1199 lines
40 KiB
C
1199 lines
40 KiB
C
/*
|
|
* This is the Fusion MPT base driver providing common API layer interface
|
|
* for access to MPT (Message Passing Technology) firmware.
|
|
*
|
|
* This code is based on drivers/scsi/mpt2sas/mpt2_base.h
|
|
* Copyright (C) 2007-2014 LSI Corporation
|
|
* Copyright (C) 20013-2014 Avago Technologies
|
|
* (mailto: MPT-FusionLinux.pdl@avagotech.com)
|
|
*
|
|
* This program is free software; you can redistribute it and/or
|
|
* modify it under the terms of the GNU General Public License
|
|
* as published by the Free Software Foundation; either version 2
|
|
* of the License, or (at your option) any later version.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* NO WARRANTY
|
|
* THE PROGRAM IS PROVIDED ON AN "AS IS" BASIS, WITHOUT WARRANTIES OR
|
|
* CONDITIONS OF ANY KIND, EITHER EXPRESS OR IMPLIED INCLUDING, WITHOUT
|
|
* LIMITATION, ANY WARRANTIES OR CONDITIONS OF TITLE, NON-INFRINGEMENT,
|
|
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Each Recipient is
|
|
* solely responsible for determining the appropriateness of using and
|
|
* distributing the Program and assumes all risks associated with its
|
|
* exercise of rights under this Agreement, including but not limited to
|
|
* the risks and costs of program errors, damage to or loss of data,
|
|
* programs or equipment, and unavailability or interruption of operations.
|
|
|
|
* DISCLAIMER OF LIABILITY
|
|
* NEITHER RECIPIENT NOR ANY CONTRIBUTORS SHALL HAVE ANY LIABILITY FOR ANY
|
|
* DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
|
* DAMAGES (INCLUDING WITHOUT LIMITATION LOST PROFITS), HOWEVER CAUSED AND
|
|
* ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
|
|
* TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
|
|
* USE OR DISTRIBUTION OF THE PROGRAM OR THE EXERCISE OF ANY RIGHTS GRANTED
|
|
* HEREUNDER, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
|
|
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, write to the Free Software
|
|
* Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301,
|
|
* USA.
|
|
*/
|
|
|
|
#ifndef MPT2SAS_BASE_H_INCLUDED
|
|
#define MPT2SAS_BASE_H_INCLUDED
|
|
|
|
#include "mpi/mpi2_type.h"
|
|
#include "mpi/mpi2.h"
|
|
#include "mpi/mpi2_ioc.h"
|
|
#include "mpi/mpi2_cnfg.h"
|
|
#include "mpi/mpi2_init.h"
|
|
#include "mpi/mpi2_raid.h"
|
|
#include "mpi/mpi2_tool.h"
|
|
#include "mpi/mpi2_sas.h"
|
|
|
|
#include <scsi/scsi.h>
|
|
#include <scsi/scsi_cmnd.h>
|
|
#include <scsi/scsi_device.h>
|
|
#include <scsi/scsi_host.h>
|
|
#include <scsi/scsi_tcq.h>
|
|
#include <scsi/scsi_transport_sas.h>
|
|
#include <scsi/scsi_dbg.h>
|
|
#include <scsi/scsi_eh.h>
|
|
|
|
#include "mpt2sas_debug.h"
|
|
|
|
/* driver versioning info */
|
|
#define MPT2SAS_DRIVER_NAME "mpt2sas"
|
|
#define MPT2SAS_AUTHOR "Avago Technologies <MPT-FusionLinux.pdl@avagotech.com>"
|
|
#define MPT2SAS_DESCRIPTION "LSI MPT Fusion SAS 2.0 Device Driver"
|
|
#define MPT2SAS_DRIVER_VERSION "20.100.00.00"
|
|
#define MPT2SAS_MAJOR_VERSION 20
|
|
#define MPT2SAS_MINOR_VERSION 100
|
|
#define MPT2SAS_BUILD_VERSION 00
|
|
#define MPT2SAS_RELEASE_VERSION 00
|
|
|
|
/*
|
|
* Set MPT2SAS_SG_DEPTH value based on user input.
|
|
*/
|
|
#ifdef CONFIG_SCSI_MPT2SAS_MAX_SGE
|
|
#if CONFIG_SCSI_MPT2SAS_MAX_SGE < 16
|
|
#define MPT2SAS_SG_DEPTH 16
|
|
#elif CONFIG_SCSI_MPT2SAS_MAX_SGE > 128
|
|
#define MPT2SAS_SG_DEPTH 128
|
|
#else
|
|
#define MPT2SAS_SG_DEPTH CONFIG_SCSI_MPT2SAS_MAX_SGE
|
|
#endif
|
|
#else
|
|
#define MPT2SAS_SG_DEPTH 128 /* MAX_HW_SEGMENTS */
|
|
#endif
|
|
|
|
|
|
/*
|
|
* Generic Defines
|
|
*/
|
|
#define MPT2SAS_SATA_QUEUE_DEPTH 32
|
|
#define MPT2SAS_SAS_QUEUE_DEPTH 254
|
|
#define MPT2SAS_RAID_QUEUE_DEPTH 128
|
|
|
|
#define MPT_NAME_LENGTH 32 /* generic length of strings */
|
|
#define MPT_STRING_LENGTH 64
|
|
|
|
#define MPT_MAX_CALLBACKS 16
|
|
|
|
|
|
#define CAN_SLEEP 1
|
|
#define NO_SLEEP 0
|
|
|
|
#define INTERNAL_CMDS_COUNT 10 /* reserved cmds */
|
|
|
|
#define MPI2_HIM_MASK 0xFFFFFFFF /* mask every bit*/
|
|
|
|
#define MPT2SAS_INVALID_DEVICE_HANDLE 0xFFFF
|
|
|
|
|
|
/*
|
|
* reset phases
|
|
*/
|
|
#define MPT2_IOC_PRE_RESET 1 /* prior to host reset */
|
|
#define MPT2_IOC_AFTER_RESET 2 /* just after host reset */
|
|
#define MPT2_IOC_DONE_RESET 3 /* links re-initialized */
|
|
|
|
/*
|
|
* logging format
|
|
*/
|
|
#define MPT2SAS_FMT "%s: "
|
|
#define MPT2SAS_INFO_FMT KERN_INFO MPT2SAS_FMT
|
|
#define MPT2SAS_NOTE_FMT KERN_NOTICE MPT2SAS_FMT
|
|
#define MPT2SAS_WARN_FMT KERN_WARNING MPT2SAS_FMT
|
|
#define MPT2SAS_ERR_FMT KERN_ERR MPT2SAS_FMT
|
|
|
|
/*
|
|
* Dell HBA branding
|
|
*/
|
|
#define MPT2SAS_DELL_BRANDING_SIZE 32
|
|
|
|
#define MPT2SAS_DELL_6GBPS_SAS_HBA_BRANDING "Dell 6Gbps SAS HBA"
|
|
#define MPT2SAS_DELL_PERC_H200_ADAPTER_BRANDING "Dell PERC H200 Adapter"
|
|
#define MPT2SAS_DELL_PERC_H200_INTEGRATED_BRANDING "Dell PERC H200 Integrated"
|
|
#define MPT2SAS_DELL_PERC_H200_MODULAR_BRANDING "Dell PERC H200 Modular"
|
|
#define MPT2SAS_DELL_PERC_H200_EMBEDDED_BRANDING "Dell PERC H200 Embedded"
|
|
#define MPT2SAS_DELL_PERC_H200_BRANDING "Dell PERC H200"
|
|
#define MPT2SAS_DELL_6GBPS_SAS_BRANDING "Dell 6Gbps SAS"
|
|
|
|
/*
|
|
* Dell HBA SSDIDs
|
|
*/
|
|
#define MPT2SAS_DELL_6GBPS_SAS_HBA_SSDID 0x1F1C
|
|
#define MPT2SAS_DELL_PERC_H200_ADAPTER_SSDID 0x1F1D
|
|
#define MPT2SAS_DELL_PERC_H200_INTEGRATED_SSDID 0x1F1E
|
|
#define MPT2SAS_DELL_PERC_H200_MODULAR_SSDID 0x1F1F
|
|
#define MPT2SAS_DELL_PERC_H200_EMBEDDED_SSDID 0x1F20
|
|
#define MPT2SAS_DELL_PERC_H200_SSDID 0x1F21
|
|
#define MPT2SAS_DELL_6GBPS_SAS_SSDID 0x1F22
|
|
|
|
/*
|
|
* Intel HBA branding
|
|
*/
|
|
#define MPT2SAS_INTEL_RMS25JB080_BRANDING \
|
|
"Intel(R) Integrated RAID Module RMS25JB080"
|
|
#define MPT2SAS_INTEL_RMS25JB040_BRANDING \
|
|
"Intel(R) Integrated RAID Module RMS25JB040"
|
|
#define MPT2SAS_INTEL_RMS25KB080_BRANDING \
|
|
"Intel(R) Integrated RAID Module RMS25KB080"
|
|
#define MPT2SAS_INTEL_RMS25KB040_BRANDING \
|
|
"Intel(R) Integrated RAID Module RMS25KB040"
|
|
#define MPT2SAS_INTEL_RMS25LB040_BRANDING \
|
|
"Intel(R) Integrated RAID Module RMS25LB040"
|
|
#define MPT2SAS_INTEL_RMS25LB080_BRANDING \
|
|
"Intel(R) Integrated RAID Module RMS25LB080"
|
|
#define MPT2SAS_INTEL_RMS2LL080_BRANDING \
|
|
"Intel Integrated RAID Module RMS2LL080"
|
|
#define MPT2SAS_INTEL_RMS2LL040_BRANDING \
|
|
"Intel Integrated RAID Module RMS2LL040"
|
|
#define MPT2SAS_INTEL_RS25GB008_BRANDING \
|
|
"Intel(R) RAID Controller RS25GB008"
|
|
#define MPT2SAS_INTEL_SSD910_BRANDING \
|
|
"Intel(R) SSD 910 Series"
|
|
/*
|
|
* Intel HBA SSDIDs
|
|
*/
|
|
#define MPT2SAS_INTEL_RMS25JB080_SSDID 0x3516
|
|
#define MPT2SAS_INTEL_RMS25JB040_SSDID 0x3517
|
|
#define MPT2SAS_INTEL_RMS25KB080_SSDID 0x3518
|
|
#define MPT2SAS_INTEL_RMS25KB040_SSDID 0x3519
|
|
#define MPT2SAS_INTEL_RMS25LB040_SSDID 0x351A
|
|
#define MPT2SAS_INTEL_RMS25LB080_SSDID 0x351B
|
|
#define MPT2SAS_INTEL_RMS2LL080_SSDID 0x350E
|
|
#define MPT2SAS_INTEL_RMS2LL040_SSDID 0x350F
|
|
#define MPT2SAS_INTEL_RS25GB008_SSDID 0x3000
|
|
#define MPT2SAS_INTEL_SSD910_SSDID 0x3700
|
|
|
|
/*
|
|
* HP HBA branding
|
|
*/
|
|
#define MPT2SAS_HP_3PAR_SSVID 0x1590
|
|
#define MPT2SAS_HP_2_4_INTERNAL_BRANDING "HP H220 Host Bus Adapter"
|
|
#define MPT2SAS_HP_2_4_EXTERNAL_BRANDING "HP H221 Host Bus Adapter"
|
|
#define MPT2SAS_HP_1_4_INTERNAL_1_4_EXTERNAL_BRANDING "HP H222 Host Bus Adapter"
|
|
#define MPT2SAS_HP_EMBEDDED_2_4_INTERNAL_BRANDING "HP H220i Host Bus Adapter"
|
|
#define MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_BRANDING "HP H210i Host Bus Adapter"
|
|
|
|
/*
|
|
* HO HBA SSDIDs
|
|
*/
|
|
#define MPT2SAS_HP_2_4_INTERNAL_SSDID 0x0041
|
|
#define MPT2SAS_HP_2_4_EXTERNAL_SSDID 0x0042
|
|
#define MPT2SAS_HP_1_4_INTERNAL_1_4_EXTERNAL_SSDID 0x0043
|
|
#define MPT2SAS_HP_EMBEDDED_2_4_INTERNAL_SSDID 0x0044
|
|
#define MPT2SAS_HP_DAUGHTER_2_4_INTERNAL_SSDID 0x0046
|
|
|
|
/*
|
|
* WarpDrive Specific Log codes
|
|
*/
|
|
|
|
#define MPT2_WARPDRIVE_LOGENTRY (0x8002)
|
|
#define MPT2_WARPDRIVE_LC_SSDT (0x41)
|
|
#define MPT2_WARPDRIVE_LC_SSDLW (0x43)
|
|
#define MPT2_WARPDRIVE_LC_SSDLF (0x44)
|
|
#define MPT2_WARPDRIVE_LC_BRMF (0x4D)
|
|
|
|
/*
|
|
* per target private data
|
|
*/
|
|
#define MPT_TARGET_FLAGS_RAID_COMPONENT 0x01
|
|
#define MPT_TARGET_FLAGS_VOLUME 0x02
|
|
#define MPT_TARGET_FLAGS_DELETED 0x04
|
|
|
|
/**
|
|
* struct MPT2SAS_TARGET - starget private hostdata
|
|
* @starget: starget object
|
|
* @sas_address: target sas address
|
|
* @raid_device: raid_device pointer to access volume data
|
|
* @handle: device handle
|
|
* @num_luns: number luns
|
|
* @flags: MPT_TARGET_FLAGS_XXX flags
|
|
* @deleted: target flaged for deletion
|
|
* @tm_busy: target is busy with TM request.
|
|
*/
|
|
struct MPT2SAS_TARGET {
|
|
struct scsi_target *starget;
|
|
u64 sas_address;
|
|
struct _raid_device *raid_device;
|
|
u16 handle;
|
|
int num_luns;
|
|
u32 flags;
|
|
u8 deleted;
|
|
u8 tm_busy;
|
|
};
|
|
|
|
|
|
/*
|
|
* per device private data
|
|
*/
|
|
#define MPT_DEVICE_FLAGS_INIT 0x01
|
|
#define MPT_DEVICE_TLR_ON 0x02
|
|
|
|
/**
|
|
* struct MPT2SAS_DEVICE - sdev private hostdata
|
|
* @sas_target: starget private hostdata
|
|
* @lun: lun number
|
|
* @flags: MPT_DEVICE_XXX flags
|
|
* @configured_lun: lun is configured
|
|
* @block: device is in SDEV_BLOCK state
|
|
* @tlr_snoop_check: flag used in determining whether to disable TLR
|
|
*/
|
|
|
|
/* OEM Identifiers */
|
|
#define MFG10_OEM_ID_INVALID (0x00000000)
|
|
#define MFG10_OEM_ID_DELL (0x00000001)
|
|
#define MFG10_OEM_ID_FSC (0x00000002)
|
|
#define MFG10_OEM_ID_SUN (0x00000003)
|
|
#define MFG10_OEM_ID_IBM (0x00000004)
|
|
|
|
/* GENERIC Flags 0*/
|
|
#define MFG10_GF0_OCE_DISABLED (0x00000001)
|
|
#define MFG10_GF0_R1E_DRIVE_COUNT (0x00000002)
|
|
#define MFG10_GF0_R10_DISPLAY (0x00000004)
|
|
#define MFG10_GF0_SSD_DATA_SCRUB_DISABLE (0x00000008)
|
|
#define MFG10_GF0_SINGLE_DRIVE_R0 (0x00000010)
|
|
|
|
/* OEM Specific Flags will come from OEM specific header files */
|
|
typedef struct _MPI2_CONFIG_PAGE_MAN_10 {
|
|
MPI2_CONFIG_PAGE_HEADER Header; /* 00h */
|
|
U8 OEMIdentifier; /* 04h */
|
|
U8 Reserved1; /* 05h */
|
|
U16 Reserved2; /* 08h */
|
|
U32 Reserved3; /* 0Ch */
|
|
U32 GenericFlags0; /* 10h */
|
|
U32 GenericFlags1; /* 14h */
|
|
U32 Reserved4; /* 18h */
|
|
U32 OEMSpecificFlags0; /* 1Ch */
|
|
U32 OEMSpecificFlags1; /* 20h */
|
|
U32 Reserved5[18]; /* 24h-60h*/
|
|
} MPI2_CONFIG_PAGE_MAN_10,
|
|
MPI2_POINTER PTR_MPI2_CONFIG_PAGE_MAN_10,
|
|
Mpi2ManufacturingPage10_t, MPI2_POINTER pMpi2ManufacturingPage10_t;
|
|
|
|
#define MFG_PAGE10_HIDE_SSDS_MASK (0x00000003)
|
|
#define MFG_PAGE10_HIDE_ALL_DISKS (0x00)
|
|
#define MFG_PAGE10_EXPOSE_ALL_DISKS (0x01)
|
|
#define MFG_PAGE10_HIDE_IF_VOL_PRESENT (0x02)
|
|
|
|
|
|
struct MPT2SAS_DEVICE {
|
|
struct MPT2SAS_TARGET *sas_target;
|
|
unsigned int lun;
|
|
u32 flags;
|
|
u8 configured_lun;
|
|
u8 block;
|
|
u8 tlr_snoop_check;
|
|
};
|
|
|
|
#define MPT2_CMD_NOT_USED 0x8000 /* free */
|
|
#define MPT2_CMD_COMPLETE 0x0001 /* completed */
|
|
#define MPT2_CMD_PENDING 0x0002 /* pending */
|
|
#define MPT2_CMD_REPLY_VALID 0x0004 /* reply is valid */
|
|
#define MPT2_CMD_RESET 0x0008 /* host reset dropped the command */
|
|
|
|
/**
|
|
* struct _internal_cmd - internal commands struct
|
|
* @mutex: mutex
|
|
* @done: completion
|
|
* @reply: reply message pointer
|
|
* @sense: sense data
|
|
* @status: MPT2_CMD_XXX status
|
|
* @smid: system message id
|
|
*/
|
|
struct _internal_cmd {
|
|
struct mutex mutex;
|
|
struct completion done;
|
|
void *reply;
|
|
void *sense;
|
|
u16 status;
|
|
u16 smid;
|
|
};
|
|
|
|
|
|
/**
|
|
* struct _sas_device - attached device information
|
|
* @list: sas device list
|
|
* @starget: starget object
|
|
* @sas_address: device sas address
|
|
* @device_name: retrieved from the SAS IDENTIFY frame.
|
|
* @handle: device handle
|
|
* @sas_address_parent: sas address of parent expander or sas host
|
|
* @enclosure_handle: enclosure handle
|
|
* @enclosure_logical_id: enclosure logical identifier
|
|
* @volume_handle: volume handle (valid when hidden raid member)
|
|
* @volume_wwid: volume unique identifier
|
|
* @device_info: bitfield provides detailed info about the device
|
|
* @id: target id
|
|
* @channel: target channel
|
|
* @slot: number number
|
|
* @phy: phy identifier provided in sas device page 0
|
|
* @responding: used in _scsih_sas_device_mark_responding
|
|
* @pfa_led_on: flag for PFA LED status
|
|
*/
|
|
struct _sas_device {
|
|
struct list_head list;
|
|
struct scsi_target *starget;
|
|
u64 sas_address;
|
|
u64 device_name;
|
|
u16 handle;
|
|
u64 sas_address_parent;
|
|
u16 enclosure_handle;
|
|
u64 enclosure_logical_id;
|
|
u16 volume_handle;
|
|
u64 volume_wwid;
|
|
u32 device_info;
|
|
int id;
|
|
int channel;
|
|
u16 slot;
|
|
u8 phy;
|
|
u8 responding;
|
|
u8 pfa_led_on;
|
|
};
|
|
|
|
/**
|
|
* struct _raid_device - raid volume link list
|
|
* @list: sas device list
|
|
* @starget: starget object
|
|
* @sdev: scsi device struct (volumes are single lun)
|
|
* @wwid: unique identifier for the volume
|
|
* @handle: device handle
|
|
* @block_size: Block size of the volume
|
|
* @id: target id
|
|
* @channel: target channel
|
|
* @volume_type: the raid level
|
|
* @device_info: bitfield provides detailed info about the hidden components
|
|
* @num_pds: number of hidden raid components
|
|
* @responding: used in _scsih_raid_device_mark_responding
|
|
* @percent_complete: resync percent complete
|
|
* @direct_io_enabled: Whether direct io to PDs are allowed or not
|
|
* @stripe_exponent: X where 2powX is the stripe sz in blocks
|
|
* @block_exponent: X where 2powX is the block sz in bytes
|
|
* @max_lba: Maximum number of LBA in the volume
|
|
* @stripe_sz: Stripe Size of the volume
|
|
* @device_info: Device info of the volume member disk
|
|
* @pd_handle: Array of handles of the physical drives for direct I/O in le16
|
|
*/
|
|
#define MPT_MAX_WARPDRIVE_PDS 8
|
|
struct _raid_device {
|
|
struct list_head list;
|
|
struct scsi_target *starget;
|
|
struct scsi_device *sdev;
|
|
u64 wwid;
|
|
u16 handle;
|
|
u16 block_sz;
|
|
int id;
|
|
int channel;
|
|
u8 volume_type;
|
|
u8 num_pds;
|
|
u8 responding;
|
|
u8 percent_complete;
|
|
u8 direct_io_enabled;
|
|
u8 stripe_exponent;
|
|
u8 block_exponent;
|
|
u64 max_lba;
|
|
u32 stripe_sz;
|
|
u32 device_info;
|
|
u16 pd_handle[MPT_MAX_WARPDRIVE_PDS];
|
|
};
|
|
|
|
/**
|
|
* struct _boot_device - boot device info
|
|
* @is_raid: flag to indicate whether this is volume
|
|
* @device: holds pointer for either struct _sas_device or
|
|
* struct _raid_device
|
|
*/
|
|
struct _boot_device {
|
|
u8 is_raid;
|
|
void *device;
|
|
};
|
|
|
|
/**
|
|
* struct _sas_port - wide/narrow sas port information
|
|
* @port_list: list of ports belonging to expander
|
|
* @num_phys: number of phys belonging to this port
|
|
* @remote_identify: attached device identification
|
|
* @rphy: sas transport rphy object
|
|
* @port: sas transport wide/narrow port object
|
|
* @phy_list: _sas_phy list objects belonging to this port
|
|
*/
|
|
struct _sas_port {
|
|
struct list_head port_list;
|
|
u8 num_phys;
|
|
struct sas_identify remote_identify;
|
|
struct sas_rphy *rphy;
|
|
struct sas_port *port;
|
|
struct list_head phy_list;
|
|
};
|
|
|
|
/**
|
|
* struct _sas_phy - phy information
|
|
* @port_siblings: list of phys belonging to a port
|
|
* @identify: phy identification
|
|
* @remote_identify: attached device identification
|
|
* @phy: sas transport phy object
|
|
* @phy_id: unique phy id
|
|
* @handle: device handle for this phy
|
|
* @attached_handle: device handle for attached device
|
|
* @phy_belongs_to_port: port has been created for this phy
|
|
*/
|
|
struct _sas_phy {
|
|
struct list_head port_siblings;
|
|
struct sas_identify identify;
|
|
struct sas_identify remote_identify;
|
|
struct sas_phy *phy;
|
|
u8 phy_id;
|
|
u16 handle;
|
|
u16 attached_handle;
|
|
u8 phy_belongs_to_port;
|
|
};
|
|
|
|
/**
|
|
* struct _sas_node - sas_host/expander information
|
|
* @list: list of expanders
|
|
* @parent_dev: parent device class
|
|
* @num_phys: number phys belonging to this sas_host/expander
|
|
* @sas_address: sas address of this sas_host/expander
|
|
* @handle: handle for this sas_host/expander
|
|
* @sas_address_parent: sas address of parent expander or sas host
|
|
* @enclosure_handle: handle for this a member of an enclosure
|
|
* @device_info: bitwise defining capabilities of this sas_host/expander
|
|
* @responding: used in _scsih_expander_device_mark_responding
|
|
* @phy: a list of phys that make up this sas_host/expander
|
|
* @sas_port_list: list of ports attached to this sas_host/expander
|
|
*/
|
|
struct _sas_node {
|
|
struct list_head list;
|
|
struct device *parent_dev;
|
|
u8 num_phys;
|
|
u64 sas_address;
|
|
u16 handle;
|
|
u64 sas_address_parent;
|
|
u16 enclosure_handle;
|
|
u64 enclosure_logical_id;
|
|
u8 responding;
|
|
struct _sas_phy *phy;
|
|
struct list_head sas_port_list;
|
|
};
|
|
|
|
/**
|
|
* enum reset_type - reset state
|
|
* @FORCE_BIG_HAMMER: issue diagnostic reset
|
|
* @SOFT_RESET: issue message_unit_reset, if fails to to big hammer
|
|
*/
|
|
enum reset_type {
|
|
FORCE_BIG_HAMMER,
|
|
SOFT_RESET,
|
|
};
|
|
|
|
/**
|
|
* struct chain_tracker - firmware chain tracker
|
|
* @chain_buffer: chain buffer
|
|
* @chain_buffer_dma: physical address
|
|
* @tracker_list: list of free request (ioc->free_chain_list)
|
|
*/
|
|
struct chain_tracker {
|
|
void *chain_buffer;
|
|
dma_addr_t chain_buffer_dma;
|
|
struct list_head tracker_list;
|
|
};
|
|
|
|
/**
|
|
* struct scsiio_tracker - scsi mf request tracker
|
|
* @smid: system message id
|
|
* @scmd: scsi request pointer
|
|
* @cb_idx: callback index
|
|
* @direct_io: To indicate whether I/O is direct (WARPDRIVE)
|
|
* @chain_list: list of chains associated to this IO
|
|
* @tracker_list: list of free request (ioc->free_list)
|
|
*/
|
|
struct scsiio_tracker {
|
|
u16 smid;
|
|
struct scsi_cmnd *scmd;
|
|
u8 cb_idx;
|
|
u8 direct_io;
|
|
struct list_head chain_list;
|
|
struct list_head tracker_list;
|
|
};
|
|
|
|
/**
|
|
* struct request_tracker - firmware request tracker
|
|
* @smid: system message id
|
|
* @cb_idx: callback index
|
|
* @tracker_list: list of free request (ioc->free_list)
|
|
*/
|
|
struct request_tracker {
|
|
u16 smid;
|
|
u8 cb_idx;
|
|
struct list_head tracker_list;
|
|
};
|
|
|
|
/**
|
|
* struct _tr_list - target reset list
|
|
* @handle: device handle
|
|
* @state: state machine
|
|
*/
|
|
struct _tr_list {
|
|
struct list_head list;
|
|
u16 handle;
|
|
u16 state;
|
|
};
|
|
|
|
typedef void (*MPT_ADD_SGE)(void *paddr, u32 flags_length, dma_addr_t dma_addr);
|
|
|
|
/**
|
|
* struct adapter_reply_queue - the reply queue struct
|
|
* @ioc: per adapter object
|
|
* @msix_index: msix index into vector table
|
|
* @vector: irq vector
|
|
* @reply_post_host_index: head index in the pool where FW completes IO
|
|
* @reply_post_free: reply post base virt address
|
|
* @name: the name registered to request_irq()
|
|
* @busy: isr is actively processing replies on another cpu
|
|
* @list: this list
|
|
*/
|
|
struct adapter_reply_queue {
|
|
struct MPT2SAS_ADAPTER *ioc;
|
|
u8 msix_index;
|
|
unsigned int vector;
|
|
u32 reply_post_host_index;
|
|
Mpi2ReplyDescriptorsUnion_t *reply_post_free;
|
|
char name[MPT_NAME_LENGTH];
|
|
atomic_t busy;
|
|
cpumask_var_t affinity_hint;
|
|
struct list_head list;
|
|
};
|
|
|
|
/* IOC Facts and Port Facts converted from little endian to cpu */
|
|
union mpi2_version_union {
|
|
MPI2_VERSION_STRUCT Struct;
|
|
u32 Word;
|
|
};
|
|
|
|
struct mpt2sas_facts {
|
|
u16 MsgVersion;
|
|
u16 HeaderVersion;
|
|
u8 IOCNumber;
|
|
u8 VP_ID;
|
|
u8 VF_ID;
|
|
u16 IOCExceptions;
|
|
u16 IOCStatus;
|
|
u32 IOCLogInfo;
|
|
u8 MaxChainDepth;
|
|
u8 WhoInit;
|
|
u8 NumberOfPorts;
|
|
u8 MaxMSIxVectors;
|
|
u16 RequestCredit;
|
|
u16 ProductID;
|
|
u32 IOCCapabilities;
|
|
union mpi2_version_union FWVersion;
|
|
u16 IOCRequestFrameSize;
|
|
u16 Reserved3;
|
|
u16 MaxInitiators;
|
|
u16 MaxTargets;
|
|
u16 MaxSasExpanders;
|
|
u16 MaxEnclosures;
|
|
u16 ProtocolFlags;
|
|
u16 HighPriorityCredit;
|
|
u16 MaxReplyDescriptorPostQueueDepth;
|
|
u8 ReplyFrameSize;
|
|
u8 MaxVolumes;
|
|
u16 MaxDevHandle;
|
|
u16 MaxPersistentEntries;
|
|
u16 MinDevHandle;
|
|
};
|
|
|
|
struct mpt2sas_port_facts {
|
|
u8 PortNumber;
|
|
u8 VP_ID;
|
|
u8 VF_ID;
|
|
u8 PortType;
|
|
u16 MaxPostedCmdBuffers;
|
|
};
|
|
|
|
struct reply_post_struct {
|
|
Mpi2ReplyDescriptorsUnion_t *reply_post_free;
|
|
dma_addr_t reply_post_free_dma;
|
|
};
|
|
|
|
/**
|
|
* enum mutex_type - task management mutex type
|
|
* @TM_MUTEX_OFF: mutex is not required becuase calling function is acquiring it
|
|
* @TM_MUTEX_ON: mutex is required
|
|
*/
|
|
enum mutex_type {
|
|
TM_MUTEX_OFF = 0,
|
|
TM_MUTEX_ON = 1,
|
|
};
|
|
|
|
typedef void (*MPT2SAS_FLUSH_RUNNING_CMDS)(struct MPT2SAS_ADAPTER *ioc);
|
|
/**
|
|
* struct MPT2SAS_ADAPTER - per adapter struct
|
|
* @list: ioc_list
|
|
* @shost: shost object
|
|
* @id: unique adapter id
|
|
* @cpu_count: number online cpus
|
|
* @name: generic ioc string
|
|
* @tmp_string: tmp string used for logging
|
|
* @pdev: pci pdev object
|
|
* @chip: memory mapped register space
|
|
* @chip_phys: physical addrss prior to mapping
|
|
* @logging_level: see mpt2sas_debug.h
|
|
* @fwfault_debug: debuging FW timeouts
|
|
* @ir_firmware: IR firmware present
|
|
* @bars: bitmask of BAR's that must be configured
|
|
* @mask_interrupts: ignore interrupt
|
|
* @dma_mask: used to set the consistent dma mask
|
|
* @fault_reset_work_q_name: fw fault work queue
|
|
* @fault_reset_work_q: ""
|
|
* @fault_reset_work: ""
|
|
* @firmware_event_name: fw event work queue
|
|
* @firmware_event_thread: ""
|
|
* @fw_events_off: flag to turn off fw event handling
|
|
* @fw_event_lock:
|
|
* @fw_event_list: list of fw events
|
|
* @aen_event_read_flag: event log was read
|
|
* @broadcast_aen_busy: broadcast aen waiting to be serviced
|
|
* @shost_recovery: host reset in progress
|
|
* @ioc_reset_in_progress_lock:
|
|
* @ioc_link_reset_in_progress: phy/hard reset in progress
|
|
* @ignore_loginfos: ignore loginfos during task management
|
|
* @remove_host: flag for when driver unloads, to avoid sending dev resets
|
|
* @pci_error_recovery: flag to prevent ioc access until slot reset completes
|
|
* @wait_for_discovery_to_complete: flag set at driver load time when
|
|
* waiting on reporting devices
|
|
* @is_driver_loading: flag set at driver load time
|
|
* @port_enable_failed: flag set when port enable has failed
|
|
* @start_scan: flag set from scan_start callback, cleared from _mpt2sas_fw_work
|
|
* @start_scan_failed: means port enable failed, return's the ioc_status
|
|
* @msix_enable: flag indicating msix is enabled
|
|
* @msix_vector_count: number msix vectors
|
|
* @cpu_msix_table: table for mapping cpus to msix index
|
|
* @cpu_msix_table_sz: table size
|
|
* @schedule_dead_ioc_flush_running_cmds: callback to flush pending commands
|
|
* @scsi_io_cb_idx: shost generated commands
|
|
* @tm_cb_idx: task management commands
|
|
* @scsih_cb_idx: scsih internal commands
|
|
* @transport_cb_idx: transport internal commands
|
|
* @ctl_cb_idx: clt internal commands
|
|
* @base_cb_idx: base internal commands
|
|
* @config_cb_idx: base internal commands
|
|
* @tm_tr_cb_idx : device removal target reset handshake
|
|
* @tm_tr_volume_cb_idx : volume removal target reset
|
|
* @base_cmds:
|
|
* @transport_cmds:
|
|
* @scsih_cmds:
|
|
* @tm_cmds:
|
|
* @ctl_cmds:
|
|
* @config_cmds:
|
|
* @base_add_sg_single: handler for either 32/64 bit sgl's
|
|
* @event_type: bits indicating which events to log
|
|
* @event_context: unique id for each logged event
|
|
* @event_log: event log pointer
|
|
* @event_masks: events that are masked
|
|
* @facts: static facts data
|
|
* @pfacts: static port facts data
|
|
* @manu_pg0: static manufacturing page 0
|
|
* @manu_pg10: static manufacturing page 10
|
|
* @bios_pg2: static bios page 2
|
|
* @bios_pg3: static bios page 3
|
|
* @ioc_pg8: static ioc page 8
|
|
* @iounit_pg0: static iounit page 0
|
|
* @iounit_pg1: static iounit page 1
|
|
* @iounit_pg8: static iounit page 8
|
|
* @sas_hba: sas host object
|
|
* @sas_expander_list: expander object list
|
|
* @sas_node_lock:
|
|
* @sas_device_list: sas device object list
|
|
* @sas_device_init_list: sas device object list (used only at init time)
|
|
* @sas_device_lock:
|
|
* @io_missing_delay: time for IO completed by fw when PDR enabled
|
|
* @device_missing_delay: time for device missing by fw when PDR enabled
|
|
* @sas_id : used for setting volume target IDs
|
|
* @blocking_handles: bitmask used to identify which devices need blocking
|
|
* @pd_handles : bitmask for PD handles
|
|
* @pd_handles_sz : size of pd_handle bitmask
|
|
* @config_page_sz: config page size
|
|
* @config_page: reserve memory for config page payload
|
|
* @config_page_dma:
|
|
* @hba_queue_depth: hba request queue depth
|
|
* @sge_size: sg element size for either 32/64 bit
|
|
* @scsiio_depth: SCSI_IO queue depth
|
|
* @request_sz: per request frame size
|
|
* @request: pool of request frames
|
|
* @request_dma:
|
|
* @request_dma_sz:
|
|
* @scsi_lookup: firmware request tracker list
|
|
* @scsi_lookup_lock:
|
|
* @free_list: free list of request
|
|
* @chain: pool of chains
|
|
* @pending_io_count:
|
|
* @reset_wq:
|
|
* @chain_dma:
|
|
* @max_sges_in_main_message: number sg elements in main message
|
|
* @max_sges_in_chain_message: number sg elements per chain
|
|
* @chains_needed_per_io: max chains per io
|
|
* @chain_offset_value_for_main_message: location 1st sg in main
|
|
* @chain_depth: total chains allocated
|
|
* @hi_priority_smid:
|
|
* @hi_priority:
|
|
* @hi_priority_dma:
|
|
* @hi_priority_depth:
|
|
* @hpr_lookup:
|
|
* @hpr_free_list:
|
|
* @internal_smid:
|
|
* @internal:
|
|
* @internal_dma:
|
|
* @internal_depth:
|
|
* @internal_lookup:
|
|
* @internal_free_list:
|
|
* @sense: pool of sense
|
|
* @sense_dma:
|
|
* @sense_dma_pool:
|
|
* @reply_depth: hba reply queue depth:
|
|
* @reply_sz: per reply frame size:
|
|
* @reply: pool of replys:
|
|
* @reply_dma:
|
|
* @reply_dma_pool:
|
|
* @reply_free_queue_depth: reply free depth
|
|
* @reply_free: pool for reply free queue (32 bit addr)
|
|
* @reply_free_dma:
|
|
* @reply_free_dma_pool:
|
|
* @reply_free_host_index: tail index in pool to insert free replys
|
|
* @reply_post_queue_depth: reply post queue depth
|
|
* @reply_post_struct: struct for reply_post_free physical & virt address
|
|
* @rdpq_array_capable: FW supports multiple reply queue addresses in ioc_init
|
|
* @rdpq_array_enable: rdpq_array support is enabled in the driver
|
|
* @rdpq_array_enable_assigned: this ensures that rdpq_array_enable flag
|
|
* is assigned only ones
|
|
* @reply_queue_count: number of reply queue's
|
|
* @reply_queue_list: link list contaning the reply queue info
|
|
* @reply_post_host_index: head index in the pool where FW completes IO
|
|
* @delayed_tr_list: target reset link list
|
|
* @delayed_tr_volume_list: volume target reset link list
|
|
* @@temp_sensors_count: flag to carry the number of temperature sensors
|
|
*/
|
|
struct MPT2SAS_ADAPTER {
|
|
struct list_head list;
|
|
struct Scsi_Host *shost;
|
|
u8 id;
|
|
int cpu_count;
|
|
char name[MPT_NAME_LENGTH];
|
|
char tmp_string[MPT_STRING_LENGTH];
|
|
struct pci_dev *pdev;
|
|
Mpi2SystemInterfaceRegs_t __iomem *chip;
|
|
resource_size_t chip_phys;
|
|
int logging_level;
|
|
int fwfault_debug;
|
|
u8 ir_firmware;
|
|
int bars;
|
|
u8 mask_interrupts;
|
|
int dma_mask;
|
|
|
|
/* fw fault handler */
|
|
char fault_reset_work_q_name[20];
|
|
struct workqueue_struct *fault_reset_work_q;
|
|
struct delayed_work fault_reset_work;
|
|
|
|
/* fw event handler */
|
|
char firmware_event_name[20];
|
|
struct workqueue_struct *firmware_event_thread;
|
|
spinlock_t fw_event_lock;
|
|
struct list_head fw_event_list;
|
|
|
|
/* misc flags */
|
|
int aen_event_read_flag;
|
|
u8 broadcast_aen_busy;
|
|
u16 broadcast_aen_pending;
|
|
u8 shost_recovery;
|
|
|
|
struct mutex reset_in_progress_mutex;
|
|
spinlock_t ioc_reset_in_progress_lock;
|
|
u8 ioc_link_reset_in_progress;
|
|
u8 ioc_reset_in_progress_status;
|
|
|
|
u8 ignore_loginfos;
|
|
u8 remove_host;
|
|
u8 pci_error_recovery;
|
|
u8 wait_for_discovery_to_complete;
|
|
struct completion port_enable_done;
|
|
u8 is_driver_loading;
|
|
u8 port_enable_failed;
|
|
|
|
u8 start_scan;
|
|
u16 start_scan_failed;
|
|
|
|
u8 msix_enable;
|
|
u16 msix_vector_count;
|
|
u8 *cpu_msix_table;
|
|
resource_size_t __iomem **reply_post_host_index;
|
|
u16 cpu_msix_table_sz;
|
|
u32 ioc_reset_count;
|
|
MPT2SAS_FLUSH_RUNNING_CMDS schedule_dead_ioc_flush_running_cmds;
|
|
u32 non_operational_loop;
|
|
|
|
/* internal commands, callback index */
|
|
u8 scsi_io_cb_idx;
|
|
u8 tm_cb_idx;
|
|
u8 transport_cb_idx;
|
|
u8 scsih_cb_idx;
|
|
u8 ctl_cb_idx;
|
|
u8 base_cb_idx;
|
|
u8 port_enable_cb_idx;
|
|
u8 config_cb_idx;
|
|
u8 tm_tr_cb_idx;
|
|
u8 tm_tr_volume_cb_idx;
|
|
u8 tm_sas_control_cb_idx;
|
|
struct _internal_cmd base_cmds;
|
|
struct _internal_cmd port_enable_cmds;
|
|
struct _internal_cmd transport_cmds;
|
|
struct _internal_cmd scsih_cmds;
|
|
struct _internal_cmd tm_cmds;
|
|
struct _internal_cmd ctl_cmds;
|
|
struct _internal_cmd config_cmds;
|
|
|
|
MPT_ADD_SGE base_add_sg_single;
|
|
|
|
/* event log */
|
|
u32 event_type[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];
|
|
u32 event_context;
|
|
void *event_log;
|
|
u32 event_masks[MPI2_EVENT_NOTIFY_EVENTMASK_WORDS];
|
|
|
|
/* static config pages */
|
|
struct mpt2sas_facts facts;
|
|
struct mpt2sas_port_facts *pfacts;
|
|
Mpi2ManufacturingPage0_t manu_pg0;
|
|
Mpi2BiosPage2_t bios_pg2;
|
|
Mpi2BiosPage3_t bios_pg3;
|
|
Mpi2IOCPage8_t ioc_pg8;
|
|
Mpi2IOUnitPage0_t iounit_pg0;
|
|
Mpi2IOUnitPage1_t iounit_pg1;
|
|
Mpi2IOUnitPage8_t iounit_pg8;
|
|
|
|
struct _boot_device req_boot_device;
|
|
struct _boot_device req_alt_boot_device;
|
|
struct _boot_device current_boot_device;
|
|
|
|
/* sas hba, expander, and device list */
|
|
struct _sas_node sas_hba;
|
|
struct list_head sas_expander_list;
|
|
spinlock_t sas_node_lock;
|
|
struct list_head sas_device_list;
|
|
struct list_head sas_device_init_list;
|
|
spinlock_t sas_device_lock;
|
|
struct list_head raid_device_list;
|
|
spinlock_t raid_device_lock;
|
|
u8 io_missing_delay;
|
|
u16 device_missing_delay;
|
|
int sas_id;
|
|
void *blocking_handles;
|
|
void *pd_handles;
|
|
u16 pd_handles_sz;
|
|
|
|
/* config page */
|
|
u16 config_page_sz;
|
|
void *config_page;
|
|
dma_addr_t config_page_dma;
|
|
|
|
/* scsiio request */
|
|
u16 hba_queue_depth;
|
|
u16 sge_size;
|
|
u16 scsiio_depth;
|
|
u16 request_sz;
|
|
u8 *request;
|
|
dma_addr_t request_dma;
|
|
u32 request_dma_sz;
|
|
struct scsiio_tracker *scsi_lookup;
|
|
ulong scsi_lookup_pages;
|
|
spinlock_t scsi_lookup_lock;
|
|
struct list_head free_list;
|
|
int pending_io_count;
|
|
wait_queue_head_t reset_wq;
|
|
|
|
/* chain */
|
|
struct chain_tracker *chain_lookup;
|
|
struct list_head free_chain_list;
|
|
struct dma_pool *chain_dma_pool;
|
|
ulong chain_pages;
|
|
u16 max_sges_in_main_message;
|
|
u16 max_sges_in_chain_message;
|
|
u16 chains_needed_per_io;
|
|
u16 chain_offset_value_for_main_message;
|
|
u32 chain_depth;
|
|
|
|
/* hi-priority queue */
|
|
u16 hi_priority_smid;
|
|
u8 *hi_priority;
|
|
dma_addr_t hi_priority_dma;
|
|
u16 hi_priority_depth;
|
|
struct request_tracker *hpr_lookup;
|
|
struct list_head hpr_free_list;
|
|
|
|
/* internal queue */
|
|
u16 internal_smid;
|
|
u8 *internal;
|
|
dma_addr_t internal_dma;
|
|
u16 internal_depth;
|
|
struct request_tracker *internal_lookup;
|
|
struct list_head internal_free_list;
|
|
|
|
/* sense */
|
|
u8 *sense;
|
|
dma_addr_t sense_dma;
|
|
struct dma_pool *sense_dma_pool;
|
|
|
|
/* reply */
|
|
u16 reply_sz;
|
|
u8 *reply;
|
|
dma_addr_t reply_dma;
|
|
u32 reply_dma_max_address;
|
|
u32 reply_dma_min_address;
|
|
struct dma_pool *reply_dma_pool;
|
|
|
|
/* reply free queue */
|
|
u16 reply_free_queue_depth;
|
|
__le32 *reply_free;
|
|
dma_addr_t reply_free_dma;
|
|
struct dma_pool *reply_free_dma_pool;
|
|
u32 reply_free_host_index;
|
|
|
|
/* reply post queue */
|
|
u16 reply_post_queue_depth;
|
|
struct reply_post_struct *reply_post;
|
|
u8 rdpq_array_capable;
|
|
u8 rdpq_array_enable;
|
|
u8 rdpq_array_enable_assigned;
|
|
struct dma_pool *reply_post_free_dma_pool;
|
|
u8 reply_queue_count;
|
|
struct list_head reply_queue_list;
|
|
|
|
struct list_head delayed_tr_list;
|
|
struct list_head delayed_tr_volume_list;
|
|
u8 temp_sensors_count;
|
|
|
|
/* diag buffer support */
|
|
u8 *diag_buffer[MPI2_DIAG_BUF_TYPE_COUNT];
|
|
u32 diag_buffer_sz[MPI2_DIAG_BUF_TYPE_COUNT];
|
|
dma_addr_t diag_buffer_dma[MPI2_DIAG_BUF_TYPE_COUNT];
|
|
u8 diag_buffer_status[MPI2_DIAG_BUF_TYPE_COUNT];
|
|
u32 unique_id[MPI2_DIAG_BUF_TYPE_COUNT];
|
|
Mpi2ManufacturingPage10_t manu_pg10;
|
|
u32 product_specific[MPI2_DIAG_BUF_TYPE_COUNT][23];
|
|
u32 diagnostic_flags[MPI2_DIAG_BUF_TYPE_COUNT];
|
|
u32 ring_buffer_offset;
|
|
u32 ring_buffer_sz;
|
|
u8 is_warpdrive;
|
|
u8 hide_ir_msg;
|
|
u8 mfg_pg10_hide_flag;
|
|
u8 hide_drives;
|
|
|
|
};
|
|
|
|
typedef u8 (*MPT_CALLBACK)(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
|
|
u32 reply);
|
|
|
|
|
|
/* base shared API */
|
|
extern struct list_head mpt2sas_ioc_list;
|
|
void mpt2sas_base_start_watchdog(struct MPT2SAS_ADAPTER *ioc);
|
|
void mpt2sas_base_stop_watchdog(struct MPT2SAS_ADAPTER *ioc);
|
|
|
|
int mpt2sas_base_attach(struct MPT2SAS_ADAPTER *ioc);
|
|
void mpt2sas_base_detach(struct MPT2SAS_ADAPTER *ioc);
|
|
int mpt2sas_base_map_resources(struct MPT2SAS_ADAPTER *ioc);
|
|
void mpt2sas_base_free_resources(struct MPT2SAS_ADAPTER *ioc);
|
|
int mpt2sas_base_hard_reset_handler(struct MPT2SAS_ADAPTER *ioc, int sleep_flag,
|
|
enum reset_type type);
|
|
|
|
void *mpt2sas_base_get_msg_frame(struct MPT2SAS_ADAPTER *ioc, u16 smid);
|
|
void *mpt2sas_base_get_sense_buffer(struct MPT2SAS_ADAPTER *ioc, u16 smid);
|
|
void mpt2sas_base_build_zero_len_sge(struct MPT2SAS_ADAPTER *ioc, void *paddr);
|
|
__le32 mpt2sas_base_get_sense_buffer_dma(struct MPT2SAS_ADAPTER *ioc,
|
|
u16 smid);
|
|
void mpt2sas_base_flush_reply_queues(struct MPT2SAS_ADAPTER *ioc);
|
|
|
|
/* hi-priority queue */
|
|
u16 mpt2sas_base_get_smid_hpr(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx);
|
|
u16 mpt2sas_base_get_smid_scsiio(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx,
|
|
struct scsi_cmnd *scmd);
|
|
|
|
u16 mpt2sas_base_get_smid(struct MPT2SAS_ADAPTER *ioc, u8 cb_idx);
|
|
void mpt2sas_base_free_smid(struct MPT2SAS_ADAPTER *ioc, u16 smid);
|
|
void mpt2sas_base_put_smid_scsi_io(struct MPT2SAS_ADAPTER *ioc, u16 smid,
|
|
u16 handle);
|
|
void mpt2sas_base_put_smid_hi_priority(struct MPT2SAS_ADAPTER *ioc, u16 smid);
|
|
void mpt2sas_base_put_smid_target_assist(struct MPT2SAS_ADAPTER *ioc, u16 smid,
|
|
u16 io_index);
|
|
void mpt2sas_base_put_smid_default(struct MPT2SAS_ADAPTER *ioc, u16 smid);
|
|
void mpt2sas_base_initialize_callback_handler(void);
|
|
u8 mpt2sas_base_register_callback_handler(MPT_CALLBACK cb_func);
|
|
void mpt2sas_base_release_callback_handler(u8 cb_idx);
|
|
|
|
u8 mpt2sas_base_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
|
|
u32 reply);
|
|
u8 mpt2sas_port_enable_done(struct MPT2SAS_ADAPTER *ioc, u16 smid,
|
|
u8 msix_index, u32 reply);
|
|
void *mpt2sas_base_get_reply_virt_addr(struct MPT2SAS_ADAPTER *ioc, u32 phys_addr);
|
|
|
|
u32 mpt2sas_base_get_iocstate(struct MPT2SAS_ADAPTER *ioc, int cooked);
|
|
|
|
void mpt2sas_base_fault_info(struct MPT2SAS_ADAPTER *ioc , u16 fault_code);
|
|
int mpt2sas_base_sas_iounit_control(struct MPT2SAS_ADAPTER *ioc,
|
|
Mpi2SasIoUnitControlReply_t *mpi_reply, Mpi2SasIoUnitControlRequest_t
|
|
*mpi_request);
|
|
int mpt2sas_base_scsi_enclosure_processor(struct MPT2SAS_ADAPTER *ioc,
|
|
Mpi2SepReply_t *mpi_reply, Mpi2SepRequest_t *mpi_request);
|
|
void mpt2sas_base_validate_event_type(struct MPT2SAS_ADAPTER *ioc, u32 *event_type);
|
|
|
|
void mpt2sas_halt_firmware(struct MPT2SAS_ADAPTER *ioc);
|
|
|
|
void mpt2sas_base_update_missing_delay(struct MPT2SAS_ADAPTER *ioc,
|
|
u16 device_missing_delay, u8 io_missing_delay);
|
|
|
|
int mpt2sas_port_enable(struct MPT2SAS_ADAPTER *ioc);
|
|
|
|
/* scsih shared API */
|
|
void mpt2sas_scsih_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index,
|
|
u32 reply);
|
|
int mpt2sas_scsih_issue_tm(struct MPT2SAS_ADAPTER *ioc, u16 handle,
|
|
uint channel, uint id, uint lun, u8 type, u16 smid_task,
|
|
ulong timeout, enum mutex_type m_type);
|
|
void mpt2sas_scsih_set_tm_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle);
|
|
void mpt2sas_scsih_clear_tm_flag(struct MPT2SAS_ADAPTER *ioc, u16 handle);
|
|
void mpt2sas_expander_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address);
|
|
void mpt2sas_device_remove_by_sas_address(struct MPT2SAS_ADAPTER *ioc,
|
|
u64 sas_address);
|
|
struct _sas_node *mpt2sas_scsih_expander_find_by_handle(struct MPT2SAS_ADAPTER *ioc,
|
|
u16 handle);
|
|
struct _sas_node *mpt2sas_scsih_expander_find_by_sas_address(struct MPT2SAS_ADAPTER
|
|
*ioc, u64 sas_address);
|
|
struct _sas_device *mpt2sas_scsih_sas_device_find_by_sas_address(
|
|
struct MPT2SAS_ADAPTER *ioc, u64 sas_address);
|
|
|
|
void mpt2sas_port_enable_complete(struct MPT2SAS_ADAPTER *ioc);
|
|
|
|
void mpt2sas_scsih_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase);
|
|
|
|
/* config shared API */
|
|
u8 mpt2sas_config_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
|
|
u32 reply);
|
|
int mpt2sas_config_get_number_hba_phys(struct MPT2SAS_ADAPTER *ioc, u8 *num_phys);
|
|
int mpt2sas_config_get_manufacturing_pg0(struct MPT2SAS_ADAPTER *ioc,
|
|
Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage0_t *config_page);
|
|
int mpt2sas_config_get_manufacturing_pg10(struct MPT2SAS_ADAPTER *ioc,
|
|
Mpi2ConfigReply_t *mpi_reply, Mpi2ManufacturingPage10_t *config_page);
|
|
int mpt2sas_config_get_bios_pg2(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
|
|
*mpi_reply, Mpi2BiosPage2_t *config_page);
|
|
int mpt2sas_config_get_bios_pg3(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
|
|
*mpi_reply, Mpi2BiosPage3_t *config_page);
|
|
int mpt2sas_config_get_iounit_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
|
|
*mpi_reply, Mpi2IOUnitPage0_t *config_page);
|
|
int mpt2sas_config_get_sas_device_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
|
|
*mpi_reply, Mpi2SasDevicePage0_t *config_page, u32 form, u32 handle);
|
|
int mpt2sas_config_get_sas_device_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
|
|
*mpi_reply, Mpi2SasDevicePage1_t *config_page, u32 form, u32 handle);
|
|
int mpt2sas_config_get_sas_iounit_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
|
|
*mpi_reply, Mpi2SasIOUnitPage0_t *config_page, u16 sz);
|
|
int mpt2sas_config_get_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
|
|
*mpi_reply, Mpi2IOUnitPage1_t *config_page);
|
|
int mpt2sas_config_set_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
|
|
*mpi_reply, Mpi2IOUnitPage1_t *config_page);
|
|
int mpt2sas_config_get_iounit_pg8(struct MPT2SAS_ADAPTER *ioc,
|
|
Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage8_t *config_page);
|
|
int mpt2sas_config_get_iounit_pg3(struct MPT2SAS_ADAPTER *ioc,
|
|
Mpi2ConfigReply_t *mpi_reply, Mpi2IOUnitPage3_t *config_page, u16 sz);
|
|
int mpt2sas_config_get_sas_iounit_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
|
|
*mpi_reply, Mpi2SasIOUnitPage1_t *config_page, u16 sz);
|
|
int mpt2sas_config_set_sas_iounit_pg1(struct MPT2SAS_ADAPTER *ioc,
|
|
Mpi2ConfigReply_t *mpi_reply, Mpi2SasIOUnitPage1_t *config_page, u16 sz);
|
|
int mpt2sas_config_get_ioc_pg8(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
|
|
*mpi_reply, Mpi2IOCPage8_t *config_page);
|
|
int mpt2sas_config_get_expander_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
|
|
*mpi_reply, Mpi2ExpanderPage0_t *config_page, u32 form, u32 handle);
|
|
int mpt2sas_config_get_expander_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
|
|
*mpi_reply, Mpi2ExpanderPage1_t *config_page, u32 phy_number, u16 handle);
|
|
int mpt2sas_config_get_enclosure_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
|
|
*mpi_reply, Mpi2SasEnclosurePage0_t *config_page, u32 form, u32 handle);
|
|
int mpt2sas_config_get_phy_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
|
|
*mpi_reply, Mpi2SasPhyPage0_t *config_page, u32 phy_number);
|
|
int mpt2sas_config_get_phy_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
|
|
*mpi_reply, Mpi2SasPhyPage1_t *config_page, u32 phy_number);
|
|
int mpt2sas_config_get_raid_volume_pg1(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
|
|
*mpi_reply, Mpi2RaidVolPage1_t *config_page, u32 form, u32 handle);
|
|
int mpt2sas_config_get_number_pds(struct MPT2SAS_ADAPTER *ioc, u16 handle, u8 *num_pds);
|
|
int mpt2sas_config_get_raid_volume_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
|
|
*mpi_reply, Mpi2RaidVolPage0_t *config_page, u32 form, u32 handle, u16 sz);
|
|
int mpt2sas_config_get_phys_disk_pg0(struct MPT2SAS_ADAPTER *ioc, Mpi2ConfigReply_t
|
|
*mpi_reply, Mpi2RaidPhysDiskPage0_t *config_page, u32 form,
|
|
u32 form_specific);
|
|
int mpt2sas_config_get_volume_handle(struct MPT2SAS_ADAPTER *ioc, u16 pd_handle,
|
|
u16 *volume_handle);
|
|
int mpt2sas_config_get_volume_wwid(struct MPT2SAS_ADAPTER *ioc, u16 volume_handle,
|
|
u64 *wwid);
|
|
/* ctl shared API */
|
|
extern struct device_attribute *mpt2sas_host_attrs[];
|
|
extern struct device_attribute *mpt2sas_dev_attrs[];
|
|
void mpt2sas_ctl_init(void);
|
|
void mpt2sas_ctl_exit(void);
|
|
u8 mpt2sas_ctl_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
|
|
u32 reply);
|
|
void mpt2sas_ctl_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase);
|
|
void mpt2sas_ctl_event_callback(struct MPT2SAS_ADAPTER *ioc, u8 msix_index,
|
|
u32 reply);
|
|
void mpt2sas_ctl_add_to_event_log(struct MPT2SAS_ADAPTER *ioc,
|
|
Mpi2EventNotificationReply_t *mpi_reply);
|
|
|
|
void mpt2sas_enable_diag_buffer(struct MPT2SAS_ADAPTER *ioc,
|
|
u8 bits_to_regsiter);
|
|
|
|
/* transport shared API */
|
|
u8 mpt2sas_transport_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 msix_index,
|
|
u32 reply);
|
|
struct _sas_port *mpt2sas_transport_port_add(struct MPT2SAS_ADAPTER *ioc,
|
|
u16 handle, u64 sas_address);
|
|
void mpt2sas_transport_port_remove(struct MPT2SAS_ADAPTER *ioc, u64 sas_address,
|
|
u64 sas_address_parent);
|
|
int mpt2sas_transport_add_host_phy(struct MPT2SAS_ADAPTER *ioc, struct _sas_phy
|
|
*mpt2sas_phy, Mpi2SasPhyPage0_t phy_pg0, struct device *parent_dev);
|
|
int mpt2sas_transport_add_expander_phy(struct MPT2SAS_ADAPTER *ioc, struct _sas_phy
|
|
*mpt2sas_phy, Mpi2ExpanderPage1_t expander_pg1, struct device *parent_dev);
|
|
void mpt2sas_transport_update_links(struct MPT2SAS_ADAPTER *ioc,
|
|
u64 sas_address, u16 handle, u8 phy_number, u8 link_rate);
|
|
extern struct sas_function_template mpt2sas_transport_functions;
|
|
extern struct scsi_transport_template *mpt2sas_transport_template;
|
|
extern int scsi_internal_device_block(struct scsi_device *sdev);
|
|
extern u8 mpt2sas_stm_zero_smid_handler(struct MPT2SAS_ADAPTER *ioc,
|
|
u8 msix_index, u32 reply);
|
|
extern int scsi_internal_device_unblock(struct scsi_device *sdev,
|
|
enum scsi_device_state new_state);
|
|
|
|
#endif /* MPT2SAS_BASE_H_INCLUDED */
|