
|
}
|
|
|
|
static inline unsigned int clock_divider_to_freq(unsigned int divider,
|
|
unsigned int rollovers)
|
|
{
|
|
return DIV_ROUND_CLOSEST(CX23888_IR_REFCLK_FREQ,
|
|
(divider + 1) * rollovers);
|
|
}
|
|
|
|
/*
|
|
* Low Pass Filter register calculations
|
|
*
|
|
* Note the largest count value of 0xffff corresponds to:
|
|
* 0xffff * 1000 / 108/2 MHz = 1,213,611.11... ns
|
|
* which fits in 21 bits, so we'll use unsigned int for time arguments.
|
|
*/
|
|
static inline u16 count_to_lpf_count(unsigned int d)
|
|
{
|
|
if (d > FILTR_LPF)
|
|
d = FILTR_LPF;
|
|
else if (d < 4)
|
|
d = 0;
|
|
return (u16) d;
|
|
}
|
|
|
|
static inline u16 ns_to_lpf_count(unsigned int ns)
|
|
{
|
|
return count_to_lpf_count(
|
|
DIV_ROUND_CLOSEST(CX23888_IR_REFCLK_FREQ / 1000000 * ns, 1000));
|
|
}
|
|
|
|
static inline unsigned int lpf_count_to_ns(unsigned int count)
|
|
{
|
|
/* Duration of the Low Pass Filter rejection window in ns */
|
|
return DIV_ROUND_CLOSEST(count * 1000,
|
|
CX23888_IR_REFCLK_FREQ / 1000000);
|
|
}
|
|
|
|
static inline unsigned int lpf_count_to_us(unsigned int count)
|
|
{
|
|
/* Duration of the Low Pass Filter rejection window in us */
|
|
return DIV_ROUND_CLOSEST(count, CX23888_IR_REFCLK_FREQ / 1000000);
|
|
}
|
|
|
|
/*
|
|
* FIFO register pulse width count computations
|
|
*/
|
|
static u32 clock_divider_to_resolution(u16 divider)
|
|
{
|
|
/*
|
|
* Resolution is the duration of 1 tick of the readable portion of
|
|
* of the pulse width counter as read from the FIFO. The two lsb's are
|
|
* not readable, hence the << 2. This function returns ns.
|
|
*/
|
|
return DIV_ROUND_CLOSEST((1 << 2) * ((u32) divider + 1) * 1000,
|
|
CX23888_IR_REFCLK_FREQ / 1000000);
|
|
}
|
|
|
|
static u64 pulse_width_count_to_ns(u16 count, u16 divider)
|
|
{
|
|
u64 n;
|
|
u32 rem;
|
|
|
|
/*
|
|
* The 2 lsb's of the pulse width timer count are not readable, hence
|
|
* the (count << 2) | 0x3
|
|
*/
|
|
n = (((u64) count << 2) | 0x3) * (divider + 1) * 1000; /* millicycles */
|
|
rem = do_div(n, CX23888_IR_REFCLK_FREQ / 1000000); /* / MHz => ns */
|
|
if (rem >= CX23888_IR_REFCLK_FREQ / 1000000 / 2)
|
|
n++;
|
|
return n;
|
|
}
|
|
|
|
static unsigned int pulse_width_count_to_us(u16 count, u16 divider)
|
|
{
|
|
u64 n;
|
|
u32 rem;
|
|
|
|
/*
|
|
* The 2 lsb's of the pulse width timer count are not readable, hence
|
|
* the (count << 2) | 0x3
|
|
*/
|
|
n = (((u64) count << 2) | 0x3) * (divider + 1); /* cycles */
|
|
rem = do_div(n, CX23888_IR_REFCLK_FREQ / 1000000); /* / MHz => us */
|
|
if (rem >= CX23888_IR_REFCLK_FREQ / 1000000 / 2)
|
|
n++;
|
|
return (unsigned int) n;
|
|
}
|
|
|
|
/*
|
|
* Pulse Clocks computations: Combined Pulse Width Count & Rx Clock Counts
|
|
*
|
|
* The total pulse clock count is an 18 bit pulse width timer count as the most
|
|
* significant part and (up to) 16 bit clock divider count as a modulus.
|
|
* When the Rx clock divider ticks down to 0, it increments the 18 bit pulse
|
|
* width timer count's least significant bit.
|
|
*/
|
|
static u64 ns_to_pulse_clocks(u32 ns)
|
|
{
|
|
u64 clocks;
|
|
u32 rem;
|
|
clocks = CX23888_IR_REFCLK_FREQ / 1000000 * (u64) ns; /* millicycles */
|
|
rem = do_div(clocks, 1000); /* /1000 = cycles */
|
|
if (rem >= 1000 / 2)
|
|
clocks++;
|
|
return clocks;
|
|
}
|
|
|
|
static u16 pulse_clocks_to_clock_divider(u64 count)
|
|
{
|
|
do_div(count, (FIFO_RXTX << 2) | 0x3);
|
|
|
|
/* net result needs to be rounded down and decremented by 1 */
|
|
if (count > RXCLK_RCD + 1)
|
|
count = RXCLK_RCD;
|
|
else if (count < 2)
|
|
count = 1;
|
|
else
|
|
count--;
|
|
return (u16) count;
|
|
}
|
|
|
|
/*
|
|
* IR Control Register helpers
|
|
*/
|
|
enum tx_fifo_watermark {
|
|
TX_FIFO_HALF_EMPTY = 0,
|
|
TX_FIFO_EMPTY = CNTRL_TIC,
|
|
};
|
|
|
|
enum rx_fifo_watermark {
|
|
RX_FIFO_HALF_FULL = 0,
|
|
RX_FIFO_NOT_EMPTY = CNTRL_RIC,
|
|
};
|
|
|
|
static inline void control_tx_irq_watermark(struct cx23885_dev *dev,
|
|
enum tx_fifo_watermark level)
|
|
{
|
|
cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~CNTRL_TIC, level);
|
|
}
|
|
|
|
static inline void control_rx_irq_watermark(struct cx23885_dev *dev,
|
|
enum rx_fifo_watermark level)
|
|
{
|
|
cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~CNTRL_RIC, level);
|
|
}
|
|
|
|
static inline void control_tx_enable(struct cx23885_dev *dev, bool enable)
|
|
{
|
|
cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~(CNTRL_TXE | CNTRL_TFE),
|
|
enable ? (CNTRL_TXE | CNTRL_TFE) : 0);
|
|
}
|
|
|
|
static inline void control_rx_enable(struct cx23885_dev *dev, bool enable)
|
|
{
|
|
cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~(CNTRL_RXE | CNTRL_RFE),
|
|
enable ? (CNTRL_RXE | CNTRL_RFE) : 0);
|
|
}
|
|
|
|
static inline void control_tx_modulation_enable(struct cx23885_dev *dev,
|
|
bool enable)
|
|
{
|
|
cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~CNTRL_MOD,
|
|
enable ? CNTRL_MOD : 0);
|
|
}
|
|
|
|
static inline void control_rx_demodulation_enable(struct cx23885_dev *dev,
|
|
bool enable)
|
|
{
|
|
cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~CNTRL_DMD,
|
|
enable ? CNTRL_DMD : 0);
|
|
}
|
|
|
|
static inline void control_rx_s_edge_detection(struct cx23885_dev *dev,
|
|
u32 edge_types)
|
|
{
|
|
cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~CNTRL_EDG_BOTH,
|
|
edge_types & CNTRL_EDG_BOTH);
|
|
}
|
|
|
|
static void control_rx_s_carrier_window(struct cx23885_dev *dev,
|
|
unsigned int carrier,
|
|
unsigned int *carrier_range_low,
|
|
unsigned int *carrier_range_high)
|
|
{
|
|
u32 v;
|
|
unsigned int c16 = carrier * 16;
|
|
|
|
if (*carrier_range_low < DIV_ROUND_CLOSEST(c16, 16 + 3)) {
|
|
v = CNTRL_WIN_3_4;
|
|
*carrier_range_low = DIV_ROUND_CLOSEST(c16, 16 + 4);
|
|
} else {
|
|
v = CNTRL_WIN_3_3;
|
|
*carrier_range_low = DIV_ROUND_CLOSEST(c16, 16 + 3);
|
|
}
|
|
|
|
if (*carrier_range_high > DIV_ROUND_CLOSEST(c16, 16 - 3)) {
|
|
v |= CNTRL_WIN_4_3;
|
|
*carrier_range_high = DIV_ROUND_CLOSEST(c16, 16 - 4);
|
|
} else {
|
|
v |= CNTRL_WIN_3_3;
|
|
*carrier_range_high = DIV_ROUND_CLOSEST(c16, 16 - 3);
|
|
}
|
|
cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~CNTRL_WIN, v);
|
|
}
|
|
|
|
static inline void control_tx_polarity_invert(struct cx23885_dev *dev,
|
|
bool invert)
|
|
{
|
|
cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~CNTRL_CPL,
|
|
invert ? CNTRL_CPL : 0);
|
|
}
|
|
|
|
static inline void control_tx_level_invert(struct cx23885_dev *dev,
|
|
bool invert)
|
|
{
|
|
cx23888_ir_and_or4(dev, CX23888_IR_CNTRL_REG, ~CNTRL_IVO,
|
|
invert ? CNTRL_IVO : 0);
|
|
}
|
|
|
|
/*
|
|
* IR Rx & Tx Clock Register helpers
|
|
*/
|
|
static unsigned int txclk_tx_s_carrier(struct cx23885_dev *dev,
|
|
unsigned int freq,
|
|
u16 *divider)
|
|
{
|
|
*divider = carrier_freq_to_clock_divider(freq);
|
|
cx23888_ir_write4(dev, CX23888_IR_TXCLK_REG, *divider);
|
|
return clock_divider_to_carrier_freq(*divider);
|
|
}
|
|
|
|
static unsigned int rxclk_rx_s_carrier(struct cx23885_dev *dev,
|
|
unsigned int freq,
|
|
u16 *divider)
|
|
{
|
|
*divider = carrier_freq_to_clock_divider(freq);
|
|
cx23888_ir_write4(dev, CX23888_IR_RXCLK_REG, *divider);
|
|
return clock_divider_to_carrier_freq(*divider);
|
|
}
|
|
|
|
static u32 txclk_tx_s_max_pulse_width(struct cx23885_dev *dev, u32 ns,
|
|
u16 *divider)
|
|
{
|
|
u64 pulse_clocks;
|
|
|
|
if (ns > IR_MAX_DURATION)
|
|
ns = IR_MAX_DURATION;
|
|
pulse_clocks = ns_to_pulse_clocks(ns);
|
|
*divider = pulse_clocks_to_clock_divider(pulse_clocks);
|
|
cx23888_ir_write4(dev, CX23888_IR_TXCLK_REG, *divider);
|
|
return (u32) pulse_width_count_to_ns(FIFO_RXTX, *divider);
|
|
}
|
|
|
|
static u32 rxclk_rx_s_max_pulse_width(struct cx23885_dev *dev, u32 ns,
|
|
u16 *divider)
|
|
{
|
|
u64 pulse_clocks;
|
|
|
|
if (ns > IR_MAX_DURATION)
|
|
ns = IR_MAX_DURATION;
|
|
pulse_clocks = ns_to_pulse_clocks(ns);
|
|
*divider = pulse_clocks_to_clock_divider(pulse_clocks);
|
|
cx23888_ir_write4(dev, CX23888_IR_RXCLK_REG, *divider);
|
|
return (u32) pulse_width_count_to_ns(FIFO_RXTX, *divider);
|
|
}
|
|
|
|
/*
|
|
* IR Tx Carrier Duty Cycle register helpers
|
|
*/
|
|
static unsigned int cduty_tx_s_duty_cycle(struct cx23885_dev *dev,
|
|
unsigned int duty_cycle)
|
|
{
|
|
u32 n;
|
|
n = DIV_ROUND_CLOSEST(duty_cycle * 100, 625); /* 16ths of 100% */
|
|
if (n != 0)
|
|
n--;
|
|
if (n > 15)
|
|
n = 15;
|
|
cx23888_ir_write4(dev, CX23888_IR_CDUTY_REG, n);
|
|
return DIV_ROUND_CLOSEST((n + 1) * 100, 16);
|
|
}
|
|
|
|
/*
|
|
* IR Filter Register helpers
|
|
*/
|
|
static u32 filter_rx_s_min_width(struct cx23885_dev *dev, u32 min_width_ns)
|
|
{
|
|
u32 count = ns_to_lpf_count(min_width_ns);
|
|
cx23888_ir_write4(dev, CX23888_IR_FILTR_REG, count);
|
|
return lpf_count_to_ns(count);
|
|
}
|
|
|
|
/*
|
|
* IR IRQ Enable Register helpers
|
|
*/
|
|
static inline void irqenable_rx(struct cx23885_dev *dev, u32 mask)
|
|
{
|
|
mask &= (IRQEN_RTE | IRQEN_ROE | IRQEN_RSE);
|
|
cx23888_ir_and_or4(dev, CX23888_IR_IRQEN_REG,
|
|
~(IRQEN_RTE | IRQEN_ROE | IRQEN_RSE), mask);
|
|
}
|
|
|
|
static inline void irqenable_tx(struct cx23885_dev *dev, u32 mask)
|
|
{
|
|
mask &= IRQEN_TSE;
|
|
cx23888_ir_and_or4(dev, CX23888_IR_IRQEN_REG, ~IRQEN_TSE, mask);
|
|
}
|
|
|
|
/*
|
|
* V4L2 Subdevice IR Ops
|
|
*/
|
|
static int cx23888_ir_irq_handler(struct v4l2_subdev *sd, u32 status,
|
|
bool *handled)
|
|
{
|
|
struct cx23888_ir_state *state = to_state(sd);
|
|
struct cx23885_dev *dev = state->dev;
|
|
unsigned long flags;
|
|
|
|
u32 cntrl = cx23888_ir_read4(dev, CX23888_IR_CNTRL_REG);
|
|
u32 irqen = cx23888_ir_read4(dev, CX23888_IR_IRQEN_REG);
|
|
u32 stats = cx23888_ir_read4(dev, CX23888_IR_STATS_REG);
|
|
|
|
union cx23888_ir_fifo_rec rx_data[FIFO_RX_DEPTH];
|
|
unsigned int i, j, k;
|
|
u32 events, v;
|
|
int tsr, rsr, rto, ror, tse, rse, rte, roe, kror;
|
|
|
|
tsr = stats & STATS_TSR; /* Tx FIFO Service Request */
|
|
rsr = stats & STATS_RSR; /* Rx FIFO Service Request */
|
|
rto = stats & STATS_RTO; /* Rx Pulse Width Timer Time Out */
|
|
ror = stats & STATS_ROR; /* Rx FIFO Over Run */
|
|
|
|
tse = irqen & IRQEN_TSE; /* Tx FIFO Service Request IRQ Enable */
|
|
rse = irqen & IRQEN_RSE; /* Rx FIFO Service Reuqest IRQ Enable */
|
|
rte = irqen & IRQEN_RTE; /* Rx Pulse Width Timer Time Out IRQ Enable */
|
|
roe = irqen & IRQEN_ROE; /* Rx FIFO Over Run IRQ Enable */
|
|
|
|
*handled = false;
|
|
v4l2_dbg(2, ir_888_debug, sd, "IRQ Status: %s %s %s %s %s %s\n",
|
|
tsr ? "tsr" : " ", rsr ? "rsr" : " ",
|
|
rto ? "rto" : " ", ror ? "ror" : " ",
|
|
stats & STATS_TBY ? "tby" : " ",
|
|
stats & STATS_RBY ? "rby" : " ");
|
|
|
|
v4l2_dbg(2, ir_888_debug, sd, "IRQ Enables: %s %s %s %s\n",
|
|
tse ? "tse" : " ", rse ? "rse" : " ",
|
|
rte ? "rte" : " ", roe ? "roe" : " ");
|
|
|
|
/*
|
|
* Transmitter interrupt service
|
|
*/
|
|
if (tse && tsr) {
|
|
/*
|
|
* TODO:
|
|
* Check the watermark threshold setting
|
|
* Pull FIFO_TX_DEPTH or FIFO_TX_DEPTH/2 entries from tx_kfifo
|
|
* Push the data to the hardware FIFO.
|
|
* If there was nothing more to send in the tx_kfifo, disable
|
|
* the TSR IRQ and notify the v4l2_device.
|
|
* If there was something in the tx_kfifo, check the tx_kfifo
|
|
* level and notify the v4l2_device, if it is low.
|
|
*/
|
|
/* For now, inhibit TSR interrupt until Tx is implemented */
|
|
irqenable_tx(dev, 0);
|
|
events = V4L2_SUBDEV_IR_TX_FIFO_SERVICE_REQ;
|
|
v4l2_subdev_notify(sd, V4L2_SUBDEV_IR_TX_NOTIFY, &events);
|
|
*handled = true;
|
|
}
|
|
|
|
/*
|
|
* Receiver interrupt service
|
|
*/
|
|
kror = 0;
|
|
if ((rse && rsr) || (rte && rto)) {
|
|
/*
|
|
* Receive data on RSR to clear the STATS_RSR.
|
|
* Receive data on RTO, since we may not have yet hit the RSR
|
|
* watermark when we receive the RTO.
|
|
*/
|
|
for (i = 0, v = FIFO_RX_NDV;
|
|
(v & FIFO_RX_NDV) && !kror; i = 0) {
|
|
for (j = 0;
|
|
(v & FIFO_RX_NDV) && j < FIFO_RX_DEPTH; j++) {
|
|
v = cx23888_ir_read4(dev, CX23888_IR_FIFO_REG);
|
|
rx_data[i].hw_fifo_data = v & ~FIFO_RX_NDV;
|
|
i++;
|
|
}
|
|
if (i == 0)
|
|
break;
|
|
j = i * sizeof(union cx23888_ir_fifo_rec);
|
|
k = kfifo_in_locked(&state->rx_kfifo,
|
|
(unsigned char *) rx_data, j,
|
|
&state->rx_kfifo_lock);
|
|
if (k != j)
|
|
kror++; /* rx_kfifo over run */
|
|
}
|
|
*handled = true;
|
|
}
|
|
|
|
events = 0;
|
|
v = 0;
|
|
if (kror) {
|
|
events |= V4L2_SUBDEV_IR_RX_SW_FIFO_OVERRUN;
|
|
v4l2_err(sd, "IR receiver software FIFO overrun\n");
|
|
}
|
|
if (roe && ror) {
|
|
/*
|
|
* The RX FIFO Enable (CNTRL_RFE) must be toggled to clear
|
|
* the Rx FIFO Over Run status (STATS_ROR)
|
|
*/
|
|
v |= CNTRL_RFE;
|
|
events |= V4L2_SUBDEV_IR_RX_HW_FIFO_OVERRUN;
|
|
v4l2_err(sd, "IR receiver hardware FIFO overrun\n");
|
|
}
|
|
if (rte && rto) {
|
|
/*
|
|
* The IR Receiver Enable (CNTRL_RXE) must be toggled to clear
|
|
* the Rx Pulse Width Timer Time Out (STATS_RTO)
|
|
*/
|
|
v |= CNTRL_RXE;
|
|
events |= V4L2_SUBDEV_IR_RX_END_OF_RX_DETECTED;
|
|
}
|
|
if (v) {
|
|
/* Clear STATS_ROR & STATS_RTO as needed by reseting hardware */
|
|
cx23888_ir_write4(dev, CX23888_IR_CNTRL_REG, cntrl & ~v);
|
|
cx23888_ir_write4(dev, CX23888_IR_CNTRL_REG, cntrl);
|
|
*handled = true;
|
|
}
|
|
|
|
spin_lock_irqsave(&state->rx_kfifo_lock, flags);
|
|
if (kfifo_len(&state->rx_kfifo) >= CX23888_IR_RX_KFIFO_SIZE / 2)
|
|
events |= V4L2_SUBDEV_IR_RX_FIFO_SERVICE_REQ;
|
|
spin_unlock_irqrestore(&state->rx_kfifo_lock, flags);
|
|
|
|
if (events)
|
|
v4l2_subdev_notify(sd, V4L2_SUBDEV_IR_RX_NOTIFY, &events);
|
|
return 0;
|
|
}
|
|
|
|
/* Receiver */
|
|
static int cx23888_ir_rx_read(struct v4l2_subdev *sd, u8 *buf, size_t count,
|
|
ssize_t *num)
|
|
{
|
|
struct cx23888_ir_state *state = to_state(sd);
|
|
bool invert = (bool) atomic_read(&state->rx_invert);
|
|
u16 divider = (u16) atomic_read(&state->rxclk_divider);
|
|
|
|
unsigned int i, n;
|
|
union cx23888_ir_fifo_rec *p;
|
|
unsigned u, v, w;
|
|
|
|
n = count / sizeof(union cx23888_ir_fifo_rec)
|
|
* sizeof(union cx23888_ir_fifo_rec);
|
|
if (n == 0) {
|
|
*num = 0;
|
|
return 0;
|
|
}
|
|
|
|
n = kfifo_out_locked(&state->rx_kfifo, buf, n, &state->rx_kfifo_lock);
|
|
|
|
n /= sizeof(union cx23888_ir_fifo_rec);
|
|
*num = n * sizeof(union cx23888_ir_fifo_rec);
|
|
|
|
for (p = (union cx23888_ir_fifo_rec *) buf, i = 0; i < n; p++, i++) {
|
|
|
|
if ((p->hw_fifo_data & FIFO_RXTX_RTO) == FIFO_RXTX_RTO) {
|
|
/* Assume RTO was because of no IR light input */
|
|
u = 0;
|
|
w = 1;
|
|
} else {
|
|
u = (p->hw_fifo_data & FIFO_RXTX_LVL) ? 1 : 0;
|
|
if (invert)
|
|
u = u ? 0 : 1;
|
|
w = 0;
|
|
}
|
|
|
|
v = (unsigned) pulse_width_count_to_ns(
|
|
(u16) (p->hw_fifo_data & FIFO_RXTX), divider);
|
|
if (v > IR_MAX_DURATION)
|
|
v = IR_MAX_DURATION;
|
|
|
|
init_ir_raw_event(&p->ir_core_data);
|
|
p->ir_core_data.pulse = u;
|
|
p->ir_core_data.duration = v;
|
|
p->ir_core_data.timeout = w;
|
|
|
|
v4l2_dbg(2, ir_888_debug, sd, "rx read: %10u ns %s %s\n",
|
|
v, u ? "mark" : "space", w ? "(timed out)" : "");
|
|
if (w)
|
|
v4l2_dbg(2, ir_888_debug, sd, "rx read: end of rx\n");
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int cx23888_ir_rx_g_parameters(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_ir_parameters *p)
|
|
{
|
|
struct cx23888_ir_state *state = to_state(sd);
|
|
mutex_lock(&state->rx_params_lock);
|
|
memcpy(p, &state->rx_params, sizeof(struct v4l2_subdev_ir_parameters));
|
|
mutex_unlock(&state->rx_params_lock);
|
|
return 0;
|
|
}
|
|
|
|
static int cx23888_ir_rx_shutdown(struct v4l2_subdev *sd)
|
|
{
|
|
struct cx23888_ir_state *state = to_state(sd);
|
|
struct cx23885_dev *dev = state->dev;
|
|
|
|
mutex_lock(&state->rx_params_lock);
|
|
|
|
/* Disable or slow down all IR Rx circuits and counters */
|
|
irqenable_rx(dev, 0);
|
|
control_rx_enable(dev, false);
|
|
control_rx_demodulation_enable(dev, false);
|
|
control_rx_s_edge_detection(dev, CNTRL_EDG_NONE);
|
|
filter_rx_s_min_width(dev, 0);
|
|
cx23888_ir_write4(dev, CX23888_IR_RXCLK_REG, RXCLK_RCD);
|
|
|
|
state->rx_params.shutdown = true;
|
|
|
|
mutex_unlock(&state->rx_params_lock);
|
|
return 0;
|
|
}
|
|
|
|
static int cx23888_ir_rx_s_parameters(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_ir_parameters *p)
|
|
{
|
|
struct cx23888_ir_state *state = to_state(sd);
|
|
struct cx23885_dev *dev = state->dev;
|
|
struct v4l2_subdev_ir_parameters *o = &state->rx_params;
|
|
u16 rxclk_divider;
|
|
|
|
if (p->shutdown)
|
|
return cx23888_ir_rx_shutdown(sd);
|
|
|
|
if (p->mode != V4L2_SUBDEV_IR_MODE_PULSE_WIDTH)
|
|
return -ENOSYS;
|
|
|
|
mutex_lock(&state->rx_params_lock);
|
|
|
|
o->shutdown = p->shutdown;
|
|
|
|
o->mode = p->mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH;
|
|
|
|
o->bytes_per_data_element = p->bytes_per_data_element
|
|
= sizeof(union cx23888_ir_fifo_rec);
|
|
|
|
/* Before we tweak the hardware, we have to disable the receiver */
|
|
irqenable_rx(dev, 0);
|
|
control_rx_enable(dev, false);
|
|
|
|
control_rx_demodulation_enable(dev, p->modulation);
|
|
o->modulation = p->modulation;
|
|
|
|
if (p->modulation) {
|
|
p->carrier_freq = rxclk_rx_s_carrier(dev, p->carrier_freq,
|
|
&rxclk_divider);
|
|
|
|
o->carrier_freq = p->carrier_freq;
|
|
|
|
o->duty_cycle = p->duty_cycle = 50;
|
|
|
|
control_rx_s_carrier_window(dev, p->carrier_freq,
|
|
&p->carrier_range_lower,
|
|
&p->carrier_range_upper);
|
|
o->carrier_range_lower = p->carrier_range_lower;
|
|
o->carrier_range_upper = p->carrier_range_upper;
|
|
|
|
p->max_pulse_width =
|
|
(u32) pulse_width_count_to_ns(FIFO_RXTX, rxclk_divider);
|
|
} else {
|
|
p->max_pulse_width =
|
|
rxclk_rx_s_max_pulse_width(dev, p->max_pulse_width,
|
|
&rxclk_divider);
|
|
}
|
|
o->max_pulse_width = p->max_pulse_width;
|
|
atomic_set(&state->rxclk_divider, rxclk_divider);
|
|
|
|
p->noise_filter_min_width =
|
|
filter_rx_s_min_width(dev, p->noise_filter_min_width);
|
|
o->noise_filter_min_width = p->noise_filter_min_width;
|
|
|
|
p->resolution = clock_divider_to_resolution(rxclk_divider);
|
|
o->resolution = p->resolution;
|
|
|
|
/* FIXME - make this dependent on resolution for better performance */
|
|
control_rx_irq_watermark(dev, RX_FIFO_HALF_FULL);
|
|
|
|
control_rx_s_edge_detection(dev, CNTRL_EDG_BOTH);
|
|
|
|
o->invert_level = p->invert_level;
|
|
atomic_set(&state->rx_invert, p->invert_level);
|
|
|
|
o->interrupt_enable = p->interrupt_enable;
|
|
o->enable = p->enable;
|
|
if (p->enable) {
|
|
unsigned long flags;
|
|
|
|
spin_lock_irqsave(&state->rx_kfifo_lock, flags);
|
|
kfifo_reset(&state->rx_kfifo);
|
|
/* reset tx_fifo too if there is one... */
|
|
spin_unlock_irqrestore(&state->rx_kfifo_lock, flags);
|
|
if (p->interrupt_enable)
|
|
irqenable_rx(dev, IRQEN_RSE | IRQEN_RTE | IRQEN_ROE);
|
|
control_rx_enable(dev, p->enable);
|
|
}
|
|
|
|
mutex_unlock(&state->rx_params_lock);
|
|
return 0;
|
|
}
|
|
|
|
/* Transmitter */
|
|
static int cx23888_ir_tx_write(struct v4l2_subdev *sd, u8 *buf, size_t count,
|
|
ssize_t *num)
|
|
{
|
|
struct cx23888_ir_state *state = to_state(sd);
|
|
struct cx23885_dev *dev = state->dev;
|
|
/* For now enable the Tx FIFO Service interrupt & pretend we did work */
|
|
irqenable_tx(dev, IRQEN_TSE);
|
|
*num = count;
|
|
return 0;
|
|
}
|
|
|
|
static int cx23888_ir_tx_g_parameters(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_ir_parameters *p)
|
|
{
|
|
struct cx23888_ir_state *state = to_state(sd);
|
|
mutex_lock(&state->tx_params_lock);
|
|
memcpy(p, &state->tx_params, sizeof(struct v4l2_subdev_ir_parameters));
|
|
mutex_unlock(&state->tx_params_lock);
|
|
return 0;
|
|
}
|
|
|
|
static int cx23888_ir_tx_shutdown(struct v4l2_subdev *sd)
|
|
{
|
|
struct cx23888_ir_state *state = to_state(sd);
|
|
struct cx23885_dev *dev = state->dev;
|
|
|
|
mutex_lock(&state->tx_params_lock);
|
|
|
|
/* Disable or slow down all IR Tx circuits and counters */
|
|
irqenable_tx(dev, 0);
|
|
control_tx_enable(dev, false);
|
|
control_tx_modulation_enable(dev, false);
|
|
cx23888_ir_write4(dev, CX23888_IR_TXCLK_REG, TXCLK_TCD);
|
|
|
|
state->tx_params.shutdown = true;
|
|
|
|
mutex_unlock(&state->tx_params_lock);
|
|
return 0;
|
|
}
|
|
|
|
static int cx23888_ir_tx_s_parameters(struct v4l2_subdev *sd,
|
|
struct v4l2_subdev_ir_parameters *p)
|
|
{
|
|
struct cx23888_ir_state *state = to_state(sd);
|
|
struct cx23885_dev *dev = state->dev;
|
|
struct v4l2_subdev_ir_parameters *o = &state->tx_params;
|
|
u16 txclk_divider;
|
|
|
|
if (p->shutdown)
|
|
return cx23888_ir_tx_shutdown(sd);
|
|
|
|
if (p->mode != V4L2_SUBDEV_IR_MODE_PULSE_WIDTH)
|
|
return -ENOSYS;
|
|
|
|
mutex_lock(&state->tx_params_lock);
|
|
|
|
o->shutdown = p->shutdown;
|
|
|
|
o->mode = p->mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH;
|
|
|
|
o->bytes_per_data_element = p->bytes_per_data_element
|
|
= sizeof(union cx23888_ir_fifo_rec);
|
|
|
|
/* Before we tweak the hardware, we have to disable the transmitter */
|
|
irqenable_tx(dev, 0);
|
|
control_tx_enable(dev, false);
|
|
|
|
control_tx_modulation_enable(dev, p->modulation);
|
|
o->modulation = p->modulation;
|
|
|
|
if (p->modulation) {
|
|
p->carrier_freq = txclk_tx_s_carrier(dev, p->carrier_freq,
|
|
&txclk_divider);
|
|
o->carrier_freq = p->carrier_freq;
|
|
|
|
p->duty_cycle = cduty_tx_s_duty_cycle(dev, p->duty_cycle);
|
|
o->duty_cycle = p->duty_cycle;
|
|
|
|
p->max_pulse_width =
|
|
(u32) pulse_width_count_to_ns(FIFO_RXTX, txclk_divider);
|
|
} else {
|
|
p->max_pulse_width =
|
|
txclk_tx_s_max_pulse_width(dev, p->max_pulse_width,
|
|
&txclk_divider);
|
|
}
|
|
o->max_pulse_width = p->max_pulse_width;
|
|
atomic_set(&state->txclk_divider, txclk_divider);
|
|
|
|
p->resolution = clock_divider_to_resolution(txclk_divider);
|
|
o->resolution = p->resolution;
|
|
|
|
/* FIXME - make this dependent on resolution for better performance */
|
|
control_tx_irq_watermark(dev, TX_FIFO_HALF_EMPTY);
|
|
|
|
control_tx_polarity_invert(dev, p->invert_carrier_sense);
|
|
o->invert_carrier_sense = p->invert_carrier_sense;
|
|
|
|
control_tx_level_invert(dev, p->invert_level);
|
|
o->invert_level = p->invert_level;
|
|
|
|
o->interrupt_enable = p->interrupt_enable;
|
|
o->enable = p->enable;
|
|
if (p->enable) {
|
|
if (p->interrupt_enable)
|
|
irqenable_tx(dev, IRQEN_TSE);
|
|
control_tx_enable(dev, p->enable);
|
|
}
|
|
|
|
mutex_unlock(&state->tx_params_lock);
|
|
return 0;
|
|
}
|
|
|
|
|
|
/*
|
|
* V4L2 Subdevice Core Ops
|
|
*/
|
|
static int cx23888_ir_log_status(struct v4l2_subdev *sd)
|
|
{
|
|
struct cx23888_ir_state *state = to_state(sd);
|
|
struct cx23885_dev *dev = state->dev;
|
|
char *s;
|
|
int i, j;
|
|
|
|
u32 cntrl = cx23888_ir_read4(dev, CX23888_IR_CNTRL_REG);
|
|
u32 txclk = cx23888_ir_read4(dev, CX23888_IR_TXCLK_REG) & TXCLK_TCD;
|
|
u32 rxclk = cx23888_ir_read4(dev, CX23888_IR_RXCLK_REG) & RXCLK_RCD;
|
|
u32 cduty = cx23888_ir_read4(dev, CX23888_IR_CDUTY_REG) & CDUTY_CDC;
|
|
u32 stats = cx23888_ir_read4(dev, CX23888_IR_STATS_REG);
|
|
u32 irqen = cx23888_ir_read4(dev, CX23888_IR_IRQEN_REG);
|
|
u32 filtr = cx23888_ir_read4(dev, CX23888_IR_FILTR_REG) & FILTR_LPF;
|
|
|
|
v4l2_info(sd, "IR Receiver:\n");
|
|
v4l2_info(sd, "\tEnabled: %s\n",
|
|
cntrl & CNTRL_RXE ? "yes" : "no");
|
|
v4l2_info(sd, "\tDemodulation from a carrier: %s\n",
|
|
cntrl & CNTRL_DMD ? "enabled" : "disabled");
|
|
v4l2_info(sd, "\tFIFO: %s\n",
|
|
cntrl & CNTRL_RFE ? "enabled" : "disabled");
|
|
switch (cntrl & CNTRL_EDG) {
|
|
case CNTRL_EDG_NONE:
|
|
s = "disabled";
|
|
break;
|
|
case CNTRL_EDG_FALL:
|
|
s = "falling edge";
|
|
break;
|
|
case CNTRL_EDG_RISE:
|
|
s = "rising edge";
|
|
break;
|
|
case CNTRL_EDG_BOTH:
|
|
s = "rising & falling edges";
|
|
break;
|
|
default:
|
|
s = "??? edge";
|
|
break;
|
|
}
|
|
v4l2_info(sd, "\tPulse timers' start/stop trigger: %s\n", s);
|
|
v4l2_info(sd, "\tFIFO data on pulse timer overflow: %s\n",
|
|
cntrl & CNTRL_R ? "not loaded" : "overflow marker");
|
|
v4l2_info(sd, "\tFIFO interrupt watermark: %s\n",
|
|
cntrl & CNTRL_RIC ? "not empty" : "half full or greater");
|
|
v4l2_info(sd, "\tLoopback mode: %s\n",
|
|
cntrl & CNTRL_LBM ? "loopback active" : "normal receive");
|
|
if (cntrl & CNTRL_DMD) {
|
|
v4l2_info(sd, "\tExpected carrier (16 clocks): %u Hz\n",
|
|
clock_divider_to_carrier_freq(rxclk));
|
|
switch (cntrl & CNTRL_WIN) {
|
|
case CNTRL_WIN_3_3:
|
|
i = 3;
|
|
j = 3;
|
|
break;
|
|
case CNTRL_WIN_4_3:
|
|
i = 4;
|
|
j = 3;
|
|
break;
|
|
case CNTRL_WIN_3_4:
|
|
i = 3;
|
|
j = 4;
|
|
break;
|
|
case CNTRL_WIN_4_4:
|
|
i = 4;
|
|
j = 4;
|
|
break;
|
|
default:
|
|
i = 0;
|
|
j = 0;
|
|
break;
|
|
}
|
|
v4l2_info(sd, "\tNext carrier edge window: 16 clocks -%1d/+%1d, %u to %u Hz\n",
|
|
i, j,
|
|
clock_divider_to_freq(rxclk, 16 + j),
|
|
clock_divider_to_freq(rxclk, 16 - i));
|
|
}
|
|
v4l2_info(sd, "\tMax measurable pulse width: %u us, %llu ns\n",
|
|
pulse_width_count_to_us(FIFO_RXTX, rxclk),
|
|
pulse_width_count_to_ns(FIFO_RXTX, rxclk));
|
|
v4l2_info(sd, "\tLow pass filter: %s\n",
|
|
filtr ? "enabled" : "disabled");
|
|
if (filtr)
|
|
v4l2_info(sd, "\tMin acceptable pulse width (LPF): %u us, %u ns\n",
|
|
lpf_count_to_us(filtr),
|
|
lpf_count_to_ns(filtr));
|
|
v4l2_info(sd, "\tPulse width timer timed-out: %s\n",
|
|
stats & STATS_RTO ? "yes" : "no");
|
|
v4l2_info(sd, "\tPulse width timer time-out intr: %s\n",
|
|
irqen & IRQEN_RTE ? "enabled" : "disabled");
|
|
v4l2_info(sd, "\tFIFO overrun: %s\n",
|
|
stats & STATS_ROR ? "yes" : "no");
|
|
v4l2_info(sd, "\tFIFO overrun interrupt: %s\n",
|
|
irqen & IRQEN_ROE ? "enabled" : "disabled");
|
|
v4l2_info(sd, "\tBusy: %s\n",
|
|
stats & STATS_RBY ? "yes" : "no");
|
|
v4l2_info(sd, "\tFIFO service requested: %s\n",
|
|
stats & STATS_RSR ? "yes" : "no");
|
|
v4l2_info(sd, "\tFIFO service request interrupt: %s\n",
|
|
irqen & IRQEN_RSE ? "enabled" : "disabled");
|
|
|
|
v4l2_info(sd, "IR Transmitter:\n");
|
|
v4l2_info(sd, "\tEnabled: %s\n",
|
|
cntrl & CNTRL_TXE ? "yes" : "no");
|
|
v4l2_info(sd, "\tModulation onto a carrier: %s\n",
|
|
cntrl & CNTRL_MOD ? "enabled" : "disabled");
|
|
v4l2_info(sd, "\tFIFO: %s\n",
|
|
cntrl & CNTRL_TFE ? "enabled" : "disabled");
|
|
v4l2_info(sd, "\tFIFO interrupt watermark: %s\n",
|
|
cntrl & CNTRL_TIC ? "not empty" : "half full or less");
|
|
v4l2_info(sd, "\tOutput pin level inversion %s\n",
|
|
cntrl & CNTRL_IVO ? "yes" : "no");
|
|
v4l2_info(sd, "\tCarrier polarity: %s\n",
|
|
cntrl & CNTRL_CPL ? "space:burst mark:noburst"
|
|
: "space:noburst mark:burst");
|
|
if (cntrl & CNTRL_MOD) {
|
|
v4l2_info(sd, "\tCarrier (16 clocks): %u Hz\n",
|
|
clock_divider_to_carrier_freq(txclk));
|
|
v4l2_info(sd, "\tCarrier duty cycle: %2u/16\n",
|
|
cduty + 1);
|
|
}
|
|
v4l2_info(sd, "\tMax pulse width: %u us, %llu ns\n",
|
|
pulse_width_count_to_us(FIFO_RXTX, txclk),
|
|
pulse_width_count_to_ns(FIFO_RXTX, txclk));
|
|
v4l2_info(sd, "\tBusy: %s\n",
|
|
stats & STATS_TBY ? "yes" : "no");
|
|
v4l2_info(sd, "\tFIFO service requested: %s\n",
|
|
stats & STATS_TSR ? "yes" : "no");
|
|
v4l2_info(sd, "\tFIFO service request interrupt: %s\n",
|
|
irqen & IRQEN_TSE ? "enabled" : "disabled");
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_VIDEO_ADV_DEBUG
|
|
static int cx23888_ir_g_register(struct v4l2_subdev *sd,
|
|
struct v4l2_dbg_register *reg)
|
|
{
|
|
struct cx23888_ir_state *state = to_state(sd);
|
|
u32 addr = CX23888_IR_REG_BASE + (u32) reg->reg;
|
|
|
|
if ((addr & 0x3) != 0)
|
|
return -EINVAL;
|
|
if (addr < CX23888_IR_CNTRL_REG || addr > CX23888_IR_LEARN_REG)
|
|
return -EINVAL;
|
|
reg->size = 4;
|
|
reg->val = cx23888_ir_read4(state->dev, addr);
|
|
return 0;
|
|
}
|
|
|
|
static int cx23888_ir_s_register(struct v4l2_subdev *sd,
|
|
const struct v4l2_dbg_register *reg)
|
|
{
|
|
struct cx23888_ir_state *state = to_state(sd);
|
|
u32 addr = CX23888_IR_REG_BASE + (u32) reg->reg;
|
|
|
|
if ((addr & 0x3) != 0)
|
|
return -EINVAL;
|
|
if (addr < CX23888_IR_CNTRL_REG || addr > CX23888_IR_LEARN_REG)
|
|
return -EINVAL;
|
|
cx23888_ir_write4(state->dev, addr, reg->val);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static const struct v4l2_subdev_core_ops cx23888_ir_core_ops = {
|
|
.log_status = cx23888_ir_log_status,
|
|
#ifdef CONFIG_VIDEO_ADV_DEBUG
|
|
.g_register = cx23888_ir_g_register,
|
|
.s_register = cx23888_ir_s_register,
|
|
#endif
|
|
.interrupt_service_routine = cx23888_ir_irq_handler,
|
|
};
|
|
|
|
static const struct v4l2_subdev_ir_ops cx23888_ir_ir_ops = {
|
|
.rx_read = cx23888_ir_rx_read,
|
|
.rx_g_parameters = cx23888_ir_rx_g_parameters,
|
|
.rx_s_parameters = cx23888_ir_rx_s_parameters,
|
|
|
|
.tx_write = cx23888_ir_tx_write,
|
|
.tx_g_parameters = cx23888_ir_tx_g_parameters,
|
|
.tx_s_parameters = cx23888_ir_tx_s_parameters,
|
|
};
|
|
|
|
static const struct v4l2_subdev_ops cx23888_ir_controller_ops = {
|
|
.core = &cx23888_ir_core_ops,
|
|
.ir = &cx23888_ir_ir_ops,
|
|
};
|
|
|
|
static const struct v4l2_subdev_ir_parameters default_rx_params = {
|
|
.bytes_per_data_element = sizeof(union cx23888_ir_fifo_rec),
|
|
.mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH,
|
|
|
|
.enable = false,
|
|
.interrupt_enable = false,
|
|
.shutdown = true,
|
|
|
|
.modulation = true,
|
|
.carrier_freq = 36000, /* 36 kHz - RC-5, RC-6, and RC-6A carrier */
|
|
|
|
/* RC-5: 666,667 ns = 1/36 kHz * 32 cycles * 1 mark * 0.75 */
|
|
/* RC-6A: 333,333 ns = 1/36 kHz * 16 cycles * 1 mark * 0.75 */
|
|
.noise_filter_min_width = 333333, /* ns */
|
|
.carrier_range_lower = 35000,
|
|
.carrier_range_upper = 37000,
|
|
.invert_level = false,
|
|
};
|
|
|
|
static const struct v4l2_subdev_ir_parameters default_tx_params = {
|
|
.bytes_per_data_element = sizeof(union cx23888_ir_fifo_rec),
|
|
.mode = V4L2_SUBDEV_IR_MODE_PULSE_WIDTH,
|
|
|
|
.enable = false,
|
|
.interrupt_enable = false,
|
|
.shutdown = true,
|
|
|
|
.modulation = true,
|
|
.carrier_freq = 36000, /* 36 kHz - RC-5 carrier */
|
|
.duty_cycle = 25, /* 25 % - RC-5 carrier */
|
|
.invert_level = false,
|
|
.invert_carrier_sense = false,
|
|
};
|
|
|
|
int cx23888_ir_probe(struct cx23885_dev *dev)
|
|
{
|
|
struct cx23888_ir_state *state;
|
|
struct v4l2_subdev *sd;
|
|
struct v4l2_subdev_ir_parameters default_params;
|
|
int ret;
|
|
|
|
state = kzalloc(sizeof(struct cx23888_ir_state), GFP_KERNEL);
|
|
if (state == NULL)
|
|
return -ENOMEM;
|
|
|
|
spin_lock_init(&state->rx_kfifo_lock);
|
|
if (kfifo_alloc(&state->rx_kfifo, CX23888_IR_RX_KFIFO_SIZE, GFP_KERNEL))
|
|
return -ENOMEM;
|
|
|
|
state->dev = dev;
|
|
sd = &state->sd;
|
|
|
|
v4l2_subdev_init(sd, &cx23888_ir_controller_ops);
|
|
v4l2_set_subdevdata(sd, state);
|
|
/* FIXME - fix the formatting of dev->v4l2_dev.name and use it */
|
|
snprintf(sd->name, sizeof(sd->name), "%s/888-ir", dev->name);
|
|
sd->grp_id = CX23885_HW_888_IR;
|
|
|
|
ret = v4l2_device_register_subdev(&dev->v4l2_dev, sd);
|
|
if (ret == 0) {
|
|
/*
|
|
* Ensure no interrupts arrive from '888 specific conditions,
|
|
* since we ignore them in this driver to have commonality with
|
|
* similar IR controller cores.
|
|
*/
|
|
cx23888_ir_write4(dev, CX23888_IR_IRQEN_REG, 0);
|
|
|
|
mutex_init(&state->rx_params_lock);
|
|
default_params = default_rx_params;
|
|
v4l2_subdev_call(sd, ir, rx_s_parameters, &default_params);
|
|
|
|
mutex_init(&state->tx_params_lock);
|
|
default_params = default_tx_params;
|
|
v4l2_subdev_call(sd, ir, tx_s_parameters, &default_params);
|
|
} else {
|
|
kfifo_free(&state->rx_kfifo);
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
int cx23888_ir_remove(struct cx23885_dev *dev)
|
|
{
|
|
struct v4l2_subdev *sd;
|
|
struct cx23888_ir_state *state;
|
|
|
|
sd = cx23885_find_hw(dev, CX23885_HW_888_IR);
|
|
if (sd == NULL)
|
|
return -ENODEV;
|
|
|
|
cx23888_ir_rx_shutdown(sd);
|
|
cx23888_ir_tx_shutdown(sd);
|
|
|
|
state = to_state(sd);
|
|
v4l2_device_unregister_subdev(sd);
|
|
kfifo_free(&state->rx_kfifo);
|
|
kfree(state);
|
|
/* Nothing more to free() as state held the actual v4l2_subdev object */
|
|
return 0;
|
|
}
|