Fabrice Gasnier 50dbe1f4b4 iio: adc: stm32: fix common clock rate ... ADC clock input is provided to internal prescaler (that decreases its frequency). It's then used as reference clock for conversions. - Fix common clock rate used then by stm32-adc sub-devices. Take common prescaler into account. Currently, rate is used to set "boost" mode. It may unnecessarily be set. This impacts power consumption. - Fix ADC max clock rate on STM32H7 (fADC from datasheet). Currently, prescaler may be set too low. This can result in ADC reference clock used for conversion to exceed max allowed clock frequency. Fixes: 95e339b6e8 ("iio: adc: stm32: add support for STM32H7") Signed-off-by: Fabrice Gasnier <fabrice.gasnier@st.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>		2017-07-30 17:18:38 +01:00
..
accel	First set of IIO fixes for the 4.13 cycle.	2017-07-23 20:54:31 -07:00
adc	iio: adc: stm32: fix common clock rate	2017-07-30 17:18:38 +01:00
amplifiers	…
buffer	iio: buffer-dmaengine: Add missing header buffer_impl.h	2017-06-13 20:56:05 +01:00
chemical	drivers: iio: chemical: replace comma with a semicolon	2017-03-30 19:13:23 +01:00
common	First set of IIO fixes for the 4.13 cycle.	2017-07-23 20:54:31 -07:00
counter	iio: pc104: Mask PC/104 drivers via the PC104 Kconfig option	2017-03-15 21:59:08 +00:00
dac	First set of new device support, features and cleanups for IIO in the 4.13 cycle	2017-05-29 15:53:42 +02:00
dummy	iio:dummy: Stop enabling timestamp by default.	2017-01-10 19:54:55 +00:00
frequency	…
gyro	Fourth set of IIO new device support, features and cleanups for the 4.12 cycle	2017-04-18 17:13:31 +02:00
health	First set of IIO new device support, features and cleanup for the 4.12 cycle.	2017-03-06 13:17:21 +01:00
humidity	iio: humidity: hts221: add power management support	2017-05-14 16:52:33 +01:00
imu	Second set of IIO new device support, features and cleanups for the 4.13 cycle.	2017-06-26 07:09:23 +02:00
light	First set of IIO fixes for the 4.13 cycle.	2017-07-23 20:54:31 -07:00
magnetometer	iio: magnetometer: st_magn_spi: fix spi_device_id table	2017-06-11 15:07:40 +01:00
multiplexer	iio: multiplexer: new iio category and iio-mux driver	2017-06-03 19:29:26 +09:00
orientation	iio: hid-sensor-rotation: Add "scale" and "offset" properties parse support	2017-05-07 12:22:36 +01:00
potentiometer	iio: max5481: Add support for Maxim digital potentiometers	2017-01-28 12:13:31 +00:00
potentiostat	iio: lmp91000: Set parent device	2017-02-19 12:01:52 +00:00
pressure	iio: bmp280: properly initialize device for humidity reading	2017-07-30 14:41:12 +01:00
proximity	Second set of IIO new device support, features and cleanups for the 4.13 cycle.	2017-06-26 07:09:23 +02:00
temperature	iio: temperature: maxim_thermocouple: add MAX31856 part	2017-05-07 12:36:41 +01:00
trigger	iio: trigger: stm32-timer: add enable attribute	2017-07-30 14:48:14 +01:00
Kconfig	iio: multiplexer: new iio category and iio-mux driver	2017-06-03 19:29:26 +09:00
Makefile	iio: multiplexer: new iio category and iio-mux driver	2017-06-03 19:29:26 +09:00
iio_core.h	iio:core: timestamping clock selection support	2016-06-30 19:41:38 +01:00
iio_core_trigger.h	…
industrialio-buffer.c	sched/headers: Prepare to move signal wakeup & sigpending methods from <linux/sched.h> into <linux/sched/signal.h>	2017-03-02 08:42:32 +01:00
industrialio-configfs.c	…
industrialio-core.c	iio: add hardware triggered operating mode	2017-06-11 15:58:41 +01:00
industrialio-event.c	iio: iio_push_event(): Don't crash if the event interface is not registered	2016-09-10 16:40:44 +01:00
industrialio-sw-device.c	…
industrialio-sw-trigger.c	…
industrialio-trigger.c	iio: trigger: fix NULL pointer dereference in iio_trigger_write_current()	2017-05-21 12:36:59 +01:00
industrialio-triggered-event.c	…
inkern.c	Char/Misc patches for 4.13-rc1	2017-07-03 20:55:59 -07:00