linux-sg2042/arch/arm/mach-omap2/devices.c

908 lines
21 KiB
C

/*
* linux/arch/arm/mach-omap2/devices.c
*
* OMAP2 platform device setup/initialization
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/io.h>
#include <linux/clk.h>
#include <linux/err.h>
#include <linux/slab.h>
#include <mach/hardware.h>
#include <mach/irqs.h>
#include <asm/mach-types.h>
#include <asm/mach/map.h>
#include <asm/pmu.h>
#include <plat/tc.h>
#include <plat/board.h>
#include <plat/mcbsp.h>
#include <mach/gpio.h>
#include <plat/mmc.h>
#include <plat/dma.h>
#include <plat/omap_hwmod.h>
#include <plat/omap_device.h>
#include "mux.h"
#include "control.h"
#if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE)
static struct resource cam_resources[] = {
{
.start = OMAP24XX_CAMERA_BASE,
.end = OMAP24XX_CAMERA_BASE + 0xfff,
.flags = IORESOURCE_MEM,
},
{
.start = INT_24XX_CAM_IRQ,
.flags = IORESOURCE_IRQ,
}
};
static struct platform_device omap_cam_device = {
.name = "omap24xxcam",
.id = -1,
.num_resources = ARRAY_SIZE(cam_resources),
.resource = cam_resources,
};
static inline void omap_init_camera(void)
{
platform_device_register(&omap_cam_device);
}
#elif defined(CONFIG_VIDEO_OMAP3) || defined(CONFIG_VIDEO_OMAP3_MODULE)
static struct resource omap3isp_resources[] = {
{
.start = OMAP3430_ISP_BASE,
.end = OMAP3430_ISP_END,
.flags = IORESOURCE_MEM,
},
{
.start = OMAP3430_ISP_CBUFF_BASE,
.end = OMAP3430_ISP_CBUFF_END,
.flags = IORESOURCE_MEM,
},
{
.start = OMAP3430_ISP_CCP2_BASE,
.end = OMAP3430_ISP_CCP2_END,
.flags = IORESOURCE_MEM,
},
{
.start = OMAP3430_ISP_CCDC_BASE,
.end = OMAP3430_ISP_CCDC_END,
.flags = IORESOURCE_MEM,
},
{
.start = OMAP3430_ISP_HIST_BASE,
.end = OMAP3430_ISP_HIST_END,
.flags = IORESOURCE_MEM,
},
{
.start = OMAP3430_ISP_H3A_BASE,
.end = OMAP3430_ISP_H3A_END,
.flags = IORESOURCE_MEM,
},
{
.start = OMAP3430_ISP_PREV_BASE,
.end = OMAP3430_ISP_PREV_END,
.flags = IORESOURCE_MEM,
},
{
.start = OMAP3430_ISP_RESZ_BASE,
.end = OMAP3430_ISP_RESZ_END,
.flags = IORESOURCE_MEM,
},
{
.start = OMAP3430_ISP_SBL_BASE,
.end = OMAP3430_ISP_SBL_END,
.flags = IORESOURCE_MEM,
},
{
.start = OMAP3430_ISP_CSI2A_BASE,
.end = OMAP3430_ISP_CSI2A_END,
.flags = IORESOURCE_MEM,
},
{
.start = OMAP3430_ISP_CSI2PHY_BASE,
.end = OMAP3430_ISP_CSI2PHY_END,
.flags = IORESOURCE_MEM,
},
{
.start = INT_34XX_CAM_IRQ,
.flags = IORESOURCE_IRQ,
}
};
static struct platform_device omap3isp_device = {
.name = "omap3isp",
.id = -1,
.num_resources = ARRAY_SIZE(omap3isp_resources),
.resource = omap3isp_resources,
};
static inline void omap_init_camera(void)
{
platform_device_register(&omap3isp_device);
}
#else
static inline void omap_init_camera(void)
{
}
#endif
#if defined(CONFIG_OMAP_MBOX_FWK) || defined(CONFIG_OMAP_MBOX_FWK_MODULE)
#define MBOX_REG_SIZE 0x120
#ifdef CONFIG_ARCH_OMAP2
static struct resource omap2_mbox_resources[] = {
{
.start = OMAP24XX_MAILBOX_BASE,
.end = OMAP24XX_MAILBOX_BASE + MBOX_REG_SIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = INT_24XX_MAIL_U0_MPU,
.flags = IORESOURCE_IRQ,
.name = "dsp",
},
{
.start = INT_24XX_MAIL_U3_MPU,
.flags = IORESOURCE_IRQ,
.name = "iva",
},
};
static int omap2_mbox_resources_sz = ARRAY_SIZE(omap2_mbox_resources);
#else
#define omap2_mbox_resources NULL
#define omap2_mbox_resources_sz 0
#endif
#ifdef CONFIG_ARCH_OMAP3
static struct resource omap3_mbox_resources[] = {
{
.start = OMAP34XX_MAILBOX_BASE,
.end = OMAP34XX_MAILBOX_BASE + MBOX_REG_SIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = INT_24XX_MAIL_U0_MPU,
.flags = IORESOURCE_IRQ,
.name = "dsp",
},
};
static int omap3_mbox_resources_sz = ARRAY_SIZE(omap3_mbox_resources);
#else
#define omap3_mbox_resources NULL
#define omap3_mbox_resources_sz 0
#endif
#ifdef CONFIG_ARCH_OMAP4
#define OMAP4_MBOX_REG_SIZE 0x130
static struct resource omap4_mbox_resources[] = {
{
.start = OMAP44XX_MAILBOX_BASE,
.end = OMAP44XX_MAILBOX_BASE +
OMAP4_MBOX_REG_SIZE - 1,
.flags = IORESOURCE_MEM,
},
{
.start = OMAP44XX_IRQ_MAIL_U0,
.flags = IORESOURCE_IRQ,
.name = "mbox",
},
};
static int omap4_mbox_resources_sz = ARRAY_SIZE(omap4_mbox_resources);
#else
#define omap4_mbox_resources NULL
#define omap4_mbox_resources_sz 0
#endif
static struct platform_device mbox_device = {
.name = "omap-mailbox",
.id = -1,
};
static inline void omap_init_mbox(void)
{
if (cpu_is_omap24xx()) {
mbox_device.resource = omap2_mbox_resources;
mbox_device.num_resources = omap2_mbox_resources_sz;
} else if (cpu_is_omap34xx()) {
mbox_device.resource = omap3_mbox_resources;
mbox_device.num_resources = omap3_mbox_resources_sz;
} else if (cpu_is_omap44xx()) {
mbox_device.resource = omap4_mbox_resources;
mbox_device.num_resources = omap4_mbox_resources_sz;
} else {
pr_err("%s: platform not supported\n", __func__);
return;
}
platform_device_register(&mbox_device);
}
#else
static inline void omap_init_mbox(void) { }
#endif /* CONFIG_OMAP_MBOX_FWK */
static inline void omap_init_sti(void) {}
#if defined(CONFIG_SND_SOC) || defined(CONFIG_SND_SOC_MODULE)
static struct platform_device omap_pcm = {
.name = "omap-pcm-audio",
.id = -1,
};
/*
* OMAP2420 has 2 McBSP ports
* OMAP2430 has 5 McBSP ports
* OMAP3 has 5 McBSP ports
* OMAP4 has 4 McBSP ports
*/
OMAP_MCBSP_PLATFORM_DEVICE(1);
OMAP_MCBSP_PLATFORM_DEVICE(2);
OMAP_MCBSP_PLATFORM_DEVICE(3);
OMAP_MCBSP_PLATFORM_DEVICE(4);
OMAP_MCBSP_PLATFORM_DEVICE(5);
static void omap_init_audio(void)
{
platform_device_register(&omap_mcbsp1);
platform_device_register(&omap_mcbsp2);
if (cpu_is_omap243x() || cpu_is_omap34xx() || cpu_is_omap44xx()) {
platform_device_register(&omap_mcbsp3);
platform_device_register(&omap_mcbsp4);
}
if (cpu_is_omap243x() || cpu_is_omap34xx())
platform_device_register(&omap_mcbsp5);
platform_device_register(&omap_pcm);
}
#else
static inline void omap_init_audio(void) {}
#endif
#if defined(CONFIG_SPI_OMAP24XX) || defined(CONFIG_SPI_OMAP24XX_MODULE)
#include <plat/mcspi.h>
struct omap_device_pm_latency omap_mcspi_latency[] = {
[0] = {
.deactivate_func = omap_device_idle_hwmods,
.activate_func = omap_device_enable_hwmods,
.flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
},
};
static int omap_mcspi_init(struct omap_hwmod *oh, void *unused)
{
struct omap_device *od;
char *name = "omap2_mcspi";
struct omap2_mcspi_platform_config *pdata;
static int spi_num;
struct omap2_mcspi_dev_attr *mcspi_attrib = oh->dev_attr;
pdata = kzalloc(sizeof(*pdata), GFP_KERNEL);
if (!pdata) {
pr_err("Memory allocation for McSPI device failed\n");
return -ENOMEM;
}
pdata->num_cs = mcspi_attrib->num_chipselect;
switch (oh->class->rev) {
case OMAP2_MCSPI_REV:
case OMAP3_MCSPI_REV:
pdata->regs_offset = 0;
break;
case OMAP4_MCSPI_REV:
pdata->regs_offset = OMAP4_MCSPI_REG_OFFSET;
break;
default:
pr_err("Invalid McSPI Revision value\n");
return -EINVAL;
}
spi_num++;
od = omap_device_build(name, spi_num, oh, pdata,
sizeof(*pdata), omap_mcspi_latency,
ARRAY_SIZE(omap_mcspi_latency), 0);
WARN(IS_ERR(od), "Cant build omap_device for %s:%s\n",
name, oh->name);
kfree(pdata);
return 0;
}
static void omap_init_mcspi(void)
{
omap_hwmod_for_each_by_class("mcspi", omap_mcspi_init, NULL);
}
#else
static inline void omap_init_mcspi(void) {}
#endif
static struct resource omap2_pmu_resource = {
.start = 3,
.end = 3,
.flags = IORESOURCE_IRQ,
};
static struct resource omap3_pmu_resource = {
.start = INT_34XX_BENCH_MPU_EMUL,
.end = INT_34XX_BENCH_MPU_EMUL,
.flags = IORESOURCE_IRQ,
};
static struct platform_device omap_pmu_device = {
.name = "arm-pmu",
.id = ARM_PMU_DEVICE_CPU,
.num_resources = 1,
};
static void omap_init_pmu(void)
{
if (cpu_is_omap24xx())
omap_pmu_device.resource = &omap2_pmu_resource;
else if (cpu_is_omap34xx())
omap_pmu_device.resource = &omap3_pmu_resource;
else
return;
platform_device_register(&omap_pmu_device);
}
#if defined(CONFIG_CRYPTO_DEV_OMAP_SHAM) || defined(CONFIG_CRYPTO_DEV_OMAP_SHAM_MODULE)
#ifdef CONFIG_ARCH_OMAP2
static struct resource omap2_sham_resources[] = {
{
.start = OMAP24XX_SEC_SHA1MD5_BASE,
.end = OMAP24XX_SEC_SHA1MD5_BASE + 0x64,
.flags = IORESOURCE_MEM,
},
{
.start = INT_24XX_SHA1MD5,
.flags = IORESOURCE_IRQ,
}
};
static int omap2_sham_resources_sz = ARRAY_SIZE(omap2_sham_resources);
#else
#define omap2_sham_resources NULL
#define omap2_sham_resources_sz 0
#endif
#ifdef CONFIG_ARCH_OMAP3
static struct resource omap3_sham_resources[] = {
{
.start = OMAP34XX_SEC_SHA1MD5_BASE,
.end = OMAP34XX_SEC_SHA1MD5_BASE + 0x64,
.flags = IORESOURCE_MEM,
},
{
.start = INT_34XX_SHA1MD52_IRQ,
.flags = IORESOURCE_IRQ,
},
{
.start = OMAP34XX_DMA_SHA1MD5_RX,
.flags = IORESOURCE_DMA,
}
};
static int omap3_sham_resources_sz = ARRAY_SIZE(omap3_sham_resources);
#else
#define omap3_sham_resources NULL
#define omap3_sham_resources_sz 0
#endif
static struct platform_device sham_device = {
.name = "omap-sham",
.id = -1,
};
static void omap_init_sham(void)
{
if (cpu_is_omap24xx()) {
sham_device.resource = omap2_sham_resources;
sham_device.num_resources = omap2_sham_resources_sz;
} else if (cpu_is_omap34xx()) {
sham_device.resource = omap3_sham_resources;
sham_device.num_resources = omap3_sham_resources_sz;
} else {
pr_err("%s: platform not supported\n", __func__);
return;
}
platform_device_register(&sham_device);
}
#else
static inline void omap_init_sham(void) { }
#endif
#if defined(CONFIG_CRYPTO_DEV_OMAP_AES) || defined(CONFIG_CRYPTO_DEV_OMAP_AES_MODULE)
#ifdef CONFIG_ARCH_OMAP2
static struct resource omap2_aes_resources[] = {
{
.start = OMAP24XX_SEC_AES_BASE,
.end = OMAP24XX_SEC_AES_BASE + 0x4C,
.flags = IORESOURCE_MEM,
},
{
.start = OMAP24XX_DMA_AES_TX,
.flags = IORESOURCE_DMA,
},
{
.start = OMAP24XX_DMA_AES_RX,
.flags = IORESOURCE_DMA,
}
};
static int omap2_aes_resources_sz = ARRAY_SIZE(omap2_aes_resources);
#else
#define omap2_aes_resources NULL
#define omap2_aes_resources_sz 0
#endif
#ifdef CONFIG_ARCH_OMAP3
static struct resource omap3_aes_resources[] = {
{
.start = OMAP34XX_SEC_AES_BASE,
.end = OMAP34XX_SEC_AES_BASE + 0x4C,
.flags = IORESOURCE_MEM,
},
{
.start = OMAP34XX_DMA_AES2_TX,
.flags = IORESOURCE_DMA,
},
{
.start = OMAP34XX_DMA_AES2_RX,
.flags = IORESOURCE_DMA,
}
};
static int omap3_aes_resources_sz = ARRAY_SIZE(omap3_aes_resources);
#else
#define omap3_aes_resources NULL
#define omap3_aes_resources_sz 0
#endif
static struct platform_device aes_device = {
.name = "omap-aes",
.id = -1,
};
static void omap_init_aes(void)
{
if (cpu_is_omap24xx()) {
aes_device.resource = omap2_aes_resources;
aes_device.num_resources = omap2_aes_resources_sz;
} else if (cpu_is_omap34xx()) {
aes_device.resource = omap3_aes_resources;
aes_device.num_resources = omap3_aes_resources_sz;
} else {
pr_err("%s: platform not supported\n", __func__);
return;
}
platform_device_register(&aes_device);
}
#else
static inline void omap_init_aes(void) { }
#endif
/*-------------------------------------------------------------------------*/
#if defined(CONFIG_ARCH_OMAP3) || defined(CONFIG_ARCH_OMAP4)
#define MMCHS_SYSCONFIG 0x0010
#define MMCHS_SYSCONFIG_SWRESET (1 << 1)
#define MMCHS_SYSSTATUS 0x0014
#define MMCHS_SYSSTATUS_RESETDONE (1 << 0)
static struct platform_device dummy_pdev = {
.dev = {
.bus = &platform_bus_type,
},
};
/**
* omap_hsmmc_reset() - Full reset of each HS-MMC controller
*
* Ensure that each MMC controller is fully reset. Controllers
* left in an unknown state (by bootloader) may prevent retention
* or OFF-mode. This is especially important in cases where the
* MMC driver is not enabled, _or_ built as a module.
*
* In order for reset to work, interface, functional and debounce
* clocks must be enabled. The debounce clock comes from func_32k_clk
* and is not under SW control, so we only enable i- and f-clocks.
**/
static void __init omap_hsmmc_reset(void)
{
u32 i, nr_controllers;
struct clk *iclk, *fclk;
if (cpu_is_omap242x())
return;
nr_controllers = cpu_is_omap44xx() ? OMAP44XX_NR_MMC :
(cpu_is_omap34xx() ? OMAP34XX_NR_MMC : OMAP24XX_NR_MMC);
for (i = 0; i < nr_controllers; i++) {
u32 v, base = 0;
struct device *dev = &dummy_pdev.dev;
switch (i) {
case 0:
base = OMAP2_MMC1_BASE;
break;
case 1:
base = OMAP2_MMC2_BASE;
break;
case 2:
base = OMAP3_MMC3_BASE;
break;
case 3:
if (!cpu_is_omap44xx())
return;
base = OMAP4_MMC4_BASE;
break;
case 4:
if (!cpu_is_omap44xx())
return;
base = OMAP4_MMC5_BASE;
break;
}
if (cpu_is_omap44xx())
base += OMAP4_MMC_REG_OFFSET;
dummy_pdev.id = i;
dev_set_name(&dummy_pdev.dev, "mmci-omap-hs.%d", i);
iclk = clk_get(dev, "ick");
if (IS_ERR(iclk))
goto err1;
if (clk_enable(iclk))
goto err2;
fclk = clk_get(dev, "fck");
if (IS_ERR(fclk))
goto err3;
if (clk_enable(fclk))
goto err4;
omap_writel(MMCHS_SYSCONFIG_SWRESET, base + MMCHS_SYSCONFIG);
v = omap_readl(base + MMCHS_SYSSTATUS);
while (!(omap_readl(base + MMCHS_SYSSTATUS) &
MMCHS_SYSSTATUS_RESETDONE))
cpu_relax();
clk_disable(fclk);
clk_put(fclk);
clk_disable(iclk);
clk_put(iclk);
}
return;
err4:
clk_put(fclk);
err3:
clk_disable(iclk);
err2:
clk_put(iclk);
err1:
printk(KERN_WARNING "%s: Unable to enable clocks for MMC%d, "
"cannot reset.\n", __func__, i);
}
#else
static inline void omap_hsmmc_reset(void) {}
#endif
#if defined(CONFIG_MMC_OMAP) || defined(CONFIG_MMC_OMAP_MODULE) || \
defined(CONFIG_MMC_OMAP_HS) || defined(CONFIG_MMC_OMAP_HS_MODULE)
static inline void omap2_mmc_mux(struct omap_mmc_platform_data *mmc_controller,
int controller_nr)
{
if ((mmc_controller->slots[0].switch_pin > 0) && \
(mmc_controller->slots[0].switch_pin < OMAP_MAX_GPIO_LINES))
omap_mux_init_gpio(mmc_controller->slots[0].switch_pin,
OMAP_PIN_INPUT_PULLUP);
if ((mmc_controller->slots[0].gpio_wp > 0) && \
(mmc_controller->slots[0].gpio_wp < OMAP_MAX_GPIO_LINES))
omap_mux_init_gpio(mmc_controller->slots[0].gpio_wp,
OMAP_PIN_INPUT_PULLUP);
if (cpu_is_omap2420() && controller_nr == 0) {
omap_mux_init_signal("sdmmc_cmd", 0);
omap_mux_init_signal("sdmmc_clki", 0);
omap_mux_init_signal("sdmmc_clko", 0);
omap_mux_init_signal("sdmmc_dat0", 0);
omap_mux_init_signal("sdmmc_dat_dir0", 0);
omap_mux_init_signal("sdmmc_cmd_dir", 0);
if (mmc_controller->slots[0].caps & MMC_CAP_4_BIT_DATA) {
omap_mux_init_signal("sdmmc_dat1", 0);
omap_mux_init_signal("sdmmc_dat2", 0);
omap_mux_init_signal("sdmmc_dat3", 0);
omap_mux_init_signal("sdmmc_dat_dir1", 0);
omap_mux_init_signal("sdmmc_dat_dir2", 0);
omap_mux_init_signal("sdmmc_dat_dir3", 0);
}
/*
* Use internal loop-back in MMC/SDIO Module Input Clock
* selection
*/
if (mmc_controller->slots[0].internal_clock) {
u32 v = omap_ctrl_readl(OMAP2_CONTROL_DEVCONF0);
v |= (1 << 24);
omap_ctrl_writel(v, OMAP2_CONTROL_DEVCONF0);
}
}
if (cpu_is_omap34xx()) {
if (controller_nr == 0) {
omap_mux_init_signal("sdmmc1_clk",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc1_cmd",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc1_dat0",
OMAP_PIN_INPUT_PULLUP);
if (mmc_controller->slots[0].caps &
(MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) {
omap_mux_init_signal("sdmmc1_dat1",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc1_dat2",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc1_dat3",
OMAP_PIN_INPUT_PULLUP);
}
if (mmc_controller->slots[0].caps &
MMC_CAP_8_BIT_DATA) {
omap_mux_init_signal("sdmmc1_dat4",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc1_dat5",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc1_dat6",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc1_dat7",
OMAP_PIN_INPUT_PULLUP);
}
}
if (controller_nr == 1) {
/* MMC2 */
omap_mux_init_signal("sdmmc2_clk",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc2_cmd",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc2_dat0",
OMAP_PIN_INPUT_PULLUP);
/*
* For 8 wire configurations, Lines DAT4, 5, 6 and 7 need to be muxed
* in the board-*.c files
*/
if (mmc_controller->slots[0].caps &
(MMC_CAP_4_BIT_DATA | MMC_CAP_8_BIT_DATA)) {
omap_mux_init_signal("sdmmc2_dat1",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc2_dat2",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc2_dat3",
OMAP_PIN_INPUT_PULLUP);
}
if (mmc_controller->slots[0].caps &
MMC_CAP_8_BIT_DATA) {
omap_mux_init_signal("sdmmc2_dat4.sdmmc2_dat4",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc2_dat5.sdmmc2_dat5",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc2_dat6.sdmmc2_dat6",
OMAP_PIN_INPUT_PULLUP);
omap_mux_init_signal("sdmmc2_dat7.sdmmc2_dat7",
OMAP_PIN_INPUT_PULLUP);
}
}
/*
* For MMC3 the pins need to be muxed in the board-*.c files
*/
}
}
void __init omap2_init_mmc(struct omap_mmc_platform_data **mmc_data,
int nr_controllers)
{
int i;
char *name;
for (i = 0; i < nr_controllers; i++) {
unsigned long base, size;
unsigned int irq = 0;
if (!mmc_data[i])
continue;
omap2_mmc_mux(mmc_data[i], i);
switch (i) {
case 0:
base = OMAP2_MMC1_BASE;
irq = INT_24XX_MMC_IRQ;
break;
case 1:
base = OMAP2_MMC2_BASE;
irq = INT_24XX_MMC2_IRQ;
break;
case 2:
if (!cpu_is_omap44xx() && !cpu_is_omap34xx())
return;
base = OMAP3_MMC3_BASE;
irq = INT_34XX_MMC3_IRQ;
break;
case 3:
if (!cpu_is_omap44xx())
return;
base = OMAP4_MMC4_BASE;
irq = OMAP44XX_IRQ_MMC4;
break;
case 4:
if (!cpu_is_omap44xx())
return;
base = OMAP4_MMC5_BASE;
irq = OMAP44XX_IRQ_MMC5;
break;
default:
continue;
}
if (cpu_is_omap2420()) {
size = OMAP2420_MMC_SIZE;
name = "mmci-omap";
} else if (cpu_is_omap44xx()) {
if (i < 3)
irq += OMAP44XX_IRQ_GIC_START;
size = OMAP4_HSMMC_SIZE;
name = "mmci-omap-hs";
} else {
size = OMAP3_HSMMC_SIZE;
name = "mmci-omap-hs";
}
omap_mmc_add(name, i, base, size, irq, mmc_data[i]);
};
}
#endif
/*-------------------------------------------------------------------------*/
#if defined(CONFIG_HDQ_MASTER_OMAP) || defined(CONFIG_HDQ_MASTER_OMAP_MODULE)
#if defined(CONFIG_SOC_OMAP2430) || defined(CONFIG_SOC_OMAP3430)
#define OMAP_HDQ_BASE 0x480B2000
#endif
static struct resource omap_hdq_resources[] = {
{
.start = OMAP_HDQ_BASE,
.end = OMAP_HDQ_BASE + 0x1C,
.flags = IORESOURCE_MEM,
},
{
.start = INT_24XX_HDQ_IRQ,
.flags = IORESOURCE_IRQ,
},
};
static struct platform_device omap_hdq_dev = {
.name = "omap_hdq",
.id = 0,
.dev = {
.platform_data = NULL,
},
.num_resources = ARRAY_SIZE(omap_hdq_resources),
.resource = omap_hdq_resources,
};
static inline void omap_hdq_init(void)
{
(void) platform_device_register(&omap_hdq_dev);
}
#else
static inline void omap_hdq_init(void) {}
#endif
/*---------------------------------------------------------------------------*/
#if defined(CONFIG_VIDEO_OMAP2_VOUT) || \
defined(CONFIG_VIDEO_OMAP2_VOUT_MODULE)
#if defined(CONFIG_FB_OMAP2) || defined(CONFIG_FB_OMAP2_MODULE)
static struct resource omap_vout_resource[3 - CONFIG_FB_OMAP2_NUM_FBS] = {
};
#else
static struct resource omap_vout_resource[2] = {
};
#endif
static struct platform_device omap_vout_device = {
.name = "omap_vout",
.num_resources = ARRAY_SIZE(omap_vout_resource),
.resource = &omap_vout_resource[0],
.id = -1,
};
static void omap_init_vout(void)
{
if (platform_device_register(&omap_vout_device) < 0)
printk(KERN_ERR "Unable to register OMAP-VOUT device\n");
}
#else
static inline void omap_init_vout(void) {}
#endif
/*-------------------------------------------------------------------------*/
static int __init omap2_init_devices(void)
{
/*
* please keep these calls, and their implementations above,
* in alphabetical order so they're easier to sort through.
*/
omap_hsmmc_reset();
omap_init_audio();
omap_init_camera();
omap_init_mbox();
omap_init_mcspi();
omap_init_pmu();
omap_hdq_init();
omap_init_sti();
omap_init_sham();
omap_init_aes();
omap_init_vout();
return 0;
}
arch_initcall(omap2_init_devices);
#if defined(CONFIG_OMAP_WATCHDOG) || defined(CONFIG_OMAP_WATCHDOG_MODULE)
static struct omap_device_pm_latency omap_wdt_latency[] = {
[0] = {
.deactivate_func = omap_device_idle_hwmods,
.activate_func = omap_device_enable_hwmods,
.flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST,
},
};
static int __init omap_init_wdt(void)
{
int id = -1;
struct omap_device *od;
struct omap_hwmod *oh;
char *oh_name = "wd_timer2";
char *dev_name = "omap_wdt";
if (!cpu_class_is_omap2())
return 0;
oh = omap_hwmod_lookup(oh_name);
if (!oh) {
pr_err("Could not look up wd_timer%d hwmod\n", id);
return -EINVAL;
}
od = omap_device_build(dev_name, id, oh, NULL, 0,
omap_wdt_latency,
ARRAY_SIZE(omap_wdt_latency), 0);
WARN(IS_ERR(od), "Cant build omap_device for %s:%s.\n",
dev_name, oh->name);
return 0;
}
subsys_initcall(omap_init_wdt);
#endif