643 lines
14 KiB
C
643 lines
14 KiB
C
/*
|
|
* Sun3 SCSI stuff by Erik Verbruggen (erik@bigmama.xtdnet.nl)
|
|
*
|
|
* Sun3 DMA routines added by Sam Creasey (sammy@sammy.net)
|
|
*
|
|
* Adapted from mac_scsinew.c:
|
|
*/
|
|
/*
|
|
* Generic Macintosh NCR5380 driver
|
|
*
|
|
* Copyright 1998, Michael Schmitz <mschmitz@lbl.gov>
|
|
*
|
|
* derived in part from:
|
|
*/
|
|
/*
|
|
* Generic Generic NCR5380 driver
|
|
*
|
|
* Copyright 1995, Russell King
|
|
*
|
|
* ALPHA RELEASE 1.
|
|
*
|
|
* For more information, please consult
|
|
*
|
|
* NCR 5380 Family
|
|
* SCSI Protocol Controller
|
|
* Databook
|
|
*
|
|
* NCR Microelectronics
|
|
* 1635 Aeroplaza Drive
|
|
* Colorado Springs, CO 80916
|
|
* 1+ (719) 578-3400
|
|
* 1+ (800) 334-5454
|
|
*/
|
|
|
|
|
|
/*
|
|
* This is from mac_scsi.h, but hey, maybe this is useful for Sun3 too! :)
|
|
*
|
|
* Options :
|
|
*
|
|
* PARITY - enable parity checking. Not supported.
|
|
*
|
|
* SCSI2 - enable support for SCSI-II tagged queueing. Untested.
|
|
*
|
|
* USLEEP - enable support for devices that don't disconnect. Untested.
|
|
*/
|
|
|
|
/*
|
|
* $Log: sun3_NCR5380.c,v $
|
|
*/
|
|
|
|
#define AUTOSENSE
|
|
|
|
#include <linux/types.h>
|
|
#include <linux/stddef.h>
|
|
#include <linux/ctype.h>
|
|
#include <linux/delay.h>
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/signal.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/init.h>
|
|
#include <linux/blkdev.h>
|
|
|
|
#include <asm/io.h>
|
|
#include <asm/system.h>
|
|
|
|
#include <asm/sun3ints.h>
|
|
#include <asm/dvma.h>
|
|
#include <asm/idprom.h>
|
|
#include <asm/machines.h>
|
|
|
|
/* dma on! */
|
|
#define REAL_DMA
|
|
|
|
#include "scsi.h"
|
|
#include "initio.h"
|
|
#include <scsi/scsi_host.h>
|
|
#include "sun3_scsi.h"
|
|
|
|
static void NCR5380_print(struct Scsi_Host *instance);
|
|
|
|
/* #define OLDDMA */
|
|
|
|
#define USE_WRAPPER
|
|
/*#define RESET_BOOT */
|
|
#define DRIVER_SETUP
|
|
|
|
#define NDEBUG 0
|
|
|
|
/*
|
|
* BUG can be used to trigger a strange code-size related hang on 2.1 kernels
|
|
*/
|
|
#ifdef BUG
|
|
#undef RESET_BOOT
|
|
#undef DRIVER_SETUP
|
|
#endif
|
|
|
|
/* #define SUPPORT_TAGS */
|
|
|
|
#define ENABLE_IRQ() enable_irq( IRQ_SUN3_SCSI );
|
|
|
|
|
|
static irqreturn_t scsi_sun3_intr(int irq, void *dummy);
|
|
static inline unsigned char sun3scsi_read(int reg);
|
|
static inline void sun3scsi_write(int reg, int value);
|
|
|
|
static int setup_can_queue = -1;
|
|
module_param(setup_can_queue, int, 0);
|
|
static int setup_cmd_per_lun = -1;
|
|
module_param(setup_cmd_per_lun, int, 0);
|
|
static int setup_sg_tablesize = -1;
|
|
module_param(setup_sg_tablesize, int, 0);
|
|
#ifdef SUPPORT_TAGS
|
|
static int setup_use_tagged_queuing = -1;
|
|
module_param(setup_use_tagged_queuing, int, 0);
|
|
#endif
|
|
static int setup_hostid = -1;
|
|
module_param(setup_hostid, int, 0);
|
|
|
|
static struct scsi_cmnd *sun3_dma_setup_done = NULL;
|
|
|
|
#define AFTER_RESET_DELAY (HZ/2)
|
|
|
|
/* ms to wait after hitting dma regs */
|
|
#define SUN3_DMA_DELAY 10
|
|
|
|
/* dvma buffer to allocate -- 32k should hopefully be more than sufficient */
|
|
#define SUN3_DVMA_BUFSIZE 0xe000
|
|
|
|
/* minimum number of bytes to do dma on */
|
|
#define SUN3_DMA_MINSIZE 128
|
|
|
|
static volatile unsigned char *sun3_scsi_regp;
|
|
static volatile struct sun3_dma_regs *dregs;
|
|
#ifdef OLDDMA
|
|
static unsigned char *dmabuf = NULL; /* dma memory buffer */
|
|
#endif
|
|
static struct sun3_udc_regs *udc_regs = NULL;
|
|
static unsigned char *sun3_dma_orig_addr = NULL;
|
|
static unsigned long sun3_dma_orig_count = 0;
|
|
static int sun3_dma_active = 0;
|
|
static unsigned long last_residual = 0;
|
|
|
|
/*
|
|
* NCR 5380 register access functions
|
|
*/
|
|
|
|
static inline unsigned char sun3scsi_read(int reg)
|
|
{
|
|
return( sun3_scsi_regp[reg] );
|
|
}
|
|
|
|
static inline void sun3scsi_write(int reg, int value)
|
|
{
|
|
sun3_scsi_regp[reg] = value;
|
|
}
|
|
|
|
/* dma controller register access functions */
|
|
|
|
static inline unsigned short sun3_udc_read(unsigned char reg)
|
|
{
|
|
unsigned short ret;
|
|
|
|
dregs->udc_addr = UDC_CSR;
|
|
udelay(SUN3_DMA_DELAY);
|
|
ret = dregs->udc_data;
|
|
udelay(SUN3_DMA_DELAY);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static inline void sun3_udc_write(unsigned short val, unsigned char reg)
|
|
{
|
|
dregs->udc_addr = reg;
|
|
udelay(SUN3_DMA_DELAY);
|
|
dregs->udc_data = val;
|
|
udelay(SUN3_DMA_DELAY);
|
|
}
|
|
|
|
/*
|
|
* XXX: status debug
|
|
*/
|
|
static struct Scsi_Host *default_instance;
|
|
|
|
/*
|
|
* Function : int sun3scsi_detect(struct scsi_host_template * tpnt)
|
|
*
|
|
* Purpose : initializes mac NCR5380 driver based on the
|
|
* command line / compile time port and irq definitions.
|
|
*
|
|
* Inputs : tpnt - template for this SCSI adapter.
|
|
*
|
|
* Returns : 1 if a host adapter was found, 0 if not.
|
|
*
|
|
*/
|
|
|
|
int sun3scsi_detect(struct scsi_host_template * tpnt)
|
|
{
|
|
unsigned long ioaddr;
|
|
static int called = 0;
|
|
struct Scsi_Host *instance;
|
|
|
|
/* check that this machine has an onboard 5380 */
|
|
switch(idprom->id_machtype) {
|
|
case SM_SUN3|SM_3_50:
|
|
case SM_SUN3|SM_3_60:
|
|
break;
|
|
|
|
default:
|
|
return 0;
|
|
}
|
|
|
|
if(called)
|
|
return 0;
|
|
|
|
tpnt->proc_name = "Sun3 5380 SCSI";
|
|
|
|
/* setup variables */
|
|
tpnt->can_queue =
|
|
(setup_can_queue > 0) ? setup_can_queue : CAN_QUEUE;
|
|
tpnt->cmd_per_lun =
|
|
(setup_cmd_per_lun > 0) ? setup_cmd_per_lun : CMD_PER_LUN;
|
|
tpnt->sg_tablesize =
|
|
(setup_sg_tablesize >= 0) ? setup_sg_tablesize : SG_TABLESIZE;
|
|
|
|
if (setup_hostid >= 0)
|
|
tpnt->this_id = setup_hostid;
|
|
else {
|
|
/* use 7 as default */
|
|
tpnt->this_id = 7;
|
|
}
|
|
|
|
ioaddr = (unsigned long)ioremap(IOBASE_SUN3_SCSI, PAGE_SIZE);
|
|
sun3_scsi_regp = (unsigned char *)ioaddr;
|
|
|
|
dregs = (struct sun3_dma_regs *)(((unsigned char *)ioaddr) + 8);
|
|
|
|
if((udc_regs = dvma_malloc(sizeof(struct sun3_udc_regs)))
|
|
== NULL) {
|
|
printk("SUN3 Scsi couldn't allocate DVMA memory!\n");
|
|
return 0;
|
|
}
|
|
#ifdef OLDDMA
|
|
if((dmabuf = dvma_malloc_align(SUN3_DVMA_BUFSIZE, 0x10000)) == NULL) {
|
|
printk("SUN3 Scsi couldn't allocate DVMA memory!\n");
|
|
return 0;
|
|
}
|
|
#endif
|
|
#ifdef SUPPORT_TAGS
|
|
if (setup_use_tagged_queuing < 0)
|
|
setup_use_tagged_queuing = USE_TAGGED_QUEUING;
|
|
#endif
|
|
|
|
instance = scsi_register (tpnt, sizeof(struct NCR5380_hostdata));
|
|
if(instance == NULL)
|
|
return 0;
|
|
|
|
default_instance = instance;
|
|
|
|
instance->io_port = (unsigned long) ioaddr;
|
|
instance->irq = IRQ_SUN3_SCSI;
|
|
|
|
NCR5380_init(instance, 0);
|
|
|
|
instance->n_io_port = 32;
|
|
|
|
((struct NCR5380_hostdata *)instance->hostdata)->ctrl = 0;
|
|
|
|
if (request_irq(instance->irq, scsi_sun3_intr,
|
|
0, "Sun3SCSI-5380", instance)) {
|
|
#ifndef REAL_DMA
|
|
printk("scsi%d: IRQ%d not free, interrupts disabled\n",
|
|
instance->host_no, instance->irq);
|
|
instance->irq = SCSI_IRQ_NONE;
|
|
#else
|
|
printk("scsi%d: IRQ%d not free, bailing out\n",
|
|
instance->host_no, instance->irq);
|
|
return 0;
|
|
#endif
|
|
}
|
|
|
|
printk("scsi%d: Sun3 5380 at port %lX irq", instance->host_no, instance->io_port);
|
|
if (instance->irq == SCSI_IRQ_NONE)
|
|
printk ("s disabled");
|
|
else
|
|
printk (" %d", instance->irq);
|
|
printk(" options CAN_QUEUE=%d CMD_PER_LUN=%d release=%d",
|
|
instance->can_queue, instance->cmd_per_lun,
|
|
SUN3SCSI_PUBLIC_RELEASE);
|
|
printk("\nscsi%d:", instance->host_no);
|
|
NCR5380_print_options(instance);
|
|
printk("\n");
|
|
|
|
dregs->csr = 0;
|
|
udelay(SUN3_DMA_DELAY);
|
|
dregs->csr = CSR_SCSI | CSR_FIFO | CSR_INTR;
|
|
udelay(SUN3_DMA_DELAY);
|
|
dregs->fifo_count = 0;
|
|
|
|
called = 1;
|
|
|
|
#ifdef RESET_BOOT
|
|
sun3_scsi_reset_boot(instance);
|
|
#endif
|
|
|
|
return 1;
|
|
}
|
|
|
|
int sun3scsi_release (struct Scsi_Host *shpnt)
|
|
{
|
|
if (shpnt->irq != SCSI_IRQ_NONE)
|
|
free_irq(shpnt->irq, shpnt);
|
|
|
|
iounmap((void *)sun3_scsi_regp);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef RESET_BOOT
|
|
/*
|
|
* Our 'bus reset on boot' function
|
|
*/
|
|
|
|
static void sun3_scsi_reset_boot(struct Scsi_Host *instance)
|
|
{
|
|
unsigned long end;
|
|
|
|
NCR5380_local_declare();
|
|
NCR5380_setup(instance);
|
|
|
|
/*
|
|
* Do a SCSI reset to clean up the bus during initialization. No
|
|
* messing with the queues, interrupts, or locks necessary here.
|
|
*/
|
|
|
|
printk( "Sun3 SCSI: resetting the SCSI bus..." );
|
|
|
|
/* switch off SCSI IRQ - catch an interrupt without IRQ bit set else */
|
|
// sun3_disable_irq( IRQ_SUN3_SCSI );
|
|
|
|
/* get in phase */
|
|
NCR5380_write( TARGET_COMMAND_REG,
|
|
PHASE_SR_TO_TCR( NCR5380_read(STATUS_REG) ));
|
|
|
|
/* assert RST */
|
|
NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE | ICR_ASSERT_RST );
|
|
|
|
/* The min. reset hold time is 25us, so 40us should be enough */
|
|
udelay( 50 );
|
|
|
|
/* reset RST and interrupt */
|
|
NCR5380_write( INITIATOR_COMMAND_REG, ICR_BASE );
|
|
NCR5380_read( RESET_PARITY_INTERRUPT_REG );
|
|
|
|
for( end = jiffies + AFTER_RESET_DELAY; time_before(jiffies, end); )
|
|
barrier();
|
|
|
|
/* switch on SCSI IRQ again */
|
|
// sun3_enable_irq( IRQ_SUN3_SCSI );
|
|
|
|
printk( " done\n" );
|
|
}
|
|
#endif
|
|
|
|
const char * sun3scsi_info (struct Scsi_Host *spnt) {
|
|
return "";
|
|
}
|
|
|
|
// safe bits for the CSR
|
|
#define CSR_GOOD 0x060f
|
|
|
|
static irqreturn_t scsi_sun3_intr(int irq, void *dummy)
|
|
{
|
|
unsigned short csr = dregs->csr;
|
|
int handled = 0;
|
|
|
|
if(csr & ~CSR_GOOD) {
|
|
if(csr & CSR_DMA_BUSERR) {
|
|
printk("scsi%d: bus error in dma\n", default_instance->host_no);
|
|
}
|
|
|
|
if(csr & CSR_DMA_CONFLICT) {
|
|
printk("scsi%d: dma conflict\n", default_instance->host_no);
|
|
}
|
|
handled = 1;
|
|
}
|
|
|
|
if(csr & (CSR_SDB_INT | CSR_DMA_INT)) {
|
|
NCR5380_intr(irq, dummy);
|
|
handled = 1;
|
|
}
|
|
|
|
return IRQ_RETVAL(handled);
|
|
}
|
|
|
|
/*
|
|
* Debug stuff - to be called on NMI, or sysrq key. Use at your own risk;
|
|
* reentering NCR5380_print_status seems to have ugly side effects
|
|
*/
|
|
|
|
/* this doesn't seem to get used at all -- sam */
|
|
#if 0
|
|
void sun3_sun3_debug (void)
|
|
{
|
|
unsigned long flags;
|
|
NCR5380_local_declare();
|
|
|
|
if (default_instance) {
|
|
local_irq_save(flags);
|
|
NCR5380_print_status(default_instance);
|
|
local_irq_restore(flags);
|
|
}
|
|
}
|
|
#endif
|
|
|
|
|
|
/* sun3scsi_dma_setup() -- initialize the dma controller for a read/write */
|
|
static unsigned long sun3scsi_dma_setup(void *data, unsigned long count, int write_flag)
|
|
{
|
|
#ifdef OLDDMA
|
|
if(write_flag)
|
|
memcpy(dmabuf, data, count);
|
|
else {
|
|
sun3_dma_orig_addr = data;
|
|
sun3_dma_orig_count = count;
|
|
}
|
|
#else
|
|
void *addr;
|
|
|
|
if(sun3_dma_orig_addr != NULL)
|
|
dvma_unmap(sun3_dma_orig_addr);
|
|
|
|
// addr = sun3_dvma_page((unsigned long)data, (unsigned long)dmabuf);
|
|
addr = (void *)dvma_map((unsigned long) data, count);
|
|
|
|
sun3_dma_orig_addr = addr;
|
|
sun3_dma_orig_count = count;
|
|
#endif
|
|
dregs->fifo_count = 0;
|
|
sun3_udc_write(UDC_RESET, UDC_CSR);
|
|
|
|
/* reset fifo */
|
|
dregs->csr &= ~CSR_FIFO;
|
|
dregs->csr |= CSR_FIFO;
|
|
|
|
/* set direction */
|
|
if(write_flag)
|
|
dregs->csr |= CSR_SEND;
|
|
else
|
|
dregs->csr &= ~CSR_SEND;
|
|
|
|
/* byte count for fifo */
|
|
dregs->fifo_count = count;
|
|
|
|
sun3_udc_write(UDC_RESET, UDC_CSR);
|
|
|
|
/* reset fifo */
|
|
dregs->csr &= ~CSR_FIFO;
|
|
dregs->csr |= CSR_FIFO;
|
|
|
|
if(dregs->fifo_count != count) {
|
|
printk("scsi%d: fifo_mismatch %04x not %04x\n",
|
|
default_instance->host_no, dregs->fifo_count,
|
|
(unsigned int) count);
|
|
NCR5380_print(default_instance);
|
|
}
|
|
|
|
/* setup udc */
|
|
#ifdef OLDDMA
|
|
udc_regs->addr_hi = ((dvma_vtob(dmabuf) & 0xff0000) >> 8);
|
|
udc_regs->addr_lo = (dvma_vtob(dmabuf) & 0xffff);
|
|
#else
|
|
udc_regs->addr_hi = (((unsigned long)(addr) & 0xff0000) >> 8);
|
|
udc_regs->addr_lo = ((unsigned long)(addr) & 0xffff);
|
|
#endif
|
|
udc_regs->count = count/2; /* count in words */
|
|
udc_regs->mode_hi = UDC_MODE_HIWORD;
|
|
if(write_flag) {
|
|
if(count & 1)
|
|
udc_regs->count++;
|
|
udc_regs->mode_lo = UDC_MODE_LSEND;
|
|
udc_regs->rsel = UDC_RSEL_SEND;
|
|
} else {
|
|
udc_regs->mode_lo = UDC_MODE_LRECV;
|
|
udc_regs->rsel = UDC_RSEL_RECV;
|
|
}
|
|
|
|
/* announce location of regs block */
|
|
sun3_udc_write(((dvma_vtob(udc_regs) & 0xff0000) >> 8),
|
|
UDC_CHN_HI);
|
|
|
|
sun3_udc_write((dvma_vtob(udc_regs) & 0xffff), UDC_CHN_LO);
|
|
|
|
/* set dma master on */
|
|
sun3_udc_write(0xd, UDC_MODE);
|
|
|
|
/* interrupt enable */
|
|
sun3_udc_write(UDC_INT_ENABLE, UDC_CSR);
|
|
|
|
return count;
|
|
|
|
}
|
|
|
|
static inline unsigned long sun3scsi_dma_count(struct Scsi_Host *instance)
|
|
{
|
|
unsigned short resid;
|
|
|
|
dregs->udc_addr = 0x32;
|
|
udelay(SUN3_DMA_DELAY);
|
|
resid = dregs->udc_data;
|
|
udelay(SUN3_DMA_DELAY);
|
|
resid *= 2;
|
|
|
|
return (unsigned long) resid;
|
|
}
|
|
|
|
static inline unsigned long sun3scsi_dma_residual(struct Scsi_Host *instance)
|
|
{
|
|
return last_residual;
|
|
}
|
|
|
|
static inline unsigned long sun3scsi_dma_xfer_len(unsigned long wanted,
|
|
struct scsi_cmnd *cmd,
|
|
int write_flag)
|
|
{
|
|
if (cmd->request->cmd_type == REQ_TYPE_FS)
|
|
return wanted;
|
|
else
|
|
return 0;
|
|
}
|
|
|
|
static inline int sun3scsi_dma_start(unsigned long count, unsigned char *data)
|
|
{
|
|
|
|
sun3_udc_write(UDC_CHN_START, UDC_CSR);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* clean up after our dma is done */
|
|
static int sun3scsi_dma_finish(int write_flag)
|
|
{
|
|
unsigned short count;
|
|
unsigned short fifo;
|
|
int ret = 0;
|
|
|
|
sun3_dma_active = 0;
|
|
#if 1
|
|
// check to empty the fifo on a read
|
|
if(!write_flag) {
|
|
int tmo = 20000; /* .2 sec */
|
|
|
|
while(1) {
|
|
if(dregs->csr & CSR_FIFO_EMPTY)
|
|
break;
|
|
|
|
if(--tmo <= 0) {
|
|
printk("sun3scsi: fifo failed to empty!\n");
|
|
return 1;
|
|
}
|
|
udelay(10);
|
|
}
|
|
}
|
|
|
|
#endif
|
|
|
|
count = sun3scsi_dma_count(default_instance);
|
|
#ifdef OLDDMA
|
|
|
|
/* if we've finished a read, copy out the data we read */
|
|
if(sun3_dma_orig_addr) {
|
|
/* check for residual bytes after dma end */
|
|
if(count && (NCR5380_read(BUS_AND_STATUS_REG) &
|
|
(BASR_PHASE_MATCH | BASR_ACK))) {
|
|
printk("scsi%d: sun3_scsi_finish: read overrun baby... ", default_instance->host_no);
|
|
printk("basr now %02x\n", NCR5380_read(BUS_AND_STATUS_REG));
|
|
ret = count;
|
|
}
|
|
|
|
/* copy in what we dma'd no matter what */
|
|
memcpy(sun3_dma_orig_addr, dmabuf, sun3_dma_orig_count);
|
|
sun3_dma_orig_addr = NULL;
|
|
|
|
}
|
|
#else
|
|
|
|
fifo = dregs->fifo_count;
|
|
last_residual = fifo;
|
|
|
|
/* empty bytes from the fifo which didn't make it */
|
|
if((!write_flag) && (count - fifo) == 2) {
|
|
unsigned short data;
|
|
unsigned char *vaddr;
|
|
|
|
data = dregs->fifo_data;
|
|
vaddr = (unsigned char *)dvma_btov(sun3_dma_orig_addr);
|
|
|
|
vaddr += (sun3_dma_orig_count - fifo);
|
|
|
|
vaddr[-2] = (data & 0xff00) >> 8;
|
|
vaddr[-1] = (data & 0xff);
|
|
}
|
|
|
|
dvma_unmap(sun3_dma_orig_addr);
|
|
sun3_dma_orig_addr = NULL;
|
|
#endif
|
|
sun3_udc_write(UDC_RESET, UDC_CSR);
|
|
dregs->fifo_count = 0;
|
|
dregs->csr &= ~CSR_SEND;
|
|
|
|
/* reset fifo */
|
|
dregs->csr &= ~CSR_FIFO;
|
|
dregs->csr |= CSR_FIFO;
|
|
|
|
sun3_dma_setup_done = NULL;
|
|
|
|
return ret;
|
|
|
|
}
|
|
|
|
#include "sun3_NCR5380.c"
|
|
|
|
static struct scsi_host_template driver_template = {
|
|
.name = SUN3_SCSI_NAME,
|
|
.detect = sun3scsi_detect,
|
|
.release = sun3scsi_release,
|
|
.info = sun3scsi_info,
|
|
.queuecommand = sun3scsi_queue_command,
|
|
.eh_abort_handler = sun3scsi_abort,
|
|
.eh_bus_reset_handler = sun3scsi_bus_reset,
|
|
.can_queue = CAN_QUEUE,
|
|
.this_id = 7,
|
|
.sg_tablesize = SG_TABLESIZE,
|
|
.cmd_per_lun = CMD_PER_LUN,
|
|
.use_clustering = DISABLE_CLUSTERING
|
|
};
|
|
|
|
|
|
#include "scsi_module.c"
|
|
|
|
MODULE_LICENSE("GPL");
|