464 lines
12 KiB
C
464 lines
12 KiB
C
/*
|
|
* Philips UCB1400 touchscreen driver
|
|
*
|
|
* Author: Nicolas Pitre
|
|
* Created: September 25, 2006
|
|
* Copyright: MontaVista Software, Inc.
|
|
*
|
|
* Spliting done by: Marek Vasut <marek.vasut@gmail.com>
|
|
* If something doesn't work and it worked before spliting, e-mail me,
|
|
* dont bother Nicolas please ;-)
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
* This code is heavily based on ucb1x00-*.c copyrighted by Russell King
|
|
* covering the UCB1100, UCB1200 and UCB1300.. Support for the UCB1400 has
|
|
* been made separate from ucb1x00-core/ucb1x00-ts on Russell's request.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/wait.h>
|
|
#include <linux/input.h>
|
|
#include <linux/device.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/ucb1400.h>
|
|
|
|
#define UCB1400_TS_POLL_PERIOD 10 /* ms */
|
|
|
|
static bool adcsync;
|
|
static int ts_delay = 55; /* us */
|
|
static int ts_delay_pressure; /* us */
|
|
|
|
/* Switch to interrupt mode. */
|
|
static void ucb1400_ts_mode_int(struct ucb1400_ts *ucb)
|
|
{
|
|
ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
|
|
UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW |
|
|
UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND |
|
|
UCB_TS_CR_MODE_INT);
|
|
}
|
|
|
|
/*
|
|
* Switch to pressure mode, and read pressure. We don't need to wait
|
|
* here, since both plates are being driven.
|
|
*/
|
|
static unsigned int ucb1400_ts_read_pressure(struct ucb1400_ts *ucb)
|
|
{
|
|
ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
|
|
UCB_TS_CR_TSMX_POW | UCB_TS_CR_TSPX_POW |
|
|
UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_GND |
|
|
UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
|
|
|
|
udelay(ts_delay_pressure);
|
|
|
|
return ucb1400_adc_read(ucb->ac97, UCB_ADC_INP_TSPY, adcsync);
|
|
}
|
|
|
|
/*
|
|
* Switch to X position mode and measure Y plate. We switch the plate
|
|
* configuration in pressure mode, then switch to position mode. This
|
|
* gives a faster response time. Even so, we need to wait about 55us
|
|
* for things to stabilise.
|
|
*/
|
|
static unsigned int ucb1400_ts_read_xpos(struct ucb1400_ts *ucb)
|
|
{
|
|
ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
|
|
UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
|
|
UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
|
|
ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
|
|
UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
|
|
UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
|
|
ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
|
|
UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
|
|
UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA);
|
|
|
|
udelay(ts_delay);
|
|
|
|
return ucb1400_adc_read(ucb->ac97, UCB_ADC_INP_TSPY, adcsync);
|
|
}
|
|
|
|
/*
|
|
* Switch to Y position mode and measure X plate. We switch the plate
|
|
* configuration in pressure mode, then switch to position mode. This
|
|
* gives a faster response time. Even so, we need to wait about 55us
|
|
* for things to stabilise.
|
|
*/
|
|
static int ucb1400_ts_read_ypos(struct ucb1400_ts *ucb)
|
|
{
|
|
ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
|
|
UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
|
|
UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
|
|
ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
|
|
UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
|
|
UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
|
|
ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
|
|
UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
|
|
UCB_TS_CR_MODE_POS | UCB_TS_CR_BIAS_ENA);
|
|
|
|
udelay(ts_delay);
|
|
|
|
return ucb1400_adc_read(ucb->ac97, UCB_ADC_INP_TSPX, adcsync);
|
|
}
|
|
|
|
/*
|
|
* Switch to X plate resistance mode. Set MX to ground, PX to
|
|
* supply. Measure current.
|
|
*/
|
|
static unsigned int ucb1400_ts_read_xres(struct ucb1400_ts *ucb)
|
|
{
|
|
ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
|
|
UCB_TS_CR_TSMX_GND | UCB_TS_CR_TSPX_POW |
|
|
UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
|
|
return ucb1400_adc_read(ucb->ac97, 0, adcsync);
|
|
}
|
|
|
|
/*
|
|
* Switch to Y plate resistance mode. Set MY to ground, PY to
|
|
* supply. Measure current.
|
|
*/
|
|
static unsigned int ucb1400_ts_read_yres(struct ucb1400_ts *ucb)
|
|
{
|
|
ucb1400_reg_write(ucb->ac97, UCB_TS_CR,
|
|
UCB_TS_CR_TSMY_GND | UCB_TS_CR_TSPY_POW |
|
|
UCB_TS_CR_MODE_PRES | UCB_TS_CR_BIAS_ENA);
|
|
return ucb1400_adc_read(ucb->ac97, 0, adcsync);
|
|
}
|
|
|
|
static int ucb1400_ts_pen_up(struct ucb1400_ts *ucb)
|
|
{
|
|
unsigned short val = ucb1400_reg_read(ucb->ac97, UCB_TS_CR);
|
|
|
|
return val & (UCB_TS_CR_TSPX_LOW | UCB_TS_CR_TSMX_LOW);
|
|
}
|
|
|
|
static void ucb1400_ts_irq_enable(struct ucb1400_ts *ucb)
|
|
{
|
|
ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, UCB_IE_TSPX);
|
|
ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0);
|
|
ucb1400_reg_write(ucb->ac97, UCB_IE_FAL, UCB_IE_TSPX);
|
|
}
|
|
|
|
static void ucb1400_ts_irq_disable(struct ucb1400_ts *ucb)
|
|
{
|
|
ucb1400_reg_write(ucb->ac97, UCB_IE_FAL, 0);
|
|
}
|
|
|
|
static void ucb1400_ts_report_event(struct input_dev *idev, u16 pressure, u16 x, u16 y)
|
|
{
|
|
input_report_abs(idev, ABS_X, x);
|
|
input_report_abs(idev, ABS_Y, y);
|
|
input_report_abs(idev, ABS_PRESSURE, pressure);
|
|
input_report_key(idev, BTN_TOUCH, 1);
|
|
input_sync(idev);
|
|
}
|
|
|
|
static void ucb1400_ts_event_release(struct input_dev *idev)
|
|
{
|
|
input_report_abs(idev, ABS_PRESSURE, 0);
|
|
input_report_key(idev, BTN_TOUCH, 0);
|
|
input_sync(idev);
|
|
}
|
|
|
|
static void ucb1400_clear_pending_irq(struct ucb1400_ts *ucb)
|
|
{
|
|
unsigned int isr;
|
|
|
|
isr = ucb1400_reg_read(ucb->ac97, UCB_IE_STATUS);
|
|
ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, isr);
|
|
ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0);
|
|
|
|
if (isr & UCB_IE_TSPX)
|
|
ucb1400_ts_irq_disable(ucb);
|
|
else
|
|
dev_dbg(&ucb->ts_idev->dev,
|
|
"ucb1400: unexpected IE_STATUS = %#x\n", isr);
|
|
}
|
|
|
|
/*
|
|
* A restriction with interrupts exists when using the ucb1400, as
|
|
* the codec read/write routines may sleep while waiting for codec
|
|
* access completion and uses semaphores for access control to the
|
|
* AC97 bus. Therefore the driver is forced to use threaded interrupt
|
|
* handler.
|
|
*/
|
|
static irqreturn_t ucb1400_irq(int irqnr, void *devid)
|
|
{
|
|
struct ucb1400_ts *ucb = devid;
|
|
unsigned int x, y, p;
|
|
bool penup;
|
|
|
|
if (unlikely(irqnr != ucb->irq))
|
|
return IRQ_NONE;
|
|
|
|
ucb1400_clear_pending_irq(ucb);
|
|
|
|
/* Start with a small delay before checking pendown state */
|
|
msleep(UCB1400_TS_POLL_PERIOD);
|
|
|
|
while (!ucb->stopped && !(penup = ucb1400_ts_pen_up(ucb))) {
|
|
|
|
ucb1400_adc_enable(ucb->ac97);
|
|
x = ucb1400_ts_read_xpos(ucb);
|
|
y = ucb1400_ts_read_ypos(ucb);
|
|
p = ucb1400_ts_read_pressure(ucb);
|
|
ucb1400_adc_disable(ucb->ac97);
|
|
|
|
ucb1400_ts_report_event(ucb->ts_idev, p, x, y);
|
|
|
|
wait_event_timeout(ucb->ts_wait, ucb->stopped,
|
|
msecs_to_jiffies(UCB1400_TS_POLL_PERIOD));
|
|
}
|
|
|
|
ucb1400_ts_event_release(ucb->ts_idev);
|
|
|
|
if (!ucb->stopped) {
|
|
/* Switch back to interrupt mode. */
|
|
ucb1400_ts_mode_int(ucb);
|
|
ucb1400_ts_irq_enable(ucb);
|
|
}
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void ucb1400_ts_stop(struct ucb1400_ts *ucb)
|
|
{
|
|
/* Signal IRQ thread to stop polling and disable the handler. */
|
|
ucb->stopped = true;
|
|
mb();
|
|
wake_up(&ucb->ts_wait);
|
|
disable_irq(ucb->irq);
|
|
|
|
ucb1400_ts_irq_disable(ucb);
|
|
ucb1400_reg_write(ucb->ac97, UCB_TS_CR, 0);
|
|
}
|
|
|
|
/* Must be called with ts->lock held */
|
|
static void ucb1400_ts_start(struct ucb1400_ts *ucb)
|
|
{
|
|
/* Tell IRQ thread that it may poll the device. */
|
|
ucb->stopped = false;
|
|
mb();
|
|
|
|
ucb1400_ts_mode_int(ucb);
|
|
ucb1400_ts_irq_enable(ucb);
|
|
|
|
enable_irq(ucb->irq);
|
|
}
|
|
|
|
static int ucb1400_ts_open(struct input_dev *idev)
|
|
{
|
|
struct ucb1400_ts *ucb = input_get_drvdata(idev);
|
|
|
|
ucb1400_ts_start(ucb);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void ucb1400_ts_close(struct input_dev *idev)
|
|
{
|
|
struct ucb1400_ts *ucb = input_get_drvdata(idev);
|
|
|
|
ucb1400_ts_stop(ucb);
|
|
}
|
|
|
|
#ifndef NO_IRQ
|
|
#define NO_IRQ 0
|
|
#endif
|
|
|
|
/*
|
|
* Try to probe our interrupt, rather than relying on lots of
|
|
* hard-coded machine dependencies.
|
|
*/
|
|
static int ucb1400_ts_detect_irq(struct ucb1400_ts *ucb,
|
|
struct platform_device *pdev)
|
|
{
|
|
unsigned long mask, timeout;
|
|
|
|
mask = probe_irq_on();
|
|
|
|
/* Enable the ADC interrupt. */
|
|
ucb1400_reg_write(ucb->ac97, UCB_IE_RIS, UCB_IE_ADC);
|
|
ucb1400_reg_write(ucb->ac97, UCB_IE_FAL, UCB_IE_ADC);
|
|
ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0xffff);
|
|
ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0);
|
|
|
|
/* Cause an ADC interrupt. */
|
|
ucb1400_reg_write(ucb->ac97, UCB_ADC_CR, UCB_ADC_ENA);
|
|
ucb1400_reg_write(ucb->ac97, UCB_ADC_CR, UCB_ADC_ENA | UCB_ADC_START);
|
|
|
|
/* Wait for the conversion to complete. */
|
|
timeout = jiffies + HZ/2;
|
|
while (!(ucb1400_reg_read(ucb->ac97, UCB_ADC_DATA) &
|
|
UCB_ADC_DAT_VALID)) {
|
|
cpu_relax();
|
|
if (time_after(jiffies, timeout)) {
|
|
dev_err(&pdev->dev, "timed out in IRQ probe\n");
|
|
probe_irq_off(mask);
|
|
return -ENODEV;
|
|
}
|
|
}
|
|
ucb1400_reg_write(ucb->ac97, UCB_ADC_CR, 0);
|
|
|
|
/* Disable and clear interrupt. */
|
|
ucb1400_reg_write(ucb->ac97, UCB_IE_RIS, 0);
|
|
ucb1400_reg_write(ucb->ac97, UCB_IE_FAL, 0);
|
|
ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0xffff);
|
|
ucb1400_reg_write(ucb->ac97, UCB_IE_CLEAR, 0);
|
|
|
|
/* Read triggered interrupt. */
|
|
ucb->irq = probe_irq_off(mask);
|
|
if (ucb->irq < 0 || ucb->irq == NO_IRQ)
|
|
return -ENODEV;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ucb1400_ts_probe(struct platform_device *pdev)
|
|
{
|
|
struct ucb1400_ts *ucb = dev_get_platdata(&pdev->dev);
|
|
int error, x_res, y_res;
|
|
u16 fcsr;
|
|
|
|
ucb->ts_idev = input_allocate_device();
|
|
if (!ucb->ts_idev) {
|
|
error = -ENOMEM;
|
|
goto err;
|
|
}
|
|
|
|
/* Only in case the IRQ line wasn't supplied, try detecting it */
|
|
if (ucb->irq < 0) {
|
|
error = ucb1400_ts_detect_irq(ucb, pdev);
|
|
if (error) {
|
|
dev_err(&pdev->dev, "IRQ probe failed\n");
|
|
goto err_free_devs;
|
|
}
|
|
}
|
|
dev_dbg(&pdev->dev, "found IRQ %d\n", ucb->irq);
|
|
|
|
init_waitqueue_head(&ucb->ts_wait);
|
|
|
|
input_set_drvdata(ucb->ts_idev, ucb);
|
|
|
|
ucb->ts_idev->dev.parent = &pdev->dev;
|
|
ucb->ts_idev->name = "UCB1400 touchscreen interface";
|
|
ucb->ts_idev->id.vendor = ucb1400_reg_read(ucb->ac97,
|
|
AC97_VENDOR_ID1);
|
|
ucb->ts_idev->id.product = ucb->id;
|
|
ucb->ts_idev->open = ucb1400_ts_open;
|
|
ucb->ts_idev->close = ucb1400_ts_close;
|
|
ucb->ts_idev->evbit[0] = BIT_MASK(EV_ABS) | BIT_MASK(EV_KEY);
|
|
ucb->ts_idev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
|
|
|
|
/*
|
|
* Enable ADC filter to prevent horrible jitter on Colibri.
|
|
* This also further reduces jitter on boards where ADCSYNC
|
|
* pin is connected.
|
|
*/
|
|
fcsr = ucb1400_reg_read(ucb->ac97, UCB_FCSR);
|
|
ucb1400_reg_write(ucb->ac97, UCB_FCSR, fcsr | UCB_FCSR_AVE);
|
|
|
|
ucb1400_adc_enable(ucb->ac97);
|
|
x_res = ucb1400_ts_read_xres(ucb);
|
|
y_res = ucb1400_ts_read_yres(ucb);
|
|
ucb1400_adc_disable(ucb->ac97);
|
|
dev_dbg(&pdev->dev, "x/y = %d/%d\n", x_res, y_res);
|
|
|
|
input_set_abs_params(ucb->ts_idev, ABS_X, 0, x_res, 0, 0);
|
|
input_set_abs_params(ucb->ts_idev, ABS_Y, 0, y_res, 0, 0);
|
|
input_set_abs_params(ucb->ts_idev, ABS_PRESSURE, 0, 0, 0, 0);
|
|
|
|
ucb1400_ts_stop(ucb);
|
|
|
|
error = request_threaded_irq(ucb->irq, NULL, ucb1400_irq,
|
|
IRQF_TRIGGER_RISING | IRQF_ONESHOT,
|
|
"UCB1400", ucb);
|
|
if (error) {
|
|
dev_err(&pdev->dev,
|
|
"unable to grab irq%d: %d\n", ucb->irq, error);
|
|
goto err_free_devs;
|
|
}
|
|
|
|
error = input_register_device(ucb->ts_idev);
|
|
if (error)
|
|
goto err_free_irq;
|
|
|
|
return 0;
|
|
|
|
err_free_irq:
|
|
free_irq(ucb->irq, ucb);
|
|
err_free_devs:
|
|
input_free_device(ucb->ts_idev);
|
|
err:
|
|
return error;
|
|
}
|
|
|
|
static int ucb1400_ts_remove(struct platform_device *pdev)
|
|
{
|
|
struct ucb1400_ts *ucb = dev_get_platdata(&pdev->dev);
|
|
|
|
free_irq(ucb->irq, ucb);
|
|
input_unregister_device(ucb->ts_idev);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused ucb1400_ts_suspend(struct device *dev)
|
|
{
|
|
struct ucb1400_ts *ucb = dev_get_platdata(dev);
|
|
struct input_dev *idev = ucb->ts_idev;
|
|
|
|
mutex_lock(&idev->mutex);
|
|
|
|
if (idev->users)
|
|
ucb1400_ts_start(ucb);
|
|
|
|
mutex_unlock(&idev->mutex);
|
|
return 0;
|
|
}
|
|
|
|
static int __maybe_unused ucb1400_ts_resume(struct device *dev)
|
|
{
|
|
struct ucb1400_ts *ucb = dev_get_platdata(dev);
|
|
struct input_dev *idev = ucb->ts_idev;
|
|
|
|
mutex_lock(&idev->mutex);
|
|
|
|
if (idev->users)
|
|
ucb1400_ts_stop(ucb);
|
|
|
|
mutex_unlock(&idev->mutex);
|
|
return 0;
|
|
}
|
|
|
|
static SIMPLE_DEV_PM_OPS(ucb1400_ts_pm_ops,
|
|
ucb1400_ts_suspend, ucb1400_ts_resume);
|
|
|
|
static struct platform_driver ucb1400_ts_driver = {
|
|
.probe = ucb1400_ts_probe,
|
|
.remove = ucb1400_ts_remove,
|
|
.driver = {
|
|
.name = "ucb1400_ts",
|
|
.pm = &ucb1400_ts_pm_ops,
|
|
},
|
|
};
|
|
module_platform_driver(ucb1400_ts_driver);
|
|
|
|
module_param(adcsync, bool, 0444);
|
|
MODULE_PARM_DESC(adcsync, "Synchronize touch readings with ADCSYNC pin.");
|
|
|
|
module_param(ts_delay, int, 0444);
|
|
MODULE_PARM_DESC(ts_delay, "Delay between panel setup and"
|
|
" position read. Default = 55us.");
|
|
|
|
module_param(ts_delay_pressure, int, 0444);
|
|
MODULE_PARM_DESC(ts_delay_pressure,
|
|
"delay between panel setup and pressure read."
|
|
" Default = 0us.");
|
|
|
|
MODULE_DESCRIPTION("Philips UCB1400 touchscreen driver");
|
|
MODULE_LICENSE("GPL");
|