365 lines
9.3 KiB
C
365 lines
9.3 KiB
C
// SPDX-License-Identifier: GPL-2.0
|
|
/*
|
|
* AD7606 SPI ADC driver
|
|
*
|
|
* Copyright 2011 Analog Devices Inc.
|
|
*/
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/spi/spi.h>
|
|
#include <linux/types.h>
|
|
#include <linux/err.h>
|
|
|
|
#include <linux/iio/iio.h>
|
|
#include "ad7606.h"
|
|
|
|
#define MAX_SPI_FREQ_HZ 23500000 /* VDRIVE above 4.75 V */
|
|
|
|
#define AD7616_CONFIGURATION_REGISTER 0x02
|
|
#define AD7616_OS_MASK GENMASK(4, 2)
|
|
#define AD7616_BURST_MODE BIT(6)
|
|
#define AD7616_SEQEN_MODE BIT(5)
|
|
#define AD7616_RANGE_CH_A_ADDR_OFF 0x04
|
|
#define AD7616_RANGE_CH_B_ADDR_OFF 0x06
|
|
/*
|
|
* Range of channels from a group are stored in 2 registers.
|
|
* 0, 1, 2, 3 in a register followed by 4, 5, 6, 7 in second register.
|
|
* For channels from second group(8-15) the order is the same, only with
|
|
* an offset of 2 for register address.
|
|
*/
|
|
#define AD7616_RANGE_CH_ADDR(ch) ((ch) >> 2)
|
|
/* The range of the channel is stored in 2 bits */
|
|
#define AD7616_RANGE_CH_MSK(ch) (0b11 << (((ch) & 0b11) * 2))
|
|
#define AD7616_RANGE_CH_MODE(ch, mode) ((mode) << ((((ch) & 0b11)) * 2))
|
|
|
|
#define AD7606_CONFIGURATION_REGISTER 0x02
|
|
#define AD7606_SINGLE_DOUT 0x00
|
|
|
|
/*
|
|
* Range for AD7606B channels are stored in registers starting with address 0x3.
|
|
* Each register stores range for 2 channels(4 bits per channel).
|
|
*/
|
|
#define AD7606_RANGE_CH_MSK(ch) (GENMASK(3, 0) << (4 * ((ch) & 0x1)))
|
|
#define AD7606_RANGE_CH_MODE(ch, mode) \
|
|
((GENMASK(3, 0) & mode) << (4 * ((ch) & 0x1)))
|
|
#define AD7606_RANGE_CH_ADDR(ch) (0x03 + ((ch) >> 1))
|
|
#define AD7606_OS_MODE 0x08
|
|
|
|
static const struct iio_chan_spec ad7616_sw_channels[] = {
|
|
IIO_CHAN_SOFT_TIMESTAMP(16),
|
|
AD7616_CHANNEL(0),
|
|
AD7616_CHANNEL(1),
|
|
AD7616_CHANNEL(2),
|
|
AD7616_CHANNEL(3),
|
|
AD7616_CHANNEL(4),
|
|
AD7616_CHANNEL(5),
|
|
AD7616_CHANNEL(6),
|
|
AD7616_CHANNEL(7),
|
|
AD7616_CHANNEL(8),
|
|
AD7616_CHANNEL(9),
|
|
AD7616_CHANNEL(10),
|
|
AD7616_CHANNEL(11),
|
|
AD7616_CHANNEL(12),
|
|
AD7616_CHANNEL(13),
|
|
AD7616_CHANNEL(14),
|
|
AD7616_CHANNEL(15),
|
|
};
|
|
|
|
static const struct iio_chan_spec ad7606b_sw_channels[] = {
|
|
IIO_CHAN_SOFT_TIMESTAMP(8),
|
|
AD7616_CHANNEL(0),
|
|
AD7616_CHANNEL(1),
|
|
AD7616_CHANNEL(2),
|
|
AD7616_CHANNEL(3),
|
|
AD7616_CHANNEL(4),
|
|
AD7616_CHANNEL(5),
|
|
AD7616_CHANNEL(6),
|
|
AD7616_CHANNEL(7),
|
|
};
|
|
|
|
static const unsigned int ad7606B_oversampling_avail[9] = {
|
|
1, 2, 4, 8, 16, 32, 64, 128, 256
|
|
};
|
|
|
|
static u16 ad7616_spi_rd_wr_cmd(int addr, char isWriteOp)
|
|
{
|
|
/*
|
|
* The address of register consist of one w/r bit
|
|
* 6 bits of address followed by one reserved bit.
|
|
*/
|
|
return ((addr & 0x7F) << 1) | ((isWriteOp & 0x1) << 7);
|
|
}
|
|
|
|
static u16 ad7606B_spi_rd_wr_cmd(int addr, char is_write_op)
|
|
{
|
|
/*
|
|
* The address of register consists of one bit which
|
|
* specifies a read command placed in bit 6, followed by
|
|
* 6 bits of address.
|
|
*/
|
|
return (addr & 0x3F) | (((~is_write_op) & 0x1) << 6);
|
|
}
|
|
|
|
static int ad7606_spi_read_block(struct device *dev,
|
|
int count, void *buf)
|
|
{
|
|
struct spi_device *spi = to_spi_device(dev);
|
|
int i, ret;
|
|
unsigned short *data = buf;
|
|
__be16 *bdata = buf;
|
|
|
|
ret = spi_read(spi, buf, count * 2);
|
|
if (ret < 0) {
|
|
dev_err(&spi->dev, "SPI read error\n");
|
|
return ret;
|
|
}
|
|
|
|
for (i = 0; i < count; i++)
|
|
data[i] = be16_to_cpu(bdata[i]);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int ad7606_spi_reg_read(struct ad7606_state *st, unsigned int addr)
|
|
{
|
|
struct spi_device *spi = to_spi_device(st->dev);
|
|
struct spi_transfer t[] = {
|
|
{
|
|
.tx_buf = &st->d16[0],
|
|
.len = 2,
|
|
.cs_change = 0,
|
|
}, {
|
|
.rx_buf = &st->d16[1],
|
|
.len = 2,
|
|
},
|
|
};
|
|
int ret;
|
|
|
|
st->d16[0] = cpu_to_be16(st->bops->rd_wr_cmd(addr, 0) << 8);
|
|
|
|
ret = spi_sync_transfer(spi, t, ARRAY_SIZE(t));
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
return be16_to_cpu(st->d16[1]);
|
|
}
|
|
|
|
static int ad7606_spi_reg_write(struct ad7606_state *st,
|
|
unsigned int addr,
|
|
unsigned int val)
|
|
{
|
|
struct spi_device *spi = to_spi_device(st->dev);
|
|
|
|
st->d16[0] = cpu_to_be16((st->bops->rd_wr_cmd(addr, 1) << 8) |
|
|
(val & 0x1FF));
|
|
|
|
return spi_write(spi, &st->d16[0], sizeof(st->d16[0]));
|
|
}
|
|
|
|
static int ad7606_spi_write_mask(struct ad7606_state *st,
|
|
unsigned int addr,
|
|
unsigned long mask,
|
|
unsigned int val)
|
|
{
|
|
int readval;
|
|
|
|
readval = st->bops->reg_read(st, addr);
|
|
if (readval < 0)
|
|
return readval;
|
|
|
|
readval &= ~mask;
|
|
readval |= val;
|
|
|
|
return st->bops->reg_write(st, addr, readval);
|
|
}
|
|
|
|
static int ad7616_write_scale_sw(struct iio_dev *indio_dev, int ch, int val)
|
|
{
|
|
struct ad7606_state *st = iio_priv(indio_dev);
|
|
unsigned int ch_addr, mode, ch_index;
|
|
|
|
|
|
/*
|
|
* Ad7616 has 16 channels divided in group A and group B.
|
|
* The range of channels from A are stored in registers with address 4
|
|
* while channels from B are stored in register with address 6.
|
|
* The last bit from channels determines if it is from group A or B
|
|
* because the order of channels in iio is 0A, 0B, 1A, 1B...
|
|
*/
|
|
ch_index = ch >> 1;
|
|
|
|
ch_addr = AD7616_RANGE_CH_ADDR(ch_index);
|
|
|
|
if ((ch & 0x1) == 0) /* channel A */
|
|
ch_addr += AD7616_RANGE_CH_A_ADDR_OFF;
|
|
else /* channel B */
|
|
ch_addr += AD7616_RANGE_CH_B_ADDR_OFF;
|
|
|
|
/* 0b01 for 2.5v, 0b10 for 5v and 0b11 for 10v */
|
|
mode = AD7616_RANGE_CH_MODE(ch_index, ((val + 1) & 0b11));
|
|
return st->bops->write_mask(st, ch_addr, AD7616_RANGE_CH_MSK(ch_index),
|
|
mode);
|
|
}
|
|
|
|
static int ad7616_write_os_sw(struct iio_dev *indio_dev, int val)
|
|
{
|
|
struct ad7606_state *st = iio_priv(indio_dev);
|
|
|
|
return st->bops->write_mask(st, AD7616_CONFIGURATION_REGISTER,
|
|
AD7616_OS_MASK, val << 2);
|
|
}
|
|
|
|
static int ad7606_write_scale_sw(struct iio_dev *indio_dev, int ch, int val)
|
|
{
|
|
struct ad7606_state *st = iio_priv(indio_dev);
|
|
|
|
return ad7606_spi_write_mask(st,
|
|
AD7606_RANGE_CH_ADDR(ch),
|
|
AD7606_RANGE_CH_MSK(ch),
|
|
AD7606_RANGE_CH_MODE(ch, val));
|
|
}
|
|
|
|
static int ad7606_write_os_sw(struct iio_dev *indio_dev, int val)
|
|
{
|
|
struct ad7606_state *st = iio_priv(indio_dev);
|
|
|
|
return ad7606_spi_reg_write(st, AD7606_OS_MODE, val);
|
|
}
|
|
|
|
static int ad7616_sw_mode_config(struct iio_dev *indio_dev)
|
|
{
|
|
struct ad7606_state *st = iio_priv(indio_dev);
|
|
|
|
/*
|
|
* Scale can be configured individually for each channel
|
|
* in software mode.
|
|
*/
|
|
indio_dev->channels = ad7616_sw_channels;
|
|
|
|
st->write_scale = ad7616_write_scale_sw;
|
|
st->write_os = &ad7616_write_os_sw;
|
|
|
|
/* Activate Burst mode and SEQEN MODE */
|
|
return st->bops->write_mask(st,
|
|
AD7616_CONFIGURATION_REGISTER,
|
|
AD7616_BURST_MODE | AD7616_SEQEN_MODE,
|
|
AD7616_BURST_MODE | AD7616_SEQEN_MODE);
|
|
}
|
|
|
|
static int ad7606B_sw_mode_config(struct iio_dev *indio_dev)
|
|
{
|
|
struct ad7606_state *st = iio_priv(indio_dev);
|
|
unsigned long os[3] = {1};
|
|
|
|
/*
|
|
* Software mode is enabled when all three oversampling
|
|
* pins are set to high. If oversampling gpios are defined
|
|
* in the device tree, then they need to be set to high,
|
|
* otherwise, they must be hardwired to VDD
|
|
*/
|
|
if (st->gpio_os) {
|
|
gpiod_set_array_value(ARRAY_SIZE(os),
|
|
st->gpio_os->desc, st->gpio_os->info, os);
|
|
}
|
|
/* OS of 128 and 256 are available only in software mode */
|
|
st->oversampling_avail = ad7606B_oversampling_avail;
|
|
st->num_os_ratios = ARRAY_SIZE(ad7606B_oversampling_avail);
|
|
|
|
st->write_scale = ad7606_write_scale_sw;
|
|
st->write_os = &ad7606_write_os_sw;
|
|
|
|
/* Configure device spi to output on a single channel */
|
|
st->bops->reg_write(st,
|
|
AD7606_CONFIGURATION_REGISTER,
|
|
AD7606_SINGLE_DOUT);
|
|
|
|
/*
|
|
* Scale can be configured individually for each channel
|
|
* in software mode.
|
|
*/
|
|
indio_dev->channels = ad7606b_sw_channels;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static const struct ad7606_bus_ops ad7606_spi_bops = {
|
|
.read_block = ad7606_spi_read_block,
|
|
};
|
|
|
|
static const struct ad7606_bus_ops ad7616_spi_bops = {
|
|
.read_block = ad7606_spi_read_block,
|
|
.reg_read = ad7606_spi_reg_read,
|
|
.reg_write = ad7606_spi_reg_write,
|
|
.write_mask = ad7606_spi_write_mask,
|
|
.rd_wr_cmd = ad7616_spi_rd_wr_cmd,
|
|
.sw_mode_config = ad7616_sw_mode_config,
|
|
};
|
|
|
|
static const struct ad7606_bus_ops ad7606B_spi_bops = {
|
|
.read_block = ad7606_spi_read_block,
|
|
.reg_read = ad7606_spi_reg_read,
|
|
.reg_write = ad7606_spi_reg_write,
|
|
.write_mask = ad7606_spi_write_mask,
|
|
.rd_wr_cmd = ad7606B_spi_rd_wr_cmd,
|
|
.sw_mode_config = ad7606B_sw_mode_config,
|
|
};
|
|
|
|
static int ad7606_spi_probe(struct spi_device *spi)
|
|
{
|
|
const struct spi_device_id *id = spi_get_device_id(spi);
|
|
const struct ad7606_bus_ops *bops;
|
|
|
|
switch (id->driver_data) {
|
|
case ID_AD7616:
|
|
bops = &ad7616_spi_bops;
|
|
break;
|
|
case ID_AD7606B:
|
|
bops = &ad7606B_spi_bops;
|
|
break;
|
|
default:
|
|
bops = &ad7606_spi_bops;
|
|
break;
|
|
}
|
|
|
|
return ad7606_probe(&spi->dev, spi->irq, NULL,
|
|
id->name, id->driver_data,
|
|
bops);
|
|
}
|
|
|
|
static const struct spi_device_id ad7606_id_table[] = {
|
|
{ "ad7605-4", ID_AD7605_4 },
|
|
{ "ad7606-4", ID_AD7606_4 },
|
|
{ "ad7606-6", ID_AD7606_6 },
|
|
{ "ad7606-8", ID_AD7606_8 },
|
|
{ "ad7606b", ID_AD7606B },
|
|
{ "ad7616", ID_AD7616 },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(spi, ad7606_id_table);
|
|
|
|
static const struct of_device_id ad7606_of_match[] = {
|
|
{ .compatible = "adi,ad7605-4" },
|
|
{ .compatible = "adi,ad7606-4" },
|
|
{ .compatible = "adi,ad7606-6" },
|
|
{ .compatible = "adi,ad7606-8" },
|
|
{ .compatible = "adi,ad7606b" },
|
|
{ .compatible = "adi,ad7616" },
|
|
{ },
|
|
};
|
|
MODULE_DEVICE_TABLE(of, ad7606_of_match);
|
|
|
|
static struct spi_driver ad7606_driver = {
|
|
.driver = {
|
|
.name = "ad7606",
|
|
.of_match_table = ad7606_of_match,
|
|
.pm = AD7606_PM_OPS,
|
|
},
|
|
.probe = ad7606_spi_probe,
|
|
.id_table = ad7606_id_table,
|
|
};
|
|
module_spi_driver(ad7606_driver);
|
|
|
|
MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
|
|
MODULE_DESCRIPTION("Analog Devices AD7606 ADC");
|
|
MODULE_LICENSE("GPL v2");
|