490 lines
12 KiB
C
490 lines
12 KiB
C
// SPDX-License-Identifier: GPL-2.0-or-later
|
|
/*
|
|
* OMAP7xx SPI 100k controller driver
|
|
* Author: Fabrice Crohas <fcrohas@gmail.com>
|
|
* from original omap1_mcspi driver
|
|
*
|
|
* Copyright (C) 2005, 2006 Nokia Corporation
|
|
* Author: Samuel Ortiz <samuel.ortiz@nokia.com> and
|
|
* Juha Yrjola <juha.yrjola@nokia.com>
|
|
*/
|
|
#include <linux/kernel.h>
|
|
#include <linux/init.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/module.h>
|
|
#include <linux/device.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/pm_runtime.h>
|
|
#include <linux/err.h>
|
|
#include <linux/clk.h>
|
|
#include <linux/io.h>
|
|
#include <linux/slab.h>
|
|
|
|
#include <linux/spi/spi.h>
|
|
|
|
#define OMAP1_SPI100K_MAX_FREQ 48000000
|
|
|
|
#define ICR_SPITAS (OMAP7XX_ICR_BASE + 0x12)
|
|
|
|
#define SPI_SETUP1 0x00
|
|
#define SPI_SETUP2 0x02
|
|
#define SPI_CTRL 0x04
|
|
#define SPI_STATUS 0x06
|
|
#define SPI_TX_LSB 0x08
|
|
#define SPI_TX_MSB 0x0a
|
|
#define SPI_RX_LSB 0x0c
|
|
#define SPI_RX_MSB 0x0e
|
|
|
|
#define SPI_SETUP1_INT_READ_ENABLE (1UL << 5)
|
|
#define SPI_SETUP1_INT_WRITE_ENABLE (1UL << 4)
|
|
#define SPI_SETUP1_CLOCK_DIVISOR(x) ((x) << 1)
|
|
#define SPI_SETUP1_CLOCK_ENABLE (1UL << 0)
|
|
|
|
#define SPI_SETUP2_ACTIVE_EDGE_FALLING (0UL << 0)
|
|
#define SPI_SETUP2_ACTIVE_EDGE_RISING (1UL << 0)
|
|
#define SPI_SETUP2_NEGATIVE_LEVEL (0UL << 5)
|
|
#define SPI_SETUP2_POSITIVE_LEVEL (1UL << 5)
|
|
#define SPI_SETUP2_LEVEL_TRIGGER (0UL << 10)
|
|
#define SPI_SETUP2_EDGE_TRIGGER (1UL << 10)
|
|
|
|
#define SPI_CTRL_SEN(x) ((x) << 7)
|
|
#define SPI_CTRL_WORD_SIZE(x) (((x) - 1) << 2)
|
|
#define SPI_CTRL_WR (1UL << 1)
|
|
#define SPI_CTRL_RD (1UL << 0)
|
|
|
|
#define SPI_STATUS_WE (1UL << 1)
|
|
#define SPI_STATUS_RD (1UL << 0)
|
|
|
|
/* use PIO for small transfers, avoiding DMA setup/teardown overhead and
|
|
* cache operations; better heuristics consider wordsize and bitrate.
|
|
*/
|
|
#define DMA_MIN_BYTES 8
|
|
|
|
#define SPI_RUNNING 0
|
|
#define SPI_SHUTDOWN 1
|
|
|
|
struct omap1_spi100k {
|
|
struct clk *ick;
|
|
struct clk *fck;
|
|
|
|
/* Virtual base address of the controller */
|
|
void __iomem *base;
|
|
};
|
|
|
|
struct omap1_spi100k_cs {
|
|
void __iomem *base;
|
|
int word_len;
|
|
};
|
|
|
|
static void spi100k_enable_clock(struct spi_master *master)
|
|
{
|
|
unsigned int val;
|
|
struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
|
|
|
|
/* enable SPI */
|
|
val = readw(spi100k->base + SPI_SETUP1);
|
|
val |= SPI_SETUP1_CLOCK_ENABLE;
|
|
writew(val, spi100k->base + SPI_SETUP1);
|
|
}
|
|
|
|
static void spi100k_disable_clock(struct spi_master *master)
|
|
{
|
|
unsigned int val;
|
|
struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
|
|
|
|
/* disable SPI */
|
|
val = readw(spi100k->base + SPI_SETUP1);
|
|
val &= ~SPI_SETUP1_CLOCK_ENABLE;
|
|
writew(val, spi100k->base + SPI_SETUP1);
|
|
}
|
|
|
|
static void spi100k_write_data(struct spi_master *master, int len, int data)
|
|
{
|
|
struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
|
|
|
|
/* write 16-bit word, shifting 8-bit data if necessary */
|
|
if (len <= 8) {
|
|
data <<= 8;
|
|
len = 16;
|
|
}
|
|
|
|
spi100k_enable_clock(master);
|
|
writew(data, spi100k->base + SPI_TX_MSB);
|
|
|
|
writew(SPI_CTRL_SEN(0) |
|
|
SPI_CTRL_WORD_SIZE(len) |
|
|
SPI_CTRL_WR,
|
|
spi100k->base + SPI_CTRL);
|
|
|
|
/* Wait for bit ack send change */
|
|
while ((readw(spi100k->base + SPI_STATUS) & SPI_STATUS_WE) != SPI_STATUS_WE)
|
|
;
|
|
udelay(1000);
|
|
|
|
spi100k_disable_clock(master);
|
|
}
|
|
|
|
static int spi100k_read_data(struct spi_master *master, int len)
|
|
{
|
|
int dataL;
|
|
struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
|
|
|
|
/* Always do at least 16 bits */
|
|
if (len <= 8)
|
|
len = 16;
|
|
|
|
spi100k_enable_clock(master);
|
|
writew(SPI_CTRL_SEN(0) |
|
|
SPI_CTRL_WORD_SIZE(len) |
|
|
SPI_CTRL_RD,
|
|
spi100k->base + SPI_CTRL);
|
|
|
|
while ((readw(spi100k->base + SPI_STATUS) & SPI_STATUS_RD) != SPI_STATUS_RD)
|
|
;
|
|
udelay(1000);
|
|
|
|
dataL = readw(spi100k->base + SPI_RX_LSB);
|
|
readw(spi100k->base + SPI_RX_MSB);
|
|
spi100k_disable_clock(master);
|
|
|
|
return dataL;
|
|
}
|
|
|
|
static void spi100k_open(struct spi_master *master)
|
|
{
|
|
/* get control of SPI */
|
|
struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
|
|
|
|
writew(SPI_SETUP1_INT_READ_ENABLE |
|
|
SPI_SETUP1_INT_WRITE_ENABLE |
|
|
SPI_SETUP1_CLOCK_DIVISOR(0), spi100k->base + SPI_SETUP1);
|
|
|
|
/* configure clock and interrupts */
|
|
writew(SPI_SETUP2_ACTIVE_EDGE_FALLING |
|
|
SPI_SETUP2_NEGATIVE_LEVEL |
|
|
SPI_SETUP2_LEVEL_TRIGGER, spi100k->base + SPI_SETUP2);
|
|
}
|
|
|
|
static void omap1_spi100k_force_cs(struct omap1_spi100k *spi100k, int enable)
|
|
{
|
|
if (enable)
|
|
writew(0x05fc, spi100k->base + SPI_CTRL);
|
|
else
|
|
writew(0x05fd, spi100k->base + SPI_CTRL);
|
|
}
|
|
|
|
static unsigned
|
|
omap1_spi100k_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer)
|
|
{
|
|
struct omap1_spi100k_cs *cs = spi->controller_state;
|
|
unsigned int count, c;
|
|
int word_len;
|
|
|
|
count = xfer->len;
|
|
c = count;
|
|
word_len = cs->word_len;
|
|
|
|
if (word_len <= 8) {
|
|
u8 *rx;
|
|
const u8 *tx;
|
|
|
|
rx = xfer->rx_buf;
|
|
tx = xfer->tx_buf;
|
|
do {
|
|
c -= 1;
|
|
if (xfer->tx_buf != NULL)
|
|
spi100k_write_data(spi->master, word_len, *tx++);
|
|
if (xfer->rx_buf != NULL)
|
|
*rx++ = spi100k_read_data(spi->master, word_len);
|
|
} while (c);
|
|
} else if (word_len <= 16) {
|
|
u16 *rx;
|
|
const u16 *tx;
|
|
|
|
rx = xfer->rx_buf;
|
|
tx = xfer->tx_buf;
|
|
do {
|
|
c -= 2;
|
|
if (xfer->tx_buf != NULL)
|
|
spi100k_write_data(spi->master, word_len, *tx++);
|
|
if (xfer->rx_buf != NULL)
|
|
*rx++ = spi100k_read_data(spi->master, word_len);
|
|
} while (c);
|
|
} else if (word_len <= 32) {
|
|
u32 *rx;
|
|
const u32 *tx;
|
|
|
|
rx = xfer->rx_buf;
|
|
tx = xfer->tx_buf;
|
|
do {
|
|
c -= 4;
|
|
if (xfer->tx_buf != NULL)
|
|
spi100k_write_data(spi->master, word_len, *tx);
|
|
if (xfer->rx_buf != NULL)
|
|
*rx = spi100k_read_data(spi->master, word_len);
|
|
} while (c);
|
|
}
|
|
return count - c;
|
|
}
|
|
|
|
/* called only when no transfer is active to this device */
|
|
static int omap1_spi100k_setup_transfer(struct spi_device *spi,
|
|
struct spi_transfer *t)
|
|
{
|
|
struct omap1_spi100k *spi100k = spi_master_get_devdata(spi->master);
|
|
struct omap1_spi100k_cs *cs = spi->controller_state;
|
|
u8 word_len;
|
|
|
|
if (t != NULL)
|
|
word_len = t->bits_per_word;
|
|
else
|
|
word_len = spi->bits_per_word;
|
|
|
|
if (word_len > 32)
|
|
return -EINVAL;
|
|
cs->word_len = word_len;
|
|
|
|
/* SPI init before transfer */
|
|
writew(0x3e, spi100k->base + SPI_SETUP1);
|
|
writew(0x00, spi100k->base + SPI_STATUS);
|
|
writew(0x3e, spi100k->base + SPI_CTRL);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* the spi->mode bits understood by this driver: */
|
|
#define MODEBITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH)
|
|
|
|
static int omap1_spi100k_setup(struct spi_device *spi)
|
|
{
|
|
int ret;
|
|
struct omap1_spi100k *spi100k;
|
|
struct omap1_spi100k_cs *cs = spi->controller_state;
|
|
|
|
spi100k = spi_master_get_devdata(spi->master);
|
|
|
|
if (!cs) {
|
|
cs = devm_kzalloc(&spi->dev, sizeof(*cs), GFP_KERNEL);
|
|
if (!cs)
|
|
return -ENOMEM;
|
|
cs->base = spi100k->base + spi->chip_select * 0x14;
|
|
spi->controller_state = cs;
|
|
}
|
|
|
|
spi100k_open(spi->master);
|
|
|
|
clk_prepare_enable(spi100k->ick);
|
|
clk_prepare_enable(spi100k->fck);
|
|
|
|
ret = omap1_spi100k_setup_transfer(spi, NULL);
|
|
|
|
clk_disable_unprepare(spi100k->ick);
|
|
clk_disable_unprepare(spi100k->fck);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int omap1_spi100k_transfer_one_message(struct spi_master *master,
|
|
struct spi_message *m)
|
|
{
|
|
struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
|
|
struct spi_device *spi = m->spi;
|
|
struct spi_transfer *t = NULL;
|
|
int cs_active = 0;
|
|
int status = 0;
|
|
|
|
list_for_each_entry(t, &m->transfers, transfer_list) {
|
|
if (t->tx_buf == NULL && t->rx_buf == NULL && t->len) {
|
|
break;
|
|
}
|
|
status = omap1_spi100k_setup_transfer(spi, t);
|
|
if (status < 0)
|
|
break;
|
|
|
|
if (!cs_active) {
|
|
omap1_spi100k_force_cs(spi100k, 1);
|
|
cs_active = 1;
|
|
}
|
|
|
|
if (t->len) {
|
|
unsigned count;
|
|
|
|
count = omap1_spi100k_txrx_pio(spi, t);
|
|
m->actual_length += count;
|
|
|
|
if (count != t->len) {
|
|
break;
|
|
}
|
|
}
|
|
|
|
spi_transfer_delay_exec(t);
|
|
|
|
/* ignore the "leave it on after last xfer" hint */
|
|
|
|
if (t->cs_change) {
|
|
omap1_spi100k_force_cs(spi100k, 0);
|
|
cs_active = 0;
|
|
}
|
|
}
|
|
|
|
status = omap1_spi100k_setup_transfer(spi, NULL);
|
|
|
|
if (cs_active)
|
|
omap1_spi100k_force_cs(spi100k, 0);
|
|
|
|
m->status = status;
|
|
|
|
spi_finalize_current_message(master);
|
|
|
|
return status;
|
|
}
|
|
|
|
static int omap1_spi100k_probe(struct platform_device *pdev)
|
|
{
|
|
struct spi_master *master;
|
|
struct omap1_spi100k *spi100k;
|
|
int status = 0;
|
|
|
|
if (!pdev->id)
|
|
return -EINVAL;
|
|
|
|
master = spi_alloc_master(&pdev->dev, sizeof(*spi100k));
|
|
if (master == NULL) {
|
|
dev_dbg(&pdev->dev, "master allocation failed\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
if (pdev->id != -1)
|
|
master->bus_num = pdev->id;
|
|
|
|
master->setup = omap1_spi100k_setup;
|
|
master->transfer_one_message = omap1_spi100k_transfer_one_message;
|
|
master->num_chipselect = 2;
|
|
master->mode_bits = MODEBITS;
|
|
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32);
|
|
master->min_speed_hz = OMAP1_SPI100K_MAX_FREQ/(1<<16);
|
|
master->max_speed_hz = OMAP1_SPI100K_MAX_FREQ;
|
|
master->auto_runtime_pm = true;
|
|
|
|
spi100k = spi_master_get_devdata(master);
|
|
|
|
/*
|
|
* The memory region base address is taken as the platform_data.
|
|
* You should allocate this with ioremap() before initializing
|
|
* the SPI.
|
|
*/
|
|
spi100k->base = (void __iomem *)dev_get_platdata(&pdev->dev);
|
|
|
|
spi100k->ick = devm_clk_get(&pdev->dev, "ick");
|
|
if (IS_ERR(spi100k->ick)) {
|
|
dev_dbg(&pdev->dev, "can't get spi100k_ick\n");
|
|
status = PTR_ERR(spi100k->ick);
|
|
goto err;
|
|
}
|
|
|
|
spi100k->fck = devm_clk_get(&pdev->dev, "fck");
|
|
if (IS_ERR(spi100k->fck)) {
|
|
dev_dbg(&pdev->dev, "can't get spi100k_fck\n");
|
|
status = PTR_ERR(spi100k->fck);
|
|
goto err;
|
|
}
|
|
|
|
status = clk_prepare_enable(spi100k->ick);
|
|
if (status != 0) {
|
|
dev_err(&pdev->dev, "failed to enable ick: %d\n", status);
|
|
goto err;
|
|
}
|
|
|
|
status = clk_prepare_enable(spi100k->fck);
|
|
if (status != 0) {
|
|
dev_err(&pdev->dev, "failed to enable fck: %d\n", status);
|
|
goto err_ick;
|
|
}
|
|
|
|
pm_runtime_enable(&pdev->dev);
|
|
pm_runtime_set_active(&pdev->dev);
|
|
|
|
status = devm_spi_register_master(&pdev->dev, master);
|
|
if (status < 0)
|
|
goto err_fck;
|
|
|
|
return status;
|
|
|
|
err_fck:
|
|
clk_disable_unprepare(spi100k->fck);
|
|
err_ick:
|
|
clk_disable_unprepare(spi100k->ick);
|
|
err:
|
|
spi_master_put(master);
|
|
return status;
|
|
}
|
|
|
|
static int omap1_spi100k_remove(struct platform_device *pdev)
|
|
{
|
|
struct spi_master *master = platform_get_drvdata(pdev);
|
|
struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
|
|
|
|
pm_runtime_disable(&pdev->dev);
|
|
|
|
clk_disable_unprepare(spi100k->fck);
|
|
clk_disable_unprepare(spi100k->ick);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int omap1_spi100k_runtime_suspend(struct device *dev)
|
|
{
|
|
struct spi_master *master = dev_get_drvdata(dev);
|
|
struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
|
|
|
|
clk_disable_unprepare(spi100k->ick);
|
|
clk_disable_unprepare(spi100k->fck);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int omap1_spi100k_runtime_resume(struct device *dev)
|
|
{
|
|
struct spi_master *master = dev_get_drvdata(dev);
|
|
struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
|
|
int ret;
|
|
|
|
ret = clk_prepare_enable(spi100k->ick);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to enable ick: %d\n", ret);
|
|
return ret;
|
|
}
|
|
|
|
ret = clk_prepare_enable(spi100k->fck);
|
|
if (ret != 0) {
|
|
dev_err(dev, "Failed to enable fck: %d\n", ret);
|
|
clk_disable_unprepare(spi100k->ick);
|
|
return ret;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static const struct dev_pm_ops omap1_spi100k_pm = {
|
|
SET_RUNTIME_PM_OPS(omap1_spi100k_runtime_suspend,
|
|
omap1_spi100k_runtime_resume, NULL)
|
|
};
|
|
|
|
static struct platform_driver omap1_spi100k_driver = {
|
|
.driver = {
|
|
.name = "omap1_spi100k",
|
|
.pm = &omap1_spi100k_pm,
|
|
},
|
|
.probe = omap1_spi100k_probe,
|
|
.remove = omap1_spi100k_remove,
|
|
};
|
|
|
|
module_platform_driver(omap1_spi100k_driver);
|
|
|
|
MODULE_DESCRIPTION("OMAP7xx SPI 100k controller driver");
|
|
MODULE_AUTHOR("Fabrice Crohas <fcrohas@gmail.com>");
|
|
MODULE_LICENSE("GPL");
|