linux-sg2042/drivers/usb/storage/debug.c

180 lines
7.1 KiB
C

/* Driver for USB Mass Storage compliant devices
* Debugging Functions Source Code File
*
* $Id: debug.c,v 1.9 2002/04/22 03:39:43 mdharm Exp $
*
* Current development and maintenance by:
* (c) 1999-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
*
* Developed with the assistance of:
* (c) 2002 Alan Stern <stern@rowland.org>
*
* Initial work by:
* (c) 1999 Michael Gee (michael@linuxspecific.com)
*
* This driver is based on the 'USB Mass Storage Class' document. This
* describes in detail the protocol used to communicate with such
* devices. Clearly, the designers had SCSI and ATAPI commands in
* mind when they created this document. The commands are all very
* similar to commands in the SCSI-II and ATAPI specifications.
*
* It is important to note that in a number of cases this class
* exhibits class-specific exemptions from the USB specification.
* Notably the usage of NAK, STALL and ACK differs from the norm, in
* that they are used to communicate wait, failed and OK on commands.
*
* Also, for certain devices, the interrupt endpoint is used to convey
* status of a command.
*
* Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
* information about this driver.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2, or (at your option) any
* later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include <linux/cdrom.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
#include <scsi/scsi_dbg.h>
#include "debug.h"
#include "scsi.h"
void usb_stor_show_command(struct scsi_cmnd *srb)
{
char *what = NULL;
int i;
switch (srb->cmnd[0]) {
case TEST_UNIT_READY: what = "TEST_UNIT_READY"; break;
case REZERO_UNIT: what = "REZERO_UNIT"; break;
case REQUEST_SENSE: what = "REQUEST_SENSE"; break;
case FORMAT_UNIT: what = "FORMAT_UNIT"; break;
case READ_BLOCK_LIMITS: what = "READ_BLOCK_LIMITS"; break;
case REASSIGN_BLOCKS: what = "REASSIGN_BLOCKS"; break;
case READ_6: what = "READ_6"; break;
case WRITE_6: what = "WRITE_6"; break;
case SEEK_6: what = "SEEK_6"; break;
case READ_REVERSE: what = "READ_REVERSE"; break;
case WRITE_FILEMARKS: what = "WRITE_FILEMARKS"; break;
case SPACE: what = "SPACE"; break;
case INQUIRY: what = "INQUIRY"; break;
case RECOVER_BUFFERED_DATA: what = "RECOVER_BUFFERED_DATA"; break;
case MODE_SELECT: what = "MODE_SELECT"; break;
case RESERVE: what = "RESERVE"; break;
case RELEASE: what = "RELEASE"; break;
case COPY: what = "COPY"; break;
case ERASE: what = "ERASE"; break;
case MODE_SENSE: what = "MODE_SENSE"; break;
case START_STOP: what = "START_STOP"; break;
case RECEIVE_DIAGNOSTIC: what = "RECEIVE_DIAGNOSTIC"; break;
case SEND_DIAGNOSTIC: what = "SEND_DIAGNOSTIC"; break;
case ALLOW_MEDIUM_REMOVAL: what = "ALLOW_MEDIUM_REMOVAL"; break;
case SET_WINDOW: what = "SET_WINDOW"; break;
case READ_CAPACITY: what = "READ_CAPACITY"; break;
case READ_10: what = "READ_10"; break;
case WRITE_10: what = "WRITE_10"; break;
case SEEK_10: what = "SEEK_10"; break;
case WRITE_VERIFY: what = "WRITE_VERIFY"; break;
case VERIFY: what = "VERIFY"; break;
case SEARCH_HIGH: what = "SEARCH_HIGH"; break;
case SEARCH_EQUAL: what = "SEARCH_EQUAL"; break;
case SEARCH_LOW: what = "SEARCH_LOW"; break;
case SET_LIMITS: what = "SET_LIMITS"; break;
case READ_POSITION: what = "READ_POSITION"; break;
case SYNCHRONIZE_CACHE: what = "SYNCHRONIZE_CACHE"; break;
case LOCK_UNLOCK_CACHE: what = "LOCK_UNLOCK_CACHE"; break;
case READ_DEFECT_DATA: what = "READ_DEFECT_DATA"; break;
case MEDIUM_SCAN: what = "MEDIUM_SCAN"; break;
case COMPARE: what = "COMPARE"; break;
case COPY_VERIFY: what = "COPY_VERIFY"; break;
case WRITE_BUFFER: what = "WRITE_BUFFER"; break;
case READ_BUFFER: what = "READ_BUFFER"; break;
case UPDATE_BLOCK: what = "UPDATE_BLOCK"; break;
case READ_LONG: what = "READ_LONG"; break;
case WRITE_LONG: what = "WRITE_LONG"; break;
case CHANGE_DEFINITION: what = "CHANGE_DEFINITION"; break;
case WRITE_SAME: what = "WRITE_SAME"; break;
case GPCMD_READ_SUBCHANNEL: what = "READ SUBCHANNEL"; break;
case READ_TOC: what = "READ_TOC"; break;
case GPCMD_READ_HEADER: what = "READ HEADER"; break;
case GPCMD_PLAY_AUDIO_10: what = "PLAY AUDIO (10)"; break;
case GPCMD_PLAY_AUDIO_MSF: what = "PLAY AUDIO MSF"; break;
case GPCMD_GET_EVENT_STATUS_NOTIFICATION:
what = "GET EVENT/STATUS NOTIFICATION"; break;
case GPCMD_PAUSE_RESUME: what = "PAUSE/RESUME"; break;
case LOG_SELECT: what = "LOG_SELECT"; break;
case LOG_SENSE: what = "LOG_SENSE"; break;
case GPCMD_STOP_PLAY_SCAN: what = "STOP PLAY/SCAN"; break;
case GPCMD_READ_DISC_INFO: what = "READ DISC INFORMATION"; break;
case GPCMD_READ_TRACK_RZONE_INFO:
what = "READ TRACK INFORMATION"; break;
case GPCMD_RESERVE_RZONE_TRACK: what = "RESERVE TRACK"; break;
case GPCMD_SEND_OPC: what = "SEND OPC"; break;
case MODE_SELECT_10: what = "MODE_SELECT_10"; break;
case GPCMD_REPAIR_RZONE_TRACK: what = "REPAIR TRACK"; break;
case 0x59: what = "READ MASTER CUE"; break;
case MODE_SENSE_10: what = "MODE_SENSE_10"; break;
case GPCMD_CLOSE_TRACK: what = "CLOSE TRACK/SESSION"; break;
case 0x5C: what = "READ BUFFER CAPACITY"; break;
case 0x5D: what = "SEND CUE SHEET"; break;
case GPCMD_BLANK: what = "BLANK"; break;
case REPORT_LUNS: what = "REPORT LUNS"; break;
case MOVE_MEDIUM: what = "MOVE_MEDIUM or PLAY AUDIO (12)"; break;
case READ_12: what = "READ_12"; break;
case WRITE_12: what = "WRITE_12"; break;
case WRITE_VERIFY_12: what = "WRITE_VERIFY_12"; break;
case SEARCH_HIGH_12: what = "SEARCH_HIGH_12"; break;
case SEARCH_EQUAL_12: what = "SEARCH_EQUAL_12"; break;
case SEARCH_LOW_12: what = "SEARCH_LOW_12"; break;
case SEND_VOLUME_TAG: what = "SEND_VOLUME_TAG"; break;
case READ_ELEMENT_STATUS: what = "READ_ELEMENT_STATUS"; break;
case GPCMD_READ_CD_MSF: what = "READ CD MSF"; break;
case GPCMD_SCAN: what = "SCAN"; break;
case GPCMD_SET_SPEED: what = "SET CD SPEED"; break;
case GPCMD_MECHANISM_STATUS: what = "MECHANISM STATUS"; break;
case GPCMD_READ_CD: what = "READ CD"; break;
case 0xE1: what = "WRITE CONTINUE"; break;
case WRITE_LONG_2: what = "WRITE_LONG_2"; break;
default: what = "(unknown command)"; break;
}
US_DEBUGP("Command %s (%d bytes)\n", what, srb->cmd_len);
US_DEBUGP("");
for (i = 0; i < srb->cmd_len && i < 16; i++)
US_DEBUGPX(" %02x", srb->cmnd[i]);
US_DEBUGPX("\n");
}
void usb_stor_show_sense(
unsigned char key,
unsigned char asc,
unsigned char ascq) {
const char *what, *keystr;
keystr = scsi_sense_key_string(key);
what = scsi_extd_sense_format(asc, ascq);
if (keystr == NULL)
keystr = "(Unknown Key)";
if (what == NULL)
what = "(unknown ASC/ASCQ)";
US_DEBUGP("%s: ", keystr);
US_DEBUGPX(what, ascq);
US_DEBUGPX("\n");
}