574 lines
13 KiB
C
574 lines
13 KiB
C
/* Hey EMACS -*- linux-c -*-
|
|
*
|
|
* tipar - low level driver for handling a parallel link cable designed
|
|
* for Texas Instruments graphing calculators (http://lpg.ticalc.org).
|
|
* A part of the TiLP project.
|
|
*
|
|
* Copyright (C) 2000-2002, Romain Lievin <roms@lpg.ticalc.org>
|
|
* under the terms of the GNU General Public License.
|
|
*
|
|
* Various fixes & clean-up from the Linux Kernel Mailing List
|
|
* (Alan Cox, Richard B. Johnson, Christoph Hellwig).
|
|
*/
|
|
|
|
/* This driver should, in theory, work with any parallel port that has an
|
|
* appropriate low-level driver; all I/O is done through the parport
|
|
* abstraction layer.
|
|
*
|
|
* If this driver is built into the kernel, you can configure it using the
|
|
* kernel command-line. For example:
|
|
*
|
|
* tipar=timeout,delay (set timeout and delay)
|
|
*
|
|
* If the driver is loaded as a module, similar functionality is available
|
|
* using module parameters. The equivalent of the above commands would be:
|
|
*
|
|
* # insmod tipar timeout=15 delay=10
|
|
*/
|
|
|
|
/* COMPATIBILITY WITH OLD KERNELS
|
|
*
|
|
* Usually, parallel cables were bound to ports at
|
|
* particular I/O addresses, as follows:
|
|
*
|
|
* tipar0 0x378
|
|
* tipar1 0x278
|
|
* tipar2 0x3bc
|
|
*
|
|
*
|
|
* This driver, by default, binds tipar devices according to parport and
|
|
* the minor number.
|
|
*
|
|
*/
|
|
#undef DEBUG /* change to #define to get debugging
|
|
* output - for pr_debug() */
|
|
#include <linux/config.h>
|
|
#include <linux/module.h>
|
|
#include <linux/types.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/sched.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/fcntl.h>
|
|
#include <linux/fs.h>
|
|
#include <linux/init.h>
|
|
#include <asm/uaccess.h>
|
|
#include <linux/ioport.h>
|
|
#include <asm/io.h>
|
|
#include <linux/bitops.h>
|
|
#include <linux/devfs_fs_kernel.h> /* DevFs support */
|
|
#include <linux/parport.h> /* Our code depend on parport */
|
|
#include <linux/device.h>
|
|
|
|
/*
|
|
* TI definitions
|
|
*/
|
|
#include <linux/ticable.h>
|
|
|
|
/*
|
|
* Version Information
|
|
*/
|
|
#define DRIVER_VERSION "1.19"
|
|
#define DRIVER_AUTHOR "Romain Lievin <roms@lpg.ticalc.org>"
|
|
#define DRIVER_DESC "Device driver for TI/PC parallel link cables"
|
|
#define DRIVER_LICENSE "GPL"
|
|
|
|
#define VERSION(ver,rel,seq) (((ver)<<16) | ((rel)<<8) | (seq))
|
|
|
|
/* ----- global variables --------------------------------------------- */
|
|
|
|
struct tipar_struct {
|
|
struct pardevice *dev; /* Parport device entry */
|
|
};
|
|
|
|
#define PP_NO 3
|
|
static struct tipar_struct table[PP_NO];
|
|
|
|
static int delay = IO_DELAY; /* inter-bit delay in microseconds */
|
|
static int timeout = TIMAXTIME; /* timeout in tenth of seconds */
|
|
|
|
static unsigned int tp_count; /* tipar count */
|
|
static unsigned long opened; /* opened devices */
|
|
|
|
static struct class *tipar_class;
|
|
|
|
/* --- macros for parport access -------------------------------------- */
|
|
|
|
#define r_dtr(x) (parport_read_data(table[(x)].dev->port))
|
|
#define r_str(x) (parport_read_status(table[(x)].dev->port))
|
|
#define w_ctr(x,y) (parport_write_control(table[(x)].dev->port, (y)))
|
|
#define w_dtr(x,y) (parport_write_data(table[(x)].dev->port, (y)))
|
|
|
|
/* --- setting states on the D-bus with the right timing: ------------- */
|
|
|
|
static inline void
|
|
outbyte(int value, int minor)
|
|
{
|
|
w_dtr(minor, value);
|
|
}
|
|
|
|
static inline int
|
|
inbyte(int minor)
|
|
{
|
|
return (r_str(minor));
|
|
}
|
|
|
|
static inline void
|
|
init_ti_parallel(int minor)
|
|
{
|
|
outbyte(3, minor);
|
|
}
|
|
|
|
/* ----- global defines ----------------------------------------------- */
|
|
|
|
#define START(x) { x = jiffies + (HZ * timeout) / 10; }
|
|
#define WAIT(x) { \
|
|
if (time_before((x), jiffies)) return -1; \
|
|
if (need_resched()) schedule(); }
|
|
|
|
/* ----- D-bus bit-banging functions ---------------------------------- */
|
|
|
|
/* D-bus protocol (45kbit/s max):
|
|
1 0 0
|
|
_______ ______|______ __________|________ __________
|
|
Red : ________ | ____ | ____
|
|
_ ____________|________ ______|__________ _____
|
|
White: ________ | ______ | _______
|
|
*/
|
|
|
|
/* Try to transmit a byte on the specified port (-1 if error). */
|
|
static int
|
|
put_ti_parallel(int minor, unsigned char data)
|
|
{
|
|
unsigned int bit;
|
|
unsigned long max;
|
|
|
|
for (bit = 0; bit < 8; bit++) {
|
|
if (data & 1) {
|
|
outbyte(2, minor);
|
|
START(max);
|
|
do {
|
|
WAIT(max);
|
|
} while (inbyte(minor) & 0x10);
|
|
|
|
outbyte(3, minor);
|
|
START(max);
|
|
do {
|
|
WAIT(max);
|
|
} while (!(inbyte(minor) & 0x10));
|
|
} else {
|
|
outbyte(1, minor);
|
|
START(max);
|
|
do {
|
|
WAIT(max);
|
|
} while (inbyte(minor) & 0x20);
|
|
|
|
outbyte(3, minor);
|
|
START(max);
|
|
do {
|
|
WAIT(max);
|
|
} while (!(inbyte(minor) & 0x20));
|
|
}
|
|
|
|
data >>= 1;
|
|
udelay(delay);
|
|
|
|
if (need_resched())
|
|
schedule();
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* Receive a byte on the specified port or -1 if error. */
|
|
static int
|
|
get_ti_parallel(int minor)
|
|
{
|
|
unsigned int bit;
|
|
unsigned char v, data = 0;
|
|
unsigned long max;
|
|
|
|
for (bit = 0; bit < 8; bit++) {
|
|
START(max);
|
|
do {
|
|
WAIT(max);
|
|
} while ((v = inbyte(minor) & 0x30) == 0x30);
|
|
|
|
if (v == 0x10) {
|
|
data = (data >> 1) | 0x80;
|
|
outbyte(1, minor);
|
|
START(max);
|
|
do {
|
|
WAIT(max);
|
|
} while (!(inbyte(minor) & 0x20));
|
|
outbyte(3, minor);
|
|
} else {
|
|
data = data >> 1;
|
|
outbyte(2, minor);
|
|
START(max);
|
|
do {
|
|
WAIT(max);
|
|
} while (!(inbyte(minor) & 0x10));
|
|
outbyte(3, minor);
|
|
}
|
|
|
|
udelay(delay);
|
|
if (need_resched())
|
|
schedule();
|
|
}
|
|
|
|
return (int) data;
|
|
}
|
|
|
|
/* Try to detect a parallel link cable on the specified port */
|
|
static int
|
|
probe_ti_parallel(int minor)
|
|
{
|
|
int i;
|
|
int seq[] = { 0x00, 0x20, 0x10, 0x30 };
|
|
|
|
for (i = 3; i >= 0; i--) {
|
|
outbyte(3, minor);
|
|
outbyte(i, minor);
|
|
udelay(delay);
|
|
pr_debug("tipar: Probing -> %i: 0x%02x 0x%02x\n", i,
|
|
data & 0x30, seq[i]);
|
|
if ((inbyte(minor) & 0x30) != seq[i]) {
|
|
outbyte(3, minor);
|
|
return -1;
|
|
}
|
|
}
|
|
|
|
outbyte(3, minor);
|
|
return 0;
|
|
}
|
|
|
|
/* ----- kernel module functions--------------------------------------- */
|
|
|
|
static int
|
|
tipar_open(struct inode *inode, struct file *file)
|
|
{
|
|
unsigned int minor = iminor(inode) - TIPAR_MINOR;
|
|
|
|
if (tp_count == 0 || minor > tp_count - 1)
|
|
return -ENXIO;
|
|
|
|
if (test_and_set_bit(minor, &opened))
|
|
return -EBUSY;
|
|
|
|
if (!table[minor].dev) {
|
|
printk(KERN_ERR "%s: NULL device for minor %u\n",
|
|
__FUNCTION__, minor);
|
|
return -ENXIO;
|
|
}
|
|
parport_claim_or_block(table[minor].dev);
|
|
init_ti_parallel(minor);
|
|
parport_release(table[minor].dev);
|
|
|
|
return nonseekable_open(inode, file);
|
|
}
|
|
|
|
static int
|
|
tipar_close(struct inode *inode, struct file *file)
|
|
{
|
|
unsigned int minor = iminor(inode) - TIPAR_MINOR;
|
|
|
|
if (minor > tp_count - 1)
|
|
return -ENXIO;
|
|
|
|
clear_bit(minor, &opened);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static ssize_t
|
|
tipar_write (struct file *file, const char __user *buf, size_t count,
|
|
loff_t * ppos)
|
|
{
|
|
unsigned int minor = iminor(file->f_dentry->d_inode) - TIPAR_MINOR;
|
|
ssize_t n;
|
|
|
|
parport_claim_or_block(table[minor].dev);
|
|
|
|
for (n = 0; n < count; n++) {
|
|
unsigned char b;
|
|
|
|
if (get_user(b, buf + n)) {
|
|
n = -EFAULT;
|
|
goto out;
|
|
}
|
|
|
|
if (put_ti_parallel(minor, b) == -1) {
|
|
init_ti_parallel(minor);
|
|
n = -ETIMEDOUT;
|
|
goto out;
|
|
}
|
|
}
|
|
out:
|
|
parport_release(table[minor].dev);
|
|
return n;
|
|
}
|
|
|
|
static ssize_t
|
|
tipar_read(struct file *file, char __user *buf, size_t count, loff_t * ppos)
|
|
{
|
|
int b = 0;
|
|
unsigned int minor = iminor(file->f_dentry->d_inode) - TIPAR_MINOR;
|
|
ssize_t retval = 0;
|
|
ssize_t n = 0;
|
|
|
|
if (count == 0)
|
|
return 0;
|
|
|
|
parport_claim_or_block(table[minor].dev);
|
|
|
|
while (n < count) {
|
|
b = get_ti_parallel(minor);
|
|
if (b == -1) {
|
|
init_ti_parallel(minor);
|
|
retval = -ETIMEDOUT;
|
|
goto out;
|
|
} else {
|
|
if (put_user(b, buf + n)) {
|
|
retval = -EFAULT;
|
|
break;
|
|
} else
|
|
retval = ++n;
|
|
}
|
|
|
|
/* Non-blocking mode : try again ! */
|
|
if (file->f_flags & O_NONBLOCK) {
|
|
retval = -EAGAIN;
|
|
goto out;
|
|
}
|
|
|
|
/* Signal pending, try again ! */
|
|
if (signal_pending(current)) {
|
|
retval = -ERESTARTSYS;
|
|
goto out;
|
|
}
|
|
|
|
if (need_resched())
|
|
schedule();
|
|
}
|
|
|
|
out:
|
|
parport_release(table[minor].dev);
|
|
return retval;
|
|
}
|
|
|
|
static int
|
|
tipar_ioctl(struct inode *inode, struct file *file,
|
|
unsigned int cmd, unsigned long arg)
|
|
{
|
|
int retval = 0;
|
|
|
|
switch (cmd) {
|
|
case IOCTL_TIPAR_DELAY:
|
|
delay = (int)arg; //get_user(delay, &arg);
|
|
break;
|
|
case IOCTL_TIPAR_TIMEOUT:
|
|
if (arg != 0)
|
|
timeout = (int)arg;
|
|
else
|
|
retval = -EINVAL;
|
|
break;
|
|
default:
|
|
retval = -ENOTTY;
|
|
break;
|
|
}
|
|
|
|
return retval;
|
|
}
|
|
|
|
/* ----- kernel module registering ------------------------------------ */
|
|
|
|
static struct file_operations tipar_fops = {
|
|
.owner = THIS_MODULE,
|
|
.llseek = no_llseek,
|
|
.read = tipar_read,
|
|
.write = tipar_write,
|
|
.ioctl = tipar_ioctl,
|
|
.open = tipar_open,
|
|
.release = tipar_close,
|
|
};
|
|
|
|
/* --- initialisation code ------------------------------------- */
|
|
|
|
#ifndef MODULE
|
|
/* You must set these - there is no sane way to probe for this cable.
|
|
* You can use 'tipar=timeout,delay' to set these now. */
|
|
static int __init
|
|
tipar_setup(char *str)
|
|
{
|
|
int ints[3];
|
|
|
|
str = get_options(str, ARRAY_SIZE(ints), ints);
|
|
|
|
if (ints[0] > 0) {
|
|
if (ints[1] != 0)
|
|
timeout = ints[1];
|
|
else
|
|
printk(KERN_WARNING "tipar: bad timeout value (0), "
|
|
"using default value instead");
|
|
if (ints[0] > 1) {
|
|
delay = ints[2];
|
|
}
|
|
}
|
|
|
|
return 1;
|
|
}
|
|
#endif
|
|
|
|
/*
|
|
* Register our module into parport.
|
|
* Pass also 2 callbacks functions to parport: a pre-emptive function and an
|
|
* interrupt handler function (unused).
|
|
* Display a message such "tipar0: using parport0 (polling)".
|
|
*/
|
|
static int
|
|
tipar_register(int nr, struct parport *port)
|
|
{
|
|
int err = 0;
|
|
|
|
/* Register our module into parport */
|
|
table[nr].dev = parport_register_device(port, "tipar",
|
|
NULL, NULL, NULL, 0,
|
|
(void *) &table[nr]);
|
|
|
|
if (table[nr].dev == NULL) {
|
|
err = 1;
|
|
goto out;
|
|
}
|
|
|
|
class_device_create(tipar_class, NULL, MKDEV(TIPAR_MAJOR,
|
|
TIPAR_MINOR + nr), NULL, "par%d", nr);
|
|
/* Use devfs, tree: /dev/ticables/par/[0..2] */
|
|
err = devfs_mk_cdev(MKDEV(TIPAR_MAJOR, TIPAR_MINOR + nr),
|
|
S_IFCHR | S_IRUGO | S_IWUGO,
|
|
"ticables/par/%d", nr);
|
|
if (err)
|
|
goto out_class;
|
|
|
|
/* Display informations */
|
|
pr_info("tipar%d: using %s (%s)\n", nr, port->name, (port->irq ==
|
|
PARPORT_IRQ_NONE) ? "polling" : "interrupt-driven");
|
|
|
|
if (probe_ti_parallel(nr) != -1)
|
|
pr_info("tipar%d: link cable found\n", nr);
|
|
else
|
|
pr_info("tipar%d: link cable not found\n", nr);
|
|
|
|
err = 0;
|
|
goto out;
|
|
|
|
out_class:
|
|
class_device_destroy(tipar_class, MKDEV(TIPAR_MAJOR, TIPAR_MINOR + nr));
|
|
class_destroy(tipar_class);
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
static void
|
|
tipar_attach(struct parport *port)
|
|
{
|
|
if (tp_count == PP_NO) {
|
|
pr_info("tipar: ignoring parallel port (max. %d)\n", PP_NO);
|
|
return;
|
|
}
|
|
|
|
if (!tipar_register(tp_count, port))
|
|
tp_count++;
|
|
}
|
|
|
|
static void
|
|
tipar_detach(struct parport *port)
|
|
{
|
|
/* Nothing to do */
|
|
}
|
|
|
|
static struct parport_driver tipar_driver = {
|
|
.name = "tipar",
|
|
.attach = tipar_attach,
|
|
.detach = tipar_detach,
|
|
};
|
|
|
|
static int __init
|
|
tipar_init_module(void)
|
|
{
|
|
int err = 0;
|
|
|
|
pr_info("tipar: parallel link cable driver, version %s\n",
|
|
DRIVER_VERSION);
|
|
|
|
if (register_chrdev(TIPAR_MAJOR, "tipar", &tipar_fops)) {
|
|
printk(KERN_ERR "tipar: unable to get major %d\n", TIPAR_MAJOR);
|
|
err = -EIO;
|
|
goto out;
|
|
}
|
|
|
|
/* Use devfs with tree: /dev/ticables/par/[0..2] */
|
|
devfs_mk_dir("ticables/par");
|
|
|
|
tipar_class = class_create(THIS_MODULE, "ticables");
|
|
if (IS_ERR(tipar_class)) {
|
|
err = PTR_ERR(tipar_class);
|
|
goto out_chrdev;
|
|
}
|
|
if (parport_register_driver(&tipar_driver) || tp_count == 0) {
|
|
printk(KERN_ERR "tipar: unable to register with parport\n");
|
|
err = -EIO;
|
|
goto out_class;
|
|
}
|
|
|
|
err = 0;
|
|
goto out;
|
|
|
|
out_class:
|
|
class_destroy(tipar_class);
|
|
|
|
out_chrdev:
|
|
devfs_remove("ticables/par");
|
|
unregister_chrdev(TIPAR_MAJOR, "tipar");
|
|
out:
|
|
return err;
|
|
}
|
|
|
|
static void __exit
|
|
tipar_cleanup_module(void)
|
|
{
|
|
unsigned int i;
|
|
|
|
/* Unregistering module */
|
|
parport_unregister_driver(&tipar_driver);
|
|
|
|
unregister_chrdev(TIPAR_MAJOR, "tipar");
|
|
|
|
for (i = 0; i < PP_NO; i++) {
|
|
if (table[i].dev == NULL)
|
|
continue;
|
|
parport_unregister_device(table[i].dev);
|
|
class_device_destroy(tipar_class, MKDEV(TIPAR_MAJOR, i));
|
|
devfs_remove("ticables/par/%d", i);
|
|
}
|
|
class_destroy(tipar_class);
|
|
devfs_remove("ticables/par");
|
|
|
|
pr_info("tipar: module unloaded\n");
|
|
}
|
|
|
|
/* --------------------------------------------------------------------- */
|
|
|
|
__setup("tipar=", tipar_setup);
|
|
module_init(tipar_init_module);
|
|
module_exit(tipar_cleanup_module);
|
|
|
|
MODULE_AUTHOR(DRIVER_AUTHOR);
|
|
MODULE_DESCRIPTION(DRIVER_DESC);
|
|
MODULE_LICENSE(DRIVER_LICENSE);
|
|
|
|
module_param(timeout, int, 0);
|
|
MODULE_PARM_DESC(timeout, "Timeout (default=1.5 seconds)");
|
|
module_param(delay, int, 0);
|
|
MODULE_PARM_DESC(delay, "Inter-bit delay (default=10 microseconds)");
|