linux-sg2042/drivers/mtd/nand/cmx270_nand.c

268 lines
5.9 KiB
C

/*
* linux/drivers/mtd/nand/cmx270-nand.c
*
* Copyright (C) 2006 Compulab, Ltd.
* Mike Rapoport <mike@compulab.co.il>
*
* Derived from drivers/mtd/nand/h1910.c
* Copyright (C) 2002 Marius Gröger (mag@sysgo.de)
* Copyright (c) 2001 Thomas Gleixner (gleixner@autronix.de)
*
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Overview:
* This is a device driver for the NAND flash device found on the
* CM-X270 board.
*/
#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/arch/hardware.h>
#include <asm/arch/pxa-regs.h>
#define GPIO_NAND_CS (11)
#define GPIO_NAND_RB (89)
/* This macro needed to ensure in-order operation of GPIO and local
* bus. Without both asm command and dummy uncached read there're
* states when NAND access is broken. I've looked for such macro(s) in
* include/asm-arm but found nothing approptiate.
* dmac_clean_range is close, but is makes cache invalidation
* unnecessary here and it cannot be used in module
*/
#define DRAIN_WB() \
do { \
unsigned char dummy; \
asm volatile ("mcr p15, 0, r0, c7, c10, 4":::"r0"); \
dummy=*((unsigned char*)UNCACHED_ADDR); \
} while(0)
/* MTD structure for CM-X270 board */
static struct mtd_info *cmx270_nand_mtd;
/* remaped IO address of the device */
static void __iomem *cmx270_nand_io;
/*
* Define static partitions for flash device
*/
static struct mtd_partition partition_info[] = {
[0] = {
.name = "cmx270-0",
.offset = 0,
.size = MTDPART_SIZ_FULL
}
};
#define NUM_PARTITIONS (ARRAY_SIZE(partition_info))
const char *part_probes[] = { "cmdlinepart", NULL };
static u_char cmx270_read_byte(struct mtd_info *mtd)
{
struct nand_chip *this = mtd->priv;
return (readl(this->IO_ADDR_R) >> 16);
}
static void cmx270_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
{
int i;
struct nand_chip *this = mtd->priv;
for (i=0; i<len; i++)
writel((*buf++ << 16), this->IO_ADDR_W);
}
static void cmx270_read_buf(struct mtd_info *mtd, u_char *buf, int len)
{
int i;
struct nand_chip *this = mtd->priv;
for (i=0; i<len; i++)
*buf++ = readl(this->IO_ADDR_R) >> 16;
}
static int cmx270_verify_buf(struct mtd_info *mtd, const u_char *buf, int len)
{
int i;
struct nand_chip *this = mtd->priv;
for (i=0; i<len; i++)
if (buf[i] != (u_char)(readl(this->IO_ADDR_R) >> 16))
return -EFAULT;
return 0;
}
static inline void nand_cs_on(void)
{
GPCR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS);
}
static void nand_cs_off(void)
{
DRAIN_WB();
GPSR(GPIO_NAND_CS) = GPIO_bit(GPIO_NAND_CS);
}
/*
* hardware specific access to control-lines
*/
static void cmx270_hwcontrol(struct mtd_info *mtd, int dat,
unsigned int ctrl)
{
struct nand_chip* this = mtd->priv;
unsigned int nandaddr = (unsigned int)this->IO_ADDR_W;
DRAIN_WB();
if (ctrl & NAND_CTRL_CHANGE) {
if ( ctrl & NAND_ALE )
nandaddr |= (1 << 3);
else
nandaddr &= ~(1 << 3);
if ( ctrl & NAND_CLE )
nandaddr |= (1 << 2);
else
nandaddr &= ~(1 << 2);
if ( ctrl & NAND_NCE )
nand_cs_on();
else
nand_cs_off();
}
DRAIN_WB();
this->IO_ADDR_W = (void __iomem*)nandaddr;
if (dat != NAND_CMD_NONE)
writel((dat << 16), this->IO_ADDR_W);
DRAIN_WB();
}
/*
* read device ready pin
*/
static int cmx270_device_ready(struct mtd_info *mtd)
{
DRAIN_WB();
return (GPLR(GPIO_NAND_RB) & GPIO_bit(GPIO_NAND_RB));
}
/*
* Main initialization routine
*/
static int cmx270_init(void)
{
struct nand_chip *this;
const char *part_type;
struct mtd_partition *mtd_parts;
int mtd_parts_nb = 0;
int ret;
/* Allocate memory for MTD device structure and private data */
cmx270_nand_mtd = kzalloc(sizeof(struct mtd_info) +
sizeof(struct nand_chip),
GFP_KERNEL);
if (!cmx270_nand_mtd) {
printk("Unable to allocate CM-X270 NAND MTD device structure.\n");
return -ENOMEM;
}
cmx270_nand_io = ioremap(PXA_CS1_PHYS, 12);
if (!cmx270_nand_io) {
printk("Unable to ioremap NAND device\n");
ret = -EINVAL;
goto err1;
}
/* Get pointer to private data */
this = (struct nand_chip *)(&cmx270_nand_mtd[1]);
/* Link the private data with the MTD structure */
cmx270_nand_mtd->owner = THIS_MODULE;
cmx270_nand_mtd->priv = this;
/* insert callbacks */
this->IO_ADDR_R = cmx270_nand_io;
this->IO_ADDR_W = cmx270_nand_io;
this->cmd_ctrl = cmx270_hwcontrol;
this->dev_ready = cmx270_device_ready;
/* 15 us command delay time */
this->chip_delay = 20;
this->ecc.mode = NAND_ECC_SOFT;
/* read/write functions */
this->read_byte = cmx270_read_byte;
this->read_buf = cmx270_read_buf;
this->write_buf = cmx270_write_buf;
this->verify_buf = cmx270_verify_buf;
/* Scan to find existence of the device */
if (nand_scan (cmx270_nand_mtd, 1)) {
printk(KERN_NOTICE "No NAND device\n");
ret = -ENXIO;
goto err2;
}
#ifdef CONFIG_MTD_CMDLINE_PARTS
mtd_parts_nb = parse_mtd_partitions(cmx270_nand_mtd, part_probes,
&mtd_parts, 0);
if (mtd_parts_nb > 0)
part_type = "command line";
else
mtd_parts_nb = 0;
#endif
if (!mtd_parts_nb) {
mtd_parts = partition_info;
mtd_parts_nb = NUM_PARTITIONS;
part_type = "static";
}
/* Register the partitions */
printk(KERN_NOTICE "Using %s partition definition\n", part_type);
ret = add_mtd_partitions(cmx270_nand_mtd, mtd_parts, mtd_parts_nb);
if (ret)
goto err2;
/* Return happy */
return 0;
err2:
iounmap(cmx270_nand_io);
err1:
kfree(cmx270_nand_mtd);
return ret;
}
module_init(cmx270_init);
/*
* Clean up routine
*/
static void cmx270_cleanup(void)
{
/* Release resources, unregister device */
nand_release(cmx270_nand_mtd);
iounmap(cmx270_nand_io);
/* Free the MTD device structure */
kfree (cmx270_nand_mtd);
}
module_exit(cmx270_cleanup);
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Mike Rapoport <mike@compulab.co.il>");
MODULE_DESCRIPTION("NAND flash driver for Compulab CM-X270 Module");