61 lines
1.6 KiB
Plaintext
61 lines
1.6 KiB
Plaintext
Qualcomm Bluetooth Chips
|
|
---------------------
|
|
|
|
This documents the binding structure and common properties for serial
|
|
attached Qualcomm devices.
|
|
|
|
Serial attached Qualcomm devices shall be a child node of the host UART
|
|
device the slave device is attached to.
|
|
|
|
Required properties:
|
|
- compatible: should contain one of the following:
|
|
* "qcom,qca6174-bt"
|
|
* "qcom,wcn3990-bt"
|
|
* "qcom,wcn3998-bt"
|
|
|
|
Optional properties for compatible string qcom,qca6174-bt:
|
|
|
|
- enable-gpios: gpio specifier used to enable chip
|
|
- clocks: clock provided to the controller (SUSCLK_32KHZ)
|
|
- firmware-name: specify the name of nvm firmware to load
|
|
|
|
Required properties for compatible string qcom,wcn399x-bt:
|
|
|
|
- vddio-supply: VDD_IO supply regulator handle.
|
|
- vddxo-supply: VDD_XO supply regulator handle.
|
|
- vddrf-supply: VDD_RF supply regulator handle.
|
|
- vddch0-supply: VDD_CH0 supply regulator handle.
|
|
|
|
Optional properties for compatible string qcom,wcn399x-bt:
|
|
|
|
- max-speed: see Documentation/devicetree/bindings/serial/slave-device.txt
|
|
- firmware-name: specify the name of nvm firmware to load
|
|
|
|
Examples:
|
|
|
|
serial@7570000 {
|
|
label = "BT-UART";
|
|
status = "okay";
|
|
|
|
bluetooth {
|
|
compatible = "qcom,qca6174-bt";
|
|
|
|
enable-gpios = <&pm8994_gpios 19 GPIO_ACTIVE_HIGH>;
|
|
clocks = <&divclk4>;
|
|
firmware-name = "nvm_00440302.bin";
|
|
};
|
|
};
|
|
|
|
serial@898000 {
|
|
bluetooth {
|
|
compatible = "qcom,wcn3990-bt";
|
|
|
|
vddio-supply = <&vreg_s4a_1p8>;
|
|
vddxo-supply = <&vreg_l7a_1p8>;
|
|
vddrf-supply = <&vreg_l17a_1p3>;
|
|
vddch0-supply = <&vreg_l25a_3p3>;
|
|
max-speed = <3200000>;
|
|
firmware-name = "crnv21.bin";
|
|
};
|
|
};
|