1902 lines
49 KiB
C
1902 lines
49 KiB
C
/*
|
|
* drivers/input/tablet/wacom_sys.c
|
|
*
|
|
* USB Wacom tablet support - system specific code
|
|
*/
|
|
|
|
/*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License as published by
|
|
* the Free Software Foundation; either version 2 of the License, or
|
|
* (at your option) any later version.
|
|
*/
|
|
|
|
#include "wacom_wac.h"
|
|
#include "wacom.h"
|
|
#include <linux/input/mt.h>
|
|
|
|
#define WAC_MSG_RETRIES 5
|
|
|
|
#define WAC_CMD_WL_LED_CONTROL 0x03
|
|
#define WAC_CMD_LED_CONTROL 0x20
|
|
#define WAC_CMD_ICON_START 0x21
|
|
#define WAC_CMD_ICON_XFER 0x23
|
|
#define WAC_CMD_ICON_BT_XFER 0x26
|
|
#define WAC_CMD_RETRIES 10
|
|
#define WAC_CMD_DELETE_PAIRING 0x20
|
|
#define WAC_CMD_UNPAIR_ALL 0xFF
|
|
#define WAC_REMOTE_SERIAL_MAX_STRLEN 9
|
|
|
|
#define DEV_ATTR_RW_PERM (S_IRUGO | S_IWUSR | S_IWGRP)
|
|
#define DEV_ATTR_WO_PERM (S_IWUSR | S_IWGRP)
|
|
#define DEV_ATTR_RO_PERM (S_IRUSR | S_IRGRP)
|
|
|
|
static int wacom_get_report(struct hid_device *hdev, u8 type, u8 *buf,
|
|
size_t size, unsigned int retries)
|
|
{
|
|
int retval;
|
|
|
|
do {
|
|
retval = hid_hw_raw_request(hdev, buf[0], buf, size, type,
|
|
HID_REQ_GET_REPORT);
|
|
} while ((retval == -ETIMEDOUT || retval == -EAGAIN) && --retries);
|
|
|
|
if (retval < 0)
|
|
hid_err(hdev, "wacom_get_report: ran out of retries "
|
|
"(last error = %d)\n", retval);
|
|
|
|
return retval;
|
|
}
|
|
|
|
static int wacom_set_report(struct hid_device *hdev, u8 type, u8 *buf,
|
|
size_t size, unsigned int retries)
|
|
{
|
|
int retval;
|
|
|
|
do {
|
|
retval = hid_hw_raw_request(hdev, buf[0], buf, size, type,
|
|
HID_REQ_SET_REPORT);
|
|
} while ((retval == -ETIMEDOUT || retval == -EAGAIN) && --retries);
|
|
|
|
if (retval < 0)
|
|
hid_err(hdev, "wacom_set_report: ran out of retries "
|
|
"(last error = %d)\n", retval);
|
|
|
|
return retval;
|
|
}
|
|
|
|
static int wacom_raw_event(struct hid_device *hdev, struct hid_report *report,
|
|
u8 *raw_data, int size)
|
|
{
|
|
struct wacom *wacom = hid_get_drvdata(hdev);
|
|
|
|
if (size > WACOM_PKGLEN_MAX)
|
|
return 1;
|
|
|
|
memcpy(wacom->wacom_wac.data, raw_data, size);
|
|
|
|
wacom_wac_irq(&wacom->wacom_wac, size);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wacom_open(struct input_dev *dev)
|
|
{
|
|
struct wacom *wacom = input_get_drvdata(dev);
|
|
|
|
return hid_hw_open(wacom->hdev);
|
|
}
|
|
|
|
static void wacom_close(struct input_dev *dev)
|
|
{
|
|
struct wacom *wacom = input_get_drvdata(dev);
|
|
|
|
hid_hw_close(wacom->hdev);
|
|
}
|
|
|
|
/*
|
|
* Calculate the resolution of the X or Y axis using hidinput_calc_abs_res.
|
|
*/
|
|
static int wacom_calc_hid_res(int logical_extents, int physical_extents,
|
|
unsigned unit, int exponent)
|
|
{
|
|
struct hid_field field = {
|
|
.logical_maximum = logical_extents,
|
|
.physical_maximum = physical_extents,
|
|
.unit = unit,
|
|
.unit_exponent = exponent,
|
|
};
|
|
|
|
return hidinput_calc_abs_res(&field, ABS_X);
|
|
}
|
|
|
|
static void wacom_feature_mapping(struct hid_device *hdev,
|
|
struct hid_field *field, struct hid_usage *usage)
|
|
{
|
|
struct wacom *wacom = hid_get_drvdata(hdev);
|
|
struct wacom_features *features = &wacom->wacom_wac.features;
|
|
struct hid_data *hid_data = &wacom->wacom_wac.hid_data;
|
|
u8 *data;
|
|
int ret;
|
|
|
|
switch (usage->hid) {
|
|
case HID_DG_CONTACTMAX:
|
|
/* leave touch_max as is if predefined */
|
|
if (!features->touch_max) {
|
|
/* read manually */
|
|
data = kzalloc(2, GFP_KERNEL);
|
|
if (!data)
|
|
break;
|
|
data[0] = field->report->id;
|
|
ret = wacom_get_report(hdev, HID_FEATURE_REPORT,
|
|
data, 2, WAC_CMD_RETRIES);
|
|
if (ret == 2) {
|
|
features->touch_max = data[1];
|
|
} else {
|
|
features->touch_max = 16;
|
|
hid_warn(hdev, "wacom_feature_mapping: "
|
|
"could not get HID_DG_CONTACTMAX, "
|
|
"defaulting to %d\n",
|
|
features->touch_max);
|
|
}
|
|
kfree(data);
|
|
}
|
|
break;
|
|
case HID_DG_INPUTMODE:
|
|
/* Ignore if value index is out of bounds. */
|
|
if (usage->usage_index >= field->report_count) {
|
|
dev_err(&hdev->dev, "HID_DG_INPUTMODE out of range\n");
|
|
break;
|
|
}
|
|
|
|
hid_data->inputmode = field->report->id;
|
|
hid_data->inputmode_index = usage->usage_index;
|
|
break;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Interface Descriptor of wacom devices can be incomplete and
|
|
* inconsistent so wacom_features table is used to store stylus
|
|
* device's packet lengths, various maximum values, and tablet
|
|
* resolution based on product ID's.
|
|
*
|
|
* For devices that contain 2 interfaces, wacom_features table is
|
|
* inaccurate for the touch interface. Since the Interface Descriptor
|
|
* for touch interfaces has pretty complete data, this function exists
|
|
* to query tablet for this missing information instead of hard coding in
|
|
* an additional table.
|
|
*
|
|
* A typical Interface Descriptor for a stylus will contain a
|
|
* boot mouse application collection that is not of interest and this
|
|
* function will ignore it.
|
|
*
|
|
* It also contains a digitizer application collection that also is not
|
|
* of interest since any information it contains would be duplicate
|
|
* of what is in wacom_features. Usually it defines a report of an array
|
|
* of bytes that could be used as max length of the stylus packet returned.
|
|
* If it happens to define a Digitizer-Stylus Physical Collection then
|
|
* the X and Y logical values contain valid data but it is ignored.
|
|
*
|
|
* A typical Interface Descriptor for a touch interface will contain a
|
|
* Digitizer-Finger Physical Collection which will define both logical
|
|
* X/Y maximum as well as the physical size of tablet. Since touch
|
|
* interfaces haven't supported pressure or distance, this is enough
|
|
* information to override invalid values in the wacom_features table.
|
|
*
|
|
* Intuos5 touch interface and 3rd gen Bamboo Touch do not contain useful
|
|
* data. We deal with them after returning from this function.
|
|
*/
|
|
static void wacom_usage_mapping(struct hid_device *hdev,
|
|
struct hid_field *field, struct hid_usage *usage)
|
|
{
|
|
struct wacom *wacom = hid_get_drvdata(hdev);
|
|
struct wacom_features *features = &wacom->wacom_wac.features;
|
|
bool finger = WACOM_FINGER_FIELD(field);
|
|
bool pen = WACOM_PEN_FIELD(field);
|
|
|
|
/*
|
|
* Requiring Stylus Usage will ignore boot mouse
|
|
* X/Y values and some cases of invalid Digitizer X/Y
|
|
* values commonly reported.
|
|
*/
|
|
if (pen)
|
|
features->device_type |= WACOM_DEVICETYPE_PEN;
|
|
else if (finger)
|
|
features->device_type |= WACOM_DEVICETYPE_TOUCH;
|
|
else
|
|
return;
|
|
|
|
/*
|
|
* Bamboo models do not support HID_DG_CONTACTMAX.
|
|
* And, Bamboo Pen only descriptor contains touch.
|
|
*/
|
|
if (features->type != BAMBOO_PT) {
|
|
/* ISDv4 touch devices at least supports one touch point */
|
|
if (finger && !features->touch_max)
|
|
features->touch_max = 1;
|
|
}
|
|
|
|
switch (usage->hid) {
|
|
case HID_GD_X:
|
|
features->x_max = field->logical_maximum;
|
|
if (finger) {
|
|
features->x_phy = field->physical_maximum;
|
|
if (features->type != BAMBOO_PT) {
|
|
features->unit = field->unit;
|
|
features->unitExpo = field->unit_exponent;
|
|
}
|
|
}
|
|
break;
|
|
case HID_GD_Y:
|
|
features->y_max = field->logical_maximum;
|
|
if (finger) {
|
|
features->y_phy = field->physical_maximum;
|
|
if (features->type != BAMBOO_PT) {
|
|
features->unit = field->unit;
|
|
features->unitExpo = field->unit_exponent;
|
|
}
|
|
}
|
|
break;
|
|
case HID_DG_TIPPRESSURE:
|
|
if (pen)
|
|
features->pressure_max = field->logical_maximum;
|
|
break;
|
|
}
|
|
|
|
if (features->type == HID_GENERIC)
|
|
wacom_wac_usage_mapping(hdev, field, usage);
|
|
}
|
|
|
|
static void wacom_post_parse_hid(struct hid_device *hdev,
|
|
struct wacom_features *features)
|
|
{
|
|
struct wacom *wacom = hid_get_drvdata(hdev);
|
|
struct wacom_wac *wacom_wac = &wacom->wacom_wac;
|
|
|
|
if (features->type == HID_GENERIC) {
|
|
/* Any last-minute generic device setup */
|
|
if (features->touch_max > 1) {
|
|
input_mt_init_slots(wacom_wac->touch_input, wacom_wac->features.touch_max,
|
|
INPUT_MT_DIRECT);
|
|
}
|
|
}
|
|
}
|
|
|
|
static void wacom_parse_hid(struct hid_device *hdev,
|
|
struct wacom_features *features)
|
|
{
|
|
struct hid_report_enum *rep_enum;
|
|
struct hid_report *hreport;
|
|
int i, j;
|
|
|
|
/* check features first */
|
|
rep_enum = &hdev->report_enum[HID_FEATURE_REPORT];
|
|
list_for_each_entry(hreport, &rep_enum->report_list, list) {
|
|
for (i = 0; i < hreport->maxfield; i++) {
|
|
/* Ignore if report count is out of bounds. */
|
|
if (hreport->field[i]->report_count < 1)
|
|
continue;
|
|
|
|
for (j = 0; j < hreport->field[i]->maxusage; j++) {
|
|
wacom_feature_mapping(hdev, hreport->field[i],
|
|
hreport->field[i]->usage + j);
|
|
}
|
|
}
|
|
}
|
|
|
|
/* now check the input usages */
|
|
rep_enum = &hdev->report_enum[HID_INPUT_REPORT];
|
|
list_for_each_entry(hreport, &rep_enum->report_list, list) {
|
|
|
|
if (!hreport->maxfield)
|
|
continue;
|
|
|
|
for (i = 0; i < hreport->maxfield; i++)
|
|
for (j = 0; j < hreport->field[i]->maxusage; j++)
|
|
wacom_usage_mapping(hdev, hreport->field[i],
|
|
hreport->field[i]->usage + j);
|
|
}
|
|
|
|
wacom_post_parse_hid(hdev, features);
|
|
}
|
|
|
|
static int wacom_hid_set_device_mode(struct hid_device *hdev)
|
|
{
|
|
struct wacom *wacom = hid_get_drvdata(hdev);
|
|
struct hid_data *hid_data = &wacom->wacom_wac.hid_data;
|
|
struct hid_report *r;
|
|
struct hid_report_enum *re;
|
|
|
|
if (hid_data->inputmode < 0)
|
|
return 0;
|
|
|
|
re = &(hdev->report_enum[HID_FEATURE_REPORT]);
|
|
r = re->report_id_hash[hid_data->inputmode];
|
|
if (r) {
|
|
r->field[0]->value[hid_data->inputmode_index] = 2;
|
|
hid_hw_request(hdev, r, HID_REQ_SET_REPORT);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
static int wacom_set_device_mode(struct hid_device *hdev, int report_id,
|
|
int length, int mode)
|
|
{
|
|
unsigned char *rep_data;
|
|
int error = -ENOMEM, limit = 0;
|
|
|
|
rep_data = kzalloc(length, GFP_KERNEL);
|
|
if (!rep_data)
|
|
return error;
|
|
|
|
do {
|
|
rep_data[0] = report_id;
|
|
rep_data[1] = mode;
|
|
|
|
error = wacom_set_report(hdev, HID_FEATURE_REPORT, rep_data,
|
|
length, 1);
|
|
if (error >= 0)
|
|
error = wacom_get_report(hdev, HID_FEATURE_REPORT,
|
|
rep_data, length, 1);
|
|
} while (error >= 0 && rep_data[1] != mode && limit++ < WAC_MSG_RETRIES);
|
|
|
|
kfree(rep_data);
|
|
|
|
return error < 0 ? error : 0;
|
|
}
|
|
|
|
static int wacom_bt_query_tablet_data(struct hid_device *hdev, u8 speed,
|
|
struct wacom_features *features)
|
|
{
|
|
struct wacom *wacom = hid_get_drvdata(hdev);
|
|
int ret;
|
|
u8 rep_data[2];
|
|
|
|
switch (features->type) {
|
|
case GRAPHIRE_BT:
|
|
rep_data[0] = 0x03;
|
|
rep_data[1] = 0x00;
|
|
ret = wacom_set_report(hdev, HID_FEATURE_REPORT, rep_data, 2,
|
|
3);
|
|
|
|
if (ret >= 0) {
|
|
rep_data[0] = speed == 0 ? 0x05 : 0x06;
|
|
rep_data[1] = 0x00;
|
|
|
|
ret = wacom_set_report(hdev, HID_FEATURE_REPORT,
|
|
rep_data, 2, 3);
|
|
|
|
if (ret >= 0) {
|
|
wacom->wacom_wac.bt_high_speed = speed;
|
|
return 0;
|
|
}
|
|
}
|
|
|
|
/*
|
|
* Note that if the raw queries fail, it's not a hard failure
|
|
* and it is safe to continue
|
|
*/
|
|
hid_warn(hdev, "failed to poke device, command %d, err %d\n",
|
|
rep_data[0], ret);
|
|
break;
|
|
case INTUOS4WL:
|
|
if (speed == 1)
|
|
wacom->wacom_wac.bt_features &= ~0x20;
|
|
else
|
|
wacom->wacom_wac.bt_features |= 0x20;
|
|
|
|
rep_data[0] = 0x03;
|
|
rep_data[1] = wacom->wacom_wac.bt_features;
|
|
|
|
ret = wacom_set_report(hdev, HID_FEATURE_REPORT, rep_data, 2,
|
|
1);
|
|
if (ret >= 0)
|
|
wacom->wacom_wac.bt_high_speed = speed;
|
|
break;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Switch the tablet into its most-capable mode. Wacom tablets are
|
|
* typically configured to power-up in a mode which sends mouse-like
|
|
* reports to the OS. To get absolute position, pressure data, etc.
|
|
* from the tablet, it is necessary to switch the tablet out of this
|
|
* mode and into one which sends the full range of tablet data.
|
|
*/
|
|
static int wacom_query_tablet_data(struct hid_device *hdev,
|
|
struct wacom_features *features)
|
|
{
|
|
if (hdev->bus == BUS_BLUETOOTH)
|
|
return wacom_bt_query_tablet_data(hdev, 1, features);
|
|
|
|
if (features->type == HID_GENERIC)
|
|
return wacom_hid_set_device_mode(hdev);
|
|
|
|
if (features->device_type & WACOM_DEVICETYPE_TOUCH) {
|
|
if (features->type > TABLETPC) {
|
|
/* MT Tablet PC touch */
|
|
return wacom_set_device_mode(hdev, 3, 4, 4);
|
|
}
|
|
else if (features->type == WACOM_24HDT || features->type == CINTIQ_HYBRID) {
|
|
return wacom_set_device_mode(hdev, 18, 3, 2);
|
|
}
|
|
else if (features->type == WACOM_27QHDT) {
|
|
return wacom_set_device_mode(hdev, 131, 3, 2);
|
|
}
|
|
else if (features->type == BAMBOO_PAD) {
|
|
return wacom_set_device_mode(hdev, 2, 2, 2);
|
|
}
|
|
} else if (features->device_type & WACOM_DEVICETYPE_PEN) {
|
|
if (features->type <= BAMBOO_PT && features->type != WIRELESS) {
|
|
return wacom_set_device_mode(hdev, 2, 2, 2);
|
|
}
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void wacom_retrieve_hid_descriptor(struct hid_device *hdev,
|
|
struct wacom_features *features)
|
|
{
|
|
struct wacom *wacom = hid_get_drvdata(hdev);
|
|
struct usb_interface *intf = wacom->intf;
|
|
|
|
/* default features */
|
|
features->x_fuzz = 4;
|
|
features->y_fuzz = 4;
|
|
features->pressure_fuzz = 0;
|
|
features->distance_fuzz = 0;
|
|
|
|
/*
|
|
* The wireless device HID is basic and layout conflicts with
|
|
* other tablets (monitor and touch interface can look like pen).
|
|
* Skip the query for this type and modify defaults based on
|
|
* interface number.
|
|
*/
|
|
if (features->type == WIRELESS) {
|
|
if (intf->cur_altsetting->desc.bInterfaceNumber == 0)
|
|
features->device_type = WACOM_DEVICETYPE_WL_MONITOR;
|
|
else
|
|
features->device_type = WACOM_DEVICETYPE_NONE;
|
|
return;
|
|
}
|
|
|
|
wacom_parse_hid(hdev, features);
|
|
}
|
|
|
|
struct wacom_hdev_data {
|
|
struct list_head list;
|
|
struct kref kref;
|
|
struct hid_device *dev;
|
|
struct wacom_shared shared;
|
|
};
|
|
|
|
static LIST_HEAD(wacom_udev_list);
|
|
static DEFINE_MUTEX(wacom_udev_list_lock);
|
|
|
|
static bool wacom_are_sibling(struct hid_device *hdev,
|
|
struct hid_device *sibling)
|
|
{
|
|
struct wacom *wacom = hid_get_drvdata(hdev);
|
|
struct wacom_features *features = &wacom->wacom_wac.features;
|
|
int vid = features->oVid;
|
|
int pid = features->oPid;
|
|
int n1,n2;
|
|
|
|
if (vid == 0 && pid == 0) {
|
|
vid = hdev->vendor;
|
|
pid = hdev->product;
|
|
}
|
|
|
|
if (vid != sibling->vendor || pid != sibling->product)
|
|
return false;
|
|
|
|
/* Compare the physical path. */
|
|
n1 = strrchr(hdev->phys, '.') - hdev->phys;
|
|
n2 = strrchr(sibling->phys, '.') - sibling->phys;
|
|
if (n1 != n2 || n1 <= 0 || n2 <= 0)
|
|
return false;
|
|
|
|
return !strncmp(hdev->phys, sibling->phys, n1);
|
|
}
|
|
|
|
static struct wacom_hdev_data *wacom_get_hdev_data(struct hid_device *hdev)
|
|
{
|
|
struct wacom_hdev_data *data;
|
|
|
|
list_for_each_entry(data, &wacom_udev_list, list) {
|
|
if (wacom_are_sibling(hdev, data->dev)) {
|
|
kref_get(&data->kref);
|
|
return data;
|
|
}
|
|
}
|
|
|
|
return NULL;
|
|
}
|
|
|
|
static int wacom_add_shared_data(struct hid_device *hdev)
|
|
{
|
|
struct wacom *wacom = hid_get_drvdata(hdev);
|
|
struct wacom_wac *wacom_wac = &wacom->wacom_wac;
|
|
struct wacom_hdev_data *data;
|
|
int retval = 0;
|
|
|
|
mutex_lock(&wacom_udev_list_lock);
|
|
|
|
data = wacom_get_hdev_data(hdev);
|
|
if (!data) {
|
|
data = kzalloc(sizeof(struct wacom_hdev_data), GFP_KERNEL);
|
|
if (!data) {
|
|
retval = -ENOMEM;
|
|
goto out;
|
|
}
|
|
|
|
kref_init(&data->kref);
|
|
data->dev = hdev;
|
|
list_add_tail(&data->list, &wacom_udev_list);
|
|
}
|
|
|
|
wacom_wac->shared = &data->shared;
|
|
|
|
if (wacom_wac->features.device_type & WACOM_DEVICETYPE_TOUCH)
|
|
wacom_wac->shared->touch = hdev;
|
|
else if (wacom_wac->features.device_type & WACOM_DEVICETYPE_PEN)
|
|
wacom_wac->shared->pen = hdev;
|
|
|
|
out:
|
|
mutex_unlock(&wacom_udev_list_lock);
|
|
return retval;
|
|
}
|
|
|
|
static void wacom_release_shared_data(struct kref *kref)
|
|
{
|
|
struct wacom_hdev_data *data =
|
|
container_of(kref, struct wacom_hdev_data, kref);
|
|
|
|
mutex_lock(&wacom_udev_list_lock);
|
|
list_del(&data->list);
|
|
mutex_unlock(&wacom_udev_list_lock);
|
|
|
|
kfree(data);
|
|
}
|
|
|
|
static void wacom_remove_shared_data(struct wacom *wacom)
|
|
{
|
|
struct wacom_hdev_data *data;
|
|
struct wacom_wac *wacom_wac = &wacom->wacom_wac;
|
|
|
|
if (wacom_wac->shared) {
|
|
data = container_of(wacom_wac->shared, struct wacom_hdev_data,
|
|
shared);
|
|
|
|
if (wacom_wac->shared->touch == wacom->hdev)
|
|
wacom_wac->shared->touch = NULL;
|
|
else if (wacom_wac->shared->pen == wacom->hdev)
|
|
wacom_wac->shared->pen = NULL;
|
|
|
|
kref_put(&data->kref, wacom_release_shared_data);
|
|
wacom_wac->shared = NULL;
|
|
}
|
|
}
|
|
|
|
static int wacom_led_control(struct wacom *wacom)
|
|
{
|
|
unsigned char *buf;
|
|
int retval;
|
|
unsigned char report_id = WAC_CMD_LED_CONTROL;
|
|
int buf_size = 9;
|
|
|
|
if (wacom->wacom_wac.pid) { /* wireless connected */
|
|
report_id = WAC_CMD_WL_LED_CONTROL;
|
|
buf_size = 13;
|
|
}
|
|
buf = kzalloc(buf_size, GFP_KERNEL);
|
|
if (!buf)
|
|
return -ENOMEM;
|
|
|
|
if (wacom->wacom_wac.features.type >= INTUOS5S &&
|
|
wacom->wacom_wac.features.type <= INTUOSPL) {
|
|
/*
|
|
* Touch Ring and crop mark LED luminance may take on
|
|
* one of four values:
|
|
* 0 = Low; 1 = Medium; 2 = High; 3 = Off
|
|
*/
|
|
int ring_led = wacom->led.select[0] & 0x03;
|
|
int ring_lum = (((wacom->led.llv & 0x60) >> 5) - 1) & 0x03;
|
|
int crop_lum = 0;
|
|
unsigned char led_bits = (crop_lum << 4) | (ring_lum << 2) | (ring_led);
|
|
|
|
buf[0] = report_id;
|
|
if (wacom->wacom_wac.pid) {
|
|
wacom_get_report(wacom->hdev, HID_FEATURE_REPORT,
|
|
buf, buf_size, WAC_CMD_RETRIES);
|
|
buf[0] = report_id;
|
|
buf[4] = led_bits;
|
|
} else
|
|
buf[1] = led_bits;
|
|
}
|
|
else {
|
|
int led = wacom->led.select[0] | 0x4;
|
|
|
|
if (wacom->wacom_wac.features.type == WACOM_21UX2 ||
|
|
wacom->wacom_wac.features.type == WACOM_24HD)
|
|
led |= (wacom->led.select[1] << 4) | 0x40;
|
|
|
|
buf[0] = report_id;
|
|
buf[1] = led;
|
|
buf[2] = wacom->led.llv;
|
|
buf[3] = wacom->led.hlv;
|
|
buf[4] = wacom->led.img_lum;
|
|
}
|
|
|
|
retval = wacom_set_report(wacom->hdev, HID_FEATURE_REPORT, buf, buf_size,
|
|
WAC_CMD_RETRIES);
|
|
kfree(buf);
|
|
|
|
return retval;
|
|
}
|
|
|
|
static int wacom_led_putimage(struct wacom *wacom, int button_id, u8 xfer_id,
|
|
const unsigned len, const void *img)
|
|
{
|
|
unsigned char *buf;
|
|
int i, retval;
|
|
const unsigned chunk_len = len / 4; /* 4 chunks are needed to be sent */
|
|
|
|
buf = kzalloc(chunk_len + 3 , GFP_KERNEL);
|
|
if (!buf)
|
|
return -ENOMEM;
|
|
|
|
/* Send 'start' command */
|
|
buf[0] = WAC_CMD_ICON_START;
|
|
buf[1] = 1;
|
|
retval = wacom_set_report(wacom->hdev, HID_FEATURE_REPORT, buf, 2,
|
|
WAC_CMD_RETRIES);
|
|
if (retval < 0)
|
|
goto out;
|
|
|
|
buf[0] = xfer_id;
|
|
buf[1] = button_id & 0x07;
|
|
for (i = 0; i < 4; i++) {
|
|
buf[2] = i;
|
|
memcpy(buf + 3, img + i * chunk_len, chunk_len);
|
|
|
|
retval = wacom_set_report(wacom->hdev, HID_FEATURE_REPORT,
|
|
buf, chunk_len + 3, WAC_CMD_RETRIES);
|
|
if (retval < 0)
|
|
break;
|
|
}
|
|
|
|
/* Send 'stop' */
|
|
buf[0] = WAC_CMD_ICON_START;
|
|
buf[1] = 0;
|
|
wacom_set_report(wacom->hdev, HID_FEATURE_REPORT, buf, 2,
|
|
WAC_CMD_RETRIES);
|
|
|
|
out:
|
|
kfree(buf);
|
|
return retval;
|
|
}
|
|
|
|
static ssize_t wacom_led_select_store(struct device *dev, int set_id,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct hid_device *hdev = container_of(dev, struct hid_device, dev);
|
|
struct wacom *wacom = hid_get_drvdata(hdev);
|
|
unsigned int id;
|
|
int err;
|
|
|
|
err = kstrtouint(buf, 10, &id);
|
|
if (err)
|
|
return err;
|
|
|
|
mutex_lock(&wacom->lock);
|
|
|
|
wacom->led.select[set_id] = id & 0x3;
|
|
err = wacom_led_control(wacom);
|
|
|
|
mutex_unlock(&wacom->lock);
|
|
|
|
return err < 0 ? err : count;
|
|
}
|
|
|
|
#define DEVICE_LED_SELECT_ATTR(SET_ID) \
|
|
static ssize_t wacom_led##SET_ID##_select_store(struct device *dev, \
|
|
struct device_attribute *attr, const char *buf, size_t count) \
|
|
{ \
|
|
return wacom_led_select_store(dev, SET_ID, buf, count); \
|
|
} \
|
|
static ssize_t wacom_led##SET_ID##_select_show(struct device *dev, \
|
|
struct device_attribute *attr, char *buf) \
|
|
{ \
|
|
struct hid_device *hdev = container_of(dev, struct hid_device, dev);\
|
|
struct wacom *wacom = hid_get_drvdata(hdev); \
|
|
return scnprintf(buf, PAGE_SIZE, "%d\n", \
|
|
wacom->led.select[SET_ID]); \
|
|
} \
|
|
static DEVICE_ATTR(status_led##SET_ID##_select, DEV_ATTR_RW_PERM, \
|
|
wacom_led##SET_ID##_select_show, \
|
|
wacom_led##SET_ID##_select_store)
|
|
|
|
DEVICE_LED_SELECT_ATTR(0);
|
|
DEVICE_LED_SELECT_ATTR(1);
|
|
|
|
static ssize_t wacom_luminance_store(struct wacom *wacom, u8 *dest,
|
|
const char *buf, size_t count)
|
|
{
|
|
unsigned int value;
|
|
int err;
|
|
|
|
err = kstrtouint(buf, 10, &value);
|
|
if (err)
|
|
return err;
|
|
|
|
mutex_lock(&wacom->lock);
|
|
|
|
*dest = value & 0x7f;
|
|
err = wacom_led_control(wacom);
|
|
|
|
mutex_unlock(&wacom->lock);
|
|
|
|
return err < 0 ? err : count;
|
|
}
|
|
|
|
#define DEVICE_LUMINANCE_ATTR(name, field) \
|
|
static ssize_t wacom_##name##_luminance_store(struct device *dev, \
|
|
struct device_attribute *attr, const char *buf, size_t count) \
|
|
{ \
|
|
struct hid_device *hdev = container_of(dev, struct hid_device, dev);\
|
|
struct wacom *wacom = hid_get_drvdata(hdev); \
|
|
\
|
|
return wacom_luminance_store(wacom, &wacom->led.field, \
|
|
buf, count); \
|
|
} \
|
|
static ssize_t wacom_##name##_luminance_show(struct device *dev, \
|
|
struct device_attribute *attr, char *buf) \
|
|
{ \
|
|
struct wacom *wacom = dev_get_drvdata(dev); \
|
|
return scnprintf(buf, PAGE_SIZE, "%d\n", wacom->led.field); \
|
|
} \
|
|
static DEVICE_ATTR(name##_luminance, DEV_ATTR_RW_PERM, \
|
|
wacom_##name##_luminance_show, \
|
|
wacom_##name##_luminance_store)
|
|
|
|
DEVICE_LUMINANCE_ATTR(status0, llv);
|
|
DEVICE_LUMINANCE_ATTR(status1, hlv);
|
|
DEVICE_LUMINANCE_ATTR(buttons, img_lum);
|
|
|
|
static ssize_t wacom_button_image_store(struct device *dev, int button_id,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct hid_device *hdev = container_of(dev, struct hid_device, dev);
|
|
struct wacom *wacom = hid_get_drvdata(hdev);
|
|
int err;
|
|
unsigned len;
|
|
u8 xfer_id;
|
|
|
|
if (hdev->bus == BUS_BLUETOOTH) {
|
|
len = 256;
|
|
xfer_id = WAC_CMD_ICON_BT_XFER;
|
|
} else {
|
|
len = 1024;
|
|
xfer_id = WAC_CMD_ICON_XFER;
|
|
}
|
|
|
|
if (count != len)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&wacom->lock);
|
|
|
|
err = wacom_led_putimage(wacom, button_id, xfer_id, len, buf);
|
|
|
|
mutex_unlock(&wacom->lock);
|
|
|
|
return err < 0 ? err : count;
|
|
}
|
|
|
|
#define DEVICE_BTNIMG_ATTR(BUTTON_ID) \
|
|
static ssize_t wacom_btnimg##BUTTON_ID##_store(struct device *dev, \
|
|
struct device_attribute *attr, const char *buf, size_t count) \
|
|
{ \
|
|
return wacom_button_image_store(dev, BUTTON_ID, buf, count); \
|
|
} \
|
|
static DEVICE_ATTR(button##BUTTON_ID##_rawimg, DEV_ATTR_WO_PERM, \
|
|
NULL, wacom_btnimg##BUTTON_ID##_store)
|
|
|
|
DEVICE_BTNIMG_ATTR(0);
|
|
DEVICE_BTNIMG_ATTR(1);
|
|
DEVICE_BTNIMG_ATTR(2);
|
|
DEVICE_BTNIMG_ATTR(3);
|
|
DEVICE_BTNIMG_ATTR(4);
|
|
DEVICE_BTNIMG_ATTR(5);
|
|
DEVICE_BTNIMG_ATTR(6);
|
|
DEVICE_BTNIMG_ATTR(7);
|
|
|
|
static struct attribute *cintiq_led_attrs[] = {
|
|
&dev_attr_status_led0_select.attr,
|
|
&dev_attr_status_led1_select.attr,
|
|
NULL
|
|
};
|
|
|
|
static struct attribute_group cintiq_led_attr_group = {
|
|
.name = "wacom_led",
|
|
.attrs = cintiq_led_attrs,
|
|
};
|
|
|
|
static struct attribute *intuos4_led_attrs[] = {
|
|
&dev_attr_status0_luminance.attr,
|
|
&dev_attr_status1_luminance.attr,
|
|
&dev_attr_status_led0_select.attr,
|
|
&dev_attr_buttons_luminance.attr,
|
|
&dev_attr_button0_rawimg.attr,
|
|
&dev_attr_button1_rawimg.attr,
|
|
&dev_attr_button2_rawimg.attr,
|
|
&dev_attr_button3_rawimg.attr,
|
|
&dev_attr_button4_rawimg.attr,
|
|
&dev_attr_button5_rawimg.attr,
|
|
&dev_attr_button6_rawimg.attr,
|
|
&dev_attr_button7_rawimg.attr,
|
|
NULL
|
|
};
|
|
|
|
static struct attribute_group intuos4_led_attr_group = {
|
|
.name = "wacom_led",
|
|
.attrs = intuos4_led_attrs,
|
|
};
|
|
|
|
static struct attribute *intuos5_led_attrs[] = {
|
|
&dev_attr_status0_luminance.attr,
|
|
&dev_attr_status_led0_select.attr,
|
|
NULL
|
|
};
|
|
|
|
static struct attribute_group intuos5_led_attr_group = {
|
|
.name = "wacom_led",
|
|
.attrs = intuos5_led_attrs,
|
|
};
|
|
|
|
static int wacom_initialize_leds(struct wacom *wacom)
|
|
{
|
|
int error;
|
|
|
|
if (!(wacom->wacom_wac.features.device_type & WACOM_DEVICETYPE_PAD))
|
|
return 0;
|
|
|
|
/* Initialize default values */
|
|
switch (wacom->wacom_wac.features.type) {
|
|
case INTUOS4S:
|
|
case INTUOS4:
|
|
case INTUOS4WL:
|
|
case INTUOS4L:
|
|
wacom->led.select[0] = 0;
|
|
wacom->led.select[1] = 0;
|
|
wacom->led.llv = 10;
|
|
wacom->led.hlv = 20;
|
|
wacom->led.img_lum = 10;
|
|
error = sysfs_create_group(&wacom->hdev->dev.kobj,
|
|
&intuos4_led_attr_group);
|
|
break;
|
|
|
|
case WACOM_24HD:
|
|
case WACOM_21UX2:
|
|
wacom->led.select[0] = 0;
|
|
wacom->led.select[1] = 0;
|
|
wacom->led.llv = 0;
|
|
wacom->led.hlv = 0;
|
|
wacom->led.img_lum = 0;
|
|
|
|
error = sysfs_create_group(&wacom->hdev->dev.kobj,
|
|
&cintiq_led_attr_group);
|
|
break;
|
|
|
|
case INTUOS5S:
|
|
case INTUOS5:
|
|
case INTUOS5L:
|
|
case INTUOSPS:
|
|
case INTUOSPM:
|
|
case INTUOSPL:
|
|
wacom->led.select[0] = 0;
|
|
wacom->led.select[1] = 0;
|
|
wacom->led.llv = 32;
|
|
wacom->led.hlv = 0;
|
|
wacom->led.img_lum = 0;
|
|
|
|
error = sysfs_create_group(&wacom->hdev->dev.kobj,
|
|
&intuos5_led_attr_group);
|
|
break;
|
|
|
|
default:
|
|
return 0;
|
|
}
|
|
|
|
if (error) {
|
|
hid_err(wacom->hdev,
|
|
"cannot create sysfs group err: %d\n", error);
|
|
return error;
|
|
}
|
|
wacom_led_control(wacom);
|
|
wacom->led_initialized = true;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void wacom_destroy_leds(struct wacom *wacom)
|
|
{
|
|
if (!wacom->led_initialized)
|
|
return;
|
|
|
|
if (!(wacom->wacom_wac.features.device_type & WACOM_DEVICETYPE_PAD))
|
|
return;
|
|
|
|
wacom->led_initialized = false;
|
|
|
|
switch (wacom->wacom_wac.features.type) {
|
|
case INTUOS4S:
|
|
case INTUOS4:
|
|
case INTUOS4WL:
|
|
case INTUOS4L:
|
|
sysfs_remove_group(&wacom->hdev->dev.kobj,
|
|
&intuos4_led_attr_group);
|
|
break;
|
|
|
|
case WACOM_24HD:
|
|
case WACOM_21UX2:
|
|
sysfs_remove_group(&wacom->hdev->dev.kobj,
|
|
&cintiq_led_attr_group);
|
|
break;
|
|
|
|
case INTUOS5S:
|
|
case INTUOS5:
|
|
case INTUOS5L:
|
|
case INTUOSPS:
|
|
case INTUOSPM:
|
|
case INTUOSPL:
|
|
sysfs_remove_group(&wacom->hdev->dev.kobj,
|
|
&intuos5_led_attr_group);
|
|
break;
|
|
}
|
|
}
|
|
|
|
static enum power_supply_property wacom_battery_props[] = {
|
|
POWER_SUPPLY_PROP_PRESENT,
|
|
POWER_SUPPLY_PROP_STATUS,
|
|
POWER_SUPPLY_PROP_SCOPE,
|
|
POWER_SUPPLY_PROP_CAPACITY
|
|
};
|
|
|
|
static enum power_supply_property wacom_ac_props[] = {
|
|
POWER_SUPPLY_PROP_PRESENT,
|
|
POWER_SUPPLY_PROP_ONLINE,
|
|
POWER_SUPPLY_PROP_SCOPE,
|
|
};
|
|
|
|
static int wacom_battery_get_property(struct power_supply *psy,
|
|
enum power_supply_property psp,
|
|
union power_supply_propval *val)
|
|
{
|
|
struct wacom *wacom = power_supply_get_drvdata(psy);
|
|
int ret = 0;
|
|
|
|
switch (psp) {
|
|
case POWER_SUPPLY_PROP_PRESENT:
|
|
val->intval = wacom->wacom_wac.bat_connected;
|
|
break;
|
|
case POWER_SUPPLY_PROP_SCOPE:
|
|
val->intval = POWER_SUPPLY_SCOPE_DEVICE;
|
|
break;
|
|
case POWER_SUPPLY_PROP_CAPACITY:
|
|
val->intval =
|
|
wacom->wacom_wac.battery_capacity;
|
|
break;
|
|
case POWER_SUPPLY_PROP_STATUS:
|
|
if (wacom->wacom_wac.bat_charging)
|
|
val->intval = POWER_SUPPLY_STATUS_CHARGING;
|
|
else if (wacom->wacom_wac.battery_capacity == 100 &&
|
|
wacom->wacom_wac.ps_connected)
|
|
val->intval = POWER_SUPPLY_STATUS_FULL;
|
|
else if (wacom->wacom_wac.ps_connected)
|
|
val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
|
|
else
|
|
val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
|
|
return ret;
|
|
}
|
|
|
|
static int wacom_ac_get_property(struct power_supply *psy,
|
|
enum power_supply_property psp,
|
|
union power_supply_propval *val)
|
|
{
|
|
struct wacom *wacom = power_supply_get_drvdata(psy);
|
|
int ret = 0;
|
|
|
|
switch (psp) {
|
|
case POWER_SUPPLY_PROP_PRESENT:
|
|
/* fall through */
|
|
case POWER_SUPPLY_PROP_ONLINE:
|
|
val->intval = wacom->wacom_wac.ps_connected;
|
|
break;
|
|
case POWER_SUPPLY_PROP_SCOPE:
|
|
val->intval = POWER_SUPPLY_SCOPE_DEVICE;
|
|
break;
|
|
default:
|
|
ret = -EINVAL;
|
|
break;
|
|
}
|
|
return ret;
|
|
}
|
|
|
|
static int wacom_initialize_battery(struct wacom *wacom)
|
|
{
|
|
static atomic_t battery_no = ATOMIC_INIT(0);
|
|
struct power_supply_config psy_cfg = { .drv_data = wacom, };
|
|
unsigned long n;
|
|
|
|
if (wacom->wacom_wac.features.quirks & WACOM_QUIRK_BATTERY) {
|
|
struct power_supply_desc *bat_desc = &wacom->battery_desc;
|
|
struct power_supply_desc *ac_desc = &wacom->ac_desc;
|
|
n = atomic_inc_return(&battery_no) - 1;
|
|
|
|
bat_desc->properties = wacom_battery_props;
|
|
bat_desc->num_properties = ARRAY_SIZE(wacom_battery_props);
|
|
bat_desc->get_property = wacom_battery_get_property;
|
|
sprintf(wacom->wacom_wac.bat_name, "wacom_battery_%ld", n);
|
|
bat_desc->name = wacom->wacom_wac.bat_name;
|
|
bat_desc->type = POWER_SUPPLY_TYPE_BATTERY;
|
|
bat_desc->use_for_apm = 0;
|
|
|
|
ac_desc->properties = wacom_ac_props;
|
|
ac_desc->num_properties = ARRAY_SIZE(wacom_ac_props);
|
|
ac_desc->get_property = wacom_ac_get_property;
|
|
sprintf(wacom->wacom_wac.ac_name, "wacom_ac_%ld", n);
|
|
ac_desc->name = wacom->wacom_wac.ac_name;
|
|
ac_desc->type = POWER_SUPPLY_TYPE_MAINS;
|
|
ac_desc->use_for_apm = 0;
|
|
|
|
wacom->battery = power_supply_register(&wacom->hdev->dev,
|
|
&wacom->battery_desc, &psy_cfg);
|
|
if (IS_ERR(wacom->battery))
|
|
return PTR_ERR(wacom->battery);
|
|
|
|
power_supply_powers(wacom->battery, &wacom->hdev->dev);
|
|
|
|
wacom->ac = power_supply_register(&wacom->hdev->dev,
|
|
&wacom->ac_desc,
|
|
&psy_cfg);
|
|
if (IS_ERR(wacom->ac)) {
|
|
power_supply_unregister(wacom->battery);
|
|
return PTR_ERR(wacom->ac);
|
|
}
|
|
|
|
power_supply_powers(wacom->ac, &wacom->hdev->dev);
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void wacom_destroy_battery(struct wacom *wacom)
|
|
{
|
|
if (wacom->battery) {
|
|
power_supply_unregister(wacom->battery);
|
|
wacom->battery = NULL;
|
|
power_supply_unregister(wacom->ac);
|
|
wacom->ac = NULL;
|
|
}
|
|
}
|
|
|
|
static ssize_t wacom_show_speed(struct device *dev,
|
|
struct device_attribute
|
|
*attr, char *buf)
|
|
{
|
|
struct hid_device *hdev = container_of(dev, struct hid_device, dev);
|
|
struct wacom *wacom = hid_get_drvdata(hdev);
|
|
|
|
return snprintf(buf, PAGE_SIZE, "%i\n", wacom->wacom_wac.bt_high_speed);
|
|
}
|
|
|
|
static ssize_t wacom_store_speed(struct device *dev,
|
|
struct device_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
struct hid_device *hdev = container_of(dev, struct hid_device, dev);
|
|
struct wacom *wacom = hid_get_drvdata(hdev);
|
|
u8 new_speed;
|
|
|
|
if (kstrtou8(buf, 0, &new_speed))
|
|
return -EINVAL;
|
|
|
|
if (new_speed != 0 && new_speed != 1)
|
|
return -EINVAL;
|
|
|
|
wacom_bt_query_tablet_data(hdev, new_speed, &wacom->wacom_wac.features);
|
|
|
|
return count;
|
|
}
|
|
|
|
static DEVICE_ATTR(speed, DEV_ATTR_RW_PERM,
|
|
wacom_show_speed, wacom_store_speed);
|
|
|
|
|
|
static ssize_t wacom_show_remote_mode(struct kobject *kobj,
|
|
struct kobj_attribute *kattr,
|
|
char *buf, int index)
|
|
{
|
|
struct device *dev = container_of(kobj->parent, struct device, kobj);
|
|
struct hid_device *hdev = container_of(dev, struct hid_device, dev);
|
|
struct wacom *wacom = hid_get_drvdata(hdev);
|
|
u8 mode;
|
|
|
|
mode = wacom->led.select[index];
|
|
if (mode >= 0 && mode < 3)
|
|
return snprintf(buf, PAGE_SIZE, "%d\n", mode);
|
|
else
|
|
return snprintf(buf, PAGE_SIZE, "%d\n", -1);
|
|
}
|
|
|
|
#define DEVICE_EKR_ATTR_GROUP(SET_ID) \
|
|
static ssize_t wacom_show_remote##SET_ID##_mode(struct kobject *kobj, \
|
|
struct kobj_attribute *kattr, char *buf) \
|
|
{ \
|
|
return wacom_show_remote_mode(kobj, kattr, buf, SET_ID); \
|
|
} \
|
|
static struct kobj_attribute remote##SET_ID##_mode_attr = { \
|
|
.attr = {.name = "remote_mode", \
|
|
.mode = DEV_ATTR_RO_PERM}, \
|
|
.show = wacom_show_remote##SET_ID##_mode, \
|
|
}; \
|
|
static struct attribute *remote##SET_ID##_serial_attrs[] = { \
|
|
&remote##SET_ID##_mode_attr.attr, \
|
|
NULL \
|
|
}; \
|
|
static struct attribute_group remote##SET_ID##_serial_group = { \
|
|
.name = NULL, \
|
|
.attrs = remote##SET_ID##_serial_attrs, \
|
|
}
|
|
|
|
DEVICE_EKR_ATTR_GROUP(0);
|
|
DEVICE_EKR_ATTR_GROUP(1);
|
|
DEVICE_EKR_ATTR_GROUP(2);
|
|
DEVICE_EKR_ATTR_GROUP(3);
|
|
DEVICE_EKR_ATTR_GROUP(4);
|
|
|
|
int wacom_remote_create_attr_group(struct wacom *wacom, __u32 serial, int index)
|
|
{
|
|
int error = 0;
|
|
char *buf;
|
|
struct wacom_wac *wacom_wac = &wacom->wacom_wac;
|
|
|
|
wacom_wac->serial[index] = serial;
|
|
|
|
buf = kzalloc(WAC_REMOTE_SERIAL_MAX_STRLEN, GFP_KERNEL);
|
|
if (!buf)
|
|
return -ENOMEM;
|
|
snprintf(buf, WAC_REMOTE_SERIAL_MAX_STRLEN, "%d", serial);
|
|
wacom->remote_group[index].name = buf;
|
|
|
|
error = sysfs_create_group(wacom->remote_dir,
|
|
&wacom->remote_group[index]);
|
|
if (error) {
|
|
hid_err(wacom->hdev,
|
|
"cannot create sysfs group err: %d\n", error);
|
|
kobject_put(wacom->remote_dir);
|
|
return error;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
void wacom_remote_destroy_attr_group(struct wacom *wacom, __u32 serial)
|
|
{
|
|
struct wacom_wac *wacom_wac = &wacom->wacom_wac;
|
|
int i;
|
|
|
|
if (!serial)
|
|
return;
|
|
|
|
for (i = 0; i < WACOM_MAX_REMOTES; i++) {
|
|
if (wacom_wac->serial[i] == serial) {
|
|
wacom_wac->serial[i] = 0;
|
|
wacom->led.select[i] = WACOM_STATUS_UNKNOWN;
|
|
if (wacom->remote_group[i].name) {
|
|
sysfs_remove_group(wacom->remote_dir,
|
|
&wacom->remote_group[i]);
|
|
kfree(wacom->remote_group[i].name);
|
|
wacom->remote_group[i].name = NULL;
|
|
}
|
|
}
|
|
}
|
|
}
|
|
|
|
static int wacom_cmd_unpair_remote(struct wacom *wacom, unsigned char selector)
|
|
{
|
|
const size_t buf_size = 2;
|
|
unsigned char *buf;
|
|
int retval;
|
|
|
|
buf = kzalloc(buf_size, GFP_KERNEL);
|
|
if (!buf)
|
|
return -ENOMEM;
|
|
|
|
buf[0] = WAC_CMD_DELETE_PAIRING;
|
|
buf[1] = selector;
|
|
|
|
retval = wacom_set_report(wacom->hdev, HID_OUTPUT_REPORT, buf,
|
|
buf_size, WAC_CMD_RETRIES);
|
|
kfree(buf);
|
|
|
|
return retval;
|
|
}
|
|
|
|
static ssize_t wacom_store_unpair_remote(struct kobject *kobj,
|
|
struct kobj_attribute *attr,
|
|
const char *buf, size_t count)
|
|
{
|
|
unsigned char selector = 0;
|
|
struct device *dev = container_of(kobj->parent, struct device, kobj);
|
|
struct hid_device *hdev = container_of(dev, struct hid_device, dev);
|
|
struct wacom *wacom = hid_get_drvdata(hdev);
|
|
int err;
|
|
|
|
if (!strncmp(buf, "*\n", 2)) {
|
|
selector = WAC_CMD_UNPAIR_ALL;
|
|
} else {
|
|
hid_info(wacom->hdev, "remote: unrecognized unpair code: %s\n",
|
|
buf);
|
|
return -1;
|
|
}
|
|
|
|
mutex_lock(&wacom->lock);
|
|
|
|
err = wacom_cmd_unpair_remote(wacom, selector);
|
|
mutex_unlock(&wacom->lock);
|
|
|
|
return err < 0 ? err : count;
|
|
}
|
|
|
|
static struct kobj_attribute unpair_remote_attr = {
|
|
.attr = {.name = "unpair_remote", .mode = 0200},
|
|
.store = wacom_store_unpair_remote,
|
|
};
|
|
|
|
static const struct attribute *remote_unpair_attrs[] = {
|
|
&unpair_remote_attr.attr,
|
|
NULL
|
|
};
|
|
|
|
static int wacom_initialize_remote(struct wacom *wacom)
|
|
{
|
|
int error = 0;
|
|
struct wacom_wac *wacom_wac = &(wacom->wacom_wac);
|
|
int i;
|
|
|
|
if (wacom->wacom_wac.features.type != REMOTE)
|
|
return 0;
|
|
|
|
wacom->remote_group[0] = remote0_serial_group;
|
|
wacom->remote_group[1] = remote1_serial_group;
|
|
wacom->remote_group[2] = remote2_serial_group;
|
|
wacom->remote_group[3] = remote3_serial_group;
|
|
wacom->remote_group[4] = remote4_serial_group;
|
|
|
|
wacom->remote_dir = kobject_create_and_add("wacom_remote",
|
|
&wacom->hdev->dev.kobj);
|
|
if (!wacom->remote_dir)
|
|
return -ENOMEM;
|
|
|
|
error = sysfs_create_files(wacom->remote_dir, remote_unpair_attrs);
|
|
|
|
if (error) {
|
|
hid_err(wacom->hdev,
|
|
"cannot create sysfs group err: %d\n", error);
|
|
return error;
|
|
}
|
|
|
|
for (i = 0; i < WACOM_MAX_REMOTES; i++) {
|
|
wacom->led.select[i] = WACOM_STATUS_UNKNOWN;
|
|
wacom_wac->serial[i] = 0;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static struct input_dev *wacom_allocate_input(struct wacom *wacom)
|
|
{
|
|
struct input_dev *input_dev;
|
|
struct hid_device *hdev = wacom->hdev;
|
|
struct wacom_wac *wacom_wac = &(wacom->wacom_wac);
|
|
|
|
input_dev = input_allocate_device();
|
|
if (!input_dev)
|
|
return NULL;
|
|
|
|
input_dev->name = wacom_wac->features.name;
|
|
input_dev->phys = hdev->phys;
|
|
input_dev->dev.parent = &hdev->dev;
|
|
input_dev->open = wacom_open;
|
|
input_dev->close = wacom_close;
|
|
input_dev->uniq = hdev->uniq;
|
|
input_dev->id.bustype = hdev->bus;
|
|
input_dev->id.vendor = hdev->vendor;
|
|
input_dev->id.product = wacom_wac->pid ? wacom_wac->pid : hdev->product;
|
|
input_dev->id.version = hdev->version;
|
|
input_set_drvdata(input_dev, wacom);
|
|
|
|
return input_dev;
|
|
}
|
|
|
|
static void wacom_clean_inputs(struct wacom *wacom)
|
|
{
|
|
if (wacom->wacom_wac.pen_input) {
|
|
if (wacom->wacom_wac.pen_registered)
|
|
input_unregister_device(wacom->wacom_wac.pen_input);
|
|
else
|
|
input_free_device(wacom->wacom_wac.pen_input);
|
|
}
|
|
if (wacom->wacom_wac.touch_input) {
|
|
if (wacom->wacom_wac.touch_registered)
|
|
input_unregister_device(wacom->wacom_wac.touch_input);
|
|
else
|
|
input_free_device(wacom->wacom_wac.touch_input);
|
|
}
|
|
if (wacom->wacom_wac.pad_input) {
|
|
if (wacom->wacom_wac.pad_registered)
|
|
input_unregister_device(wacom->wacom_wac.pad_input);
|
|
else
|
|
input_free_device(wacom->wacom_wac.pad_input);
|
|
}
|
|
if (wacom->remote_dir)
|
|
kobject_put(wacom->remote_dir);
|
|
wacom->wacom_wac.pen_input = NULL;
|
|
wacom->wacom_wac.touch_input = NULL;
|
|
wacom->wacom_wac.pad_input = NULL;
|
|
wacom_destroy_leds(wacom);
|
|
}
|
|
|
|
static int wacom_allocate_inputs(struct wacom *wacom)
|
|
{
|
|
struct wacom_wac *wacom_wac = &(wacom->wacom_wac);
|
|
|
|
wacom_wac->pen_input = wacom_allocate_input(wacom);
|
|
wacom_wac->touch_input = wacom_allocate_input(wacom);
|
|
wacom_wac->pad_input = wacom_allocate_input(wacom);
|
|
if (!wacom_wac->pen_input || !wacom_wac->touch_input || !wacom_wac->pad_input) {
|
|
wacom_clean_inputs(wacom);
|
|
return -ENOMEM;
|
|
}
|
|
|
|
wacom_wac->pen_input->name = wacom_wac->pen_name;
|
|
wacom_wac->touch_input->name = wacom_wac->touch_name;
|
|
wacom_wac->pad_input->name = wacom_wac->pad_name;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wacom_register_inputs(struct wacom *wacom)
|
|
{
|
|
struct input_dev *pen_input_dev, *touch_input_dev, *pad_input_dev;
|
|
struct wacom_wac *wacom_wac = &(wacom->wacom_wac);
|
|
int error = 0;
|
|
|
|
pen_input_dev = wacom_wac->pen_input;
|
|
touch_input_dev = wacom_wac->touch_input;
|
|
pad_input_dev = wacom_wac->pad_input;
|
|
|
|
if (!pen_input_dev || !touch_input_dev || !pad_input_dev)
|
|
return -EINVAL;
|
|
|
|
error = wacom_setup_pen_input_capabilities(pen_input_dev, wacom_wac);
|
|
if (error) {
|
|
/* no pen in use on this interface */
|
|
input_free_device(pen_input_dev);
|
|
wacom_wac->pen_input = NULL;
|
|
pen_input_dev = NULL;
|
|
} else {
|
|
error = input_register_device(pen_input_dev);
|
|
if (error)
|
|
goto fail_register_pen_input;
|
|
wacom_wac->pen_registered = true;
|
|
}
|
|
|
|
error = wacom_setup_touch_input_capabilities(touch_input_dev, wacom_wac);
|
|
if (error) {
|
|
/* no touch in use on this interface */
|
|
input_free_device(touch_input_dev);
|
|
wacom_wac->touch_input = NULL;
|
|
touch_input_dev = NULL;
|
|
} else {
|
|
error = input_register_device(touch_input_dev);
|
|
if (error)
|
|
goto fail_register_touch_input;
|
|
wacom_wac->touch_registered = true;
|
|
}
|
|
|
|
error = wacom_setup_pad_input_capabilities(pad_input_dev, wacom_wac);
|
|
if (error) {
|
|
/* no pad in use on this interface */
|
|
input_free_device(pad_input_dev);
|
|
wacom_wac->pad_input = NULL;
|
|
pad_input_dev = NULL;
|
|
} else {
|
|
error = input_register_device(pad_input_dev);
|
|
if (error)
|
|
goto fail_register_pad_input;
|
|
wacom_wac->pad_registered = true;
|
|
|
|
error = wacom_initialize_leds(wacom);
|
|
if (error)
|
|
goto fail_leds;
|
|
|
|
error = wacom_initialize_remote(wacom);
|
|
if (error)
|
|
goto fail_remote;
|
|
}
|
|
|
|
return 0;
|
|
|
|
fail_remote:
|
|
wacom_destroy_leds(wacom);
|
|
fail_leds:
|
|
input_unregister_device(pad_input_dev);
|
|
pad_input_dev = NULL;
|
|
wacom_wac->pad_registered = false;
|
|
fail_register_pad_input:
|
|
if (touch_input_dev)
|
|
input_unregister_device(touch_input_dev);
|
|
wacom_wac->touch_input = NULL;
|
|
wacom_wac->touch_registered = false;
|
|
fail_register_touch_input:
|
|
if (pen_input_dev)
|
|
input_unregister_device(pen_input_dev);
|
|
wacom_wac->pen_input = NULL;
|
|
wacom_wac->pen_registered = false;
|
|
fail_register_pen_input:
|
|
return error;
|
|
}
|
|
|
|
/*
|
|
* Not all devices report physical dimensions from HID.
|
|
* Compute the default from hardcoded logical dimension
|
|
* and resolution before driver overwrites them.
|
|
*/
|
|
static void wacom_set_default_phy(struct wacom_features *features)
|
|
{
|
|
if (features->x_resolution) {
|
|
features->x_phy = (features->x_max * 100) /
|
|
features->x_resolution;
|
|
features->y_phy = (features->y_max * 100) /
|
|
features->y_resolution;
|
|
}
|
|
}
|
|
|
|
static void wacom_calculate_res(struct wacom_features *features)
|
|
{
|
|
/* set unit to "100th of a mm" for devices not reported by HID */
|
|
if (!features->unit) {
|
|
features->unit = 0x11;
|
|
features->unitExpo = -3;
|
|
}
|
|
|
|
features->x_resolution = wacom_calc_hid_res(features->x_max,
|
|
features->x_phy,
|
|
features->unit,
|
|
features->unitExpo);
|
|
features->y_resolution = wacom_calc_hid_res(features->y_max,
|
|
features->y_phy,
|
|
features->unit,
|
|
features->unitExpo);
|
|
}
|
|
|
|
static void wacom_wireless_work(struct work_struct *work)
|
|
{
|
|
struct wacom *wacom = container_of(work, struct wacom, work);
|
|
struct usb_device *usbdev = wacom->usbdev;
|
|
struct wacom_wac *wacom_wac = &wacom->wacom_wac;
|
|
struct hid_device *hdev1, *hdev2;
|
|
struct wacom *wacom1, *wacom2;
|
|
struct wacom_wac *wacom_wac1, *wacom_wac2;
|
|
int error;
|
|
|
|
/*
|
|
* Regardless if this is a disconnect or a new tablet,
|
|
* remove any existing input and battery devices.
|
|
*/
|
|
|
|
wacom_destroy_battery(wacom);
|
|
|
|
/* Stylus interface */
|
|
hdev1 = usb_get_intfdata(usbdev->config->interface[1]);
|
|
wacom1 = hid_get_drvdata(hdev1);
|
|
wacom_wac1 = &(wacom1->wacom_wac);
|
|
wacom_clean_inputs(wacom1);
|
|
|
|
/* Touch interface */
|
|
hdev2 = usb_get_intfdata(usbdev->config->interface[2]);
|
|
wacom2 = hid_get_drvdata(hdev2);
|
|
wacom_wac2 = &(wacom2->wacom_wac);
|
|
wacom_clean_inputs(wacom2);
|
|
|
|
if (wacom_wac->pid == 0) {
|
|
hid_info(wacom->hdev, "wireless tablet disconnected\n");
|
|
wacom_wac1->shared->type = 0;
|
|
} else {
|
|
const struct hid_device_id *id = wacom_ids;
|
|
|
|
hid_info(wacom->hdev, "wireless tablet connected with PID %x\n",
|
|
wacom_wac->pid);
|
|
|
|
while (id->bus) {
|
|
if (id->vendor == USB_VENDOR_ID_WACOM &&
|
|
id->product == wacom_wac->pid)
|
|
break;
|
|
id++;
|
|
}
|
|
|
|
if (!id->bus) {
|
|
hid_info(wacom->hdev, "ignoring unknown PID.\n");
|
|
return;
|
|
}
|
|
|
|
/* Stylus interface */
|
|
wacom_wac1->features =
|
|
*((struct wacom_features *)id->driver_data);
|
|
wacom_wac1->features.device_type |= WACOM_DEVICETYPE_PEN;
|
|
if (wacom_wac1->features.type != INTUOSHT &&
|
|
wacom_wac1->features.type != BAMBOO_PT)
|
|
wacom_wac1->features.device_type |= WACOM_DEVICETYPE_PAD;
|
|
wacom_set_default_phy(&wacom_wac1->features);
|
|
wacom_calculate_res(&wacom_wac1->features);
|
|
snprintf(wacom_wac1->pen_name, WACOM_NAME_MAX, "%s (WL) Pen",
|
|
wacom_wac1->features.name);
|
|
snprintf(wacom_wac1->pad_name, WACOM_NAME_MAX, "%s (WL) Pad",
|
|
wacom_wac1->features.name);
|
|
wacom_wac1->shared->touch_max = wacom_wac1->features.touch_max;
|
|
wacom_wac1->shared->type = wacom_wac1->features.type;
|
|
wacom_wac1->pid = wacom_wac->pid;
|
|
error = wacom_allocate_inputs(wacom1) ||
|
|
wacom_register_inputs(wacom1);
|
|
if (error)
|
|
goto fail;
|
|
|
|
/* Touch interface */
|
|
if (wacom_wac1->features.touch_max ||
|
|
wacom_wac1->features.type == INTUOSHT) {
|
|
wacom_wac2->features =
|
|
*((struct wacom_features *)id->driver_data);
|
|
wacom_wac2->features.pktlen = WACOM_PKGLEN_BBTOUCH3;
|
|
wacom_set_default_phy(&wacom_wac2->features);
|
|
wacom_wac2->features.x_max = wacom_wac2->features.y_max = 4096;
|
|
wacom_calculate_res(&wacom_wac2->features);
|
|
snprintf(wacom_wac2->touch_name, WACOM_NAME_MAX,
|
|
"%s (WL) Finger",wacom_wac2->features.name);
|
|
snprintf(wacom_wac2->pad_name, WACOM_NAME_MAX,
|
|
"%s (WL) Pad",wacom_wac2->features.name);
|
|
if (wacom_wac1->features.touch_max)
|
|
wacom_wac2->features.device_type |= WACOM_DEVICETYPE_TOUCH;
|
|
if (wacom_wac1->features.type == INTUOSHT ||
|
|
wacom_wac1->features.type == BAMBOO_PT)
|
|
wacom_wac2->features.device_type |= WACOM_DEVICETYPE_PAD;
|
|
wacom_wac2->pid = wacom_wac->pid;
|
|
error = wacom_allocate_inputs(wacom2) ||
|
|
wacom_register_inputs(wacom2);
|
|
if (error)
|
|
goto fail;
|
|
|
|
if (wacom_wac1->features.type == INTUOSHT &&
|
|
wacom_wac1->features.touch_max)
|
|
wacom_wac->shared->touch_input = wacom_wac2->touch_input;
|
|
}
|
|
|
|
error = wacom_initialize_battery(wacom);
|
|
if (error)
|
|
goto fail;
|
|
}
|
|
|
|
return;
|
|
|
|
fail:
|
|
wacom_clean_inputs(wacom1);
|
|
wacom_clean_inputs(wacom2);
|
|
return;
|
|
}
|
|
|
|
void wacom_battery_work(struct work_struct *work)
|
|
{
|
|
struct wacom *wacom = container_of(work, struct wacom, work);
|
|
|
|
if ((wacom->wacom_wac.features.quirks & WACOM_QUIRK_BATTERY) &&
|
|
!wacom->battery) {
|
|
wacom_initialize_battery(wacom);
|
|
}
|
|
else if (!(wacom->wacom_wac.features.quirks & WACOM_QUIRK_BATTERY) &&
|
|
wacom->battery) {
|
|
wacom_destroy_battery(wacom);
|
|
}
|
|
}
|
|
|
|
static size_t wacom_compute_pktlen(struct hid_device *hdev)
|
|
{
|
|
struct hid_report_enum *report_enum;
|
|
struct hid_report *report;
|
|
size_t size = 0;
|
|
|
|
report_enum = hdev->report_enum + HID_INPUT_REPORT;
|
|
|
|
list_for_each_entry(report, &report_enum->report_list, list) {
|
|
size_t report_size = hid_report_len(report);
|
|
if (report_size > size)
|
|
size = report_size;
|
|
}
|
|
|
|
return size;
|
|
}
|
|
|
|
static void wacom_update_name(struct wacom *wacom)
|
|
{
|
|
struct wacom_wac *wacom_wac = &wacom->wacom_wac;
|
|
struct wacom_features *features = &wacom_wac->features;
|
|
char name[WACOM_NAME_MAX];
|
|
|
|
/* Generic devices name unspecified */
|
|
if ((features->type == HID_GENERIC) && !strcmp("Wacom HID", features->name)) {
|
|
if (strstr(wacom->hdev->name, "Wacom") ||
|
|
strstr(wacom->hdev->name, "wacom") ||
|
|
strstr(wacom->hdev->name, "WACOM")) {
|
|
/* name is in HID descriptor, use it */
|
|
strlcpy(name, wacom->hdev->name, sizeof(name));
|
|
|
|
/* strip out excess whitespaces */
|
|
while (1) {
|
|
char *gap = strstr(name, " ");
|
|
if (gap == NULL)
|
|
break;
|
|
/* shift everything including the terminator */
|
|
memmove(gap, gap+1, strlen(gap));
|
|
}
|
|
/* get rid of trailing whitespace */
|
|
if (name[strlen(name)-1] == ' ')
|
|
name[strlen(name)-1] = '\0';
|
|
} else {
|
|
/* no meaningful name retrieved. use product ID */
|
|
snprintf(name, sizeof(name),
|
|
"%s %X", features->name, wacom->hdev->product);
|
|
}
|
|
} else {
|
|
strlcpy(name, features->name, sizeof(name));
|
|
}
|
|
|
|
/* Append the device type to the name */
|
|
snprintf(wacom_wac->pen_name, sizeof(wacom_wac->pen_name),
|
|
"%s Pen", name);
|
|
snprintf(wacom_wac->touch_name, sizeof(wacom_wac->touch_name),
|
|
"%s Finger", name);
|
|
snprintf(wacom_wac->pad_name, sizeof(wacom_wac->pad_name),
|
|
"%s Pad", name);
|
|
}
|
|
|
|
static int wacom_probe(struct hid_device *hdev,
|
|
const struct hid_device_id *id)
|
|
{
|
|
struct usb_interface *intf = to_usb_interface(hdev->dev.parent);
|
|
struct usb_device *dev = interface_to_usbdev(intf);
|
|
struct wacom *wacom;
|
|
struct wacom_wac *wacom_wac;
|
|
struct wacom_features *features;
|
|
int error;
|
|
unsigned int connect_mask = HID_CONNECT_HIDRAW;
|
|
|
|
if (!id->driver_data)
|
|
return -EINVAL;
|
|
|
|
hdev->quirks |= HID_QUIRK_NO_INIT_REPORTS;
|
|
|
|
/* hid-core sets this quirk for the boot interface */
|
|
hdev->quirks &= ~HID_QUIRK_NOGET;
|
|
|
|
wacom = kzalloc(sizeof(struct wacom), GFP_KERNEL);
|
|
if (!wacom)
|
|
return -ENOMEM;
|
|
|
|
hid_set_drvdata(hdev, wacom);
|
|
wacom->hdev = hdev;
|
|
|
|
/* ask for the report descriptor to be loaded by HID */
|
|
error = hid_parse(hdev);
|
|
if (error) {
|
|
hid_err(hdev, "parse failed\n");
|
|
goto fail_parse;
|
|
}
|
|
|
|
wacom_wac = &wacom->wacom_wac;
|
|
wacom_wac->features = *((struct wacom_features *)id->driver_data);
|
|
features = &wacom_wac->features;
|
|
features->pktlen = wacom_compute_pktlen(hdev);
|
|
if (features->pktlen > WACOM_PKGLEN_MAX) {
|
|
error = -EINVAL;
|
|
goto fail_pktlen;
|
|
}
|
|
|
|
if (features->check_for_hid_type && features->hid_type != hdev->type) {
|
|
error = -ENODEV;
|
|
goto fail_type;
|
|
}
|
|
|
|
wacom->usbdev = dev;
|
|
wacom->intf = intf;
|
|
mutex_init(&wacom->lock);
|
|
INIT_WORK(&wacom->work, wacom_wireless_work);
|
|
|
|
error = wacom_allocate_inputs(wacom);
|
|
if (error)
|
|
goto fail_allocate_inputs;
|
|
|
|
/*
|
|
* Bamboo Pad has a generic hid handling for the Pen, and we switch it
|
|
* into debug mode for the touch part.
|
|
* We ignore the other interfaces.
|
|
*/
|
|
if (features->type == BAMBOO_PAD) {
|
|
if (features->pktlen == WACOM_PKGLEN_PENABLED) {
|
|
features->type = HID_GENERIC;
|
|
} else if ((features->pktlen != WACOM_PKGLEN_BPAD_TOUCH) &&
|
|
(features->pktlen != WACOM_PKGLEN_BPAD_TOUCH_USB)) {
|
|
error = -ENODEV;
|
|
goto fail_shared_data;
|
|
}
|
|
}
|
|
|
|
/* set the default size in case we do not get them from hid */
|
|
wacom_set_default_phy(features);
|
|
|
|
/* Retrieve the physical and logical size for touch devices */
|
|
wacom_retrieve_hid_descriptor(hdev, features);
|
|
wacom_setup_device_quirks(wacom);
|
|
|
|
if (features->device_type == WACOM_DEVICETYPE_NONE &&
|
|
features->type != WIRELESS) {
|
|
error = features->type == HID_GENERIC ? -ENODEV : 0;
|
|
|
|
dev_warn(&hdev->dev, "Unknown device_type for '%s'. %s.",
|
|
hdev->name,
|
|
error ? "Ignoring" : "Assuming pen");
|
|
|
|
if (error)
|
|
goto fail_shared_data;
|
|
|
|
features->device_type |= WACOM_DEVICETYPE_PEN;
|
|
}
|
|
|
|
wacom_calculate_res(features);
|
|
|
|
wacom_update_name(wacom);
|
|
|
|
error = wacom_add_shared_data(hdev);
|
|
if (error)
|
|
goto fail_shared_data;
|
|
|
|
if (!(features->device_type & WACOM_DEVICETYPE_WL_MONITOR) &&
|
|
(features->quirks & WACOM_QUIRK_BATTERY)) {
|
|
error = wacom_initialize_battery(wacom);
|
|
if (error)
|
|
goto fail_battery;
|
|
}
|
|
|
|
error = wacom_register_inputs(wacom);
|
|
if (error)
|
|
goto fail_register_inputs;
|
|
|
|
if (hdev->bus == BUS_BLUETOOTH) {
|
|
error = device_create_file(&hdev->dev, &dev_attr_speed);
|
|
if (error)
|
|
hid_warn(hdev,
|
|
"can't create sysfs speed attribute err: %d\n",
|
|
error);
|
|
}
|
|
|
|
if (features->type == HID_GENERIC)
|
|
connect_mask |= HID_CONNECT_DRIVER;
|
|
|
|
/* Regular HID work starts now */
|
|
error = hid_hw_start(hdev, connect_mask);
|
|
if (error) {
|
|
hid_err(hdev, "hw start failed\n");
|
|
goto fail_hw_start;
|
|
}
|
|
|
|
/* Note that if query fails it is not a hard failure */
|
|
wacom_query_tablet_data(hdev, features);
|
|
|
|
if (features->device_type & WACOM_DEVICETYPE_WL_MONITOR)
|
|
error = hid_hw_open(hdev);
|
|
|
|
if (wacom_wac->features.type == INTUOSHT &&
|
|
wacom_wac->features.device_type & WACOM_DEVICETYPE_TOUCH) {
|
|
wacom_wac->shared->touch_input = wacom_wac->touch_input;
|
|
}
|
|
|
|
return 0;
|
|
|
|
fail_hw_start:
|
|
if (hdev->bus == BUS_BLUETOOTH)
|
|
device_remove_file(&hdev->dev, &dev_attr_speed);
|
|
fail_register_inputs:
|
|
wacom_clean_inputs(wacom);
|
|
wacom_destroy_battery(wacom);
|
|
fail_battery:
|
|
wacom_remove_shared_data(wacom);
|
|
fail_shared_data:
|
|
wacom_clean_inputs(wacom);
|
|
fail_allocate_inputs:
|
|
fail_type:
|
|
fail_pktlen:
|
|
fail_parse:
|
|
kfree(wacom);
|
|
hid_set_drvdata(hdev, NULL);
|
|
return error;
|
|
}
|
|
|
|
static void wacom_remove(struct hid_device *hdev)
|
|
{
|
|
struct wacom *wacom = hid_get_drvdata(hdev);
|
|
|
|
hid_hw_stop(hdev);
|
|
|
|
cancel_work_sync(&wacom->work);
|
|
wacom_clean_inputs(wacom);
|
|
if (hdev->bus == BUS_BLUETOOTH)
|
|
device_remove_file(&hdev->dev, &dev_attr_speed);
|
|
wacom_destroy_battery(wacom);
|
|
wacom_remove_shared_data(wacom);
|
|
|
|
hid_set_drvdata(hdev, NULL);
|
|
kfree(wacom);
|
|
}
|
|
|
|
#ifdef CONFIG_PM
|
|
static int wacom_resume(struct hid_device *hdev)
|
|
{
|
|
struct wacom *wacom = hid_get_drvdata(hdev);
|
|
struct wacom_features *features = &wacom->wacom_wac.features;
|
|
|
|
mutex_lock(&wacom->lock);
|
|
|
|
/* switch to wacom mode first */
|
|
wacom_query_tablet_data(hdev, features);
|
|
wacom_led_control(wacom);
|
|
|
|
mutex_unlock(&wacom->lock);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int wacom_reset_resume(struct hid_device *hdev)
|
|
{
|
|
return wacom_resume(hdev);
|
|
}
|
|
#endif /* CONFIG_PM */
|
|
|
|
static struct hid_driver wacom_driver = {
|
|
.name = "wacom",
|
|
.id_table = wacom_ids,
|
|
.probe = wacom_probe,
|
|
.remove = wacom_remove,
|
|
.report = wacom_wac_report,
|
|
#ifdef CONFIG_PM
|
|
.resume = wacom_resume,
|
|
.reset_resume = wacom_reset_resume,
|
|
#endif
|
|
.raw_event = wacom_raw_event,
|
|
};
|
|
module_hid_driver(wacom_driver);
|
|
|
|
MODULE_VERSION(DRIVER_VERSION);
|
|
MODULE_AUTHOR(DRIVER_AUTHOR);
|
|
MODULE_DESCRIPTION(DRIVER_DESC);
|
|
MODULE_LICENSE(DRIVER_LICENSE);
|