linux-sg2042/Documentation/driver-api/gpio
Linus Torvalds 6ba3d7066c This is the bulk of pin control changes for the v5.6 kernel cycle:
Core changes:
 
 - Dropped the chained IRQ setup callback into GPIOLIB as we
   got rid of the last users of that in this changeset.
 
 New drivers:
 
 - New driver for Ingenic X1830.
 
 - New driver for Freescale i.MX8MP.
 
 Driver enhancements:
 
 - Fix all remaining Intel drivers to pass their IRQ chips
   along with the GPIO chips.
 
 - Intel Baytrail allocates its irqchip dynamically.
 
 - Intel Lynxpoint is thoroughly rewritten and modernized.
 
 - Aspeed AST2600 pin muxing and configuration is much
   improved.
 
 - Qualcomm SC7180 functions are updated and wakeup interrupt
   map is provided.
 
 - A whole slew of Renesas SH-PFC cleanups and improvements.
 
 - Fix up the Intel DT bindings to use the generic YAML
   DT bindings schema. (A first user of this.)
 -----BEGIN PGP SIGNATURE-----
 
 iQIzBAABCAAdFiEElDRnuGcz/wPCXQWMQRCzN7AZXXMFAl4xQIkACgkQQRCzN7AZ
 XXNchQ/8C4+SAMMcDQm4sIWV1duebynrXuebISqWMhAtYDRjCsRpGCqVSt+iSWod
 z29pJ/sm0xpG1Bz0bmDZ4oFv7u7+J89a/0Kl4OqI1pbO97Uadu2qGmYxZf2tMtlH
 CwWVOUAldU9scogRD6Z+qixYdRRpKufpaVaU7ooubHocmgRtzd/VCT2MX76c3w7j
 1+yHjoAKM59jpOD/8oEucEYB+5ngyTiMXo3Nms/6ciq52GdtMLE8nK+t7dM+xNLL
 hMQP95iQ2Xb+cM/bv+vdMyKF6vRxKkkeQ/hWcivGWgdI/BSFg0vCq0mWdc8qWp8k
 VeIBaTVh5wuaAdkir9dHX/zt6TsRV8ktv88jW773/z4jHr/8PmQUyFMyEA1u1haP
 yrC/vm4eL6QWCAZeATra5+5FoH2ljzwaY2rgeU0hNixjaF/aIp3GPci7+YmKHTIr
 5zZTXKAeuC/nV7g77w4O9iwn+SHWPytWBrfNZ7unyV5fl4XHckY2vNBa/g8xkYyb
 FBk642EwHRGCULb8m40+cB7TMUzk9aluXge1detJDbqlr2i+tSOWp1c3GSavLl1L
 4qRAAS2j6de1H/EaoO7EcArVrSMdPgLdpRmwCMc2xvL0HOprl6y+5iL7x86ZtQHu
 NHvgnjtw6Z6t9n28f5ZI1iEXUA6EHOHHc/sPPUqScCj4v85B25A=
 =PnK5
 -----END PGP SIGNATURE-----

Merge tag 'pinctrl-v5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "This is the bulk of pin control changes, nothing too exciting about
  this.

  Some changes hit arch/sh and arch/arm but are well isolated and
  acknowledged by the respective arch maintainers.

  Core changes:

   - Dropped the chained IRQ setup callback into GPIOLIB as we got rid
     of the last users of that in this changeset.

  New drivers:

   - New driver for Ingenic X1830.

   - New driver for Freescale i.MX8MP.

  Driver enhancements:

   - Fix all remaining Intel drivers to pass their IRQ chips along with
     the GPIO chips.

   - Intel Baytrail allocates its irqchip dynamically.

   - Intel Lynxpoint is thoroughly rewritten and modernized.

   - Aspeed AST2600 pin muxing and configuration is much improved.

   - Qualcomm SC7180 functions are updated and wakeup interrupt map is
     provided.

   - A whole slew of Renesas SH-PFC cleanups and improvements.

   - Fix up the Intel DT bindings to use the generic YAML DT bindings
     schema (a first user of this)"

* tag 'pinctrl-v5.6-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (99 commits)
  pinctrl: madera: Remove extra blank line
  pinctrl: qcom: Don't lock around irq_set_irq_wake()
  pinctrl: mvebu: armada-37xx: use use platform api
  gpio: Drop the chained IRQ handler assign function
  pinctrl: freescale: Add i.MX8MP pinctrl driver support
  dt-bindings: imx: Add pinctrl binding doc for i.MX8MP
  pinctrl: tigerlake: Tiger Lake uses _HID enumeration
  pinctrl: sunrisepoint: Add Coffee Lake-S ACPI ID
  pinctrl: iproc: Use platform_get_irq_optional() to avoid error message
  pinctrl: dt-bindings: Fix some errors in the lgm and pinmux schema
  pinctrl: intel: Pass irqchip when adding gpiochip
  pinctrl: intel: Add GPIO <-> pin mapping ranges via callback
  pinctrl: baytrail: Replace WARN with dev_info_once when setting direct-irq pin to output
  pinctrl: baytrail: Do not clear IRQ flags on direct-irq enabled pins
  pinctrl: sunrisepoint: Add missing Interrupt Status register offset
  pinctrl: sh-pfc: Split R-Car H3 support in two independent drivers
  pinctrl: artpec6: fix __iomem on reg in set
  pinctrl: ingenic: Use devm_platform_ioremap_resource()
  pinctrl: ingenic: Factorize irq_set_type function
  pinctrl: ingenic: Remove duplicated ingenic_chip_info structures
  ...
2020-01-29 09:51:36 -08:00
..
board.rst docs: fix broken documentation links 2019-06-08 13:42:13 -06:00
bt8xxgpio.rst docs: driver-api: bt8xxgpio: Revive dead link 2019-10-09 11:13:36 +02:00
consumer.rst It's been a relatively busy cycle for docs: 2019-07-09 12:34:26 -07:00
driver.rst gpio: Drop the chained IRQ handler assign function 2020-01-23 15:54:32 +01:00
drivers-on-gpio.rst gpio: Add use guidance documentation 2020-01-15 11:11:43 +01:00
index.rst gpio: Add use guidance documentation 2020-01-15 11:11:43 +01:00
intro.rst Documentation: gpio: Move introduction to driver-api 2018-03-23 04:20:30 +01:00
legacy.rst Documentation: gpio: legacy: Don't use POLLERR for poll(2) 2019-02-20 10:53:52 +01:00
using-gpio.rst gpio: Add use guidance documentation 2020-01-15 11:11:43 +01:00