1056 lines
26 KiB
C
1056 lines
26 KiB
C
/* drivers/devfreq/exynos4210_memorybus.c
|
|
*
|
|
* Copyright (c) 2011 Samsung Electronics Co., Ltd.
|
|
* http://www.samsung.com/
|
|
* MyungJoo Ham <myungjoo.ham@samsung.com>
|
|
*
|
|
* EXYNOS4 - Memory/Bus clock frequency scaling support in DEVFREQ framework
|
|
* This version supports EXYNOS4210 only. This changes bus frequencies
|
|
* and vddint voltages. Exynos4412/4212 should be able to be supported
|
|
* with minor modifications.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*
|
|
*/
|
|
|
|
#include <linux/io.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/suspend.h>
|
|
#include <linux/pm_opp.h>
|
|
#include <linux/devfreq.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/regulator/consumer.h>
|
|
#include <linux/module.h>
|
|
|
|
#include <mach/map.h>
|
|
|
|
#include "exynos_ppmu.h"
|
|
#include "exynos4_bus.h"
|
|
|
|
#define MAX_SAFEVOLT 1200000 /* 1.2V */
|
|
|
|
enum exynos4_busf_type {
|
|
TYPE_BUSF_EXYNOS4210,
|
|
TYPE_BUSF_EXYNOS4x12,
|
|
};
|
|
|
|
/* Assume that the bus is saturated if the utilization is 40% */
|
|
#define BUS_SATURATION_RATIO 40
|
|
|
|
enum busclk_level_idx {
|
|
LV_0 = 0,
|
|
LV_1,
|
|
LV_2,
|
|
LV_3,
|
|
LV_4,
|
|
_LV_END
|
|
};
|
|
|
|
enum exynos_ppmu_idx {
|
|
PPMU_DMC0,
|
|
PPMU_DMC1,
|
|
PPMU_END,
|
|
};
|
|
|
|
#define EX4210_LV_MAX LV_2
|
|
#define EX4x12_LV_MAX LV_4
|
|
#define EX4210_LV_NUM (LV_2 + 1)
|
|
#define EX4x12_LV_NUM (LV_4 + 1)
|
|
|
|
/**
|
|
* struct busfreq_opp_info - opp information for bus
|
|
* @rate: Frequency in hertz
|
|
* @volt: Voltage in microvolts corresponding to this OPP
|
|
*/
|
|
struct busfreq_opp_info {
|
|
unsigned long rate;
|
|
unsigned long volt;
|
|
};
|
|
|
|
struct busfreq_data {
|
|
enum exynos4_busf_type type;
|
|
struct device *dev;
|
|
struct devfreq *devfreq;
|
|
bool disabled;
|
|
struct regulator *vdd_int;
|
|
struct regulator *vdd_mif; /* Exynos4412/4212 only */
|
|
struct busfreq_opp_info curr_oppinfo;
|
|
struct busfreq_ppmu_data ppmu_data;
|
|
|
|
struct notifier_block pm_notifier;
|
|
struct mutex lock;
|
|
|
|
/* Dividers calculated at boot/probe-time */
|
|
unsigned int dmc_divtable[_LV_END]; /* DMC0 */
|
|
unsigned int top_divtable[_LV_END];
|
|
};
|
|
|
|
/* 4210 controls clock of mif and voltage of int */
|
|
static struct bus_opp_table exynos4210_busclk_table[] = {
|
|
{LV_0, 400000, 1150000},
|
|
{LV_1, 267000, 1050000},
|
|
{LV_2, 133000, 1025000},
|
|
{0, 0, 0},
|
|
};
|
|
|
|
/*
|
|
* MIF is the main control knob clock for Exynos4x12 MIF/INT
|
|
* clock and voltage of both mif/int are controlled.
|
|
*/
|
|
static struct bus_opp_table exynos4x12_mifclk_table[] = {
|
|
{LV_0, 400000, 1100000},
|
|
{LV_1, 267000, 1000000},
|
|
{LV_2, 160000, 950000},
|
|
{LV_3, 133000, 950000},
|
|
{LV_4, 100000, 950000},
|
|
{0, 0, 0},
|
|
};
|
|
|
|
/*
|
|
* INT is not the control knob of 4x12. LV_x is not meant to represent
|
|
* the current performance. (MIF does)
|
|
*/
|
|
static struct bus_opp_table exynos4x12_intclk_table[] = {
|
|
{LV_0, 200000, 1000000},
|
|
{LV_1, 160000, 950000},
|
|
{LV_2, 133000, 925000},
|
|
{LV_3, 100000, 900000},
|
|
{0, 0, 0},
|
|
};
|
|
|
|
/* TODO: asv volt definitions are "__initdata"? */
|
|
/* Some chips have different operating voltages */
|
|
static unsigned int exynos4210_asv_volt[][EX4210_LV_NUM] = {
|
|
{1150000, 1050000, 1050000},
|
|
{1125000, 1025000, 1025000},
|
|
{1100000, 1000000, 1000000},
|
|
{1075000, 975000, 975000},
|
|
{1050000, 950000, 950000},
|
|
};
|
|
|
|
static unsigned int exynos4x12_mif_step_50[][EX4x12_LV_NUM] = {
|
|
/* 400 267 160 133 100 */
|
|
{1050000, 950000, 900000, 900000, 900000}, /* ASV0 */
|
|
{1050000, 950000, 900000, 900000, 900000}, /* ASV1 */
|
|
{1050000, 950000, 900000, 900000, 900000}, /* ASV2 */
|
|
{1050000, 900000, 900000, 900000, 900000}, /* ASV3 */
|
|
{1050000, 900000, 900000, 900000, 850000}, /* ASV4 */
|
|
{1050000, 900000, 900000, 850000, 850000}, /* ASV5 */
|
|
{1050000, 900000, 850000, 850000, 850000}, /* ASV6 */
|
|
{1050000, 900000, 850000, 850000, 850000}, /* ASV7 */
|
|
{1050000, 900000, 850000, 850000, 850000}, /* ASV8 */
|
|
};
|
|
|
|
static unsigned int exynos4x12_int_volt[][EX4x12_LV_NUM] = {
|
|
/* 200 160 133 100 */
|
|
{1000000, 950000, 925000, 900000}, /* ASV0 */
|
|
{975000, 925000, 925000, 900000}, /* ASV1 */
|
|
{950000, 925000, 900000, 875000}, /* ASV2 */
|
|
{950000, 900000, 900000, 875000}, /* ASV3 */
|
|
{925000, 875000, 875000, 875000}, /* ASV4 */
|
|
{900000, 850000, 850000, 850000}, /* ASV5 */
|
|
{900000, 850000, 850000, 850000}, /* ASV6 */
|
|
{900000, 850000, 850000, 850000}, /* ASV7 */
|
|
{900000, 850000, 850000, 850000}, /* ASV8 */
|
|
};
|
|
|
|
/*** Clock Divider Data for Exynos4210 ***/
|
|
static unsigned int exynos4210_clkdiv_dmc0[][8] = {
|
|
/*
|
|
* Clock divider value for following
|
|
* { DIVACP, DIVACP_PCLK, DIVDPHY, DIVDMC, DIVDMCD
|
|
* DIVDMCP, DIVCOPY2, DIVCORE_TIMERS }
|
|
*/
|
|
|
|
/* DMC L0: 400MHz */
|
|
{ 3, 1, 1, 1, 1, 1, 3, 1 },
|
|
/* DMC L1: 266.7MHz */
|
|
{ 4, 1, 1, 2, 1, 1, 3, 1 },
|
|
/* DMC L2: 133MHz */
|
|
{ 5, 1, 1, 5, 1, 1, 3, 1 },
|
|
};
|
|
static unsigned int exynos4210_clkdiv_top[][5] = {
|
|
/*
|
|
* Clock divider value for following
|
|
* { DIVACLK200, DIVACLK100, DIVACLK160, DIVACLK133, DIVONENAND }
|
|
*/
|
|
/* ACLK200 L0: 200MHz */
|
|
{ 3, 7, 4, 5, 1 },
|
|
/* ACLK200 L1: 160MHz */
|
|
{ 4, 7, 5, 6, 1 },
|
|
/* ACLK200 L2: 133MHz */
|
|
{ 5, 7, 7, 7, 1 },
|
|
};
|
|
static unsigned int exynos4210_clkdiv_lr_bus[][2] = {
|
|
/*
|
|
* Clock divider value for following
|
|
* { DIVGDL/R, DIVGPL/R }
|
|
*/
|
|
/* ACLK_GDL/R L1: 200MHz */
|
|
{ 3, 1 },
|
|
/* ACLK_GDL/R L2: 160MHz */
|
|
{ 4, 1 },
|
|
/* ACLK_GDL/R L3: 133MHz */
|
|
{ 5, 1 },
|
|
};
|
|
|
|
/*** Clock Divider Data for Exynos4212/4412 ***/
|
|
static unsigned int exynos4x12_clkdiv_dmc0[][6] = {
|
|
/*
|
|
* Clock divider value for following
|
|
* { DIVACP, DIVACP_PCLK, DIVDPHY, DIVDMC, DIVDMCD
|
|
* DIVDMCP}
|
|
*/
|
|
|
|
/* DMC L0: 400MHz */
|
|
{3, 1, 1, 1, 1, 1},
|
|
/* DMC L1: 266.7MHz */
|
|
{4, 1, 1, 2, 1, 1},
|
|
/* DMC L2: 160MHz */
|
|
{5, 1, 1, 4, 1, 1},
|
|
/* DMC L3: 133MHz */
|
|
{5, 1, 1, 5, 1, 1},
|
|
/* DMC L4: 100MHz */
|
|
{7, 1, 1, 7, 1, 1},
|
|
};
|
|
static unsigned int exynos4x12_clkdiv_dmc1[][6] = {
|
|
/*
|
|
* Clock divider value for following
|
|
* { G2DACP, DIVC2C, DIVC2C_ACLK }
|
|
*/
|
|
|
|
/* DMC L0: 400MHz */
|
|
{3, 1, 1},
|
|
/* DMC L1: 266.7MHz */
|
|
{4, 2, 1},
|
|
/* DMC L2: 160MHz */
|
|
{5, 4, 1},
|
|
/* DMC L3: 133MHz */
|
|
{5, 5, 1},
|
|
/* DMC L4: 100MHz */
|
|
{7, 7, 1},
|
|
};
|
|
static unsigned int exynos4x12_clkdiv_top[][5] = {
|
|
/*
|
|
* Clock divider value for following
|
|
* { DIVACLK266_GPS, DIVACLK100, DIVACLK160,
|
|
DIVACLK133, DIVONENAND }
|
|
*/
|
|
|
|
/* ACLK_GDL/R L0: 200MHz */
|
|
{2, 7, 4, 5, 1},
|
|
/* ACLK_GDL/R L1: 200MHz */
|
|
{2, 7, 4, 5, 1},
|
|
/* ACLK_GDL/R L2: 160MHz */
|
|
{4, 7, 5, 7, 1},
|
|
/* ACLK_GDL/R L3: 133MHz */
|
|
{4, 7, 5, 7, 1},
|
|
/* ACLK_GDL/R L4: 100MHz */
|
|
{7, 7, 7, 7, 1},
|
|
};
|
|
static unsigned int exynos4x12_clkdiv_lr_bus[][2] = {
|
|
/*
|
|
* Clock divider value for following
|
|
* { DIVGDL/R, DIVGPL/R }
|
|
*/
|
|
|
|
/* ACLK_GDL/R L0: 200MHz */
|
|
{3, 1},
|
|
/* ACLK_GDL/R L1: 200MHz */
|
|
{3, 1},
|
|
/* ACLK_GDL/R L2: 160MHz */
|
|
{4, 1},
|
|
/* ACLK_GDL/R L3: 133MHz */
|
|
{5, 1},
|
|
/* ACLK_GDL/R L4: 100MHz */
|
|
{7, 1},
|
|
};
|
|
static unsigned int exynos4x12_clkdiv_sclkip[][3] = {
|
|
/*
|
|
* Clock divider value for following
|
|
* { DIVMFC, DIVJPEG, DIVFIMC0~3}
|
|
*/
|
|
|
|
/* SCLK_MFC: 200MHz */
|
|
{3, 3, 4},
|
|
/* SCLK_MFC: 200MHz */
|
|
{3, 3, 4},
|
|
/* SCLK_MFC: 160MHz */
|
|
{4, 4, 5},
|
|
/* SCLK_MFC: 133MHz */
|
|
{5, 5, 5},
|
|
/* SCLK_MFC: 100MHz */
|
|
{7, 7, 7},
|
|
};
|
|
|
|
|
|
static int exynos4210_set_busclk(struct busfreq_data *data,
|
|
struct busfreq_opp_info *oppi)
|
|
{
|
|
unsigned int index;
|
|
unsigned int tmp;
|
|
|
|
for (index = LV_0; index < EX4210_LV_NUM; index++)
|
|
if (oppi->rate == exynos4210_busclk_table[index].clk)
|
|
break;
|
|
|
|
if (index == EX4210_LV_NUM)
|
|
return -EINVAL;
|
|
|
|
/* Change Divider - DMC0 */
|
|
tmp = data->dmc_divtable[index];
|
|
|
|
__raw_writel(tmp, EXYNOS4_CLKDIV_DMC0);
|
|
|
|
do {
|
|
tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_DMC0);
|
|
} while (tmp & 0x11111111);
|
|
|
|
/* Change Divider - TOP */
|
|
tmp = data->top_divtable[index];
|
|
|
|
__raw_writel(tmp, EXYNOS4_CLKDIV_TOP);
|
|
|
|
do {
|
|
tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_TOP);
|
|
} while (tmp & 0x11111);
|
|
|
|
/* Change Divider - LEFTBUS */
|
|
tmp = __raw_readl(EXYNOS4_CLKDIV_LEFTBUS);
|
|
|
|
tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK);
|
|
|
|
tmp |= ((exynos4210_clkdiv_lr_bus[index][0] <<
|
|
EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) |
|
|
(exynos4210_clkdiv_lr_bus[index][1] <<
|
|
EXYNOS4_CLKDIV_BUS_GPLR_SHIFT));
|
|
|
|
__raw_writel(tmp, EXYNOS4_CLKDIV_LEFTBUS);
|
|
|
|
do {
|
|
tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_LEFTBUS);
|
|
} while (tmp & 0x11);
|
|
|
|
/* Change Divider - RIGHTBUS */
|
|
tmp = __raw_readl(EXYNOS4_CLKDIV_RIGHTBUS);
|
|
|
|
tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK);
|
|
|
|
tmp |= ((exynos4210_clkdiv_lr_bus[index][0] <<
|
|
EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) |
|
|
(exynos4210_clkdiv_lr_bus[index][1] <<
|
|
EXYNOS4_CLKDIV_BUS_GPLR_SHIFT));
|
|
|
|
__raw_writel(tmp, EXYNOS4_CLKDIV_RIGHTBUS);
|
|
|
|
do {
|
|
tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_RIGHTBUS);
|
|
} while (tmp & 0x11);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int exynos4x12_set_busclk(struct busfreq_data *data,
|
|
struct busfreq_opp_info *oppi)
|
|
{
|
|
unsigned int index;
|
|
unsigned int tmp;
|
|
|
|
for (index = LV_0; index < EX4x12_LV_NUM; index++)
|
|
if (oppi->rate == exynos4x12_mifclk_table[index].clk)
|
|
break;
|
|
|
|
if (index == EX4x12_LV_NUM)
|
|
return -EINVAL;
|
|
|
|
/* Change Divider - DMC0 */
|
|
tmp = data->dmc_divtable[index];
|
|
|
|
__raw_writel(tmp, EXYNOS4_CLKDIV_DMC0);
|
|
|
|
do {
|
|
tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_DMC0);
|
|
} while (tmp & 0x11111111);
|
|
|
|
/* Change Divider - DMC1 */
|
|
tmp = __raw_readl(EXYNOS4_CLKDIV_DMC1);
|
|
|
|
tmp &= ~(EXYNOS4_CLKDIV_DMC1_G2D_ACP_MASK |
|
|
EXYNOS4_CLKDIV_DMC1_C2C_MASK |
|
|
EXYNOS4_CLKDIV_DMC1_C2CACLK_MASK);
|
|
|
|
tmp |= ((exynos4x12_clkdiv_dmc1[index][0] <<
|
|
EXYNOS4_CLKDIV_DMC1_G2D_ACP_SHIFT) |
|
|
(exynos4x12_clkdiv_dmc1[index][1] <<
|
|
EXYNOS4_CLKDIV_DMC1_C2C_SHIFT) |
|
|
(exynos4x12_clkdiv_dmc1[index][2] <<
|
|
EXYNOS4_CLKDIV_DMC1_C2CACLK_SHIFT));
|
|
|
|
__raw_writel(tmp, EXYNOS4_CLKDIV_DMC1);
|
|
|
|
do {
|
|
tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_DMC1);
|
|
} while (tmp & 0x111111);
|
|
|
|
/* Change Divider - TOP */
|
|
tmp = __raw_readl(EXYNOS4_CLKDIV_TOP);
|
|
|
|
tmp &= ~(EXYNOS4_CLKDIV_TOP_ACLK266_GPS_MASK |
|
|
EXYNOS4_CLKDIV_TOP_ACLK100_MASK |
|
|
EXYNOS4_CLKDIV_TOP_ACLK160_MASK |
|
|
EXYNOS4_CLKDIV_TOP_ACLK133_MASK |
|
|
EXYNOS4_CLKDIV_TOP_ONENAND_MASK);
|
|
|
|
tmp |= ((exynos4x12_clkdiv_top[index][0] <<
|
|
EXYNOS4_CLKDIV_TOP_ACLK266_GPS_SHIFT) |
|
|
(exynos4x12_clkdiv_top[index][1] <<
|
|
EXYNOS4_CLKDIV_TOP_ACLK100_SHIFT) |
|
|
(exynos4x12_clkdiv_top[index][2] <<
|
|
EXYNOS4_CLKDIV_TOP_ACLK160_SHIFT) |
|
|
(exynos4x12_clkdiv_top[index][3] <<
|
|
EXYNOS4_CLKDIV_TOP_ACLK133_SHIFT) |
|
|
(exynos4x12_clkdiv_top[index][4] <<
|
|
EXYNOS4_CLKDIV_TOP_ONENAND_SHIFT));
|
|
|
|
__raw_writel(tmp, EXYNOS4_CLKDIV_TOP);
|
|
|
|
do {
|
|
tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_TOP);
|
|
} while (tmp & 0x11111);
|
|
|
|
/* Change Divider - LEFTBUS */
|
|
tmp = __raw_readl(EXYNOS4_CLKDIV_LEFTBUS);
|
|
|
|
tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK);
|
|
|
|
tmp |= ((exynos4x12_clkdiv_lr_bus[index][0] <<
|
|
EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) |
|
|
(exynos4x12_clkdiv_lr_bus[index][1] <<
|
|
EXYNOS4_CLKDIV_BUS_GPLR_SHIFT));
|
|
|
|
__raw_writel(tmp, EXYNOS4_CLKDIV_LEFTBUS);
|
|
|
|
do {
|
|
tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_LEFTBUS);
|
|
} while (tmp & 0x11);
|
|
|
|
/* Change Divider - RIGHTBUS */
|
|
tmp = __raw_readl(EXYNOS4_CLKDIV_RIGHTBUS);
|
|
|
|
tmp &= ~(EXYNOS4_CLKDIV_BUS_GDLR_MASK | EXYNOS4_CLKDIV_BUS_GPLR_MASK);
|
|
|
|
tmp |= ((exynos4x12_clkdiv_lr_bus[index][0] <<
|
|
EXYNOS4_CLKDIV_BUS_GDLR_SHIFT) |
|
|
(exynos4x12_clkdiv_lr_bus[index][1] <<
|
|
EXYNOS4_CLKDIV_BUS_GPLR_SHIFT));
|
|
|
|
__raw_writel(tmp, EXYNOS4_CLKDIV_RIGHTBUS);
|
|
|
|
do {
|
|
tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_RIGHTBUS);
|
|
} while (tmp & 0x11);
|
|
|
|
/* Change Divider - MFC */
|
|
tmp = __raw_readl(EXYNOS4_CLKDIV_MFC);
|
|
|
|
tmp &= ~(EXYNOS4_CLKDIV_MFC_MASK);
|
|
|
|
tmp |= ((exynos4x12_clkdiv_sclkip[index][0] <<
|
|
EXYNOS4_CLKDIV_MFC_SHIFT));
|
|
|
|
__raw_writel(tmp, EXYNOS4_CLKDIV_MFC);
|
|
|
|
do {
|
|
tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_MFC);
|
|
} while (tmp & 0x1);
|
|
|
|
/* Change Divider - JPEG */
|
|
tmp = __raw_readl(EXYNOS4_CLKDIV_CAM1);
|
|
|
|
tmp &= ~(EXYNOS4_CLKDIV_CAM1_JPEG_MASK);
|
|
|
|
tmp |= ((exynos4x12_clkdiv_sclkip[index][1] <<
|
|
EXYNOS4_CLKDIV_CAM1_JPEG_SHIFT));
|
|
|
|
__raw_writel(tmp, EXYNOS4_CLKDIV_CAM1);
|
|
|
|
do {
|
|
tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_CAM1);
|
|
} while (tmp & 0x1);
|
|
|
|
/* Change Divider - FIMC0~3 */
|
|
tmp = __raw_readl(EXYNOS4_CLKDIV_CAM);
|
|
|
|
tmp &= ~(EXYNOS4_CLKDIV_CAM_FIMC0_MASK | EXYNOS4_CLKDIV_CAM_FIMC1_MASK |
|
|
EXYNOS4_CLKDIV_CAM_FIMC2_MASK | EXYNOS4_CLKDIV_CAM_FIMC3_MASK);
|
|
|
|
tmp |= ((exynos4x12_clkdiv_sclkip[index][2] <<
|
|
EXYNOS4_CLKDIV_CAM_FIMC0_SHIFT) |
|
|
(exynos4x12_clkdiv_sclkip[index][2] <<
|
|
EXYNOS4_CLKDIV_CAM_FIMC1_SHIFT) |
|
|
(exynos4x12_clkdiv_sclkip[index][2] <<
|
|
EXYNOS4_CLKDIV_CAM_FIMC2_SHIFT) |
|
|
(exynos4x12_clkdiv_sclkip[index][2] <<
|
|
EXYNOS4_CLKDIV_CAM_FIMC3_SHIFT));
|
|
|
|
__raw_writel(tmp, EXYNOS4_CLKDIV_CAM);
|
|
|
|
do {
|
|
tmp = __raw_readl(EXYNOS4_CLKDIV_STAT_CAM1);
|
|
} while (tmp & 0x1111);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int exynos4x12_get_intspec(unsigned long mifclk)
|
|
{
|
|
int i = 0;
|
|
|
|
while (exynos4x12_intclk_table[i].clk) {
|
|
if (exynos4x12_intclk_table[i].clk <= mifclk)
|
|
return i;
|
|
i++;
|
|
}
|
|
|
|
return -EINVAL;
|
|
}
|
|
|
|
static int exynos4_bus_setvolt(struct busfreq_data *data,
|
|
struct busfreq_opp_info *oppi,
|
|
struct busfreq_opp_info *oldoppi)
|
|
{
|
|
int err = 0, tmp;
|
|
unsigned long volt = oppi->volt;
|
|
|
|
switch (data->type) {
|
|
case TYPE_BUSF_EXYNOS4210:
|
|
/* OPP represents DMC clock + INT voltage */
|
|
err = regulator_set_voltage(data->vdd_int, volt,
|
|
MAX_SAFEVOLT);
|
|
break;
|
|
case TYPE_BUSF_EXYNOS4x12:
|
|
/* OPP represents MIF clock + MIF voltage */
|
|
err = regulator_set_voltage(data->vdd_mif, volt,
|
|
MAX_SAFEVOLT);
|
|
if (err)
|
|
break;
|
|
|
|
tmp = exynos4x12_get_intspec(oppi->rate);
|
|
if (tmp < 0) {
|
|
err = tmp;
|
|
regulator_set_voltage(data->vdd_mif,
|
|
oldoppi->volt,
|
|
MAX_SAFEVOLT);
|
|
break;
|
|
}
|
|
err = regulator_set_voltage(data->vdd_int,
|
|
exynos4x12_intclk_table[tmp].volt,
|
|
MAX_SAFEVOLT);
|
|
/* Try to recover */
|
|
if (err)
|
|
regulator_set_voltage(data->vdd_mif,
|
|
oldoppi->volt,
|
|
MAX_SAFEVOLT);
|
|
break;
|
|
default:
|
|
err = -EINVAL;
|
|
}
|
|
|
|
return err;
|
|
}
|
|
|
|
static int exynos4_bus_target(struct device *dev, unsigned long *_freq,
|
|
u32 flags)
|
|
{
|
|
int err = 0;
|
|
struct platform_device *pdev = container_of(dev, struct platform_device,
|
|
dev);
|
|
struct busfreq_data *data = platform_get_drvdata(pdev);
|
|
struct dev_pm_opp *opp;
|
|
unsigned long freq;
|
|
unsigned long old_freq = data->curr_oppinfo.rate;
|
|
struct busfreq_opp_info new_oppinfo;
|
|
|
|
rcu_read_lock();
|
|
opp = devfreq_recommended_opp(dev, _freq, flags);
|
|
if (IS_ERR(opp)) {
|
|
rcu_read_unlock();
|
|
return PTR_ERR(opp);
|
|
}
|
|
new_oppinfo.rate = dev_pm_opp_get_freq(opp);
|
|
new_oppinfo.volt = dev_pm_opp_get_voltage(opp);
|
|
rcu_read_unlock();
|
|
freq = new_oppinfo.rate;
|
|
|
|
if (old_freq == freq)
|
|
return 0;
|
|
|
|
dev_dbg(dev, "targeting %lukHz %luuV\n", freq, new_oppinfo.volt);
|
|
|
|
mutex_lock(&data->lock);
|
|
|
|
if (data->disabled)
|
|
goto out;
|
|
|
|
if (old_freq < freq)
|
|
err = exynos4_bus_setvolt(data, &new_oppinfo,
|
|
&data->curr_oppinfo);
|
|
if (err)
|
|
goto out;
|
|
|
|
if (old_freq != freq) {
|
|
switch (data->type) {
|
|
case TYPE_BUSF_EXYNOS4210:
|
|
err = exynos4210_set_busclk(data, &new_oppinfo);
|
|
break;
|
|
case TYPE_BUSF_EXYNOS4x12:
|
|
err = exynos4x12_set_busclk(data, &new_oppinfo);
|
|
break;
|
|
default:
|
|
err = -EINVAL;
|
|
}
|
|
}
|
|
if (err)
|
|
goto out;
|
|
|
|
if (old_freq > freq)
|
|
err = exynos4_bus_setvolt(data, &new_oppinfo,
|
|
&data->curr_oppinfo);
|
|
if (err)
|
|
goto out;
|
|
|
|
data->curr_oppinfo = new_oppinfo;
|
|
out:
|
|
mutex_unlock(&data->lock);
|
|
return err;
|
|
}
|
|
|
|
static int exynos4_bus_get_dev_status(struct device *dev,
|
|
struct devfreq_dev_status *stat)
|
|
{
|
|
struct busfreq_data *data = dev_get_drvdata(dev);
|
|
struct busfreq_ppmu_data *ppmu_data = &data->ppmu_data;
|
|
int busier;
|
|
|
|
exynos_read_ppmu(ppmu_data);
|
|
busier = exynos_get_busier_ppmu(ppmu_data);
|
|
stat->current_frequency = data->curr_oppinfo.rate;
|
|
|
|
/* Number of cycles spent on memory access */
|
|
stat->busy_time = ppmu_data->ppmu[busier].count[PPMU_PMNCNT3];
|
|
stat->busy_time *= 100 / BUS_SATURATION_RATIO;
|
|
stat->total_time = ppmu_data->ppmu[busier].ccnt;
|
|
|
|
/* If the counters have overflown, retry */
|
|
if (ppmu_data->ppmu[busier].ccnt_overflow ||
|
|
ppmu_data->ppmu[busier].count_overflow[0])
|
|
return -EAGAIN;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct devfreq_dev_profile exynos4_devfreq_profile = {
|
|
.initial_freq = 400000,
|
|
.polling_ms = 50,
|
|
.target = exynos4_bus_target,
|
|
.get_dev_status = exynos4_bus_get_dev_status,
|
|
};
|
|
|
|
static int exynos4210_init_tables(struct busfreq_data *data)
|
|
{
|
|
u32 tmp;
|
|
int mgrp;
|
|
int i, err = 0;
|
|
|
|
tmp = __raw_readl(EXYNOS4_CLKDIV_DMC0);
|
|
for (i = LV_0; i < EX4210_LV_NUM; i++) {
|
|
tmp &= ~(EXYNOS4_CLKDIV_DMC0_ACP_MASK |
|
|
EXYNOS4_CLKDIV_DMC0_ACPPCLK_MASK |
|
|
EXYNOS4_CLKDIV_DMC0_DPHY_MASK |
|
|
EXYNOS4_CLKDIV_DMC0_DMC_MASK |
|
|
EXYNOS4_CLKDIV_DMC0_DMCD_MASK |
|
|
EXYNOS4_CLKDIV_DMC0_DMCP_MASK |
|
|
EXYNOS4_CLKDIV_DMC0_COPY2_MASK |
|
|
EXYNOS4_CLKDIV_DMC0_CORETI_MASK);
|
|
|
|
tmp |= ((exynos4210_clkdiv_dmc0[i][0] <<
|
|
EXYNOS4_CLKDIV_DMC0_ACP_SHIFT) |
|
|
(exynos4210_clkdiv_dmc0[i][1] <<
|
|
EXYNOS4_CLKDIV_DMC0_ACPPCLK_SHIFT) |
|
|
(exynos4210_clkdiv_dmc0[i][2] <<
|
|
EXYNOS4_CLKDIV_DMC0_DPHY_SHIFT) |
|
|
(exynos4210_clkdiv_dmc0[i][3] <<
|
|
EXYNOS4_CLKDIV_DMC0_DMC_SHIFT) |
|
|
(exynos4210_clkdiv_dmc0[i][4] <<
|
|
EXYNOS4_CLKDIV_DMC0_DMCD_SHIFT) |
|
|
(exynos4210_clkdiv_dmc0[i][5] <<
|
|
EXYNOS4_CLKDIV_DMC0_DMCP_SHIFT) |
|
|
(exynos4210_clkdiv_dmc0[i][6] <<
|
|
EXYNOS4_CLKDIV_DMC0_COPY2_SHIFT) |
|
|
(exynos4210_clkdiv_dmc0[i][7] <<
|
|
EXYNOS4_CLKDIV_DMC0_CORETI_SHIFT));
|
|
|
|
data->dmc_divtable[i] = tmp;
|
|
}
|
|
|
|
tmp = __raw_readl(EXYNOS4_CLKDIV_TOP);
|
|
for (i = LV_0; i < EX4210_LV_NUM; i++) {
|
|
tmp &= ~(EXYNOS4_CLKDIV_TOP_ACLK200_MASK |
|
|
EXYNOS4_CLKDIV_TOP_ACLK100_MASK |
|
|
EXYNOS4_CLKDIV_TOP_ACLK160_MASK |
|
|
EXYNOS4_CLKDIV_TOP_ACLK133_MASK |
|
|
EXYNOS4_CLKDIV_TOP_ONENAND_MASK);
|
|
|
|
tmp |= ((exynos4210_clkdiv_top[i][0] <<
|
|
EXYNOS4_CLKDIV_TOP_ACLK200_SHIFT) |
|
|
(exynos4210_clkdiv_top[i][1] <<
|
|
EXYNOS4_CLKDIV_TOP_ACLK100_SHIFT) |
|
|
(exynos4210_clkdiv_top[i][2] <<
|
|
EXYNOS4_CLKDIV_TOP_ACLK160_SHIFT) |
|
|
(exynos4210_clkdiv_top[i][3] <<
|
|
EXYNOS4_CLKDIV_TOP_ACLK133_SHIFT) |
|
|
(exynos4210_clkdiv_top[i][4] <<
|
|
EXYNOS4_CLKDIV_TOP_ONENAND_SHIFT));
|
|
|
|
data->top_divtable[i] = tmp;
|
|
}
|
|
|
|
/*
|
|
* TODO: init tmp based on busfreq_data
|
|
* (device-tree or platform-data)
|
|
*/
|
|
tmp = 0; /* Max voltages for the reliability of the unknown */
|
|
|
|
pr_debug("ASV Group of Exynos4 is %d\n", tmp);
|
|
/* Use merged grouping for voltage */
|
|
switch (tmp) {
|
|
case 0:
|
|
mgrp = 0;
|
|
break;
|
|
case 1:
|
|
case 2:
|
|
mgrp = 1;
|
|
break;
|
|
case 3:
|
|
case 4:
|
|
mgrp = 2;
|
|
break;
|
|
case 5:
|
|
case 6:
|
|
mgrp = 3;
|
|
break;
|
|
case 7:
|
|
mgrp = 4;
|
|
break;
|
|
default:
|
|
pr_warn("Unknown ASV Group. Use max voltage.\n");
|
|
mgrp = 0;
|
|
}
|
|
|
|
for (i = LV_0; i < EX4210_LV_NUM; i++)
|
|
exynos4210_busclk_table[i].volt = exynos4210_asv_volt[mgrp][i];
|
|
|
|
for (i = LV_0; i < EX4210_LV_NUM; i++) {
|
|
err = dev_pm_opp_add(data->dev, exynos4210_busclk_table[i].clk,
|
|
exynos4210_busclk_table[i].volt);
|
|
if (err) {
|
|
dev_err(data->dev, "Cannot add opp entries.\n");
|
|
return err;
|
|
}
|
|
}
|
|
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int exynos4x12_init_tables(struct busfreq_data *data)
|
|
{
|
|
unsigned int i;
|
|
unsigned int tmp;
|
|
int ret;
|
|
|
|
/* Enable pause function for DREX2 DVFS */
|
|
tmp = __raw_readl(EXYNOS4_DMC_PAUSE_CTRL);
|
|
tmp |= EXYNOS4_DMC_PAUSE_ENABLE;
|
|
__raw_writel(tmp, EXYNOS4_DMC_PAUSE_CTRL);
|
|
|
|
tmp = __raw_readl(EXYNOS4_CLKDIV_DMC0);
|
|
|
|
for (i = 0; i < EX4x12_LV_NUM; i++) {
|
|
tmp &= ~(EXYNOS4_CLKDIV_DMC0_ACP_MASK |
|
|
EXYNOS4_CLKDIV_DMC0_ACPPCLK_MASK |
|
|
EXYNOS4_CLKDIV_DMC0_DPHY_MASK |
|
|
EXYNOS4_CLKDIV_DMC0_DMC_MASK |
|
|
EXYNOS4_CLKDIV_DMC0_DMCD_MASK |
|
|
EXYNOS4_CLKDIV_DMC0_DMCP_MASK);
|
|
|
|
tmp |= ((exynos4x12_clkdiv_dmc0[i][0] <<
|
|
EXYNOS4_CLKDIV_DMC0_ACP_SHIFT) |
|
|
(exynos4x12_clkdiv_dmc0[i][1] <<
|
|
EXYNOS4_CLKDIV_DMC0_ACPPCLK_SHIFT) |
|
|
(exynos4x12_clkdiv_dmc0[i][2] <<
|
|
EXYNOS4_CLKDIV_DMC0_DPHY_SHIFT) |
|
|
(exynos4x12_clkdiv_dmc0[i][3] <<
|
|
EXYNOS4_CLKDIV_DMC0_DMC_SHIFT) |
|
|
(exynos4x12_clkdiv_dmc0[i][4] <<
|
|
EXYNOS4_CLKDIV_DMC0_DMCD_SHIFT) |
|
|
(exynos4x12_clkdiv_dmc0[i][5] <<
|
|
EXYNOS4_CLKDIV_DMC0_DMCP_SHIFT));
|
|
|
|
data->dmc_divtable[i] = tmp;
|
|
}
|
|
|
|
tmp = 0; /* Max voltages for the reliability of the unknown */
|
|
|
|
if (tmp > 8)
|
|
tmp = 0;
|
|
pr_debug("ASV Group of Exynos4x12 is %d\n", tmp);
|
|
|
|
for (i = 0; i < EX4x12_LV_NUM; i++) {
|
|
exynos4x12_mifclk_table[i].volt =
|
|
exynos4x12_mif_step_50[tmp][i];
|
|
exynos4x12_intclk_table[i].volt =
|
|
exynos4x12_int_volt[tmp][i];
|
|
}
|
|
|
|
for (i = 0; i < EX4x12_LV_NUM; i++) {
|
|
ret = dev_pm_opp_add(data->dev, exynos4x12_mifclk_table[i].clk,
|
|
exynos4x12_mifclk_table[i].volt);
|
|
if (ret) {
|
|
dev_err(data->dev, "Fail to add opp entries.\n");
|
|
return ret;
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int exynos4_busfreq_pm_notifier_event(struct notifier_block *this,
|
|
unsigned long event, void *ptr)
|
|
{
|
|
struct busfreq_data *data = container_of(this, struct busfreq_data,
|
|
pm_notifier);
|
|
struct dev_pm_opp *opp;
|
|
struct busfreq_opp_info new_oppinfo;
|
|
unsigned long maxfreq = ULONG_MAX;
|
|
int err = 0;
|
|
|
|
switch (event) {
|
|
case PM_SUSPEND_PREPARE:
|
|
/* Set Fastest and Deactivate DVFS */
|
|
mutex_lock(&data->lock);
|
|
|
|
data->disabled = true;
|
|
|
|
rcu_read_lock();
|
|
opp = dev_pm_opp_find_freq_floor(data->dev, &maxfreq);
|
|
if (IS_ERR(opp)) {
|
|
rcu_read_unlock();
|
|
dev_err(data->dev, "%s: unable to find a min freq\n",
|
|
__func__);
|
|
mutex_unlock(&data->lock);
|
|
return PTR_ERR(opp);
|
|
}
|
|
new_oppinfo.rate = dev_pm_opp_get_freq(opp);
|
|
new_oppinfo.volt = dev_pm_opp_get_voltage(opp);
|
|
rcu_read_unlock();
|
|
|
|
err = exynos4_bus_setvolt(data, &new_oppinfo,
|
|
&data->curr_oppinfo);
|
|
if (err)
|
|
goto unlock;
|
|
|
|
switch (data->type) {
|
|
case TYPE_BUSF_EXYNOS4210:
|
|
err = exynos4210_set_busclk(data, &new_oppinfo);
|
|
break;
|
|
case TYPE_BUSF_EXYNOS4x12:
|
|
err = exynos4x12_set_busclk(data, &new_oppinfo);
|
|
break;
|
|
default:
|
|
err = -EINVAL;
|
|
}
|
|
if (err)
|
|
goto unlock;
|
|
|
|
data->curr_oppinfo = new_oppinfo;
|
|
unlock:
|
|
mutex_unlock(&data->lock);
|
|
if (err)
|
|
return err;
|
|
return NOTIFY_OK;
|
|
case PM_POST_RESTORE:
|
|
case PM_POST_SUSPEND:
|
|
/* Reactivate */
|
|
mutex_lock(&data->lock);
|
|
data->disabled = false;
|
|
mutex_unlock(&data->lock);
|
|
return NOTIFY_OK;
|
|
}
|
|
|
|
return NOTIFY_DONE;
|
|
}
|
|
|
|
static int exynos4_busfreq_probe(struct platform_device *pdev)
|
|
{
|
|
struct busfreq_data *data;
|
|
struct busfreq_ppmu_data *ppmu_data;
|
|
struct dev_pm_opp *opp;
|
|
struct device *dev = &pdev->dev;
|
|
int err = 0;
|
|
|
|
data = devm_kzalloc(&pdev->dev, sizeof(struct busfreq_data), GFP_KERNEL);
|
|
if (data == NULL) {
|
|
dev_err(dev, "Cannot allocate memory.\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
ppmu_data = &data->ppmu_data;
|
|
ppmu_data->ppmu_end = PPMU_END;
|
|
ppmu_data->ppmu = devm_kzalloc(dev,
|
|
sizeof(struct exynos_ppmu) * PPMU_END,
|
|
GFP_KERNEL);
|
|
if (!ppmu_data->ppmu) {
|
|
dev_err(dev, "Failed to allocate memory for exynos_ppmu\n");
|
|
return -ENOMEM;
|
|
}
|
|
|
|
data->type = pdev->id_entry->driver_data;
|
|
ppmu_data->ppmu[PPMU_DMC0].hw_base = S5P_VA_DMC0;
|
|
ppmu_data->ppmu[PPMU_DMC1].hw_base = S5P_VA_DMC1;
|
|
data->pm_notifier.notifier_call = exynos4_busfreq_pm_notifier_event;
|
|
data->dev = dev;
|
|
mutex_init(&data->lock);
|
|
|
|
switch (data->type) {
|
|
case TYPE_BUSF_EXYNOS4210:
|
|
err = exynos4210_init_tables(data);
|
|
break;
|
|
case TYPE_BUSF_EXYNOS4x12:
|
|
err = exynos4x12_init_tables(data);
|
|
break;
|
|
default:
|
|
dev_err(dev, "Cannot determine the device id %d\n", data->type);
|
|
err = -EINVAL;
|
|
}
|
|
if (err) {
|
|
dev_err(dev, "Cannot initialize busfreq table %d\n",
|
|
data->type);
|
|
return err;
|
|
}
|
|
|
|
data->vdd_int = devm_regulator_get(dev, "vdd_int");
|
|
if (IS_ERR(data->vdd_int)) {
|
|
dev_err(dev, "Cannot get the regulator \"vdd_int\"\n");
|
|
return PTR_ERR(data->vdd_int);
|
|
}
|
|
if (data->type == TYPE_BUSF_EXYNOS4x12) {
|
|
data->vdd_mif = devm_regulator_get(dev, "vdd_mif");
|
|
if (IS_ERR(data->vdd_mif)) {
|
|
dev_err(dev, "Cannot get the regulator \"vdd_mif\"\n");
|
|
return PTR_ERR(data->vdd_mif);
|
|
}
|
|
}
|
|
|
|
rcu_read_lock();
|
|
opp = dev_pm_opp_find_freq_floor(dev,
|
|
&exynos4_devfreq_profile.initial_freq);
|
|
if (IS_ERR(opp)) {
|
|
rcu_read_unlock();
|
|
dev_err(dev, "Invalid initial frequency %lu kHz.\n",
|
|
exynos4_devfreq_profile.initial_freq);
|
|
return PTR_ERR(opp);
|
|
}
|
|
data->curr_oppinfo.rate = dev_pm_opp_get_freq(opp);
|
|
data->curr_oppinfo.volt = dev_pm_opp_get_voltage(opp);
|
|
rcu_read_unlock();
|
|
|
|
platform_set_drvdata(pdev, data);
|
|
|
|
data->devfreq = devm_devfreq_add_device(dev, &exynos4_devfreq_profile,
|
|
"simple_ondemand", NULL);
|
|
if (IS_ERR(data->devfreq))
|
|
return PTR_ERR(data->devfreq);
|
|
|
|
/*
|
|
* Start PPMU (Performance Profiling Monitoring Unit) to check
|
|
* utilization of each IP in the Exynos4 SoC.
|
|
*/
|
|
busfreq_mon_reset(ppmu_data);
|
|
|
|
/* Register opp_notifier for Exynos4 busfreq */
|
|
err = devm_devfreq_register_opp_notifier(dev, data->devfreq);
|
|
if (err < 0) {
|
|
dev_err(dev, "Failed to register opp notifier\n");
|
|
return err;
|
|
}
|
|
|
|
/* Register pm_notifier for Exynos4 busfreq */
|
|
err = register_pm_notifier(&data->pm_notifier);
|
|
if (err) {
|
|
dev_err(dev, "Failed to setup pm notifier\n");
|
|
return err;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int exynos4_busfreq_remove(struct platform_device *pdev)
|
|
{
|
|
struct busfreq_data *data = platform_get_drvdata(pdev);
|
|
|
|
/* Unregister all of notifier chain */
|
|
unregister_pm_notifier(&data->pm_notifier);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_PM_SLEEP
|
|
static int exynos4_busfreq_resume(struct device *dev)
|
|
{
|
|
struct busfreq_data *data = dev_get_drvdata(dev);
|
|
struct busfreq_ppmu_data *ppmu_data = &data->ppmu_data;
|
|
|
|
busfreq_mon_reset(ppmu_data);
|
|
return 0;
|
|
}
|
|
#endif
|
|
|
|
static SIMPLE_DEV_PM_OPS(exynos4_busfreq_pm_ops, NULL, exynos4_busfreq_resume);
|
|
|
|
static const struct platform_device_id exynos4_busfreq_id[] = {
|
|
{ "exynos4210-busfreq", TYPE_BUSF_EXYNOS4210 },
|
|
{ "exynos4412-busfreq", TYPE_BUSF_EXYNOS4x12 },
|
|
{ "exynos4212-busfreq", TYPE_BUSF_EXYNOS4x12 },
|
|
{ },
|
|
};
|
|
|
|
static struct platform_driver exynos4_busfreq_driver = {
|
|
.probe = exynos4_busfreq_probe,
|
|
.remove = exynos4_busfreq_remove,
|
|
.id_table = exynos4_busfreq_id,
|
|
.driver = {
|
|
.name = "exynos4-busfreq",
|
|
.pm = &exynos4_busfreq_pm_ops,
|
|
},
|
|
};
|
|
|
|
static int __init exynos4_busfreq_init(void)
|
|
{
|
|
return platform_driver_register(&exynos4_busfreq_driver);
|
|
}
|
|
late_initcall(exynos4_busfreq_init);
|
|
|
|
static void __exit exynos4_busfreq_exit(void)
|
|
{
|
|
platform_driver_unregister(&exynos4_busfreq_driver);
|
|
}
|
|
module_exit(exynos4_busfreq_exit);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DESCRIPTION("EXYNOS4 busfreq driver with devfreq framework");
|
|
MODULE_AUTHOR("MyungJoo Ham <myungjoo.ham@samsung.com>");
|