Jörgen Storvist 4b2c01ad90 USB: serial: option: add Fibocom NL678 series ... Added USB serial option driver support for Fibocom NL678 series cellular module: VID 2cb7 and PIDs 0x0104 and 0x0105. Reserved network and ADB interfaces. T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2cb7 ProdID=0104 Rev=03.10 S: Manufacturer=Fibocom S: Product=Fibocom NL678-E Modem S: SerialNumber=12345678 C: #Ifs= 6 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=ff Driver=qmi_wwan I: If#= 5 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 3 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=2cb7 ProdID=0105 Rev=03.10 S: Manufacturer=Fibocom S: Product=Fibocom NL678-E Modem S: SerialNumber=12345678 C: #Ifs= 7 Cfg#= 1 Atr=a0 MxPwr=500mA I: If#= 0 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=ff Prot=ff Driver=option I: If#= 1 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 2 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 3 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=00 Driver=option I: If#= 4 Alt= 0 #EPs= 1 Cls=02(commc) Sub=06 Prot=00 Driver=cdc_ether I: If#= 5 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=cdc_ether I: If#= 6 Alt= 0 #EPs= 2 Cls=ff(vend.) Sub=42 Prot=01 Driver=(none) Signed-off-by: Jörgen Storvist <jorgen.storvist@gmail.com> Cc: stable <stable@vger.kernel.org> Acked-by: Johan Hovold <johan@kernel.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>		2018-12-21 16:47:02 +01:00
..
Kconfig	USB: serial: simple: add libtransistor console	2018-04-16 09:19:53 +02:00
Makefile	…
Makefile-keyspan_pda_fw	…
aircable.c	…
ark3116.c	ark3116: switch to ->get_serial()	2018-10-13 00:50:35 -04:00
belkin_sa.c	…
belkin_sa.h	…
bus.c	USB: serial: use tty_port_register_device()	2018-05-17 11:22:00 +02:00
ch341.c	USB: serial: ch341: fix type promotion bug in ch341_control_in()	2018-07-04 15:40:54 +02:00
console.c	USB: serial: console: fix reported terminal settings	2018-12-05 11:29:10 +01:00
cp210x.c	USB-serial updates for v4.19-rc1	2018-07-20 21:47:15 +02:00
cyberjack.c	USB: serial: cyberjack: use irqsave() in USB's complete callback	2018-06-26 14:13:53 +02:00
cypress_m8.c	USB: serial: cypress_m8: remove set but not used variable 'iflag'	2018-10-05 08:58:42 +02:00
cypress_m8.h	…
digi_acceleport.c	USB: serial: digi_acceleport: rename tty flag variable	2018-06-27 07:59:03 +02:00
empeg.c	…
ezusb_convert.pl	…
f81232.c	f81232: switch to ->get_serial()	2018-10-13 00:50:35 -04:00
f81534.c	USB: serial: f81534: fix reading old/new IC config	2018-11-20 18:25:44 +01:00
ftdi_sio.c	USB: serial: ftdi_sio: use rounding when calculating baud rate divisors	2018-11-23 09:49:37 +01:00
ftdi_sio.h	USB: serial: ftdi_sio: add support for FT232R CBUS gpios	2018-10-05 08:57:06 +02:00
ftdi_sio_ids.h	…
garmin_gps.c	…
generic.c	…
io_16654.h	…
io_edgeport.c	io_edgeport: switch to ->get_serial()	2018-10-13 00:50:37 -04:00
io_edgeport.h	…
io_ionsp.h	…
io_ti.c	io_ti: switch to ->get_serial()	2018-10-13 00:50:38 -04:00
io_ti.h	USB: serial: io_ti: fix array underflow in completion handler	2018-08-27 11:52:34 +02:00
io_usbvend.h	…
ipaq.c	…
ipw.c	…
ir-usb.c	USB: serial: cast sizeof() to int when comparing with error code	2018-06-25 10:34:31 +02:00
iuu_phoenix.c	USB: serial: iuu_phoenix: drop redundant input-speed re-encoding	2018-07-16 14:12:11 +02:00
iuu_phoenix.h	…
keyspan.c	…
keyspan_pda.c	USB: serial: keyspan_pda: fix modem-status error handling	2018-07-06 10:32:14 +02:00
keyspan_usa26msg.h	…
keyspan_usa28msg.h	…
keyspan_usa49msg.h	…
keyspan_usa67msg.h	…
keyspan_usa90msg.h	…
kl5kusb105.c	USB: serial: kl5kusb105: remove KLSI device id	2018-07-11 10:11:29 +02:00
kl5kusb105.h	USB: serial: kl5kusb105: remove KLSI device id	2018-07-11 10:11:29 +02:00
kobil_sct.c	USB: serial: kobil_sct: add missing version error handling	2018-07-06 10:42:42 +02:00
kobil_sct.h	…
mct_u232.c	…
mct_u232.h	…
metro-usb.c	…
mos7720.c	mos7720: switch to ->get_serial()	2018-10-13 00:50:38 -04:00
mos7840.c	USB: serial: mos7840: remove set but not used variables 'number, serial'	2018-12-10 10:20:44 +01:00
mxuport.c	…
navman.c	…
omninet.c	…
opticon.c	opticon: switch to ->get_serial()	2018-10-13 00:50:39 -04:00
option.c	USB: serial: option: add Fibocom NL678 series	2018-12-21 16:47:02 +01:00
oti6858.c	…
oti6858.h	…
pl2303.c	USB: serial: pl2303: add ids for Hewlett-Packard HP POS pole displays	2018-12-18 10:22:37 +01:00
pl2303.h	USB: serial: pl2303: add ids for Hewlett-Packard HP POS pole displays	2018-12-18 10:22:37 +01:00
qcaux.c	…
qcserial.c	…
quatech2.c	USB: serial: quatech2: remove set but not used variable 'port_priv'	2018-11-12 10:08:10 +01:00
safe_serial.c	…
sierra.c	USB: serial: sierra: use irqsave() in USB's complete callback	2018-06-26 15:22:25 +02:00
spcp8x5.c	…
ssu100.c	ssu100: switch to ->get_serial()	2018-10-13 00:50:41 -04:00
symbolserial.c	USB: serial: symbolserial: use irqsave() in USB's complete callback	2018-06-26 15:25:01 +02:00
ti_usb_3410_5052.c	Merge branch 'work.tty-ioctl' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs	2018-10-24 14:43:41 +01:00
upd78f0730.c	…
usb-serial-simple.c	USB: serial: simple: add Motorola Tetra MTP6550 id	2018-09-24 15:30:16 +02:00
usb-serial.c	complete ->[sg]et_serial() switchover	2018-10-13 00:50:43 -04:00
usb-wwan.h	usb_wwan: switch to ->[sg]et_serial()	2018-10-13 00:50:42 -04:00
usb_debug.c	…
usb_wwan.c	usb_wwan: switch to ->[sg]et_serial()	2018-10-13 00:50:42 -04:00
visor.c	USB: serial: visor: handle potential invalid device configuration	2018-05-02 09:37:19 +02:00
visor.h	…
whiteheat.c	whiteheat: switch to ->get_serial()	2018-10-13 00:50:42 -04:00
whiteheat.h	…
wishbone-serial.c	…
xsens_mt.c	…