linux-sg2042/arch/arm
Andrew Victor df666b9c51 [ARM] 3325/2: GPIO function to control multi-drive (open collector) capability
Patch from Andrew Victor

This patch adds the at91_set_multi_drive() function to enable/disable
the multi-drive (open collector) pin capability on the AT91RM9200
processor.

This is necessary to fix the UDC (USB Gadget) driver for the AT91RM9200
board as it will not allow the board reset line to be pulled low if the
pullup is not driven as an open collector output as the boards are wired
to the USB connector on both the DK/EK.

This version of the patch updates it to 2.6.16-rc4.
Orignal patch by Jeff Warren.

Signed-off-by: Andrew Victor <andrew@sanpeople.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2006-02-22 21:23:35 +00:00
..
boot [ARM] 3272/1: fix kernel decompressor crash 2006-01-18 22:38:51 +00:00
common [ARM] 3345/1: Fix interday RTC alarms 2006-02-22 21:12:07 +00:00
configs [ARM] 3306/1: S3C24XX - update defconfig 2006-02-08 21:09:07 +00:00
kernel [ARM] CONFIG_CPU_MPCORE -> CONFIG_CPU_32v6K 2006-02-22 21:13:28 +00:00
lib [ARM] 3104/1: ARM EABI: new helper function names 2006-01-14 16:18:29 +00:00
mach-aaec2000 [ARM] 3260/1: remove phys_ram from struct machine_desc (part 2) 2006-01-13 20:51:52 +00:00
mach-at91rm9200 [ARM] 3325/2: GPIO function to control multi-drive (open collector) capability 2006-02-22 21:23:35 +00:00
mach-clps711x [ARM] 3304/1: Add help descriptions to ARCH config items that don't have one 2006-02-08 21:09:05 +00:00
mach-clps7500 [ARM] 3260/1: remove phys_ram from struct machine_desc (part 2) 2006-01-13 20:51:52 +00:00
mach-ebsa110 [ARM] 3260/1: remove phys_ram from struct machine_desc (part 2) 2006-01-13 20:51:52 +00:00
mach-footbridge [ARM] 3260/1: remove phys_ram from struct machine_desc (part 2) 2006-01-13 20:51:52 +00:00
mach-h720x [ARM] 3260/1: remove phys_ram from struct machine_desc (part 2) 2006-01-13 20:51:52 +00:00
mach-imx [SERIAL] Remove unnecessary serial.h include 2006-02-05 11:11:20 +00:00
mach-integrator [ARM] Fix SMP initialisation oops 2006-02-16 11:08:09 +00:00
mach-iop3xx [ARM] remove duplicate #includes 2006-02-15 10:13:02 +00:00
mach-ixp4xx [ARM] 3344/1: NSLU2: beeper support 2006-02-22 21:12:06 +00:00
mach-ixp2000 [ARM] 3302/1: make pci=firmware the default for ixp2000 2006-02-08 21:09:04 +00:00
mach-l7200 [ARM] 3260/1: remove phys_ram from struct machine_desc (part 2) 2006-01-13 20:51:52 +00:00
mach-lh7a40x [ARM] 3260/1: remove phys_ram from struct machine_desc (part 2) 2006-01-13 20:51:52 +00:00
mach-omap1 [ARM] 3280/1: OMAP: 2/3 Fix low-level io init for omap1 boards 2006-02-08 22:06:46 +00:00
mach-omap2 [ARM] 3278/1: OMAP: 3/3 Fix low-level io init for omap2 boards 2006-02-08 22:06:47 +00:00
mach-pxa [ARM] 3291/1: PXA27x: Correct get_clk_frequency_khz turbo flag handling 2006-02-01 19:25:59 +00:00
mach-realview [ARM] Fix SMP initialisation oops 2006-02-16 11:08:09 +00:00
mach-rpc [ARM] 3260/1: remove phys_ram from struct machine_desc (part 2) 2006-01-13 20:51:52 +00:00
mach-s3c2410 [ARM] 3326/1: H1940 - Control latches 2006-02-10 22:40:51 +00:00
mach-sa1100 [ARM] 3260/1: remove phys_ram from struct machine_desc (part 2) 2006-01-13 20:51:52 +00:00
mach-shark [ARM] 3260/1: remove phys_ram from struct machine_desc (part 2) 2006-01-13 20:51:52 +00:00
mach-versatile [ARM] 3340/1: Fix the PCI setup for direct master access to SDRAM 2006-02-22 19:51:38 +00:00
mm [ARM] CONFIG_CPU_MPCORE -> CONFIG_CPU_32v6K 2006-02-22 21:13:28 +00:00
nwfpe [ARM] 3111/2: old ABI compat: adjust NWFPE to be operational within an EABI kernel 2006-01-14 16:36:50 +00:00
oprofile [ARM] 3295/1: Fix oprofile init return value 2006-02-01 21:07:28 +00:00
plat-omap [ARM] remove duplicate #includes 2006-02-15 10:13:02 +00:00
tools [ARM] Update mach-types 2006-02-22 09:33:23 +00:00
vfp kbuild: arm - use generic asm-offsets.h support 2005-09-09 21:08:59 +02:00
Kconfig Merge master.kernel.org:/home/rmk/linux-2.6-arm 2006-02-08 15:20:40 -08:00
Kconfig.debug [ARM] Fix typo in arch/arm/Kconfig.debug 2005-09-09 15:57:17 +01:00
Makefile [ARM] 3107/3: ARM EABI: last bits to configure it 2006-01-14 16:33:50 +00:00