linux-sg2042/include/asm-powerpc/paca.h

121 lines
3.9 KiB
C

/*
* include/asm-powerpc/paca.h
*
* This control block defines the PACA which defines the processor
* specific data for each logical processor on the system.
* There are some pointers defined that are utilized by PLIC.
*
* C 2001 PPC 64 Team, IBM Corp
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*/
#ifndef _ASM_POWERPC_PACA_H
#define _ASM_POWERPC_PACA_H
#include <linux/config.h>
#include <asm/types.h>
#include <asm/lppaca.h>
#include <asm/iseries/it_lp_reg_save.h>
#include <asm/mmu.h>
register struct paca_struct *local_paca asm("r13");
#define get_paca() local_paca
struct task_struct;
/*
* Defines the layout of the paca.
*
* This structure is not directly accessed by firmware or the service
* processor except for the first two pointers that point to the
* lppaca area and the ItLpRegSave area for this CPU. Both the
* lppaca and ItLpRegSave objects are currently contained within the
* PACA but they do not need to be.
*/
struct paca_struct {
/*
* Because hw_cpu_id, unlike other paca fields, is accessed
* routinely from other CPUs (from the IRQ code), we stick to
* read-only (after boot) fields in the first cacheline to
* avoid cacheline bouncing.
*/
/*
* MAGIC: These first two pointers can't be moved - they're
* accessed by the firmware
*/
struct lppaca *lppaca_ptr; /* Pointer to LpPaca for PLIC */
struct ItLpRegSave *reg_save_ptr; /* Pointer to LpRegSave for PLIC */
/*
* MAGIC: the spinlock functions in arch/ppc64/lib/locks.c
* load lock_token and paca_index with a single lwz
* instruction. They must travel together and be properly
* aligned.
*/
u16 lock_token; /* Constant 0x8000, used in locks */
u16 paca_index; /* Logical processor number */
u32 default_decr; /* Default decrementer value */
u64 kernel_toc; /* Kernel TOC address */
u64 stab_real; /* Absolute address of segment table */
u64 stab_addr; /* Virtual address of segment table */
void *emergency_sp; /* pointer to emergency stack */
s16 hw_cpu_id; /* Physical processor number */
u8 cpu_start; /* At startup, processor spins until */
/* this becomes non-zero. */
/*
* Now, starting in cacheline 2, the exception save areas
*/
/* used for most interrupts/exceptions */
u64 exgen[10] __attribute__((aligned(0x80)));
u64 exmc[10]; /* used for machine checks */
u64 exslb[10]; /* used for SLB/segment table misses
* on the linear mapping */
#ifdef CONFIG_PPC_64K_PAGES
pgd_t *pgdir;
#endif /* CONFIG_PPC_64K_PAGES */
mm_context_t context;
u16 slb_cache[SLB_CACHE_ENTRIES];
u16 slb_cache_ptr;
/*
* then miscellaneous read-write fields
*/
struct task_struct *__current; /* Pointer to current */
u64 kstack; /* Saved Kernel stack addr */
u64 stab_rr; /* stab/slb round-robin counter */
u64 next_jiffy_update_tb; /* TB value for next jiffy update */
u64 saved_r1; /* r1 save for RTAS calls */
u64 saved_msr; /* MSR saved here by enter_rtas */
u8 proc_enabled; /* irq soft-enable flag */
/* not yet used */
u64 exdsi[8]; /* used for linear mapping hash table misses */
/*
* iSeries structure which the hypervisor knows about -
* this structure should not cross a page boundary.
* The vpa_init/register_vpa call is now known to fail if the
* lppaca structure crosses a page boundary.
* The lppaca is also used on POWER5 pSeries boxes.
* The lppaca is 640 bytes long, and cannot readily change
* since the hypervisor knows its layout, so a 1kB
* alignment will suffice to ensure that it doesn't
* cross a page boundary.
*/
struct lppaca lppaca __attribute__((__aligned__(0x400)));
#ifdef CONFIG_PPC_ISERIES
struct ItLpRegSave reg_save;
#endif
};
extern struct paca_struct paca[];
#endif /* _ASM_POWERPC_PACA_H */