1599 lines
40 KiB
C
1599 lines
40 KiB
C
/*
|
||
* OMAP2 McSPI controller driver
|
||
*
|
||
* Copyright (C) 2005, 2006 Nokia Corporation
|
||
* Author: Samuel Ortiz <samuel.ortiz@nokia.com> and
|
||
* Juha Yrj<72>l<EFBFBD> <juha.yrjola@nokia.com>
|
||
*
|
||
* This program is free software; you can redistribute it and/or modify
|
||
* it under the terms of the GNU General Public License as published by
|
||
* the Free Software Foundation; either version 2 of the License, or
|
||
* (at your option) any later version.
|
||
*
|
||
* This program is distributed in the hope that it will be useful,
|
||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
* GNU General Public License for more details.
|
||
*/
|
||
|
||
#include <linux/kernel.h>
|
||
#include <linux/interrupt.h>
|
||
#include <linux/module.h>
|
||
#include <linux/device.h>
|
||
#include <linux/delay.h>
|
||
#include <linux/dma-mapping.h>
|
||
#include <linux/dmaengine.h>
|
||
#include <linux/pinctrl/consumer.h>
|
||
#include <linux/platform_device.h>
|
||
#include <linux/err.h>
|
||
#include <linux/clk.h>
|
||
#include <linux/io.h>
|
||
#include <linux/slab.h>
|
||
#include <linux/pm_runtime.h>
|
||
#include <linux/of.h>
|
||
#include <linux/of_device.h>
|
||
#include <linux/gcd.h>
|
||
#include <linux/iopoll.h>
|
||
|
||
#include <linux/spi/spi.h>
|
||
#include <linux/gpio.h>
|
||
|
||
#include <linux/platform_data/spi-omap2-mcspi.h>
|
||
|
||
#define OMAP2_MCSPI_MAX_FREQ 48000000
|
||
#define OMAP2_MCSPI_MAX_DIVIDER 4096
|
||
#define OMAP2_MCSPI_MAX_FIFODEPTH 64
|
||
#define OMAP2_MCSPI_MAX_FIFOWCNT 0xFFFF
|
||
#define SPI_AUTOSUSPEND_TIMEOUT 2000
|
||
|
||
#define OMAP2_MCSPI_REVISION 0x00
|
||
#define OMAP2_MCSPI_SYSSTATUS 0x14
|
||
#define OMAP2_MCSPI_IRQSTATUS 0x18
|
||
#define OMAP2_MCSPI_IRQENABLE 0x1c
|
||
#define OMAP2_MCSPI_WAKEUPENABLE 0x20
|
||
#define OMAP2_MCSPI_SYST 0x24
|
||
#define OMAP2_MCSPI_MODULCTRL 0x28
|
||
#define OMAP2_MCSPI_XFERLEVEL 0x7c
|
||
|
||
/* per-channel banks, 0x14 bytes each, first is: */
|
||
#define OMAP2_MCSPI_CHCONF0 0x2c
|
||
#define OMAP2_MCSPI_CHSTAT0 0x30
|
||
#define OMAP2_MCSPI_CHCTRL0 0x34
|
||
#define OMAP2_MCSPI_TX0 0x38
|
||
#define OMAP2_MCSPI_RX0 0x3c
|
||
|
||
/* per-register bitmasks: */
|
||
#define OMAP2_MCSPI_IRQSTATUS_EOW BIT(17)
|
||
|
||
#define OMAP2_MCSPI_MODULCTRL_SINGLE BIT(0)
|
||
#define OMAP2_MCSPI_MODULCTRL_MS BIT(2)
|
||
#define OMAP2_MCSPI_MODULCTRL_STEST BIT(3)
|
||
|
||
#define OMAP2_MCSPI_CHCONF_PHA BIT(0)
|
||
#define OMAP2_MCSPI_CHCONF_POL BIT(1)
|
||
#define OMAP2_MCSPI_CHCONF_CLKD_MASK (0x0f << 2)
|
||
#define OMAP2_MCSPI_CHCONF_EPOL BIT(6)
|
||
#define OMAP2_MCSPI_CHCONF_WL_MASK (0x1f << 7)
|
||
#define OMAP2_MCSPI_CHCONF_TRM_RX_ONLY BIT(12)
|
||
#define OMAP2_MCSPI_CHCONF_TRM_TX_ONLY BIT(13)
|
||
#define OMAP2_MCSPI_CHCONF_TRM_MASK (0x03 << 12)
|
||
#define OMAP2_MCSPI_CHCONF_DMAW BIT(14)
|
||
#define OMAP2_MCSPI_CHCONF_DMAR BIT(15)
|
||
#define OMAP2_MCSPI_CHCONF_DPE0 BIT(16)
|
||
#define OMAP2_MCSPI_CHCONF_DPE1 BIT(17)
|
||
#define OMAP2_MCSPI_CHCONF_IS BIT(18)
|
||
#define OMAP2_MCSPI_CHCONF_TURBO BIT(19)
|
||
#define OMAP2_MCSPI_CHCONF_FORCE BIT(20)
|
||
#define OMAP2_MCSPI_CHCONF_FFET BIT(27)
|
||
#define OMAP2_MCSPI_CHCONF_FFER BIT(28)
|
||
#define OMAP2_MCSPI_CHCONF_CLKG BIT(29)
|
||
|
||
#define OMAP2_MCSPI_CHSTAT_RXS BIT(0)
|
||
#define OMAP2_MCSPI_CHSTAT_TXS BIT(1)
|
||
#define OMAP2_MCSPI_CHSTAT_EOT BIT(2)
|
||
#define OMAP2_MCSPI_CHSTAT_TXFFE BIT(3)
|
||
|
||
#define OMAP2_MCSPI_CHCTRL_EN BIT(0)
|
||
#define OMAP2_MCSPI_CHCTRL_EXTCLK_MASK (0xff << 8)
|
||
|
||
#define OMAP2_MCSPI_WAKEUPENABLE_WKEN BIT(0)
|
||
|
||
/* We have 2 DMA channels per CS, one for RX and one for TX */
|
||
struct omap2_mcspi_dma {
|
||
struct dma_chan *dma_tx;
|
||
struct dma_chan *dma_rx;
|
||
|
||
struct completion dma_tx_completion;
|
||
struct completion dma_rx_completion;
|
||
|
||
char dma_rx_ch_name[14];
|
||
char dma_tx_ch_name[14];
|
||
};
|
||
|
||
/* use PIO for small transfers, avoiding DMA setup/teardown overhead and
|
||
* cache operations; better heuristics consider wordsize and bitrate.
|
||
*/
|
||
#define DMA_MIN_BYTES 160
|
||
|
||
|
||
/*
|
||
* Used for context save and restore, structure members to be updated whenever
|
||
* corresponding registers are modified.
|
||
*/
|
||
struct omap2_mcspi_regs {
|
||
u32 modulctrl;
|
||
u32 wakeupenable;
|
||
struct list_head cs;
|
||
};
|
||
|
||
struct omap2_mcspi {
|
||
struct completion txdone;
|
||
struct spi_master *master;
|
||
/* Virtual base address of the controller */
|
||
void __iomem *base;
|
||
unsigned long phys;
|
||
/* SPI1 has 4 channels, while SPI2 has 2 */
|
||
struct omap2_mcspi_dma *dma_channels;
|
||
struct device *dev;
|
||
struct omap2_mcspi_regs ctx;
|
||
int fifo_depth;
|
||
bool slave_aborted;
|
||
unsigned int pin_dir:1;
|
||
};
|
||
|
||
struct omap2_mcspi_cs {
|
||
void __iomem *base;
|
||
unsigned long phys;
|
||
int word_len;
|
||
u16 mode;
|
||
struct list_head node;
|
||
/* Context save and restore shadow register */
|
||
u32 chconf0, chctrl0;
|
||
};
|
||
|
||
static inline void mcspi_write_reg(struct spi_master *master,
|
||
int idx, u32 val)
|
||
{
|
||
struct omap2_mcspi *mcspi = spi_master_get_devdata(master);
|
||
|
||
writel_relaxed(val, mcspi->base + idx);
|
||
}
|
||
|
||
static inline u32 mcspi_read_reg(struct spi_master *master, int idx)
|
||
{
|
||
struct omap2_mcspi *mcspi = spi_master_get_devdata(master);
|
||
|
||
return readl_relaxed(mcspi->base + idx);
|
||
}
|
||
|
||
static inline void mcspi_write_cs_reg(const struct spi_device *spi,
|
||
int idx, u32 val)
|
||
{
|
||
struct omap2_mcspi_cs *cs = spi->controller_state;
|
||
|
||
writel_relaxed(val, cs->base + idx);
|
||
}
|
||
|
||
static inline u32 mcspi_read_cs_reg(const struct spi_device *spi, int idx)
|
||
{
|
||
struct omap2_mcspi_cs *cs = spi->controller_state;
|
||
|
||
return readl_relaxed(cs->base + idx);
|
||
}
|
||
|
||
static inline u32 mcspi_cached_chconf0(const struct spi_device *spi)
|
||
{
|
||
struct omap2_mcspi_cs *cs = spi->controller_state;
|
||
|
||
return cs->chconf0;
|
||
}
|
||
|
||
static inline void mcspi_write_chconf0(const struct spi_device *spi, u32 val)
|
||
{
|
||
struct omap2_mcspi_cs *cs = spi->controller_state;
|
||
|
||
cs->chconf0 = val;
|
||
mcspi_write_cs_reg(spi, OMAP2_MCSPI_CHCONF0, val);
|
||
mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHCONF0);
|
||
}
|
||
|
||
static inline int mcspi_bytes_per_word(int word_len)
|
||
{
|
||
if (word_len <= 8)
|
||
return 1;
|
||
else if (word_len <= 16)
|
||
return 2;
|
||
else /* word_len <= 32 */
|
||
return 4;
|
||
}
|
||
|
||
static void omap2_mcspi_set_dma_req(const struct spi_device *spi,
|
||
int is_read, int enable)
|
||
{
|
||
u32 l, rw;
|
||
|
||
l = mcspi_cached_chconf0(spi);
|
||
|
||
if (is_read) /* 1 is read, 0 write */
|
||
rw = OMAP2_MCSPI_CHCONF_DMAR;
|
||
else
|
||
rw = OMAP2_MCSPI_CHCONF_DMAW;
|
||
|
||
if (enable)
|
||
l |= rw;
|
||
else
|
||
l &= ~rw;
|
||
|
||
mcspi_write_chconf0(spi, l);
|
||
}
|
||
|
||
static void omap2_mcspi_set_enable(const struct spi_device *spi, int enable)
|
||
{
|
||
struct omap2_mcspi_cs *cs = spi->controller_state;
|
||
u32 l;
|
||
|
||
l = cs->chctrl0;
|
||
if (enable)
|
||
l |= OMAP2_MCSPI_CHCTRL_EN;
|
||
else
|
||
l &= ~OMAP2_MCSPI_CHCTRL_EN;
|
||
cs->chctrl0 = l;
|
||
mcspi_write_cs_reg(spi, OMAP2_MCSPI_CHCTRL0, cs->chctrl0);
|
||
/* Flash post-writes */
|
||
mcspi_read_cs_reg(spi, OMAP2_MCSPI_CHCTRL0);
|
||
}
|
||
|
||
static void omap2_mcspi_set_cs(struct spi_device *spi, bool enable)
|
||
{
|
||
struct omap2_mcspi *mcspi = spi_master_get_devdata(spi->master);
|
||
u32 l;
|
||
|
||
/* The controller handles the inverted chip selects
|
||
* using the OMAP2_MCSPI_CHCONF_EPOL bit so revert
|
||
* the inversion from the core spi_set_cs function.
|
||
*/
|
||
if (spi->mode & SPI_CS_HIGH)
|
||
enable = !enable;
|
||
|
||
if (spi->controller_state) {
|
||
int err = pm_runtime_get_sync(mcspi->dev);
|
||
if (err < 0) {
|
||
pm_runtime_put_noidle(mcspi->dev);
|
||
dev_err(mcspi->dev, "failed to get sync: %d\n", err);
|
||
return;
|
||
}
|
||
|
||
l = mcspi_cached_chconf0(spi);
|
||
|
||
if (enable)
|
||
l &= ~OMAP2_MCSPI_CHCONF_FORCE;
|
||
else
|
||
l |= OMAP2_MCSPI_CHCONF_FORCE;
|
||
|
||
mcspi_write_chconf0(spi, l);
|
||
|
||
pm_runtime_mark_last_busy(mcspi->dev);
|
||
pm_runtime_put_autosuspend(mcspi->dev);
|
||
}
|
||
}
|
||
|
||
static void omap2_mcspi_set_mode(struct spi_master *master)
|
||
{
|
||
struct omap2_mcspi *mcspi = spi_master_get_devdata(master);
|
||
struct omap2_mcspi_regs *ctx = &mcspi->ctx;
|
||
u32 l;
|
||
|
||
/*
|
||
* Choose master or slave mode
|
||
*/
|
||
l = mcspi_read_reg(master, OMAP2_MCSPI_MODULCTRL);
|
||
l &= ~(OMAP2_MCSPI_MODULCTRL_STEST);
|
||
if (spi_controller_is_slave(master)) {
|
||
l |= (OMAP2_MCSPI_MODULCTRL_MS);
|
||
} else {
|
||
l &= ~(OMAP2_MCSPI_MODULCTRL_MS);
|
||
l |= OMAP2_MCSPI_MODULCTRL_SINGLE;
|
||
}
|
||
mcspi_write_reg(master, OMAP2_MCSPI_MODULCTRL, l);
|
||
|
||
ctx->modulctrl = l;
|
||
}
|
||
|
||
static void omap2_mcspi_set_fifo(const struct spi_device *spi,
|
||
struct spi_transfer *t, int enable)
|
||
{
|
||
struct spi_master *master = spi->master;
|
||
struct omap2_mcspi_cs *cs = spi->controller_state;
|
||
struct omap2_mcspi *mcspi;
|
||
unsigned int wcnt;
|
||
int max_fifo_depth, bytes_per_word;
|
||
u32 chconf, xferlevel;
|
||
|
||
mcspi = spi_master_get_devdata(master);
|
||
|
||
chconf = mcspi_cached_chconf0(spi);
|
||
if (enable) {
|
||
bytes_per_word = mcspi_bytes_per_word(cs->word_len);
|
||
if (t->len % bytes_per_word != 0)
|
||
goto disable_fifo;
|
||
|
||
if (t->rx_buf != NULL && t->tx_buf != NULL)
|
||
max_fifo_depth = OMAP2_MCSPI_MAX_FIFODEPTH / 2;
|
||
else
|
||
max_fifo_depth = OMAP2_MCSPI_MAX_FIFODEPTH;
|
||
|
||
wcnt = t->len / bytes_per_word;
|
||
if (wcnt > OMAP2_MCSPI_MAX_FIFOWCNT)
|
||
goto disable_fifo;
|
||
|
||
xferlevel = wcnt << 16;
|
||
if (t->rx_buf != NULL) {
|
||
chconf |= OMAP2_MCSPI_CHCONF_FFER;
|
||
xferlevel |= (bytes_per_word - 1) << 8;
|
||
}
|
||
|
||
if (t->tx_buf != NULL) {
|
||
chconf |= OMAP2_MCSPI_CHCONF_FFET;
|
||
xferlevel |= bytes_per_word - 1;
|
||
}
|
||
|
||
mcspi_write_reg(master, OMAP2_MCSPI_XFERLEVEL, xferlevel);
|
||
mcspi_write_chconf0(spi, chconf);
|
||
mcspi->fifo_depth = max_fifo_depth;
|
||
|
||
return;
|
||
}
|
||
|
||
disable_fifo:
|
||
if (t->rx_buf != NULL)
|
||
chconf &= ~OMAP2_MCSPI_CHCONF_FFER;
|
||
|
||
if (t->tx_buf != NULL)
|
||
chconf &= ~OMAP2_MCSPI_CHCONF_FFET;
|
||
|
||
mcspi_write_chconf0(spi, chconf);
|
||
mcspi->fifo_depth = 0;
|
||
}
|
||
|
||
static int mcspi_wait_for_reg_bit(void __iomem *reg, unsigned long bit)
|
||
{
|
||
u32 val;
|
||
|
||
return readl_poll_timeout(reg, val, val & bit, 1, MSEC_PER_SEC);
|
||
}
|
||
|
||
static int mcspi_wait_for_completion(struct omap2_mcspi *mcspi,
|
||
struct completion *x)
|
||
{
|
||
if (spi_controller_is_slave(mcspi->master)) {
|
||
if (wait_for_completion_interruptible(x) ||
|
||
mcspi->slave_aborted)
|
||
return -EINTR;
|
||
} else {
|
||
wait_for_completion(x);
|
||
}
|
||
|
||
return 0;
|
||
}
|
||
|
||
static void omap2_mcspi_rx_callback(void *data)
|
||
{
|
||
struct spi_device *spi = data;
|
||
struct omap2_mcspi *mcspi = spi_master_get_devdata(spi->master);
|
||
struct omap2_mcspi_dma *mcspi_dma = &mcspi->dma_channels[spi->chip_select];
|
||
|
||
/* We must disable the DMA RX request */
|
||
omap2_mcspi_set_dma_req(spi, 1, 0);
|
||
|
||
complete(&mcspi_dma->dma_rx_completion);
|
||
}
|
||
|
||
static void omap2_mcspi_tx_callback(void *data)
|
||
{
|
||
struct spi_device *spi = data;
|
||
struct omap2_mcspi *mcspi = spi_master_get_devdata(spi->master);
|
||
struct omap2_mcspi_dma *mcspi_dma = &mcspi->dma_channels[spi->chip_select];
|
||
|
||
/* We must disable the DMA TX request */
|
||
omap2_mcspi_set_dma_req(spi, 0, 0);
|
||
|
||
complete(&mcspi_dma->dma_tx_completion);
|
||
}
|
||
|
||
static void omap2_mcspi_tx_dma(struct spi_device *spi,
|
||
struct spi_transfer *xfer,
|
||
struct dma_slave_config cfg)
|
||
{
|
||
struct omap2_mcspi *mcspi;
|
||
struct omap2_mcspi_dma *mcspi_dma;
|
||
|
||
mcspi = spi_master_get_devdata(spi->master);
|
||
mcspi_dma = &mcspi->dma_channels[spi->chip_select];
|
||
|
||
if (mcspi_dma->dma_tx) {
|
||
struct dma_async_tx_descriptor *tx;
|
||
|
||
dmaengine_slave_config(mcspi_dma->dma_tx, &cfg);
|
||
|
||
tx = dmaengine_prep_slave_sg(mcspi_dma->dma_tx, xfer->tx_sg.sgl,
|
||
xfer->tx_sg.nents,
|
||
DMA_MEM_TO_DEV,
|
||
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
|
||
if (tx) {
|
||
tx->callback = omap2_mcspi_tx_callback;
|
||
tx->callback_param = spi;
|
||
dmaengine_submit(tx);
|
||
} else {
|
||
/* FIXME: fall back to PIO? */
|
||
}
|
||
}
|
||
dma_async_issue_pending(mcspi_dma->dma_tx);
|
||
omap2_mcspi_set_dma_req(spi, 0, 1);
|
||
|
||
}
|
||
|
||
static unsigned
|
||
omap2_mcspi_rx_dma(struct spi_device *spi, struct spi_transfer *xfer,
|
||
struct dma_slave_config cfg,
|
||
unsigned es)
|
||
{
|
||
struct omap2_mcspi *mcspi;
|
||
struct omap2_mcspi_dma *mcspi_dma;
|
||
unsigned int count, transfer_reduction = 0;
|
||
struct scatterlist *sg_out[2];
|
||
int nb_sizes = 0, out_mapped_nents[2], ret, x;
|
||
size_t sizes[2];
|
||
u32 l;
|
||
int elements = 0;
|
||
int word_len, element_count;
|
||
struct omap2_mcspi_cs *cs = spi->controller_state;
|
||
void __iomem *chstat_reg = cs->base + OMAP2_MCSPI_CHSTAT0;
|
||
|
||
mcspi = spi_master_get_devdata(spi->master);
|
||
mcspi_dma = &mcspi->dma_channels[spi->chip_select];
|
||
count = xfer->len;
|
||
|
||
/*
|
||
* In the "End-of-Transfer Procedure" section for DMA RX in OMAP35x TRM
|
||
* it mentions reducing DMA transfer length by one element in master
|
||
* normal mode.
|
||
*/
|
||
if (mcspi->fifo_depth == 0)
|
||
transfer_reduction = es;
|
||
|
||
word_len = cs->word_len;
|
||
l = mcspi_cached_chconf0(spi);
|
||
|
||
if (word_len <= 8)
|
||
element_count = count;
|
||
else if (word_len <= 16)
|
||
element_count = count >> 1;
|
||
else /* word_len <= 32 */
|
||
element_count = count >> 2;
|
||
|
||
if (mcspi_dma->dma_rx) {
|
||
struct dma_async_tx_descriptor *tx;
|
||
|
||
dmaengine_slave_config(mcspi_dma->dma_rx, &cfg);
|
||
|
||
/*
|
||
* Reduce DMA transfer length by one more if McSPI is
|
||
* configured in turbo mode.
|
||
*/
|
||
if ((l & OMAP2_MCSPI_CHCONF_TURBO) && mcspi->fifo_depth == 0)
|
||
transfer_reduction += es;
|
||
|
||
if (transfer_reduction) {
|
||
/* Split sgl into two. The second sgl won't be used. */
|
||
sizes[0] = count - transfer_reduction;
|
||
sizes[1] = transfer_reduction;
|
||
nb_sizes = 2;
|
||
} else {
|
||
/*
|
||
* Don't bother splitting the sgl. This essentially
|
||
* clones the original sgl.
|
||
*/
|
||
sizes[0] = count;
|
||
nb_sizes = 1;
|
||
}
|
||
|
||
ret = sg_split(xfer->rx_sg.sgl, xfer->rx_sg.nents,
|
||
0, nb_sizes,
|
||
sizes,
|
||
sg_out, out_mapped_nents,
|
||
GFP_KERNEL);
|
||
|
||
if (ret < 0) {
|
||
dev_err(&spi->dev, "sg_split failed\n");
|
||
return 0;
|
||
}
|
||
|
||
tx = dmaengine_prep_slave_sg(mcspi_dma->dma_rx,
|
||
sg_out[0],
|
||
out_mapped_nents[0],
|
||
DMA_DEV_TO_MEM,
|
||
DMA_PREP_INTERRUPT | DMA_CTRL_ACK);
|
||
if (tx) {
|
||
tx->callback = omap2_mcspi_rx_callback;
|
||
tx->callback_param = spi;
|
||
dmaengine_submit(tx);
|
||
} else {
|
||
/* FIXME: fall back to PIO? */
|
||
}
|
||
}
|
||
|
||
dma_async_issue_pending(mcspi_dma->dma_rx);
|
||
omap2_mcspi_set_dma_req(spi, 1, 1);
|
||
|
||
ret = mcspi_wait_for_completion(mcspi, &mcspi_dma->dma_rx_completion);
|
||
if (ret || mcspi->slave_aborted) {
|
||
dmaengine_terminate_sync(mcspi_dma->dma_rx);
|
||
omap2_mcspi_set_dma_req(spi, 1, 0);
|
||
return 0;
|
||
}
|
||
|
||
for (x = 0; x < nb_sizes; x++)
|
||
kfree(sg_out[x]);
|
||
|
||
if (mcspi->fifo_depth > 0)
|
||
return count;
|
||
|
||
/*
|
||
* Due to the DMA transfer length reduction the missing bytes must
|
||
* be read manually to receive all of the expected data.
|
||
*/
|
||
omap2_mcspi_set_enable(spi, 0);
|
||
|
||
elements = element_count - 1;
|
||
|
||
if (l & OMAP2_MCSPI_CHCONF_TURBO) {
|
||
elements--;
|
||
|
||
if (!mcspi_wait_for_reg_bit(chstat_reg,
|
||
OMAP2_MCSPI_CHSTAT_RXS)) {
|
||
u32 w;
|
||
|
||
w = mcspi_read_cs_reg(spi, OMAP2_MCSPI_RX0);
|
||
if (word_len <= 8)
|
||
((u8 *)xfer->rx_buf)[elements++] = w;
|
||
else if (word_len <= 16)
|
||
((u16 *)xfer->rx_buf)[elements++] = w;
|
||
else /* word_len <= 32 */
|
||
((u32 *)xfer->rx_buf)[elements++] = w;
|
||
} else {
|
||
int bytes_per_word = mcspi_bytes_per_word(word_len);
|
||
dev_err(&spi->dev, "DMA RX penultimate word empty\n");
|
||
count -= (bytes_per_word << 1);
|
||
omap2_mcspi_set_enable(spi, 1);
|
||
return count;
|
||
}
|
||
}
|
||
if (!mcspi_wait_for_reg_bit(chstat_reg, OMAP2_MCSPI_CHSTAT_RXS)) {
|
||
u32 w;
|
||
|
||
w = mcspi_read_cs_reg(spi, OMAP2_MCSPI_RX0);
|
||
if (word_len <= 8)
|
||
((u8 *)xfer->rx_buf)[elements] = w;
|
||
else if (word_len <= 16)
|
||
((u16 *)xfer->rx_buf)[elements] = w;
|
||
else /* word_len <= 32 */
|
||
((u32 *)xfer->rx_buf)[elements] = w;
|
||
} else {
|
||
dev_err(&spi->dev, "DMA RX last word empty\n");
|
||
count -= mcspi_bytes_per_word(word_len);
|
||
}
|
||
omap2_mcspi_set_enable(spi, 1);
|
||
return count;
|
||
}
|
||
|
||
static unsigned
|
||
omap2_mcspi_txrx_dma(struct spi_device *spi, struct spi_transfer *xfer)
|
||
{
|
||
struct omap2_mcspi *mcspi;
|
||
struct omap2_mcspi_cs *cs = spi->controller_state;
|
||
struct omap2_mcspi_dma *mcspi_dma;
|
||
unsigned int count;
|
||
u8 *rx;
|
||
const u8 *tx;
|
||
struct dma_slave_config cfg;
|
||
enum dma_slave_buswidth width;
|
||
unsigned es;
|
||
void __iomem *chstat_reg;
|
||
void __iomem *irqstat_reg;
|
||
int wait_res;
|
||
|
||
mcspi = spi_master_get_devdata(spi->master);
|
||
mcspi_dma = &mcspi->dma_channels[spi->chip_select];
|
||
|
||
if (cs->word_len <= 8) {
|
||
width = DMA_SLAVE_BUSWIDTH_1_BYTE;
|
||
es = 1;
|
||
} else if (cs->word_len <= 16) {
|
||
width = DMA_SLAVE_BUSWIDTH_2_BYTES;
|
||
es = 2;
|
||
} else {
|
||
width = DMA_SLAVE_BUSWIDTH_4_BYTES;
|
||
es = 4;
|
||
}
|
||
|
||
count = xfer->len;
|
||
|
||
memset(&cfg, 0, sizeof(cfg));
|
||
cfg.src_addr = cs->phys + OMAP2_MCSPI_RX0;
|
||
cfg.dst_addr = cs->phys + OMAP2_MCSPI_TX0;
|
||
cfg.src_addr_width = width;
|
||
cfg.dst_addr_width = width;
|
||
cfg.src_maxburst = es;
|
||
cfg.dst_maxburst = es;
|
||
|
||
rx = xfer->rx_buf;
|
||
tx = xfer->tx_buf;
|
||
|
||
mcspi->slave_aborted = false;
|
||
reinit_completion(&mcspi_dma->dma_tx_completion);
|
||
reinit_completion(&mcspi_dma->dma_rx_completion);
|
||
reinit_completion(&mcspi->txdone);
|
||
if (tx) {
|
||
/* Enable EOW IRQ to know end of tx in slave mode */
|
||
if (spi_controller_is_slave(spi->master))
|
||
mcspi_write_reg(spi->master,
|
||
OMAP2_MCSPI_IRQENABLE,
|
||
OMAP2_MCSPI_IRQSTATUS_EOW);
|
||
omap2_mcspi_tx_dma(spi, xfer, cfg);
|
||
}
|
||
|
||
if (rx != NULL)
|
||
count = omap2_mcspi_rx_dma(spi, xfer, cfg, es);
|
||
|
||
if (tx != NULL) {
|
||
int ret;
|
||
|
||
ret = mcspi_wait_for_completion(mcspi, &mcspi_dma->dma_tx_completion);
|
||
if (ret || mcspi->slave_aborted) {
|
||
dmaengine_terminate_sync(mcspi_dma->dma_tx);
|
||
omap2_mcspi_set_dma_req(spi, 0, 0);
|
||
return 0;
|
||
}
|
||
|
||
if (spi_controller_is_slave(mcspi->master)) {
|
||
ret = mcspi_wait_for_completion(mcspi, &mcspi->txdone);
|
||
if (ret || mcspi->slave_aborted)
|
||
return 0;
|
||
}
|
||
|
||
if (mcspi->fifo_depth > 0) {
|
||
irqstat_reg = mcspi->base + OMAP2_MCSPI_IRQSTATUS;
|
||
|
||
if (mcspi_wait_for_reg_bit(irqstat_reg,
|
||
OMAP2_MCSPI_IRQSTATUS_EOW) < 0)
|
||
dev_err(&spi->dev, "EOW timed out\n");
|
||
|
||
mcspi_write_reg(mcspi->master, OMAP2_MCSPI_IRQSTATUS,
|
||
OMAP2_MCSPI_IRQSTATUS_EOW);
|
||
}
|
||
|
||
/* for TX_ONLY mode, be sure all words have shifted out */
|
||
if (rx == NULL) {
|
||
chstat_reg = cs->base + OMAP2_MCSPI_CHSTAT0;
|
||
if (mcspi->fifo_depth > 0) {
|
||
wait_res = mcspi_wait_for_reg_bit(chstat_reg,
|
||
OMAP2_MCSPI_CHSTAT_TXFFE);
|
||
if (wait_res < 0)
|
||
dev_err(&spi->dev, "TXFFE timed out\n");
|
||
} else {
|
||
wait_res = mcspi_wait_for_reg_bit(chstat_reg,
|
||
OMAP2_MCSPI_CHSTAT_TXS);
|
||
if (wait_res < 0)
|
||
dev_err(&spi->dev, "TXS timed out\n");
|
||
}
|
||
if (wait_res >= 0 &&
|
||
(mcspi_wait_for_reg_bit(chstat_reg,
|
||
OMAP2_MCSPI_CHSTAT_EOT) < 0))
|
||
dev_err(&spi->dev, "EOT timed out\n");
|
||
}
|
||
}
|
||
return count;
|
||
}
|
||
|
||
static unsigned
|
||
omap2_mcspi_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer)
|
||
{
|
||
struct omap2_mcspi_cs *cs = spi->controller_state;
|
||
unsigned int count, c;
|
||
u32 l;
|
||
void __iomem *base = cs->base;
|
||
void __iomem *tx_reg;
|
||
void __iomem *rx_reg;
|
||
void __iomem *chstat_reg;
|
||
int word_len;
|
||
|
||
count = xfer->len;
|
||
c = count;
|
||
word_len = cs->word_len;
|
||
|
||
l = mcspi_cached_chconf0(spi);
|
||
|
||
/* We store the pre-calculated register addresses on stack to speed
|
||
* up the transfer loop. */
|
||
tx_reg = base + OMAP2_MCSPI_TX0;
|
||
rx_reg = base + OMAP2_MCSPI_RX0;
|
||
chstat_reg = base + OMAP2_MCSPI_CHSTAT0;
|
||
|
||
if (c < (word_len>>3))
|
||
return 0;
|
||
|
||
if (word_len <= 8) {
|
||
u8 *rx;
|
||
const u8 *tx;
|
||
|
||
rx = xfer->rx_buf;
|
||
tx = xfer->tx_buf;
|
||
|
||
do {
|
||
c -= 1;
|
||
if (tx != NULL) {
|
||
if (mcspi_wait_for_reg_bit(chstat_reg,
|
||
OMAP2_MCSPI_CHSTAT_TXS) < 0) {
|
||
dev_err(&spi->dev, "TXS timed out\n");
|
||
goto out;
|
||
}
|
||
dev_vdbg(&spi->dev, "write-%d %02x\n",
|
||
word_len, *tx);
|
||
writel_relaxed(*tx++, tx_reg);
|
||
}
|
||
if (rx != NULL) {
|
||
if (mcspi_wait_for_reg_bit(chstat_reg,
|
||
OMAP2_MCSPI_CHSTAT_RXS) < 0) {
|
||
dev_err(&spi->dev, "RXS timed out\n");
|
||
goto out;
|
||
}
|
||
|
||
if (c == 1 && tx == NULL &&
|
||
(l & OMAP2_MCSPI_CHCONF_TURBO)) {
|
||
omap2_mcspi_set_enable(spi, 0);
|
||
*rx++ = readl_relaxed(rx_reg);
|
||
dev_vdbg(&spi->dev, "read-%d %02x\n",
|
||
word_len, *(rx - 1));
|
||
if (mcspi_wait_for_reg_bit(chstat_reg,
|
||
OMAP2_MCSPI_CHSTAT_RXS) < 0) {
|
||
dev_err(&spi->dev,
|
||
"RXS timed out\n");
|
||
goto out;
|
||
}
|
||
c = 0;
|
||
} else if (c == 0 && tx == NULL) {
|
||
omap2_mcspi_set_enable(spi, 0);
|
||
}
|
||
|
||
*rx++ = readl_relaxed(rx_reg);
|
||
dev_vdbg(&spi->dev, "read-%d %02x\n",
|
||
word_len, *(rx - 1));
|
||
}
|
||
} while (c);
|
||
} else if (word_len <= 16) {
|
||
u16 *rx;
|
||
const u16 *tx;
|
||
|
||
rx = xfer->rx_buf;
|
||
tx = xfer->tx_buf;
|
||
do {
|
||
c -= 2;
|
||
if (tx != NULL) {
|
||
if (mcspi_wait_for_reg_bit(chstat_reg,
|
||
OMAP2_MCSPI_CHSTAT_TXS) < 0) {
|
||
dev_err(&spi->dev, "TXS timed out\n");
|
||
goto out;
|
||
}
|
||
dev_vdbg(&spi->dev, "write-%d %04x\n",
|
||
word_len, *tx);
|
||
writel_relaxed(*tx++, tx_reg);
|
||
}
|
||
if (rx != NULL) {
|
||
if (mcspi_wait_for_reg_bit(chstat_reg,
|
||
OMAP2_MCSPI_CHSTAT_RXS) < 0) {
|
||
dev_err(&spi->dev, "RXS timed out\n");
|
||
goto out;
|
||
}
|
||
|
||
if (c == 2 && tx == NULL &&
|
||
(l & OMAP2_MCSPI_CHCONF_TURBO)) {
|
||
omap2_mcspi_set_enable(spi, 0);
|
||
*rx++ = readl_relaxed(rx_reg);
|
||
dev_vdbg(&spi->dev, "read-%d %04x\n",
|
||
word_len, *(rx - 1));
|
||
if (mcspi_wait_for_reg_bit(chstat_reg,
|
||
OMAP2_MCSPI_CHSTAT_RXS) < 0) {
|
||
dev_err(&spi->dev,
|
||
"RXS timed out\n");
|
||
goto out;
|
||
}
|
||
c = 0;
|
||
} else if (c == 0 && tx == NULL) {
|
||
omap2_mcspi_set_enable(spi, 0);
|
||
}
|
||
|
||
*rx++ = readl_relaxed(rx_reg);
|
||
dev_vdbg(&spi->dev, "read-%d %04x\n",
|
||
word_len, *(rx - 1));
|
||
}
|
||
} while (c >= 2);
|
||
} else if (word_len <= 32) {
|
||
u32 *rx;
|
||
const u32 *tx;
|
||
|
||
rx = xfer->rx_buf;
|
||
tx = xfer->tx_buf;
|
||
do {
|
||
c -= 4;
|
||
if (tx != NULL) {
|
||
if (mcspi_wait_for_reg_bit(chstat_reg,
|
||
OMAP2_MCSPI_CHSTAT_TXS) < 0) {
|
||
dev_err(&spi->dev, "TXS timed out\n");
|
||
goto out;
|
||
}
|
||
dev_vdbg(&spi->dev, "write-%d %08x\n",
|
||
word_len, *tx);
|
||
writel_relaxed(*tx++, tx_reg);
|
||
}
|
||
if (rx != NULL) {
|
||
if (mcspi_wait_for_reg_bit(chstat_reg,
|
||
OMAP2_MCSPI_CHSTAT_RXS) < 0) {
|
||
dev_err(&spi->dev, "RXS timed out\n");
|
||
goto out;
|
||
}
|
||
|
||
if (c == 4 && tx == NULL &&
|
||
(l & OMAP2_MCSPI_CHCONF_TURBO)) {
|
||
omap2_mcspi_set_enable(spi, 0);
|
||
*rx++ = readl_relaxed(rx_reg);
|
||
dev_vdbg(&spi->dev, "read-%d %08x\n",
|
||
word_len, *(rx - 1));
|
||
if (mcspi_wait_for_reg_bit(chstat_reg,
|
||
OMAP2_MCSPI_CHSTAT_RXS) < 0) {
|
||
dev_err(&spi->dev,
|
||
"RXS timed out\n");
|
||
goto out;
|
||
}
|
||
c = 0;
|
||
} else if (c == 0 && tx == NULL) {
|
||
omap2_mcspi_set_enable(spi, 0);
|
||
}
|
||
|
||
*rx++ = readl_relaxed(rx_reg);
|
||
dev_vdbg(&spi->dev, "read-%d %08x\n",
|
||
word_len, *(rx - 1));
|
||
}
|
||
} while (c >= 4);
|
||
}
|
||
|
||
/* for TX_ONLY mode, be sure all words have shifted out */
|
||
if (xfer->rx_buf == NULL) {
|
||
if (mcspi_wait_for_reg_bit(chstat_reg,
|
||
OMAP2_MCSPI_CHSTAT_TXS) < 0) {
|
||
dev_err(&spi->dev, "TXS timed out\n");
|
||
} else if (mcspi_wait_for_reg_bit(chstat_reg,
|
||
OMAP2_MCSPI_CHSTAT_EOT) < 0)
|
||
dev_err(&spi->dev, "EOT timed out\n");
|
||
|
||
/* disable chan to purge rx datas received in TX_ONLY transfer,
|
||
* otherwise these rx datas will affect the direct following
|
||
* RX_ONLY transfer.
|
||
*/
|
||
omap2_mcspi_set_enable(spi, 0);
|
||
}
|
||
out:
|
||
omap2_mcspi_set_enable(spi, 1);
|
||
return count - c;
|
||
}
|
||
|
||
static u32 omap2_mcspi_calc_divisor(u32 speed_hz)
|
||
{
|
||
u32 div;
|
||
|
||
for (div = 0; div < 15; div++)
|
||
if (speed_hz >= (OMAP2_MCSPI_MAX_FREQ >> div))
|
||
return div;
|
||
|
||
return 15;
|
||
}
|
||
|
||
/* called only when no transfer is active to this device */
|
||
static int omap2_mcspi_setup_transfer(struct spi_device *spi,
|
||
struct spi_transfer *t)
|
||
{
|
||
struct omap2_mcspi_cs *cs = spi->controller_state;
|
||
struct omap2_mcspi *mcspi;
|
||
u32 l = 0, clkd = 0, div, extclk = 0, clkg = 0;
|
||
u8 word_len = spi->bits_per_word;
|
||
u32 speed_hz = spi->max_speed_hz;
|
||
|
||
mcspi = spi_master_get_devdata(spi->master);
|
||
|
||
if (t != NULL && t->bits_per_word)
|
||
word_len = t->bits_per_word;
|
||
|
||
cs->word_len = word_len;
|
||
|
||
if (t && t->speed_hz)
|
||
speed_hz = t->speed_hz;
|
||
|
||
speed_hz = min_t(u32, speed_hz, OMAP2_MCSPI_MAX_FREQ);
|
||
if (speed_hz < (OMAP2_MCSPI_MAX_FREQ / OMAP2_MCSPI_MAX_DIVIDER)) {
|
||
clkd = omap2_mcspi_calc_divisor(speed_hz);
|
||
speed_hz = OMAP2_MCSPI_MAX_FREQ >> clkd;
|
||
clkg = 0;
|
||
} else {
|
||
div = (OMAP2_MCSPI_MAX_FREQ + speed_hz - 1) / speed_hz;
|
||
speed_hz = OMAP2_MCSPI_MAX_FREQ / div;
|
||
clkd = (div - 1) & 0xf;
|
||
extclk = (div - 1) >> 4;
|
||
clkg = OMAP2_MCSPI_CHCONF_CLKG;
|
||
}
|
||
|
||
l = mcspi_cached_chconf0(spi);
|
||
|
||
/* standard 4-wire master mode: SCK, MOSI/out, MISO/in, nCS
|
||
* REVISIT: this controller could support SPI_3WIRE mode.
|
||
*/
|
||
if (mcspi->pin_dir == MCSPI_PINDIR_D0_IN_D1_OUT) {
|
||
l &= ~OMAP2_MCSPI_CHCONF_IS;
|
||
l &= ~OMAP2_MCSPI_CHCONF_DPE1;
|
||
l |= OMAP2_MCSPI_CHCONF_DPE0;
|
||
} else {
|
||
l |= OMAP2_MCSPI_CHCONF_IS;
|
||
l |= OMAP2_MCSPI_CHCONF_DPE1;
|
||
l &= ~OMAP2_MCSPI_CHCONF_DPE0;
|
||
}
|
||
|
||
/* wordlength */
|
||
l &= ~OMAP2_MCSPI_CHCONF_WL_MASK;
|
||
l |= (word_len - 1) << 7;
|
||
|
||
/* set chipselect polarity; manage with FORCE */
|
||
if (!(spi->mode & SPI_CS_HIGH))
|
||
l |= OMAP2_MCSPI_CHCONF_EPOL; /* active-low; normal */
|
||
else
|
||
l &= ~OMAP2_MCSPI_CHCONF_EPOL;
|
||
|
||
/* set clock divisor */
|
||
l &= ~OMAP2_MCSPI_CHCONF_CLKD_MASK;
|
||
l |= clkd << 2;
|
||
|
||
/* set clock granularity */
|
||
l &= ~OMAP2_MCSPI_CHCONF_CLKG;
|
||
l |= clkg;
|
||
if (clkg) {
|
||
cs->chctrl0 &= ~OMAP2_MCSPI_CHCTRL_EXTCLK_MASK;
|
||
cs->chctrl0 |= extclk << 8;
|
||
mcspi_write_cs_reg(spi, OMAP2_MCSPI_CHCTRL0, cs->chctrl0);
|
||
}
|
||
|
||
/* set SPI mode 0..3 */
|
||
if (spi->mode & SPI_CPOL)
|
||
l |= OMAP2_MCSPI_CHCONF_POL;
|
||
else
|
||
l &= ~OMAP2_MCSPI_CHCONF_POL;
|
||
if (spi->mode & SPI_CPHA)
|
||
l |= OMAP2_MCSPI_CHCONF_PHA;
|
||
else
|
||
l &= ~OMAP2_MCSPI_CHCONF_PHA;
|
||
|
||
mcspi_write_chconf0(spi, l);
|
||
|
||
cs->mode = spi->mode;
|
||
|
||
dev_dbg(&spi->dev, "setup: speed %d, sample %s edge, clk %s\n",
|
||
speed_hz,
|
||
(spi->mode & SPI_CPHA) ? "trailing" : "leading",
|
||
(spi->mode & SPI_CPOL) ? "inverted" : "normal");
|
||
|
||
return 0;
|
||
}
|
||
|
||
/*
|
||
* Note that we currently allow DMA only if we get a channel
|
||
* for both rx and tx. Otherwise we'll do PIO for both rx and tx.
|
||
*/
|
||
static int omap2_mcspi_request_dma(struct spi_device *spi)
|
||
{
|
||
struct spi_master *master = spi->master;
|
||
struct omap2_mcspi *mcspi;
|
||
struct omap2_mcspi_dma *mcspi_dma;
|
||
int ret = 0;
|
||
|
||
mcspi = spi_master_get_devdata(master);
|
||
mcspi_dma = mcspi->dma_channels + spi->chip_select;
|
||
|
||
init_completion(&mcspi_dma->dma_rx_completion);
|
||
init_completion(&mcspi_dma->dma_tx_completion);
|
||
|
||
mcspi_dma->dma_rx = dma_request_chan(&master->dev,
|
||
mcspi_dma->dma_rx_ch_name);
|
||
if (IS_ERR(mcspi_dma->dma_rx)) {
|
||
ret = PTR_ERR(mcspi_dma->dma_rx);
|
||
mcspi_dma->dma_rx = NULL;
|
||
goto no_dma;
|
||
}
|
||
|
||
mcspi_dma->dma_tx = dma_request_chan(&master->dev,
|
||
mcspi_dma->dma_tx_ch_name);
|
||
if (IS_ERR(mcspi_dma->dma_tx)) {
|
||
ret = PTR_ERR(mcspi_dma->dma_tx);
|
||
mcspi_dma->dma_tx = NULL;
|
||
dma_release_channel(mcspi_dma->dma_rx);
|
||
mcspi_dma->dma_rx = NULL;
|
||
}
|
||
|
||
no_dma:
|
||
return ret;
|
||
}
|
||
|
||
static int omap2_mcspi_setup(struct spi_device *spi)
|
||
{
|
||
int ret;
|
||
struct omap2_mcspi *mcspi = spi_master_get_devdata(spi->master);
|
||
struct omap2_mcspi_regs *ctx = &mcspi->ctx;
|
||
struct omap2_mcspi_dma *mcspi_dma;
|
||
struct omap2_mcspi_cs *cs = spi->controller_state;
|
||
|
||
mcspi_dma = &mcspi->dma_channels[spi->chip_select];
|
||
|
||
if (!cs) {
|
||
cs = kzalloc(sizeof *cs, GFP_KERNEL);
|
||
if (!cs)
|
||
return -ENOMEM;
|
||
cs->base = mcspi->base + spi->chip_select * 0x14;
|
||
cs->phys = mcspi->phys + spi->chip_select * 0x14;
|
||
cs->mode = 0;
|
||
cs->chconf0 = 0;
|
||
cs->chctrl0 = 0;
|
||
spi->controller_state = cs;
|
||
/* Link this to context save list */
|
||
list_add_tail(&cs->node, &ctx->cs);
|
||
|
||
if (gpio_is_valid(spi->cs_gpio)) {
|
||
ret = gpio_request(spi->cs_gpio, dev_name(&spi->dev));
|
||
if (ret) {
|
||
dev_err(&spi->dev, "failed to request gpio\n");
|
||
return ret;
|
||
}
|
||
gpio_direction_output(spi->cs_gpio,
|
||
!(spi->mode & SPI_CS_HIGH));
|
||
}
|
||
}
|
||
|
||
if (!mcspi_dma->dma_rx || !mcspi_dma->dma_tx) {
|
||
ret = omap2_mcspi_request_dma(spi);
|
||
if (ret)
|
||
dev_warn(&spi->dev, "not using DMA for McSPI (%d)\n",
|
||
ret);
|
||
}
|
||
|
||
ret = pm_runtime_get_sync(mcspi->dev);
|
||
if (ret < 0) {
|
||
pm_runtime_put_noidle(mcspi->dev);
|
||
|
||
return ret;
|
||
}
|
||
|
||
ret = omap2_mcspi_setup_transfer(spi, NULL);
|
||
pm_runtime_mark_last_busy(mcspi->dev);
|
||
pm_runtime_put_autosuspend(mcspi->dev);
|
||
|
||
return ret;
|
||
}
|
||
|
||
static void omap2_mcspi_cleanup(struct spi_device *spi)
|
||
{
|
||
struct omap2_mcspi *mcspi;
|
||
struct omap2_mcspi_dma *mcspi_dma;
|
||
struct omap2_mcspi_cs *cs;
|
||
|
||
mcspi = spi_master_get_devdata(spi->master);
|
||
|
||
if (spi->controller_state) {
|
||
/* Unlink controller state from context save list */
|
||
cs = spi->controller_state;
|
||
list_del(&cs->node);
|
||
|
||
kfree(cs);
|
||
}
|
||
|
||
if (spi->chip_select < spi->master->num_chipselect) {
|
||
mcspi_dma = &mcspi->dma_channels[spi->chip_select];
|
||
|
||
if (mcspi_dma->dma_rx) {
|
||
dma_release_channel(mcspi_dma->dma_rx);
|
||
mcspi_dma->dma_rx = NULL;
|
||
}
|
||
if (mcspi_dma->dma_tx) {
|
||
dma_release_channel(mcspi_dma->dma_tx);
|
||
mcspi_dma->dma_tx = NULL;
|
||
}
|
||
}
|
||
|
||
if (gpio_is_valid(spi->cs_gpio))
|
||
gpio_free(spi->cs_gpio);
|
||
}
|
||
|
||
static irqreturn_t omap2_mcspi_irq_handler(int irq, void *data)
|
||
{
|
||
struct omap2_mcspi *mcspi = data;
|
||
u32 irqstat;
|
||
|
||
irqstat = mcspi_read_reg(mcspi->master, OMAP2_MCSPI_IRQSTATUS);
|
||
if (!irqstat)
|
||
return IRQ_NONE;
|
||
|
||
/* Disable IRQ and wakeup slave xfer task */
|
||
mcspi_write_reg(mcspi->master, OMAP2_MCSPI_IRQENABLE, 0);
|
||
if (irqstat & OMAP2_MCSPI_IRQSTATUS_EOW)
|
||
complete(&mcspi->txdone);
|
||
|
||
return IRQ_HANDLED;
|
||
}
|
||
|
||
static int omap2_mcspi_slave_abort(struct spi_master *master)
|
||
{
|
||
struct omap2_mcspi *mcspi = spi_master_get_devdata(master);
|
||
struct omap2_mcspi_dma *mcspi_dma = mcspi->dma_channels;
|
||
|
||
mcspi->slave_aborted = true;
|
||
complete(&mcspi_dma->dma_rx_completion);
|
||
complete(&mcspi_dma->dma_tx_completion);
|
||
complete(&mcspi->txdone);
|
||
|
||
return 0;
|
||
}
|
||
|
||
static int omap2_mcspi_transfer_one(struct spi_master *master,
|
||
struct spi_device *spi,
|
||
struct spi_transfer *t)
|
||
{
|
||
|
||
/* We only enable one channel at a time -- the one whose message is
|
||
* -- although this controller would gladly
|
||
* arbitrate among multiple channels. This corresponds to "single
|
||
* channel" master mode. As a side effect, we need to manage the
|
||
* chipselect with the FORCE bit ... CS != channel enable.
|
||
*/
|
||
|
||
struct omap2_mcspi *mcspi;
|
||
struct omap2_mcspi_dma *mcspi_dma;
|
||
struct omap2_mcspi_cs *cs;
|
||
struct omap2_mcspi_device_config *cd;
|
||
int par_override = 0;
|
||
int status = 0;
|
||
u32 chconf;
|
||
|
||
mcspi = spi_master_get_devdata(master);
|
||
mcspi_dma = mcspi->dma_channels + spi->chip_select;
|
||
cs = spi->controller_state;
|
||
cd = spi->controller_data;
|
||
|
||
/*
|
||
* The slave driver could have changed spi->mode in which case
|
||
* it will be different from cs->mode (the current hardware setup).
|
||
* If so, set par_override (even though its not a parity issue) so
|
||
* omap2_mcspi_setup_transfer will be called to configure the hardware
|
||
* with the correct mode on the first iteration of the loop below.
|
||
*/
|
||
if (spi->mode != cs->mode)
|
||
par_override = 1;
|
||
|
||
omap2_mcspi_set_enable(spi, 0);
|
||
|
||
if (gpio_is_valid(spi->cs_gpio))
|
||
omap2_mcspi_set_cs(spi, spi->mode & SPI_CS_HIGH);
|
||
|
||
if (par_override ||
|
||
(t->speed_hz != spi->max_speed_hz) ||
|
||
(t->bits_per_word != spi->bits_per_word)) {
|
||
par_override = 1;
|
||
status = omap2_mcspi_setup_transfer(spi, t);
|
||
if (status < 0)
|
||
goto out;
|
||
if (t->speed_hz == spi->max_speed_hz &&
|
||
t->bits_per_word == spi->bits_per_word)
|
||
par_override = 0;
|
||
}
|
||
if (cd && cd->cs_per_word) {
|
||
chconf = mcspi->ctx.modulctrl;
|
||
chconf &= ~OMAP2_MCSPI_MODULCTRL_SINGLE;
|
||
mcspi_write_reg(master, OMAP2_MCSPI_MODULCTRL, chconf);
|
||
mcspi->ctx.modulctrl =
|
||
mcspi_read_cs_reg(spi, OMAP2_MCSPI_MODULCTRL);
|
||
}
|
||
|
||
chconf = mcspi_cached_chconf0(spi);
|
||
chconf &= ~OMAP2_MCSPI_CHCONF_TRM_MASK;
|
||
chconf &= ~OMAP2_MCSPI_CHCONF_TURBO;
|
||
|
||
if (t->tx_buf == NULL)
|
||
chconf |= OMAP2_MCSPI_CHCONF_TRM_RX_ONLY;
|
||
else if (t->rx_buf == NULL)
|
||
chconf |= OMAP2_MCSPI_CHCONF_TRM_TX_ONLY;
|
||
|
||
if (cd && cd->turbo_mode && t->tx_buf == NULL) {
|
||
/* Turbo mode is for more than one word */
|
||
if (t->len > ((cs->word_len + 7) >> 3))
|
||
chconf |= OMAP2_MCSPI_CHCONF_TURBO;
|
||
}
|
||
|
||
mcspi_write_chconf0(spi, chconf);
|
||
|
||
if (t->len) {
|
||
unsigned count;
|
||
|
||
if ((mcspi_dma->dma_rx && mcspi_dma->dma_tx) &&
|
||
master->cur_msg_mapped &&
|
||
master->can_dma(master, spi, t))
|
||
omap2_mcspi_set_fifo(spi, t, 1);
|
||
|
||
omap2_mcspi_set_enable(spi, 1);
|
||
|
||
/* RX_ONLY mode needs dummy data in TX reg */
|
||
if (t->tx_buf == NULL)
|
||
writel_relaxed(0, cs->base
|
||
+ OMAP2_MCSPI_TX0);
|
||
|
||
if ((mcspi_dma->dma_rx && mcspi_dma->dma_tx) &&
|
||
master->cur_msg_mapped &&
|
||
master->can_dma(master, spi, t))
|
||
count = omap2_mcspi_txrx_dma(spi, t);
|
||
else
|
||
count = omap2_mcspi_txrx_pio(spi, t);
|
||
|
||
if (count != t->len) {
|
||
status = -EIO;
|
||
goto out;
|
||
}
|
||
}
|
||
|
||
omap2_mcspi_set_enable(spi, 0);
|
||
|
||
if (mcspi->fifo_depth > 0)
|
||
omap2_mcspi_set_fifo(spi, t, 0);
|
||
|
||
out:
|
||
/* Restore defaults if they were overriden */
|
||
if (par_override) {
|
||
par_override = 0;
|
||
status = omap2_mcspi_setup_transfer(spi, NULL);
|
||
}
|
||
|
||
if (cd && cd->cs_per_word) {
|
||
chconf = mcspi->ctx.modulctrl;
|
||
chconf |= OMAP2_MCSPI_MODULCTRL_SINGLE;
|
||
mcspi_write_reg(master, OMAP2_MCSPI_MODULCTRL, chconf);
|
||
mcspi->ctx.modulctrl =
|
||
mcspi_read_cs_reg(spi, OMAP2_MCSPI_MODULCTRL);
|
||
}
|
||
|
||
omap2_mcspi_set_enable(spi, 0);
|
||
|
||
if (gpio_is_valid(spi->cs_gpio))
|
||
omap2_mcspi_set_cs(spi, !(spi->mode & SPI_CS_HIGH));
|
||
|
||
if (mcspi->fifo_depth > 0 && t)
|
||
omap2_mcspi_set_fifo(spi, t, 0);
|
||
|
||
return status;
|
||
}
|
||
|
||
static int omap2_mcspi_prepare_message(struct spi_master *master,
|
||
struct spi_message *msg)
|
||
{
|
||
struct omap2_mcspi *mcspi = spi_master_get_devdata(master);
|
||
struct omap2_mcspi_regs *ctx = &mcspi->ctx;
|
||
struct omap2_mcspi_cs *cs;
|
||
|
||
/* Only a single channel can have the FORCE bit enabled
|
||
* in its chconf0 register.
|
||
* Scan all channels and disable them except the current one.
|
||
* A FORCE can remain from a last transfer having cs_change enabled
|
||
*/
|
||
list_for_each_entry(cs, &ctx->cs, node) {
|
||
if (msg->spi->controller_state == cs)
|
||
continue;
|
||
|
||
if ((cs->chconf0 & OMAP2_MCSPI_CHCONF_FORCE)) {
|
||
cs->chconf0 &= ~OMAP2_MCSPI_CHCONF_FORCE;
|
||
writel_relaxed(cs->chconf0,
|
||
cs->base + OMAP2_MCSPI_CHCONF0);
|
||
readl_relaxed(cs->base + OMAP2_MCSPI_CHCONF0);
|
||
}
|
||
}
|
||
|
||
return 0;
|
||
}
|
||
|
||
static bool omap2_mcspi_can_dma(struct spi_master *master,
|
||
struct spi_device *spi,
|
||
struct spi_transfer *xfer)
|
||
{
|
||
struct omap2_mcspi *mcspi = spi_master_get_devdata(spi->master);
|
||
struct omap2_mcspi_dma *mcspi_dma =
|
||
&mcspi->dma_channels[spi->chip_select];
|
||
|
||
if (!mcspi_dma->dma_rx || !mcspi_dma->dma_tx)
|
||
return false;
|
||
|
||
if (spi_controller_is_slave(master))
|
||
return true;
|
||
|
||
return (xfer->len >= DMA_MIN_BYTES);
|
||
}
|
||
|
||
static int omap2_mcspi_controller_setup(struct omap2_mcspi *mcspi)
|
||
{
|
||
struct spi_master *master = mcspi->master;
|
||
struct omap2_mcspi_regs *ctx = &mcspi->ctx;
|
||
int ret = 0;
|
||
|
||
ret = pm_runtime_get_sync(mcspi->dev);
|
||
if (ret < 0) {
|
||
pm_runtime_put_noidle(mcspi->dev);
|
||
|
||
return ret;
|
||
}
|
||
|
||
mcspi_write_reg(master, OMAP2_MCSPI_WAKEUPENABLE,
|
||
OMAP2_MCSPI_WAKEUPENABLE_WKEN);
|
||
ctx->wakeupenable = OMAP2_MCSPI_WAKEUPENABLE_WKEN;
|
||
|
||
omap2_mcspi_set_mode(master);
|
||
pm_runtime_mark_last_busy(mcspi->dev);
|
||
pm_runtime_put_autosuspend(mcspi->dev);
|
||
return 0;
|
||
}
|
||
|
||
/*
|
||
* When SPI wake up from off-mode, CS is in activate state. If it was in
|
||
* inactive state when driver was suspend, then force it to inactive state at
|
||
* wake up.
|
||
*/
|
||
static int omap_mcspi_runtime_resume(struct device *dev)
|
||
{
|
||
struct spi_master *master = dev_get_drvdata(dev);
|
||
struct omap2_mcspi *mcspi = spi_master_get_devdata(master);
|
||
struct omap2_mcspi_regs *ctx = &mcspi->ctx;
|
||
struct omap2_mcspi_cs *cs;
|
||
|
||
/* McSPI: context restore */
|
||
mcspi_write_reg(master, OMAP2_MCSPI_MODULCTRL, ctx->modulctrl);
|
||
mcspi_write_reg(master, OMAP2_MCSPI_WAKEUPENABLE, ctx->wakeupenable);
|
||
|
||
list_for_each_entry(cs, &ctx->cs, node) {
|
||
/*
|
||
* We need to toggle CS state for OMAP take this
|
||
* change in account.
|
||
*/
|
||
if ((cs->chconf0 & OMAP2_MCSPI_CHCONF_FORCE) == 0) {
|
||
cs->chconf0 |= OMAP2_MCSPI_CHCONF_FORCE;
|
||
writel_relaxed(cs->chconf0,
|
||
cs->base + OMAP2_MCSPI_CHCONF0);
|
||
cs->chconf0 &= ~OMAP2_MCSPI_CHCONF_FORCE;
|
||
writel_relaxed(cs->chconf0,
|
||
cs->base + OMAP2_MCSPI_CHCONF0);
|
||
} else {
|
||
writel_relaxed(cs->chconf0,
|
||
cs->base + OMAP2_MCSPI_CHCONF0);
|
||
}
|
||
}
|
||
|
||
return 0;
|
||
}
|
||
|
||
static struct omap2_mcspi_platform_config omap2_pdata = {
|
||
.regs_offset = 0,
|
||
};
|
||
|
||
static struct omap2_mcspi_platform_config omap4_pdata = {
|
||
.regs_offset = OMAP4_MCSPI_REG_OFFSET,
|
||
};
|
||
|
||
static const struct of_device_id omap_mcspi_of_match[] = {
|
||
{
|
||
.compatible = "ti,omap2-mcspi",
|
||
.data = &omap2_pdata,
|
||
},
|
||
{
|
||
.compatible = "ti,omap4-mcspi",
|
||
.data = &omap4_pdata,
|
||
},
|
||
{ },
|
||
};
|
||
MODULE_DEVICE_TABLE(of, omap_mcspi_of_match);
|
||
|
||
static int omap2_mcspi_probe(struct platform_device *pdev)
|
||
{
|
||
struct spi_master *master;
|
||
const struct omap2_mcspi_platform_config *pdata;
|
||
struct omap2_mcspi *mcspi;
|
||
struct resource *r;
|
||
int status = 0, i;
|
||
u32 regs_offset = 0;
|
||
struct device_node *node = pdev->dev.of_node;
|
||
const struct of_device_id *match;
|
||
|
||
if (of_property_read_bool(node, "spi-slave"))
|
||
master = spi_alloc_slave(&pdev->dev, sizeof(*mcspi));
|
||
else
|
||
master = spi_alloc_master(&pdev->dev, sizeof(*mcspi));
|
||
if (!master)
|
||
return -ENOMEM;
|
||
|
||
/* the spi->mode bits understood by this driver: */
|
||
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
|
||
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32);
|
||
master->setup = omap2_mcspi_setup;
|
||
master->auto_runtime_pm = true;
|
||
master->prepare_message = omap2_mcspi_prepare_message;
|
||
master->can_dma = omap2_mcspi_can_dma;
|
||
master->transfer_one = omap2_mcspi_transfer_one;
|
||
master->set_cs = omap2_mcspi_set_cs;
|
||
master->cleanup = omap2_mcspi_cleanup;
|
||
master->slave_abort = omap2_mcspi_slave_abort;
|
||
master->dev.of_node = node;
|
||
master->max_speed_hz = OMAP2_MCSPI_MAX_FREQ;
|
||
master->min_speed_hz = OMAP2_MCSPI_MAX_FREQ >> 15;
|
||
|
||
platform_set_drvdata(pdev, master);
|
||
|
||
mcspi = spi_master_get_devdata(master);
|
||
mcspi->master = master;
|
||
|
||
match = of_match_device(omap_mcspi_of_match, &pdev->dev);
|
||
if (match) {
|
||
u32 num_cs = 1; /* default number of chipselect */
|
||
pdata = match->data;
|
||
|
||
of_property_read_u32(node, "ti,spi-num-cs", &num_cs);
|
||
master->num_chipselect = num_cs;
|
||
if (of_get_property(node, "ti,pindir-d0-out-d1-in", NULL))
|
||
mcspi->pin_dir = MCSPI_PINDIR_D0_OUT_D1_IN;
|
||
} else {
|
||
pdata = dev_get_platdata(&pdev->dev);
|
||
master->num_chipselect = pdata->num_cs;
|
||
mcspi->pin_dir = pdata->pin_dir;
|
||
}
|
||
regs_offset = pdata->regs_offset;
|
||
|
||
r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
|
||
mcspi->base = devm_ioremap_resource(&pdev->dev, r);
|
||
if (IS_ERR(mcspi->base)) {
|
||
status = PTR_ERR(mcspi->base);
|
||
goto free_master;
|
||
}
|
||
mcspi->phys = r->start + regs_offset;
|
||
mcspi->base += regs_offset;
|
||
|
||
mcspi->dev = &pdev->dev;
|
||
|
||
INIT_LIST_HEAD(&mcspi->ctx.cs);
|
||
|
||
mcspi->dma_channels = devm_kcalloc(&pdev->dev, master->num_chipselect,
|
||
sizeof(struct omap2_mcspi_dma),
|
||
GFP_KERNEL);
|
||
if (mcspi->dma_channels == NULL) {
|
||
status = -ENOMEM;
|
||
goto free_master;
|
||
}
|
||
|
||
for (i = 0; i < master->num_chipselect; i++) {
|
||
sprintf(mcspi->dma_channels[i].dma_rx_ch_name, "rx%d", i);
|
||
sprintf(mcspi->dma_channels[i].dma_tx_ch_name, "tx%d", i);
|
||
}
|
||
|
||
status = platform_get_irq(pdev, 0);
|
||
if (status == -EPROBE_DEFER)
|
||
goto free_master;
|
||
if (status < 0) {
|
||
dev_err(&pdev->dev, "no irq resource found\n");
|
||
goto free_master;
|
||
}
|
||
init_completion(&mcspi->txdone);
|
||
status = devm_request_irq(&pdev->dev, status,
|
||
omap2_mcspi_irq_handler, 0, pdev->name,
|
||
mcspi);
|
||
if (status) {
|
||
dev_err(&pdev->dev, "Cannot request IRQ");
|
||
goto free_master;
|
||
}
|
||
|
||
pm_runtime_use_autosuspend(&pdev->dev);
|
||
pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_AUTOSUSPEND_TIMEOUT);
|
||
pm_runtime_enable(&pdev->dev);
|
||
|
||
status = omap2_mcspi_controller_setup(mcspi);
|
||
if (status < 0)
|
||
goto disable_pm;
|
||
|
||
status = devm_spi_register_controller(&pdev->dev, master);
|
||
if (status < 0)
|
||
goto disable_pm;
|
||
|
||
return status;
|
||
|
||
disable_pm:
|
||
pm_runtime_dont_use_autosuspend(&pdev->dev);
|
||
pm_runtime_put_sync(&pdev->dev);
|
||
pm_runtime_disable(&pdev->dev);
|
||
free_master:
|
||
spi_master_put(master);
|
||
return status;
|
||
}
|
||
|
||
static int omap2_mcspi_remove(struct platform_device *pdev)
|
||
{
|
||
struct spi_master *master = platform_get_drvdata(pdev);
|
||
struct omap2_mcspi *mcspi = spi_master_get_devdata(master);
|
||
|
||
pm_runtime_dont_use_autosuspend(mcspi->dev);
|
||
pm_runtime_put_sync(mcspi->dev);
|
||
pm_runtime_disable(&pdev->dev);
|
||
|
||
return 0;
|
||
}
|
||
|
||
/* work with hotplug and coldplug */
|
||
MODULE_ALIAS("platform:omap2_mcspi");
|
||
|
||
static int __maybe_unused omap2_mcspi_suspend(struct device *dev)
|
||
{
|
||
struct spi_master *master = dev_get_drvdata(dev);
|
||
struct omap2_mcspi *mcspi = spi_master_get_devdata(master);
|
||
int error;
|
||
|
||
error = pinctrl_pm_select_sleep_state(dev);
|
||
if (error)
|
||
dev_warn(mcspi->dev, "%s: failed to set pins: %i\n",
|
||
__func__, error);
|
||
|
||
error = spi_master_suspend(master);
|
||
if (error)
|
||
dev_warn(mcspi->dev, "%s: master suspend failed: %i\n",
|
||
__func__, error);
|
||
|
||
return pm_runtime_force_suspend(dev);
|
||
}
|
||
|
||
static int __maybe_unused omap2_mcspi_resume(struct device *dev)
|
||
{
|
||
struct spi_master *master = dev_get_drvdata(dev);
|
||
struct omap2_mcspi *mcspi = spi_master_get_devdata(master);
|
||
int error;
|
||
|
||
error = pinctrl_pm_select_default_state(dev);
|
||
if (error)
|
||
dev_warn(mcspi->dev, "%s: failed to set pins: %i\n",
|
||
__func__, error);
|
||
|
||
error = spi_master_resume(master);
|
||
if (error)
|
||
dev_warn(mcspi->dev, "%s: master resume failed: %i\n",
|
||
__func__, error);
|
||
|
||
return pm_runtime_force_resume(dev);
|
||
}
|
||
|
||
static const struct dev_pm_ops omap2_mcspi_pm_ops = {
|
||
SET_SYSTEM_SLEEP_PM_OPS(omap2_mcspi_suspend,
|
||
omap2_mcspi_resume)
|
||
.runtime_resume = omap_mcspi_runtime_resume,
|
||
};
|
||
|
||
static struct platform_driver omap2_mcspi_driver = {
|
||
.driver = {
|
||
.name = "omap2_mcspi",
|
||
.pm = &omap2_mcspi_pm_ops,
|
||
.of_match_table = omap_mcspi_of_match,
|
||
},
|
||
.probe = omap2_mcspi_probe,
|
||
.remove = omap2_mcspi_remove,
|
||
};
|
||
|
||
module_platform_driver(omap2_mcspi_driver);
|
||
MODULE_LICENSE("GPL");
|