linux-sg2042/arch/powerpc/sysdev/mv64x60_pci.c

172 lines
4.2 KiB
C

/*
* PCI bus setup for Marvell mv64360/mv64460 host bridges (Discovery)
*
* Author: Dale Farnsworth <dale@farnsworth.org>
*
* 2007 (c) MontaVista, Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
*/
#include <linux/stddef.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/pci.h>
#include <asm/prom.h>
#include <asm/pci-bridge.h>
#define PCI_HEADER_TYPE_INVALID 0x7f /* Invalid PCI header type */
#ifdef CONFIG_SYSFS
/* 32-bit hex or dec stringified number + '\n' */
#define MV64X60_VAL_LEN_MAX 11
#define MV64X60_PCICFG_CPCI_HOTSWAP 0x68
static ssize_t mv64x60_hs_reg_read(struct kobject *kobj,
struct bin_attribute *attr, char *buf,
loff_t off, size_t count)
{
struct pci_dev *phb;
u32 v;
if (off > 0)
return 0;
if (count < MV64X60_VAL_LEN_MAX)
return -EINVAL;
phb = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0));
if (!phb)
return -ENODEV;
pci_read_config_dword(phb, MV64X60_PCICFG_CPCI_HOTSWAP, &v);
pci_dev_put(phb);
return sprintf(buf, "0x%08x\n", v);
}
static ssize_t mv64x60_hs_reg_write(struct kobject *kobj,
struct bin_attribute *attr, char *buf,
loff_t off, size_t count)
{
struct pci_dev *phb;
u32 v;
if (off > 0)
return 0;
if (count <= 0)
return -EINVAL;
if (sscanf(buf, "%i", &v) != 1)
return -EINVAL;
phb = pci_get_bus_and_slot(0, PCI_DEVFN(0, 0));
if (!phb)
return -ENODEV;
pci_write_config_dword(phb, MV64X60_PCICFG_CPCI_HOTSWAP, v);
pci_dev_put(phb);
return count;
}
static struct bin_attribute mv64x60_hs_reg_attr = { /* Hotswap register */
.attr = {
.name = "hs_reg",
.mode = S_IRUGO | S_IWUSR,
.owner = THIS_MODULE,
},
.size = MV64X60_VAL_LEN_MAX,
.read = mv64x60_hs_reg_read,
.write = mv64x60_hs_reg_write,
};
static int __init mv64x60_sysfs_init(void)
{
struct device_node *np;
struct platform_device *pdev;
const unsigned int *prop;
np = of_find_compatible_node(NULL, NULL, "marvell,mv64360");
if (!np)
return 0;
prop = of_get_property(np, "hs_reg_valid", NULL);
of_node_put(np);
pdev = platform_device_register_simple("marvell,mv64360", 0, NULL, 0);
if (IS_ERR(pdev))
return PTR_ERR(pdev);
return sysfs_create_bin_file(&pdev->dev.kobj, &mv64x60_hs_reg_attr);
}
subsys_initcall(mv64x60_sysfs_init);
#endif /* CONFIG_SYSFS */
static void __init mv64x60_pci_fixup_early(struct pci_dev *dev)
{
/*
* Set the host bridge hdr_type to an invalid value so that
* pci_setup_device() will ignore the host bridge.
*/
dev->hdr_type = PCI_HEADER_TYPE_INVALID;
}
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_MV64360,
mv64x60_pci_fixup_early);
DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_MARVELL, PCI_DEVICE_ID_MARVELL_MV64460,
mv64x60_pci_fixup_early);
static int __init mv64x60_add_bridge(struct device_node *dev)
{
int len;
struct pci_controller *hose;
struct resource rsrc;
const int *bus_range;
int primary;
memset(&rsrc, 0, sizeof(rsrc));
/* Fetch host bridge registers address */
if (of_address_to_resource(dev, 0, &rsrc)) {
printk(KERN_ERR "No PCI reg property in device tree\n");
return -ENODEV;
}
/* Get bus range if any */
bus_range = of_get_property(dev, "bus-range", &len);
if (bus_range == NULL || len < 2 * sizeof(int))
printk(KERN_WARNING "Can't get bus-range for %s, assume"
" bus 0\n", dev->full_name);
hose = pcibios_alloc_controller(dev);
if (!hose)
return -ENOMEM;
hose->first_busno = bus_range ? bus_range[0] : 0;
hose->last_busno = bus_range ? bus_range[1] : 0xff;
setup_indirect_pci(hose, rsrc.start, rsrc.start + 4, 0);
hose->self_busno = hose->first_busno;
printk(KERN_INFO "Found MV64x60 PCI host bridge at 0x%016llx. "
"Firmware bus number: %d->%d\n",
(unsigned long long)rsrc.start, hose->first_busno,
hose->last_busno);
/* Interpret the "ranges" property */
/* This also maps the I/O region and sets isa_io/mem_base */
primary = (hose->first_busno == 0);
pci_process_bridge_OF_ranges(hose, dev, primary);
return 0;
}
void __init mv64x60_pci_init(void)
{
struct device_node *np;
for_each_compatible_node(np, "pci", "marvell,mv64360-pci")
mv64x60_add_bridge(np);
}