423 lines
11 KiB
C
423 lines
11 KiB
C
/*
|
|
* Driver for an envelope detector using a DAC and a comparator
|
|
*
|
|
* Copyright (C) 2016 Axentia Technologies AB
|
|
*
|
|
* Author: Peter Rosin <peda@axentia.se>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify
|
|
* it under the terms of the GNU General Public License version 2 as
|
|
* published by the Free Software Foundation.
|
|
*/
|
|
|
|
/*
|
|
* The DAC is used to find the peak level of an alternating voltage input
|
|
* signal by a binary search using the output of a comparator wired to
|
|
* an interrupt pin. Like so:
|
|
* _
|
|
* | \
|
|
* input +------>-------|+ \
|
|
* | \
|
|
* .-------. | }---.
|
|
* | | | / |
|
|
* | dac|-->--|- / |
|
|
* | | |_/ |
|
|
* | | |
|
|
* | | |
|
|
* | irq|------<-------'
|
|
* | |
|
|
* '-------'
|
|
*/
|
|
|
|
#include <linux/completion.h>
|
|
#include <linux/device.h>
|
|
#include <linux/err.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/mutex.h>
|
|
#include <linux/iio/consumer.h>
|
|
#include <linux/iio/iio.h>
|
|
#include <linux/iio/sysfs.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/irq.h>
|
|
#include <linux/of.h>
|
|
#include <linux/of_device.h>
|
|
#include <linux/platform_device.h>
|
|
#include <linux/spinlock.h>
|
|
#include <linux/workqueue.h>
|
|
|
|
struct envelope {
|
|
spinlock_t comp_lock; /* protects comp */
|
|
int comp;
|
|
|
|
struct mutex read_lock; /* protects everything else */
|
|
|
|
int comp_irq;
|
|
u32 comp_irq_trigger;
|
|
u32 comp_irq_trigger_inv;
|
|
|
|
struct iio_channel *dac;
|
|
struct delayed_work comp_timeout;
|
|
|
|
unsigned int comp_interval;
|
|
bool invert;
|
|
u32 dac_max;
|
|
|
|
int high;
|
|
int level;
|
|
int low;
|
|
|
|
struct completion done;
|
|
};
|
|
|
|
/*
|
|
* The envelope_detector_comp_latch function works together with the compare
|
|
* interrupt service routine below (envelope_detector_comp_isr) as a latch
|
|
* (one-bit memory) for if the interrupt has triggered since last calling
|
|
* this function.
|
|
* The ..._comp_isr function disables the interrupt so that the cpu does not
|
|
* need to service a possible interrupt flood from the comparator when no-one
|
|
* cares anyway, and this ..._comp_latch function reenables them again if
|
|
* needed.
|
|
*/
|
|
static int envelope_detector_comp_latch(struct envelope *env)
|
|
{
|
|
int comp;
|
|
|
|
spin_lock_irq(&env->comp_lock);
|
|
comp = env->comp;
|
|
env->comp = 0;
|
|
spin_unlock_irq(&env->comp_lock);
|
|
|
|
if (!comp)
|
|
return 0;
|
|
|
|
/*
|
|
* The irq was disabled, and is reenabled just now.
|
|
* But there might have been a pending irq that
|
|
* happened while the irq was disabled that fires
|
|
* just as the irq is reenabled. That is not what
|
|
* is desired.
|
|
*/
|
|
enable_irq(env->comp_irq);
|
|
|
|
/* So, synchronize this possibly pending irq... */
|
|
synchronize_irq(env->comp_irq);
|
|
|
|
/* ...and redo the whole dance. */
|
|
spin_lock_irq(&env->comp_lock);
|
|
comp = env->comp;
|
|
env->comp = 0;
|
|
spin_unlock_irq(&env->comp_lock);
|
|
|
|
if (comp)
|
|
enable_irq(env->comp_irq);
|
|
|
|
return 1;
|
|
}
|
|
|
|
static irqreturn_t envelope_detector_comp_isr(int irq, void *ctx)
|
|
{
|
|
struct envelope *env = ctx;
|
|
|
|
spin_lock(&env->comp_lock);
|
|
env->comp = 1;
|
|
disable_irq_nosync(env->comp_irq);
|
|
spin_unlock(&env->comp_lock);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static void envelope_detector_setup_compare(struct envelope *env)
|
|
{
|
|
int ret;
|
|
|
|
/*
|
|
* Do a binary search for the peak input level, and stop
|
|
* when that level is "trapped" between two adjacent DAC
|
|
* values.
|
|
* When invert is active, use the midpoint floor so that
|
|
* env->level ends up as env->low when the termination
|
|
* criteria below is fulfilled, and use the midpoint
|
|
* ceiling when invert is not active so that env->level
|
|
* ends up as env->high in that case.
|
|
*/
|
|
env->level = (env->high + env->low + !env->invert) / 2;
|
|
|
|
if (env->high == env->low + 1) {
|
|
complete(&env->done);
|
|
return;
|
|
}
|
|
|
|
/* Set a "safe" DAC level (if there is such a thing)... */
|
|
ret = iio_write_channel_raw(env->dac, env->invert ? 0 : env->dac_max);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
/* ...clear the comparison result... */
|
|
envelope_detector_comp_latch(env);
|
|
|
|
/* ...set the real DAC level... */
|
|
ret = iio_write_channel_raw(env->dac, env->level);
|
|
if (ret < 0)
|
|
goto err;
|
|
|
|
/* ...and wait for a bit to see if the latch catches anything. */
|
|
schedule_delayed_work(&env->comp_timeout,
|
|
msecs_to_jiffies(env->comp_interval));
|
|
return;
|
|
|
|
err:
|
|
env->level = ret;
|
|
complete(&env->done);
|
|
}
|
|
|
|
static void envelope_detector_timeout(struct work_struct *work)
|
|
{
|
|
struct envelope *env = container_of(work, struct envelope,
|
|
comp_timeout.work);
|
|
|
|
/* Adjust low/high depending on the latch content... */
|
|
if (!envelope_detector_comp_latch(env) ^ !env->invert)
|
|
env->low = env->level;
|
|
else
|
|
env->high = env->level;
|
|
|
|
/* ...and continue the search. */
|
|
envelope_detector_setup_compare(env);
|
|
}
|
|
|
|
static int envelope_detector_read_raw(struct iio_dev *indio_dev,
|
|
struct iio_chan_spec const *chan,
|
|
int *val, int *val2, long mask)
|
|
{
|
|
struct envelope *env = iio_priv(indio_dev);
|
|
int ret;
|
|
|
|
switch (mask) {
|
|
case IIO_CHAN_INFO_RAW:
|
|
/*
|
|
* When invert is active, start with high=max+1 and low=0
|
|
* since we will end up with the low value when the
|
|
* termination criteria is fulfilled (rounding down). And
|
|
* start with high=max and low=-1 when invert is not active
|
|
* since we will end up with the high value in that case.
|
|
* This ensures that the returned value in both cases are
|
|
* in the same range as the DAC and is a value that has not
|
|
* triggered the comparator.
|
|
*/
|
|
mutex_lock(&env->read_lock);
|
|
env->high = env->dac_max + env->invert;
|
|
env->low = -1 + env->invert;
|
|
envelope_detector_setup_compare(env);
|
|
wait_for_completion(&env->done);
|
|
if (env->level < 0) {
|
|
ret = env->level;
|
|
goto err_unlock;
|
|
}
|
|
*val = env->invert ? env->dac_max - env->level : env->level;
|
|
mutex_unlock(&env->read_lock);
|
|
|
|
return IIO_VAL_INT;
|
|
|
|
case IIO_CHAN_INFO_SCALE:
|
|
return iio_read_channel_scale(env->dac, val, val2);
|
|
}
|
|
|
|
return -EINVAL;
|
|
|
|
err_unlock:
|
|
mutex_unlock(&env->read_lock);
|
|
return ret;
|
|
}
|
|
|
|
static ssize_t envelope_show_invert(struct iio_dev *indio_dev,
|
|
uintptr_t private,
|
|
struct iio_chan_spec const *ch, char *buf)
|
|
{
|
|
struct envelope *env = iio_priv(indio_dev);
|
|
|
|
return sprintf(buf, "%u\n", env->invert);
|
|
}
|
|
|
|
static ssize_t envelope_store_invert(struct iio_dev *indio_dev,
|
|
uintptr_t private,
|
|
struct iio_chan_spec const *ch,
|
|
const char *buf, size_t len)
|
|
{
|
|
struct envelope *env = iio_priv(indio_dev);
|
|
unsigned long invert;
|
|
int ret;
|
|
u32 trigger;
|
|
|
|
ret = kstrtoul(buf, 0, &invert);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (invert > 1)
|
|
return -EINVAL;
|
|
|
|
trigger = invert ? env->comp_irq_trigger_inv : env->comp_irq_trigger;
|
|
|
|
mutex_lock(&env->read_lock);
|
|
if (invert != env->invert)
|
|
ret = irq_set_irq_type(env->comp_irq, trigger);
|
|
if (!ret) {
|
|
env->invert = invert;
|
|
ret = len;
|
|
}
|
|
mutex_unlock(&env->read_lock);
|
|
|
|
return ret;
|
|
}
|
|
|
|
static ssize_t envelope_show_comp_interval(struct iio_dev *indio_dev,
|
|
uintptr_t private,
|
|
struct iio_chan_spec const *ch,
|
|
char *buf)
|
|
{
|
|
struct envelope *env = iio_priv(indio_dev);
|
|
|
|
return sprintf(buf, "%u\n", env->comp_interval);
|
|
}
|
|
|
|
static ssize_t envelope_store_comp_interval(struct iio_dev *indio_dev,
|
|
uintptr_t private,
|
|
struct iio_chan_spec const *ch,
|
|
const char *buf, size_t len)
|
|
{
|
|
struct envelope *env = iio_priv(indio_dev);
|
|
unsigned long interval;
|
|
int ret;
|
|
|
|
ret = kstrtoul(buf, 0, &interval);
|
|
if (ret < 0)
|
|
return ret;
|
|
if (interval > 1000)
|
|
return -EINVAL;
|
|
|
|
mutex_lock(&env->read_lock);
|
|
env->comp_interval = interval;
|
|
mutex_unlock(&env->read_lock);
|
|
|
|
return len;
|
|
}
|
|
|
|
static const struct iio_chan_spec_ext_info envelope_detector_ext_info[] = {
|
|
{ .name = "invert",
|
|
.read = envelope_show_invert,
|
|
.write = envelope_store_invert, },
|
|
{ .name = "compare_interval",
|
|
.read = envelope_show_comp_interval,
|
|
.write = envelope_store_comp_interval, },
|
|
{ /* sentinel */ }
|
|
};
|
|
|
|
static const struct iio_chan_spec envelope_detector_iio_channel = {
|
|
.type = IIO_ALTVOLTAGE,
|
|
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW)
|
|
| BIT(IIO_CHAN_INFO_SCALE),
|
|
.ext_info = envelope_detector_ext_info,
|
|
.indexed = 1,
|
|
};
|
|
|
|
static const struct iio_info envelope_detector_info = {
|
|
.read_raw = &envelope_detector_read_raw,
|
|
.driver_module = THIS_MODULE,
|
|
};
|
|
|
|
static int envelope_detector_probe(struct platform_device *pdev)
|
|
{
|
|
struct device *dev = &pdev->dev;
|
|
struct iio_dev *indio_dev;
|
|
struct envelope *env;
|
|
enum iio_chan_type type;
|
|
int ret;
|
|
|
|
indio_dev = devm_iio_device_alloc(dev, sizeof(*env));
|
|
if (!indio_dev)
|
|
return -ENOMEM;
|
|
|
|
platform_set_drvdata(pdev, indio_dev);
|
|
env = iio_priv(indio_dev);
|
|
env->comp_interval = 50; /* some sensible default? */
|
|
|
|
spin_lock_init(&env->comp_lock);
|
|
mutex_init(&env->read_lock);
|
|
init_completion(&env->done);
|
|
INIT_DELAYED_WORK(&env->comp_timeout, envelope_detector_timeout);
|
|
|
|
indio_dev->name = dev_name(dev);
|
|
indio_dev->dev.parent = dev;
|
|
indio_dev->dev.of_node = dev->of_node;
|
|
indio_dev->info = &envelope_detector_info;
|
|
indio_dev->channels = &envelope_detector_iio_channel;
|
|
indio_dev->num_channels = 1;
|
|
|
|
env->dac = devm_iio_channel_get(dev, "dac");
|
|
if (IS_ERR(env->dac)) {
|
|
if (PTR_ERR(env->dac) != -EPROBE_DEFER)
|
|
dev_err(dev, "failed to get dac input channel\n");
|
|
return PTR_ERR(env->dac);
|
|
}
|
|
|
|
env->comp_irq = platform_get_irq_byname(pdev, "comp");
|
|
if (env->comp_irq < 0) {
|
|
if (env->comp_irq != -EPROBE_DEFER)
|
|
dev_err(dev, "failed to get compare interrupt\n");
|
|
return env->comp_irq;
|
|
}
|
|
|
|
ret = devm_request_irq(dev, env->comp_irq, envelope_detector_comp_isr,
|
|
0, "envelope-detector", env);
|
|
if (ret) {
|
|
if (ret != -EPROBE_DEFER)
|
|
dev_err(dev, "failed to request interrupt\n");
|
|
return ret;
|
|
}
|
|
env->comp_irq_trigger = irq_get_trigger_type(env->comp_irq);
|
|
if (env->comp_irq_trigger & IRQF_TRIGGER_RISING)
|
|
env->comp_irq_trigger_inv |= IRQF_TRIGGER_FALLING;
|
|
if (env->comp_irq_trigger & IRQF_TRIGGER_FALLING)
|
|
env->comp_irq_trigger_inv |= IRQF_TRIGGER_RISING;
|
|
if (env->comp_irq_trigger & IRQF_TRIGGER_HIGH)
|
|
env->comp_irq_trigger_inv |= IRQF_TRIGGER_LOW;
|
|
if (env->comp_irq_trigger & IRQF_TRIGGER_LOW)
|
|
env->comp_irq_trigger_inv |= IRQF_TRIGGER_HIGH;
|
|
|
|
ret = iio_get_channel_type(env->dac, &type);
|
|
if (ret < 0)
|
|
return ret;
|
|
|
|
if (type != IIO_VOLTAGE) {
|
|
dev_err(dev, "dac is of the wrong type\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
ret = iio_read_max_channel_raw(env->dac, &env->dac_max);
|
|
if (ret < 0) {
|
|
dev_err(dev, "dac does not indicate its raw maximum value\n");
|
|
return ret;
|
|
}
|
|
|
|
return devm_iio_device_register(dev, indio_dev);
|
|
}
|
|
|
|
static const struct of_device_id envelope_detector_match[] = {
|
|
{ .compatible = "axentia,tse850-envelope-detector", },
|
|
{ /* sentinel */ }
|
|
};
|
|
MODULE_DEVICE_TABLE(of, envelope_detector_match);
|
|
|
|
static struct platform_driver envelope_detector_driver = {
|
|
.probe = envelope_detector_probe,
|
|
.driver = {
|
|
.name = "iio-envelope-detector",
|
|
.of_match_table = envelope_detector_match,
|
|
},
|
|
};
|
|
module_platform_driver(envelope_detector_driver);
|
|
|
|
MODULE_DESCRIPTION("Envelope detector using a DAC and a comparator");
|
|
MODULE_AUTHOR("Peter Rosin <peda@axentia.se>");
|
|
MODULE_LICENSE("GPL v2");
|