linux-sg2042/drivers/eisa/eisa-bus.c

431 lines
9.9 KiB
C

/*
* EISA bus support functions for sysfs.
*
* (C) 2002, 2003 Marc Zyngier <maz@wild-wind.fr.eu.org>
*
* This code is released under the GPL version 2.
*/
#include <linux/kernel.h>
#include <linux/device.h>
#include <linux/eisa.h>
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/ioport.h>
#include <asm/io.h>
#define SLOT_ADDRESS(r,n) (r->bus_base_addr + (0x1000 * n))
#define EISA_DEVINFO(i,s) { .id = { .sig = i }, .name = s }
struct eisa_device_info {
struct eisa_device_id id;
char name[DEVICE_NAME_SIZE];
};
#ifdef CONFIG_EISA_NAMES
static struct eisa_device_info __initdata eisa_table[] = {
#include "devlist.h"
};
#define EISA_INFOS (sizeof (eisa_table) / (sizeof (struct eisa_device_info)))
#endif
#define EISA_MAX_FORCED_DEV 16
static int enable_dev[EISA_MAX_FORCED_DEV];
static int enable_dev_count;
static int disable_dev[EISA_MAX_FORCED_DEV];
static int disable_dev_count;
static int is_forced_dev (int *forced_tab,
int forced_count,
struct eisa_root_device *root,
struct eisa_device *edev)
{
int i, x;
for (i = 0; i < forced_count; i++) {
x = (root->bus_nr << 8) | edev->slot;
if (forced_tab[i] == x)
return 1;
}
return 0;
}
static void __init eisa_name_device (struct eisa_device *edev)
{
#ifdef CONFIG_EISA_NAMES
int i;
for (i = 0; i < EISA_INFOS; i++) {
if (!strcmp (edev->id.sig, eisa_table[i].id.sig)) {
strlcpy (edev->pretty_name,
eisa_table[i].name,
DEVICE_NAME_SIZE);
return;
}
}
/* No name was found */
sprintf (edev->pretty_name, "EISA device %.7s", edev->id.sig);
#endif
}
static char __init *decode_eisa_sig(unsigned long addr)
{
static char sig_str[EISA_SIG_LEN];
u8 sig[4];
u16 rev;
int i;
for (i = 0; i < 4; i++) {
#ifdef CONFIG_EISA_VLB_PRIMING
/*
* This ugly stuff is used to wake up VL-bus cards
* (AHA-284x is the only known example), so we can
* read the EISA id.
*
* Thankfully, this only exists on x86...
*/
outb(0x80 + i, addr);
#endif
sig[i] = inb (addr + i);
if (!i && (sig[0] & 0x80))
return NULL;
}
sig_str[0] = ((sig[0] >> 2) & 0x1f) + ('A' - 1);
sig_str[1] = (((sig[0] & 3) << 3) | (sig[1] >> 5)) + ('A' - 1);
sig_str[2] = (sig[1] & 0x1f) + ('A' - 1);
rev = (sig[2] << 8) | sig[3];
sprintf(sig_str + 3, "%04X", rev);
return sig_str;
}
static int eisa_bus_match (struct device *dev, struct device_driver *drv)
{
struct eisa_device *edev = to_eisa_device (dev);
struct eisa_driver *edrv = to_eisa_driver (drv);
const struct eisa_device_id *eids = edrv->id_table;
if (!eids)
return 0;
while (strlen (eids->sig)) {
if (!strcmp (eids->sig, edev->id.sig) &&
edev->state & EISA_CONFIG_ENABLED) {
edev->id.driver_data = eids->driver_data;
return 1;
}
eids++;
}
return 0;
}
struct bus_type eisa_bus_type = {
.name = "eisa",
.match = eisa_bus_match,
};
int eisa_driver_register (struct eisa_driver *edrv)
{
int r;
edrv->driver.bus = &eisa_bus_type;
if ((r = driver_register (&edrv->driver)) < 0)
return r;
return 0;
}
void eisa_driver_unregister (struct eisa_driver *edrv)
{
driver_unregister (&edrv->driver);
}
static ssize_t eisa_show_sig (struct device *dev, struct device_attribute *attr, char *buf)
{
struct eisa_device *edev = to_eisa_device (dev);
return sprintf (buf,"%s\n", edev->id.sig);
}
static DEVICE_ATTR(signature, S_IRUGO, eisa_show_sig, NULL);
static ssize_t eisa_show_state (struct device *dev, struct device_attribute *attr, char *buf)
{
struct eisa_device *edev = to_eisa_device (dev);
return sprintf (buf,"%d\n", edev->state & EISA_CONFIG_ENABLED);
}
static DEVICE_ATTR(enabled, S_IRUGO, eisa_show_state, NULL);
static int __init eisa_init_device (struct eisa_root_device *root,
struct eisa_device *edev,
int slot)
{
char *sig;
unsigned long sig_addr;
int i;
sig_addr = SLOT_ADDRESS (root, slot) + EISA_VENDOR_ID_OFFSET;
if (!(sig = decode_eisa_sig (sig_addr)))
return -1; /* No EISA device here */
memcpy (edev->id.sig, sig, EISA_SIG_LEN);
edev->slot = slot;
edev->state = inb (SLOT_ADDRESS (root, slot) + EISA_CONFIG_OFFSET) & EISA_CONFIG_ENABLED;
edev->base_addr = SLOT_ADDRESS (root, slot);
edev->dma_mask = root->dma_mask; /* Default DMA mask */
eisa_name_device (edev);
edev->dev.parent = root->dev;
edev->dev.bus = &eisa_bus_type;
edev->dev.dma_mask = &edev->dma_mask;
edev->dev.coherent_dma_mask = edev->dma_mask;
sprintf (edev->dev.bus_id, "%02X:%02X", root->bus_nr, slot);
for (i = 0; i < EISA_MAX_RESOURCES; i++) {
#ifdef CONFIG_EISA_NAMES
edev->res[i].name = edev->pretty_name;
#else
edev->res[i].name = edev->id.sig;
#endif
}
if (is_forced_dev (enable_dev, enable_dev_count, root, edev))
edev->state = EISA_CONFIG_ENABLED | EISA_CONFIG_FORCED;
if (is_forced_dev (disable_dev, disable_dev_count, root, edev))
edev->state = EISA_CONFIG_FORCED;
return 0;
}
static int __init eisa_register_device (struct eisa_device *edev)
{
if (device_register (&edev->dev))
return -1;
device_create_file (&edev->dev, &dev_attr_signature);
device_create_file (&edev->dev, &dev_attr_enabled);
return 0;
}
static int __init eisa_request_resources (struct eisa_root_device *root,
struct eisa_device *edev,
int slot)
{
int i;
for (i = 0; i < EISA_MAX_RESOURCES; i++) {
/* Don't register resource for slot 0, since this is
* very likely to fail... :-( Instead, grab the EISA
* id, now we can display something in /proc/ioports.
*/
/* Only one region for mainboard */
if (!slot && i > 0) {
edev->res[i].start = edev->res[i].end = 0;
continue;
}
if (slot) {
edev->res[i].name = NULL;
edev->res[i].start = SLOT_ADDRESS (root, slot) + (i * 0x400);
edev->res[i].end = edev->res[i].start + 0xff;
edev->res[i].flags = IORESOURCE_IO;
} else {
edev->res[i].name = NULL;
edev->res[i].start = SLOT_ADDRESS (root, slot) + EISA_VENDOR_ID_OFFSET;
edev->res[i].end = edev->res[i].start + 3;
edev->res[i].flags = IORESOURCE_BUSY;
}
if (request_resource (root->res, &edev->res[i]))
goto failed;
}
return 0;
failed:
while (--i >= 0)
release_resource (&edev->res[i]);
return -1;
}
static void __init eisa_release_resources (struct eisa_device *edev)
{
int i;
for (i = 0; i < EISA_MAX_RESOURCES; i++)
if (edev->res[i].start || edev->res[i].end)
release_resource (&edev->res[i]);
}
static int __init eisa_probe (struct eisa_root_device *root)
{
int i, c;
struct eisa_device *edev;
printk (KERN_INFO "EISA: Probing bus %d at %s\n",
root->bus_nr, root->dev->bus_id);
/* First try to get hold of slot 0. If there is no device
* here, simply fail, unless root->force_probe is set. */
if (!(edev = kmalloc (sizeof (*edev), GFP_KERNEL))) {
printk (KERN_ERR "EISA: Couldn't allocate mainboard slot\n");
return -ENOMEM;
}
memset (edev, 0, sizeof (*edev));
if (eisa_request_resources (root, edev, 0)) {
printk (KERN_WARNING \
"EISA: Cannot allocate resource for mainboard\n");
kfree (edev);
if (!root->force_probe)
return -EBUSY;
goto force_probe;
}
if (eisa_init_device (root, edev, 0)) {
eisa_release_resources (edev);
kfree (edev);
if (!root->force_probe)
return -ENODEV;
goto force_probe;
}
printk (KERN_INFO "EISA: Mainboard %s detected.\n", edev->id.sig);
if (eisa_register_device (edev)) {
printk (KERN_ERR "EISA: Failed to register %s\n",
edev->id.sig);
eisa_release_resources (edev);
kfree (edev);
}
force_probe:
for (c = 0, i = 1; i <= root->slots; i++) {
if (!(edev = kmalloc (sizeof (*edev), GFP_KERNEL))) {
printk (KERN_ERR "EISA: Out of memory for slot %d\n",
i);
continue;
}
memset (edev, 0, sizeof (*edev));
if (eisa_request_resources (root, edev, i)) {
printk (KERN_WARNING \
"Cannot allocate resource for EISA slot %d\n",
i);
kfree (edev);
continue;
}
if (eisa_init_device (root, edev, i)) {
eisa_release_resources (edev);
kfree (edev);
continue;
}
printk (KERN_INFO "EISA: slot %d : %s detected",
i, edev->id.sig);
switch (edev->state) {
case EISA_CONFIG_ENABLED | EISA_CONFIG_FORCED:
printk (" (forced enabled)");
break;
case EISA_CONFIG_FORCED:
printk (" (forced disabled)");
break;
case 0:
printk (" (disabled)");
break;
}
printk (".\n");
c++;
if (eisa_register_device (edev)) {
printk (KERN_ERR "EISA: Failed to register %s\n",
edev->id.sig);
eisa_release_resources (edev);
kfree (edev);
}
}
printk (KERN_INFO "EISA: Detected %d card%s.\n", c, c == 1 ? "" : "s");
return 0;
}
static struct resource eisa_root_res = {
.name = "EISA root resource",
.start = 0,
.end = 0xffffffff,
.flags = IORESOURCE_IO,
};
static int eisa_bus_count;
int __init eisa_root_register (struct eisa_root_device *root)
{
int err;
/* Use our own resources to check if this bus base address has
* been already registered. This prevents the virtual root
* device from registering after the real one has, for
* example... */
root->eisa_root_res.name = eisa_root_res.name;
root->eisa_root_res.start = root->res->start;
root->eisa_root_res.end = root->res->end;
root->eisa_root_res.flags = IORESOURCE_BUSY;
if ((err = request_resource (&eisa_root_res, &root->eisa_root_res)))
return err;
root->bus_nr = eisa_bus_count++;
if ((err = eisa_probe (root)))
release_resource (&root->eisa_root_res);
return err;
}
static int __init eisa_init (void)
{
int r;
if ((r = bus_register (&eisa_bus_type)))
return r;
printk (KERN_INFO "EISA bus registered\n");
return 0;
}
module_param_array(enable_dev, int, &enable_dev_count, 0444);
module_param_array(disable_dev, int, &disable_dev_count, 0444);
postcore_initcall (eisa_init);
int EISA_bus; /* for legacy drivers */
EXPORT_SYMBOL (EISA_bus);
EXPORT_SYMBOL (eisa_bus_type);
EXPORT_SYMBOL (eisa_driver_register);
EXPORT_SYMBOL (eisa_driver_unregister);