linux-sg2042/arch/sparc/kernel/sun4m_irq.c

400 lines
12 KiB
C

/* sun4m_irq.c
* arch/sparc/kernel/sun4m_irq.c:
*
* djhr: Hacked out of irq.c into a CPU dependent version.
*
* Copyright (C) 1995 David S. Miller (davem@caip.rutgers.edu)
* Copyright (C) 1995 Miguel de Icaza (miguel@nuclecu.unam.mx)
* Copyright (C) 1995 Pete A. Zaitcev (zaitcev@yahoo.com)
* Copyright (C) 1996 Dave Redman (djhr@tadpole.co.uk)
*/
#include <linux/config.h>
#include <linux/errno.h>
#include <linux/linkage.h>
#include <linux/kernel_stat.h>
#include <linux/signal.h>
#include <linux/sched.h>
#include <linux/ptrace.h>
#include <linux/smp.h>
#include <linux/interrupt.h>
#include <linux/slab.h>
#include <linux/init.h>
#include <linux/ioport.h>
#include <asm/ptrace.h>
#include <asm/processor.h>
#include <asm/system.h>
#include <asm/psr.h>
#include <asm/vaddrs.h>
#include <asm/timer.h>
#include <asm/openprom.h>
#include <asm/oplib.h>
#include <asm/traps.h>
#include <asm/pgalloc.h>
#include <asm/pgtable.h>
#include <asm/smp.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/sbus.h>
#include <asm/cacheflush.h>
static unsigned long dummy;
struct sun4m_intregs *sun4m_interrupts;
unsigned long *irq_rcvreg = &dummy;
/* These tables only apply for interrupts greater than 15..
*
* any intr value below 0x10 is considered to be a soft-int
* this may be useful or it may not.. but that's how I've done it.
* and it won't clash with what OBP is telling us about devices.
*
* take an encoded intr value and lookup if it's valid
* then get the mask bits that match from irq_mask
*
* P3: Translation from irq 0x0d to mask 0x2000 is for MrCoffee.
*/
static unsigned char irq_xlate[32] = {
/* 0, 1, 2, 3, 4, 5, 6, 7, 8, 9, a, b, c, d, e, f */
0, 0, 0, 0, 1, 0, 2, 0, 3, 0, 4, 5, 6, 14, 0, 7,
0, 0, 8, 9, 0, 10, 0, 11, 0, 12, 0, 13, 0, 14, 0, 0
};
static unsigned long irq_mask[] = {
0, /* illegal index */
SUN4M_INT_SCSI, /* 1 irq 4 */
SUN4M_INT_ETHERNET, /* 2 irq 6 */
SUN4M_INT_VIDEO, /* 3 irq 8 */
SUN4M_INT_REALTIME, /* 4 irq 10 */
SUN4M_INT_FLOPPY, /* 5 irq 11 */
(SUN4M_INT_SERIAL | SUN4M_INT_KBDMS), /* 6 irq 12 */
SUN4M_INT_MODULE_ERR, /* 7 irq 15 */
SUN4M_INT_SBUS(0), /* 8 irq 2 */
SUN4M_INT_SBUS(1), /* 9 irq 3 */
SUN4M_INT_SBUS(2), /* 10 irq 5 */
SUN4M_INT_SBUS(3), /* 11 irq 7 */
SUN4M_INT_SBUS(4), /* 12 irq 9 */
SUN4M_INT_SBUS(5), /* 13 irq 11 */
SUN4M_INT_SBUS(6) /* 14 irq 13 */
};
static int sun4m_pil_map[] = { 0, 2, 3, 5, 7, 9, 11, 13 };
unsigned int sun4m_sbint_to_irq(struct sbus_dev *sdev, unsigned int sbint)
{
if (sbint >= sizeof(sun4m_pil_map)) {
printk(KERN_ERR "%s: bogus SBINT %d\n", sdev->prom_name, sbint);
BUG();
}
return sun4m_pil_map[sbint] | 0x30;
}
inline unsigned long sun4m_get_irqmask(unsigned int irq)
{
unsigned long mask;
if (irq > 0x20) {
/* OBIO/SBUS interrupts */
irq &= 0x1f;
mask = irq_mask[irq_xlate[irq]];
if (!mask)
printk("sun4m_get_irqmask: IRQ%d has no valid mask!\n",irq);
} else {
/* Soft Interrupts will come here.
* Currently there is no way to trigger them but I'm sure
* something could be cooked up.
*/
irq &= 0xf;
mask = SUN4M_SOFT_INT(irq);
}
return mask;
}
static void sun4m_disable_irq(unsigned int irq_nr)
{
unsigned long mask, flags;
int cpu = smp_processor_id();
mask = sun4m_get_irqmask(irq_nr);
local_irq_save(flags);
if (irq_nr > 15)
sun4m_interrupts->set = mask;
else
sun4m_interrupts->cpu_intregs[cpu].set = mask;
local_irq_restore(flags);
}
static void sun4m_enable_irq(unsigned int irq_nr)
{
unsigned long mask, flags;
int cpu = smp_processor_id();
/* Dreadful floppy hack. When we use 0x2b instead of
* 0x0b the system blows (it starts to whistle!).
* So we continue to use 0x0b. Fixme ASAP. --P3
*/
if (irq_nr != 0x0b) {
mask = sun4m_get_irqmask(irq_nr);
local_irq_save(flags);
if (irq_nr > 15)
sun4m_interrupts->clear = mask;
else
sun4m_interrupts->cpu_intregs[cpu].clear = mask;
local_irq_restore(flags);
} else {
local_irq_save(flags);
sun4m_interrupts->clear = SUN4M_INT_FLOPPY;
local_irq_restore(flags);
}
}
static unsigned long cpu_pil_to_imask[16] = {
/*0*/ 0x00000000,
/*1*/ 0x00000000,
/*2*/ SUN4M_INT_SBUS(0) | SUN4M_INT_VME(0),
/*3*/ SUN4M_INT_SBUS(1) | SUN4M_INT_VME(1),
/*4*/ SUN4M_INT_SCSI,
/*5*/ SUN4M_INT_SBUS(2) | SUN4M_INT_VME(2),
/*6*/ SUN4M_INT_ETHERNET,
/*7*/ SUN4M_INT_SBUS(3) | SUN4M_INT_VME(3),
/*8*/ SUN4M_INT_VIDEO,
/*9*/ SUN4M_INT_SBUS(4) | SUN4M_INT_VME(4) | SUN4M_INT_MODULE_ERR,
/*10*/ SUN4M_INT_REALTIME,
/*11*/ SUN4M_INT_SBUS(5) | SUN4M_INT_VME(5) | SUN4M_INT_FLOPPY,
/*12*/ SUN4M_INT_SERIAL | SUN4M_INT_KBDMS,
/*13*/ SUN4M_INT_AUDIO,
/*14*/ SUN4M_INT_E14,
/*15*/ 0x00000000
};
/* We assume the caller has disabled local interrupts when these are called,
* or else very bizarre behavior will result.
*/
static void sun4m_disable_pil_irq(unsigned int pil)
{
sun4m_interrupts->set = cpu_pil_to_imask[pil];
}
static void sun4m_enable_pil_irq(unsigned int pil)
{
sun4m_interrupts->clear = cpu_pil_to_imask[pil];
}
#ifdef CONFIG_SMP
static void sun4m_send_ipi(int cpu, int level)
{
unsigned long mask;
mask = sun4m_get_irqmask(level);
sun4m_interrupts->cpu_intregs[cpu].set = mask;
}
static void sun4m_clear_ipi(int cpu, int level)
{
unsigned long mask;
mask = sun4m_get_irqmask(level);
sun4m_interrupts->cpu_intregs[cpu].clear = mask;
}
static void sun4m_set_udt(int cpu)
{
sun4m_interrupts->undirected_target = cpu;
}
#endif
#define OBIO_INTR 0x20
#define TIMER_IRQ (OBIO_INTR | 10)
#define PROFILE_IRQ (OBIO_INTR | 14)
struct sun4m_timer_regs *sun4m_timers;
unsigned int lvl14_resolution = (((1000000/HZ) + 1) << 10);
static void sun4m_clear_clock_irq(void)
{
volatile unsigned int clear_intr;
clear_intr = sun4m_timers->l10_timer_limit;
}
static void sun4m_clear_profile_irq(int cpu)
{
volatile unsigned int clear;
clear = sun4m_timers->cpu_timers[cpu].l14_timer_limit;
}
static void sun4m_load_profile_irq(int cpu, unsigned int limit)
{
sun4m_timers->cpu_timers[cpu].l14_timer_limit = limit;
}
char *sun4m_irq_itoa(unsigned int irq)
{
static char buff[16];
sprintf(buff, "%d", irq);
return buff;
}
static void __init sun4m_init_timers(irqreturn_t (*counter_fn)(int, void *, struct pt_regs *))
{
int reg_count, irq, cpu;
struct linux_prom_registers cnt_regs[PROMREG_MAX];
int obio_node, cnt_node;
struct resource r;
cnt_node = 0;
if((obio_node =
prom_searchsiblings (prom_getchild(prom_root_node), "obio")) == 0 ||
(obio_node = prom_getchild (obio_node)) == 0 ||
(cnt_node = prom_searchsiblings (obio_node, "counter")) == 0) {
prom_printf("Cannot find /obio/counter node\n");
prom_halt();
}
reg_count = prom_getproperty(cnt_node, "reg",
(void *) cnt_regs, sizeof(cnt_regs));
reg_count = (reg_count/sizeof(struct linux_prom_registers));
/* Apply the obio ranges to the timer registers. */
prom_apply_obio_ranges(cnt_regs, reg_count);
cnt_regs[4].phys_addr = cnt_regs[reg_count-1].phys_addr;
cnt_regs[4].reg_size = cnt_regs[reg_count-1].reg_size;
cnt_regs[4].which_io = cnt_regs[reg_count-1].which_io;
for(obio_node = 1; obio_node < 4; obio_node++) {
cnt_regs[obio_node].phys_addr =
cnt_regs[obio_node-1].phys_addr + PAGE_SIZE;
cnt_regs[obio_node].reg_size = cnt_regs[obio_node-1].reg_size;
cnt_regs[obio_node].which_io = cnt_regs[obio_node-1].which_io;
}
memset((char*)&r, 0, sizeof(struct resource));
/* Map the per-cpu Counter registers. */
r.flags = cnt_regs[0].which_io;
r.start = cnt_regs[0].phys_addr;
sun4m_timers = (struct sun4m_timer_regs *) sbus_ioremap(&r, 0,
PAGE_SIZE*SUN4M_NCPUS, "sun4m_cpu_cnt");
/* Map the system Counter register. */
/* XXX Here we expect consequent calls to yeld adjusent maps. */
r.flags = cnt_regs[4].which_io;
r.start = cnt_regs[4].phys_addr;
sbus_ioremap(&r, 0, cnt_regs[4].reg_size, "sun4m_sys_cnt");
sun4m_timers->l10_timer_limit = (((1000000/HZ) + 1) << 10);
master_l10_counter = &sun4m_timers->l10_cur_count;
master_l10_limit = &sun4m_timers->l10_timer_limit;
irq = request_irq(TIMER_IRQ,
counter_fn,
(SA_INTERRUPT | SA_STATIC_ALLOC),
"timer", NULL);
if (irq) {
prom_printf("time_init: unable to attach IRQ%d\n",TIMER_IRQ);
prom_halt();
}
if (!cpu_find_by_instance(1, NULL, NULL)) {
for(cpu = 0; cpu < 4; cpu++)
sun4m_timers->cpu_timers[cpu].l14_timer_limit = 0;
sun4m_interrupts->set = SUN4M_INT_E14;
} else {
sun4m_timers->cpu_timers[0].l14_timer_limit = 0;
}
#ifdef CONFIG_SMP
{
unsigned long flags;
extern unsigned long lvl14_save[4];
struct tt_entry *trap_table = &sparc_ttable[SP_TRAP_IRQ1 + (14 - 1)];
/* For SMP we use the level 14 ticker, however the bootup code
* has copied the firmwares level 14 vector into boot cpu's
* trap table, we must fix this now or we get squashed.
*/
local_irq_save(flags);
trap_table->inst_one = lvl14_save[0];
trap_table->inst_two = lvl14_save[1];
trap_table->inst_three = lvl14_save[2];
trap_table->inst_four = lvl14_save[3];
local_flush_cache_all();
local_irq_restore(flags);
}
#endif
}
void __init sun4m_init_IRQ(void)
{
int ie_node,i;
struct linux_prom_registers int_regs[PROMREG_MAX];
int num_regs;
struct resource r;
int mid;
local_irq_disable();
if((ie_node = prom_searchsiblings(prom_getchild(prom_root_node), "obio")) == 0 ||
(ie_node = prom_getchild (ie_node)) == 0 ||
(ie_node = prom_searchsiblings (ie_node, "interrupt")) == 0) {
prom_printf("Cannot find /obio/interrupt node\n");
prom_halt();
}
num_regs = prom_getproperty(ie_node, "reg", (char *) int_regs,
sizeof(int_regs));
num_regs = (num_regs/sizeof(struct linux_prom_registers));
/* Apply the obio ranges to these registers. */
prom_apply_obio_ranges(int_regs, num_regs);
int_regs[4].phys_addr = int_regs[num_regs-1].phys_addr;
int_regs[4].reg_size = int_regs[num_regs-1].reg_size;
int_regs[4].which_io = int_regs[num_regs-1].which_io;
for(ie_node = 1; ie_node < 4; ie_node++) {
int_regs[ie_node].phys_addr = int_regs[ie_node-1].phys_addr + PAGE_SIZE;
int_regs[ie_node].reg_size = int_regs[ie_node-1].reg_size;
int_regs[ie_node].which_io = int_regs[ie_node-1].which_io;
}
memset((char *)&r, 0, sizeof(struct resource));
/* Map the interrupt registers for all possible cpus. */
r.flags = int_regs[0].which_io;
r.start = int_regs[0].phys_addr;
sun4m_interrupts = (struct sun4m_intregs *) sbus_ioremap(&r, 0,
PAGE_SIZE*SUN4M_NCPUS, "interrupts_percpu");
/* Map the system interrupt control registers. */
r.flags = int_regs[4].which_io;
r.start = int_regs[4].phys_addr;
sbus_ioremap(&r, 0, int_regs[4].reg_size, "interrupts_system");
sun4m_interrupts->set = ~SUN4M_INT_MASKALL;
for (i = 0; !cpu_find_by_instance(i, NULL, &mid); i++)
sun4m_interrupts->cpu_intregs[mid].clear = ~0x17fff;
if (!cpu_find_by_instance(1, NULL, NULL)) {
/* system wide interrupts go to cpu 0, this should always
* be safe because it is guaranteed to be fitted or OBP doesn't
* come up
*
* Not sure, but writing here on SLAVIO systems may puke
* so I don't do it unless there is more than 1 cpu.
*/
irq_rcvreg = (unsigned long *)
&sun4m_interrupts->undirected_target;
sun4m_interrupts->undirected_target = 0;
}
BTFIXUPSET_CALL(sbint_to_irq, sun4m_sbint_to_irq, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(enable_irq, sun4m_enable_irq, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(disable_irq, sun4m_disable_irq, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(enable_pil_irq, sun4m_enable_pil_irq, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(disable_pil_irq, sun4m_disable_pil_irq, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(clear_clock_irq, sun4m_clear_clock_irq, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(clear_profile_irq, sun4m_clear_profile_irq, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(load_profile_irq, sun4m_load_profile_irq, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(__irq_itoa, sun4m_irq_itoa, BTFIXUPCALL_NORM);
sparc_init_timers = sun4m_init_timers;
#ifdef CONFIG_SMP
BTFIXUPSET_CALL(set_cpu_int, sun4m_send_ipi, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(clear_cpu_int, sun4m_clear_ipi, BTFIXUPCALL_NORM);
BTFIXUPSET_CALL(set_irq_udt, sun4m_set_udt, BTFIXUPCALL_NORM);
#endif
/* Cannot enable interrupts until OBP ticker is disabled. */
}